| // SPDX-License-Identifier: GPL-2.0-only | 
 | /* The industrial I/O core | 
 |  * | 
 |  * Copyright (c) 2008 Jonathan Cameron | 
 |  * | 
 |  * Handling of buffer allocation / resizing. | 
 |  * | 
 |  * Things to look at here. | 
 |  * - Better memory allocation techniques? | 
 |  * - Alternative access techniques? | 
 |  */ | 
 | #include <linux/atomic.h> | 
 | #include <linux/anon_inodes.h> | 
 | #include <linux/cleanup.h> | 
 | #include <linux/kernel.h> | 
 | #include <linux/export.h> | 
 | #include <linux/device.h> | 
 | #include <linux/dma-buf.h> | 
 | #include <linux/dma-fence.h> | 
 | #include <linux/dma-resv.h> | 
 | #include <linux/file.h> | 
 | #include <linux/fs.h> | 
 | #include <linux/cdev.h> | 
 | #include <linux/slab.h> | 
 | #include <linux/mm.h> | 
 | #include <linux/poll.h> | 
 | #include <linux/sched/signal.h> | 
 |  | 
 | #include <linux/iio/iio.h> | 
 | #include <linux/iio/iio-opaque.h> | 
 | #include "iio_core.h" | 
 | #include "iio_core_trigger.h" | 
 | #include <linux/iio/sysfs.h> | 
 | #include <linux/iio/buffer.h> | 
 | #include <linux/iio/buffer_impl.h> | 
 |  | 
 | #define DMABUF_ENQUEUE_TIMEOUT_MS 5000 | 
 |  | 
 | MODULE_IMPORT_NS(DMA_BUF); | 
 |  | 
 | struct iio_dmabuf_priv { | 
 | 	struct list_head entry; | 
 | 	struct kref ref; | 
 |  | 
 | 	struct iio_buffer *buffer; | 
 | 	struct iio_dma_buffer_block *block; | 
 |  | 
 | 	u64 context; | 
 |  | 
 | 	/* Spinlock used for locking the dma_fence */ | 
 | 	spinlock_t lock; | 
 |  | 
 | 	struct dma_buf_attachment *attach; | 
 | 	struct sg_table *sgt; | 
 | 	enum dma_data_direction dir; | 
 | 	atomic_t seqno; | 
 | }; | 
 |  | 
 | struct iio_dma_fence { | 
 | 	struct dma_fence base; | 
 | 	struct iio_dmabuf_priv *priv; | 
 | 	struct work_struct work; | 
 | }; | 
 |  | 
 | static const char * const iio_endian_prefix[] = { | 
 | 	[IIO_BE] = "be", | 
 | 	[IIO_LE] = "le", | 
 | }; | 
 |  | 
 | static bool iio_buffer_is_active(struct iio_buffer *buf) | 
 | { | 
 | 	return !list_empty(&buf->buffer_list); | 
 | } | 
 |  | 
 | static size_t iio_buffer_data_available(struct iio_buffer *buf) | 
 | { | 
 | 	return buf->access->data_available(buf); | 
 | } | 
 |  | 
 | static int iio_buffer_flush_hwfifo(struct iio_dev *indio_dev, | 
 | 				   struct iio_buffer *buf, size_t required) | 
 | { | 
 | 	if (!indio_dev->info->hwfifo_flush_to_buffer) | 
 | 		return -ENODEV; | 
 |  | 
 | 	return indio_dev->info->hwfifo_flush_to_buffer(indio_dev, required); | 
 | } | 
 |  | 
 | static bool iio_buffer_ready(struct iio_dev *indio_dev, struct iio_buffer *buf, | 
 | 			     size_t to_wait, int to_flush) | 
 | { | 
 | 	size_t avail; | 
 | 	int flushed = 0; | 
 |  | 
 | 	/* wakeup if the device was unregistered */ | 
 | 	if (!indio_dev->info) | 
 | 		return true; | 
 |  | 
 | 	/* drain the buffer if it was disabled */ | 
 | 	if (!iio_buffer_is_active(buf)) { | 
 | 		to_wait = min_t(size_t, to_wait, 1); | 
 | 		to_flush = 0; | 
 | 	} | 
 |  | 
 | 	avail = iio_buffer_data_available(buf); | 
 |  | 
 | 	if (avail >= to_wait) { | 
 | 		/* force a flush for non-blocking reads */ | 
 | 		if (!to_wait && avail < to_flush) | 
 | 			iio_buffer_flush_hwfifo(indio_dev, buf, | 
 | 						to_flush - avail); | 
 | 		return true; | 
 | 	} | 
 |  | 
 | 	if (to_flush) | 
 | 		flushed = iio_buffer_flush_hwfifo(indio_dev, buf, | 
 | 						  to_wait - avail); | 
 | 	if (flushed <= 0) | 
 | 		return false; | 
 |  | 
 | 	if (avail + flushed >= to_wait) | 
 | 		return true; | 
 |  | 
 | 	return false; | 
 | } | 
 |  | 
 | /** | 
 |  * iio_buffer_read() - chrdev read for buffer access | 
 |  * @filp:	File structure pointer for the char device | 
 |  * @buf:	Destination buffer for iio buffer read | 
 |  * @n:		First n bytes to read | 
 |  * @f_ps:	Long offset provided by the user as a seek position | 
 |  * | 
 |  * This function relies on all buffer implementations having an | 
 |  * iio_buffer as their first element. | 
 |  * | 
 |  * Return: negative values corresponding to error codes or ret != 0 | 
 |  *	   for ending the reading activity | 
 |  **/ | 
 | static ssize_t iio_buffer_read(struct file *filp, char __user *buf, | 
 | 			       size_t n, loff_t *f_ps) | 
 | { | 
 | 	struct iio_dev_buffer_pair *ib = filp->private_data; | 
 | 	struct iio_buffer *rb = ib->buffer; | 
 | 	struct iio_dev *indio_dev = ib->indio_dev; | 
 | 	DEFINE_WAIT_FUNC(wait, woken_wake_function); | 
 | 	size_t datum_size; | 
 | 	size_t to_wait; | 
 | 	int ret = 0; | 
 |  | 
 | 	if (!indio_dev->info) | 
 | 		return -ENODEV; | 
 |  | 
 | 	if (!rb || !rb->access->read) | 
 | 		return -EINVAL; | 
 |  | 
 | 	if (rb->direction != IIO_BUFFER_DIRECTION_IN) | 
 | 		return -EPERM; | 
 |  | 
 | 	datum_size = rb->bytes_per_datum; | 
 |  | 
 | 	/* | 
 | 	 * If datum_size is 0 there will never be anything to read from the | 
 | 	 * buffer, so signal end of file now. | 
 | 	 */ | 
 | 	if (!datum_size) | 
 | 		return 0; | 
 |  | 
 | 	if (filp->f_flags & O_NONBLOCK) | 
 | 		to_wait = 0; | 
 | 	else | 
 | 		to_wait = min_t(size_t, n / datum_size, rb->watermark); | 
 |  | 
 | 	add_wait_queue(&rb->pollq, &wait); | 
 | 	do { | 
 | 		if (!indio_dev->info) { | 
 | 			ret = -ENODEV; | 
 | 			break; | 
 | 		} | 
 |  | 
 | 		if (!iio_buffer_ready(indio_dev, rb, to_wait, n / datum_size)) { | 
 | 			if (signal_pending(current)) { | 
 | 				ret = -ERESTARTSYS; | 
 | 				break; | 
 | 			} | 
 |  | 
 | 			wait_woken(&wait, TASK_INTERRUPTIBLE, | 
 | 				   MAX_SCHEDULE_TIMEOUT); | 
 | 			continue; | 
 | 		} | 
 |  | 
 | 		ret = rb->access->read(rb, n, buf); | 
 | 		if (ret == 0 && (filp->f_flags & O_NONBLOCK)) | 
 | 			ret = -EAGAIN; | 
 | 	} while (ret == 0); | 
 | 	remove_wait_queue(&rb->pollq, &wait); | 
 |  | 
 | 	return ret; | 
 | } | 
 |  | 
 | static size_t iio_buffer_space_available(struct iio_buffer *buf) | 
 | { | 
 | 	if (buf->access->space_available) | 
 | 		return buf->access->space_available(buf); | 
 |  | 
 | 	return SIZE_MAX; | 
 | } | 
 |  | 
 | static ssize_t iio_buffer_write(struct file *filp, const char __user *buf, | 
 | 				size_t n, loff_t *f_ps) | 
 | { | 
 | 	struct iio_dev_buffer_pair *ib = filp->private_data; | 
 | 	struct iio_buffer *rb = ib->buffer; | 
 | 	struct iio_dev *indio_dev = ib->indio_dev; | 
 | 	DEFINE_WAIT_FUNC(wait, woken_wake_function); | 
 | 	int ret = 0; | 
 | 	size_t written; | 
 |  | 
 | 	if (!indio_dev->info) | 
 | 		return -ENODEV; | 
 |  | 
 | 	if (!rb || !rb->access->write) | 
 | 		return -EINVAL; | 
 |  | 
 | 	if (rb->direction != IIO_BUFFER_DIRECTION_OUT) | 
 | 		return -EPERM; | 
 |  | 
 | 	written = 0; | 
 | 	add_wait_queue(&rb->pollq, &wait); | 
 | 	do { | 
 | 		if (!indio_dev->info) | 
 | 			return -ENODEV; | 
 |  | 
 | 		if (!iio_buffer_space_available(rb)) { | 
 | 			if (signal_pending(current)) { | 
 | 				ret = -ERESTARTSYS; | 
 | 				break; | 
 | 			} | 
 |  | 
 | 			if (filp->f_flags & O_NONBLOCK) { | 
 | 				if (!written) | 
 | 					ret = -EAGAIN; | 
 | 				break; | 
 | 			} | 
 |  | 
 | 			wait_woken(&wait, TASK_INTERRUPTIBLE, | 
 | 				   MAX_SCHEDULE_TIMEOUT); | 
 | 			continue; | 
 | 		} | 
 |  | 
 | 		ret = rb->access->write(rb, n - written, buf + written); | 
 | 		if (ret < 0) | 
 | 			break; | 
 |  | 
 | 		written += ret; | 
 |  | 
 | 	} while (written != n); | 
 | 	remove_wait_queue(&rb->pollq, &wait); | 
 |  | 
 | 	return ret < 0 ? ret : written; | 
 | } | 
 |  | 
 | /** | 
 |  * iio_buffer_poll() - poll the buffer to find out if it has data | 
 |  * @filp:	File structure pointer for device access | 
 |  * @wait:	Poll table structure pointer for which the driver adds | 
 |  *		a wait queue | 
 |  * | 
 |  * Return: (EPOLLIN | EPOLLRDNORM) if data is available for reading | 
 |  *	   or 0 for other cases | 
 |  */ | 
 | static __poll_t iio_buffer_poll(struct file *filp, | 
 | 				struct poll_table_struct *wait) | 
 | { | 
 | 	struct iio_dev_buffer_pair *ib = filp->private_data; | 
 | 	struct iio_buffer *rb = ib->buffer; | 
 | 	struct iio_dev *indio_dev = ib->indio_dev; | 
 |  | 
 | 	if (!indio_dev->info || !rb) | 
 | 		return 0; | 
 |  | 
 | 	poll_wait(filp, &rb->pollq, wait); | 
 |  | 
 | 	switch (rb->direction) { | 
 | 	case IIO_BUFFER_DIRECTION_IN: | 
 | 		if (iio_buffer_ready(indio_dev, rb, rb->watermark, 0)) | 
 | 			return EPOLLIN | EPOLLRDNORM; | 
 | 		break; | 
 | 	case IIO_BUFFER_DIRECTION_OUT: | 
 | 		if (iio_buffer_space_available(rb)) | 
 | 			return EPOLLOUT | EPOLLWRNORM; | 
 | 		break; | 
 | 	} | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | ssize_t iio_buffer_read_wrapper(struct file *filp, char __user *buf, | 
 | 				size_t n, loff_t *f_ps) | 
 | { | 
 | 	struct iio_dev_buffer_pair *ib = filp->private_data; | 
 | 	struct iio_buffer *rb = ib->buffer; | 
 |  | 
 | 	/* check if buffer was opened through new API */ | 
 | 	if (test_bit(IIO_BUSY_BIT_POS, &rb->flags)) | 
 | 		return -EBUSY; | 
 |  | 
 | 	return iio_buffer_read(filp, buf, n, f_ps); | 
 | } | 
 |  | 
 | ssize_t iio_buffer_write_wrapper(struct file *filp, const char __user *buf, | 
 | 				 size_t n, loff_t *f_ps) | 
 | { | 
 | 	struct iio_dev_buffer_pair *ib = filp->private_data; | 
 | 	struct iio_buffer *rb = ib->buffer; | 
 |  | 
 | 	/* check if buffer was opened through new API */ | 
 | 	if (test_bit(IIO_BUSY_BIT_POS, &rb->flags)) | 
 | 		return -EBUSY; | 
 |  | 
 | 	return iio_buffer_write(filp, buf, n, f_ps); | 
 | } | 
 |  | 
 | __poll_t iio_buffer_poll_wrapper(struct file *filp, | 
 | 				 struct poll_table_struct *wait) | 
 | { | 
 | 	struct iio_dev_buffer_pair *ib = filp->private_data; | 
 | 	struct iio_buffer *rb = ib->buffer; | 
 |  | 
 | 	/* check if buffer was opened through new API */ | 
 | 	if (test_bit(IIO_BUSY_BIT_POS, &rb->flags)) | 
 | 		return 0; | 
 |  | 
 | 	return iio_buffer_poll(filp, wait); | 
 | } | 
 |  | 
 | /** | 
 |  * iio_buffer_wakeup_poll - Wakes up the buffer waitqueue | 
 |  * @indio_dev: The IIO device | 
 |  * | 
 |  * Wakes up the event waitqueue used for poll(). Should usually | 
 |  * be called when the device is unregistered. | 
 |  */ | 
 | void iio_buffer_wakeup_poll(struct iio_dev *indio_dev) | 
 | { | 
