| // SPDX-License-Identifier: GPL-2.0-or-later |
| /* |
| * Alienware WMAX WMI device driver |
| * |
| * Copyright (C) 2014 Dell Inc <Dell.Client.Kernel@dell.com> |
| * Copyright (C) 2025 Kurt Borja <kuurtb@gmail.com> |
| */ |
| |
| #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt |
| |
| #include <linux/array_size.h> |
| #include <linux/bitfield.h> |
| #include <linux/bitmap.h> |
| #include <linux/bits.h> |
| #include <linux/debugfs.h> |
| #include <linux/dmi.h> |
| #include <linux/hwmon.h> |
| #include <linux/hwmon-sysfs.h> |
| #include <linux/kstrtox.h> |
| #include <linux/minmax.h> |
| #include <linux/moduleparam.h> |
| #include <linux/platform_profile.h> |
| #include <linux/pm.h> |
| #include <linux/seq_file.h> |
| #include <linux/units.h> |
| #include <linux/wmi.h> |
| #include "alienware-wmi.h" |
| |
| #define WMAX_METHOD_HDMI_SOURCE 0x1 |
| #define WMAX_METHOD_HDMI_STATUS 0x2 |
| #define WMAX_METHOD_HDMI_CABLE 0x5 |
| #define WMAX_METHOD_AMPLIFIER_CABLE 0x6 |
| #define WMAX_METHOD_DEEP_SLEEP_CONTROL 0x0B |
| #define WMAX_METHOD_DEEP_SLEEP_STATUS 0x0C |
| #define WMAX_METHOD_BRIGHTNESS 0x3 |
| #define WMAX_METHOD_ZONE_CONTROL 0x4 |
| |
| #define AWCC_METHOD_GET_FAN_SENSORS 0x13 |
| #define AWCC_METHOD_THERMAL_INFORMATION 0x14 |
| #define AWCC_METHOD_THERMAL_CONTROL 0x15 |
| #define AWCC_METHOD_FWUP_GPIO_CONTROL 0x20 |
| #define AWCC_METHOD_READ_TOTAL_GPIOS 0x21 |
| #define AWCC_METHOD_READ_GPIO_STATUS 0x22 |
| #define AWCC_METHOD_GAME_SHIFT_STATUS 0x25 |
| |
| #define AWCC_FAILURE_CODE 0xFFFFFFFF |
| #define AWCC_FAILURE_CODE_2 0xFFFFFFFE |
| |
| #define AWCC_SENSOR_ID_FLAG BIT(8) |
| #define AWCC_THERMAL_MODE_MASK GENMASK(3, 0) |
| #define AWCC_THERMAL_TABLE_MASK GENMASK(7, 4) |
| #define AWCC_RESOURCE_ID_MASK GENMASK(7, 0) |
| |
| /* Arbitrary limit based on supported models */ |
| #define AWCC_MAX_RES_COUNT 16 |
| #define AWCC_ID_BITMAP_SIZE (U8_MAX + 1) |
| #define AWCC_ID_BITMAP_LONGS BITS_TO_LONGS(AWCC_ID_BITMAP_SIZE) |
| |
| static bool force_hwmon; |
| module_param_unsafe(force_hwmon, bool, 0); |
| MODULE_PARM_DESC(force_hwmon, "Force probing for HWMON support without checking if the WMI backend is available"); |
| |
| static bool force_platform_profile; |
| module_param_unsafe(force_platform_profile, bool, 0); |
| MODULE_PARM_DESC(force_platform_profile, "Forces auto-detecting thermal profiles without checking if WMI thermal backend is available"); |
| |
| static bool force_gmode; |
| module_param_unsafe(force_gmode, bool, 0); |
| MODULE_PARM_DESC(force_gmode, "Forces G-Mode when performance profile is selected"); |
| |
| struct awcc_quirks { |
| bool hwmon; |
| bool pprof; |
| bool gmode; |
| }; |
| |
| static struct awcc_quirks g_series_quirks = { |
| .hwmon = true, |
| .pprof = true, |
| .gmode = true, |
| }; |
| |
| static struct awcc_quirks generic_quirks = { |
| .hwmon = true, |
| .pprof = true, |
| .gmode = false, |
| }; |
| |
| static struct awcc_quirks empty_quirks; |
| |
| static const struct dmi_system_id awcc_dmi_table[] __initconst = { |
| { |
| .ident = "Alienware Area-51m", |
| .matches = { |
| DMI_MATCH(DMI_SYS_VENDOR, "Alienware"), |
| DMI_MATCH(DMI_PRODUCT_NAME, "Alienware Area-51m"), |
| }, |
| .driver_data = &generic_quirks, |
| }, |
| { |
| .ident = "Alienware Area-51m R2", |
| .matches = { |
| DMI_MATCH(DMI_SYS_VENDOR, "Alienware"), |
| DMI_MATCH(DMI_PRODUCT_NAME, "Alienware Area-51m R2"), |
| }, |
| .driver_data = &generic_quirks, |
| }, |
| { |
| .ident = "Alienware m15 R5", |
| .matches = { |
| DMI_MATCH(DMI_SYS_VENDOR, "Alienware"), |
| DMI_MATCH(DMI_PRODUCT_NAME, "Alienware m15 R5"), |
| }, |
| .driver_data = &generic_quirks, |
| }, |
| { |
| .ident = "Alienware m15 R7", |
| .matches = { |
| DMI_MATCH(DMI_SYS_VENDOR, "Alienware"), |
| DMI_MATCH(DMI_PRODUCT_NAME, "Alienware m15 R7"), |
| }, |
| .driver_data = &generic_quirks, |
| }, |
| { |
| .ident = "Alienware m16 R1", |
| .matches = { |
| DMI_MATCH(DMI_SYS_VENDOR, "Alienware"), |
| DMI_MATCH(DMI_PRODUCT_NAME, "Alienware m16 R1"), |
| }, |
| .driver_data = &g_series_quirks, |
| }, |
| { |
| .ident = "Alienware m16 R1 AMD", |
| .matches = { |
| DMI_MATCH(DMI_SYS_VENDOR, "Alienware"), |
| DMI_MATCH(DMI_PRODUCT_NAME, "Alienware m16 R1 AMD"), |
| }, |
| .driver_data = &generic_quirks, |
| }, |
| { |
| .ident = "Alienware m16 R2", |
| .matches = { |
| DMI_MATCH(DMI_SYS_VENDOR, "Alienware"), |
| DMI_MATCH(DMI_PRODUCT_NAME, "Alienware m16 R2"), |
| }, |
| .driver_data = &generic_quirks, |
| }, |
| { |
| .ident = "Alienware m17 R5", |
| .matches = { |
| DMI_MATCH(DMI_SYS_VENDOR, "Alienware"), |
| DMI_MATCH(DMI_PRODUCT_NAME, "Alienware m17 R5 AMD"), |
| }, |
| .driver_data = &generic_quirks, |
| }, |
| { |
| .ident = "Alienware m18 R2", |
| .matches = { |
| DMI_MATCH(DMI_SYS_VENDOR, "Alienware"), |
| DMI_MATCH(DMI_PRODUCT_NAME, "Alienware m18 R2"), |
| }, |
| .driver_data = &generic_quirks, |
| }, |
| { |
| .ident = "Alienware x15 R1", |
| .matches = { |
| DMI_MATCH(DMI_SYS_VENDOR, "Alienware"), |
| DMI_MATCH(DMI_PRODUCT_NAME, "Alienware x15 R1"), |
| }, |
| .driver_data = &generic_quirks, |
| }, |
| { |
| .ident = "Alienware x15 R2", |
| .matches = { |
| DMI_MATCH(DMI_SYS_VENDOR, "Alienware"), |
| DMI_MATCH(DMI_PRODUCT_NAME, "Alienware x15 R2"), |
| }, |
| .driver_data = &generic_quirks, |
| }, |
| { |
| .ident = "Alienware x17 R2", |
| .matches = { |
| DMI_MATCH(DMI_SYS_VENDOR, "Alienware"), |
| DMI_MATCH(DMI_PRODUCT_NAME, "Alienware x17 R2"), |
| }, |
| .driver_data = &generic_quirks, |
| }, |
| { |
| .ident = "Dell Inc. G15 5510", |
| .matches = { |
| DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), |
| DMI_MATCH(DMI_PRODUCT_NAME, "Dell G15 5510"), |
| }, |
| .driver_data = &g_series_quirks, |
| }, |
| { |
