| // SPDX-License-Identifier: GPL-2.0 | |
| // | |
| // Copyright (c) 2017-2019 Samuel Holland <samuel@sholland.org> | |
| #include <linux/bitops.h> | |
| #include <linux/clk.h> | |
| #include <linux/device.h> | |
| #include <linux/err.h> | |
| #include <linux/interrupt.h> | |
| #include <linux/io.h> | |
| #include <linux/kernel.h> | |
| #include <linux/mailbox_controller.h> | |
| #include <linux/module.h> | |
| #include <linux/of.h> | |
| #include <linux/of_irq.h> | |
| #include <linux/platform_device.h> | |
| #include <linux/reset.h> | |
| #include <linux/spinlock.h> | |
| #define NUM_CHANS 8 | |
| #define CTRL_REG(n) (0x0000 + 0x4 * ((n) / 4)) | |
| #define CTRL_RX(n) BIT(0 + 8 * ((n) % 4)) | |
| #define CTRL_TX(n) BIT(4 + 8 * ((n) % 4)) | |
| #define REMOTE_IRQ_EN_REG 0x0040 | |
| #define REMOTE_IRQ_STAT_REG 0x0050 | |
| #define LOCAL_IRQ_EN_REG 0x0060 | |
| #define LOCAL_IRQ_STAT_REG 0x0070 | |
| #define RX_IRQ(n) BIT(0 + 2 * (n)) | |
| #define RX_IRQ_MASK 0x5555 | |
| #define TX_IRQ(n) BIT(1 + 2 * (n)) | |
| #define TX_IRQ_MASK 0xaaaa | |
| #define FIFO_STAT_REG(n) (0x0100 + 0x4 * (n)) | |
| #define FIFO_STAT_MASK GENMASK(0, 0) | |
| #define MSG_STAT_REG(n) (0x0140 + 0x4 * (n)) | |
| #define MSG_STAT_MASK GENMASK(2, 0) | |
| #define MSG_DATA_REG(n) (0x0180 + 0x4 * (n)) | |
| #define mbox_dbg(mbox, ...) dev_dbg((mbox)->controller.dev, __VA_ARGS__) | |
| struct sun6i_msgbox { | |
| struct mbox_controller controller; | |
| struct clk *clk; | |
| spinlock_t lock; | |
| void __iomem *regs; | |
| }; | |
| static bool sun6i_msgbox_last_tx_done(struct mbox_chan *chan); | |
| static bool sun6i_msgbox_peek_data(struct mbox_chan *chan); | |
| static inline int channel_number(struct mbox_chan *chan) | |
| { | |
| return chan - chan->mbox->chans; | |
| } | |
| static inline struct sun6i_msgbox *to_sun6i_msgbox(struct mbox_chan *chan) | |
| { | |
| return chan->con_priv; | |
| } | |
| static irqreturn_t sun6i_msgbox_irq(int irq, void *dev_id) | |
| { | |
| struct sun6i_msgbox *mbox = dev_id; | |
| uint32_t status; | |
| int n; | |
| /* Only examine channels that are currently enabled. */ | |
| status = readl(mbox->regs + LOCAL_IRQ_EN_REG) & | |
| readl(mbox->regs + LOCAL_IRQ_STAT_REG); | |
| if (!(status & RX_IRQ_MASK)) | |
| return IRQ_NONE; | |
| for (n = 0; n < NUM_CHANS; ++n) { | |
| struct mbox_chan *chan = &mbox->controller.chans[n]; | |
| if (!(status & RX_IRQ(n))) | |
| continue; | |
| while (sun6i_msgbox_peek_data(chan)) { | |
| uint32_t msg = readl(mbox->regs + MSG_DATA_REG(n)); | |
| mbox_dbg(mbox, "Channel %d received 0x%08x\n", n, msg); | |
| mbox_chan_received_data(chan, &msg); | |
| } | |
| /* The IRQ can be cleared only once the FIFO is empty. */ | |
| writel(RX_IRQ(n), mbox->regs + LOCAL_IRQ_STAT_REG); | |
| } | |
| return IRQ_HANDLED; | |
| } | |
| static int sun6i_msgbox_send_data(struct mbox_chan *chan, void *data) | |
| { | |
| struct sun6i_msgbox *mbox = to_sun6i_msgbox(chan); | |
| int n = channel_number(chan); | |
| uint32_t msg = *(uint32_t *)data; | |
| /* Using a channel backwards gets the hardware into a bad state. */ | |
| if (WARN_ON_ONCE(!(readl(mbox->regs + CTRL_REG(n)) & CTRL_TX(n)))) | |
| return 0; | |
| writel(msg, mbox->regs + MSG_DATA_REG(n)); | |
| mbox_dbg(mbox, "Channel %d sent 0x%08x\n", n, msg); | |
| return 0; | |