 | 	struct iio_dev_opaque *iio_dev_opaque = to_iio_dev_opaque(indio_dev); | 
 | 	struct iio_buffer *buffer; | 
 | 	unsigned int i; | 
 |  | 
 | 	for (i = 0; i < iio_dev_opaque->attached_buffers_cnt; i++) { | 
 | 		buffer = iio_dev_opaque->attached_buffers[i]; | 
 | 		wake_up(&buffer->pollq); | 
 | 	} | 
 | } | 
 |  | 
 | int iio_pop_from_buffer(struct iio_buffer *buffer, void *data) | 
 | { | 
 | 	if (!buffer || !buffer->access || !buffer->access->remove_from) | 
 | 		return -EINVAL; | 
 |  | 
 | 	return buffer->access->remove_from(buffer, data); | 
 | } | 
 | EXPORT_SYMBOL_GPL(iio_pop_from_buffer); | 
 |  | 
 | void iio_buffer_init(struct iio_buffer *buffer) | 
 | { | 
 | 	INIT_LIST_HEAD(&buffer->demux_list); | 
 | 	INIT_LIST_HEAD(&buffer->buffer_list); | 
 | 	INIT_LIST_HEAD(&buffer->dmabufs); | 
 | 	mutex_init(&buffer->dmabufs_mutex); | 
 | 	init_waitqueue_head(&buffer->pollq); | 
 | 	kref_init(&buffer->ref); | 
 | 	if (!buffer->watermark) | 
 | 		buffer->watermark = 1; | 
 | } | 
 | EXPORT_SYMBOL(iio_buffer_init); | 
 |  | 
 | void iio_device_detach_buffers(struct iio_dev *indio_dev) | 
 | { | 
 | 	struct iio_dev_opaque *iio_dev_opaque = to_iio_dev_opaque(indio_dev); | 
 | 	struct iio_buffer *buffer; | 
 | 	unsigned int i; | 
 |  | 
 | 	for (i = 0; i < iio_dev_opaque->attached_buffers_cnt; i++) { | 
 | 		buffer = iio_dev_opaque->attached_buffers[i]; | 
 | 		iio_buffer_put(buffer); | 
 | 	} | 
 |  | 
 | 	kfree(iio_dev_opaque->attached_buffers); | 
 | } | 
 |  | 
 | static ssize_t iio_show_scan_index(struct device *dev, | 
 | 				   struct device_attribute *attr, | 
 | 				   char *buf) | 
 | { | 
 | 	return sysfs_emit(buf, "%u\n", to_iio_dev_attr(attr)->c->scan_index); | 
 | } | 
 |  | 
 | static ssize_t iio_show_fixed_type(struct device *dev, | 
 | 				   struct device_attribute *attr, | 
 | 				   char *buf) | 
 | { | 
 | 	struct iio_dev *indio_dev = dev_to_iio_dev(dev); | 
 | 	struct iio_dev_attr *this_attr = to_iio_dev_attr(attr); | 
 | 	const struct iio_scan_type *scan_type; | 
 | 	u8 type; | 
 |  | 
 | 	scan_type = iio_get_current_scan_type(indio_dev, this_attr->c); | 
 | 	if (IS_ERR(scan_type)) | 
 | 		return PTR_ERR(scan_type); | 
 |  | 
 | 	type = scan_type->endianness; | 
 |  | 
 | 	if (type == IIO_CPU) { | 
 | #ifdef __LITTLE_ENDIAN | 
 | 		type = IIO_LE; | 
 | #else | 
 | 		type = IIO_BE; | 
 | #endif | 
 | 	} | 
 | 	if (scan_type->repeat > 1) | 
 | 		return sysfs_emit(buf, "%s:%c%d/%dX%d>>%u\n", | 
 | 		       iio_endian_prefix[type], | 
 | 		       scan_type->sign, | 
 | 		       scan_type->realbits, | 
 | 		       scan_type->storagebits, | 
 | 		       scan_type->repeat, | 
 | 		       scan_type->shift); | 
 | 	else | 
 | 		return sysfs_emit(buf, "%s:%c%d/%d>>%u\n", | 
 | 		       iio_endian_prefix[type], | 
 | 		       scan_type->sign, | 
 | 		       scan_type->realbits, | 
 | 		       scan_type->storagebits, | 
 | 		       scan_type->shift); | 
 | } | 
 |  | 
 | static ssize_t iio_scan_el_show(struct device *dev, | 
 | 				struct device_attribute *attr, | 
 | 				char *buf) | 
 | { | 
 | 	int ret; | 
 | 	struct iio_buffer *buffer = to_iio_dev_attr(attr)->buffer; | 
 |  | 
 | 	/* Ensure ret is 0 or 1. */ | 
 | 	ret = !!test_bit(to_iio_dev_attr(attr)->address, | 
 | 		       buffer->scan_mask); | 
 |  | 
 | 	return sysfs_emit(buf, "%d\n", ret); | 
 | } | 
 |  | 
 | /* Note NULL used as error indicator as it doesn't make sense. */ | 
 | static const unsigned long *iio_scan_mask_match(const unsigned long *av_masks, | 
 | 						unsigned int masklength, | 
 | 						const unsigned long *mask, | 
 | 						bool strict) | 
 | { | 
 | 	if (bitmap_empty(mask, masklength)) | 
 | 		return NULL; | 
 | 	/* | 
 | 	 * The condition here do not handle multi-long masks correctly. | 
 | 	 * It only checks the first long to be zero, and will use such mask | 
 | 	 * as a terminator even if there was bits set after the first long. | 
 | 	 * | 
 | 	 * Correct check would require using: | 
 | 	 * while (!bitmap_empty(av_masks, masklength)) | 
 | 	 * instead. This is potentially hazardous because the | 
 | 	 * avaliable_scan_masks is a zero terminated array of longs - and | 
 | 	 * using the proper bitmap_empty() check for multi-long wide masks | 
 | 	 * would require the array to be terminated with multiple zero longs - | 
 | 	 * which is not such an usual pattern. | 
 | 	 * | 
 | 	 * As writing of this no multi-long wide masks were found in-tree, so | 
 | 	 * the simple while (*av_masks) check is working. | 
 | 	 */ | 
 | 	while (*av_masks) { | 
 | 		if (strict) { | 
 | 			if (bitmap_equal(mask, av_masks, masklength)) | 
 | 				return av_masks; | 
 | 		} else { | 
 | 			if (bitmap_subset(mask, av_masks, masklength)) | 
 | 				return av_masks; | 
 | 		} | 
 | 		av_masks += BITS_TO_LONGS(masklength); | 
 | 	} | 
 | 	return NULL; | 
 | } | 
 |  | 
 | static bool iio_validate_scan_mask(struct iio_dev *indio_dev, | 
 | 				   const unsigned long *mask) | 
 | { | 
 | 	if (!indio_dev->setup_ops->validate_scan_mask) | 
 | 		return true; | 
 |  | 
 | 	return indio_dev->setup_ops->validate_scan_mask(indio_dev, mask); | 
 | } | 
 |  | 
 | /** | 
 |  * iio_scan_mask_set() - set particular bit in the scan mask | 
 |  * @indio_dev: the iio device | 
 |  * @buffer: the buffer whose scan mask we are interested in | 
 |  * @bit: the bit to be set. | 
 |  * | 
 |  * Note that at this point we have no way of knowing what other | 
 |  * buffers might request, hence this code only verifies that the | 
 |  * individual buffers request is plausible. | 
 |  */ | 
 | static int iio_scan_mask_set(struct iio_dev *indio_dev, | 
 | 			     struct iio_buffer *buffer, int bit) | 
 | { | 
 | 	const unsigned long *mask; | 
 | 	unsigned long *trialmask; | 
 |  | 
 | 	if (!indio_dev->masklength) { | 
 | 		WARN(1, "Trying to set scanmask prior to registering buffer\n"); | 
 | 		return -EINVAL; | 
 | 	} | 
 |  | 
 | 	trialmask = bitmap_alloc(indio_dev->masklength, GFP_KERNEL); | 
 | 	if (!trialmask) | 
 | 		return -ENOMEM; | 
 | 	bitmap_copy(trialmask, buffer->scan_mask, indio_dev->masklength); | 
 | 	set_bit(bit, trialmask); | 
 |  | 
 | 	if (!iio_validate_scan_mask(indio_dev, trialmask)) | 
 | 		goto err_invalid_mask; | 
 |  | 
 | 	if (indio_dev->available_scan_masks) { | 
 | 		mask = iio_scan_mask_match(indio_dev->available_scan_masks, | 
 | 					   indio_dev->masklength, | 
 | 					   trialmask, false); | 
 | 		if (!mask) | 
 | 			goto err_invalid_mask; | 
 | 	} | 
 | 	bitmap_copy(buffer->scan_mask, trialmask, indio_dev->masklength); | 
 |  | 
 | 	bitmap_free(trialmask); | 
 |  | 
 | 	return 0; | 
 |  | 
 | err_invalid_mask: | 
 | 	bitmap_free(trialmask); | 
 | 	return -EINVAL; | 
 | } | 
 |  | 
 | static int iio_scan_mask_clear(struct iio_buffer *buffer, int bit) | 
 | { | 
 | 	clear_bit(bit, buffer->scan_mask); | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int iio_scan_mask_query(struct iio_dev *indio_dev, | 
 | 			       struct iio_buffer *buffer, int bit) | 
 | { | 
 | 	if (bit > indio_dev->masklength) | 
 | 		return -EINVAL; | 
 |  | 
 | 	if (!buffer->scan_mask) | 
 | 		return 0; | 
 |  | 
 | 	/* Ensure return value is 0 or 1. */ | 
 | 	return !!test_bit(bit, buffer->scan_mask); | 
 | }; | 
 |  | 
 | static ssize_t iio_scan_el_store(struct device *dev, | 
 | 				 struct device_attribute *attr, | 
 | 				 const char *buf, | 
 | 				 size_t len) | 
 | { | 
 | 	int ret; | 
 | 	bool state; | 
 | 	struct iio_dev *indio_dev = dev_to_iio_dev(dev); | 
 | 	struct iio_dev_opaque *iio_dev_opaque = to_iio_dev_opaque(indio_dev); | 
 | 	struct iio_dev_attr *this_attr = to_iio_dev_attr(attr); | 
 | 	struct iio_buffer *buffer = this_attr->buffer; | 
 |  | 
 | 	ret = kstrtobool(buf, &state); | 
 | 	if (ret < 0) | 
 | 		return ret; | 
 |  | 
 | 	guard(mutex)(&iio_dev_opaque->mlock); | 
 | 	if (iio_buffer_is_active(buffer)) | 
 | 		return -EBUSY; | 
 |  | 
 | 	ret = iio_scan_mask_query(indio_dev, buffer, this_attr->address); | 
 | 	if (ret < 0) | 
 | 		return ret; | 
 |  | 
 | 	if (state && ret) | 
 | 		return len; | 
 |  | 
 | 	if (state) | 
 | 		ret = iio_scan_mask_set(indio_dev, buffer, this_attr->address); | 
 | 	else | 
 | 		ret = iio_scan_mask_clear(buffer, this_attr->address); | 
 | 	if (ret) | 
 | 		return ret; | 
 |  | 
 | 	return len; | 
 | } | 
 |  | 
 | static ssize_t iio_scan_el_ts_show(struct device *dev, | 
 | 				   struct device_attribute *attr, | 
 | 				   char *buf) | 
 | { | 
 | 	struct iio_buffer *buffer = to_iio_dev_attr(attr)->buffer; | 
 |  | 
 | 	return sysfs_emit(buf, "%d\n", buffer->scan_timestamp); | 
 | } | 
 |  | 
 | static ssize_t iio_scan_el_ts_store(struct device *dev, | 
 | 				    struct device_attribute *attr, | 
 | 				    const char *buf, | 
 | 				    size_t len) | 
 | { | 
 | 	int ret; | 
 | 	struct iio_dev *indio_dev = dev_to_iio_dev(dev); | 
 | 	struct iio_dev_opaque *iio_dev_opaque = to_iio_dev_opaque(indio_dev); | 
 | 	struct iio_buffer *buffer = to_iio_dev_attr(attr)->buffer; | 
 | 	bool state; | 
 |  | 
 | 	ret = kstrtobool(buf, &state); | 
 | 	if (ret < 0) | 
 | 		return ret; | 
 |  | 
 | 	guard(mutex)(&iio_dev_opaque->mlock); | 
 | 	if (iio_buffer_is_active(buffer)) | 
 | 		return -EBUSY; | 
 |  | 
 | 	buffer->scan_timestamp = state; | 
 |  | 
 | 	return len; | 
 | } | 
 |  | 
 | static int iio_buffer_add_channel_sysfs(struct iio_dev *indio_dev, | 
 | 					struct iio_buffer *buffer, | 
 | 					const struct iio_chan_spec *chan) | 
 | { | 
 | 	int ret, attrcount = 0; | 
 |  | 
 | 	ret = __iio_add_chan_devattr("index", | 
 | 				     chan, | 
 | 				     &iio_show_scan_index, | 
 | 				     NULL, | 
 | 				     0, | 
 | 				     IIO_SEPARATE, | 
 | 				     &indio_dev->dev, | 
 | 				     buffer, | 
 | 				     &buffer->buffer_attr_list); | 
 | 	if (ret) | 
 | 		return ret; | 
 | 	attrcount++; | 
 | 	ret = __iio_add_chan_devattr("type", | 
 | 				     chan, | 
 | 				     &iio_show_fixed_type, | 
 | 				     NULL, | 
 | 				     0, | 
 | 				     IIO_SEPARATE, | 
 | 				     &indio_dev->dev, | 
 | 				     buffer, | 
 | 				     &buffer->buffer_attr_list); | 
 | 	if (ret) | 