| .ident = "Dell Inc. G15 5511", |
| .matches = { |
| DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), |
| DMI_MATCH(DMI_PRODUCT_NAME, "Dell G15 5511"), |
| }, |
| .driver_data = &g_series_quirks, |
| }, |
| { |
| .ident = "Dell Inc. G15 5515", |
| .matches = { |
| DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), |
| DMI_MATCH(DMI_PRODUCT_NAME, "Dell G15 5515"), |
| }, |
| .driver_data = &g_series_quirks, |
| }, |
| { |
| .ident = "Dell Inc. G15 5530", |
| .matches = { |
| DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), |
| DMI_MATCH(DMI_PRODUCT_NAME, "Dell G15 5530"), |
| }, |
| .driver_data = &g_series_quirks, |
| }, |
| { |
| .ident = "Dell Inc. G16 7630", |
| .matches = { |
| DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), |
| DMI_MATCH(DMI_PRODUCT_NAME, "Dell G16 7630"), |
| }, |
| .driver_data = &g_series_quirks, |
| }, |
| { |
| .ident = "Dell Inc. G3 3500", |
| .matches = { |
| DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), |
| DMI_MATCH(DMI_PRODUCT_NAME, "G3 3500"), |
| }, |
| .driver_data = &g_series_quirks, |
| }, |
| { |
| .ident = "Dell Inc. G3 3590", |
| .matches = { |
| DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), |
| DMI_MATCH(DMI_PRODUCT_NAME, "G3 3590"), |
| }, |
| .driver_data = &g_series_quirks, |
| }, |
| { |
| .ident = "Dell Inc. G5 5500", |
| .matches = { |
| DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), |
| DMI_MATCH(DMI_PRODUCT_NAME, "G5 5500"), |
| }, |
| .driver_data = &g_series_quirks, |
| }, |
| { |
| .ident = "Dell Inc. G5 5505", |
| .matches = { |
| DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), |
| DMI_MATCH(DMI_PRODUCT_NAME, "G5 5505"), |
| }, |
| .driver_data = &g_series_quirks, |
| }, |
| {} |
| }; |
| |
| enum AWCC_GET_FAN_SENSORS_OPERATIONS { |
| AWCC_OP_GET_TOTAL_FAN_TEMPS = 0x01, |
| AWCC_OP_GET_FAN_TEMP_ID = 0x02, |
| }; |
| |
| enum AWCC_THERMAL_INFORMATION_OPERATIONS { |
| AWCC_OP_GET_SYSTEM_DESCRIPTION = 0x02, |
| AWCC_OP_GET_RESOURCE_ID = 0x03, |
| AWCC_OP_GET_TEMPERATURE = 0x04, |
| AWCC_OP_GET_FAN_RPM = 0x05, |
| AWCC_OP_GET_FAN_MIN_RPM = 0x08, |
| AWCC_OP_GET_FAN_MAX_RPM = 0x09, |
| AWCC_OP_GET_CURRENT_PROFILE = 0x0B, |
| AWCC_OP_GET_FAN_BOOST = 0x0C, |
| }; |
| |
| enum AWCC_THERMAL_CONTROL_OPERATIONS { |
| AWCC_OP_ACTIVATE_PROFILE = 0x01, |
| AWCC_OP_SET_FAN_BOOST = 0x02, |
| }; |
| |
| enum AWCC_GAME_SHIFT_STATUS_OPERATIONS { |
| AWCC_OP_TOGGLE_GAME_SHIFT = 0x01, |
| AWCC_OP_GET_GAME_SHIFT_STATUS = 0x02, |
| }; |
| |
| enum AWCC_THERMAL_TABLES { |
| AWCC_THERMAL_TABLE_LEGACY = 0x9, |
| AWCC_THERMAL_TABLE_USTT = 0xA, |
| }; |
| |
| enum AWCC_SPECIAL_THERMAL_CODES { |
| AWCC_SPECIAL_PROFILE_CUSTOM = 0x00, |
| AWCC_SPECIAL_PROFILE_GMODE = 0xAB, |
| }; |
| |
| enum AWCC_TEMP_SENSOR_TYPES { |
| AWCC_TEMP_SENSOR_CPU = 0x01, |
| AWCC_TEMP_SENSOR_FRONT = 0x03, |
| AWCC_TEMP_SENSOR_GPU = 0x06, |
| }; |
| |
| enum AWCC_FAN_TYPES { |
| AWCC_FAN_CPU_1 = 0x32, |
| AWCC_FAN_GPU_1 = 0x33, |
| AWCC_FAN_PCI = 0x34, |
| AWCC_FAN_MID = 0x35, |
| AWCC_FAN_TOP_1 = 0x36, |
| AWCC_FAN_SIDE = 0x37, |
| AWCC_FAN_U2_1 = 0x38, |
| AWCC_FAN_U2_2 = 0x39, |
| AWCC_FAN_FRONT_1 = 0x3A, |
| AWCC_FAN_CPU_2 = 0x3B, |
| AWCC_FAN_GPU_2 = 0x3C, |
| AWCC_FAN_TOP_2 = 0x3D, |
| AWCC_FAN_TOP_3 = 0x3E, |
| AWCC_FAN_FRONT_2 = 0x3F, |
| AWCC_FAN_BOTTOM_1 = 0x40, |
| AWCC_FAN_BOTTOM_2 = 0x41, |
| }; |
| |
| enum awcc_thermal_profile { |
| AWCC_PROFILE_USTT_BALANCED, |
| AWCC_PROFILE_USTT_BALANCED_PERFORMANCE, |
| AWCC_PROFILE_USTT_COOL, |
| AWCC_PROFILE_USTT_QUIET, |
| AWCC_PROFILE_USTT_PERFORMANCE, |
| AWCC_PROFILE_USTT_LOW_POWER, |
| AWCC_PROFILE_LEGACY_QUIET, |
| AWCC_PROFILE_LEGACY_BALANCED, |
| AWCC_PROFILE_LEGACY_BALANCED_PERFORMANCE, |
| AWCC_PROFILE_LEGACY_PERFORMANCE, |
| AWCC_PROFILE_LAST, |
| }; |
| |
| struct wmax_led_args { |
| u32 led_mask; |
| struct color_platform colors; |
| u8 state; |
| } __packed; |
| |
| struct wmax_brightness_args { |
| u32 led_mask; |
| u32 percentage; |
| }; |
| |
| struct wmax_basic_args { |
| u8 arg; |
| }; |
| |
| struct wmax_u32_args { |
| u8 operation; |
| u8 arg1; |
| u8 arg2; |
| u8 arg3; |
| }; |
| |
| struct awcc_fan_data { |
| unsigned long auto_channels_temp; |
| u32 min_rpm; |
| u32 max_rpm; |
| u8 suspend_cache; |
| u8 id; |
| }; |
| |
| struct awcc_priv { |
| struct wmi_device *wdev; |
| union { |
| u32 system_description; |
| struct { |
| u8 fan_count; |
| u8 temp_count; |
| u8 unknown_count; |
| u8 profile_count; |
| }; |
| u8 res_count[4]; |
| }; |
| |
| struct device *ppdev; |
| u8 supported_profiles[PLATFORM_PROFILE_LAST]; |
| |
| struct device *hwdev; |
| struct awcc_fan_data **fan_data; |
| unsigned long temp_sensors[AWCC_ID_BITMAP_LONGS]; |
| |
| u32 gpio_count; |
| }; |
| |
| static const enum platform_profile_option awcc_mode_to_platform_profile[AWCC_PROFILE_LAST] = { |
| [AWCC_PROFILE_USTT_BALANCED] = PLATFORM_PROFILE_BALANCED, |
| [AWCC_PROFILE_USTT_BALANCED_PERFORMANCE] = PLATFORM_PROFILE_BALANCED_PERFORMANCE, |
| [AWCC_PROFILE_USTT_COOL] = PLATFORM_PROFILE_COOL, |
| [AWCC_PROFILE_USTT_QUIET] = PLATFORM_PROFILE_QUIET, |
| [AWCC_PROFILE_USTT_PERFORMANCE] = PLATFORM_PROFILE_PERFORMANCE, |
| [AWCC_PROFILE_USTT_LOW_POWER] = PLATFORM_PROFILE_LOW_POWER, |
| [AWCC_PROFILE_LEGACY_QUIET] = PLATFORM_PROFILE_QUIET, |
| [AWCC_PROFILE_LEGACY_BALANCED] = PLATFORM_PROFILE_BALANCED, |
| [AWCC_PROFILE_LEGACY_BALANCED_PERFORMANCE] = PLATFORM_PROFILE_BALANCED_PERFORMANCE, |
| [AWCC_PROFILE_LEGACY_PERFORMANCE] = PLATFORM_PROFILE_PERFORMANCE, |
| }; |
| |
| static struct awcc_quirks *awcc; |
| |
| /* |
| * The HDMI mux sysfs node indicates the status of the HDMI input mux. |
| * It can toggle between standard system GPU output and HDMI input. |
| */ |
| static ssize_t cable_show(struct device *dev, struct device_attribute *attr, |
