| // SPDX-License-Identifier: GPL-2.0-only | |
| /* | |
| * CPU idle driver for Tegra CPUs | |
| * | |
| * Copyright (c) 2010-2013, NVIDIA Corporation. | |
| * Copyright (c) 2011 Google, Inc. | |
| * Author: Colin Cross <ccross@android.com> | |
| * Gary King <gking@nvidia.com> | |
| * | |
| * Rework for 3.3 by Peter De Schrijver <pdeschrijver@nvidia.com> | |
| * | |
| * Tegra20/124 driver unification by Dmitry Osipenko <digetx@gmail.com> | |
| */ | |
| #define pr_fmt(fmt) "tegra-cpuidle: " fmt | |
| #include <linux/atomic.h> | |
| #include <linux/cpuidle.h> | |
| #include <linux/cpumask.h> | |
| #include <linux/cpu_pm.h> | |
| #include <linux/delay.h> | |
| #include <linux/errno.h> | |
| #include <linux/platform_device.h> | |
| #include <linux/types.h> | |
| #include <linux/clk/tegra.h> | |
| #include <linux/firmware/trusted_foundations.h> | |
| #include <soc/tegra/cpuidle.h> | |
| #include <soc/tegra/flowctrl.h> | |
| #include <soc/tegra/fuse.h> | |
| #include <soc/tegra/irq.h> | |
| #include <soc/tegra/pm.h> | |
| #include <soc/tegra/pmc.h> | |
| #include <asm/cpuidle.h> | |
| #include <asm/firmware.h> | |
| #include <asm/smp_plat.h> | |
| #include <asm/suspend.h> | |
| enum tegra_state { | |
| TEGRA_C1, | |
| TEGRA_C7, | |
| TEGRA_CC6, | |
| TEGRA_STATE_COUNT, | |
| }; | |
| static atomic_t tegra_idle_barrier; | |
| static atomic_t tegra_abort_flag; | |
| static void tegra_cpuidle_report_cpus_state(void) | |
| { | |
| unsigned long cpu, lcpu, csr; | |
| for_each_cpu(lcpu, cpu_possible_mask) { | |
| cpu = cpu_logical_map(lcpu); | |
| csr = flowctrl_read_cpu_csr(cpu); | |
| pr_err("cpu%lu: online=%d flowctrl_csr=0x%08lx\n", | |
| cpu, cpu_online(lcpu), csr); | |
| } | |
| } | |
| static int tegra_cpuidle_wait_for_secondary_cpus_parking(void) | |
| { | |
| unsigned int retries = 3; | |
| while (retries--) { | |
| unsigned int delay_us = 10; | |
| unsigned int timeout_us = 500 * 1000 / delay_us; | |
| /* | |
| * The primary CPU0 core shall wait for the secondaries | |
| * shutdown in order to power-off CPU's cluster safely. | |
| * The timeout value depends on the current CPU frequency, | |
| * it takes about 40-150us in average and over 1000us in | |
| * a worst case scenario. | |
| */ | |
| do { | |
| if (tegra_cpu_rail_off_ready()) | |
| return 0; | |
| udelay(delay_us); | |
| } while (timeout_us--); | |
| pr_err("secondary CPU taking too long to park\n"); | |
| tegra_cpuidle_report_cpus_state(); | |
| } | |
| pr_err("timed out waiting secondaries to park\n"); | |
| return -ETIMEDOUT; | |
| } | |
| static void tegra_cpuidle_unpark_secondary_cpus(void) | |
| { | |
| unsigned int cpu, lcpu; | |
| for_each_cpu(lcpu, cpu_online_mask) { | |
| cpu = cpu_logical_map(lcpu); | |
| if (cpu > 0) { | |
| tegra_enable_cpu_clock(cpu); | |
| tegra_cpu_out_of_reset(cpu); | |
| flowctrl_write_cpu_halt(cpu, 0); | |
| } | |
| } | |
| } | |
| static int tegra_cpuidle_cc6_enter(unsigned int cpu) | |
| { | |
| int ret; | |
| if (cpu > 0) { | |
| ret = cpu_suspend(cpu, tegra_pm_park_secondary_cpu); | |
| } else { | |
| ret = tegra_cpuidle_wait_for_secondary_cpus_parking(); | |
| if (!ret) | |
| ret = tegra_pm_enter_lp2(); | |
| tegra_cpuidle_unpark_secondary_cpus(); | |
| } | |
| return ret; | |
| } | |
| static int tegra_cpuidle_c7_enter(void) | |
| { | |
| int err; | |
| err = call_firmware_op(prepare_idle, TF_PM_MODE_LP2_NOFLUSH_L2); | |
| if (err && err != -ENOSYS) | |
| return err; | |
| return cpu_suspend(0, tegra30_pm_secondary_cpu_suspend); | |
| } | |
| static int tegra_cpuidle_coupled_barrier(struct cpuidle_device *dev) | |
| { | |
| if (tegra_pending_sgi()) { | |
| /* | |
| * CPU got local interrupt that will be lost after GIC's | |
