| // SPDX-License-Identifier: GPL-2.0-only | |
| /* | |
| * Intel La Jolla Cove Adapter USB-SPI driver | |
| * | |
| * Copyright (c) 2023, Intel Corporation. | |
| */ | |
| #include <linux/auxiliary_bus.h> | |
| #include <linux/bitfield.h> | |
| #include <linux/bits.h> | |
| #include <linux/dev_printk.h> | |
| #include <linux/module.h> | |
| #include <linux/spi/spi.h> | |
| #include <linux/usb/ljca.h> | |
| #define LJCA_SPI_BUS_MAX_HZ 48000000 | |
| #define LJCA_SPI_BUF_SIZE 60u | |
| #define LJCA_SPI_MAX_XFER_SIZE \ | |
| (LJCA_SPI_BUF_SIZE - sizeof(struct ljca_spi_xfer_packet)) | |
| #define LJCA_SPI_CLK_MODE_POLARITY BIT(0) | |
| #define LJCA_SPI_CLK_MODE_PHASE BIT(1) | |
| #define LJCA_SPI_XFER_INDICATOR_ID GENMASK(5, 0) | |
| #define LJCA_SPI_XFER_INDICATOR_CMPL BIT(6) | |
| #define LJCA_SPI_XFER_INDICATOR_INDEX BIT(7) | |
| /* SPI commands */ | |
| enum ljca_spi_cmd { | |
| LJCA_SPI_INIT = 1, | |
| LJCA_SPI_READ, | |
| LJCA_SPI_WRITE, | |
| LJCA_SPI_WRITEREAD, | |
| LJCA_SPI_DEINIT, | |
| }; | |
| enum { | |
| LJCA_SPI_BUS_SPEED_24M, | |
| LJCA_SPI_BUS_SPEED_12M, | |
| LJCA_SPI_BUS_SPEED_8M, | |
| LJCA_SPI_BUS_SPEED_6M, | |
| LJCA_SPI_BUS_SPEED_4_8M, /*4.8MHz*/ | |
| LJCA_SPI_BUS_SPEED_MIN = LJCA_SPI_BUS_SPEED_4_8M, | |
| }; | |
| enum { | |
| LJCA_SPI_CLOCK_LOW_POLARITY, | |
| LJCA_SPI_CLOCK_HIGH_POLARITY, | |
| }; | |
| enum { | |
| LJCA_SPI_CLOCK_FIRST_PHASE, | |
| LJCA_SPI_CLOCK_SECOND_PHASE, | |
| }; | |
| struct ljca_spi_init_packet { | |
| u8 index; | |
| u8 speed; | |
| u8 mode; | |
| } __packed; | |
| struct ljca_spi_xfer_packet { | |
| u8 indicator; | |
| u8 len; | |
| u8 data[] __counted_by(len); | |
| } __packed; | |
| struct ljca_spi_dev { | |
| struct ljca_client *ljca; | |
| struct spi_controller *controller; | |
| struct ljca_spi_info *spi_info; | |
| u8 speed; | |
| u8 mode; | |
| u8 obuf[LJCA_SPI_BUF_SIZE]; | |
| u8 ibuf[LJCA_SPI_BUF_SIZE]; | |
| }; | |
| static int ljca_spi_read_write(struct ljca_spi_dev *ljca_spi, const u8 *w_data, | |
| u8 *r_data, int len, int id, int complete, | |
| int cmd) | |
| { | |
| struct ljca_spi_xfer_packet *w_packet = | |
| (struct ljca_spi_xfer_packet *)ljca_spi->obuf; | |
| struct ljca_spi_xfer_packet *r_packet = | |
| (struct ljca_spi_xfer_packet *)ljca_spi->ibuf; | |
| int ret; | |
| w_packet->indicator = FIELD_PREP(LJCA_SPI_XFER_INDICATOR_ID, id) | | |
| FIELD_PREP(LJCA_SPI_XFER_INDICATOR_CMPL, complete) | | |
| FIELD_PREP(LJCA_SPI_XFER_INDICATOR_INDEX, | |
| ljca_spi->spi_info->id); | |
| if (cmd == LJCA_SPI_READ) { | |
| w_packet->len = sizeof(u16); | |
| *(__le16 *)&w_packet->data[0] = cpu_to_le16(len); | |
| } else { | |
| w_packet->len = len; | |
| memcpy(w_packet->data, w_data, len); | |
| } | |
| ret = ljca_transfer(ljca_spi->ljca, cmd, (u8 *)w_packet, | |
| struct_size(w_packet, data, w_packet->len), | |