| char *buf) |
| { |
| struct alienfx_platdata *pdata = dev_get_platdata(dev); |
| struct wmax_basic_args in_args = { |
| .arg = 0, |
| }; |
| u32 out_data; |
| int ret; |
| |
| ret = alienware_wmi_command(pdata->wdev, WMAX_METHOD_HDMI_CABLE, |
| &in_args, sizeof(in_args), &out_data); |
| if (!ret) { |
| if (out_data == 0) |
| return sysfs_emit(buf, "[unconnected] connected unknown\n"); |
| else if (out_data == 1) |
| return sysfs_emit(buf, "unconnected [connected] unknown\n"); |
| } |
| |
| pr_err("alienware-wmi: unknown HDMI cable status: %d\n", ret); |
| return sysfs_emit(buf, "unconnected connected [unknown]\n"); |
| } |
| |
| static ssize_t source_show(struct device *dev, struct device_attribute *attr, |
| char *buf) |
| { |
| struct alienfx_platdata *pdata = dev_get_platdata(dev); |
| struct wmax_basic_args in_args = { |
| .arg = 0, |
| }; |
| u32 out_data; |
| int ret; |
| |
| ret = alienware_wmi_command(pdata->wdev, WMAX_METHOD_HDMI_STATUS, |
| &in_args, sizeof(in_args), &out_data); |
| if (!ret) { |
| if (out_data == 1) |
| return sysfs_emit(buf, "[input] gpu unknown\n"); |
| else if (out_data == 2) |
| return sysfs_emit(buf, "input [gpu] unknown\n"); |
| } |
| |
| pr_err("alienware-wmi: unknown HDMI source status: %u\n", ret); |
| return sysfs_emit(buf, "input gpu [unknown]\n"); |
| } |
| |
| static ssize_t source_store(struct device *dev, struct device_attribute *attr, |
| const char *buf, size_t count) |
| { |
| struct alienfx_platdata *pdata = dev_get_platdata(dev); |
| struct wmax_basic_args args; |
| int ret; |
| |
| if (strcmp(buf, "gpu\n") == 0) |
| args.arg = 1; |
| else if (strcmp(buf, "input\n") == 0) |
| args.arg = 2; |
| else |
| args.arg = 3; |
| pr_debug("alienware-wmi: setting hdmi to %d : %s", args.arg, buf); |
| |
| ret = alienware_wmi_command(pdata->wdev, WMAX_METHOD_HDMI_SOURCE, &args, |
| sizeof(args), NULL); |
| if (ret < 0) |
| pr_err("alienware-wmi: HDMI toggle failed: results: %u\n", ret); |
| |
| return count; |
| } |
| |
| static DEVICE_ATTR_RO(cable); |
| static DEVICE_ATTR_RW(source); |
| |
| static bool hdmi_group_visible(struct kobject *kobj) |
| { |
| return alienware_interface == WMAX && alienfx->hdmi_mux; |
| } |
| DEFINE_SIMPLE_SYSFS_GROUP_VISIBLE(hdmi); |
| |
| static struct attribute *hdmi_attrs[] = { |
| &dev_attr_cable.attr, |
| &dev_attr_source.attr, |
| NULL, |
| }; |
| |
| const struct attribute_group wmax_hdmi_attribute_group = { |
| .name = "hdmi", |
| .is_visible = SYSFS_GROUP_VISIBLE(hdmi), |
| .attrs = hdmi_attrs, |
| }; |
| |
| /* |
| * Alienware GFX amplifier support |
| * - Currently supports reading cable status |
| * - Leaving expansion room to possibly support dock/undock events later |
| */ |
| static ssize_t status_show(struct device *dev, struct device_attribute *attr, |
| char *buf) |
| { |
| struct alienfx_platdata *pdata = dev_get_platdata(dev); |
| struct wmax_basic_args in_args = { |
| .arg = 0, |
| }; |
| u32 out_data; |
| int ret; |
| |
| ret = alienware_wmi_command(pdata->wdev, WMAX_METHOD_AMPLIFIER_CABLE, |
| &in_args, sizeof(in_args), &out_data); |
| if (!ret) { |
| if (out_data == 0) |
| return sysfs_emit(buf, "[unconnected] connected unknown\n"); |
| else if (out_data == 1) |
| return sysfs_emit(buf, "unconnected [connected] unknown\n"); |
| } |
| |
| pr_err("alienware-wmi: unknown amplifier cable status: %d\n", ret); |
| return sysfs_emit(buf, "unconnected connected [unknown]\n"); |
| } |
| |
| static DEVICE_ATTR_RO(status); |
| |
| static bool amplifier_group_visible(struct kobject *kobj) |
| { |
| return alienware_interface == WMAX && alienfx->amplifier; |
| } |
| DEFINE_SIMPLE_SYSFS_GROUP_VISIBLE(amplifier); |
| |
| static struct attribute *amplifier_attrs[] = { |
| &dev_attr_status.attr, |
| NULL, |
| }; |
| |
| const struct attribute_group wmax_amplifier_attribute_group = { |
| .name = "amplifier", |
| .is_visible = SYSFS_GROUP_VISIBLE(amplifier), |
| .attrs = amplifier_attrs, |
| }; |
| |
| /* |
| * Deep Sleep Control support |
| * - Modifies BIOS setting for deep sleep control allowing extra wakeup events |
| */ |
| static ssize_t deepsleep_show(struct device *dev, struct device_attribute *attr, |
| char *buf) |
| { |
| struct alienfx_platdata *pdata = dev_get_platdata(dev); |
| struct wmax_basic_args in_args = { |
| .arg = 0, |
| }; |
| u32 out_data; |
| int ret; |
| |
| ret = alienware_wmi_command(pdata->wdev, WMAX_METHOD_DEEP_SLEEP_STATUS, |
| &in_args, sizeof(in_args), &out_data); |
| if (!ret) { |
| if (out_data == 0) |
| return sysfs_emit(buf, "[disabled] s5 s5_s4\n"); |
| else if (out_data == 1) |
| return sysfs_emit(buf, "disabled [s5] s5_s4\n"); |
| else if (out_data == 2) |
| return sysfs_emit(buf, "disabled s5 [s5_s4]\n"); |
| } |
| |
| pr_err("alienware-wmi: unknown deep sleep status: %d\n", ret); |
| return sysfs_emit(buf, "disabled s5 s5_s4 [unknown]\n"); |
| } |
| |
| static ssize_t deepsleep_store(struct device *dev, struct device_attribute *attr, |
| const char *buf, size_t count) |
| { |
| struct alienfx_platdata *pdata = dev_get_platdata(dev); |
| struct wmax_basic_args args; |
| int ret; |
| |
| if (strcmp(buf, "disabled\n") == 0) |
| args.arg = 0; |
| else if (strcmp(buf, "s5\n") == 0) |
| args.arg = 1; |
| else |
| args.arg = 2; |
| pr_debug("alienware-wmi: setting deep sleep to %d : %s", args.arg, buf); |
| |
| ret = alienware_wmi_command(pdata->wdev, WMAX_METHOD_DEEP_SLEEP_CONTROL, |
| &args, sizeof(args), NULL); |
| if (!ret) |
| pr_err("alienware-wmi: deep sleep control failed: results: %u\n", ret); |
| |
| return count; |
| } |
| |
| static DEVICE_ATTR_RW(deepsleep); |
| |
| static bool deepsleep_group_visible(struct kobject *kobj) |
| { |