 | 		return ret; | 
 | 	attrcount++; | 
 | 	if (chan->type != IIO_TIMESTAMP) | 
 | 		ret = __iio_add_chan_devattr("en", | 
 | 					     chan, | 
 | 					     &iio_scan_el_show, | 
 | 					     &iio_scan_el_store, | 
 | 					     chan->scan_index, | 
 | 					     IIO_SEPARATE, | 
 | 					     &indio_dev->dev, | 
 | 					     buffer, | 
 | 					     &buffer->buffer_attr_list); | 
 | 	else | 
 | 		ret = __iio_add_chan_devattr("en", | 
 | 					     chan, | 
 | 					     &iio_scan_el_ts_show, | 
 | 					     &iio_scan_el_ts_store, | 
 | 					     chan->scan_index, | 
 | 					     IIO_SEPARATE, | 
 | 					     &indio_dev->dev, | 
 | 					     buffer, | 
 | 					     &buffer->buffer_attr_list); | 
 | 	if (ret) | 
 | 		return ret; | 
 | 	attrcount++; | 
 | 	ret = attrcount; | 
 | 	return ret; | 
 | } | 
 |  | 
 | static ssize_t length_show(struct device *dev, struct device_attribute *attr, | 
 | 			   char *buf) | 
 | { | 
 | 	struct iio_buffer *buffer = to_iio_dev_attr(attr)->buffer; | 
 |  | 
 | 	return sysfs_emit(buf, "%d\n", buffer->length); | 
 | } | 
 |  | 
 | static ssize_t length_store(struct device *dev, struct device_attribute *attr, | 
 | 			    const char *buf, size_t len) | 
 | { | 
 | 	struct iio_dev *indio_dev = dev_to_iio_dev(dev); | 
 | 	struct iio_dev_opaque *iio_dev_opaque = to_iio_dev_opaque(indio_dev); | 
 | 	struct iio_buffer *buffer = to_iio_dev_attr(attr)->buffer; | 
 | 	unsigned int val; | 
 | 	int ret; | 
 |  | 
 | 	ret = kstrtouint(buf, 10, &val); | 
 | 	if (ret) | 
 | 		return ret; | 
 |  | 
 | 	if (val == buffer->length) | 
 | 		return len; | 
 |  | 
 | 	guard(mutex)(&iio_dev_opaque->mlock); | 
 | 	if (iio_buffer_is_active(buffer)) | 
 | 		return -EBUSY; | 
 |  | 
 | 	buffer->access->set_length(buffer, val); | 
 |  | 
 | 	if (buffer->length && buffer->length < buffer->watermark) | 
 | 		buffer->watermark = buffer->length; | 
 |  | 
 | 	return len; | 
 | } | 
 |  | 
 | static ssize_t enable_show(struct device *dev, struct device_attribute *attr, | 
 | 			   char *buf) | 
 | { | 
 | 	struct iio_buffer *buffer = to_iio_dev_attr(attr)->buffer; | 
 |  | 
 | 	return sysfs_emit(buf, "%d\n", iio_buffer_is_active(buffer)); | 
 | } | 
 |  | 
 | static int iio_storage_bytes_for_si(struct iio_dev *indio_dev, | 
 | 				    unsigned int scan_index) | 
 | { | 
 | 	const struct iio_chan_spec *ch; | 
 | 	const struct iio_scan_type *scan_type; | 
 | 	unsigned int bytes; | 
 |  | 
 | 	ch = iio_find_channel_from_si(indio_dev, scan_index); | 
 | 	scan_type = iio_get_current_scan_type(indio_dev, ch); | 
 | 	if (IS_ERR(scan_type)) | 
 | 		return PTR_ERR(scan_type); | 
 |  | 
 | 	bytes = scan_type->storagebits / 8; | 
 |  | 
 | 	if (scan_type->repeat > 1) | 
 | 		bytes *= scan_type->repeat; | 
 |  | 
 | 	return bytes; | 
 | } | 
 |  | 
 | static int iio_storage_bytes_for_timestamp(struct iio_dev *indio_dev) | 
 | { | 
 | 	struct iio_dev_opaque *iio_dev_opaque = to_iio_dev_opaque(indio_dev); | 
 |  | 
 | 	return iio_storage_bytes_for_si(indio_dev, | 
 | 					iio_dev_opaque->scan_index_timestamp); | 
 | } | 
 |  | 
 | static int iio_compute_scan_bytes(struct iio_dev *indio_dev, | 
 | 				  const unsigned long *mask, bool timestamp) | 
 | { | 
 | 	unsigned int bytes = 0; | 
 | 	int length, i, largest = 0; | 
 |  | 
 | 	/* How much space will the demuxed element take? */ | 
 | 	for_each_set_bit(i, mask, | 
 | 			 indio_dev->masklength) { | 
 | 		length = iio_storage_bytes_for_si(indio_dev, i); | 
 | 		if (length < 0) | 
 | 			return length; | 
 |  | 
 | 		bytes = ALIGN(bytes, length); | 
 | 		bytes += length; | 
 | 		largest = max(largest, length); | 
 | 	} | 
 |  | 
 | 	if (timestamp) { | 
 | 		length = iio_storage_bytes_for_timestamp(indio_dev); | 
 | 		if (length < 0) | 
 | 			return length; | 
 |  | 
 | 		bytes = ALIGN(bytes, length); | 
 | 		bytes += length; | 
 | 		largest = max(largest, length); | 
 | 	} | 
 |  | 
 | 	bytes = ALIGN(bytes, largest); | 
 | 	return bytes; | 
 | } | 
 |  | 
 | static void iio_buffer_activate(struct iio_dev *indio_dev, | 
 | 				struct iio_buffer *buffer) | 
 | { | 
 | 	struct iio_dev_opaque *iio_dev_opaque = to_iio_dev_opaque(indio_dev); | 
 |  | 
 | 	iio_buffer_get(buffer); | 
 | 	list_add(&buffer->buffer_list, &iio_dev_opaque->buffer_list); | 
 | } | 
 |  | 
 | static void iio_buffer_deactivate(struct iio_buffer *buffer) | 
 | { | 
 | 	list_del_init(&buffer->buffer_list); | 
 | 	wake_up_interruptible(&buffer->pollq); | 
 | 	iio_buffer_put(buffer); | 
 | } | 
 |  | 
 | static void iio_buffer_deactivate_all(struct iio_dev *indio_dev) | 
 | { | 
 | 	struct iio_dev_opaque *iio_dev_opaque = to_iio_dev_opaque(indio_dev); | 
 | 	struct iio_buffer *buffer, *_buffer; | 
 |  | 
 | 	list_for_each_entry_safe(buffer, _buffer, | 
 | 				 &iio_dev_opaque->buffer_list, buffer_list) | 
 | 		iio_buffer_deactivate(buffer); | 
 | } | 
 |  | 
 | static int iio_buffer_enable(struct iio_buffer *buffer, | 
 | 			     struct iio_dev *indio_dev) | 
 | { | 
 | 	if (!buffer->access->enable) | 
 | 		return 0; | 
 | 	return buffer->access->enable(buffer, indio_dev); | 
 | } | 
 |  | 
 | static int iio_buffer_disable(struct iio_buffer *buffer, | 
 | 			      struct iio_dev *indio_dev) | 
 | { | 
 | 	if (!buffer->access->disable) | 
 | 		return 0; | 
 | 	return buffer->access->disable(buffer, indio_dev); | 
 | } | 
 |  | 
 | static void iio_buffer_update_bytes_per_datum(struct iio_dev *indio_dev, | 
 | 					      struct iio_buffer *buffer) | 
 | { | 
 | 	unsigned int bytes; | 
 |  | 
 | 	if (!buffer->access->set_bytes_per_datum) | 
 | 		return; | 
 |  | 
 | 	bytes = iio_compute_scan_bytes(indio_dev, buffer->scan_mask, | 
 | 				       buffer->scan_timestamp); | 
 |  | 
 | 	buffer->access->set_bytes_per_datum(buffer, bytes); | 
 | } | 
 |  | 
 | static int iio_buffer_request_update(struct iio_dev *indio_dev, | 
 | 				     struct iio_buffer *buffer) | 
 | { | 
 | 	int ret; | 
 |  | 
 | 	iio_buffer_update_bytes_per_datum(indio_dev, buffer); | 
 | 	if (buffer->access->request_update) { | 
 | 		ret = buffer->access->request_update(buffer); | 
 | 		if (ret) { | 
 | 			dev_dbg(&indio_dev->dev, | 
 | 				"Buffer not started: buffer parameter update failed (%d)\n", | 
 | 				ret); | 
 | 			return ret; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static void iio_free_scan_mask(struct iio_dev *indio_dev, | 
 | 			       const unsigned long *mask) | 
 | { | 
 | 	/* If the mask is dynamically allocated free it, otherwise do nothing */ | 
 | 	if (!indio_dev->available_scan_masks) | 
 | 		bitmap_free(mask); | 
 | } | 
 |  | 
 | struct iio_device_config { | 
 | 	unsigned int mode; | 
 | 	unsigned int watermark; | 
 | 	const unsigned long *scan_mask; | 
 | 	unsigned int scan_bytes; | 
 | 	bool scan_timestamp; | 
 | }; | 
 |  | 
 | static int iio_verify_update(struct iio_dev *indio_dev, | 
 | 			     struct iio_buffer *insert_buffer, | 
 | 			     struct iio_buffer *remove_buffer, | 
 | 			     struct iio_device_config *config) | 
 | { | 
 | 	struct iio_dev_opaque *iio_dev_opaque = to_iio_dev_opaque(indio_dev); | 
 | 	unsigned long *compound_mask; | 
 | 	const unsigned long *scan_mask; | 
 | 	bool strict_scanmask = false; | 
 | 	struct iio_buffer *buffer; | 
 | 	bool scan_timestamp; | 
 | 	unsigned int modes; | 
 |  | 
 | 	if (insert_buffer && | 
 | 	    bitmap_empty(insert_buffer->scan_mask, indio_dev->masklength)) { | 
 | 		dev_dbg(&indio_dev->dev, | 
 | 			"At least one scan element must be enabled first\n"); | 
 | 		return -EINVAL; | 
 | 	} | 
 |  | 
 | 	memset(config, 0, sizeof(*config)); | 
 | 	config->watermark = ~0; | 
 |  | 
 | 	/* | 
 | 	 * If there is just one buffer and we are removing it there is nothing | 
 | 	 * to verify. | 
 | 	 */ | 
 | 	if (remove_buffer && !insert_buffer && | 
 | 	    list_is_singular(&iio_dev_opaque->buffer_list)) | 
 | 		return 0; | 
 |  | 
 | 	modes = indio_dev->modes; | 
 |  | 
 | 	list_for_each_entry(buffer, &iio_dev_opaque->buffer_list, buffer_list) { | 
 | 		if (buffer == remove_buffer) | 
 | 			continue; | 
 | 		modes &= buffer->access->modes; | 
 | 		config->watermark = min(config->watermark, buffer->watermark); | 
 | 	} | 
 |  | 
 | 	if (insert_buffer) { | 
 | 		modes &= insert_buffer->access->modes; | 
 | 		config->watermark = min(config->watermark, | 
 | 					insert_buffer->watermark); | 
 | 	} | 
 |  | 
 | 	/* Definitely possible for devices to support both of these. */ | 
 | 	if ((modes & INDIO_BUFFER_TRIGGERED) && indio_dev->trig) { | 
 | 		config->mode = INDIO_BUFFER_TRIGGERED; | 
 | 	} else if (modes & INDIO_BUFFER_HARDWARE) { | 
 | 		/* | 
 | 		 * Keep things simple for now and only allow a single buffer to | 
 | 		 * be connected in hardware mode. | 
 | 		 */ | 
 | 		if (insert_buffer && !list_empty(&iio_dev_opaque->buffer_list)) | 
 | 			return -EINVAL; | 
 | 		config->mode = INDIO_BUFFER_HARDWARE; | 
 | 		strict_scanmask = true; | 
 | 	} else if (modes & INDIO_BUFFER_SOFTWARE) { | 
 | 		config->mode = INDIO_BUFFER_SOFTWARE; | 
 | 	} else { | 
 | 		/* Can only occur on first buffer */ | 
 | 		if (indio_dev->modes & INDIO_BUFFER_TRIGGERED) | 
 | 			dev_dbg(&indio_dev->dev, "Buffer not started: no trigger\n"); | 
 | 		return -EINVAL; | 
 | 	} | 
 |  | 
 | 	/* What scan mask do we actually have? */ | 
 | 	compound_mask = bitmap_zalloc(indio_dev->masklength, GFP_KERNEL); | 
 | 	if (!compound_mask) | 
 | 		return -ENOMEM; | 
 |  | 
 | 	scan_timestamp = false; | 
 |  | 
 | 	list_for_each_entry(buffer, &iio_dev_opaque->buffer_list, buffer_list) { | 
 | 		if (buffer == remove_buffer) | 
 | 			continue; | 
 | 		bitmap_or(compound_mask, compound_mask, buffer->scan_mask, | 
 | 			  indio_dev->masklength); | 
 | 		scan_timestamp |= buffer->scan_timestamp; | 
 | 	} | 
 |  | 
 | 	if (insert_buffer) { | 
 | 		bitmap_or(compound_mask, compound_mask, | 
 | 			  insert_buffer->scan_mask, indio_dev->masklength); | 
 | 		scan_timestamp |= insert_buffer->scan_timestamp; | 
 | 	} | 
 |  | 
 | 	if (indio_dev->available_scan_masks) { | 
 | 		scan_mask = iio_scan_mask_match(indio_dev->available_scan_masks, | 
 | 						indio_dev->masklength, | 
 | 						compound_mask, | 