| (u8 *)r_packet, LJCA_SPI_BUF_SIZE); | |
| if (ret < 0) | |
| return ret; | |
| else if (ret < sizeof(*r_packet) || r_packet->len <= 0) | |
| return -EIO; | |
| if (r_data) | |
| memcpy(r_data, r_packet->data, r_packet->len); | |
| return 0; | |
| } | |
| static int ljca_spi_init(struct ljca_spi_dev *ljca_spi, u8 div, u8 mode) | |
| { | |
| struct ljca_spi_init_packet w_packet = {}; | |
| int ret; | |
| if (ljca_spi->mode == mode && ljca_spi->speed == div) | |
| return 0; | |
| w_packet.index = ljca_spi->spi_info->id; | |
| w_packet.speed = div; | |
| w_packet.mode = FIELD_PREP(LJCA_SPI_CLK_MODE_POLARITY, | |
| (mode & SPI_CPOL) ? LJCA_SPI_CLOCK_HIGH_POLARITY : | |
| LJCA_SPI_CLOCK_LOW_POLARITY) | | |
| FIELD_PREP(LJCA_SPI_CLK_MODE_PHASE, | |
| (mode & SPI_CPHA) ? LJCA_SPI_CLOCK_SECOND_PHASE : | |
| LJCA_SPI_CLOCK_FIRST_PHASE); | |
| ret = ljca_transfer(ljca_spi->ljca, LJCA_SPI_INIT, (u8 *)&w_packet, | |
| sizeof(w_packet), NULL, 0); | |
| if (ret < 0) | |
| return ret; | |
| ljca_spi->mode = mode; | |
| ljca_spi->speed = div; | |
| return 0; | |
| } | |
| static int ljca_spi_deinit(struct ljca_spi_dev *ljca_spi) | |
| { | |
| struct ljca_spi_init_packet w_packet = {}; | |
| int ret; | |
| w_packet.index = ljca_spi->spi_info->id; | |
| ret = ljca_transfer(ljca_spi->ljca, LJCA_SPI_DEINIT, (u8 *)&w_packet, | |
| sizeof(w_packet), NULL, 0); | |
| return ret < 0 ? ret : 0; | |
| } | |
| static inline int ljca_spi_transfer(struct ljca_spi_dev *ljca_spi, | |
| const u8 *tx_data, u8 *rx_data, u16 len) | |
| { | |
| int complete, cur_len; | |
| int remaining = len; | |
| int cmd, ret, i; | |
| int offset = 0; | |
| if (tx_data && rx_data) | |
| cmd = LJCA_SPI_WRITEREAD; | |
| else if (tx_data) | |
| cmd = LJCA_SPI_WRITE; | |
| else if (rx_data) | |
| cmd = LJCA_SPI_READ; | |
| else | |
| return -EINVAL; | |
| for (i = 0; remaining > 0; i++) { | |
| cur_len = min_t(unsigned int, remaining, LJCA_SPI_MAX_XFER_SIZE); | |
| complete = (cur_len == remaining); | |
| ret = ljca_spi_read_write(ljca_spi, | |
| tx_data ? tx_data + offset : NULL, | |
| rx_data ? rx_data + offset : NULL, | |
| cur_len, i, complete, cmd); | |
| if (ret) | |
| return ret; | |
| offset += cur_len; | |
| remaining -= cur_len; | |
| } | |
| return 0; | |
| } | |
| static int ljca_spi_transfer_one(struct spi_controller *controller, | |
| struct spi_device *spi, | |
| struct spi_transfer *xfer) | |
| { | |
| u8 div = DIV_ROUND_UP(controller->max_speed_hz, xfer->speed_hz) / 2 - 1; | |
| struct ljca_spi_dev *ljca_spi = spi_controller_get_devdata(controller); | |
| int ret; | |
| div = min_t(u8, LJCA_SPI_BUS_SPEED_MIN, div); | |
| ret = ljca_spi_init(ljca_spi, div, spi->mode); | |
| if (ret) { | |
| dev_err(&ljca_spi->ljca->auxdev.dev, | |
| "cannot initialize transfer ret %d\n", ret); | |
