| /* | |
| * linux/fs/exec.c | |
| * | |
| * Copyright (C) 1991, 1992 Linus Torvalds | |
| */ | |
| /* | |
| * #!-checking implemented by tytso. | |
| */ | |
| /* | |
| * Demand-loading implemented 01.12.91 - no need to read anything but | |
| * the header into memory. The inode of the executable is put into | |
| * "current->executable", and page faults do the actual loading. Clean. | |
| * | |
| * Once more I can proudly say that linux stood up to being changed: it | |
| * was less than 2 hours work to get demand-loading completely implemented. | |
| * | |
| * Demand loading changed July 1993 by Eric Youngdale. Use mmap instead, | |
| * current->executable is only used by the procfs. This allows a dispatch | |
| * table to check for several different types of binary formats. We keep | |
| * trying until we recognize the file or we run out of supported binary | |
| * formats. | |
| */ | |
| #include <linux/slab.h> | |
| #include <linux/file.h> | |
| #include <linux/fdtable.h> | |
| #include <linux/mm.h> | |
| #include <linux/vmacache.h> | |
| #include <linux/stat.h> | |
| #include <linux/fcntl.h> | |
| #include <linux/swap.h> | |
| #include <linux/string.h> | |
| #include <linux/init.h> | |
| #include <linux/sched/mm.h> | |
| #include <linux/sched/coredump.h> | |
| #include <linux/sched/signal.h> | |
| #include <linux/sched/numa_balancing.h> | |
| #include <linux/sched/task.h> | |
| #include <linux/pagemap.h> | |
| #include <linux/perf_event.h> | |
| #include <linux/highmem.h> | |
| #include <linux/spinlock.h> | |
| #include <linux/key.h> | |
| #include <linux/personality.h> | |
| #include <linux/binfmts.h> | |
| #include <linux/utsname.h> | |
| #include <linux/pid_namespace.h> | |
| #include <linux/module.h> | |
| #include <linux/namei.h> | |
| #include <linux/mount.h> | |
| #include <linux/security.h> | |
| #include <linux/syscalls.h> | |
| #include <linux/tsacct_kern.h> | |
| #include <linux/cn_proc.h> | |
| #include <linux/audit.h> | |
| #include <linux/tracehook.h> | |
| #include <linux/kmod.h> | |
| #include <linux/fsnotify.h> | |
| #include <linux/fs_struct.h> | |
| #include <linux/pipe_fs_i.h> | |
| #include <linux/oom.h> | |
| #include <linux/compat.h> | |
| #include <linux/vmalloc.h> | |
| #include <linux/uaccess.h> | |
| #include <asm/mmu_context.h> | |
| #include <asm/tlb.h> | |
| #include <trace/events/task.h> | |
| #include "internal.h" | |
| #include <trace/events/sched.h> | |
| int suid_dumpable = 0; | |
| static LIST_HEAD(formats); | |
| static DEFINE_RWLOCK(binfmt_lock); | |
| void __register_binfmt(struct linux_binfmt * fmt, int insert) | |
| { | |
| BUG_ON(!fmt); | |
| if (WARN_ON(!fmt->load_binary)) | |
| return; | |
| write_lock(&binfmt_lock); | |
| insert ? list_add(&fmt->lh, &formats) : | |
| list_add_tail(&fmt->lh, &formats); | |
| write_unlock(&binfmt_lock); | |
| } | |
| EXPORT_SYMBOL(__register_binfmt); | |
| void unregister_binfmt(struct linux_binfmt * fmt) | |
| { | |
| write_lock(&binfmt_lock); | |
| list_del(&fmt->lh); | |
| write_unlock(&binfmt_lock); | |
| } | |
| EXPORT_SYMBOL(unregister_binfmt); | |
| static inline void put_binfmt(struct linux_binfmt * fmt) | |
| { | |
| module_put(fmt->module); | |
| } | |
| bool path_noexec(const struct path *path) | |
| { | |
| return (path->mnt->mnt_flags & MNT_NOEXEC) || | |
| (path->mnt->mnt_sb->s_iflags & SB_I_NOEXEC); | |
| } | |
| #ifdef CONFIG_USELIB | |
| /* | |
| * Note that a shared library must be both readable and executable due to | |
| * security reasons. | |
| * | |
| * Also note that we take the address to load from from the file itself. | |
| */ | |
| SYSCALL_DEFINE1(uselib, const char __user *, library) | |
| { | |
| struct linux_binfmt *fmt; | |
| struct file *file; | |
| struct filename *tmp = getname(library); | |
| int error = PTR_ERR(tmp); | |
| static const struct open_flags uselib_flags = { | |
| .open_flag = O_LARGEFILE | O_RDONLY | __FMODE_EXEC, | |
| .acc_mode = MAY_READ | MAY_EXEC, | |
| .intent = LOOKUP_OPEN, | |
| .lookup_flags = LOOKUP_FOLLOW, | |
| }; | |
| if (IS_ERR(tmp)) | |
| goto out; | |
| file = do_filp_open(AT_FDCWD, tmp, &uselib_flags); | |
| putname(tmp); | |
| error = PTR_ERR(file); | |
| if (IS_ERR(file)) | |
| goto out; | |
| error = -EINVAL; | |
| if (!S_ISREG(file_inode(file)->i_mode)) | |
| goto exit; | |
| error = -EACCES; | |
| if (path_noexec(&file->f_path)) | |
| goto exit; | |
| fsnotify_open(file); | |
| error = -ENOEXEC; | |
| read_lock(&binfmt_lock); | |
| list_for_each_entry(fmt, &formats, lh) { | |
| if (!fmt->load_shlib) | |
| continue; | |
| if (!try_module_get(fmt->module)) | |
| continue; | |
| read_unlock(&binfmt_lock); | |
| error = fmt->load_shlib(file); | |
| read_lock(&binfmt_lock); | |
| put_binfmt(fmt); | |
| if (error != -ENOEXEC) | |
| break; | |
| } | |
| read_unlock(&binfmt_lock); | |
| exit: | |
| fput(file); | |
| out: | |
| return error; | |
| } | |
| #endif /* #ifdef CONFIG_USELIB */ | |
| #ifdef CONFIG_MMU | |
| /* | |
| * The nascent bprm->mm is not visible until exec_mmap() but it can | |
| * use a lot of memory, account these pages in current->mm temporary | |
| * for oom_badness()->get_mm_rss(). Once exec succeeds or fails, we | |
| * change the counter back via acct_arg_size(0). | |
| */ | |
| static void acct_arg_size(struct linux_binprm *bprm, unsigned long pages) | |
| { | |
| struct mm_struct *mm = current->mm; | |
| long diff = (long)(pages - bprm->vma_pages); | |
| if (!mm || !diff) | |
| return; | |
| bprm->vma_pages = pages; | |
| add_mm_counter(mm, MM_ANONPAGES, diff); | |
| } | |
| static struct page *get_arg_page(struct linux_binprm *bprm, unsigned long pos, | |
| int write) | |
| { | |
| struct page *page; | |
| int ret; | |
| unsigned int gup_flags = FOLL_FORCE; | |
| #ifdef CONFIG_STACK_GROWSUP | |
| if (write) { | |
| ret = expand_downwards(bprm->vma, pos); | |
| if (ret < 0) | |
| return NULL; | |
| } | |
| #endif | |
| if (write) | |
| gup_flags |= FOLL_WRITE; | |
| /* | |
| * We are doing an exec(). 'current' is the process | |
| * doing the exec and bprm->mm is the new process's mm. | |
| */ | |
| ret = get_user_pages_remote(current, bprm->mm, pos, 1, gup_flags, | |
| &page, NULL, NULL); | |
| if (ret <= 0) | |
| return NULL; | |
| if (write) { | |
| unsigned long size = bprm->vma->vm_end - bprm->vma->vm_start; | |
| unsigned long ptr_size, limit; | |
| /* | |
| * Since the stack will hold pointers to the strings, we | |
| * must account for them as well. | |
| * | |
| * The size calculation is the entire vma while each arg page is | |
| * built, so each time we get here it's calculating how far it | |
| * is currently (rather than each call being just the newly | |
| * added size from the arg page). As a result, we need to | |