 | 						strict_scanmask); | 
 | 		bitmap_free(compound_mask); | 
 | 		if (!scan_mask) | 
 | 			return -EINVAL; | 
 | 	} else { | 
 | 		scan_mask = compound_mask; | 
 | 	} | 
 |  | 
 | 	config->scan_bytes = iio_compute_scan_bytes(indio_dev, | 
 | 						    scan_mask, scan_timestamp); | 
 | 	config->scan_mask = scan_mask; | 
 | 	config->scan_timestamp = scan_timestamp; | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | /** | 
 |  * struct iio_demux_table - table describing demux memcpy ops | 
 |  * @from:	index to copy from | 
 |  * @to:		index to copy to | 
 |  * @length:	how many bytes to copy | 
 |  * @l:		list head used for management | 
 |  */ | 
 | struct iio_demux_table { | 
 | 	unsigned int from; | 
 | 	unsigned int to; | 
 | 	unsigned int length; | 
 | 	struct list_head l; | 
 | }; | 
 |  | 
 | static void iio_buffer_demux_free(struct iio_buffer *buffer) | 
 | { | 
 | 	struct iio_demux_table *p, *q; | 
 |  | 
 | 	list_for_each_entry_safe(p, q, &buffer->demux_list, l) { | 
 | 		list_del(&p->l); | 
 | 		kfree(p); | 
 | 	} | 
 | } | 
 |  | 
 | static int iio_buffer_add_demux(struct iio_buffer *buffer, | 
 | 				struct iio_demux_table **p, unsigned int in_loc, | 
 | 				unsigned int out_loc, | 
 | 				unsigned int length) | 
 | { | 
 | 	if (*p && (*p)->from + (*p)->length == in_loc && | 
 | 	    (*p)->to + (*p)->length == out_loc) { | 
 | 		(*p)->length += length; | 
 | 	} else { | 
 | 		*p = kmalloc(sizeof(**p), GFP_KERNEL); | 
 | 		if (!(*p)) | 
 | 			return -ENOMEM; | 
 | 		(*p)->from = in_loc; | 
 | 		(*p)->to = out_loc; | 
 | 		(*p)->length = length; | 
 | 		list_add_tail(&(*p)->l, &buffer->demux_list); | 
 | 	} | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int iio_buffer_update_demux(struct iio_dev *indio_dev, | 
 | 				   struct iio_buffer *buffer) | 
 | { | 
 | 	int ret, in_ind = -1, out_ind, length; | 
 | 	unsigned int in_loc = 0, out_loc = 0; | 
 | 	struct iio_demux_table *p = NULL; | 
 |  | 
 | 	/* Clear out any old demux */ | 
 | 	iio_buffer_demux_free(buffer); | 
 | 	kfree(buffer->demux_bounce); | 
 | 	buffer->demux_bounce = NULL; | 
 |  | 
 | 	/* First work out which scan mode we will actually have */ | 
 | 	if (bitmap_equal(indio_dev->active_scan_mask, | 
 | 			 buffer->scan_mask, | 
 | 			 indio_dev->masklength)) | 
 | 		return 0; | 
 |  | 
 | 	/* Now we have the two masks, work from least sig and build up sizes */ | 
 | 	for_each_set_bit(out_ind, | 
 | 			 buffer->scan_mask, | 
 | 			 indio_dev->masklength) { | 
 | 		in_ind = find_next_bit(indio_dev->active_scan_mask, | 
 | 				       indio_dev->masklength, | 
 | 				       in_ind + 1); | 
 | 		while (in_ind != out_ind) { | 
 | 			ret = iio_storage_bytes_for_si(indio_dev, in_ind); | 
 | 			if (ret < 0) | 
 | 				goto error_clear_mux_table; | 
 |  | 
 | 			length = ret; | 
 | 			/* Make sure we are aligned */ | 
 | 			in_loc = roundup(in_loc, length) + length; | 
 | 			in_ind = find_next_bit(indio_dev->active_scan_mask, | 
 | 					       indio_dev->masklength, | 
 | 					       in_ind + 1); | 
 | 		} | 
 | 		ret = iio_storage_bytes_for_si(indio_dev, in_ind); | 
 | 		if (ret < 0) | 
 | 			goto error_clear_mux_table; | 
 |  | 
 | 		length = ret; | 
 | 		out_loc = roundup(out_loc, length); | 
 | 		in_loc = roundup(in_loc, length); | 
 | 		ret = iio_buffer_add_demux(buffer, &p, in_loc, out_loc, length); | 
 | 		if (ret) | 
 | 			goto error_clear_mux_table; | 
 | 		out_loc += length; | 
 | 		in_loc += length; | 
 | 	} | 
 | 	/* Relies on scan_timestamp being last */ | 
 | 	if (buffer->scan_timestamp) { | 
 | 		ret = iio_storage_bytes_for_timestamp(indio_dev); | 
 | 		if (ret < 0) | 
 | 			goto error_clear_mux_table; | 
 |  | 
 | 		length = ret; | 
 | 		out_loc = roundup(out_loc, length); | 
 | 		in_loc = roundup(in_loc, length); | 
 | 		ret = iio_buffer_add_demux(buffer, &p, in_loc, out_loc, length); | 
 | 		if (ret) | 
 | 			goto error_clear_mux_table; | 
 | 		out_loc += length; | 
 | 	} | 
 | 	buffer->demux_bounce = kzalloc(out_loc, GFP_KERNEL); | 
 | 	if (!buffer->demux_bounce) { | 
 | 		ret = -ENOMEM; | 
 | 		goto error_clear_mux_table; | 
 | 	} | 
 | 	return 0; | 
 |  | 
 | error_clear_mux_table: | 
 | 	iio_buffer_demux_free(buffer); | 
 |  | 
 | 	return ret; | 
 | } | 
 |  | 
 | static int iio_update_demux(struct iio_dev *indio_dev) | 
 | { | 
 | 	struct iio_dev_opaque *iio_dev_opaque = to_iio_dev_opaque(indio_dev); | 
 | 	struct iio_buffer *buffer; | 
 | 	int ret; | 
 |  | 
 | 	list_for_each_entry(buffer, &iio_dev_opaque->buffer_list, buffer_list) { | 
 | 		ret = iio_buffer_update_demux(indio_dev, buffer); | 
 | 		if (ret < 0) | 
 | 			goto error_clear_mux_table; | 
 | 	} | 
 | 	return 0; | 
 |  | 
 | error_clear_mux_table: | 
 | 	list_for_each_entry(buffer, &iio_dev_opaque->buffer_list, buffer_list) | 
 | 		iio_buffer_demux_free(buffer); | 
 |  | 
 | 	return ret; | 
 | } | 
 |  | 
 | static int iio_enable_buffers(struct iio_dev *indio_dev, | 
 | 			      struct iio_device_config *config) | 
 | { | 
 | 	struct iio_dev_opaque *iio_dev_opaque = to_iio_dev_opaque(indio_dev); | 
 | 	struct iio_buffer *buffer, *tmp = NULL; | 
 | 	int ret; | 
 |  | 
 | 	indio_dev->active_scan_mask = config->scan_mask; | 
 | 	indio_dev->scan_timestamp = config->scan_timestamp; | 
 | 	indio_dev->scan_bytes = config->scan_bytes; | 
 | 	iio_dev_opaque->currentmode = config->mode; | 
 |  | 
 | 	iio_update_demux(indio_dev); | 
 |  | 
 | 	/* Wind up again */ | 
 | 	if (indio_dev->setup_ops->preenable) { | 
 | 		ret = indio_dev->setup_ops->preenable(indio_dev); | 
 | 		if (ret) { | 
 | 			dev_dbg(&indio_dev->dev, | 
 | 				"Buffer not started: buffer preenable failed (%d)\n", ret); | 
 | 			goto err_undo_config; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	if (indio_dev->info->update_scan_mode) { | 
 | 		ret = indio_dev->info | 
 | 			->update_scan_mode(indio_dev, | 
 | 					   indio_dev->active_scan_mask); | 
 | 		if (ret < 0) { | 
 | 			dev_dbg(&indio_dev->dev, | 
 | 				"Buffer not started: update scan mode failed (%d)\n", | 
 | 				ret); | 
 | 			goto err_run_postdisable; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	if (indio_dev->info->hwfifo_set_watermark) | 
 | 		indio_dev->info->hwfifo_set_watermark(indio_dev, | 
 | 			config->watermark); | 
 |  | 
 | 	list_for_each_entry(buffer, &iio_dev_opaque->buffer_list, buffer_list) { | 
 | 		ret = iio_buffer_enable(buffer, indio_dev); | 
 | 		if (ret) { | 
 | 			tmp = buffer; | 
 | 			goto err_disable_buffers; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	if (iio_dev_opaque->currentmode == INDIO_BUFFER_TRIGGERED) { | 
 | 		ret = iio_trigger_attach_poll_func(indio_dev->trig, | 
 | 						   indio_dev->pollfunc); | 
 | 		if (ret) | 
 | 			goto err_disable_buffers; | 
 | 	} | 
 |  | 
 | 	if (indio_dev->setup_ops->postenable) { | 
 | 		ret = indio_dev->setup_ops->postenable(indio_dev); | 
 | 		if (ret) { | 
 | 			dev_dbg(&indio_dev->dev, | 
 | 				"Buffer not started: postenable failed (%d)\n", ret); | 
 | 			goto err_detach_pollfunc; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	return 0; | 
 |  | 
 | err_detach_pollfunc: | 
 | 	if (iio_dev_opaque->currentmode == INDIO_BUFFER_TRIGGERED) { | 
 | 		iio_trigger_detach_poll_func(indio_dev->trig, | 
 | 					     indio_dev->pollfunc); | 
 | 	} | 
 | err_disable_buffers: | 
 | 	buffer = list_prepare_entry(tmp, &iio_dev_opaque->buffer_list, buffer_list); | 
 | 	list_for_each_entry_continue_reverse(buffer, &iio_dev_opaque->buffer_list, | 
 | 					     buffer_list) | 
 | 		iio_buffer_disable(buffer, indio_dev); | 
 | err_run_postdisable: | 
 | 	if (indio_dev->setup_ops->postdisable) | 
 | 		indio_dev->setup_ops->postdisable(indio_dev); | 
 | err_undo_config: | 
 | 	iio_dev_opaque->currentmode = INDIO_DIRECT_MODE; | 
 | 	indio_dev->active_scan_mask = NULL; | 
 |  | 
 | 	return ret; | 
 | } | 
 |  | 
 | static int iio_disable_buffers(struct iio_dev *indio_dev) | 
 | { | 
 | 	struct iio_dev_opaque *iio_dev_opaque = to_iio_dev_opaque(indio_dev); | 
 | 	struct iio_buffer *buffer; | 
 | 	int ret = 0; | 
 | 	int ret2; | 
 |  | 
 | 	/* Wind down existing buffers - iff there are any */ | 
 | 	if (list_empty(&iio_dev_opaque->buffer_list)) | 
 | 		return 0; | 
 |  | 
 | 	/* | 
 | 	 * If things go wrong at some step in disable we still need to continue | 
 | 	 * to perform the other steps, otherwise we leave the device in a | 
 | 	 * inconsistent state. We return the error code for the first error we | 
 | 	 * encountered. | 
 | 	 */ | 
 |  | 
 | 	if (indio_dev->setup_ops->predisable) { | 
 | 		ret2 = indio_dev->setup_ops->predisable(indio_dev); | 
 | 		if (ret2 && !ret) | 
 | 			ret = ret2; | 
 | 	} | 
 |  | 
 | 	if (iio_dev_opaque->currentmode == INDIO_BUFFER_TRIGGERED) { | 
 | 		iio_trigger_detach_poll_func(indio_dev->trig, | 
 | 					     indio_dev->pollfunc); | 
 | 	} | 
 |  | 
 | 	list_for_each_entry(buffer, &iio_dev_opaque->buffer_list, buffer_list) { | 
 | 		ret2 = iio_buffer_disable(buffer, indio_dev); | 
 | 		if (ret2 && !ret) | 
 | 			ret = ret2; | 
 | 	} | 
 |  | 
 | 	if (indio_dev->setup_ops->postdisable) { | 
 | 		ret2 = indio_dev->setup_ops->postdisable(indio_dev); | 
 | 		if (ret2 && !ret) | 
 | 			ret = ret2; | 
 | 	} | 
 |  | 
 | 	iio_free_scan_mask(indio_dev, indio_dev->active_scan_mask); | 
 | 	indio_dev->active_scan_mask = NULL; | 
 | 	iio_dev_opaque->currentmode = INDIO_DIRECT_MODE; | 
 |  | 
 | 	return ret; | 
 | } | 
 |  | 
 | static int __iio_update_buffers(struct iio_dev *indio_dev, | 
 | 				struct iio_buffer *insert_buffer, | 
 | 				struct iio_buffer *remove_buffer) | 
 | { | 
 | 	struct iio_dev_opaque *iio_dev_opaque = to_iio_dev_opaque(indio_dev); | 
 | 	struct iio_device_config new_config; | 
 | 	int ret; | 
 |  | 
 | 	ret = iio_verify_update(indio_dev, insert_buffer, remove_buffer, | 
 | 				&new_config); | 
 | 	if (ret) | 
 | 		return ret; | 
 |  | 
 | 	if (insert_buffer) { | 
 | 		ret = iio_buffer_request_update(indio_dev, insert_buffer); | 
 | 		if (ret) | 
 | 			goto err_free_config; | 
 | 	} | 
 |  | 
 | 	ret = iio_disable_buffers(indio_dev); | 
 | 	if (ret) | 
 | 		goto err_deactivate_all; | 
