| /* tmp421.c | |
| * | |
| * Copyright (C) 2009 Andre Prendel <andre.prendel@gmx.de> | |
| * Preliminary support by: | |
| * Melvin Rook, Raymond Ng | |
| * | |
| * This program is free software; you can redistribute it and/or modify | |
| * it under the terms of the GNU General Public License as published by | |
| * the Free Software Foundation; either version 2 of the License, or | |
| * (at your option) any later version. | |
| * | |
| * This program is distributed in the hope that it will be useful, | |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
| * GNU General Public License for more details. | |
| * | |
| * You should have received a copy of the GNU General Public License | |
| * along with this program; if not, write to the Free Software | |
| * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. | |
| */ | |
| /* | |
| * Driver for the Texas Instruments TMP421 SMBus temperature sensor IC. | |
| * Supported models: TMP421, TMP422, TMP423 | |
| */ | |
| #include <linux/module.h> | |
| #include <linux/init.h> | |
| #include <linux/slab.h> | |
| #include <linux/jiffies.h> | |
| #include <linux/i2c.h> | |
| #include <linux/hwmon.h> | |
| #include <linux/hwmon-sysfs.h> | |
| #include <linux/err.h> | |
| #include <linux/mutex.h> | |
| #include <linux/sysfs.h> | |
| /* Addresses to scan */ | |
| static const unsigned short normal_i2c[] = { 0x2a, 0x4c, 0x4d, 0x4e, 0x4f, | |
| I2C_CLIENT_END }; | |
| enum chips { tmp421, tmp422, tmp423 }; | |
| /* The TMP421 registers */ | |
| #define TMP421_CONFIG_REG_1 0x09 | |
| #define TMP421_CONVERSION_RATE_REG 0x0B | |
| #define TMP421_MANUFACTURER_ID_REG 0xFE | |
| #define TMP421_DEVICE_ID_REG 0xFF | |
| static const u8 TMP421_TEMP_MSB[4] = { 0x00, 0x01, 0x02, 0x03 }; | |
| static const u8 TMP421_TEMP_LSB[4] = { 0x10, 0x11, 0x12, 0x13 }; | |
| /* Flags */ | |
| #define TMP421_CONFIG_SHUTDOWN 0x40 | |
| #define TMP421_CONFIG_RANGE 0x04 | |
| /* Manufacturer / Device ID's */ | |
| #define TMP421_MANUFACTURER_ID 0x55 | |
| #define TMP421_DEVICE_ID 0x21 | |
| #define TMP422_DEVICE_ID 0x22 | |
| #define TMP423_DEVICE_ID 0x23 | |
| static const struct i2c_device_id tmp421_id[] = { | |
| { "tmp421", 2 }, | |
| { "tmp422", 3 }, | |
| { "tmp423", 4 }, | |
| { } | |
| }; | |
| MODULE_DEVICE_TABLE(i2c, tmp421_id); | |
| struct tmp421_data { | |
| struct device *hwmon_dev; | |
| struct mutex update_lock; | |
| char valid; | |
| unsigned long last_updated; | |
| int channels; | |
| u8 config; | |
| s16 temp[4]; | |
| }; | |
| static int temp_from_s16(s16 reg) | |
| { | |
| /* Mask out status bits */ | |
| int temp = reg & ~0xf; | |
| return (temp * 1000 + 128) / 256; | |
| } | |
| static int temp_from_u16(u16 reg) | |
| { | |
| /* Mask out status bits */ | |
| int temp = reg & ~0xf; | |
| /* Add offset for extended temperature range. */ | |
| temp -= 64 * 256; | |
| return (temp * 1000 + 128) / 256; | |
| } | |
| static struct tmp421_data *tmp421_update_device(struct device *dev) | |
| { | |
| struct i2c_client *client = to_i2c_client(dev); | |
| struct tmp421_data *data = i2c_get_clientdata(client); | |
| int i; | |
| mutex_lock(&data->update_lock); | |
| if (time_after(jiffies, data->last_updated + 2 * HZ) || !data->valid) { | |