| * always add the entire size of the pointers, so that on the | |
| * last call to get_arg_page() we'll actually have the entire | |
| * correct size. | |
| */ | |
| ptr_size = (bprm->argc + bprm->envc) * sizeof(void *); | |
| if (ptr_size > ULONG_MAX - size) | |
| goto fail; | |
| size += ptr_size; | |
| acct_arg_size(bprm, size / PAGE_SIZE); | |
| /* | |
| * We've historically supported up to 32 pages (ARG_MAX) | |
| * of argument strings even with small stacks | |
| */ | |
| if (size <= ARG_MAX) | |
| return page; | |
| /* | |
| * Limit to 1/4 of the max stack size or 3/4 of _STK_LIM | |
| * (whichever is smaller) for the argv+env strings. | |
| * This ensures that: | |
| * - the remaining binfmt code will not run out of stack space, | |
| * - the program will have a reasonable amount of stack left | |
| * to work from. | |
| */ | |
| limit = _STK_LIM / 4 * 3; | |
| limit = min(limit, rlimit(RLIMIT_STACK) / 4); | |
| if (size > limit) | |
| goto fail; | |
| } | |
| return page; | |
| fail: | |
| put_page(page); | |
| return NULL; | |
| } | |
| static void put_arg_page(struct page *page) | |
| { | |
| put_page(page); | |
| } | |
| static void free_arg_pages(struct linux_binprm *bprm) | |
| { | |
| } | |
| static void flush_arg_page(struct linux_binprm *bprm, unsigned long pos, | |
| struct page *page) | |
| { | |
| flush_cache_page(bprm->vma, pos, page_to_pfn(page)); | |
| } | |
| static int __bprm_mm_init(struct linux_binprm *bprm) | |
| { | |
| int err; | |
| struct vm_area_struct *vma = NULL; | |
| struct mm_struct *mm = bprm->mm; | |
| bprm->vma = vma = kmem_cache_zalloc(vm_area_cachep, GFP_KERNEL); | |
| if (!vma) | |
| return -ENOMEM; | |
| if (down_write_killable(&mm->mmap_sem)) { | |
| err = -EINTR; | |
| goto err_free; | |
| } | |
| vma->vm_mm = mm; | |
| /* | |
| * Place the stack at the largest stack address the architecture | |
| * supports. Later, we'll move this to an appropriate place. We don't | |
| * use STACK_TOP because that can depend on attributes which aren't | |
| * configured yet. | |
| */ | |
| BUILD_BUG_ON(VM_STACK_FLAGS & VM_STACK_INCOMPLETE_SETUP); | |
| vma->vm_end = STACK_TOP_MAX; | |
| vma->vm_start = vma->vm_end - PAGE_SIZE; | |
| vma->vm_flags = VM_SOFTDIRTY | VM_STACK_FLAGS | VM_STACK_INCOMPLETE_SETUP; | |
| vma->vm_page_prot = vm_get_page_prot(vma->vm_flags); | |
| INIT_LIST_HEAD(&vma->anon_vma_chain); | |
| err = insert_vm_struct(mm, vma); | |
| if (err) | |
| goto err; | |
| mm->stack_vm = mm->total_vm = 1; | |
| arch_bprm_mm_init(mm, vma); | |
| up_write(&mm->mmap_sem); | |
| bprm->p = vma->vm_end - sizeof(void *); | |
| return 0; | |
| err: | |
| up_write(&mm->mmap_sem); | |
| err_free: | |
| bprm->vma = NULL; | |
| kmem_cache_free(vm_area_cachep, vma); | |
| return err; | |
| } | |
| static bool valid_arg_len(struct linux_binprm *bprm, long len) | |
| { | |
| return len <= MAX_ARG_STRLEN; | |
| } | |
| #else | |
| static inline void acct_arg_size(struct linux_binprm *bprm, unsigned long pages) | |
| { | |
| } | |
| static struct page *get_arg_page(struct linux_binprm *bprm, unsigned long pos, | |
| int write) | |
| { | |
| struct page *page; | |
| page = bprm->page[pos / PAGE_SIZE]; | |
| if (!page && write) { | |
| page = alloc_page(GFP_HIGHUSER|__GFP_ZERO); | |
| if (!page) | |
| return NULL; | |
| bprm->page[pos / PAGE_SIZE] = page; | |
| } | |
| return page; | |
| } | |
| static void put_arg_page(struct page *page) | |
| { | |
| } | |
| static void free_arg_page(struct linux_binprm *bprm, int i) | |
| { | |
| if (bprm->page[i]) { | |
| __free_page(bprm->page[i]); | |
| bprm->page[i] = NULL; | |
| } | |
| } | |
| static void free_arg_pages(struct linux_binprm *bprm) | |
| { | |
| int i; | |
| for (i = 0; i < MAX_ARG_PAGES; i++) | |
| free_arg_page(bprm, i); | |
| } | |
| static void flush_arg_page(struct linux_binprm *bprm, unsigned long pos, | |
| struct page *page) | |
| { | |
| } | |
| static int __bprm_mm_init(struct linux_binprm *bprm) | |
| { | |
| bprm->p = PAGE_SIZE * MAX_ARG_PAGES - sizeof(void *); | |
| return 0; | |
| } | |
| static bool valid_arg_len(struct linux_binprm *bprm, long len) | |
| { | |
| return len <= bprm->p; | |
| } | |
| #endif /* CONFIG_MMU */ | |
| /* | |
| * Create a new mm_struct and populate it with a temporary stack | |
| * vm_area_struct. We don't have enough context at this point to set the stack | |
| * flags, permissions, and offset, so we use temporary values. We'll update | |
| * them later in setup_arg_pages(). | |
| */ | |
| static int bprm_mm_init(struct linux_binprm *bprm) | |
| { | |
| int err; | |
| struct mm_struct *mm = NULL; | |
| bprm->mm = mm = mm_alloc(); | |
| err = -ENOMEM; | |
| if (!mm) | |
| goto err; | |
| err = __bprm_mm_init(bprm); | |
| if (err) | |
| goto err; | |
| return 0; | |
| err: | |
| if (mm) { | |
| bprm->mm = NULL; | |
| mmdrop(mm); | |
| } | |
| return err; | |
| } | |
| struct user_arg_ptr { | |
| #ifdef CONFIG_COMPAT | |
| bool is_compat; | |
| #endif | |
| union { | |
| const char __user *const __user *native; | |
| #ifdef CONFIG_COMPAT | |
| const compat_uptr_t __user *compat; | |
| #endif | |
| } ptr; | |
| }; | |
| static const char __user *get_user_arg_ptr(struct user_arg_ptr argv, int nr) | |
| { | |
| const char __user *native; | |
| #ifdef CONFIG_COMPAT | |
| if (unlikely(argv.is_compat)) { | |
| compat_uptr_t compat; | |
| if (get_user(compat, argv.ptr.compat + nr)) | |
| return ERR_PTR(-EFAULT); | |
| return compat_ptr(compat); | |
| } | |
| #endif | |
| if (get_user(native, argv.ptr.native + nr)) | |
| return ERR_PTR(-EFAULT); | |
| return native; | |
| } | |
| /* | |
| * count() counts the number of strings in array ARGV. | |
| */ | |
| static int count(struct user_arg_ptr argv, int max) | |
| { | |
| int i = 0; | |
| if (argv.ptr.native != NULL) { | |
| for (;;) { | |
| const char __user *p = get_user_arg_ptr(argv, i); | |
| if (!p) | |
| break; | |
| if (IS_ERR(p)) | |
| return -EFAULT; | |
| if (i >= max) | |
| return -E2BIG; | |
| ++i; | |
| if (fatal_signal_pending(current)) | |
| return -ERESTARTNOHAND; | |
| cond_resched(); | |
| } | |
| } | |
| return i; | |
| } | |
| /* | |
| * 'copy_strings()' copies argument/environment strings from the old | |
| * processes's memory to the new process's stack. The call to get_user_pages() | |
| * ensures the destination page is created and not swapped out. | |
| */ | |
| static int copy_strings(int argc, struct user_arg_ptr argv, | |
| struct linux_binprm *bprm) | |
| { | |
| struct page *kmapped_page = NULL; | |
| char *kaddr = NULL; | |
| unsigned long kpos = 0; | |
| int ret; | |
| while (argc-- > 0) { | |
| const char __user *str; | |
| int len; | |
| unsigned long pos; | |
| ret = -EFAULT; | |
| str = get_user_arg_ptr(argv, argc); | |
| if (IS_ERR(str)) | |
| goto out; | |