 |  | 
 | 	if (remove_buffer) | 
 | 		iio_buffer_deactivate(remove_buffer); | 
 | 	if (insert_buffer) | 
 | 		iio_buffer_activate(indio_dev, insert_buffer); | 
 |  | 
 | 	/* If no buffers in list, we are done */ | 
 | 	if (list_empty(&iio_dev_opaque->buffer_list)) | 
 | 		return 0; | 
 |  | 
 | 	ret = iio_enable_buffers(indio_dev, &new_config); | 
 | 	if (ret) | 
 | 		goto err_deactivate_all; | 
 |  | 
 | 	return 0; | 
 |  | 
 | err_deactivate_all: | 
 | 	/* | 
 | 	 * We've already verified that the config is valid earlier. If things go | 
 | 	 * wrong in either enable or disable the most likely reason is an IO | 
 | 	 * error from the device. In this case there is no good recovery | 
 | 	 * strategy. Just make sure to disable everything and leave the device | 
 | 	 * in a sane state.  With a bit of luck the device might come back to | 
 | 	 * life again later and userspace can try again. | 
 | 	 */ | 
 | 	iio_buffer_deactivate_all(indio_dev); | 
 |  | 
 | err_free_config: | 
 | 	iio_free_scan_mask(indio_dev, new_config.scan_mask); | 
 | 	return ret; | 
 | } | 
 |  | 
 | int iio_update_buffers(struct iio_dev *indio_dev, | 
 | 		       struct iio_buffer *insert_buffer, | 
 | 		       struct iio_buffer *remove_buffer) | 
 | { | 
 | 	struct iio_dev_opaque *iio_dev_opaque = to_iio_dev_opaque(indio_dev); | 
 |  | 
 | 	if (insert_buffer == remove_buffer) | 
 | 		return 0; | 
 |  | 
 | 	if (insert_buffer && | 
 | 	    insert_buffer->direction == IIO_BUFFER_DIRECTION_OUT) | 
 | 		return -EINVAL; | 
 |  | 
 | 	guard(mutex)(&iio_dev_opaque->info_exist_lock); | 
 | 	guard(mutex)(&iio_dev_opaque->mlock); | 
 |  | 
 | 	if (insert_buffer && iio_buffer_is_active(insert_buffer)) | 
 | 		insert_buffer = NULL; | 
 |  | 
 | 	if (remove_buffer && !iio_buffer_is_active(remove_buffer)) | 
 | 		remove_buffer = NULL; | 
 |  | 
 | 	if (!insert_buffer && !remove_buffer) | 
 | 		return 0; | 
 |  | 
 | 	if (!indio_dev->info) | 
 | 		return -ENODEV; | 
 |  | 
 | 	return __iio_update_buffers(indio_dev, insert_buffer, remove_buffer); | 
 | } | 
 | EXPORT_SYMBOL_GPL(iio_update_buffers); | 
 |  | 
 | void iio_disable_all_buffers(struct iio_dev *indio_dev) | 
 | { | 
 | 	iio_disable_buffers(indio_dev); | 
 | 	iio_buffer_deactivate_all(indio_dev); | 
 | } | 
 |  | 
 | static ssize_t enable_store(struct device *dev, struct device_attribute *attr, | 
 | 			    const char *buf, size_t len) | 
 | { | 
 | 	int ret; | 
 | 	bool requested_state; | 
 | 	struct iio_dev *indio_dev = dev_to_iio_dev(dev); | 
 | 	struct iio_dev_opaque *iio_dev_opaque = to_iio_dev_opaque(indio_dev); | 
 | 	struct iio_buffer *buffer = to_iio_dev_attr(attr)->buffer; | 
 | 	bool inlist; | 
 |  | 
 | 	ret = kstrtobool(buf, &requested_state); | 
 | 	if (ret < 0) | 
 | 		return ret; | 
 |  | 
 | 	guard(mutex)(&iio_dev_opaque->mlock); | 
 |  | 
 | 	/* Find out if it is in the list */ | 
 | 	inlist = iio_buffer_is_active(buffer); | 
 | 	/* Already in desired state */ | 
 | 	if (inlist == requested_state) | 
 | 		return len; | 
 |  | 
 | 	if (requested_state) | 
 | 		ret = __iio_update_buffers(indio_dev, buffer, NULL); | 
 | 	else | 
 | 		ret = __iio_update_buffers(indio_dev, NULL, buffer); | 
 | 	if (ret) | 
 | 		return ret; | 
 |  | 
 | 	return len; | 
 | } | 
 |  | 
 | static ssize_t watermark_show(struct device *dev, struct device_attribute *attr, | 
 | 			      char *buf) | 
 | { | 
 | 	struct iio_buffer *buffer = to_iio_dev_attr(attr)->buffer; | 
 |  | 
 | 	return sysfs_emit(buf, "%u\n", buffer->watermark); | 
 | } | 
 |  | 
 | static ssize_t watermark_store(struct device *dev, | 
 | 			       struct device_attribute *attr, | 
 | 			       const char *buf, size_t len) | 
 | { | 
 | 	struct iio_dev *indio_dev = dev_to_iio_dev(dev); | 
 | 	struct iio_dev_opaque *iio_dev_opaque = to_iio_dev_opaque(indio_dev); | 
 | 	struct iio_buffer *buffer = to_iio_dev_attr(attr)->buffer; | 
 | 	unsigned int val; | 
 | 	int ret; | 
 |  | 
 | 	ret = kstrtouint(buf, 10, &val); | 
 | 	if (ret) | 
 | 		return ret; | 
 | 	if (!val) | 
 | 		return -EINVAL; | 
 |  | 
 | 	guard(mutex)(&iio_dev_opaque->mlock); | 
 |  | 
 | 	if (val > buffer->length) | 
 | 		return -EINVAL; | 
 |  | 
 | 	if (iio_buffer_is_active(buffer)) | 
 | 		return -EBUSY; | 
 |  | 
 | 	buffer->watermark = val; | 
 |  | 
 | 	return len; | 
 | } | 
 |  | 
 | static ssize_t data_available_show(struct device *dev, | 
 | 				   struct device_attribute *attr, char *buf) | 
 | { | 
 | 	struct iio_buffer *buffer = to_iio_dev_attr(attr)->buffer; | 
 |  | 
 | 	return sysfs_emit(buf, "%zu\n", iio_buffer_data_available(buffer)); | 
 | } | 
 |  | 
 | static ssize_t direction_show(struct device *dev, | 
 | 			      struct device_attribute *attr, | 
 | 			      char *buf) | 
 | { | 
 | 	struct iio_buffer *buffer = to_iio_dev_attr(attr)->buffer; | 
 |  | 
 | 	switch (buffer->direction) { | 
 | 	case IIO_BUFFER_DIRECTION_IN: | 
 | 		return sysfs_emit(buf, "in\n"); | 
 | 	case IIO_BUFFER_DIRECTION_OUT: | 
 | 		return sysfs_emit(buf, "out\n"); | 
 | 	default: | 
 | 		return -EINVAL; | 
 | 	} | 
 | } | 
 |  | 
 | static DEVICE_ATTR_RW(length); | 
 | static struct device_attribute dev_attr_length_ro = __ATTR_RO(length); | 
 | static DEVICE_ATTR_RW(enable); | 
 | static DEVICE_ATTR_RW(watermark); | 
 | static struct device_attribute dev_attr_watermark_ro = __ATTR_RO(watermark); | 
 | static DEVICE_ATTR_RO(data_available); | 
 | static DEVICE_ATTR_RO(direction); | 
 |  | 
 | /* | 
 |  * When adding new attributes here, put the at the end, at least until | 
 |  * the code that handles the length/length_ro & watermark/watermark_ro | 
 |  * assignments gets cleaned up. Otherwise these can create some weird | 
 |  * duplicate attributes errors under some setups. | 
 |  */ | 
 | static struct attribute *iio_buffer_attrs[] = { | 
 | 	&dev_attr_length.attr, | 
 | 	&dev_attr_enable.attr, | 
 | 	&dev_attr_watermark.attr, | 
 | 	&dev_attr_data_available.attr, | 
 | 	&dev_attr_direction.attr, | 
 | }; | 
 |  | 
 | #define to_dev_attr(_attr) container_of(_attr, struct device_attribute, attr) | 
 |  | 
 | static struct attribute *iio_buffer_wrap_attr(struct iio_buffer *buffer, | 
 | 					      struct attribute *attr) | 
 | { | 
 | 	struct device_attribute *dattr = to_dev_attr(attr); | 
 | 	struct iio_dev_attr *iio_attr; | 
 |  | 
 | 	iio_attr = kzalloc(sizeof(*iio_attr), GFP_KERNEL); | 
 | 	if (!iio_attr) | 
 | 		return NULL; | 
 |  | 
 | 	iio_attr->buffer = buffer; | 
 | 	memcpy(&iio_attr->dev_attr, dattr, sizeof(iio_attr->dev_attr)); | 
 | 	iio_attr->dev_attr.attr.name = kstrdup_const(attr->name, GFP_KERNEL); | 
 | 	if (!iio_attr->dev_attr.attr.name) { | 
 | 		kfree(iio_attr); | 
 | 		return NULL; | 
 | 	} | 
 |  | 
 | 	sysfs_attr_init(&iio_attr->dev_attr.attr); | 
 |  | 
 | 	list_add(&iio_attr->l, &buffer->buffer_attr_list); | 
 |  | 
 | 	return &iio_attr->dev_attr.attr; | 
 | } | 
 |  | 
 | static int iio_buffer_register_legacy_sysfs_groups(struct iio_dev *indio_dev, | 
 | 						   struct attribute **buffer_attrs, | 
 | 						   int buffer_attrcount, | 
 | 						   int scan_el_attrcount) | 
 | { | 
 | 	struct iio_dev_opaque *iio_dev_opaque = to_iio_dev_opaque(indio_dev); | 
 | 	struct attribute_group *group; | 
 | 	struct attribute **attrs; | 
 | 	int ret; | 
 |  | 
 | 	attrs = kcalloc(buffer_attrcount + 1, sizeof(*attrs), GFP_KERNEL); | 
 | 	if (!attrs) | 
 | 		return -ENOMEM; | 
 |  | 
 | 	memcpy(attrs, buffer_attrs, buffer_attrcount * sizeof(*attrs)); | 
 |  | 
 | 	group = &iio_dev_opaque->legacy_buffer_group; | 
 | 	group->attrs = attrs; | 
 | 	group->name = "buffer"; | 
 |  | 
 | 	ret = iio_device_register_sysfs_group(indio_dev, group); | 
 | 	if (ret) | 
 | 		goto error_free_buffer_attrs; | 
 |  | 
 | 	attrs = kcalloc(scan_el_attrcount + 1, sizeof(*attrs), GFP_KERNEL); | 
 | 	if (!attrs) { | 
 | 		ret = -ENOMEM; | 
 | 		goto error_free_buffer_attrs; | 
 | 	} | 
 |  | 
 | 	memcpy(attrs, &buffer_attrs[buffer_attrcount], | 
 | 	       scan_el_attrcount * sizeof(*attrs)); | 
 |  | 
 | 	group = &iio_dev_opaque->legacy_scan_el_group; | 
 | 	group->attrs = attrs; | 
 | 	group->name = "scan_elements"; | 
 |  | 
 | 	ret = iio_device_register_sysfs_group(indio_dev, group); | 
 | 	if (ret) | 
 | 		goto error_free_scan_el_attrs; | 
 |  | 
 | 	return 0; | 
 |  | 
 | error_free_scan_el_attrs: | 
 | 	kfree(iio_dev_opaque->legacy_scan_el_group.attrs); | 
 | error_free_buffer_attrs: | 
 | 	kfree(iio_dev_opaque->legacy_buffer_group.attrs); | 
 |  | 
 | 	return ret; | 
 | } | 
 |  | 
 | static void iio_buffer_unregister_legacy_sysfs_groups(struct iio_dev *indio_dev) | 
 | { | 
 | 	struct iio_dev_opaque *iio_dev_opaque = to_iio_dev_opaque(indio_dev); | 
 |  | 
 | 	kfree(iio_dev_opaque->legacy_buffer_group.attrs); | 
 | 	kfree(iio_dev_opaque->legacy_scan_el_group.attrs); | 
 | } | 
 |  | 
 | static void iio_buffer_dmabuf_release(struct kref *ref) | 
 | { | 
 | 	struct iio_dmabuf_priv *priv = container_of(ref, struct iio_dmabuf_priv, ref); | 
 | 	struct dma_buf_attachment *attach = priv->attach; | 
 | 	struct iio_buffer *buffer = priv->buffer; | 
 | 	struct dma_buf *dmabuf = attach->dmabuf; | 
 |  | 
 | 	dma_resv_lock(dmabuf->resv, NULL); | 
 | 	dma_buf_unmap_attachment(attach, priv->sgt, priv->dir); | 
 | 	dma_resv_unlock(dmabuf->resv); | 
 |  | 
 | 	buffer->access->detach_dmabuf(buffer, priv->block); | 
 |  | 
 | 	dma_buf_detach(attach->dmabuf, attach); | 
 | 	dma_buf_put(dmabuf); | 
 | 	kfree(priv); | 
 | } | 
 |  | 
 | static void iio_buffer_dmabuf_get(struct dma_buf_attachment *attach) | 
 | { | 
 | 	struct iio_dmabuf_priv *priv = attach->importer_priv; | 
 |  | 
 | 	kref_get(&priv->ref); | 
 | } | 
 |  | 
 | static void iio_buffer_dmabuf_put(struct dma_buf_attachment *attach) | 
 | { | 
 | 	struct iio_dmabuf_priv *priv = attach->importer_priv; | 
 |  | 
 | 	kref_put(&priv->ref, iio_buffer_dmabuf_release); | 
 | } | 
 |  | 
 | static int iio_buffer_chrdev_release(struct inode *inode, struct file *filep) | 
 | { | 
 | 	struct iio_dev_buffer_pair *ib = filep->private_data; | 
 | 	struct iio_dev *indio_dev = ib->indio_dev; | 