| data->config = i2c_smbus_read_byte_data(client, | |
| TMP421_CONFIG_REG_1); | |
| for (i = 0; i < data->channels; i++) { | |
| data->temp[i] = i2c_smbus_read_byte_data(client, | |
| TMP421_TEMP_MSB[i]) << 8; | |
| data->temp[i] |= i2c_smbus_read_byte_data(client, | |
| TMP421_TEMP_LSB[i]); | |
| } | |
| data->last_updated = jiffies; | |
| data->valid = 1; | |
| } | |
| mutex_unlock(&data->update_lock); | |
| return data; | |
| } | |
| static ssize_t show_temp_value(struct device *dev, | |
| struct device_attribute *devattr, char *buf) | |
| { | |
| int index = to_sensor_dev_attr(devattr)->index; | |
| struct tmp421_data *data = tmp421_update_device(dev); | |
| int temp; | |
| mutex_lock(&data->update_lock); | |
| if (data->config & TMP421_CONFIG_RANGE) | |
| temp = temp_from_u16(data->temp[index]); | |
| else | |
| temp = temp_from_s16(data->temp[index]); | |
| mutex_unlock(&data->update_lock); | |
| return sprintf(buf, "%d\n", temp); | |
| } | |
| static ssize_t show_fault(struct device *dev, | |
| struct device_attribute *devattr, char *buf) | |
| { | |
| int index = to_sensor_dev_attr(devattr)->index; | |
| struct tmp421_data *data = tmp421_update_device(dev); | |
| /* | |
| * The OPEN bit signals a fault. This is bit 0 of the temperature | |
| * register (low byte). | |
| */ | |
| if (data->temp[index] & 0x01) | |
| return sprintf(buf, "1\n"); | |
| else | |
| return sprintf(buf, "0\n"); | |
| } | |
| static umode_t tmp421_is_visible(struct kobject *kobj, struct attribute *a, | |
| int n) | |
| { | |
| struct device *dev = container_of(kobj, struct device, kobj); | |
| struct tmp421_data *data = dev_get_drvdata(dev); | |
| struct device_attribute *devattr; | |
| unsigned int index; | |
| devattr = container_of(a, struct device_attribute, attr); | |
| index = to_sensor_dev_attr(devattr)->index; | |
| if (index < data->channels) | |
| return a->mode; | |
| return 0; | |
| } | |
| static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, show_temp_value, NULL, 0); | |
| static SENSOR_DEVICE_ATTR(temp2_input, S_IRUGO, show_temp_value, NULL, 1); | |
| static SENSOR_DEVICE_ATTR(temp2_fault, S_IRUGO, show_fault, NULL, 1); | |
| static SENSOR_DEVICE_ATTR(temp3_input, S_IRUGO, show_temp_value, NULL, 2); | |
| static SENSOR_DEVICE_ATTR(temp3_fault, S_IRUGO, show_fault, NULL, 2); | |
| static SENSOR_DEVICE_ATTR(temp4_input, S_IRUGO, show_temp_value, NULL, 3); | |
| static SENSOR_DEVICE_ATTR(temp4_fault, S_IRUGO, show_fault, NULL, 3); | |
| static struct attribute *tmp421_attr[] = { | |
| &sensor_dev_attr_temp1_input.dev_attr.attr, | |
| &sensor_dev_attr_temp2_input.dev_attr.attr, | |
| &sensor_dev_attr_temp2_fault.dev_attr.attr, | |
| &sensor_dev_attr_temp3_input.dev_attr.attr, | |
| &sensor_dev_attr_temp3_fault.dev_attr.attr, | |
| &sensor_dev_attr_temp4_input.dev_attr.attr, | |
| &sensor_dev_attr_temp4_fault.dev_attr.attr, | |
| NULL | |
| }; | |
| static const struct attribute_group tmp421_group = { | |
| .attrs = tmp421_attr, | |
| .is_visible = tmp421_is_visible, | |
| }; | |
| static int tmp421_init_client(struct i2c_client *client) | |
| { | |
| int config, config_orig; | |
| /* Set the conversion rate to 2 Hz */ | |
