| // SPDX-License-Identifier: GPL-2.0 | 
 | /* | 
 |  * USB Attached SCSI | 
 |  * Note that this is not the same as the USB Mass Storage driver | 
 |  * | 
 |  * Copyright Hans de Goede <hdegoede@redhat.com> for Red Hat, Inc. 2013 - 2016 | 
 |  * Copyright Matthew Wilcox for Intel Corp, 2010 | 
 |  * Copyright Sarah Sharp for Intel Corp, 2010 | 
 |  */ | 
 |  | 
 | #include <linux/blkdev.h> | 
 | #include <linux/slab.h> | 
 | #include <linux/types.h> | 
 | #include <linux/module.h> | 
 | #include <linux/usb.h> | 
 | #include <linux/usb_usual.h> | 
 | #include <linux/usb/hcd.h> | 
 | #include <linux/usb/storage.h> | 
 | #include <linux/usb/uas.h> | 
 |  | 
 | #include <scsi/scsi.h> | 
 | #include <scsi/scsi_eh.h> | 
 | #include <scsi/scsi_dbg.h> | 
 | #include <scsi/scsi_devinfo.h> | 
 | #include <scsi/scsi_cmnd.h> | 
 | #include <scsi/scsi_device.h> | 
 | #include <scsi/scsi_host.h> | 
 | #include <scsi/scsi_tcq.h> | 
 |  | 
 | #include "uas-detect.h" | 
 | #include "scsiglue.h" | 
 |  | 
 | #define MAX_CMNDS 256 | 
 |  | 
 | struct uas_dev_info { | 
 | 	struct usb_interface *intf; | 
 | 	struct usb_device *udev; | 
 | 	struct usb_anchor cmd_urbs; | 
 | 	struct usb_anchor sense_urbs; | 
 | 	struct usb_anchor data_urbs; | 
 | 	u64 flags; | 
 | 	int qdepth, resetting; | 
 | 	unsigned cmd_pipe, status_pipe, data_in_pipe, data_out_pipe; | 
 | 	unsigned use_streams:1; | 
 | 	unsigned shutdown:1; | 
 | 	struct scsi_cmnd *cmnd[MAX_CMNDS]; | 
 | 	spinlock_t lock; | 
 | 	struct work_struct work; | 
 | 	struct work_struct scan_work;      /* for async scanning */ | 
 | }; | 
 |  | 
 | enum { | 
 | 	SUBMIT_STATUS_URB	= BIT(1), | 
 | 	ALLOC_DATA_IN_URB	= BIT(2), | 
 | 	SUBMIT_DATA_IN_URB	= BIT(3), | 
 | 	ALLOC_DATA_OUT_URB	= BIT(4), | 
 | 	SUBMIT_DATA_OUT_URB	= BIT(5), | 
 | 	ALLOC_CMD_URB		= BIT(6), | 
 | 	SUBMIT_CMD_URB		= BIT(7), | 
 | 	COMMAND_INFLIGHT        = BIT(8), | 
 | 	DATA_IN_URB_INFLIGHT    = BIT(9), | 
 | 	DATA_OUT_URB_INFLIGHT   = BIT(10), | 
 | 	COMMAND_ABORTED         = BIT(11), | 
 | 	IS_IN_WORK_LIST         = BIT(12), | 
 | }; | 
 |  | 
 | /* Overrides scsi_pointer */ | 
 | struct uas_cmd_info { | 
 | 	unsigned int state; | 
 | 	unsigned int uas_tag; | 
 | 	struct urb *cmd_urb; | 
 | 	struct urb *data_in_urb; | 
 | 	struct urb *data_out_urb; | 
 | }; | 
 |  | 
 | /* I hate forward declarations, but I actually have a loop */ | 
 | static int uas_submit_urbs(struct scsi_cmnd *cmnd, | 
 | 				struct uas_dev_info *devinfo); | 
 | static void uas_do_work(struct work_struct *work); | 
 | static int uas_try_complete(struct scsi_cmnd *cmnd, const char *caller); | 
 | static void uas_free_streams(struct uas_dev_info *devinfo); | 
 | static void uas_log_cmd_state(struct scsi_cmnd *cmnd, const char *prefix, | 
 | 				int status); | 
 |  | 
 | /* | 
 |  * This driver needs its own workqueue, as we need to control memory allocation. | 
 |  * | 
 |  * In the course of error handling and power management uas_wait_for_pending_cmnds() | 
 |  * needs to flush pending work items. In these contexts we cannot allocate memory | 
 |  * by doing block IO as we would deadlock. For the same reason we cannot wait | 
 |  * for anything allocating memory not heeding these constraints. | 
 |  * | 
 |  * So we have to control all work items that can be on the workqueue we flush. | 
 |  * Hence we cannot share a queue and need our own. | 
 |  */ | 
 | static struct workqueue_struct *workqueue; | 
 |  | 
 | static void uas_do_work(struct work_struct *work) | 
 | { | 
 | 	struct uas_dev_info *devinfo = | 
 | 		container_of(work, struct uas_dev_info, work); | 
 | 	struct uas_cmd_info *cmdinfo; | 
 | 	struct scsi_cmnd *cmnd; | 
 | 	unsigned long flags; | 
 | 	int i, err; | 
 |  | 