 | 	struct iio_buffer *buffer = ib->buffer; | 
 | 	struct iio_dmabuf_priv *priv, *tmp; | 
 |  | 
 | 	wake_up(&buffer->pollq); | 
 |  | 
 | 	guard(mutex)(&buffer->dmabufs_mutex); | 
 |  | 
 | 	/* Close all attached DMABUFs */ | 
 | 	list_for_each_entry_safe(priv, tmp, &buffer->dmabufs, entry) { | 
 | 		list_del_init(&priv->entry); | 
 | 		iio_buffer_dmabuf_put(priv->attach); | 
 | 	} | 
 |  | 
 | 	kfree(ib); | 
 | 	clear_bit(IIO_BUSY_BIT_POS, &buffer->flags); | 
 | 	iio_device_put(indio_dev); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int iio_dma_resv_lock(struct dma_buf *dmabuf, bool nonblock) | 
 | { | 
 | 	if (!nonblock) | 
 | 		return dma_resv_lock_interruptible(dmabuf->resv, NULL); | 
 |  | 
 | 	if (!dma_resv_trylock(dmabuf->resv)) | 
 | 		return -EBUSY; | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static struct dma_buf_attachment * | 
 | iio_buffer_find_attachment(struct iio_dev_buffer_pair *ib, | 
 | 			   struct dma_buf *dmabuf, bool nonblock) | 
 | { | 
 | 	struct device *dev = ib->indio_dev->dev.parent; | 
 | 	struct iio_buffer *buffer = ib->buffer; | 
 | 	struct dma_buf_attachment *attach = NULL; | 
 | 	struct iio_dmabuf_priv *priv; | 
 |  | 
 | 	guard(mutex)(&buffer->dmabufs_mutex); | 
 |  | 
 | 	list_for_each_entry(priv, &buffer->dmabufs, entry) { | 
 | 		if (priv->attach->dev == dev | 
 | 		    && priv->attach->dmabuf == dmabuf) { | 
 | 			attach = priv->attach; | 
 | 			break; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	if (attach) | 
 | 		iio_buffer_dmabuf_get(attach); | 
 |  | 
 | 	return attach ?: ERR_PTR(-EPERM); | 
 | } | 
 |  | 
 | static int iio_buffer_attach_dmabuf(struct iio_dev_buffer_pair *ib, | 
 | 				    int __user *user_fd, bool nonblock) | 
 | { | 
 | 	struct iio_dev *indio_dev = ib->indio_dev; | 
 | 	struct iio_buffer *buffer = ib->buffer; | 
 | 	struct dma_buf_attachment *attach; | 
 | 	struct iio_dmabuf_priv *priv, *each; | 
 | 	struct dma_buf *dmabuf; | 
 | 	int err, fd; | 
 |  | 
 | 	if (!buffer->access->attach_dmabuf | 
 | 	    || !buffer->access->detach_dmabuf | 
 | 	    || !buffer->access->enqueue_dmabuf) | 
 | 		return -EPERM; | 
 |  | 
 | 	if (copy_from_user(&fd, user_fd, sizeof(fd))) | 
 | 		return -EFAULT; | 
 |  | 
 | 	priv = kzalloc(sizeof(*priv), GFP_KERNEL); | 
 | 	if (!priv) | 
 | 		return -ENOMEM; | 
 |  | 
 | 	spin_lock_init(&priv->lock); | 
 | 	priv->context = dma_fence_context_alloc(1); | 
 |  | 
 | 	dmabuf = dma_buf_get(fd); | 
 | 	if (IS_ERR(dmabuf)) { | 
 | 		err = PTR_ERR(dmabuf); | 
 | 		goto err_free_priv; | 
 | 	} | 
 |  | 
 | 	attach = dma_buf_attach(dmabuf, indio_dev->dev.parent); | 
 | 	if (IS_ERR(attach)) { | 
 | 		err = PTR_ERR(attach); | 
 | 		goto err_dmabuf_put; | 
 | 	} | 
 |  | 
 | 	err = iio_dma_resv_lock(dmabuf, nonblock); | 
 | 	if (err) | 
 | 		goto err_dmabuf_detach; | 
 |  | 
 | 	priv->dir = buffer->direction == IIO_BUFFER_DIRECTION_IN | 
 | 		? DMA_FROM_DEVICE : DMA_TO_DEVICE; | 
 |  | 
 | 	priv->sgt = dma_buf_map_attachment(attach, priv->dir); | 
 | 	if (IS_ERR(priv->sgt)) { | 
 | 		err = PTR_ERR(priv->sgt); | 
 | 		dev_err(&indio_dev->dev, "Unable to map attachment: %d\n", err); | 
 | 		goto err_resv_unlock; | 
 | 	} | 
 |  | 
 | 	kref_init(&priv->ref); | 
 | 	priv->buffer = buffer; | 
 | 	priv->attach = attach; | 
 | 	attach->importer_priv = priv; | 
 |  | 
 | 	priv->block = buffer->access->attach_dmabuf(buffer, attach); | 
 | 	if (IS_ERR(priv->block)) { | 
 | 		err = PTR_ERR(priv->block); | 
 | 		goto err_dmabuf_unmap_attachment; | 
 | 	} | 
 |  | 
 | 	dma_resv_unlock(dmabuf->resv); | 
 |  | 
 | 	mutex_lock(&buffer->dmabufs_mutex); | 
 |  | 
 | 	/* | 
 | 	 * Check whether we already have an attachment for this driver/DMABUF | 
 | 	 * combo. If we do, refuse to attach. | 
 | 	 */ | 
 | 	list_for_each_entry(each, &buffer->dmabufs, entry) { | 
 | 		if (each->attach->dev == indio_dev->dev.parent | 
 | 		    && each->attach->dmabuf == dmabuf) { | 
 | 			/* | 
 | 			 * We unlocked the reservation object, so going through | 
 | 			 * the cleanup code would mean re-locking it first. | 
 | 			 * At this stage it is simpler to free the attachment | 
 | 			 * using iio_buffer_dma_put(). | 
 | 			 */ | 
 | 			mutex_unlock(&buffer->dmabufs_mutex); | 
 | 			iio_buffer_dmabuf_put(attach); | 
 | 			return -EBUSY; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	/* Otherwise, add the new attachment to our dmabufs list. */ | 
 | 	list_add(&priv->entry, &buffer->dmabufs); | 
 | 	mutex_unlock(&buffer->dmabufs_mutex); | 
 |  | 
 | 	return 0; | 
 |  | 
 | err_dmabuf_unmap_attachment: | 
 | 	dma_buf_unmap_attachment(attach, priv->sgt, priv->dir); | 
 | err_resv_unlock: | 
 | 	dma_resv_unlock(dmabuf->resv); | 
 | err_dmabuf_detach: | 
 | 	dma_buf_detach(dmabuf, attach); | 
 | err_dmabuf_put: | 
 | 	dma_buf_put(dmabuf); | 
 | err_free_priv: | 
 | 	kfree(priv); | 
 |  | 
 | 	return err; | 
 | } | 
 |  | 
 | static int iio_buffer_detach_dmabuf(struct iio_dev_buffer_pair *ib, | 
 | 				    int __user *user_req, bool nonblock) | 
 | { | 
 | 	struct iio_buffer *buffer = ib->buffer; | 
 | 	struct iio_dev *indio_dev = ib->indio_dev; | 
 | 	struct iio_dmabuf_priv *priv; | 
 | 	struct dma_buf *dmabuf; | 
 | 	int dmabuf_fd, ret = -EPERM; | 
 |  | 
 | 	if (copy_from_user(&dmabuf_fd, user_req, sizeof(dmabuf_fd))) | 
 | 		return -EFAULT; | 
 |  | 
 | 	dmabuf = dma_buf_get(dmabuf_fd); | 
 | 	if (IS_ERR(dmabuf)) | 
 | 		return PTR_ERR(dmabuf); | 
 |  | 
 | 	guard(mutex)(&buffer->dmabufs_mutex); | 
 |  | 
 | 	list_for_each_entry(priv, &buffer->dmabufs, entry) { | 
 | 		if (priv->attach->dev == indio_dev->dev.parent | 
 | 		    && priv->attach->dmabuf == dmabuf) { | 
 | 			list_del(&priv->entry); | 
 |  | 
 | 			/* Unref the reference from iio_buffer_attach_dmabuf() */ | 
 | 			iio_buffer_dmabuf_put(priv->attach); | 
 | 			ret = 0; | 
 | 			break; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	dma_buf_put(dmabuf); | 
 |  | 
 | 	return ret; | 
 | } | 
 |  | 
 | static const char * | 
 | iio_buffer_dma_fence_get_driver_name(struct dma_fence *fence) | 
 | { | 
 | 	return "iio"; | 
 | } | 
 |  | 
 | static void iio_buffer_dma_fence_release(struct dma_fence *fence) | 
 | { | 
 | 	struct iio_dma_fence *iio_fence = | 
 | 		container_of(fence, struct iio_dma_fence, base); | 
 |  | 
 | 	kfree(iio_fence); | 
 | } | 
 |  | 
 | static const struct dma_fence_ops iio_buffer_dma_fence_ops = { | 
 | 	.get_driver_name	= iio_buffer_dma_fence_get_driver_name, | 
 | 	.get_timeline_name	= iio_buffer_dma_fence_get_driver_name, | 
 | 	.release		= iio_buffer_dma_fence_release, | 
 | }; | 
 |  | 
 | static int iio_buffer_enqueue_dmabuf(struct iio_dev_buffer_pair *ib, | 
 | 				     struct iio_dmabuf __user *iio_dmabuf_req, | 
 | 				     bool nonblock) | 
 | { | 
 | 	struct iio_buffer *buffer = ib->buffer; | 
 | 	struct iio_dmabuf iio_dmabuf; | 
 | 	struct dma_buf_attachment *attach; | 
 | 	struct iio_dmabuf_priv *priv; | 
 | 	struct iio_dma_fence *fence; | 
 | 	struct dma_buf *dmabuf; | 
 | 	unsigned long timeout; | 
 | 	bool cookie, cyclic, dma_to_ram; | 
 | 	long retl; | 
 | 	u32 seqno; | 
 | 	int ret; | 
 |  | 
 | 	if (copy_from_user(&iio_dmabuf, iio_dmabuf_req, sizeof(iio_dmabuf))) | 
 | 		return -EFAULT; | 
 |  | 
 | 	if (iio_dmabuf.flags & ~IIO_BUFFER_DMABUF_SUPPORTED_FLAGS) | 
 | 		return -EINVAL; | 
 |  | 
 | 	cyclic = iio_dmabuf.flags & IIO_BUFFER_DMABUF_CYCLIC; | 
 |  | 
 | 	/* Cyclic flag is only supported on output buffers */ | 
 | 	if (cyclic && buffer->direction != IIO_BUFFER_DIRECTION_OUT) | 
 | 		return -EINVAL; | 
 |  | 
 | 	dmabuf = dma_buf_get(iio_dmabuf.fd); | 
 | 	if (IS_ERR(dmabuf)) | 
 | 		return PTR_ERR(dmabuf); | 
 |  | 
 | 	if (!iio_dmabuf.bytes_used || iio_dmabuf.bytes_used > dmabuf->size) { | 
 | 		ret = -EINVAL; | 
 | 		goto err_dmabuf_put; | 
 | 	} | 
 |  | 
 | 	attach = iio_buffer_find_attachment(ib, dmabuf, nonblock); | 
 | 	if (IS_ERR(attach)) { | 
 | 		ret = PTR_ERR(attach); | 
 | 		goto err_dmabuf_put; | 
 | 	} | 
 |  | 
 | 	priv = attach->importer_priv; | 
 |  | 
 | 	fence = kmalloc(sizeof(*fence), GFP_KERNEL); | 
 | 	if (!fence) { | 
 | 		ret = -ENOMEM; | 
 | 		goto err_attachment_put; | 
 | 	} | 
 |  | 
 | 	fence->priv = priv; | 
 |  | 
 | 	seqno = atomic_add_return(1, &priv->seqno); | 
 |  | 
 | 	/* | 
 | 	 * The transfers are guaranteed to be processed in the order they are | 
 | 	 * enqueued, so we can use a simple incrementing sequence number for | 
 | 	 * the dma_fence. | 
 | 	 */ | 
 | 	dma_fence_init(&fence->base, &iio_buffer_dma_fence_ops, | 
 | 		       &priv->lock, priv->context, seqno); | 
 |  | 
 | 	ret = iio_dma_resv_lock(dmabuf, nonblock); | 
 | 	if (ret) | 
 | 		goto err_fence_put; | 
 |  | 
 | 	timeout = nonblock ? 0 : msecs_to_jiffies(DMABUF_ENQUEUE_TIMEOUT_MS); | 
 | 	dma_to_ram = buffer->direction == IIO_BUFFER_DIRECTION_IN; | 
 |  | 
 | 	/* Make sure we don't have writers */ | 
 | 	retl = dma_resv_wait_timeout(dmabuf->resv, | 
 | 				     dma_resv_usage_rw(dma_to_ram), | 
 | 				     true, timeout); | 
 | 	if (retl == 0) | 
 | 		retl = -EBUSY; | 
 | 	if (retl < 0) { | 
 | 		ret = (int)retl; | 
 | 		goto err_resv_unlock; | 
 | 	} | 
 |  | 
 | 	if (buffer->access->lock_queue) | 
 | 		buffer->access->lock_queue(buffer); | 
 |  | 
 | 	ret = dma_resv_reserve_fences(dmabuf->resv, 1); | 
 | 	if (ret) | 
 | 		goto err_queue_unlock; | 
 |  | 
 | 	dma_resv_add_fence(dmabuf->resv, &fence->base, | 
 | 			   dma_to_ram ? DMA_RESV_USAGE_WRITE : DMA_RESV_USAGE_READ); | 
 | 	dma_resv_unlock(dmabuf->resv); | 
 |  | 
 | 	cookie = dma_fence_begin_signalling(); | 
 |  | 
 | 	ret = buffer->access->enqueue_dmabuf(buffer, priv->block, &fence->base, | 
 | 					     priv->sgt, iio_dmabuf.bytes_used, | 
 | 					     cyclic); | 
 | 	if (ret) { | 
 | 		/* | 
 | 		 * DMABUF enqueue failed, but we already added the fence. | 
 | 		 * Signal the error through the fence completion mechanism. | 
 | 		 */ | 
 | 		iio_buffer_signal_dmabuf_done(&fence->base, ret); | 
 | 	} | 
 |  | 
 | 	if (buffer->access->unlock_queue) | 
 | 		buffer->access->unlock_queue(buffer); | 
 |  | 
 | 	dma_fence_end_signalling(cookie); | 