| return alienware_interface == WMAX && alienfx->deepslp; |
| } |
| DEFINE_SIMPLE_SYSFS_GROUP_VISIBLE(deepsleep); |
| |
| static struct attribute *deepsleep_attrs[] = { |
| &dev_attr_deepsleep.attr, |
| NULL, |
| }; |
| |
| const struct attribute_group wmax_deepsleep_attribute_group = { |
| .name = "deepsleep", |
| .is_visible = SYSFS_GROUP_VISIBLE(deepsleep), |
| .attrs = deepsleep_attrs, |
| }; |
| |
| /* |
| * AWCC Helpers |
| */ |
| static bool is_awcc_thermal_profile_id(u8 code) |
| { |
| u8 table = FIELD_GET(AWCC_THERMAL_TABLE_MASK, code); |
| u8 mode = FIELD_GET(AWCC_THERMAL_MODE_MASK, code); |
| |
| if (mode >= AWCC_PROFILE_LAST) |
| return false; |
| |
| if (table == AWCC_THERMAL_TABLE_LEGACY && mode >= AWCC_PROFILE_LEGACY_QUIET) |
| return true; |
| |
| if (table == AWCC_THERMAL_TABLE_USTT && mode <= AWCC_PROFILE_USTT_LOW_POWER) |
| return true; |
| |
| return false; |
| } |
| |
| static int awcc_wmi_command(struct wmi_device *wdev, u32 method_id, |
| struct wmax_u32_args *args, u32 *out) |
| { |
| int ret; |
| |
| ret = alienware_wmi_command(wdev, method_id, args, sizeof(*args), out); |
| if (ret) |
| return ret; |
| |
| if (*out == AWCC_FAILURE_CODE || *out == AWCC_FAILURE_CODE_2) |
| return -EBADRQC; |
| |
| return 0; |
| } |
| |
| static int awcc_get_fan_sensors(struct wmi_device *wdev, u8 operation, |
| u8 fan_id, u8 index, u32 *out) |
| { |
| struct wmax_u32_args args = { |
| .operation = operation, |
| .arg1 = fan_id, |
| .arg2 = index, |
| .arg3 = 0, |
| }; |
| |
| return awcc_wmi_command(wdev, AWCC_METHOD_GET_FAN_SENSORS, &args, out); |
| } |
| |
| static int awcc_thermal_information(struct wmi_device *wdev, u8 operation, u8 arg, |
| u32 *out) |
| { |
| struct wmax_u32_args args = { |
| .operation = operation, |
| .arg1 = arg, |
| .arg2 = 0, |
| .arg3 = 0, |
| }; |
| |
| return awcc_wmi_command(wdev, AWCC_METHOD_THERMAL_INFORMATION, &args, out); |
| } |
| |
| static int awcc_fwup_gpio_control(struct wmi_device *wdev, u8 pin, u8 status) |
| { |
| struct wmax_u32_args args = { |
| .operation = pin, |
| .arg1 = status, |
| .arg2 = 0, |
| .arg3 = 0, |
| }; |
| u32 out; |
| |
| return awcc_wmi_command(wdev, AWCC_METHOD_FWUP_GPIO_CONTROL, &args, &out); |
| } |
| |
| static int awcc_read_total_gpios(struct wmi_device *wdev, u32 *count) |
| { |
| struct wmax_u32_args args = {}; |
| |
| return awcc_wmi_command(wdev, AWCC_METHOD_READ_TOTAL_GPIOS, &args, count); |
| } |
| |
| static int awcc_read_gpio_status(struct wmi_device *wdev, u8 pin, u32 *status) |
| { |
| struct wmax_u32_args args = { |
| .operation = pin, |
| .arg1 = 0, |
| .arg2 = 0, |
| .arg3 = 0, |
| }; |
| |
| return awcc_wmi_command(wdev, AWCC_METHOD_READ_GPIO_STATUS, &args, status); |
| } |
| |
| static int awcc_game_shift_status(struct wmi_device *wdev, u8 operation, |
| u32 *out) |
| { |
| struct wmax_u32_args args = { |
| .operation = operation, |
| .arg1 = 0, |
| .arg2 = 0, |
| .arg3 = 0, |
| }; |
| |
| return awcc_wmi_command(wdev, AWCC_METHOD_GAME_SHIFT_STATUS, &args, out); |
| } |
| |
| /** |
| * awcc_op_get_resource_id - Get the resource ID at a given index |
| * @wdev: AWCC WMI device |
| * @index: Index |
| * @out: Value returned by the WMI call |
| * |
| * Get the resource ID at a given @index. Resource IDs are listed in the |
| * following order: |
| * |
| * - Fan IDs |
| * - Sensor IDs |
| * - Unknown IDs |
| * - Thermal Profile IDs |
| * |
| * The total number of IDs of a given type can be obtained with |
| * AWCC_OP_GET_SYSTEM_DESCRIPTION. |
| * |
| * Return: 0 on success, -errno on failure |
| */ |
| static int awcc_op_get_resource_id(struct wmi_device *wdev, u8 index, u8 *out) |
| { |
| struct wmax_u32_args args = { |
| .operation = AWCC_OP_GET_RESOURCE_ID, |
| .arg1 = index, |
| .arg2 = 0, |
| .arg3 = 0, |
| }; |
| u32 out_data; |
| int ret; |
| |
| ret = awcc_wmi_command(wdev, AWCC_METHOD_THERMAL_INFORMATION, &args, &out_data); |
| if (ret) |
| return ret; |
| |
| *out = FIELD_GET(AWCC_RESOURCE_ID_MASK, out_data); |
| |
| return 0; |
| } |
| |
| static int awcc_op_get_fan_rpm(struct wmi_device *wdev, u8 fan_id, u32 *out) |
| { |
| struct wmax_u32_args args = { |
| .operation = AWCC_OP_GET_FAN_RPM, |
| .arg1 = fan_id, |
| .arg2 = 0, |
| .arg3 = 0, |
| }; |
| |
| return awcc_wmi_command(wdev, AWCC_METHOD_THERMAL_INFORMATION, &args, out); |
| } |
| |
| static int awcc_op_get_temperature(struct wmi_device *wdev, u8 temp_id, u32 *out) |
| { |
| struct wmax_u32_args args = { |
| .operation = AWCC_OP_GET_TEMPERATURE, |
| .arg1 = temp_id, |
| .arg2 = 0, |
| .arg3 = 0, |
| }; |
| |
| return awcc_wmi_command(wdev, AWCC_METHOD_THERMAL_INFORMATION, &args, out); |
| } |
| |
| static int awcc_op_get_fan_boost(struct wmi_device *wdev, u8 fan_id, u32 *out) |
| { |
| struct wmax_u32_args args = { |
| .operation = AWCC_OP_GET_FAN_BOOST, |
| .arg1 = fan_id, |
| .arg2 = 0, |
| .arg3 = 0, |
| }; |
| |
| return awcc_wmi_command(wdev, AWCC_METHOD_THERMAL_INFORMATION, &args, out); |
| } |
| |
| static int awcc_op_get_current_profile(struct wmi_device *wdev, u32 *out) |
| { |
| struct wmax_u32_args args = { |
| .operation = AWCC_OP_GET_CURRENT_PROFILE, |
| .arg1 = 0, |
| .arg2 = 0, |
| .arg3 = 0, |
| }; |
| |
| return awcc_wmi_command(wdev, AWCC_METHOD_THERMAL_INFORMATION, &args, out); |
| } |
| |
| static int awcc_op_activate_profile(struct wmi_device *wdev, u8 profile) |
| { |
| struct wmax_u32_args args = { |
| .operation = AWCC_OP_ACTIVATE_PROFILE, |
| .arg1 = profile, |
| .arg2 = 0, |
| .arg3 = 0, |
| }; |
| u32 out; |
| |
| return awcc_wmi_command(wdev, AWCC_METHOD_THERMAL_CONTROL, &args, &out); |
| } |
| |
| static int awcc_op_set_fan_boost(struct wmi_device *wdev, u8 fan_id, u8 boost) |
| { |
| struct wmax_u32_args args = { |
| .operation = AWCC_OP_SET_FAN_BOOST, |