 | 	spin_lock_irqsave(&devinfo->lock, flags); | 
 |  | 
 | 	if (devinfo->resetting) | 
 | 		goto out; | 
 |  | 
 | 	for (i = 0; i < devinfo->qdepth; i++) { | 
 | 		if (!devinfo->cmnd[i]) | 
 | 			continue; | 
 |  | 
 | 		cmnd = devinfo->cmnd[i]; | 
 | 		cmdinfo = scsi_cmd_priv(cmnd); | 
 |  | 
 | 		if (!(cmdinfo->state & IS_IN_WORK_LIST)) | 
 | 			continue; | 
 |  | 
 | 		err = uas_submit_urbs(cmnd, cmnd->device->hostdata); | 
 | 		if (!err) | 
 | 			cmdinfo->state &= ~IS_IN_WORK_LIST; | 
 | 		else | 
 | 			queue_work(workqueue, &devinfo->work); | 
 | 	} | 
 | out: | 
 | 	spin_unlock_irqrestore(&devinfo->lock, flags); | 
 | } | 
 |  | 
 | static void uas_scan_work(struct work_struct *work) | 
 | { | 
 | 	struct uas_dev_info *devinfo = | 
 | 		container_of(work, struct uas_dev_info, scan_work); | 
 | 	struct Scsi_Host *shost = usb_get_intfdata(devinfo->intf); | 
 |  | 
 | 	dev_dbg(&devinfo->intf->dev, "starting scan\n"); | 
 | 	scsi_scan_host(shost); | 
 | 	dev_dbg(&devinfo->intf->dev, "scan complete\n"); | 
 | } | 
 |  | 
 | static void uas_add_work(struct scsi_cmnd *cmnd) | 
 | { | 
 | 	struct uas_cmd_info *cmdinfo = scsi_cmd_priv(cmnd); | 
 | 	struct uas_dev_info *devinfo = cmnd->device->hostdata; | 
 |  | 
 | 	lockdep_assert_held(&devinfo->lock); | 
 | 	cmdinfo->state |= IS_IN_WORK_LIST; | 
 | 	queue_work(workqueue, &devinfo->work); | 
 | } | 
 |  | 
 | static void uas_zap_pending(struct uas_dev_info *devinfo, int result) | 
 | { | 
 | 	struct uas_cmd_info *cmdinfo; | 
 | 	struct scsi_cmnd *cmnd; | 
 | 	unsigned long flags; | 
 | 	int i, err; | 
 |  | 
 | 	spin_lock_irqsave(&devinfo->lock, flags); | 
 | 	for (i = 0; i < devinfo->qdepth; i++) { | 
 | 		if (!devinfo->cmnd[i]) | 
 | 			continue; | 
 |  | 
 | 		cmnd = devinfo->cmnd[i]; | 
 | 		cmdinfo = scsi_cmd_priv(cmnd); | 
 | 		uas_log_cmd_state(cmnd, __func__, 0); | 
 | 		/* Sense urbs were killed, clear COMMAND_INFLIGHT manually */ | 
 | 		cmdinfo->state &= ~COMMAND_INFLIGHT; | 
 | 		cmnd->result = result << 16; | 
 | 		err = uas_try_complete(cmnd, __func__); | 
 | 		WARN_ON(err != 0); | 
 | 	} | 
 | 	spin_unlock_irqrestore(&devinfo->lock, flags); | 
 | } | 
 |  | 
 | static void uas_sense(struct urb *urb, struct scsi_cmnd *cmnd) | 
 | { | 
 | 	struct sense_iu *sense_iu = urb->transfer_buffer; | 
 | 	struct scsi_device *sdev = cmnd->device; | 
 |  | 
 | 	if (urb->actual_length > 16) { | 
 | 		unsigned len = be16_to_cpup(&sense_iu->len); | 
 | 		if (len + 16 != urb->actual_length) { | 
 | 			int newlen = min(len + 16, urb->actual_length) - 16; | 
 | 			if (newlen < 0) | 
 | 				newlen = 0; | 
 | 			sdev_printk(KERN_INFO, sdev, "%s: urb length %d " | 
 | 				"disagrees with IU sense data length %d, " | 
 | 				"using %d bytes of sense data\n", __func__, | 
 | 					urb->actual_length, len, newlen); | 
 | 			len = newlen; | 
 | 		} | 
 | 		memcpy(cmnd->sense_buffer, sense_iu->sense, len); | 
 | 	} | 
 |  | 
 | 	cmnd->result = sense_iu->status; | 
 | } | 
 |  | 
 | static void uas_log_cmd_state(struct scsi_cmnd *cmnd, const char *prefix, | 
 | 			      int status) | 
 | { | 
 | 	struct uas_cmd_info *ci = scsi_cmd_priv(cmnd); | 
 |  | 
 | 	if (status == -ENODEV) /* too late */ | 
 | 		return; | 
 |  | 
 | 	scmd_printk(KERN_INFO, cmnd, | 
 | 		    "%s %d uas-tag %d inflight:%s%s%s%s%s%s%s%s%s%s%s%s ", | 
 | 		    prefix, status, ci->uas_tag, | 
 | 		    (ci->state & SUBMIT_STATUS_URB)     ? " s-st"  : "", | 
 | 		    (ci->state & ALLOC_DATA_IN_URB)     ? " a-in"  : "", | 
 | 		    (ci->state & SUBMIT_DATA_IN_URB)    ? " s-in"  : "", | 
 | 		    (ci->state & ALLOC_DATA_OUT_URB)    ? " a-out" : "", | 
 | 		    (ci->state & SUBMIT_DATA_OUT_URB)   ? " s-out" : "", | 
 | 		    (ci->state & ALLOC_CMD_URB)         ? " a-cmd" : "", | 
