| // SPDX-License-Identifier: GPL-2.0-only | |
| /* | |
| * IMG Pistachio USB PHY driver | |
| * | |
| * Copyright (C) 2015 Google, Inc. | |
| */ | |
| #include <linux/clk.h> | |
| #include <linux/delay.h> | |
| #include <linux/io.h> | |
| #include <linux/kernel.h> | |
| #include <linux/mfd/syscon.h> | |
| #include <linux/module.h> | |
| #include <linux/of.h> | |
| #include <linux/phy/phy.h> | |
| #include <linux/platform_device.h> | |
| #include <linux/regmap.h> | |
| #include <dt-bindings/phy/phy-pistachio-usb.h> | |
| #define USB_PHY_CONTROL1 0x04 | |
| #define USB_PHY_CONTROL1_FSEL_SHIFT 2 | |
| #define USB_PHY_CONTROL1_FSEL_MASK 0x7 | |
| #define USB_PHY_STRAP_CONTROL 0x10 | |
| #define USB_PHY_STRAP_CONTROL_REFCLK_SHIFT 4 | |
| #define USB_PHY_STRAP_CONTROL_REFCLK_MASK 0x3 | |
| #define USB_PHY_STATUS 0x14 | |
| #define USB_PHY_STATUS_RX_PHY_CLK BIT(9) | |
| #define USB_PHY_STATUS_RX_UTMI_CLK BIT(8) | |
| #define USB_PHY_STATUS_VBUS_FAULT BIT(7) | |
| struct pistachio_usb_phy { | |
| struct device *dev; | |
| struct regmap *cr_top; | |
| struct clk *phy_clk; | |
| unsigned int refclk; | |
| }; | |
| static const unsigned long fsel_rate_map[] = { | |
| 9600000, | |
| 10000000, | |
| 12000000, | |
| 19200000, | |
| 20000000, | |
| 24000000, | |
| 0, | |
| 50000000, | |
| }; | |
| static int pistachio_usb_phy_power_on(struct phy *phy) | |
| { | |
| struct pistachio_usb_phy *p_phy = phy_get_drvdata(phy); | |
| unsigned long timeout, rate; | |
| unsigned int i; | |
| int ret; | |
| ret = clk_prepare_enable(p_phy->phy_clk); | |
| if (ret < 0) { | |
| dev_err(p_phy->dev, "Failed to enable PHY clock: %d\n", ret); | |
| return ret; | |
| } | |
| regmap_update_bits(p_phy->cr_top, USB_PHY_STRAP_CONTROL, | |
| USB_PHY_STRAP_CONTROL_REFCLK_MASK << | |
| USB_PHY_STRAP_CONTROL_REFCLK_SHIFT, | |
| p_phy->refclk << USB_PHY_STRAP_CONTROL_REFCLK_SHIFT); | |
| rate = clk_get_rate(p_phy->phy_clk); | |
| if (p_phy->refclk == REFCLK_XO_CRYSTAL && rate != 12000000) { | |
| dev_err(p_phy->dev, "Unsupported rate for XO crystal: %ld\n", | |
| rate); | |
| ret = -EINVAL; | |
| goto disable_clk; | |
| } | |
| for (i = 0; i < ARRAY_SIZE(fsel_rate_map); i++) { | |
| if (rate == fsel_rate_map[i]) | |
| break; | |
| } | |
| if (i == ARRAY_SIZE(fsel_rate_map)) { | |
| dev_err(p_phy->dev, "Unsupported clock rate: %lu\n", rate); | |
| ret = -EINVAL; | |
| goto disable_clk; | |
| } | |
| regmap_update_bits(p_phy->cr_top, USB_PHY_CONTROL1, | |
| USB_PHY_CONTROL1_FSEL_MASK << | |
| USB_PHY_CONTROL1_FSEL_SHIFT, | |
| i << USB_PHY_CONTROL1_FSEL_SHIFT); | |
| timeout = jiffies + msecs_to_jiffies(200); | |
| while (time_before(jiffies, timeout)) { | |
| unsigned int val; | |
| regmap_read(p_phy->cr_top, USB_PHY_STATUS, &val); | |
| if (val & USB_PHY_STATUS_VBUS_FAULT) { | |
| dev_err(p_phy->dev, "VBUS fault detected\n"); | |
| ret = -EIO; | |
| goto disable_clk; | |
| } | |
| if ((val & USB_PHY_STATUS_RX_PHY_CLK) && | |