 | 	dma_buf_put(dmabuf); | 
 |  | 
 | 	return ret; | 
 |  | 
 | err_queue_unlock: | 
 | 	if (buffer->access->unlock_queue) | 
 | 		buffer->access->unlock_queue(buffer); | 
 | err_resv_unlock: | 
 | 	dma_resv_unlock(dmabuf->resv); | 
 | err_fence_put: | 
 | 	dma_fence_put(&fence->base); | 
 | err_attachment_put: | 
 | 	iio_buffer_dmabuf_put(attach); | 
 | err_dmabuf_put: | 
 | 	dma_buf_put(dmabuf); | 
 |  | 
 | 	return ret; | 
 | } | 
 |  | 
 | static void iio_buffer_cleanup(struct work_struct *work) | 
 | { | 
 | 	struct iio_dma_fence *fence = | 
 | 		container_of(work, struct iio_dma_fence, work); | 
 | 	struct iio_dmabuf_priv *priv = fence->priv; | 
 | 	struct dma_buf_attachment *attach = priv->attach; | 
 |  | 
 | 	dma_fence_put(&fence->base); | 
 | 	iio_buffer_dmabuf_put(attach); | 
 | } | 
 |  | 
 | void iio_buffer_signal_dmabuf_done(struct dma_fence *fence, int ret) | 
 | { | 
 | 	struct iio_dma_fence *iio_fence = | 
 | 		container_of(fence, struct iio_dma_fence, base); | 
 | 	bool cookie = dma_fence_begin_signalling(); | 
 |  | 
 | 	/* | 
 | 	 * Get a reference to the fence, so that it's not freed as soon as | 
 | 	 * it's signaled. | 
 | 	 */ | 
 | 	dma_fence_get(fence); | 
 |  | 
 | 	fence->error = ret; | 
 | 	dma_fence_signal(fence); | 
 | 	dma_fence_end_signalling(cookie); | 
 |  | 
 | 	/* | 
 | 	 * The fence will be unref'd in iio_buffer_cleanup. | 
 | 	 * It can't be done here, as the unref functions might try to lock the | 
 | 	 * resv object, which can deadlock. | 
 | 	 */ | 
 | 	INIT_WORK(&iio_fence->work, iio_buffer_cleanup); | 
 | 	schedule_work(&iio_fence->work); | 
 | } | 
 | EXPORT_SYMBOL_GPL(iio_buffer_signal_dmabuf_done); | 
 |  | 
 | static long iio_buffer_chrdev_ioctl(struct file *filp, | 
 | 				    unsigned int cmd, unsigned long arg) | 
 | { | 
 | 	struct iio_dev_buffer_pair *ib = filp->private_data; | 
 | 	void __user *_arg = (void __user *)arg; | 
 | 	bool nonblock = filp->f_flags & O_NONBLOCK; | 
 |  | 
 | 	switch (cmd) { | 
 | 	case IIO_BUFFER_DMABUF_ATTACH_IOCTL: | 
 | 		return iio_buffer_attach_dmabuf(ib, _arg, nonblock); | 
 | 	case IIO_BUFFER_DMABUF_DETACH_IOCTL: | 
 | 		return iio_buffer_detach_dmabuf(ib, _arg, nonblock); | 
 | 	case IIO_BUFFER_DMABUF_ENQUEUE_IOCTL: | 
 | 		return iio_buffer_enqueue_dmabuf(ib, _arg, nonblock); | 
 | 	default: | 
 | 		return -EINVAL; | 
 | 	} | 
 | } | 
 |  | 
 | static const struct file_operations iio_buffer_chrdev_fileops = { | 
 | 	.owner = THIS_MODULE, | 
 | 	.llseek = noop_llseek, | 
 | 	.read = iio_buffer_read, | 
 | 	.write = iio_buffer_write, | 
 | 	.unlocked_ioctl = iio_buffer_chrdev_ioctl, | 
 | 	.compat_ioctl = compat_ptr_ioctl, | 
 | 	.poll = iio_buffer_poll, | 
 | 	.release = iio_buffer_chrdev_release, | 
 | }; | 
 |  | 
 | static long iio_device_buffer_getfd(struct iio_dev *indio_dev, unsigned long arg) | 
 | { | 
 | 	struct iio_dev_opaque *iio_dev_opaque = to_iio_dev_opaque(indio_dev); | 
 | 	int __user *ival = (int __user *)arg; | 
 | 	struct iio_dev_buffer_pair *ib; | 
 | 	struct iio_buffer *buffer; | 
 | 	int fd, idx, ret; | 
 |  | 
 | 	if (copy_from_user(&idx, ival, sizeof(idx))) | 
 | 		return -EFAULT; | 
 |  | 
 | 	if (idx >= iio_dev_opaque->attached_buffers_cnt) | 
 | 		return -ENODEV; | 
 |  | 
 | 	iio_device_get(indio_dev); | 
 |  | 
 | 	buffer = iio_dev_opaque->attached_buffers[idx]; | 
 |  | 
 | 	if (test_and_set_bit(IIO_BUSY_BIT_POS, &buffer->flags)) { | 
 | 		ret = -EBUSY; | 
 | 		goto error_iio_dev_put; | 
 | 	} | 
 |  | 
 | 	ib = kzalloc(sizeof(*ib), GFP_KERNEL); | 
 | 	if (!ib) { | 
 | 		ret = -ENOMEM; | 
 | 		goto error_clear_busy_bit; | 
 | 	} | 
 |  | 
 | 	ib->indio_dev = indio_dev; | 
 | 	ib->buffer = buffer; | 
 |  | 
 | 	fd = anon_inode_getfd("iio:buffer", &iio_buffer_chrdev_fileops, | 
 | 			      ib, O_RDWR | O_CLOEXEC); | 
 | 	if (fd < 0) { | 
 | 		ret = fd; | 
 | 		goto error_free_ib; | 
 | 	} | 
 |  | 
 | 	if (copy_to_user(ival, &fd, sizeof(fd))) { | 
 | 		/* | 
 | 		 * "Leak" the fd, as there's not much we can do about this | 
 | 		 * anyway. 'fd' might have been closed already, as | 
 | 		 * anon_inode_getfd() called fd_install() on it, which made | 
 | 		 * it reachable by userland. | 
 | 		 * | 
 | 		 * Instead of allowing a malicious user to play tricks with | 
 | 		 * us, rely on the process exit path to do any necessary | 
 | 		 * cleanup, as in releasing the file, if still needed. | 
 | 		 */ | 
 | 		return -EFAULT; | 
 | 	} | 
 |  | 
 | 	return 0; | 
 |  | 
 | error_free_ib: | 
 | 	kfree(ib); | 
 | error_clear_busy_bit: | 
 | 	clear_bit(IIO_BUSY_BIT_POS, &buffer->flags); | 
 | error_iio_dev_put: | 
 | 	iio_device_put(indio_dev); | 
 | 	return ret; | 
 | } | 
 |  | 
 | static long iio_device_buffer_ioctl(struct iio_dev *indio_dev, struct file *filp, | 
 | 				    unsigned int cmd, unsigned long arg) | 
 | { | 
 | 	switch (cmd) { | 
 | 	case IIO_BUFFER_GET_FD_IOCTL: | 
 | 		return iio_device_buffer_getfd(indio_dev, arg); | 
 | 	default: | 
 | 		return IIO_IOCTL_UNHANDLED; | 
 | 	} | 
 | } | 
 |  | 
 | static int iio_channel_validate_scan_type(struct device *dev, int ch, | 
 | 					  const struct iio_scan_type *scan_type) | 
 | { | 
 | 	/* Verify that sample bits fit into storage */ | 
 | 	if (scan_type->storagebits < scan_type->realbits + scan_type->shift) { | 
 | 		dev_err(dev, | 
 | 			"Channel %d storagebits (%d) < shifted realbits (%d + %d)\n", | 
 | 			ch, scan_type->storagebits, | 
 | 			scan_type->realbits, | 
 | 			scan_type->shift); | 
 | 		return -EINVAL; | 
 | 	} | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int __iio_buffer_alloc_sysfs_and_mask(struct iio_buffer *buffer, | 
 | 					     struct iio_dev *indio_dev, | 
 | 					     int index) | 
 | { | 
 | 	struct iio_dev_opaque *iio_dev_opaque = to_iio_dev_opaque(indio_dev); | 
 | 	struct iio_dev_attr *p; | 
 | 	const struct iio_dev_attr *id_attr; | 
 | 	struct attribute **attr; | 
 | 	int ret, i, attrn, scan_el_attrcount, buffer_attrcount; | 
 | 	const struct iio_chan_spec *channels; | 
 |  | 
 | 	buffer_attrcount = 0; | 
 | 	if (buffer->attrs) { | 
 | 		while (buffer->attrs[buffer_attrcount]) | 
 | 			buffer_attrcount++; | 
 | 	} | 
 | 	buffer_attrcount += ARRAY_SIZE(iio_buffer_attrs); | 
 |  | 
 | 	scan_el_attrcount = 0; | 
 | 	INIT_LIST_HEAD(&buffer->buffer_attr_list); | 
 | 	channels = indio_dev->channels; | 
 | 	if (channels) { | 
 | 		/* new magic */ | 
 | 		for (i = 0; i < indio_dev->num_channels; i++) { | 
 | 			const struct iio_scan_type *scan_type; | 
 |  | 
 | 			if (channels[i].scan_index < 0) | 
 | 				continue; | 
 |  | 
 | 			if (channels[i].has_ext_scan_type) { | 
 | 				int j; | 
 |  | 
 | 				/* | 
 | 				 * get_current_scan_type is required when using | 
 | 				 * extended scan types. | 
 | 				 */ | 
 | 				if (!indio_dev->info->get_current_scan_type) { | 
 | 					ret = -EINVAL; | 
 | 					goto error_cleanup_dynamic; | 
 | 				} | 
 |  | 
 | 				for (j = 0; j < channels[i].num_ext_scan_type; j++) { | 
 | 					scan_type = &channels[i].ext_scan_type[j]; | 
 |  | 
 | 					ret = iio_channel_validate_scan_type( | 
 | 						&indio_dev->dev, i, scan_type); | 
 | 					if (ret) | 
 | 						goto error_cleanup_dynamic; | 
 | 				} | 
 | 			} else { | 
 | 				scan_type = &channels[i].scan_type; | 
 |  | 
 | 				ret = iio_channel_validate_scan_type( | 
 | 						&indio_dev->dev, i, scan_type); | 
 | 				if (ret) | 
 | 					goto error_cleanup_dynamic; | 
 | 			} | 
 |  | 
 | 			ret = iio_buffer_add_channel_sysfs(indio_dev, buffer, | 
 | 							   &channels[i]); | 
 | 			if (ret < 0) | 
 | 				goto error_cleanup_dynamic; | 
 | 			scan_el_attrcount += ret; | 
 | 			if (channels[i].type == IIO_TIMESTAMP) | 
 | 				iio_dev_opaque->scan_index_timestamp = | 
 | 					channels[i].scan_index; | 
 | 		} | 
 | 		if (indio_dev->masklength && !buffer->scan_mask) { | 
 | 			buffer->scan_mask = bitmap_zalloc(indio_dev->masklength, | 
 | 							  GFP_KERNEL); | 
 | 			if (!buffer->scan_mask) { | 
 | 				ret = -ENOMEM; | 
 | 				goto error_cleanup_dynamic; | 
 | 			} | 
 | 		} | 
 | 	} | 
 |  | 
 | 	attrn = buffer_attrcount + scan_el_attrcount; | 
 | 	attr = kcalloc(attrn + 1, sizeof(*attr), GFP_KERNEL); | 
 | 	if (!attr) { | 
 | 		ret = -ENOMEM; | 
 | 		goto error_free_scan_mask; | 
 | 	} | 
 |  | 
 | 	memcpy(attr, iio_buffer_attrs, sizeof(iio_buffer_attrs)); | 
 | 	if (!buffer->access->set_length) | 
 | 		attr[0] = &dev_attr_length_ro.attr; | 
 |  | 
 | 	if (buffer->access->flags & INDIO_BUFFER_FLAG_FIXED_WATERMARK) | 
 | 		attr[2] = &dev_attr_watermark_ro.attr; | 
 |  | 
 | 	if (buffer->attrs) | 
 | 		for (i = 0, id_attr = buffer->attrs[i]; | 
 | 		     (id_attr = buffer->attrs[i]); i++) | 
 | 			attr[ARRAY_SIZE(iio_buffer_attrs) + i] = | 
 | 				(struct attribute *)&id_attr->dev_attr.attr; | 
 |  | 
 | 	buffer->buffer_group.attrs = attr; | 
 |  | 
 | 	for (i = 0; i < buffer_attrcount; i++) { | 
 | 		struct attribute *wrapped; | 
 |  | 
 | 		wrapped = iio_buffer_wrap_attr(buffer, attr[i]); | 
 | 		if (!wrapped) { | 
 | 			ret = -ENOMEM; | 
 | 			goto error_free_buffer_attrs; | 
 | 		} | 
 | 		attr[i] = wrapped; | 
 | 	} | 
 |  | 
 | 	attrn = 0; | 
 | 	list_for_each_entry(p, &buffer->buffer_attr_list, l) | 
 | 		attr[attrn++] = &p->dev_attr.attr; | 
 |  | 
 | 	buffer->buffer_group.name = kasprintf(GFP_KERNEL, "buffer%d", index); | 
 | 	if (!buffer->buffer_group.name) { | 
 | 		ret = -ENOMEM; | 
 | 		goto error_free_buffer_attrs; | 
 | 	} | 
 |  | 
 | 	ret = iio_device_register_sysfs_group(indio_dev, &buffer->buffer_group); | 
 | 	if (ret) | 
 | 		goto error_free_buffer_attr_group_name; | 
 |  | 
 | 	/* we only need to register the legacy groups for the first buffer */ | 
 | 	if (index > 0) | 
 | 		return 0; | 
 |  | 
 | 	ret = iio_buffer_register_legacy_sysfs_groups(indio_dev, attr, | 
 | 						      buffer_attrcount, | 
 | 						      scan_el_attrcount); | 
 | 	if (ret) | 
 | 		goto error_free_buffer_attr_group_name; | 
 |  | 
 | 	return 0; | 
 |  | 
 | error_free_buffer_attr_group_name: | 
 | 	kfree(buffer->buffer_group.name); | 
 | error_free_buffer_attrs: | 
 | 	kfree(buffer->buffer_group.attrs); | 