| len = strnlen_user(str, MAX_ARG_STRLEN); | |
| if (!len) | |
| goto out; | |
| ret = -E2BIG; | |
| if (!valid_arg_len(bprm, len)) | |
| goto out; | |
| /* We're going to work our way backwords. */ | |
| pos = bprm->p; | |
| str += len; | |
| bprm->p -= len; | |
| while (len > 0) { | |
| int offset, bytes_to_copy; | |
| if (fatal_signal_pending(current)) { | |
| ret = -ERESTARTNOHAND; | |
| goto out; | |
| } | |
| cond_resched(); | |
| offset = pos % PAGE_SIZE; | |
| if (offset == 0) | |
| offset = PAGE_SIZE; | |
| bytes_to_copy = offset; | |
| if (bytes_to_copy > len) | |
| bytes_to_copy = len; | |
| offset -= bytes_to_copy; | |
| pos -= bytes_to_copy; | |
| str -= bytes_to_copy; | |
| len -= bytes_to_copy; | |
| if (!kmapped_page || kpos != (pos & PAGE_MASK)) { | |
| struct page *page; | |
| page = get_arg_page(bprm, pos, 1); | |
| if (!page) { | |
| ret = -E2BIG; | |
| goto out; | |
| } | |
| if (kmapped_page) { | |
| flush_kernel_dcache_page(kmapped_page); | |
| kunmap(kmapped_page); | |
| put_arg_page(kmapped_page); | |
| } | |
| kmapped_page = page; | |
| kaddr = kmap(kmapped_page); | |
| kpos = pos & PAGE_MASK; | |
| flush_arg_page(bprm, kpos, kmapped_page); | |
| } | |
| if (copy_from_user(kaddr+offset, str, bytes_to_copy)) { | |
| ret = -EFAULT; | |
| goto out; | |
| } | |
| } | |
| } | |
| ret = 0; | |
| out: | |
| if (kmapped_page) { | |
| flush_kernel_dcache_page(kmapped_page); | |
| kunmap(kmapped_page); | |
| put_arg_page(kmapped_page); | |
| } | |
| return ret; | |
| } | |
| /* | |
| * Like copy_strings, but get argv and its values from kernel memory. | |
| */ | |
| int copy_strings_kernel(int argc, const char *const *__argv, | |
| struct linux_binprm *bprm) | |
| { | |
| int r; | |
| mm_segment_t oldfs = get_fs(); | |
| struct user_arg_ptr argv = { | |
| .ptr.native = (const char __user *const __user *)__argv, | |
| }; | |
| set_fs(KERNEL_DS); | |
| r = copy_strings(argc, argv, bprm); | |
| set_fs(oldfs); | |
| return r; | |
| } | |
| EXPORT_SYMBOL(copy_strings_kernel); | |
| #ifdef CONFIG_MMU | |
| /* | |
| * During bprm_mm_init(), we create a temporary stack at STACK_TOP_MAX. Once | |
| * the binfmt code determines where the new stack should reside, we shift it to | |
| * its final location. The process proceeds as follows: | |
| * | |
| * 1) Use shift to calculate the new vma endpoints. | |
| * 2) Extend vma to cover both the old and new ranges. This ensures the | |
| * arguments passed to subsequent functions are consistent. | |
| * 3) Move vma's page tables to the new range. | |
| * 4) Free up any cleared pgd range. | |
| * 5) Shrink the vma to cover only the new range. | |
| */ | |
| static int shift_arg_pages(struct vm_area_struct *vma, unsigned long shift) | |
| { | |
| struct mm_struct *mm = vma->vm_mm; | |
| unsigned long old_start = vma->vm_start; | |
| unsigned long old_end = vma->vm_end; | |
| unsigned long length = old_end - old_start; | |
| unsigned long new_start = old_start - shift; | |
| unsigned long new_end = old_end - shift; | |
| struct mmu_gather tlb; | |
| BUG_ON(new_start > new_end); | |
| /* | |
| * ensure there are no vmas between where we want to go | |
| * and where we are | |
| */ | |
| if (vma != find_vma(mm, new_start)) | |
| return -EFAULT; | |
| /* | |
| * cover the whole range: [new_start, old_end) | |
| */ | |
| if (vma_adjust(vma, new_start, old_end, vma->vm_pgoff, NULL)) | |
| return -ENOMEM; | |
| /* | |
| * move the page tables downwards, on failure we rely on | |
| * process cleanup to remove whatever mess we made. | |
| */ | |
| if (length != move_page_tables(vma, old_start, | |
| vma, new_start, length, false)) | |
| return -ENOMEM; | |
| lru_add_drain(); | |
| tlb_gather_mmu(&tlb, mm, old_start, old_end); | |
| if (new_end > old_start) { | |
| /* | |
| * when the old and new regions overlap clear from new_end. | |
| */ | |
| free_pgd_range(&tlb, new_end, old_end, new_end, | |
| vma->vm_next ? vma->vm_next->vm_start : USER_PGTABLES_CEILING); | |
| } else { | |
| /* | |
| * otherwise, clean from old_start; this is done to not touch | |
| * the address space in [new_end, old_start) some architectures | |
| * have constraints on va-space that make this illegal (IA64) - | |
| * for the others its just a little faster. | |
| */ | |
| free_pgd_range(&tlb, old_start, old_end, new_end, | |
| vma->vm_next ? vma->vm_next->vm_start : USER_PGTABLES_CEILING); | |
| } | |
| tlb_finish_mmu(&tlb, old_start, old_end); | |
| /* | |
| * Shrink the vma to just the new range. Always succeeds. | |
| */ | |
| vma_adjust(vma, new_start, new_end, vma->vm_pgoff, NULL); | |
| return 0; | |
| } | |
| /* | |
| * Finalizes the stack vm_area_struct. The flags and permissions are updated, | |
| * the stack is optionally relocated, and some extra space is added. | |
| */ | |
| int setup_arg_pages(struct linux_binprm *bprm, | |
| unsigned long stack_top, | |
| int executable_stack) | |
| { | |
| unsigned long ret; | |
| unsigned long stack_shift; | |
| struct mm_struct *mm = current->mm; | |
| struct vm_area_struct *vma = bprm->vma; | |
| struct vm_area_struct *prev = NULL; | |
| unsigned long vm_flags; | |
| unsigned long stack_base; | |
| unsigned long stack_size; | |
| unsigned long stack_expand; | |
| unsigned long rlim_stack; | |
| #ifdef CONFIG_STACK_GROWSUP | |
| /* Limit stack size */ | |
| stack_base = rlimit_max(RLIMIT_STACK); | |
| if (stack_base > STACK_SIZE_MAX) | |
| stack_base = STACK_SIZE_MAX; | |
| /* Add space for stack randomization. */ | |
| stack_base += (STACK_RND_MASK << PAGE_SHIFT); | |
| /* Make sure we didn't let the argument array grow too large. */ | |
| if (vma->vm_end - vma->vm_start > stack_base) | |
| return -ENOMEM; | |
| stack_base = PAGE_ALIGN(stack_top - stack_base); | |
| stack_shift = vma->vm_start - stack_base; | |
| mm->arg_start = bprm->p - stack_shift; | |
| bprm->p = vma->vm_end - stack_shift; | |
| #else | |
| stack_top = arch_align_stack(stack_top); | |
| stack_top = PAGE_ALIGN(stack_top); | |
| if (unlikely(stack_top < mmap_min_addr) || | |
| unlikely(vma->vm_end - vma->vm_start >= stack_top - mmap_min_addr)) | |
| return -ENOMEM; | |
| stack_shift = vma->vm_end - stack_top; | |
| bprm->p -= stack_shift; | |
| mm->arg_start = bprm->p; | |
| #endif | |
| if (bprm->loader) | |
| bprm->loader -= stack_shift; | |
| bprm->exec -= stack_shift; | |
| if (down_write_killable(&mm->mmap_sem)) | |
| return -EINTR; | |
| vm_flags = VM_STACK_FLAGS; | |
| /* | |
| * Adjust stack execute permissions; explicitly enable for | |
| * EXSTACK_ENABLE_X, disable for EXSTACK_DISABLE_X and leave alone | |
| * (arch default) otherwise. | |
| */ | |
| if (unlikely(executable_stack == EXSTACK_ENABLE_X)) | |
| vm_flags |= VM_EXEC; | |
| else if (executable_stack == EXSTACK_DISABLE_X) | |
| vm_flags &= ~VM_EXEC; | |