| .arg1 = fan_id, |
| .arg2 = boost, |
| .arg3 = 0, |
| }; |
| u32 out; |
| |
| return awcc_wmi_command(wdev, AWCC_METHOD_THERMAL_CONTROL, &args, &out); |
| } |
| |
| /* |
| * HWMON |
| * - Provides temperature and fan speed monitoring as well as manual fan |
| * control |
| */ |
| static umode_t awcc_hwmon_is_visible(const void *drvdata, enum hwmon_sensor_types type, |
| u32 attr, int channel) |
| { |
| const struct awcc_priv *priv = drvdata; |
| unsigned int temp_count; |
| |
| switch (type) { |
| case hwmon_temp: |
| temp_count = bitmap_weight(priv->temp_sensors, AWCC_ID_BITMAP_SIZE); |
| |
| return channel < temp_count ? 0444 : 0; |
| case hwmon_fan: |
| return channel < priv->fan_count ? 0444 : 0; |
| case hwmon_pwm: |
| return channel < priv->fan_count ? 0444 : 0; |
| default: |
| return 0; |
| } |
| } |
| |
| static int awcc_hwmon_read(struct device *dev, enum hwmon_sensor_types type, |
| u32 attr, int channel, long *val) |
| { |
| struct awcc_priv *priv = dev_get_drvdata(dev); |
| const struct awcc_fan_data *fan; |
| u32 state; |
| int ret; |
| u8 temp; |
| |
| switch (type) { |
| case hwmon_temp: |
| temp = find_nth_bit(priv->temp_sensors, AWCC_ID_BITMAP_SIZE, channel); |
| |
| switch (attr) { |
| case hwmon_temp_input: |
| ret = awcc_op_get_temperature(priv->wdev, temp, &state); |
| if (ret) |
| return ret; |
| |
| *val = state * MILLIDEGREE_PER_DEGREE; |
| break; |
| default: |
| return -EOPNOTSUPP; |
| } |
| |
| break; |
| case hwmon_fan: |
| fan = priv->fan_data[channel]; |
| |
| switch (attr) { |
| case hwmon_fan_input: |
| ret = awcc_op_get_fan_rpm(priv->wdev, fan->id, &state); |
| if (ret) |
| return ret; |
| |
| *val = state; |
| break; |
| case hwmon_fan_min: |
| *val = fan->min_rpm; |
| break; |
| case hwmon_fan_max: |
| *val = fan->max_rpm; |
| break; |
| default: |
| return -EOPNOTSUPP; |
| } |
| |
| break; |
| case hwmon_pwm: |
| fan = priv->fan_data[channel]; |
| |
| switch (attr) { |
| case hwmon_pwm_auto_channels_temp: |
| *val = fan->auto_channels_temp; |
| break; |
| default: |
| return -EOPNOTSUPP; |
| } |
| |
| break; |
| default: |
| return -EOPNOTSUPP; |
| } |
| |
| return 0; |
| } |
| |
| static int awcc_hwmon_read_string(struct device *dev, enum hwmon_sensor_types type, |
| u32 attr, int channel, const char **str) |
| { |
| struct awcc_priv *priv = dev_get_drvdata(dev); |
| u8 temp; |
| |
| switch (type) { |
| case hwmon_temp: |
| temp = find_nth_bit(priv->temp_sensors, AWCC_ID_BITMAP_SIZE, channel); |
| |
| switch (temp) { |
| case AWCC_TEMP_SENSOR_CPU: |
| *str = "CPU"; |
| break; |
| case AWCC_TEMP_SENSOR_FRONT: |
| *str = "Front"; |
| break; |
| case AWCC_TEMP_SENSOR_GPU: |
| *str = "GPU"; |
| break; |
| default: |
| *str = "Unknown"; |
| break; |
| } |
| |
| break; |
| case hwmon_fan: |
| switch (priv->fan_data[channel]->id) { |
| case AWCC_FAN_CPU_1: |
| case AWCC_FAN_CPU_2: |
| *str = "CPU Fan"; |
| break; |
| case AWCC_FAN_GPU_1: |
| case AWCC_FAN_GPU_2: |
| *str = "GPU Fan"; |
| break; |
| case AWCC_FAN_PCI: |
| *str = "PCI Fan"; |
| break; |
| case AWCC_FAN_MID: |
| *str = "Mid Fan"; |
| break; |
| case AWCC_FAN_TOP_1: |
| case AWCC_FAN_TOP_2: |
| case AWCC_FAN_TOP_3: |
| *str = "Top Fan"; |
| break; |
| case AWCC_FAN_SIDE: |
| *str = "Side Fan"; |
| break; |
| case AWCC_FAN_U2_1: |
| case AWCC_FAN_U2_2: |
| *str = "U.2 Fan"; |
| break; |
| case AWCC_FAN_FRONT_1: |
| case AWCC_FAN_FRONT_2: |
| *str = "Front Fan"; |
| break; |
| case AWCC_FAN_BOTTOM_1: |
| case AWCC_FAN_BOTTOM_2: |
| *str = "Bottom Fan"; |
| break; |
| default: |
| *str = "Unknown Fan"; |
| break; |
| } |
| |
| break; |
| default: |
| return -EOPNOTSUPP; |
| } |
| |
| return 0; |
| } |
| |
| static const struct hwmon_ops awcc_hwmon_ops = { |
| .is_visible = awcc_hwmon_is_visible, |
| .read = awcc_hwmon_read, |
| .read_string = awcc_hwmon_read_string, |
| }; |
| |
| static const struct hwmon_channel_info * const awcc_hwmon_info[] = { |
| HWMON_CHANNEL_INFO(temp, |
| HWMON_T_LABEL | HWMON_T_INPUT, |
| HWMON_T_LABEL | HWMON_T_INPUT, |
| HWMON_T_LABEL | HWMON_T_INPUT, |
| HWMON_T_LABEL | HWMON_T_INPUT, |
| HWMON_T_LABEL | HWMON_T_INPUT, |
| HWMON_T_LABEL | HWMON_T_INPUT |
| ), |
| HWMON_CHANNEL_INFO(fan, |
| HWMON_F_LABEL | HWMON_F_INPUT | HWMON_F_MIN | HWMON_F_MAX, |
| HWMON_F_LABEL | HWMON_F_INPUT | HWMON_F_MIN | HWMON_F_MAX, |
| HWMON_F_LABEL | HWMON_F_INPUT | HWMON_F_MIN | HWMON_F_MAX, |
| HWMON_F_LABEL | HWMON_F_INPUT | HWMON_F_MIN | HWMON_F_MAX, |
| HWMON_F_LABEL | HWMON_F_INPUT | HWMON_F_MIN | HWMON_F_MAX, |
| HWMON_F_LABEL | HWMON_F_INPUT | HWMON_F_MIN | HWMON_F_MAX |
| ), |
| HWMON_CHANNEL_INFO(pwm, |
| HWMON_PWM_AUTO_CHANNELS_TEMP, |
| HWMON_PWM_AUTO_CHANNELS_TEMP, |
| HWMON_PWM_AUTO_CHANNELS_TEMP, |
| HWMON_PWM_AUTO_CHANNELS_TEMP, |
| HWMON_PWM_AUTO_CHANNELS_TEMP, |
| HWMON_PWM_AUTO_CHANNELS_TEMP |
| ), |
| NULL |
| }; |
| |
| static const struct hwmon_chip_info awcc_hwmon_chip_info = { |
| .ops = &awcc_hwmon_ops, |
| .info = awcc_hwmon_info, |
| }; |
| |
| static ssize_t fan_boost_show(struct device *dev, struct device_attribute *attr, |
| char *buf) |
| { |
| struct awcc_priv *priv = dev_get_drvdata(dev); |
| int index = to_sensor_dev_attr(attr)->index; |
| struct awcc_fan_data *fan = priv->fan_data[index]; |
| u32 boost; |
| int ret; |
| |
| ret = awcc_op_get_fan_boost(priv->wdev, fan->id, &boost); |
| if (ret) |
| return ret; |
| |
| return sysfs_emit(buf, "%u\n", boost); |
| } |
| |
| static ssize_t fan_boost_store(struct device *dev, struct device_attribute *attr, |
| const char *buf, size_t count) |
| { |
| struct awcc_priv *priv = dev_get_drvdata(dev); |
| int index = to_sensor_dev_attr(attr)->index; |
| struct awcc_fan_data *fan = priv->fan_data[index]; |
| unsigned long val; |
| int ret; |