| * shutdown because GIC driver doesn't save/restore the | |
| * pending SGI state across CPU cluster PM. Abort and retry | |
| * next time. | |
| */ | |
| atomic_set(&tegra_abort_flag, 1); | |
| } | |
| cpuidle_coupled_parallel_barrier(dev, &tegra_idle_barrier); | |
| if (atomic_read(&tegra_abort_flag)) { | |
| cpuidle_coupled_parallel_barrier(dev, &tegra_idle_barrier); | |
| atomic_set(&tegra_abort_flag, 0); | |
| return -EINTR; | |
| } | |
| return 0; | |
| } | |
| static __cpuidle int tegra_cpuidle_state_enter(struct cpuidle_device *dev, | |
| int index, unsigned int cpu) | |
| { | |
| int err; | |
| /* | |
| * CC6 state is the "CPU cluster power-off" state. In order to | |
| * enter this state, at first the secondary CPU cores need to be | |
| * parked into offline mode, then the last CPU should clean out | |
| * remaining dirty cache lines into DRAM and trigger Flow Controller | |
| * logic that turns off the cluster's power domain (which includes | |
| * CPU cores, GIC and L2 cache). | |
| */ | |
| if (index == TEGRA_CC6) { | |
| err = tegra_cpuidle_coupled_barrier(dev); | |
| if (err) | |
| return err; | |
| } | |
| local_fiq_disable(); | |
| tegra_pm_set_cpu_in_lp2(); | |
| cpu_pm_enter(); | |
| ct_cpuidle_enter(); | |
| switch (index) { | |
| case TEGRA_C7: | |
| err = tegra_cpuidle_c7_enter(); | |
| break; | |
| case TEGRA_CC6: | |
| err = tegra_cpuidle_cc6_enter(cpu); | |
| break; | |
| default: | |
| err = -EINVAL; | |
| break; | |
| } | |
| ct_cpuidle_exit(); | |
| cpu_pm_exit(); | |
| tegra_pm_clear_cpu_in_lp2(); | |
| local_fiq_enable(); | |
| return err ?: index; | |
| } | |
| static int tegra_cpuidle_adjust_state_index(int index, unsigned int cpu) | |
| { | |
| /* | |
| * On Tegra30 CPU0 can't be power-gated separately from secondary | |
| * cores because it gates the whole CPU cluster. | |
| */ | |
| if (cpu > 0 || index != TEGRA_C7 || tegra_get_chip_id() != TEGRA30) | |
| return index; | |
| /* put CPU0 into C1 if C7 is requested and secondaries are online */ | |
| if (!IS_ENABLED(CONFIG_PM_SLEEP) || num_online_cpus() > 1) | |
| index = TEGRA_C1; | |
| else | |
| index = TEGRA_CC6; | |
| return index; | |
| } | |
| static __cpuidle int tegra_cpuidle_enter(struct cpuidle_device *dev, | |
| struct cpuidle_driver *drv, | |
| int index) | |
| { | |
| bool do_rcu = drv->states[index].flags & CPUIDLE_FLAG_RCU_IDLE; | |
| unsigned int cpu = cpu_logical_map(dev->cpu); | |
| int ret; | |
| index = tegra_cpuidle_adjust_state_index(index, cpu); | |
| if (dev->states_usage[index].disable) | |
| return -1; | |
| if (index == TEGRA_C1) { | |
| if (do_rcu) | |
| ct_cpuidle_enter(); | |
| ret = arm_cpuidle_simple_enter(dev, drv, index); | |
| if (do_rcu) | |
| ct_cpuidle_exit(); | |
| } else | |
| ret = tegra_cpuidle_state_enter(dev, index, cpu); | |
| if (ret < 0) { | |
| if (ret != -EINTR || index != TEGRA_CC6) | |
| pr_err_once("failed to enter state %d err: %d\n", | |
| index, ret); | |
| index = -1; | |
| } else { | |
| index = ret; | |
| } | |
| return index; | |
| } | |
| static int tegra114_enter_s2idle(struct cpuidle_device *dev, | |
| struct cpuidle_driver *drv, | |
| int index) | |
| { | |
| tegra_cpuidle_enter(dev, drv, index); | |
| return 0; | |
| } | |
| /* | |
| * The previous versions of Tegra CPUIDLE driver used a different "legacy" | |
| * terminology for naming of the idling states, while this driver uses the | |
| * new terminology. | |
| * | |
| * Mapping of the old terms into the new ones: | |
| * | |
| * Old | New | |
| * --------- | |
| * LP3 | C1 (CPU core clock gating) | |
| * LP2 | C7 (CPU core power gating) | |
| * LP2 | CC6 (CPU cluster power gating) | |
| * | |
| * Note that that the older CPUIDLE driver versions didn't explicitly | |