 | 		    (ci->state & SUBMIT_CMD_URB)        ? " s-cmd" : "", | 
 | 		    (ci->state & COMMAND_INFLIGHT)      ? " CMD"   : "", | 
 | 		    (ci->state & DATA_IN_URB_INFLIGHT)  ? " IN"    : "", | 
 | 		    (ci->state & DATA_OUT_URB_INFLIGHT) ? " OUT"   : "", | 
 | 		    (ci->state & COMMAND_ABORTED)       ? " abort" : "", | 
 | 		    (ci->state & IS_IN_WORK_LIST)       ? " work"  : ""); | 
 | 	scsi_print_command(cmnd); | 
 | } | 
 |  | 
 | static void uas_free_unsubmitted_urbs(struct scsi_cmnd *cmnd) | 
 | { | 
 | 	struct uas_cmd_info *cmdinfo; | 
 |  | 
 | 	if (!cmnd) | 
 | 		return; | 
 |  | 
 | 	cmdinfo = scsi_cmd_priv(cmnd); | 
 |  | 
 | 	if (cmdinfo->state & SUBMIT_CMD_URB) | 
 | 		usb_free_urb(cmdinfo->cmd_urb); | 
 |  | 
 | 	/* data urbs may have never gotten their submit flag set */ | 
 | 	if (!(cmdinfo->state & DATA_IN_URB_INFLIGHT)) | 
 | 		usb_free_urb(cmdinfo->data_in_urb); | 
 | 	if (!(cmdinfo->state & DATA_OUT_URB_INFLIGHT)) | 
 | 		usb_free_urb(cmdinfo->data_out_urb); | 
 | } | 
 |  | 
 | static int uas_try_complete(struct scsi_cmnd *cmnd, const char *caller) | 
 | { | 
 | 	struct uas_cmd_info *cmdinfo = scsi_cmd_priv(cmnd); | 
 | 	struct uas_dev_info *devinfo = (void *)cmnd->device->hostdata; | 
 |  | 
 | 	lockdep_assert_held(&devinfo->lock); | 
 | 	if (cmdinfo->state & (COMMAND_INFLIGHT | | 
 | 			      DATA_IN_URB_INFLIGHT | | 
 | 			      DATA_OUT_URB_INFLIGHT | | 
 | 			      COMMAND_ABORTED)) | 
 | 		return -EBUSY; | 
 | 	devinfo->cmnd[cmdinfo->uas_tag - 1] = NULL; | 
 | 	uas_free_unsubmitted_urbs(cmnd); | 
 | 	scsi_done(cmnd); | 
 | 	return 0; | 
 | } | 
 |  | 
 | static void uas_xfer_data(struct urb *urb, struct scsi_cmnd *cmnd, | 
 | 			  unsigned direction) | 
 | { | 
 | 	struct uas_cmd_info *cmdinfo = scsi_cmd_priv(cmnd); | 
 | 	int err; | 
 |  | 
 | 	cmdinfo->state |= direction | SUBMIT_STATUS_URB; | 
 | 	err = uas_submit_urbs(cmnd, cmnd->device->hostdata); | 
 | 	if (err) { | 
 | 		uas_add_work(cmnd); | 
 | 	} | 
 | } | 
 |  | 
 | static bool uas_evaluate_response_iu(struct response_iu *riu, struct scsi_cmnd *cmnd) | 
 | { | 
 | 	u8 response_code = riu->response_code; | 
 |  | 
 | 	switch (response_code) { | 
 | 	case RC_INCORRECT_LUN: | 
 | 		set_host_byte(cmnd, DID_BAD_TARGET); | 
 | 		break; | 
 | 	case RC_TMF_SUCCEEDED: | 
 | 		set_host_byte(cmnd, DID_OK); | 
 | 		break; | 
 | 	case RC_TMF_NOT_SUPPORTED: | 
 | 		set_host_byte(cmnd, DID_BAD_TARGET); | 
 | 		break; | 
 | 	default: | 
 | 		uas_log_cmd_state(cmnd, "response iu", response_code); | 
 | 		set_host_byte(cmnd, DID_ERROR); | 
 | 		break; | 
 | 	} | 
 |  | 
 | 	return response_code == RC_TMF_SUCCEEDED; | 
 | } | 
 |  | 
 | static void uas_stat_cmplt(struct urb *urb) | 
 | { | 
 | 	struct iu *iu = urb->transfer_buffer; | 
 | 	struct Scsi_Host *shost = urb->context; | 
 | 	struct uas_dev_info *devinfo = (struct uas_dev_info *)shost->hostdata; | 
 | 	struct urb *data_in_urb = NULL; | 
 | 	struct urb *data_out_urb = NULL; | 
 | 	struct scsi_cmnd *cmnd; | 
 | 	struct uas_cmd_info *cmdinfo; | 
 | 	unsigned long flags; | 
 | 	unsigned int idx; | 
 | 	int status = urb->status; | 
 | 	bool success; | 
 |  | 
 | 	spin_lock_irqsave(&devinfo->lock, flags); | 
 |  | 
 | 	if (devinfo->resetting) | 
 | 		goto out; | 
 |  | 
 | 	if (status) { | 
 | 		if (status != -ENOENT && status != -ECONNRESET && status != -ESHUTDOWN) | 
 | 			dev_err(&urb->dev->dev, "stat urb: status %d\n", status); | 
 | 		goto out; | 
 | 	} | 
 |  | 
 | 	idx = be16_to_cpup(&iu->tag) - 1; | 
 | 	if (idx >= MAX_CMNDS || !devinfo->cmnd[idx]) { | 
 | 		dev_err(&urb->dev->dev, | 
 | 			"stat urb: no pending cmd for uas-tag %d\n", idx + 1); | 
 | 		goto out; | 
 | 	} | 
 |  | 
 | 	cmnd = devinfo->cmnd[idx]; | 
 | 	cmdinfo = scsi_cmd_priv(cmnd); | 