| vm_flags |= mm->def_flags; | |
| vm_flags |= VM_STACK_INCOMPLETE_SETUP; | |
| ret = mprotect_fixup(vma, &prev, vma->vm_start, vma->vm_end, | |
| vm_flags); | |
| if (ret) | |
| goto out_unlock; | |
| BUG_ON(prev != vma); | |
| /* Move stack pages down in memory. */ | |
| if (stack_shift) { | |
| ret = shift_arg_pages(vma, stack_shift); | |
| if (ret) | |
| goto out_unlock; | |
| } | |
| /* mprotect_fixup is overkill to remove the temporary stack flags */ | |
| vma->vm_flags &= ~VM_STACK_INCOMPLETE_SETUP; | |
| stack_expand = 131072UL; /* randomly 32*4k (or 2*64k) pages */ | |
| stack_size = vma->vm_end - vma->vm_start; | |
| /* | |
| * Align this down to a page boundary as expand_stack | |
| * will align it up. | |
| */ | |
| rlim_stack = rlimit(RLIMIT_STACK) & PAGE_MASK; | |
| #ifdef CONFIG_STACK_GROWSUP | |
| if (stack_size + stack_expand > rlim_stack) | |
| stack_base = vma->vm_start + rlim_stack; | |
| else | |
| stack_base = vma->vm_end + stack_expand; | |
| #else | |
| if (stack_size + stack_expand > rlim_stack) | |
| stack_base = vma->vm_end - rlim_stack; | |
| else | |
| stack_base = vma->vm_start - stack_expand; | |
| #endif | |
| current->mm->start_stack = bprm->p; | |
| ret = expand_stack(vma, stack_base); | |
| if (ret) | |
| ret = -EFAULT; | |
| out_unlock: | |
| up_write(&mm->mmap_sem); | |
| return ret; | |
| } | |
| EXPORT_SYMBOL(setup_arg_pages); | |
| #else | |
| /* | |
| * Transfer the program arguments and environment from the holding pages | |
| * onto the stack. The provided stack pointer is adjusted accordingly. | |
| */ | |
| int transfer_args_to_stack(struct linux_binprm *bprm, | |
| unsigned long *sp_location) | |
| { | |
| unsigned long index, stop, sp; | |
| int ret = 0; | |
| stop = bprm->p >> PAGE_SHIFT; | |
| sp = *sp_location; | |
| for (index = MAX_ARG_PAGES - 1; index >= stop; index--) { | |
| unsigned int offset = index == stop ? bprm->p & ~PAGE_MASK : 0; | |
| char *src = kmap(bprm->page[index]) + offset; | |
| sp -= PAGE_SIZE - offset; | |
| if (copy_to_user((void *) sp, src, PAGE_SIZE - offset) != 0) | |
| ret = -EFAULT; | |
| kunmap(bprm->page[index]); | |
| if (ret) | |
| goto out; | |
| } | |
| *sp_location = sp; | |
| out: | |
| return ret; | |
| } | |
| EXPORT_SYMBOL(transfer_args_to_stack); | |
| #endif /* CONFIG_MMU */ | |
| static struct file *do_open_execat(int fd, struct filename *name, int flags) | |
| { | |
| struct file *file; | |
| int err; | |
| struct open_flags open_exec_flags = { | |
| .open_flag = O_LARGEFILE | O_RDONLY | __FMODE_EXEC, | |
| .acc_mode = MAY_EXEC, | |
| .intent = LOOKUP_OPEN, | |
| .lookup_flags = LOOKUP_FOLLOW, | |
| }; | |
| if ((flags & ~(AT_SYMLINK_NOFOLLOW | AT_EMPTY_PATH)) != 0) | |
| return ERR_PTR(-EINVAL); | |
| if (flags & AT_SYMLINK_NOFOLLOW) | |
| open_exec_flags.lookup_flags &= ~LOOKUP_FOLLOW; | |
| if (flags & AT_EMPTY_PATH) | |
| open_exec_flags.lookup_flags |= LOOKUP_EMPTY; | |
| file = do_filp_open(fd, name, &open_exec_flags); | |
| if (IS_ERR(file)) | |
| goto out; | |
| err = -EACCES; | |
| if (!S_ISREG(file_inode(file)->i_mode)) | |
| goto exit; | |
| if (path_noexec(&file->f_path)) | |
| goto exit; | |
| err = deny_write_access(file); | |
| if (err) | |
| goto exit; | |
| if (name->name[0] != '\0') | |
| fsnotify_open(file); | |
| out: | |
| return file; | |
| exit: | |
| fput(file); | |
| return ERR_PTR(err); | |
| } | |
| struct file *open_exec(const char *name) | |
| { | |
| struct filename *filename = getname_kernel(name); | |
| struct file *f = ERR_CAST(filename); | |
| if (!IS_ERR(filename)) { | |
| f = do_open_execat(AT_FDCWD, filename, 0); | |
| putname(filename); | |
| } | |
| return f; | |
| } | |
| EXPORT_SYMBOL(open_exec); | |
| int kernel_read_file(struct file *file, void **buf, loff_t *size, | |
| loff_t max_size, enum kernel_read_file_id id) | |
| { | |
| loff_t i_size, pos; | |
| ssize_t bytes = 0; | |
| int ret; | |
| if (!S_ISREG(file_inode(file)->i_mode) || max_size < 0) | |
| return -EINVAL; | |
| ret = security_kernel_read_file(file, id); | |
| if (ret) | |
| return ret; | |
| ret = deny_write_access(file); | |
| if (ret) | |
| return ret; | |
| i_size = i_size_read(file_inode(file)); | |
| if (max_size > 0 && i_size > max_size) { | |
| ret = -EFBIG; | |
| goto out; | |
| } | |
| if (i_size <= 0) { | |
| ret = -EINVAL; | |
| goto out; | |
| } | |
| if (id != READING_FIRMWARE_PREALLOC_BUFFER) | |
| *buf = vmalloc(i_size); | |
| if (!*buf) { | |
| ret = -ENOMEM; | |
| goto out; | |
| } | |
| pos = 0; | |
| while (pos < i_size) { | |
| bytes = kernel_read(file, *buf + pos, i_size - pos, &pos); | |
| if (bytes < 0) { | |
| ret = bytes; | |
| goto out; | |
| } | |
| if (bytes == 0) | |
| break; | |
| } | |
| if (pos != i_size) { | |
| ret = -EIO; | |
| goto out_free; | |
| } | |
| ret = security_kernel_post_read_file(file, *buf, i_size, id); | |
| if (!ret) | |
| *size = pos; | |
| out_free: | |
| if (ret < 0) { | |
| if (id != READING_FIRMWARE_PREALLOC_BUFFER) { | |
| vfree(*buf); | |
| *buf = NULL; | |
| } | |
| } | |
| out: | |
| allow_write_access(file); | |
| return ret; | |
| } | |
| EXPORT_SYMBOL_GPL(kernel_read_file); | |
| int kernel_read_file_from_path(const char *path, void **buf, loff_t *size, | |
| loff_t max_size, enum kernel_read_file_id id) | |
| { | |
| struct file *file; | |
| int ret; | |
| if (!path || !*path) | |
| return -EINVAL; | |
| file = filp_open(path, O_RDONLY, 0); | |
| if (IS_ERR(file)) | |
| return PTR_ERR(file); | |
| ret = kernel_read_file(file, buf, size, max_size, id); | |
| fput(file); | |
| return ret; | |
| } | |
| EXPORT_SYMBOL_GPL(kernel_read_file_from_path); | |
| int kernel_read_file_from_fd(int fd, void **buf, loff_t *size, loff_t max_size, | |
| enum kernel_read_file_id id) | |
| { | |
| struct fd f = fdget(fd); | |
| int ret = -EBADF; | |
| if (!f.file) | |
| goto out; | |
| ret = kernel_read_file(f.file, buf, size, max_size, id); | |
| out: | |
| fdput(f); | |
| return ret; | |
| } | |
| EXPORT_SYMBOL_GPL(kernel_read_file_from_fd); | |
| ssize_t read_code(struct file *file, unsigned long addr, loff_t pos, size_t len) | |
| { | |
| ssize_t res = vfs_read(file, (void __user *)addr, len, &pos); | |
| if (res > 0) | |
| flush_icache_range(addr, addr + len); | |
| return res; | |
| } | |
| EXPORT_SYMBOL(read_code); | |
| static int exec_mmap(struct mm_struct *mm) | |
| { | |
| struct task_struct *tsk; | |
| struct mm_struct *old_mm, *active_mm; | |
| /* Notify parent that we're no longer interested in the old VM */ | |
| tsk = current; | |
| old_mm = current->mm; | |
| mm_release(tsk, old_mm); | |
| if (old_mm) { | |
| sync_mm_rss(old_mm); | |
| /* | |
| * Make sure that if there is a core dump in progress | |
| * for the old mm, we get out and die instead of going | |