| * differentiate the LP2 states because these states either used the same | |
| * code path or because CC6 wasn't supported. | |
| */ | |
| static struct cpuidle_driver tegra_idle_driver = { | |
| .name = "tegra_idle", | |
| .states = { | |
| [TEGRA_C1] = ARM_CPUIDLE_WFI_STATE_PWR(600), | |
| [TEGRA_C7] = { | |
| .enter = tegra_cpuidle_enter, | |
| .exit_latency = 2000, | |
| .target_residency = 2200, | |
| .power_usage = 100, | |
| .flags = CPUIDLE_FLAG_TIMER_STOP | | |
| CPUIDLE_FLAG_RCU_IDLE, | |
| .name = "C7", | |
| .desc = "CPU core powered off", | |
| }, | |
| [TEGRA_CC6] = { | |
| .enter = tegra_cpuidle_enter, | |
| .exit_latency = 5000, | |
| .target_residency = 10000, | |
| .power_usage = 0, | |
| .flags = CPUIDLE_FLAG_TIMER_STOP | | |
| CPUIDLE_FLAG_RCU_IDLE | | |
| CPUIDLE_FLAG_COUPLED, | |
| .name = "CC6", | |
| .desc = "CPU cluster powered off", | |
| }, | |
| }, | |
| .state_count = TEGRA_STATE_COUNT, | |
| .safe_state_index = TEGRA_C1, | |
| }; | |
| static inline void tegra_cpuidle_disable_state(enum tegra_state state) | |
| { | |
| cpuidle_driver_state_disabled(&tegra_idle_driver, state, true); | |
| } | |
| /* | |
| * Tegra20 HW appears to have a bug such that PCIe device interrupts, whether | |
| * they are legacy IRQs or MSI, are lost when CC6 is enabled. To work around | |
| * this, simply disable CC6 if the PCI driver and DT node are both enabled. | |
| */ | |
| void tegra_cpuidle_pcie_irqs_in_use(void) | |
| { | |
| struct cpuidle_state *state_cc6 = &tegra_idle_driver.states[TEGRA_CC6]; | |
| if ((state_cc6->flags & CPUIDLE_FLAG_UNUSABLE) || | |
| tegra_get_chip_id() != TEGRA20) | |
| return; | |
| pr_info("disabling CC6 state, since PCIe IRQs are in use\n"); | |
| tegra_cpuidle_disable_state(TEGRA_CC6); | |
| } | |
| EXPORT_SYMBOL_GPL(tegra_cpuidle_pcie_irqs_in_use); | |
| static void tegra_cpuidle_setup_tegra114_c7_state(void) | |
| { | |
| struct cpuidle_state *s = &tegra_idle_driver.states[TEGRA_C7]; | |
| s->enter_s2idle = tegra114_enter_s2idle; | |
| s->target_residency = 1000; | |
| s->exit_latency = 500; | |
| } | |
| static int tegra_cpuidle_probe(struct platform_device *pdev) | |
| { | |
| if (tegra_pmc_get_suspend_mode() == TEGRA_SUSPEND_NOT_READY) | |
| return -EPROBE_DEFER; | |
| /* LP2 could be disabled in device-tree */ | |
| if (tegra_pmc_get_suspend_mode() < TEGRA_SUSPEND_LP2) | |
| tegra_cpuidle_disable_state(TEGRA_CC6); | |
| /* | |
| * Required suspend-resume functionality, which is provided by the | |
| * Tegra-arch core and PMC driver, is unavailable if PM-sleep option | |
| * is disabled. | |
| */ | |
| if (!IS_ENABLED(CONFIG_PM_SLEEP)) { | |
| tegra_cpuidle_disable_state(TEGRA_C7); | |
| tegra_cpuidle_disable_state(TEGRA_CC6); | |
| } | |
| /* | |
| * Generic WFI state (also known as C1 or LP3) and the coupled CPU | |
| * cluster power-off (CC6 or LP2) states are common for all Tegra SoCs. | |
| */ | |
| switch (tegra_get_chip_id()) { | |
| case TEGRA20: | |
| /* Tegra20 isn't capable to power-off individual CPU cores */ | |
| tegra_cpuidle_disable_state(TEGRA_C7); | |
| break; | |
| case TEGRA30: | |
| break; | |
| case TEGRA114: | |
| case TEGRA124: | |
| tegra_cpuidle_setup_tegra114_c7_state(); | |
| /* coupled CC6 (LP2) state isn't implemented yet */ | |
| tegra_cpuidle_disable_state(TEGRA_CC6); | |
| break; | |
| default: | |
| return -EINVAL; | |
| } | |
| return cpuidle_register(&tegra_idle_driver, cpu_possible_mask); | |
| } | |
| static struct platform_driver tegra_cpuidle_driver = { | |
| .probe = tegra_cpuidle_probe, | |
| .driver = { | |
| .name = "tegra-cpuidle", | |
| }, | |
| }; | |
| builtin_platform_driver(tegra_cpuidle_driver); |