 |  | 
 | 	if (!(cmdinfo->state & COMMAND_INFLIGHT)) { | 
 | 		uas_log_cmd_state(cmnd, "unexpected status cmplt", 0); | 
 | 		goto out; | 
 | 	} | 
 |  | 
 | 	switch (iu->iu_id) { | 
 | 	case IU_ID_STATUS: | 
 | 		uas_sense(urb, cmnd); | 
 | 		if (cmnd->result != 0) { | 
 | 			/* cancel data transfers on error */ | 
 | 			data_in_urb = usb_get_urb(cmdinfo->data_in_urb); | 
 | 			data_out_urb = usb_get_urb(cmdinfo->data_out_urb); | 
 | 		} | 
 | 		cmdinfo->state &= ~COMMAND_INFLIGHT; | 
 | 		uas_try_complete(cmnd, __func__); | 
 | 		break; | 
 | 	case IU_ID_READ_READY: | 
 | 		if (!cmdinfo->data_in_urb || | 
 | 				(cmdinfo->state & DATA_IN_URB_INFLIGHT)) { | 
 | 			uas_log_cmd_state(cmnd, "unexpected read rdy", 0); | 
 | 			break; | 
 | 		} | 
 | 		uas_xfer_data(urb, cmnd, SUBMIT_DATA_IN_URB); | 
 | 		break; | 
 | 	case IU_ID_WRITE_READY: | 
 | 		if (!cmdinfo->data_out_urb || | 
 | 				(cmdinfo->state & DATA_OUT_URB_INFLIGHT)) { | 
 | 			uas_log_cmd_state(cmnd, "unexpected write rdy", 0); | 
 | 			break; | 
 | 		} | 
 | 		uas_xfer_data(urb, cmnd, SUBMIT_DATA_OUT_URB); | 
 | 		break; | 
 | 	case IU_ID_RESPONSE: | 
 | 		cmdinfo->state &= ~COMMAND_INFLIGHT; | 
 | 		success = uas_evaluate_response_iu((struct response_iu *)iu, cmnd); | 
 | 		if (!success) { | 
 | 			/* Error, cancel data transfers */ | 
 | 			data_in_urb = usb_get_urb(cmdinfo->data_in_urb); | 
 | 			data_out_urb = usb_get_urb(cmdinfo->data_out_urb); | 
 | 		} | 
 | 		uas_try_complete(cmnd, __func__); | 
 | 		break; | 
 | 	default: | 
 | 		uas_log_cmd_state(cmnd, "bogus IU", iu->iu_id); | 
 | 	} | 
 | out: | 
 | 	usb_free_urb(urb); | 
 | 	spin_unlock_irqrestore(&devinfo->lock, flags); | 
 |  | 
 | 	/* Unlinking of data urbs must be done without holding the lock */ | 
 | 	if (data_in_urb) { | 
 | 		usb_unlink_urb(data_in_urb); | 
 | 		usb_put_urb(data_in_urb); | 
 | 	} | 
 | 	if (data_out_urb) { | 
 | 		usb_unlink_urb(data_out_urb); | 
 | 		usb_put_urb(data_out_urb); | 
 | 	} | 
 | } | 
 |  | 
 | static void uas_data_cmplt(struct urb *urb) | 
 | { | 
 | 	struct scsi_cmnd *cmnd = urb->context; | 
 | 	struct uas_cmd_info *cmdinfo = scsi_cmd_priv(cmnd); | 
 | 	struct uas_dev_info *devinfo = (void *)cmnd->device->hostdata; | 
 | 	struct scsi_data_buffer *sdb = &cmnd->sdb; | 
 | 	unsigned long flags; | 
 | 	int status = urb->status; | 
 |  | 
 | 	spin_lock_irqsave(&devinfo->lock, flags); | 
 |  | 
 | 	if (cmdinfo->data_in_urb == urb) { | 
 | 		cmdinfo->state &= ~DATA_IN_URB_INFLIGHT; | 
 | 		cmdinfo->data_in_urb = NULL; | 
 | 	} else if (cmdinfo->data_out_urb == urb) { | 
 | 		cmdinfo->state &= ~DATA_OUT_URB_INFLIGHT; | 
 | 		cmdinfo->data_out_urb = NULL; | 
 | 	} | 
 |  | 
 | 	if (devinfo->resetting) | 
 | 		goto out; | 
 |  | 
 | 	/* Data urbs should not complete before the cmd urb is submitted */ | 
 | 	if (cmdinfo->state & SUBMIT_CMD_URB) { | 
 | 		uas_log_cmd_state(cmnd, "unexpected data cmplt", 0); | 
 | 		goto out; | 
 | 	} | 
 |  | 
 | 	if (status) { | 
 | 		if (status != -ENOENT && status != -ECONNRESET && status != -ESHUTDOWN) | 
 | 			uas_log_cmd_state(cmnd, "data cmplt err", status); | 
 | 		/* error: no data transfered */ | 
 | 		scsi_set_resid(cmnd, sdb->length); | 
 | 		set_host_byte(cmnd, DID_ERROR); | 
 | 	} else { | 
 | 		scsi_set_resid(cmnd, sdb->length - urb->actual_length); | 
 | 	} | 
 | 	uas_try_complete(cmnd, __func__); | 
 | out: | 
 | 	usb_free_urb(urb); | 
 | 	spin_unlock_irqrestore(&devinfo->lock, flags); | 
 | } | 
 |  | 
 | static void uas_cmd_cmplt(struct urb *urb) | 
 | { | 
 | 	if (urb->status) | 
 | 		dev_err(&urb->dev->dev, "cmd cmplt err %d\n", urb->status); | 
 |  | 
 | 	usb_free_urb(urb); | 
 | } | 
 |  | 
 | static struct urb *uas_alloc_data_urb(struct uas_dev_info *devinfo, gfp_t gfp, | 