| return ret; | |
| } | |
| ret = ljca_spi_transfer(ljca_spi, xfer->tx_buf, xfer->rx_buf, xfer->len); | |
| if (ret) | |
| dev_err(&ljca_spi->ljca->auxdev.dev, | |
| "transfer failed len: %d\n", xfer->len); | |
| return ret; | |
| } | |
| static int ljca_spi_probe(struct auxiliary_device *auxdev, | |
| const struct auxiliary_device_id *aux_dev_id) | |
| { | |
| struct ljca_client *ljca = auxiliary_dev_to_ljca_client(auxdev); | |
| struct spi_controller *controller; | |
| struct ljca_spi_dev *ljca_spi; | |
| int ret; | |
| controller = devm_spi_alloc_host(&auxdev->dev, sizeof(*ljca_spi)); | |
| if (!controller) | |
| return -ENOMEM; | |
| ljca_spi = spi_controller_get_devdata(controller); | |
| ljca_spi->ljca = ljca; | |
| ljca_spi->spi_info = dev_get_platdata(&auxdev->dev); | |
| ljca_spi->controller = controller; | |
| controller->bus_num = -1; | |
| controller->mode_bits = SPI_CPHA | SPI_CPOL; | |
| controller->transfer_one = ljca_spi_transfer_one; | |
| controller->auto_runtime_pm = false; | |
| controller->max_speed_hz = LJCA_SPI_BUS_MAX_HZ; | |
| auxiliary_set_drvdata(auxdev, controller); | |
| ret = spi_register_controller(controller); | |
| if (ret) | |
| dev_err(&auxdev->dev, "Failed to register controller\n"); | |
| return ret; | |
| } | |
| static void ljca_spi_dev_remove(struct auxiliary_device *auxdev) | |
| { | |
| struct spi_controller *controller = auxiliary_get_drvdata(auxdev); | |
| struct ljca_spi_dev *ljca_spi = spi_controller_get_devdata(controller); | |
| spi_unregister_controller(controller); | |
| ljca_spi_deinit(ljca_spi); | |
| } | |
| static int ljca_spi_dev_suspend(struct device *dev) | |
| { | |
| struct spi_controller *controller = dev_get_drvdata(dev); | |
| return spi_controller_suspend(controller); | |
| } | |
| static int ljca_spi_dev_resume(struct device *dev) | |
| { | |
| struct spi_controller *controller = dev_get_drvdata(dev); | |
| return spi_controller_resume(controller); | |
| } | |
| static const struct dev_pm_ops ljca_spi_pm = { | |
| SYSTEM_SLEEP_PM_OPS(ljca_spi_dev_suspend, ljca_spi_dev_resume) | |
| }; | |
| static const struct auxiliary_device_id ljca_spi_id_table[] = { | |
| { "usb_ljca.ljca-spi", 0 }, | |
| { /* sentinel */ } | |
| }; | |
| MODULE_DEVICE_TABLE(auxiliary, ljca_spi_id_table); | |
| static struct auxiliary_driver ljca_spi_driver = { | |
| .driver.pm = &ljca_spi_pm, | |
| .probe = ljca_spi_probe, | |
| .remove = ljca_spi_dev_remove, | |
| .id_table = ljca_spi_id_table, | |
| }; | |
| module_auxiliary_driver(ljca_spi_driver); | |
| MODULE_AUTHOR("Wentong Wu"); | |
| MODULE_AUTHOR("Zhifeng Wang <zhifeng.wang@intel.com>"); | |
| MODULE_AUTHOR("Lixu Zhang <lixu.zhang@intel.com>"); | |
| MODULE_DESCRIPTION("Intel La Jolla Cove Adapter USB-SPI driver"); | |
| MODULE_LICENSE("GPL"); | |
| MODULE_IMPORT_NS("LJCA"); |