| } | |
| static int sun6i_msgbox_startup(struct mbox_chan *chan) | |
| { | |
| struct sun6i_msgbox *mbox = to_sun6i_msgbox(chan); | |
| int n = channel_number(chan); | |
| /* The coprocessor is responsible for setting channel directions. */ | |
| if (readl(mbox->regs + CTRL_REG(n)) & CTRL_RX(n)) { | |
| /* Flush the receive FIFO. */ | |
| while (sun6i_msgbox_peek_data(chan)) | |
| readl(mbox->regs + MSG_DATA_REG(n)); | |
| writel(RX_IRQ(n), mbox->regs + LOCAL_IRQ_STAT_REG); | |
| /* Enable the receive IRQ. */ | |
| spin_lock(&mbox->lock); | |
| writel(readl(mbox->regs + LOCAL_IRQ_EN_REG) | RX_IRQ(n), | |
| mbox->regs + LOCAL_IRQ_EN_REG); | |
| spin_unlock(&mbox->lock); | |
| } | |
| mbox_dbg(mbox, "Channel %d startup complete\n", n); | |
| return 0; | |
| } | |
| static void sun6i_msgbox_shutdown(struct mbox_chan *chan) | |
| { | |
| struct sun6i_msgbox *mbox = to_sun6i_msgbox(chan); | |
| int n = channel_number(chan); | |
| if (readl(mbox->regs + CTRL_REG(n)) & CTRL_RX(n)) { | |
| /* Disable the receive IRQ. */ | |
| spin_lock(&mbox->lock); | |
| writel(readl(mbox->regs + LOCAL_IRQ_EN_REG) & ~RX_IRQ(n), | |
| mbox->regs + LOCAL_IRQ_EN_REG); | |
| spin_unlock(&mbox->lock); | |
| /* Attempt to flush the FIFO until the IRQ is cleared. */ | |
| do { | |
| while (sun6i_msgbox_peek_data(chan)) | |
| readl(mbox->regs + MSG_DATA_REG(n)); | |
| writel(RX_IRQ(n), mbox->regs + LOCAL_IRQ_STAT_REG); | |
| } while (readl(mbox->regs + LOCAL_IRQ_STAT_REG) & RX_IRQ(n)); | |
| } | |
| mbox_dbg(mbox, "Channel %d shutdown complete\n", n); | |
| } | |
| static bool sun6i_msgbox_last_tx_done(struct mbox_chan *chan) | |
| { | |
| struct sun6i_msgbox *mbox = to_sun6i_msgbox(chan); | |
| int n = channel_number(chan); | |
| /* | |
| * The hardware allows snooping on the remote user's IRQ statuses. | |
| * We consider a message to be acknowledged only once the receive IRQ | |
| * for that channel is cleared. Since the receive IRQ for a channel | |
| * cannot be cleared until the FIFO for that channel is empty, this | |
| * ensures that the message has actually been read. It also gives the | |
| * recipient an opportunity to perform minimal processing before | |
| * acknowledging the message. | |
| */ | |
| return !(readl(mbox->regs + REMOTE_IRQ_STAT_REG) & RX_IRQ(n)); | |
| } | |
| static bool sun6i_msgbox_peek_data(struct mbox_chan *chan) | |
| { | |
| struct sun6i_msgbox *mbox = to_sun6i_msgbox(chan); | |
| int n = channel_number(chan); | |
| return readl(mbox->regs + MSG_STAT_REG(n)) & MSG_STAT_MASK; | |
| } | |
| static const struct mbox_chan_ops sun6i_msgbox_chan_ops = { | |
| .send_data = sun6i_msgbox_send_data, | |
| .startup = sun6i_msgbox_startup, | |
| .shutdown = sun6i_msgbox_shutdown, | |
| .last_tx_done = sun6i_msgbox_last_tx_done, | |
| .peek_data = sun6i_msgbox_peek_data, | |
| }; | |
| static int sun6i_msgbox_probe(struct platform_device *pdev) | |
| { | |
| struct device *dev = &pdev->dev; | |
| struct mbox_chan *chans; | |
| struct reset_control *reset; | |
| struct sun6i_msgbox *mbox; | |
| int i, ret; | |
| mbox = devm_kzalloc(dev, sizeof(*mbox), GFP_KERNEL); | |
| if (!mbox) | |
| return -ENOMEM; | |
| chans = devm_kcalloc(dev, NUM_CHANS, sizeof(*chans), GFP_KERNEL); | |
| if (!chans) | |
| return -ENOMEM; | |
| for (i = 0; i < NUM_CHANS; ++i) | |