 | 				      struct scsi_cmnd *cmnd, | 
 | 				      enum dma_data_direction dir) | 
 | { | 
 | 	struct usb_device *udev = devinfo->udev; | 
 | 	struct uas_cmd_info *cmdinfo = scsi_cmd_priv(cmnd); | 
 | 	struct urb *urb = usb_alloc_urb(0, gfp); | 
 | 	struct scsi_data_buffer *sdb = &cmnd->sdb; | 
 | 	unsigned int pipe = (dir == DMA_FROM_DEVICE) | 
 | 		? devinfo->data_in_pipe : devinfo->data_out_pipe; | 
 |  | 
 | 	if (!urb) | 
 | 		goto out; | 
 | 	usb_fill_bulk_urb(urb, udev, pipe, NULL, sdb->length, | 
 | 			  uas_data_cmplt, cmnd); | 
 | 	if (devinfo->use_streams) | 
 | 		urb->stream_id = cmdinfo->uas_tag; | 
 | 	urb->num_sgs = udev->bus->sg_tablesize ? sdb->table.nents : 0; | 
 | 	urb->sg = sdb->table.sgl; | 
 |  out: | 
 | 	return urb; | 
 | } | 
 |  | 
 | static struct urb *uas_alloc_sense_urb(struct uas_dev_info *devinfo, gfp_t gfp, | 
 | 				       struct scsi_cmnd *cmnd) | 
 | { | 
 | 	struct usb_device *udev = devinfo->udev; | 
 | 	struct uas_cmd_info *cmdinfo = scsi_cmd_priv(cmnd); | 
 | 	struct urb *urb = usb_alloc_urb(0, gfp); | 
 | 	struct sense_iu *iu; | 
 |  | 
 | 	if (!urb) | 
 | 		goto out; | 
 |  | 
 | 	iu = kzalloc(sizeof(*iu), gfp); | 
 | 	if (!iu) | 
 | 		goto free; | 
 |  | 
 | 	usb_fill_bulk_urb(urb, udev, devinfo->status_pipe, iu, sizeof(*iu), | 
 | 			  uas_stat_cmplt, cmnd->device->host); | 
 | 	if (devinfo->use_streams) | 
 | 		urb->stream_id = cmdinfo->uas_tag; | 
 | 	urb->transfer_flags |= URB_FREE_BUFFER; | 
 |  out: | 
 | 	return urb; | 
 |  free: | 
 | 	usb_free_urb(urb); | 
 | 	return NULL; | 
 | } | 
 |  | 
 | static struct urb *uas_alloc_cmd_urb(struct uas_dev_info *devinfo, gfp_t gfp, | 
 | 					struct scsi_cmnd *cmnd) | 
 | { | 
 | 	struct usb_device *udev = devinfo->udev; | 
 | 	struct scsi_device *sdev = cmnd->device; | 
 | 	struct uas_cmd_info *cmdinfo = scsi_cmd_priv(cmnd); | 
 | 	struct urb *urb = usb_alloc_urb(0, gfp); | 
 | 	struct command_iu *iu; | 
 | 	int len; | 
 |  | 
 | 	if (!urb) | 
 | 		goto out; | 
 |  | 
 | 	len = cmnd->cmd_len - 16; | 
 | 	if (len < 0) | 
 | 		len = 0; | 
 | 	len = ALIGN(len, 4); | 
 | 	iu = kzalloc(sizeof(*iu) + len, gfp); | 
 | 	if (!iu) | 
 | 		goto free; | 
 |  | 
 | 	iu->iu_id = IU_ID_COMMAND; | 
 | 	iu->tag = cpu_to_be16(cmdinfo->uas_tag); | 
 | 	iu->prio_attr = UAS_SIMPLE_TAG; | 
 | 	iu->len = len; | 
 | 	int_to_scsilun(sdev->lun, &iu->lun); | 
 | 	memcpy(iu->cdb, cmnd->cmnd, cmnd->cmd_len); | 
 |  | 
 | 	usb_fill_bulk_urb(urb, udev, devinfo->cmd_pipe, iu, sizeof(*iu) + len, | 
 | 							uas_cmd_cmplt, NULL); | 
 | 	urb->transfer_flags |= URB_FREE_BUFFER; | 
 |  out: | 
 | 	return urb; | 
 |  free: | 
 | 	usb_free_urb(urb); | 
 | 	return NULL; | 
 | } | 
 |  | 
 | /* | 
 |  * Why should I request the Status IU before sending the Command IU?  Spec | 
 |  * says to, but also says the device may receive them in any order.  Seems | 
 |  * daft to me. | 
 |  */ | 
 |  | 
 | static int uas_submit_sense_urb(struct scsi_cmnd *cmnd, gfp_t gfp) | 
 | { | 
 | 	struct uas_dev_info *devinfo = cmnd->device->hostdata; | 
 | 	struct urb *urb; | 
 | 	int err; | 
 |  | 
 | 	urb = uas_alloc_sense_urb(devinfo, gfp, cmnd); | 
 | 	if (!urb) | 
 | 		return -ENOMEM; | 
 | 	usb_anchor_urb(urb, &devinfo->sense_urbs); | 
 | 	err = usb_submit_urb(urb, gfp); | 
 | 	if (err) { | 
 | 		usb_unanchor_urb(urb); | 
 | 		uas_log_cmd_state(cmnd, "sense submit err", err); | 
 | 		usb_free_urb(urb); | 
 | 	} | 
 | 	return err; | 
 | } | 
 |  | 
 | static int uas_submit_urbs(struct scsi_cmnd *cmnd, | 
 | 			   struct uas_dev_info *devinfo) | 
 | { | 
 | 	struct uas_cmd_info *cmdinfo = scsi_cmd_priv(cmnd); | 
 | 	int err; | 
 |  | 
 | 	lockdep_assert_held(&devinfo->lock); | 
