| // SPDX-License-Identifier: GPL-2.0 | |
| /* | |
| * Multiplexer driver for Analog Devices ADG792A/G Triple 4:1 mux | |
| * | |
| * Copyright (C) 2017 Axentia Technologies AB | |
| * | |
| * Author: Peter Rosin <peda@axentia.se> | |
| */ | |
| #include <linux/err.h> | |
| #include <linux/i2c.h> | |
| #include <linux/module.h> | |
| #include <linux/mux/driver.h> | |
| #include <linux/property.h> | |
| #define ADG792A_LDSW BIT(0) | |
| #define ADG792A_RESETB BIT(1) | |
| #define ADG792A_DISABLE(mux) (0x50 | (mux)) | |
| #define ADG792A_DISABLE_ALL (0x5f) | |
| #define ADG792A_MUX(mux, state) (0xc0 | (((mux) + 1) << 2) | (state)) | |
| #define ADG792A_MUX_ALL(state) (0xc0 | (state)) | |
| static int adg792a_write_cmd(struct i2c_client *i2c, u8 cmd, int reset) | |
| { | |
| u8 data = ADG792A_RESETB | ADG792A_LDSW; | |
| /* ADG792A_RESETB is active low, the chip resets when it is zero. */ | |
| if (reset) | |
| data &= ~ADG792A_RESETB; | |
| return i2c_smbus_write_byte_data(i2c, cmd, data); | |
| } | |
| static int adg792a_set(struct mux_control *mux, int state) | |
| { | |
| struct i2c_client *i2c = to_i2c_client(mux->chip->dev.parent); | |
| u8 cmd; | |
| if (mux->chip->controllers == 1) { | |
| /* parallel mux controller operation */ | |
| if (state == MUX_IDLE_DISCONNECT) | |
| cmd = ADG792A_DISABLE_ALL; | |
| else | |
| cmd = ADG792A_MUX_ALL(state); | |
| } else { | |
| unsigned int controller = mux_control_get_index(mux); | |
| if (state == MUX_IDLE_DISCONNECT) | |
| cmd = ADG792A_DISABLE(controller); | |
| else | |
| cmd = ADG792A_MUX(controller, state); | |
| } | |
| return adg792a_write_cmd(i2c, cmd, 0); | |
| } | |
| static const struct mux_control_ops adg792a_ops = { | |
| .set = adg792a_set, | |
| }; | |
| static int adg792a_probe(struct i2c_client *i2c) | |
| { | |
| struct device *dev = &i2c->dev; | |
| struct mux_chip *mux_chip; | |
| s32 idle_state[3]; | |
| u32 cells; | |
| int ret; | |
| int i; | |
| if (!i2c_check_functionality(i2c->adapter, I2C_FUNC_SMBUS_BYTE_DATA)) | |
| return -ENODEV; | |
| ret = device_property_read_u32(dev, "#mux-control-cells", &cells); | |
| if (ret < 0) | |
| return ret; | |
| if (cells >= 2) | |
| return -EINVAL; | |
| mux_chip = devm_mux_chip_alloc(dev, cells ? 3 : 1, 0); | |
| if (IS_ERR(mux_chip)) | |
| return PTR_ERR(mux_chip); | |
| mux_chip->ops = &adg792a_ops; | |
| ret = adg792a_write_cmd(i2c, ADG792A_DISABLE_ALL, 1); | |
| if (ret < 0) | |
| return ret; | |
| ret = device_property_read_u32_array(dev, "idle-state", | |
| (u32 *)idle_state, | |
| mux_chip->controllers); | |
| if (ret < 0) { | |
| idle_state[0] = MUX_IDLE_AS_IS; | |
| idle_state[1] = MUX_IDLE_AS_IS; | |
| idle_state[2] = MUX_IDLE_AS_IS; | |
| } | |
| for (i = 0; i < mux_chip->controllers; ++i) { | |
| struct mux_control *mux = &mux_chip->mux[i]; | |
| mux->states = 4; | |
| switch (idle_state[i]) { | |
| case MUX_IDLE_DISCONNECT: | |
| case MUX_IDLE_AS_IS: | |
| case 0 ... 4: | |
| mux->idle_state = idle_state[i]; | |
| break; | |
| default: | |
| dev_err(dev, "invalid idle-state %d\n", idle_state[i]); | |
| return -EINVAL; | |
| } | |
| } | |
| ret = devm_mux_chip_register(dev, mux_chip); | |
| if (ret < 0) | |
| return ret; | |
| if (cells) | |
| dev_info(dev, "3x single pole quadruple throw muxes registered\n"); | |
| else | |
| dev_info(dev, "triple pole quadruple throw mux registered\n"); | |
| return 0; | |
| } | |
| static const struct i2c_device_id adg792a_id[] = { | |
| { .name = "adg792a", }, | |
| { .name = "adg792g", }, | |
| { } | |
| }; | |
| MODULE_DEVICE_TABLE(i2c, adg792a_id); | |
| static const struct of_device_id adg792a_of_match[] = { | |
| { .compatible = "adi,adg792a", }, | |
| { .compatible = "adi,adg792g", }, | |
| { } | |
| }; | |
| MODULE_DEVICE_TABLE(of, adg792a_of_match); | |
| static struct i2c_driver adg792a_driver = { | |
| .driver = { | |
| .name = "adg792a", | |
| .of_match_table = of_match_ptr(adg792a_of_match), | |
| }, | |
| .probe_new = adg792a_probe, | |
| .id_table = adg792a_id, | |
| }; | |
| module_i2c_driver(adg792a_driver); | |
| MODULE_DESCRIPTION("Analog Devices ADG792A/G Triple 4:1 mux driver"); | |
| MODULE_AUTHOR("Peter Rosin <peda@axentia.se>"); | |
| MODULE_LICENSE("GPL v2"); |