 | error_free_scan_mask: | 
 | 	bitmap_free(buffer->scan_mask); | 
 | error_cleanup_dynamic: | 
 | 	iio_free_chan_devattr_list(&buffer->buffer_attr_list); | 
 |  | 
 | 	return ret; | 
 | } | 
 |  | 
 | static void __iio_buffer_free_sysfs_and_mask(struct iio_buffer *buffer, | 
 | 					     struct iio_dev *indio_dev, | 
 | 					     int index) | 
 | { | 
 | 	if (index == 0) | 
 | 		iio_buffer_unregister_legacy_sysfs_groups(indio_dev); | 
 | 	bitmap_free(buffer->scan_mask); | 
 | 	kfree(buffer->buffer_group.name); | 
 | 	kfree(buffer->buffer_group.attrs); | 
 | 	iio_free_chan_devattr_list(&buffer->buffer_attr_list); | 
 | } | 
 |  | 
 | int iio_buffers_alloc_sysfs_and_mask(struct iio_dev *indio_dev) | 
 | { | 
 | 	struct iio_dev_opaque *iio_dev_opaque = to_iio_dev_opaque(indio_dev); | 
 | 	const struct iio_chan_spec *channels; | 
 | 	struct iio_buffer *buffer; | 
 | 	int ret, i, idx; | 
 | 	size_t sz; | 
 |  | 
 | 	channels = indio_dev->channels; | 
 | 	if (channels) { | 
 | 		int ml = 0; | 
 |  | 
 | 		for (i = 0; i < indio_dev->num_channels; i++) | 
 | 			ml = max(ml, channels[i].scan_index + 1); | 
 | 		indio_dev->masklength = ml; | 
 | 	} | 
 |  | 
 | 	if (!iio_dev_opaque->attached_buffers_cnt) | 
 | 		return 0; | 
 |  | 
 | 	for (idx = 0; idx < iio_dev_opaque->attached_buffers_cnt; idx++) { | 
 | 		buffer = iio_dev_opaque->attached_buffers[idx]; | 
 | 		ret = __iio_buffer_alloc_sysfs_and_mask(buffer, indio_dev, idx); | 
 | 		if (ret) | 
 | 			goto error_unwind_sysfs_and_mask; | 
 | 	} | 
 |  | 
 | 	sz = sizeof(*iio_dev_opaque->buffer_ioctl_handler); | 
 | 	iio_dev_opaque->buffer_ioctl_handler = kzalloc(sz, GFP_KERNEL); | 
 | 	if (!iio_dev_opaque->buffer_ioctl_handler) { | 
 | 		ret = -ENOMEM; | 
 | 		goto error_unwind_sysfs_and_mask; | 
 | 	} | 
 |  | 
 | 	iio_dev_opaque->buffer_ioctl_handler->ioctl = iio_device_buffer_ioctl; | 
 | 	iio_device_ioctl_handler_register(indio_dev, | 
 | 					  iio_dev_opaque->buffer_ioctl_handler); | 
 |  | 
 | 	return 0; | 
 |  | 
 | error_unwind_sysfs_and_mask: | 
 | 	while (idx--) { | 
 | 		buffer = iio_dev_opaque->attached_buffers[idx]; | 
 | 		__iio_buffer_free_sysfs_and_mask(buffer, indio_dev, idx); | 
 | 	} | 
 | 	return ret; | 
 | } | 
 |  | 
 | void iio_buffers_free_sysfs_and_mask(struct iio_dev *indio_dev) | 
 | { | 
 | 	struct iio_dev_opaque *iio_dev_opaque = to_iio_dev_opaque(indio_dev); | 
 | 	struct iio_buffer *buffer; | 
 | 	int i; | 
 |  | 
 | 	if (!iio_dev_opaque->attached_buffers_cnt) | 
 | 		return; | 
 |  | 
 | 	iio_device_ioctl_handler_unregister(iio_dev_opaque->buffer_ioctl_handler); | 
 | 	kfree(iio_dev_opaque->buffer_ioctl_handler); | 
 |  | 
 | 	for (i = iio_dev_opaque->attached_buffers_cnt - 1; i >= 0; i--) { | 
 | 		buffer = iio_dev_opaque->attached_buffers[i]; | 
 | 		__iio_buffer_free_sysfs_and_mask(buffer, indio_dev, i); | 
 | 	} | 
 | } | 
 |  | 
 | /** | 
 |  * iio_validate_scan_mask_onehot() - Validates that exactly one channel is selected | 
 |  * @indio_dev: the iio device | 
 |  * @mask: scan mask to be checked | 
 |  * | 
 |  * Return true if exactly one bit is set in the scan mask, false otherwise. It | 
 |  * can be used for devices where only one channel can be active for sampling at | 
 |  * a time. | 
 |  */ | 
 | bool iio_validate_scan_mask_onehot(struct iio_dev *indio_dev, | 
 | 				   const unsigned long *mask) | 
 | { | 
 | 	return bitmap_weight(mask, indio_dev->masklength) == 1; | 
 | } | 
 | EXPORT_SYMBOL_GPL(iio_validate_scan_mask_onehot); | 
 |  | 
 | static const void *iio_demux(struct iio_buffer *buffer, | 
 | 			     const void *datain) | 
 | { | 
 | 	struct iio_demux_table *t; | 
 |  | 
 | 	if (list_empty(&buffer->demux_list)) | 
 | 		return datain; | 
 | 	list_for_each_entry(t, &buffer->demux_list, l) | 
 | 		memcpy(buffer->demux_bounce + t->to, | 
 | 		       datain + t->from, t->length); | 
 |  | 
 | 	return buffer->demux_bounce; | 
 | } | 
 |  | 
 | static int iio_push_to_buffer(struct iio_buffer *buffer, const void *data) | 
 | { | 
 | 	const void *dataout = iio_demux(buffer, data); | 
 | 	int ret; | 
 |  | 
 | 	ret = buffer->access->store_to(buffer, dataout); | 
 | 	if (ret) | 
 | 		return ret; | 
 |  | 
 | 	/* | 
 | 	 * We can't just test for watermark to decide if we wake the poll queue | 
 | 	 * because read may request less samples than the watermark. | 
 | 	 */ | 
 | 	wake_up_interruptible_poll(&buffer->pollq, EPOLLIN | EPOLLRDNORM); | 
 | 	return 0; | 
 | } | 
 |  | 
 | /** | 
 |  * iio_push_to_buffers() - push to a registered buffer. | 
 |  * @indio_dev:		iio_dev structure for device. | 
 |  * @data:		Full scan. | 
 |  */ | 
 | int iio_push_to_buffers(struct iio_dev *indio_dev, const void *data) | 
 | { | 
 | 	struct iio_dev_opaque *iio_dev_opaque = to_iio_dev_opaque(indio_dev); | 
 | 	int ret; | 
 | 	struct iio_buffer *buf; | 
 |  | 
 | 	list_for_each_entry(buf, &iio_dev_opaque->buffer_list, buffer_list) { | 
 | 		ret = iio_push_to_buffer(buf, data); | 
 | 		if (ret < 0) | 
 | 			return ret; | 
 | 	} | 
 |  | 
 | 	return 0; | 
 | } | 
 | EXPORT_SYMBOL_GPL(iio_push_to_buffers); | 
 |  | 
 | /** | 
 |  * iio_push_to_buffers_with_ts_unaligned() - push to registered buffer, | 
 |  *    no alignment or space requirements. | 
 |  * @indio_dev:		iio_dev structure for device. | 
 |  * @data:		channel data excluding the timestamp. | 
 |  * @data_sz:		size of data. | 
 |  * @timestamp:		timestamp for the sample data. | 
 |  * | 
 |  * This special variant of iio_push_to_buffers_with_timestamp() does | 
 |  * not require space for the timestamp, or 8 byte alignment of data. | 
 |  * It does however require an allocation on first call and additional | 
 |  * copies on all calls, so should be avoided if possible. | 
 |  */ | 
 | int iio_push_to_buffers_with_ts_unaligned(struct iio_dev *indio_dev, | 
 | 					  const void *data, | 
 | 					  size_t data_sz, | 
 | 					  int64_t timestamp) | 
 | { | 
 | 	struct iio_dev_opaque *iio_dev_opaque = to_iio_dev_opaque(indio_dev); | 
 |  | 
 | 	/* | 
 | 	 * Conservative estimate - we can always safely copy the minimum | 
 | 	 * of either the data provided or the length of the destination buffer. | 
 | 	 * This relaxed limit allows the calling drivers to be lax about | 
 | 	 * tracking the size of the data they are pushing, at the cost of | 
 | 	 * unnecessary copying of padding. | 
 | 	 */ | 
 | 	data_sz = min_t(size_t, indio_dev->scan_bytes, data_sz); | 
 | 	if (iio_dev_opaque->bounce_buffer_size !=  indio_dev->scan_bytes) { | 
 | 		void *bb; | 
 |  | 
 | 		bb = devm_krealloc(&indio_dev->dev, | 
 | 				   iio_dev_opaque->bounce_buffer, | 
 | 				   indio_dev->scan_bytes, GFP_KERNEL); | 
 | 		if (!bb) | 
 | 			return -ENOMEM; | 
 | 		iio_dev_opaque->bounce_buffer = bb; | 
 | 		iio_dev_opaque->bounce_buffer_size = indio_dev->scan_bytes; | 
 | 	} | 
 | 	memcpy(iio_dev_opaque->bounce_buffer, data, data_sz); | 
 | 	return iio_push_to_buffers_with_timestamp(indio_dev, | 
 | 						  iio_dev_opaque->bounce_buffer, | 
 | 						  timestamp); | 
 | } | 
 | EXPORT_SYMBOL_GPL(iio_push_to_buffers_with_ts_unaligned); | 
 |  | 
 | /** | 
 |  * iio_buffer_release() - Free a buffer's resources | 
 |  * @ref: Pointer to the kref embedded in the iio_buffer struct | 
 |  * | 
 |  * This function is called when the last reference to the buffer has been | 
 |  * dropped. It will typically free all resources allocated by the buffer. Do not | 
 |  * call this function manually, always use iio_buffer_put() when done using a | 
 |  * buffer. | 
 |  */ | 
 | static void iio_buffer_release(struct kref *ref) | 
 | { | 
 | 	struct iio_buffer *buffer = container_of(ref, struct iio_buffer, ref); | 
 |  | 
 | 	mutex_destroy(&buffer->dmabufs_mutex); | 
 | 	buffer->access->release(buffer); | 
 | } | 
 |  | 
 | /** | 
 |  * iio_buffer_get() - Grab a reference to the buffer | 
 |  * @buffer: The buffer to grab a reference for, may be NULL | 
 |  * | 
 |  * Returns the pointer to the buffer that was passed into the function. | 
 |  */ | 
 | struct iio_buffer *iio_buffer_get(struct iio_buffer *buffer) | 
 | { | 
 | 	if (buffer) | 
 | 		kref_get(&buffer->ref); | 
 |  | 
 | 	return buffer; | 
 | } | 
 | EXPORT_SYMBOL_GPL(iio_buffer_get); | 
 |  | 
 | /** | 
 |  * iio_buffer_put() - Release the reference to the buffer | 
 |  * @buffer: The buffer to release the reference for, may be NULL | 
 |  */ | 
 | void iio_buffer_put(struct iio_buffer *buffer) | 
 | { | 
 | 	if (buffer) | 
 | 		kref_put(&buffer->ref, iio_buffer_release); | 
 | } | 
 | EXPORT_SYMBOL_GPL(iio_buffer_put); | 
 |  | 
 | /** | 
 |  * iio_device_attach_buffer - Attach a buffer to a IIO device | 
 |  * @indio_dev: The device the buffer should be attached to | 
 |  * @buffer: The buffer to attach to the device | 
 |  * | 
 |  * Return 0 if successful, negative if error. | 
 |  * | 
 |  * This function attaches a buffer to a IIO device. The buffer stays attached to | 
 |  * the device until the device is freed. For legacy reasons, the first attached | 
 |  * buffer will also be assigned to 'indio_dev->buffer'. | 
 |  * The array allocated here, will be free'd via the iio_device_detach_buffers() | 
 |  * call which is handled by the iio_device_free(). | 
 |  */ | 
 | int iio_device_attach_buffer(struct iio_dev *indio_dev, | 
 | 			     struct iio_buffer *buffer) | 
 | { | 
 | 	struct iio_dev_opaque *iio_dev_opaque = to_iio_dev_opaque(indio_dev); | 
 | 	struct iio_buffer **new, **old = iio_dev_opaque->attached_buffers; | 
 | 	unsigned int cnt = iio_dev_opaque->attached_buffers_cnt; | 
 |  | 
 | 	cnt++; | 
 |  | 
 | 	new = krealloc(old, sizeof(*new) * cnt, GFP_KERNEL); | 
 | 	if (!new) | 
 | 		return -ENOMEM; | 
 | 	iio_dev_opaque->attached_buffers = new; | 
 |  | 
 | 	buffer = iio_buffer_get(buffer); | 
 |  | 
 | 	/* first buffer is legacy; attach it to the IIO device directly */ | 
 | 	if (!indio_dev->buffer) | 
 | 		indio_dev->buffer = buffer; | 
 |  | 
 | 	iio_dev_opaque->attached_buffers[cnt - 1] = buffer; | 
 | 	iio_dev_opaque->attached_buffers_cnt = cnt; | 
 |  | 
 | 	return 0; | 
 | } | 
 | EXPORT_SYMBOL_GPL(iio_device_attach_buffer); |