| * through with the exec. We must hold mmap_sem around | |
| * checking core_state and changing tsk->mm. | |
| */ | |
| down_read(&old_mm->mmap_sem); | |
| if (unlikely(old_mm->core_state)) { | |
| up_read(&old_mm->mmap_sem); | |
| return -EINTR; | |
| } | |
| } | |
| task_lock(tsk); | |
| active_mm = tsk->active_mm; | |
| tsk->mm = mm; | |
| tsk->active_mm = mm; | |
| activate_mm(active_mm, mm); | |
| tsk->mm->vmacache_seqnum = 0; | |
| vmacache_flush(tsk); | |
| task_unlock(tsk); | |
| if (old_mm) { | |
| up_read(&old_mm->mmap_sem); | |
| BUG_ON(active_mm != old_mm); | |
| setmax_mm_hiwater_rss(&tsk->signal->maxrss, old_mm); | |
| mm_update_next_owner(old_mm); | |
| mmput(old_mm); | |
| return 0; | |
| } | |
| mmdrop(active_mm); | |
| return 0; | |
| } | |
| /* | |
| * This function makes sure the current process has its own signal table, | |
| * so that flush_signal_handlers can later reset the handlers without | |
| * disturbing other processes. (Other processes might share the signal | |
| * table via the CLONE_SIGHAND option to clone().) | |
| */ | |
| static int de_thread(struct task_struct *tsk) | |
| { | |
| struct signal_struct *sig = tsk->signal; | |
| struct sighand_struct *oldsighand = tsk->sighand; | |
| spinlock_t *lock = &oldsighand->siglock; | |
| if (thread_group_empty(tsk)) | |
| goto no_thread_group; | |
| /* | |
| * Kill all other threads in the thread group. | |
| */ | |
| spin_lock_irq(lock); | |
| if (signal_group_exit(sig)) { | |
| /* | |
| * Another group action in progress, just | |
| * return so that the signal is processed. | |
| */ | |
| spin_unlock_irq(lock); | |
| return -EAGAIN; | |
| } | |
| sig->group_exit_task = tsk; | |
| sig->notify_count = zap_other_threads(tsk); | |
| if (!thread_group_leader(tsk)) | |
| sig->notify_count--; | |
| while (sig->notify_count) { | |
| __set_current_state(TASK_KILLABLE); | |
| spin_unlock_irq(lock); | |
| schedule(); | |
| if (unlikely(__fatal_signal_pending(tsk))) | |
| goto killed; | |
| spin_lock_irq(lock); | |
| } | |
| spin_unlock_irq(lock); | |
| /* | |
| * At this point all other threads have exited, all we have to | |
| * do is to wait for the thread group leader to become inactive, | |
| * and to assume its PID: | |
| */ | |
| if (!thread_group_leader(tsk)) { | |
| struct task_struct *leader = tsk->group_leader; | |
| for (;;) { | |
| cgroup_threadgroup_change_begin(tsk); | |
| write_lock_irq(&tasklist_lock); | |
| /* | |
| * Do this under tasklist_lock to ensure that | |
| * exit_notify() can't miss ->group_exit_task | |
| */ | |
| sig->notify_count = -1; | |
| if (likely(leader->exit_state)) | |
| break; | |
| __set_current_state(TASK_KILLABLE); | |
| write_unlock_irq(&tasklist_lock); | |
| cgroup_threadgroup_change_end(tsk); | |
| schedule(); | |
| if (unlikely(__fatal_signal_pending(tsk))) | |
| goto killed; | |
| } | |
| /* | |
| * The only record we have of the real-time age of a | |
| * process, regardless of execs it's done, is start_time. | |
| * All the past CPU time is accumulated in signal_struct | |
| * from sister threads now dead. But in this non-leader | |
| * exec, nothing survives from the original leader thread, | |
| * whose birth marks the true age of this process now. | |
| * When we take on its identity by switching to its PID, we | |
| * also take its birthdate (always earlier than our own). | |
| */ | |
| tsk->start_time = leader->start_time; | |
| tsk->real_start_time = leader->real_start_time; | |
| BUG_ON(!same_thread_group(leader, tsk)); | |
| BUG_ON(has_group_leader_pid(tsk)); | |
| /* | |
| * An exec() starts a new thread group with the | |
| * TGID of the previous thread group. Rehash the | |
| * two threads with a switched PID, and release | |
| * the former thread group leader: | |
| */ | |
| /* Become a process group leader with the old leader's pid. | |
| * The old leader becomes a thread of the this thread group. | |
| * Note: The old leader also uses this pid until release_task | |
| * is called. Odd but simple and correct. | |
| */ | |
| tsk->pid = leader->pid; | |
| change_pid(tsk, PIDTYPE_PID, task_pid(leader)); | |
| transfer_pid(leader, tsk, PIDTYPE_PGID); | |
| transfer_pid(leader, tsk, PIDTYPE_SID); | |
| list_replace_rcu(&leader->tasks, &tsk->tasks); | |
| list_replace_init(&leader->sibling, &tsk->sibling); | |
| tsk->group_leader = tsk; | |
| leader->group_leader = tsk; | |
| tsk->exit_signal = SIGCHLD; | |
| leader->exit_signal = -1; | |
| BUG_ON(leader->exit_state != EXIT_ZOMBIE); | |
| leader->exit_state = EXIT_DEAD; | |
| /* | |
| * We are going to release_task()->ptrace_unlink() silently, | |
| * the tracer can sleep in do_wait(). EXIT_DEAD guarantees | |
| * the tracer wont't block again waiting for this thread. | |
| */ | |
| if (unlikely(leader->ptrace)) | |
| __wake_up_parent(leader, leader->parent); | |
| write_unlock_irq(&tasklist_lock); | |
| cgroup_threadgroup_change_end(tsk); | |
| release_task(leader); | |
| } | |
| sig->group_exit_task = NULL; | |
| sig->notify_count = 0; | |
| no_thread_group: | |
| /* we have changed execution domain */ | |
| tsk->exit_signal = SIGCHLD; | |
| #ifdef CONFIG_POSIX_TIMERS | |
| exit_itimers(sig); | |
| flush_itimer_signals(); | |
| #endif | |
| if (atomic_read(&oldsighand->count) != 1) { | |
| struct sighand_struct *newsighand; | |
| /* | |
| * This ->sighand is shared with the CLONE_SIGHAND | |
| * but not CLONE_THREAD task, switch to the new one. | |
| */ | |
| newsighand = kmem_cache_alloc(sighand_cachep, GFP_KERNEL); | |
| if (!newsighand) | |
| return -ENOMEM; | |
| atomic_set(&newsighand->count, 1); | |
| memcpy(newsighand->action, oldsighand->action, | |
| sizeof(newsighand->action)); | |
| write_lock_irq(&tasklist_lock); | |
| spin_lock(&oldsighand->siglock); | |
| rcu_assign_pointer(tsk->sighand, newsighand); | |
| spin_unlock(&oldsighand->siglock); | |
| write_unlock_irq(&tasklist_lock); | |
| __cleanup_sighand(oldsighand); | |
| } | |
| BUG_ON(!thread_group_leader(tsk)); | |
| return 0; | |
| killed: | |
| /* protects against exit_notify() and __exit_signal() */ | |
| read_lock(&tasklist_lock); | |
| sig->group_exit_task = NULL; | |
| sig->notify_count = 0; | |
| read_unlock(&tasklist_lock); | |
| return -EAGAIN; | |
| } | |
| char *get_task_comm(char *buf, struct task_struct *tsk) | |
| { | |
| /* buf must be at least sizeof(tsk->comm) in size */ | |
| task_lock(tsk); | |
| strncpy(buf, tsk->comm, sizeof(tsk->comm)); | |
| task_unlock(tsk); | |
| return buf; | |
| } | |
| EXPORT_SYMBOL_GPL(get_task_comm); | |
| /* | |
| * These functions flushes out all traces of the currently running executable | |
| * so that a new one can be started | |
| */ | |
| void __set_task_comm(struct task_struct *tsk, const char *buf, bool exec) | |
| { | |
| task_lock(tsk); | |