 | 	if (cmdinfo->state & SUBMIT_STATUS_URB) { | 
 | 		err = uas_submit_sense_urb(cmnd, GFP_ATOMIC); | 
 | 		if (err) | 
 | 			return err; | 
 | 		cmdinfo->state &= ~SUBMIT_STATUS_URB; | 
 | 	} | 
 |  | 
 | 	if (cmdinfo->state & ALLOC_DATA_IN_URB) { | 
 | 		cmdinfo->data_in_urb = uas_alloc_data_urb(devinfo, GFP_ATOMIC, | 
 | 							cmnd, DMA_FROM_DEVICE); | 
 | 		if (!cmdinfo->data_in_urb) | 
 | 			return -ENOMEM; | 
 | 		cmdinfo->state &= ~ALLOC_DATA_IN_URB; | 
 | 	} | 
 |  | 
 | 	if (cmdinfo->state & SUBMIT_DATA_IN_URB) { | 
 | 		usb_anchor_urb(cmdinfo->data_in_urb, &devinfo->data_urbs); | 
 | 		err = usb_submit_urb(cmdinfo->data_in_urb, GFP_ATOMIC); | 
 | 		if (err) { | 
 | 			usb_unanchor_urb(cmdinfo->data_in_urb); | 
 | 			uas_log_cmd_state(cmnd, "data in submit err", err); | 
 | 			return err; | 
 | 		} | 
 | 		cmdinfo->state &= ~SUBMIT_DATA_IN_URB; | 
 | 		cmdinfo->state |= DATA_IN_URB_INFLIGHT; | 
 | 	} | 
 |  | 
 | 	if (cmdinfo->state & ALLOC_DATA_OUT_URB) { | 
 | 		cmdinfo->data_out_urb = uas_alloc_data_urb(devinfo, GFP_ATOMIC, | 
 | 							cmnd, DMA_TO_DEVICE); | 
 | 		if (!cmdinfo->data_out_urb) | 
 | 			return -ENOMEM; | 
 | 		cmdinfo->state &= ~ALLOC_DATA_OUT_URB; | 
 | 	} | 
 |  | 
 | 	if (cmdinfo->state & SUBMIT_DATA_OUT_URB) { | 
 | 		usb_anchor_urb(cmdinfo->data_out_urb, &devinfo->data_urbs); | 
 | 		err = usb_submit_urb(cmdinfo->data_out_urb, GFP_ATOMIC); | 
 | 		if (err) { | 
 | 			usb_unanchor_urb(cmdinfo->data_out_urb); | 
 | 			uas_log_cmd_state(cmnd, "data out submit err", err); | 
 | 			return err; | 
 | 		} | 
 | 		cmdinfo->state &= ~SUBMIT_DATA_OUT_URB; | 
 | 		cmdinfo->state |= DATA_OUT_URB_INFLIGHT; | 
 | 	} | 
 |  | 
 | 	if (cmdinfo->state & ALLOC_CMD_URB) { | 
 | 		cmdinfo->cmd_urb = uas_alloc_cmd_urb(devinfo, GFP_ATOMIC, cmnd); | 
 | 		if (!cmdinfo->cmd_urb) | 
 | 			return -ENOMEM; | 
 | 		cmdinfo->state &= ~ALLOC_CMD_URB; | 
 | 	} | 
 |  | 
 | 	if (cmdinfo->state & SUBMIT_CMD_URB) { | 
 | 		usb_anchor_urb(cmdinfo->cmd_urb, &devinfo->cmd_urbs); | 
 | 		err = usb_submit_urb(cmdinfo->cmd_urb, GFP_ATOMIC); | 
 | 		if (err) { | 
 | 			usb_unanchor_urb(cmdinfo->cmd_urb); | 
 | 			uas_log_cmd_state(cmnd, "cmd submit err", err); | 
 | 			return err; | 
 | 		} | 
 | 		cmdinfo->cmd_urb = NULL; | 
 | 		cmdinfo->state &= ~SUBMIT_CMD_URB; | 
 | 		cmdinfo->state |= COMMAND_INFLIGHT; | 
 | 	} | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int uas_queuecommand_lck(struct scsi_cmnd *cmnd) | 
 | { | 
 | 	struct scsi_device *sdev = cmnd->device; | 
 | 	struct uas_dev_info *devinfo = sdev->hostdata; | 
 | 	struct uas_cmd_info *cmdinfo = scsi_cmd_priv(cmnd); | 
 | 	unsigned long flags; | 
 | 	int idx, err; | 
 |  | 
 | 	/* Re-check scsi_block_requests now that we've the host-lock */ | 
 | 	if (cmnd->device->host->host_self_blocked) | 
 | 		return SCSI_MLQUEUE_DEVICE_BUSY; | 
 |  | 
 | 	if ((devinfo->flags & US_FL_NO_ATA_1X) && | 
 | 			(cmnd->cmnd[0] == ATA_12 || cmnd->cmnd[0] == ATA_16)) { | 
 | 		memcpy(cmnd->sense_buffer, usb_stor_sense_invalidCDB, | 
 | 		       sizeof(usb_stor_sense_invalidCDB)); | 
 | 		cmnd->result = SAM_STAT_CHECK_CONDITION; | 
 | 		scsi_done(cmnd); | 
 | 		return 0; | 
 | 	} | 
 |  | 
 | 	spin_lock_irqsave(&devinfo->lock, flags); | 
 |  | 
 | 	if (devinfo->resetting) { | 
 | 		set_host_byte(cmnd, DID_ERROR); | 
 | 		scsi_done(cmnd); | 
 | 		goto zombie; | 
 | 	} | 
 |  | 
 | 	/* Find a free uas-tag */ | 
 | 	for (idx = 0; idx < devinfo->qdepth; idx++) { | 
 | 		if (!devinfo->cmnd[idx]) | 
 | 			break; | 
 | 	} | 
 | 	if (idx == devinfo->qdepth) { | 
 | 		spin_unlock_irqrestore(&devinfo->lock, flags); | 
 | 		return SCSI_MLQUEUE_DEVICE_BUSY; | 
 | 	} | 
 |  | 
 | 	memset(cmdinfo, 0, sizeof(*cmdinfo)); | 
 | 	cmdinfo->uas_tag = idx + 1; /* uas-tag == usb-stream-id, so 1 based */ | 