| |
| ret = kstrtoul(buf, 0, &val); |
| if (ret) |
| return ret; |
| |
| ret = awcc_op_set_fan_boost(priv->wdev, fan->id, clamp_val(val, 0, 255)); |
| |
| return ret ? ret : count; |
| } |
| |
| static SENSOR_DEVICE_ATTR_RW(fan1_boost, fan_boost, 0); |
| static SENSOR_DEVICE_ATTR_RW(fan2_boost, fan_boost, 1); |
| static SENSOR_DEVICE_ATTR_RW(fan3_boost, fan_boost, 2); |
| static SENSOR_DEVICE_ATTR_RW(fan4_boost, fan_boost, 3); |
| static SENSOR_DEVICE_ATTR_RW(fan5_boost, fan_boost, 4); |
| static SENSOR_DEVICE_ATTR_RW(fan6_boost, fan_boost, 5); |
| |
| static umode_t fan_boost_attr_visible(struct kobject *kobj, struct attribute *attr, int n) |
| { |
| struct awcc_priv *priv = dev_get_drvdata(kobj_to_dev(kobj)); |
| |
| return n < priv->fan_count ? attr->mode : 0; |
| } |
| |
| static bool fan_boost_group_visible(struct kobject *kobj) |
| { |
| return true; |
| } |
| |
| DEFINE_SYSFS_GROUP_VISIBLE(fan_boost); |
| |
| static struct attribute *fan_boost_attrs[] = { |
| &sensor_dev_attr_fan1_boost.dev_attr.attr, |
| &sensor_dev_attr_fan2_boost.dev_attr.attr, |
| &sensor_dev_attr_fan3_boost.dev_attr.attr, |
| &sensor_dev_attr_fan4_boost.dev_attr.attr, |
| &sensor_dev_attr_fan5_boost.dev_attr.attr, |
| &sensor_dev_attr_fan6_boost.dev_attr.attr, |
| NULL |
| }; |
| |
| static const struct attribute_group fan_boost_group = { |
| .attrs = fan_boost_attrs, |
| .is_visible = SYSFS_GROUP_VISIBLE(fan_boost), |
| }; |
| |
| static const struct attribute_group *awcc_hwmon_groups[] = { |
| &fan_boost_group, |
| NULL |
| }; |
| |
| static int awcc_hwmon_temps_init(struct wmi_device *wdev) |
| { |
| struct awcc_priv *priv = dev_get_drvdata(&wdev->dev); |
| unsigned int i; |
| int ret; |
| u8 id; |
| |
| for (i = 0; i < priv->temp_count; i++) { |
| /* |
| * Temperature sensors IDs are listed after the fan IDs at |
| * offset `fan_count` |
| */ |
| ret = awcc_op_get_resource_id(wdev, i + priv->fan_count, &id); |
| if (ret) |
| return ret; |
| |
| __set_bit(id, priv->temp_sensors); |
| } |
| |
| return 0; |
| } |
| |
| static int awcc_hwmon_fans_init(struct wmi_device *wdev) |
| { |
| struct awcc_priv *priv = dev_get_drvdata(&wdev->dev); |
| unsigned long fan_temps[AWCC_ID_BITMAP_LONGS]; |
| unsigned long gather[AWCC_ID_BITMAP_LONGS]; |
| u32 min_rpm, max_rpm, temp_count, temp_id; |
| struct awcc_fan_data *fan_data; |
| unsigned int i, j; |
| int ret; |
| u8 id; |
| |
| for (i = 0; i < priv->fan_count; i++) { |
| fan_data = devm_kzalloc(&wdev->dev, sizeof(*fan_data), GFP_KERNEL); |
| if (!fan_data) |
| return -ENOMEM; |
| |
| /* |
| * Fan IDs are listed first at offset 0 |
| */ |
| ret = awcc_op_get_resource_id(wdev, i, &id); |
| if (ret) |
| return ret; |
| |
| ret = awcc_thermal_information(wdev, AWCC_OP_GET_FAN_MIN_RPM, id, |
| &min_rpm); |
| if (ret) |
| return ret; |
| |
| ret = awcc_thermal_information(wdev, AWCC_OP_GET_FAN_MAX_RPM, id, |
| &max_rpm); |
| if (ret) |
| return ret; |
| |
| ret = awcc_get_fan_sensors(wdev, AWCC_OP_GET_TOTAL_FAN_TEMPS, id, |
| 0, &temp_count); |
| if (ret) |
| return ret; |
| |
| bitmap_zero(fan_temps, AWCC_ID_BITMAP_SIZE); |
| |
| for (j = 0; j < temp_count; j++) { |
| ret = awcc_get_fan_sensors(wdev, AWCC_OP_GET_FAN_TEMP_ID, |
| id, j, &temp_id); |
| if (ret) |
| break; |
| |
| temp_id = FIELD_GET(AWCC_RESOURCE_ID_MASK, temp_id); |
| __set_bit(temp_id, fan_temps); |
| } |
| |
| fan_data->id = id; |
| fan_data->min_rpm = min_rpm; |
| fan_data->max_rpm = max_rpm; |
| bitmap_gather(gather, fan_temps, priv->temp_sensors, AWCC_ID_BITMAP_SIZE); |
| bitmap_copy(&fan_data->auto_channels_temp, gather, BITS_PER_LONG); |
| priv->fan_data[i] = fan_data; |
| } |
| |
| return 0; |
| } |
| |
| static int awcc_hwmon_init(struct wmi_device *wdev) |
| { |
| struct awcc_priv *priv = dev_get_drvdata(&wdev->dev); |
| int ret; |
| |
| priv->fan_data = devm_kcalloc(&wdev->dev, priv->fan_count, |
| sizeof(*priv->fan_data), GFP_KERNEL); |
| if (!priv->fan_data) |
| return -ENOMEM; |
| |
| ret = awcc_hwmon_temps_init(wdev); |
| if (ret) |
| return ret; |
| |
| ret = awcc_hwmon_fans_init(wdev); |
| if (ret) |
| return ret; |
| |
| priv->hwdev = devm_hwmon_device_register_with_info(&wdev->dev, "alienware_wmi", |
| priv, &awcc_hwmon_chip_info, |
| awcc_hwmon_groups); |
| |
| return PTR_ERR_OR_ZERO(priv->hwdev); |
| } |
| |
| static void awcc_hwmon_suspend(struct device *dev) |
| { |
| struct awcc_priv *priv = dev_get_drvdata(dev); |
| struct awcc_fan_data *fan; |
| unsigned int i; |
| u32 boost; |
| int ret; |
| |
| for (i = 0; i < priv->fan_count; i++) { |
| fan = priv->fan_data[i]; |
| |
| ret = awcc_thermal_information(priv->wdev, AWCC_OP_GET_FAN_BOOST, |
| fan->id, &boost); |
| if (ret) |
| dev_err(dev, "Failed to store Fan %u boost while suspending\n", i); |
| |
| fan->suspend_cache = ret ? 0 : clamp_val(boost, 0, 255); |
| |
| awcc_op_set_fan_boost(priv->wdev, fan->id, 0); |
| if (ret) |
| dev_err(dev, "Failed to set Fan %u boost to 0 while suspending\n", i); |
| } |
| } |
| |
| static void awcc_hwmon_resume(struct device *dev) |
| { |
| struct awcc_priv *priv = dev_get_drvdata(dev); |
| struct awcc_fan_data *fan; |
| unsigned int i; |
| int ret; |
| |
| for (i = 0; i < priv->fan_count; i++) { |
| fan = priv->fan_data[i]; |
| |
| if (!fan->suspend_cache) |
| continue; |
| |
| ret = awcc_op_set_fan_boost(priv->wdev, fan->id, fan->suspend_cache); |
| if (ret) |
| dev_err(dev, "Failed to restore Fan %u boost while resuming\n", i); |
| } |
| } |
| |
| /* |
| * Thermal Profile control |
| * - Provides thermal profile control through the Platform Profile API |
| */ |
| static int awcc_platform_profile_get(struct device *dev, |
| enum platform_profile_option *profile) |
| { |
| struct awcc_priv *priv = dev_get_drvdata(dev); |