| trace_task_rename(tsk, buf); | |
| strlcpy(tsk->comm, buf, sizeof(tsk->comm)); | |
| task_unlock(tsk); | |
| perf_event_comm(tsk, exec); | |
| } | |
| /* | |
| * Calling this is the point of no return. None of the failures will be | |
| * seen by userspace since either the process is already taking a fatal | |
| * signal (via de_thread() or coredump), or will have SEGV raised | |
| * (after exec_mmap()) by search_binary_handlers (see below). | |
| */ | |
| int flush_old_exec(struct linux_binprm * bprm) | |
| { | |
| int retval; | |
| /* | |
| * Make sure we have a private signal table and that | |
| * we are unassociated from the previous thread group. | |
| */ | |
| retval = de_thread(current); | |
| if (retval) | |
| goto out; | |
| /* | |
| * Must be called _before_ exec_mmap() as bprm->mm is | |
| * not visibile until then. This also enables the update | |
| * to be lockless. | |
| */ | |
| set_mm_exe_file(bprm->mm, bprm->file); | |
| /* | |
| * Release all of the old mmap stuff | |
| */ | |
| acct_arg_size(bprm, 0); | |
| retval = exec_mmap(bprm->mm); | |
| if (retval) | |
| goto out; | |
| /* | |
| * After clearing bprm->mm (to mark that current is using the | |
| * prepared mm now), we have nothing left of the original | |
| * process. If anything from here on returns an error, the check | |
| * in search_binary_handler() will SEGV current. | |
| */ | |
| bprm->mm = NULL; | |
| set_fs(USER_DS); | |
| current->flags &= ~(PF_RANDOMIZE | PF_FORKNOEXEC | PF_KTHREAD | | |
| PF_NOFREEZE | PF_NO_SETAFFINITY); | |
| flush_thread(); | |
| current->personality &= ~bprm->per_clear; | |
| /* | |
| * We have to apply CLOEXEC before we change whether the process is | |
| * dumpable (in setup_new_exec) to avoid a race with a process in userspace | |
| * trying to access the should-be-closed file descriptors of a process | |
| * undergoing exec(2). | |
| */ | |
| do_close_on_exec(current->files); | |
| return 0; | |
| out: | |
| return retval; | |
| } | |
| EXPORT_SYMBOL(flush_old_exec); | |
| void would_dump(struct linux_binprm *bprm, struct file *file) | |
| { | |
| struct inode *inode = file_inode(file); | |
| if (inode_permission(inode, MAY_READ) < 0) { | |
| struct user_namespace *old, *user_ns; | |
| bprm->interp_flags |= BINPRM_FLAGS_ENFORCE_NONDUMP; | |
| /* Ensure mm->user_ns contains the executable */ | |
| user_ns = old = bprm->mm->user_ns; | |
| while ((user_ns != &init_user_ns) && | |
| !privileged_wrt_inode_uidgid(user_ns, inode)) | |
| user_ns = user_ns->parent; | |
| if (old != user_ns) { | |
| bprm->mm->user_ns = get_user_ns(user_ns); | |
| put_user_ns(old); | |
| } | |
| } | |
| } | |
| EXPORT_SYMBOL(would_dump); | |
| void setup_new_exec(struct linux_binprm * bprm) | |
| { | |
| /* | |
| * Once here, prepare_binrpm() will not be called any more, so | |
| * the final state of setuid/setgid/fscaps can be merged into the | |
| * secureexec flag. | |
| */ | |
| bprm->secureexec |= bprm->cap_elevated; | |
| if (bprm->secureexec) { | |
| /* Make sure parent cannot signal privileged process. */ | |
| current->pdeath_signal = 0; | |
| /* | |
| * For secureexec, reset the stack limit to sane default to | |
| * avoid bad behavior from the prior rlimits. This has to | |
| * happen before arch_pick_mmap_layout(), which examines | |
| * RLIMIT_STACK, but after the point of no return to avoid | |
| * needing to clean up the change on failure. | |
| */ | |
| if (current->signal->rlim[RLIMIT_STACK].rlim_cur > _STK_LIM) | |
| current->signal->rlim[RLIMIT_STACK].rlim_cur = _STK_LIM; | |
| } | |
| arch_pick_mmap_layout(current->mm); | |
| current->sas_ss_sp = current->sas_ss_size = 0; | |
| /* Figure out dumpability. */ | |
| if (bprm->interp_flags & BINPRM_FLAGS_ENFORCE_NONDUMP || | |
| bprm->secureexec) | |
| set_dumpable(current->mm, suid_dumpable); | |
| else | |
| set_dumpable(current->mm, SUID_DUMP_USER); | |
| arch_setup_new_exec(); | |
| perf_event_exec(); | |
| __set_task_comm(current, kbasename(bprm->filename), true); | |
| /* Set the new mm task size. We have to do that late because it may | |
| * depend on TIF_32BIT which is only updated in flush_thread() on | |
| * some architectures like powerpc | |
| */ | |
| current->mm->task_size = TASK_SIZE; | |
| /* An exec changes our domain. We are no longer part of the thread | |
| group */ | |
| current->self_exec_id++; | |
| flush_signal_handlers(current, 0); | |
| } | |
| EXPORT_SYMBOL(setup_new_exec); | |
| /* | |
| * Prepare credentials and lock ->cred_guard_mutex. | |
| * install_exec_creds() commits the new creds and drops the lock. | |
| * Or, if exec fails before, free_bprm() should release ->cred and | |
| * and unlock. | |
| */ | |
| int prepare_bprm_creds(struct linux_binprm *bprm) | |
| { | |
| if (mutex_lock_interruptible(¤t->signal->cred_guard_mutex)) | |
| return -ERESTARTNOINTR; | |
| bprm->cred = prepare_exec_creds(); | |
| if (likely(bprm->cred)) | |
| return 0; | |
| mutex_unlock(¤t->signal->cred_guard_mutex); | |
| return -ENOMEM; | |
| } | |
| static void free_bprm(struct linux_binprm *bprm) | |
| { | |
| free_arg_pages(bprm); | |
| if (bprm->cred) { | |
| mutex_unlock(¤t->signal->cred_guard_mutex); | |
| abort_creds(bprm->cred); | |
| } | |
| if (bprm->file) { | |
| allow_write_access(bprm->file); | |
| fput(bprm->file); | |
| } | |
| /* If a binfmt changed the interp, free it. */ | |
| if (bprm->interp != bprm->filename) | |
| kfree(bprm->interp); | |
| kfree(bprm); | |
| } | |
| int bprm_change_interp(const char *interp, struct linux_binprm *bprm) | |
| { | |
| /* If a binfmt changed the interp, free it first. */ | |
| if (bprm->interp != bprm->filename) | |
| kfree(bprm->interp); | |
| bprm->interp = kstrdup(interp, GFP_KERNEL); | |
| if (!bprm->interp) | |
| return -ENOMEM; | |
| return 0; | |
| } | |
| EXPORT_SYMBOL(bprm_change_interp); | |
| /* | |
| * install the new credentials for this executable | |
| */ | |
| void install_exec_creds(struct linux_binprm *bprm) | |
| { | |
| security_bprm_committing_creds(bprm); | |
| commit_creds(bprm->cred); | |
| bprm->cred = NULL; | |
| /* | |
| * Disable monitoring for regular users | |
| * when executing setuid binaries. Must | |
| * wait until new credentials are committed | |
| * by commit_creds() above | |
| */ | |
| if (get_dumpable(current->mm) != SUID_DUMP_USER) | |
| perf_event_exit_task(current); | |
| /* | |
| * cred_guard_mutex must be held at least to this point to prevent | |
| * ptrace_attach() from altering our determination of the task's | |
| * credentials; any time after this it may be unlocked. | |
| */ | |
| security_bprm_committed_creds(bprm); | |
| mutex_unlock(¤t->signal->cred_guard_mutex); | |
| } | |
| EXPORT_SYMBOL(install_exec_creds); | |
| /* | |
| * determine how safe it is to execute the proposed program | |