 | 	cmdinfo->state = SUBMIT_STATUS_URB | ALLOC_CMD_URB | SUBMIT_CMD_URB; | 
 |  | 
 | 	switch (cmnd->sc_data_direction) { | 
 | 	case DMA_FROM_DEVICE: | 
 | 		cmdinfo->state |= ALLOC_DATA_IN_URB | SUBMIT_DATA_IN_URB; | 
 | 		break; | 
 | 	case DMA_BIDIRECTIONAL: | 
 | 		cmdinfo->state |= ALLOC_DATA_IN_URB | SUBMIT_DATA_IN_URB; | 
 | 		fallthrough; | 
 | 	case DMA_TO_DEVICE: | 
 | 		cmdinfo->state |= ALLOC_DATA_OUT_URB | SUBMIT_DATA_OUT_URB; | 
 | 		break; | 
 | 	case DMA_NONE: | 
 | 		break; | 
 | 	} | 
 |  | 
 | 	if (!devinfo->use_streams) | 
 | 		cmdinfo->state &= ~(SUBMIT_DATA_IN_URB | SUBMIT_DATA_OUT_URB); | 
 |  | 
 | 	err = uas_submit_urbs(cmnd, devinfo); | 
 | 	/* | 
 | 	 * in case of fatal errors the SCSI layer is peculiar | 
 | 	 * a command that has finished is a success for the purpose | 
 | 	 * of queueing, no matter how fatal the error | 
 | 	 */ | 
 | 	if (err == -ENODEV) { | 
 | 		set_host_byte(cmnd, DID_NO_CONNECT); | 
 | 		scsi_done(cmnd); | 
 | 		goto zombie; | 
 | 	} | 
 | 	if (err) { | 
 | 		/* If we did nothing, give up now */ | 
 | 		if (cmdinfo->state & SUBMIT_STATUS_URB) { | 
 | 			spin_unlock_irqrestore(&devinfo->lock, flags); | 
 | 			return SCSI_MLQUEUE_DEVICE_BUSY; | 
 | 		} | 
 | 		uas_add_work(cmnd); | 
 | 	} | 
 |  | 
 | 	devinfo->cmnd[idx] = cmnd; | 
 | zombie: | 
 | 	spin_unlock_irqrestore(&devinfo->lock, flags); | 
 | 	return 0; | 
 | } | 
 |  | 
 | static DEF_SCSI_QCMD(uas_queuecommand) | 
 |  | 
 | /* | 
 |  * For now we do not support actually sending an abort to the device, so | 
 |  * this eh always fails. Still we must define it to make sure that we've | 
 |  * dropped all references to the cmnd in question once this function exits. | 
 |  */ | 
 | static int uas_eh_abort_handler(struct scsi_cmnd *cmnd) | 
 | { | 
 | 	struct uas_cmd_info *cmdinfo = scsi_cmd_priv(cmnd); | 
 | 	struct uas_dev_info *devinfo = (void *)cmnd->device->hostdata; | 
 | 	struct urb *data_in_urb = NULL; | 
 | 	struct urb *data_out_urb = NULL; | 
 | 	unsigned long flags; | 
 |  | 
 | 	spin_lock_irqsave(&devinfo->lock, flags); | 
 |  | 
 | 	uas_log_cmd_state(cmnd, __func__, 0); | 
 |  | 
 | 	/* Ensure that try_complete does not call scsi_done */ | 
 | 	cmdinfo->state |= COMMAND_ABORTED; | 
 |  | 
 | 	/* Drop all refs to this cmnd, kill data urbs to break their ref */ | 
 | 	devinfo->cmnd[cmdinfo->uas_tag - 1] = NULL; | 
 | 	if (cmdinfo->state & DATA_IN_URB_INFLIGHT) | 
 | 		data_in_urb = usb_get_urb(cmdinfo->data_in_urb); | 
 | 	if (cmdinfo->state & DATA_OUT_URB_INFLIGHT) | 
 | 		data_out_urb = usb_get_urb(cmdinfo->data_out_urb); | 
 |  | 
 | 	uas_free_unsubmitted_urbs(cmnd); | 
 |  | 
 | 	spin_unlock_irqrestore(&devinfo->lock, flags); | 
 |  | 
 | 	if (data_in_urb) { | 
 | 		usb_kill_urb(data_in_urb); | 
 | 		usb_put_urb(data_in_urb); | 
 | 	} | 
 | 	if (data_out_urb) { | 
 | 		usb_kill_urb(data_out_urb); | 
 | 		usb_put_urb(data_out_urb); | 
 | 	} | 
 |  | 
 | 	return FAILED; | 
 | } | 
 |  | 
 | static int uas_eh_device_reset_handler(struct scsi_cmnd *cmnd) | 
 | { | 
 | 	struct scsi_device *sdev = cmnd->device; | 
 | 	struct uas_dev_info *devinfo = sdev->hostdata; | 
 | 	struct usb_device *udev = devinfo->udev; | 
 | 	unsigned long flags; | 
 | 	int err; | 
 |  | 
 | 	err = usb_lock_device_for_reset(udev, devinfo->intf); | 
 | 	if (err) { | 
 | 		shost_printk(KERN_ERR, sdev->host, | 
 | 			     "%s FAILED to get lock err %d\n", __func__, err); | 
 | 		return FAILED; | 
 | 	} | 
 |  | 
 | 	shost_printk(KERN_INFO, sdev->host, "%s start\n", __func__); | 
 |  | 
 | 	spin_lock_irqsave(&devinfo->lock, flags); | 
 | 	devinfo->resetting = 1; | 
 | 	spin_unlock_irqrestore(&devinfo->lock, flags); | 
 |  | 