| u32 out_data; |
| int ret; |
| |
| ret = awcc_op_get_current_profile(priv->wdev, &out_data); |
| if (ret) |
| return ret; |
| |
| switch (out_data) { |
| case AWCC_SPECIAL_PROFILE_CUSTOM: |
| *profile = PLATFORM_PROFILE_CUSTOM; |
| return 0; |
| case AWCC_SPECIAL_PROFILE_GMODE: |
| *profile = PLATFORM_PROFILE_PERFORMANCE; |
| return 0; |
| default: |
| break; |
| } |
| |
| if (!is_awcc_thermal_profile_id(out_data)) |
| return -ENODATA; |
| |
| out_data = FIELD_GET(AWCC_THERMAL_MODE_MASK, out_data); |
| *profile = awcc_mode_to_platform_profile[out_data]; |
| |
| return 0; |
| } |
| |
| static int awcc_platform_profile_set(struct device *dev, |
| enum platform_profile_option profile) |
| { |
| struct awcc_priv *priv = dev_get_drvdata(dev); |
| |
| if (awcc->gmode) { |
| u32 gmode_status; |
| int ret; |
| |
| ret = awcc_game_shift_status(priv->wdev, |
| AWCC_OP_GET_GAME_SHIFT_STATUS, |
| &gmode_status); |
| |
| if (ret < 0) |
| return ret; |
| |
| if ((profile == PLATFORM_PROFILE_PERFORMANCE && !gmode_status) || |
| (profile != PLATFORM_PROFILE_PERFORMANCE && gmode_status)) { |
| ret = awcc_game_shift_status(priv->wdev, |
| AWCC_OP_TOGGLE_GAME_SHIFT, |
| &gmode_status); |
| |
| if (ret < 0) |
| return ret; |
| } |
| } |
| |
| return awcc_op_activate_profile(priv->wdev, priv->supported_profiles[profile]); |
| } |
| |
| static int awcc_platform_profile_probe(void *drvdata, unsigned long *choices) |
| { |
| enum platform_profile_option profile; |
| struct awcc_priv *priv = drvdata; |
| enum awcc_thermal_profile mode; |
| u8 id, offset = 0; |
| int ret; |
| |
| /* |
| * Thermal profile IDs are listed last at offset |
| * fan_count + temp_count + unknown_count |
| */ |
| for (unsigned int i = 0; i < ARRAY_SIZE(priv->res_count) - 1; i++) |
| offset += priv->res_count[i]; |
| |
| for (unsigned int i = 0; i < priv->profile_count; i++) { |
| ret = awcc_op_get_resource_id(priv->wdev, i + offset, &id); |
| /* |
| * Some devices report an incorrect number of thermal profiles |
| * so the resource ID list may end prematurely |
| */ |
| if (ret == -EBADRQC) |
| break; |
| if (ret) |
| return ret; |
| |
| if (!is_awcc_thermal_profile_id(id)) { |
| dev_dbg(&priv->wdev->dev, "Unmapped thermal profile ID 0x%02x\n", id); |
| continue; |
| } |
| |
| mode = FIELD_GET(AWCC_THERMAL_MODE_MASK, id); |
| profile = awcc_mode_to_platform_profile[mode]; |
| priv->supported_profiles[profile] = id; |
| |
| __set_bit(profile, choices); |
| } |
| |
| if (bitmap_empty(choices, PLATFORM_PROFILE_LAST)) |
| return -ENODEV; |
| |
| if (awcc->gmode) { |
| priv->supported_profiles[PLATFORM_PROFILE_PERFORMANCE] = |
| AWCC_SPECIAL_PROFILE_GMODE; |
| |
| __set_bit(PLATFORM_PROFILE_PERFORMANCE, choices); |
| } |
| |
| /* Every model supports the "custom" profile */ |
| priv->supported_profiles[PLATFORM_PROFILE_CUSTOM] = |
| AWCC_SPECIAL_PROFILE_CUSTOM; |
| |
| __set_bit(PLATFORM_PROFILE_CUSTOM, choices); |
| |
| return 0; |
| } |
| |
| static const struct platform_profile_ops awcc_platform_profile_ops = { |
| .probe = awcc_platform_profile_probe, |
| .profile_get = awcc_platform_profile_get, |
| .profile_set = awcc_platform_profile_set, |
| }; |
| |
| static int awcc_platform_profile_init(struct wmi_device *wdev) |
| { |
| struct awcc_priv *priv = dev_get_drvdata(&wdev->dev); |
| |
| priv->ppdev = devm_platform_profile_register(&wdev->dev, "alienware-wmi", |
| priv, &awcc_platform_profile_ops); |
| |
| return PTR_ERR_OR_ZERO(priv->ppdev); |
| } |
| |
| /* |
| * DebugFS |
| */ |
| static int awcc_debugfs_system_description_read(struct seq_file *seq, void *data) |
| { |
| struct device *dev = seq->private; |
| struct awcc_priv *priv = dev_get_drvdata(dev); |
| |
| seq_printf(seq, "0x%08x\n", priv->system_description); |
| |
| return 0; |
| } |
| |
| static int awcc_debugfs_hwmon_data_read(struct seq_file *seq, void *data) |
| { |
| struct device *dev = seq->private; |
| struct awcc_priv *priv = dev_get_drvdata(dev); |
| const struct awcc_fan_data *fan; |
| unsigned int bit; |
| |
| seq_printf(seq, "Number of fans: %u\n", priv->fan_count); |
| seq_printf(seq, "Number of temperature sensors: %u\n\n", priv->temp_count); |
| |
| for (u32 i = 0; i < priv->fan_count; i++) { |
| fan = priv->fan_data[i]; |
| |
| seq_printf(seq, "Fan %u:\n", i); |
| seq_printf(seq, " ID: 0x%02x\n", fan->id); |
| seq_printf(seq, " Related temperature sensors bitmap: %lu\n", |
| fan->auto_channels_temp); |
| } |
| |
| seq_puts(seq, "\nTemperature sensor IDs:\n"); |
| for_each_set_bit(bit, priv->temp_sensors, AWCC_ID_BITMAP_SIZE) |
| seq_printf(seq, " 0x%02x\n", bit); |
| |
| return 0; |
| } |
| |
| static int awcc_debugfs_pprof_data_read(struct seq_file *seq, void *data) |
| { |
| struct device *dev = seq->private; |
| struct awcc_priv *priv = dev_get_drvdata(dev); |
| |
| seq_printf(seq, "Number of thermal profiles: %u\n\n", priv->profile_count); |
| |
| for (u32 i = 0; i < PLATFORM_PROFILE_LAST; i++) { |
| if (!priv->supported_profiles[i]) |
| continue; |
| |
| seq_printf(seq, "Platform profile %u:\n", i); |
| seq_printf(seq, " ID: 0x%02x\n", priv->supported_profiles[i]); |
| } |
| |
| return 0; |
| } |
| |
| static int awcc_gpio_pin_show(struct seq_file *seq, void *data) |
| { |
| unsigned long pin = debugfs_get_aux_num(seq->file); |
| struct wmi_device *wdev = seq->private; |
| u32 status; |
| int ret; |
| |
| ret = awcc_read_gpio_status(wdev, pin, &status); |
| if (ret) |
| return ret; |
| |
| seq_printf(seq, "%u\n", status); |
| |
| return 0; |
| } |
| |
| static ssize_t awcc_gpio_pin_write(struct file *file, const char __user *buf, |
| size_t count, loff_t *ppos) |
| { |
| unsigned long pin = debugfs_get_aux_num(file); |
| struct seq_file *seq = file->private_data; |