| * - the caller must hold ->cred_guard_mutex to protect against | |
| * PTRACE_ATTACH or seccomp thread-sync | |
| */ | |
| static void check_unsafe_exec(struct linux_binprm *bprm) | |
| { | |
| struct task_struct *p = current, *t; | |
| unsigned n_fs; | |
| if (p->ptrace) | |
| bprm->unsafe |= LSM_UNSAFE_PTRACE; | |
| /* | |
| * This isn't strictly necessary, but it makes it harder for LSMs to | |
| * mess up. | |
| */ | |
| if (task_no_new_privs(current)) | |
| bprm->unsafe |= LSM_UNSAFE_NO_NEW_PRIVS; | |
| t = p; | |
| n_fs = 1; | |
| spin_lock(&p->fs->lock); | |
| rcu_read_lock(); | |
| while_each_thread(p, t) { | |
| if (t->fs == p->fs) | |
| n_fs++; | |
| } | |
| rcu_read_unlock(); | |
| if (p->fs->users > n_fs) | |
| bprm->unsafe |= LSM_UNSAFE_SHARE; | |
| else | |
| p->fs->in_exec = 1; | |
| spin_unlock(&p->fs->lock); | |
| } | |
| static void bprm_fill_uid(struct linux_binprm *bprm) | |
| { | |
| struct inode *inode; | |
| unsigned int mode; | |
| kuid_t uid; | |
| kgid_t gid; | |
| /* | |
| * Since this can be called multiple times (via prepare_binprm), | |
| * we must clear any previous work done when setting set[ug]id | |
| * bits from any earlier bprm->file uses (for example when run | |
| * first for a setuid script then again for its interpreter). | |
| */ | |
| bprm->cred->euid = current_euid(); | |
| bprm->cred->egid = current_egid(); | |
| if (!mnt_may_suid(bprm->file->f_path.mnt)) | |
| return; | |
| if (task_no_new_privs(current)) | |
| return; | |
| inode = bprm->file->f_path.dentry->d_inode; | |
| mode = READ_ONCE(inode->i_mode); | |
| if (!(mode & (S_ISUID|S_ISGID))) | |
| return; | |
| /* Be careful if suid/sgid is set */ | |
| inode_lock(inode); | |
| /* reload atomically mode/uid/gid now that lock held */ | |
| mode = inode->i_mode; | |
| uid = inode->i_uid; | |
| gid = inode->i_gid; | |
| inode_unlock(inode); | |
| /* We ignore suid/sgid if there are no mappings for them in the ns */ | |
| if (!kuid_has_mapping(bprm->cred->user_ns, uid) || | |
| !kgid_has_mapping(bprm->cred->user_ns, gid)) | |
| return; | |
| if (mode & S_ISUID) { | |
| bprm->per_clear |= PER_CLEAR_ON_SETID; | |
| bprm->cred->euid = uid; | |
| } | |
| if ((mode & (S_ISGID | S_IXGRP)) == (S_ISGID | S_IXGRP)) { | |
| bprm->per_clear |= PER_CLEAR_ON_SETID; | |
| bprm->cred->egid = gid; | |
| } | |
| } | |
| /* | |
| * Fill the binprm structure from the inode. | |
| * Check permissions, then read the first 128 (BINPRM_BUF_SIZE) bytes | |
| * | |
| * This may be called multiple times for binary chains (scripts for example). | |
| */ | |
| int prepare_binprm(struct linux_binprm *bprm) | |
| { | |
| int retval; | |
| loff_t pos = 0; | |
| bprm_fill_uid(bprm); | |
| /* fill in binprm security blob */ | |
| retval = security_bprm_set_creds(bprm); | |
| if (retval) | |
| return retval; | |
| bprm->called_set_creds = 1; | |
| memset(bprm->buf, 0, BINPRM_BUF_SIZE); | |
| return kernel_read(bprm->file, bprm->buf, BINPRM_BUF_SIZE, &pos); | |
| } | |
| EXPORT_SYMBOL(prepare_binprm); | |
| /* | |
| * Arguments are '\0' separated strings found at the location bprm->p | |
| * points to; chop off the first by relocating brpm->p to right after | |
| * the first '\0' encountered. | |
| */ | |
| int remove_arg_zero(struct linux_binprm *bprm) | |
| { | |
| int ret = 0; | |
| unsigned long offset; | |
| char *kaddr; | |
| struct page *page; | |
| if (!bprm->argc) | |
| return 0; | |
| do { | |
| offset = bprm->p & ~PAGE_MASK; | |
| page = get_arg_page(bprm, bprm->p, 0); | |
| if (!page) { | |
| ret = -EFAULT; | |
| goto out; | |
| } | |
| kaddr = kmap_atomic(page); | |
| for (; offset < PAGE_SIZE && kaddr[offset]; | |
| offset++, bprm->p++) | |
| ; | |
| kunmap_atomic(kaddr); | |
| put_arg_page(page); | |
| } while (offset == PAGE_SIZE); | |
| bprm->p++; | |
| bprm->argc--; | |
| ret = 0; | |
| out: | |
| return ret; | |
| } | |
| EXPORT_SYMBOL(remove_arg_zero); | |
| #define printable(c) (((c)=='\t') || ((c)=='\n') || (0x20<=(c) && (c)<=0x7e)) | |
| /* | |
| * cycle the list of binary formats handler, until one recognizes the image | |
| */ | |
| int search_binary_handler(struct linux_binprm *bprm) | |
| { | |
| bool need_retry = IS_ENABLED(CONFIG_MODULES); | |
| struct linux_binfmt *fmt; | |
| int retval; | |
| /* This allows 4 levels of binfmt rewrites before failing hard. */ | |
| if (bprm->recursion_depth > 5) | |
| return -ELOOP; | |
| retval = security_bprm_check(bprm); | |
| if (retval) | |
| return retval; | |
| retval = -ENOENT; | |
| retry: | |
| read_lock(&binfmt_lock); | |
| list_for_each_entry(fmt, &formats, lh) { | |
| if (!try_module_get(fmt->module)) | |
| continue; | |
| read_unlock(&binfmt_lock); | |
| bprm->recursion_depth++; | |
| retval = fmt->load_binary(bprm); | |
| read_lock(&binfmt_lock); | |
| put_binfmt(fmt); | |
| bprm->recursion_depth--; | |
| if (retval < 0 && !bprm->mm) { | |
| /* we got to flush_old_exec() and failed after it */ | |
| read_unlock(&binfmt_lock); | |
| force_sigsegv(SIGSEGV, current); | |
| return retval; | |
| } | |
| if (retval != -ENOEXEC || !bprm->file) { | |
| read_unlock(&binfmt_lock); | |
| return retval; | |
| } | |
| } | |
| read_unlock(&binfmt_lock); | |
| if (need_retry) { | |
| if (printable(bprm->buf[0]) && printable(bprm->buf[1]) && | |
| printable(bprm->buf[2]) && printable(bprm->buf[3])) | |
| return retval; | |
| if (request_module("binfmt-%04x", *(ushort *)(bprm->buf + 2)) < 0) | |
| return retval; | |
| need_retry = false; | |
| goto retry; | |
| } | |
| return retval; | |
| } | |
| EXPORT_SYMBOL(search_binary_handler); | |
| static int exec_binprm(struct linux_binprm *bprm) | |
| { | |
| pid_t old_pid, old_vpid; | |
| int ret; | |
| /* Need to fetch pid before load_binary changes it */ | |
| old_pid = current->pid; | |
| rcu_read_lock(); | |
| old_vpid = task_pid_nr_ns(current, task_active_pid_ns(current->parent)); | |
| rcu_read_unlock(); | |
| ret = search_binary_handler(bprm); | |
| if (ret >= 0) { | |
| audit_bprm(bprm); | |
| trace_sched_process_exec(current, old_pid, bprm); | |
| ptrace_event(PTRACE_EVENT_EXEC, old_vpid); | |
| proc_exec_connector(current); | |
| } | |
| return ret; | |
| } | |
| /* | |
| * sys_execve() executes a new program. | |
| */ | |
| static int do_execveat_common(int fd, struct filename *filename, | |
| struct user_arg_ptr argv, | |
| struct user_arg_ptr envp, | |
| int flags) | |
| { | |
| char *pathbuf = NULL; | |
| struct linux_binprm *bprm; | |
| struct file *file; | |
| struct files_struct *displaced; | |
| int retval; | |
| if (IS_ERR(filename)) | |
| return PTR_ERR(filename); | |
| /* | |
| * We move the actual failure in case of RLIMIT_NPROC excess from | |
| * set*uid() to execve() because too many poorly written programs | |