| (val & USB_PHY_STATUS_RX_UTMI_CLK)) | |
| return 0; | |
| usleep_range(1000, 1500); | |
| } | |
| dev_err(p_phy->dev, "Timed out waiting for PHY to power on\n"); | |
| ret = -ETIMEDOUT; | |
| disable_clk: | |
| clk_disable_unprepare(p_phy->phy_clk); | |
| return ret; | |
| } | |
| static int pistachio_usb_phy_power_off(struct phy *phy) | |
| { | |
| struct pistachio_usb_phy *p_phy = phy_get_drvdata(phy); | |
| clk_disable_unprepare(p_phy->phy_clk); | |
| return 0; | |
| } | |
| static const struct phy_ops pistachio_usb_phy_ops = { | |
| .power_on = pistachio_usb_phy_power_on, | |
| .power_off = pistachio_usb_phy_power_off, | |
| .owner = THIS_MODULE, | |
| }; | |
| static int pistachio_usb_phy_probe(struct platform_device *pdev) | |
| { | |
| struct pistachio_usb_phy *p_phy; | |
| struct phy_provider *provider; | |
| struct phy *phy; | |
| int ret; | |
| p_phy = devm_kzalloc(&pdev->dev, sizeof(*p_phy), GFP_KERNEL); | |
| if (!p_phy) | |
| return -ENOMEM; | |
| p_phy->dev = &pdev->dev; | |
| platform_set_drvdata(pdev, p_phy); | |
| p_phy->cr_top = syscon_regmap_lookup_by_phandle(p_phy->dev->of_node, | |
| "img,cr-top"); | |
| if (IS_ERR(p_phy->cr_top)) { | |
| dev_err(p_phy->dev, "Failed to get CR_TOP registers: %ld\n", | |
| PTR_ERR(p_phy->cr_top)); | |
| return PTR_ERR(p_phy->cr_top); | |
| } | |
| p_phy->phy_clk = devm_clk_get(p_phy->dev, "usb_phy"); | |
| if (IS_ERR(p_phy->phy_clk)) { | |
| dev_err(p_phy->dev, "Failed to get usb_phy clock: %ld\n", | |
| PTR_ERR(p_phy->phy_clk)); | |
| return PTR_ERR(p_phy->phy_clk); | |
| } | |
| ret = of_property_read_u32(p_phy->dev->of_node, "img,refclk", | |
| &p_phy->refclk); | |
| if (ret < 0) { | |
| dev_err(p_phy->dev, "No reference clock selector specified\n"); | |
| return ret; | |
| } | |
| phy = devm_phy_create(p_phy->dev, NULL, &pistachio_usb_phy_ops); | |
| if (IS_ERR(phy)) { | |
| dev_err(p_phy->dev, "Failed to create PHY: %ld\n", | |
| PTR_ERR(phy)); | |
| return PTR_ERR(phy); | |
| } | |
| phy_set_drvdata(phy, p_phy); | |
| provider = devm_of_phy_provider_register(p_phy->dev, | |
| of_phy_simple_xlate); | |
| if (IS_ERR(provider)) { | |
| dev_err(p_phy->dev, "Failed to register PHY provider: %ld\n", | |
| PTR_ERR(provider)); | |
| return PTR_ERR(provider); | |
| } | |
| return 0; | |
| } | |
| static const struct of_device_id pistachio_usb_phy_of_match[] = { | |
| { .compatible = "img,pistachio-usb-phy", }, | |
| { }, | |
| }; | |
| MODULE_DEVICE_TABLE(of, pistachio_usb_phy_of_match); | |
| static struct platform_driver pistachio_usb_phy_driver = { | |
| .probe = pistachio_usb_phy_probe, | |
| .driver = { | |
| .name = "pistachio-usb-phy", | |
| .of_match_table = pistachio_usb_phy_of_match, | |
| }, | |
| }; | |
| module_platform_driver(pistachio_usb_phy_driver); | |
| MODULE_AUTHOR("Andrew Bresticker <abrestic@chromium.org>"); | |
| MODULE_DESCRIPTION("IMG Pistachio USB2.0 PHY driver"); | |
| MODULE_LICENSE("GPL v2"); |