| struct wmi_device *wdev = seq->private; |
| bool status; |
| int ret; |
| |
| if (!ppos || *ppos) |
| return -EINVAL; |
| |
| ret = kstrtobool_from_user(buf, count, &status); |
| if (ret) |
| return ret; |
| |
| ret = awcc_fwup_gpio_control(wdev, pin, status); |
| if (ret) |
| return ret; |
| |
| return count; |
| } |
| |
| DEFINE_SHOW_STORE_ATTRIBUTE(awcc_gpio_pin); |
| |
| static void awcc_debugfs_remove(void *data) |
| { |
| struct dentry *root = data; |
| |
| debugfs_remove(root); |
| } |
| |
| static void awcc_debugfs_init(struct wmi_device *wdev) |
| { |
| struct awcc_priv *priv = dev_get_drvdata(&wdev->dev); |
| struct dentry *root, *gpio_ctl; |
| u32 gpio_count; |
| char name[64]; |
| int ret; |
| |
| scnprintf(name, sizeof(name), "%s-%s", "alienware-wmi", dev_name(&wdev->dev)); |
| root = debugfs_create_dir(name, NULL); |
| |
| debugfs_create_devm_seqfile(&wdev->dev, "system_description", root, |
| awcc_debugfs_system_description_read); |
| |
| if (awcc->hwmon) |
| debugfs_create_devm_seqfile(&wdev->dev, "hwmon_data", root, |
| awcc_debugfs_hwmon_data_read); |
| |
| if (awcc->pprof) |
| debugfs_create_devm_seqfile(&wdev->dev, "pprof_data", root, |
| awcc_debugfs_pprof_data_read); |
| |
| ret = awcc_read_total_gpios(wdev, &gpio_count); |
| if (ret) { |
| dev_dbg(&wdev->dev, "Failed to get total GPIO Pin count\n"); |
| goto out_add_action; |
| } else if (gpio_count > AWCC_MAX_RES_COUNT) { |
| dev_dbg(&wdev->dev, "Reported GPIO Pin count may be incorrect: %u\n", gpio_count); |
| goto out_add_action; |
| } |
| |
| gpio_ctl = debugfs_create_dir("gpio_ctl", root); |
| |
| priv->gpio_count = gpio_count; |
| debugfs_create_u32("total_gpios", 0444, gpio_ctl, &priv->gpio_count); |
| |
| for (unsigned int i = 0; i < gpio_count; i++) { |
| scnprintf(name, sizeof(name), "pin%u", i); |
| debugfs_create_file_aux_num(name, 0644, gpio_ctl, wdev, i, |
| &awcc_gpio_pin_fops); |
| } |
| |
| out_add_action: |
| devm_add_action_or_reset(&wdev->dev, awcc_debugfs_remove, root); |
| } |
| |
| static int alienware_awcc_setup(struct wmi_device *wdev) |
| { |
| struct awcc_priv *priv; |
| int ret; |
| |
| priv = devm_kzalloc(&wdev->dev, sizeof(*priv), GFP_KERNEL); |
| if (!priv) |
| return -ENOMEM; |
| |
| ret = awcc_thermal_information(wdev, AWCC_OP_GET_SYSTEM_DESCRIPTION, |
| 0, &priv->system_description); |
| if (ret < 0) |
| return ret; |
| |
| /* Sanity check */ |
| for (unsigned int i = 0; i < ARRAY_SIZE(priv->res_count); i++) { |
| if (priv->res_count[i] > AWCC_MAX_RES_COUNT) { |
| dev_err(&wdev->dev, "Malformed system description: 0x%08x\n", |
| priv->system_description); |
| return -ENXIO; |
| } |
| } |
| |
| priv->wdev = wdev; |
| dev_set_drvdata(&wdev->dev, priv); |
| |
| if (awcc->hwmon) { |
| ret = awcc_hwmon_init(wdev); |
| if (ret) |
| return ret; |
| } |
| |
| if (awcc->pprof) { |
| ret = awcc_platform_profile_init(wdev); |
| if (ret) |
| return ret; |
| } |
| |
| awcc_debugfs_init(wdev); |
| |
| return 0; |
| } |
| |
| /* |
| * WMAX WMI driver |
| */ |
| static int wmax_wmi_update_led(struct alienfx_priv *priv, |
| struct wmi_device *wdev, u8 location) |
| { |
| struct wmax_led_args in_args = { |
| .led_mask = 1 << location, |
| .colors = priv->colors[location], |
| .state = priv->lighting_control_state, |
| }; |
| |
| return alienware_wmi_command(wdev, WMAX_METHOD_ZONE_CONTROL, &in_args, |
| sizeof(in_args), NULL); |
| } |
| |
| static int wmax_wmi_update_brightness(struct alienfx_priv *priv, |
| struct wmi_device *wdev, u8 brightness) |
| { |
| struct wmax_brightness_args in_args = { |
| .led_mask = 0xFF, |
| .percentage = brightness, |
| }; |
| |
| return alienware_wmi_command(wdev, WMAX_METHOD_BRIGHTNESS, &in_args, |
| sizeof(in_args), NULL); |
| } |
| |
| static int wmax_wmi_probe(struct wmi_device *wdev, const void *context) |
| { |
| struct alienfx_platdata pdata = { |
| .wdev = wdev, |
| .ops = { |
| .upd_led = wmax_wmi_update_led, |
| .upd_brightness = wmax_wmi_update_brightness, |
| }, |
| }; |
| int ret; |
| |
| if (awcc) |
| ret = alienware_awcc_setup(wdev); |
| else |
| ret = alienware_alienfx_setup(&pdata); |
| |
| return ret; |
| } |
| |
| static int wmax_wmi_suspend(struct device *dev) |
| { |
| if (awcc && awcc->hwmon) |
| awcc_hwmon_suspend(dev); |
| |
| return 0; |
| } |
| |
| static int wmax_wmi_resume(struct device *dev) |
| { |
| if (awcc && awcc->hwmon) |
| awcc_hwmon_resume(dev); |
| |
| return 0; |
| } |
| |
| static DEFINE_SIMPLE_DEV_PM_OPS(wmax_wmi_pm_ops, wmax_wmi_suspend, wmax_wmi_resume); |
| |
| static const struct wmi_device_id alienware_wmax_device_id_table[] = { |
| { WMAX_CONTROL_GUID, NULL }, |
| { }, |
| }; |
| MODULE_DEVICE_TABLE(wmi, alienware_wmax_device_id_table); |
| |
| static struct wmi_driver alienware_wmax_wmi_driver = { |
| .driver = { |
| .name = "alienware-wmi-wmax", |
| .probe_type = PROBE_PREFER_ASYNCHRONOUS, |
| .pm = pm_sleep_ptr(&wmax_wmi_pm_ops), |
| }, |
| .id_table = alienware_wmax_device_id_table, |
| .probe = wmax_wmi_probe, |
| .no_singleton = true, |
| }; |
| |
| int __init alienware_wmax_wmi_init(void) |
| { |
| const struct dmi_system_id *id; |
| |
| id = dmi_first_match(awcc_dmi_table); |
| if (id) |
| awcc = id->driver_data; |
| |
| if (force_hwmon) { |
| if (!awcc) |
| awcc = &empty_quirks; |
| |
| awcc->hwmon = true; |
| } |
| |
| if (force_platform_profile) { |
| if (!awcc) |
| awcc = &empty_quirks; |
| |
| awcc->pprof = true; |
| } |
| |
| if (force_gmode) { |
| if (awcc) |
| awcc->gmode = true; |
| else |
| pr_warn("force_gmode requires platform profile support\n"); |
| } |
| |
| return wmi_driver_register(&alienware_wmax_wmi_driver); |
| } |
| |
| void __exit alienware_wmax_wmi_exit(void) |
| { |
| wmi_driver_unregister(&alienware_wmax_wmi_driver); |
| } |