| chans[i].con_priv = mbox; | |
| mbox->clk = devm_clk_get(dev, NULL); | |
| if (IS_ERR(mbox->clk)) { | |
| ret = PTR_ERR(mbox->clk); | |
| dev_err(dev, "Failed to get clock: %d\n", ret); | |
| return ret; | |
| } | |
| ret = clk_prepare_enable(mbox->clk); | |
| if (ret) { | |
| dev_err(dev, "Failed to enable clock: %d\n", ret); | |
| return ret; | |
| } | |
| reset = devm_reset_control_get_exclusive(dev, NULL); | |
| if (IS_ERR(reset)) { | |
| ret = PTR_ERR(reset); | |
| dev_err(dev, "Failed to get reset control: %d\n", ret); | |
| goto err_disable_unprepare; | |
| } | |
| /* | |
| * NOTE: We rely on platform firmware to preconfigure the channel | |
| * directions, and we share this hardware block with other firmware | |
| * that runs concurrently with Linux (e.g. a trusted monitor). | |
| * | |
| * Therefore, we do *not* assert the reset line if probing fails or | |
| * when removing the device. | |
| */ | |
| ret = reset_control_deassert(reset); | |
| if (ret) { | |
| dev_err(dev, "Failed to deassert reset: %d\n", ret); | |
| goto err_disable_unprepare; | |
| } | |
| mbox->regs = devm_platform_ioremap_resource(pdev, 0); | |
| if (IS_ERR(mbox->regs)) { | |
| ret = PTR_ERR(mbox->regs); | |
| dev_err(dev, "Failed to map MMIO resource: %d\n", ret); | |
| goto err_disable_unprepare; | |
| } | |
| /* Disable all IRQs for this end of the msgbox. */ | |
| writel(0, mbox->regs + LOCAL_IRQ_EN_REG); | |
| ret = devm_request_irq(dev, irq_of_parse_and_map(dev->of_node, 0), | |
| sun6i_msgbox_irq, 0, dev_name(dev), mbox); | |
| if (ret) { | |
| dev_err(dev, "Failed to register IRQ handler: %d\n", ret); | |
| goto err_disable_unprepare; | |
| } | |
| mbox->controller.dev = dev; | |
| mbox->controller.ops = &sun6i_msgbox_chan_ops; | |
| mbox->controller.chans = chans; | |
| mbox->controller.num_chans = NUM_CHANS; | |
| mbox->controller.txdone_irq = false; | |
| mbox->controller.txdone_poll = true; | |
| mbox->controller.txpoll_period = 5; | |
| spin_lock_init(&mbox->lock); | |
| platform_set_drvdata(pdev, mbox); | |
| ret = mbox_controller_register(&mbox->controller); | |
| if (ret) { | |
| dev_err(dev, "Failed to register controller: %d\n", ret); | |
| goto err_disable_unprepare; | |
| } | |
| return 0; | |
| err_disable_unprepare: | |
| clk_disable_unprepare(mbox->clk); | |
| return ret; | |
| } | |
| static void sun6i_msgbox_remove(struct platform_device *pdev) | |
| { | |
| struct sun6i_msgbox *mbox = platform_get_drvdata(pdev); | |
| mbox_controller_unregister(&mbox->controller); | |
| /* See the comment in sun6i_msgbox_probe about the reset line. */ | |
| clk_disable_unprepare(mbox->clk); | |
| } | |
| static const struct of_device_id sun6i_msgbox_of_match[] = { | |
| { .compatible = "allwinner,sun6i-a31-msgbox", }, | |
| {}, | |
| }; | |
| MODULE_DEVICE_TABLE(of, sun6i_msgbox_of_match); | |
| static struct platform_driver sun6i_msgbox_driver = { | |
| .driver = { | |
| .name = "sun6i-msgbox", | |
| .of_match_table = sun6i_msgbox_of_match, | |
| }, | |
| .probe = sun6i_msgbox_probe, | |
| .remove = sun6i_msgbox_remove, | |
| }; | |
| module_platform_driver(sun6i_msgbox_driver); | |
| MODULE_AUTHOR("Samuel Holland <samuel@sholland.org>"); | |
| MODULE_DESCRIPTION("Allwinner sun6i/sun8i/sun9i/sun50i Message Box"); | |
| MODULE_LICENSE("GPL v2"); |