| i2c_smbus_write_byte_data(client, TMP421_CONVERSION_RATE_REG, 0x05); | |
| /* Start conversions (disable shutdown if necessary) */ | |
| config = i2c_smbus_read_byte_data(client, TMP421_CONFIG_REG_1); | |
| if (config < 0) { | |
| dev_err(&client->dev, | |
| "Could not read configuration register (%d)\n", config); | |
| return config; | |
| } | |
| config_orig = config; | |
| config &= ~TMP421_CONFIG_SHUTDOWN; | |
| if (config != config_orig) { | |
| dev_info(&client->dev, "Enable monitoring chip\n"); | |
| i2c_smbus_write_byte_data(client, TMP421_CONFIG_REG_1, config); | |
| } | |
| return 0; | |
| } | |
| static int tmp421_detect(struct i2c_client *client, | |
| struct i2c_board_info *info) | |
| { | |
| enum chips kind; | |
| struct i2c_adapter *adapter = client->adapter; | |
| const char *names[] = { "TMP421", "TMP422", "TMP423" }; | |
| u8 reg; | |
| if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) | |
| return -ENODEV; | |
| reg = i2c_smbus_read_byte_data(client, TMP421_MANUFACTURER_ID_REG); | |
| if (reg != TMP421_MANUFACTURER_ID) | |
| return -ENODEV; | |
| reg = i2c_smbus_read_byte_data(client, TMP421_DEVICE_ID_REG); | |
| switch (reg) { | |
| case TMP421_DEVICE_ID: | |
| kind = tmp421; | |
| break; | |
| case TMP422_DEVICE_ID: | |
| kind = tmp422; | |
| break; | |
| case TMP423_DEVICE_ID: | |
| kind = tmp423; | |
| break; | |
| default: | |
| return -ENODEV; | |
| } | |
| strlcpy(info->type, tmp421_id[kind].name, I2C_NAME_SIZE); | |
| dev_info(&adapter->dev, "Detected TI %s chip at 0x%02x\n", | |
| names[kind], client->addr); | |
| return 0; | |
| } | |
| static int tmp421_probe(struct i2c_client *client, | |
| const struct i2c_device_id *id) | |
| { | |
| struct tmp421_data *data; | |
| int err; | |
| data = devm_kzalloc(&client->dev, sizeof(struct tmp421_data), | |
| GFP_KERNEL); | |
| if (!data) | |
| return -ENOMEM; | |
| i2c_set_clientdata(client, data); | |
| mutex_init(&data->update_lock); | |
| data->channels = id->driver_data; | |
| err = tmp421_init_client(client); | |
| if (err) | |
| return err; | |
| err = sysfs_create_group(&client->dev.kobj, &tmp421_group); | |
| if (err) | |
| return err; | |
| data->hwmon_dev = hwmon_device_register(&client->dev); | |
| if (IS_ERR(data->hwmon_dev)) { | |
| err = PTR_ERR(data->hwmon_dev); | |
| data->hwmon_dev = NULL; | |
| goto exit_remove; | |
| } | |
| return 0; | |
| exit_remove: | |
| sysfs_remove_group(&client->dev.kobj, &tmp421_group); | |
| return err; | |
| } | |
| static int tmp421_remove(struct i2c_client *client) | |
| { | |
| struct tmp421_data *data = i2c_get_clientdata(client); | |
| hwmon_device_unregister(data->hwmon_dev); | |
| sysfs_remove_group(&client->dev.kobj, &tmp421_group); | |
| return 0; | |
| } | |
| static struct i2c_driver tmp421_driver = { | |
| .class = I2C_CLASS_HWMON, | |
| .driver = { | |
| .name = "tmp421", | |
| }, | |
| .probe = tmp421_probe, | |
| .remove = tmp421_remove, | |
| .id_table = tmp421_id, | |
| .detect = tmp421_detect, | |
| .address_list = normal_i2c, | |
| }; | |
| module_i2c_driver(tmp421_driver); | |
| MODULE_AUTHOR("Andre Prendel <andre.prendel@gmx.de>"); | |
| MODULE_DESCRIPTION("Texas Instruments TMP421/422/423 temperature sensor driver"); | |
| MODULE_LICENSE("GPL"); |