| * don't check setuid() return code. Here we additionally recheck | |
| * whether NPROC limit is still exceeded. | |
| */ | |
| if ((current->flags & PF_NPROC_EXCEEDED) && | |
| atomic_read(¤t_user()->processes) > rlimit(RLIMIT_NPROC)) { | |
| retval = -EAGAIN; | |
| goto out_ret; | |
| } | |
| /* We're below the limit (still or again), so we don't want to make | |
| * further execve() calls fail. */ | |
| current->flags &= ~PF_NPROC_EXCEEDED; | |
| retval = unshare_files(&displaced); | |
| if (retval) | |
| goto out_ret; | |
| retval = -ENOMEM; | |
| bprm = kzalloc(sizeof(*bprm), GFP_KERNEL); | |
| if (!bprm) | |
| goto out_files; | |
| retval = prepare_bprm_creds(bprm); | |
| if (retval) | |
| goto out_free; | |
| check_unsafe_exec(bprm); | |
| current->in_execve = 1; | |
| file = do_open_execat(fd, filename, flags); | |
| retval = PTR_ERR(file); | |
| if (IS_ERR(file)) | |
| goto out_unmark; | |
| sched_exec(); | |
| bprm->file = file; | |
| if (fd == AT_FDCWD || filename->name[0] == '/') { | |
| bprm->filename = filename->name; | |
| } else { | |
| if (filename->name[0] == '\0') | |
| pathbuf = kasprintf(GFP_KERNEL, "/dev/fd/%d", fd); | |
| else | |
| pathbuf = kasprintf(GFP_KERNEL, "/dev/fd/%d/%s", | |
| fd, filename->name); | |
| if (!pathbuf) { | |
| retval = -ENOMEM; | |
| goto out_unmark; | |
| } | |
| /* | |
| * Record that a name derived from an O_CLOEXEC fd will be | |
| * inaccessible after exec. Relies on having exclusive access to | |
| * current->files (due to unshare_files above). | |
| */ | |
| if (close_on_exec(fd, rcu_dereference_raw(current->files->fdt))) | |
| bprm->interp_flags |= BINPRM_FLAGS_PATH_INACCESSIBLE; | |
| bprm->filename = pathbuf; | |
| } | |
| bprm->interp = bprm->filename; | |
| retval = bprm_mm_init(bprm); | |
| if (retval) | |
| goto out_unmark; | |
| bprm->argc = count(argv, MAX_ARG_STRINGS); | |
| if ((retval = bprm->argc) < 0) | |
| goto out; | |
| bprm->envc = count(envp, MAX_ARG_STRINGS); | |
| if ((retval = bprm->envc) < 0) | |
| goto out; | |
| retval = prepare_binprm(bprm); | |
| if (retval < 0) | |
| goto out; | |
| retval = copy_strings_kernel(1, &bprm->filename, bprm); | |
| if (retval < 0) | |
| goto out; | |
| bprm->exec = bprm->p; | |
| retval = copy_strings(bprm->envc, envp, bprm); | |
| if (retval < 0) | |
| goto out; | |
| retval = copy_strings(bprm->argc, argv, bprm); | |
| if (retval < 0) | |
| goto out; | |
| would_dump(bprm, bprm->file); | |
| retval = exec_binprm(bprm); | |
| if (retval < 0) | |
| goto out; | |
| /* execve succeeded */ | |
| current->fs->in_exec = 0; | |
| current->in_execve = 0; | |
| acct_update_integrals(current); | |
| task_numa_free(current); | |
| free_bprm(bprm); | |
| kfree(pathbuf); | |
| putname(filename); | |
| if (displaced) | |
| put_files_struct(displaced); | |
| return retval; | |
| out: | |
| if (bprm->mm) { | |
| acct_arg_size(bprm, 0); | |
| mmput(bprm->mm); | |
| } | |
| out_unmark: | |
| current->fs->in_exec = 0; | |
| current->in_execve = 0; | |
| out_free: | |
| free_bprm(bprm); | |
| kfree(pathbuf); | |
| out_files: | |
| if (displaced) | |
| reset_files_struct(displaced); | |
| out_ret: | |
| putname(filename); | |
| return retval; | |
| } | |
| int do_execve(struct filename *filename, | |
| const char __user *const __user *__argv, | |
| const char __user *const __user *__envp) | |
| { | |
| struct user_arg_ptr argv = { .ptr.native = __argv }; | |
| struct user_arg_ptr envp = { .ptr.native = __envp }; | |
| return do_execveat_common(AT_FDCWD, filename, argv, envp, 0); | |
| } | |
| int do_execveat(int fd, struct filename *filename, | |
| const char __user *const __user *__argv, | |
| const char __user *const __user *__envp, | |
| int flags) | |
| { | |
| struct user_arg_ptr argv = { .ptr.native = __argv }; | |
| struct user_arg_ptr envp = { .ptr.native = __envp }; | |
| return do_execveat_common(fd, filename, argv, envp, flags); | |
| } | |
| #ifdef CONFIG_COMPAT | |
| static int compat_do_execve(struct filename *filename, | |
| const compat_uptr_t __user *__argv, | |
| const compat_uptr_t __user *__envp) | |
| { | |
| struct user_arg_ptr argv = { | |
| .is_compat = true, | |
| .ptr.compat = __argv, | |
| }; | |
| struct user_arg_ptr envp = { | |
| .is_compat = true, | |
| .ptr.compat = __envp, | |
| }; | |
| return do_execveat_common(AT_FDCWD, filename, argv, envp, 0); | |
| } | |
| static int compat_do_execveat(int fd, struct filename *filename, | |
| const compat_uptr_t __user *__argv, | |
| const compat_uptr_t __user *__envp, | |
| int flags) | |
| { | |
| struct user_arg_ptr argv = { | |
| .is_compat = true, | |
| .ptr.compat = __argv, | |
| }; | |
| struct user_arg_ptr envp = { | |
| .is_compat = true, | |
| .ptr.compat = __envp, | |
| }; | |
| return do_execveat_common(fd, filename, argv, envp, flags); | |
| } | |
| #endif | |
| void set_binfmt(struct linux_binfmt *new) | |
| { | |
| struct mm_struct *mm = current->mm; | |
| if (mm->binfmt) | |
| module_put(mm->binfmt->module); | |
| mm->binfmt = new; | |
| if (new) | |
| __module_get(new->module); | |
| } | |
| EXPORT_SYMBOL(set_binfmt); | |
| /* | |
| * set_dumpable stores three-value SUID_DUMP_* into mm->flags. | |
| */ | |
| void set_dumpable(struct mm_struct *mm, int value) | |
| { | |
| unsigned long old, new; | |
| if (WARN_ON((unsigned)value > SUID_DUMP_ROOT)) | |
| return; | |
| do { | |
| old = READ_ONCE(mm->flags); | |
| new = (old & ~MMF_DUMPABLE_MASK) | value; | |
| } while (cmpxchg(&mm->flags, old, new) != old); | |
| } | |
| SYSCALL_DEFINE3(execve, | |
| const char __user *, filename, | |
| const char __user *const __user *, argv, | |
| const char __user *const __user *, envp) | |
| { | |
| return do_execve(getname(filename), argv, envp); | |
| } | |
| SYSCALL_DEFINE5(execveat, | |
| int, fd, const char __user *, filename, | |
| const char __user *const __user *, argv, | |
| const char __user *const __user *, envp, | |
| int, flags) | |
| { | |
| int lookup_flags = (flags & AT_EMPTY_PATH) ? LOOKUP_EMPTY : 0; | |
| return do_execveat(fd, | |
| getname_flags(filename, lookup_flags, NULL), | |
| argv, envp, flags); | |
| } | |
| #ifdef CONFIG_COMPAT | |
| COMPAT_SYSCALL_DEFINE3(execve, const char __user *, filename, | |
| const compat_uptr_t __user *, argv, | |
| const compat_uptr_t __user *, envp) | |
| { | |
| return compat_do_execve(getname(filename), argv, envp); | |
| } | |
| COMPAT_SYSCALL_DEFINE5(execveat, int, fd, | |
| const char __user *, filename, | |
| const compat_uptr_t __user *, argv, | |
| const compat_uptr_t __user *, envp, | |
| int, flags) | |
| { | |
| int lookup_flags = (flags & AT_EMPTY_PATH) ? LOOKUP_EMPTY : 0; | |
| return compat_do_execveat(fd, | |
| getname_flags(filename, lookup_flags, NULL), | |
| argv, envp, flags); | |
| } | |
| #endif |