 | 	usb_kill_anchored_urbs(&devinfo->cmd_urbs); | 
 | 	usb_kill_anchored_urbs(&devinfo->sense_urbs); | 
 | 	usb_kill_anchored_urbs(&devinfo->data_urbs); | 
 | 	uas_zap_pending(devinfo, DID_RESET); | 
 |  | 
 | 	err = usb_reset_device(udev); | 
 |  | 
 | 	spin_lock_irqsave(&devinfo->lock, flags); | 
 | 	devinfo->resetting = 0; | 
 | 	spin_unlock_irqrestore(&devinfo->lock, flags); | 
 |  | 
 | 	usb_unlock_device(udev); | 
 |  | 
 | 	if (err) { | 
 | 		shost_printk(KERN_INFO, sdev->host, "%s FAILED err %d\n", | 
 | 			     __func__, err); | 
 | 		return FAILED; | 
 | 	} | 
 |  | 
 | 	shost_printk(KERN_INFO, sdev->host, "%s success\n", __func__); | 
 | 	return SUCCESS; | 
 | } | 
 |  | 
 | static int uas_target_alloc(struct scsi_target *starget) | 
 | { | 
 | 	struct uas_dev_info *devinfo = (struct uas_dev_info *) | 
 | 			dev_to_shost(starget->dev.parent)->hostdata; | 
 |  | 
 | 	if (devinfo->flags & US_FL_NO_REPORT_LUNS) | 
 | 		starget->no_report_luns = 1; | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int uas_sdev_init(struct scsi_device *sdev) | 
 | { | 
 | 	struct uas_dev_info *devinfo = | 
 | 		(struct uas_dev_info *)sdev->host->hostdata; | 
 |  | 
 | 	/* | 
 | 	 * Some USB storage devices reset if the IO advice hints grouping mode | 
 | 	 * page is queried. Hence skip that mode page. | 
 | 	 */ | 
 | 	sdev->sdev_bflags |= BLIST_SKIP_IO_HINTS; | 
 |  | 
 | 	sdev->hostdata = devinfo; | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int uas_sdev_configure(struct scsi_device *sdev, | 
 | 			      struct queue_limits *lim) | 
 | { | 
 | 	struct uas_dev_info *devinfo = sdev->hostdata; | 
 |  | 
 | 	if (devinfo->flags & US_FL_MAX_SECTORS_64) | 
 | 		lim->max_hw_sectors = 64; | 
 | 	else if (devinfo->flags & US_FL_MAX_SECTORS_240) | 
 | 		lim->max_hw_sectors = 240; | 
 |  | 
 | 	if (devinfo->flags & US_FL_NO_REPORT_OPCODES) | 
 | 		sdev->no_report_opcodes = 1; | 
 |  | 
 | 	/* A few buggy USB-ATA bridges don't understand FUA */ | 
 | 	if (devinfo->flags & US_FL_BROKEN_FUA) | 
 | 		sdev->broken_fua = 1; | 
 |  | 
 | 	/* UAS also needs to support FL_ALWAYS_SYNC */ | 
 | 	if (devinfo->flags & US_FL_ALWAYS_SYNC) { | 
 | 		sdev->skip_ms_page_3f = 1; | 
 | 		sdev->skip_ms_page_8 = 1; | 
 | 		sdev->wce_default_on = 1; | 
 | 	} | 
 |  | 
 | 	/* Some disks cannot handle READ_CAPACITY_16 */ | 
 | 	if (devinfo->flags & US_FL_NO_READ_CAPACITY_16) | 
 | 		sdev->no_read_capacity_16 = 1; | 
 |  | 
 | 	/* Some disks cannot handle WRITE_SAME */ | 
 | 	if (devinfo->flags & US_FL_NO_SAME) | 
 | 		sdev->no_write_same = 1; | 
 | 	/* | 
 | 	 * Some disks return the total number of blocks in response | 
 | 	 * to READ CAPACITY rather than the highest block number. | 
 | 	 * If this device makes that mistake, tell the sd driver. | 
 | 	 */ | 
 | 	if (devinfo->flags & US_FL_FIX_CAPACITY) | 
 | 		sdev->fix_capacity = 1; | 
 |  | 
 | 	/* | 
 | 	 * in some cases we have to guess | 
 | 	 */ | 
 | 	if (devinfo->flags & US_FL_CAPACITY_HEURISTICS) | 
 | 		sdev->guess_capacity = 1; | 
 |  | 
 | 	/* | 
 | 	 * Some devices report generic values until the media has been | 
 | 	 * accessed. Force a READ(10) prior to querying device | 
 | 	 * characteristics. | 
 | 	 */ | 
 | 	sdev->read_before_ms = 1; | 
 |  | 
 | 	/* | 
 | 	 * Some devices don't like MODE SENSE with page=0x3f, | 
 | 	 * which is the command used for checking if a device | 
 | 	 * is write-protected.  Now that we tell the sd driver | 
 | 	 * to do a 192-byte transfer with this command the | 
 | 	 * majority of devices work fine, but a few still can't | 
 | 	 * handle it.  The sd driver will simply assume those | 
 | 	 * devices are write-enabled. | 
 | 	 */ | 
 | 	if (devinfo->flags & US_FL_NO_WP_DETECT) | 
 | 		sdev->skip_ms_page_3f = 1; | 
 |  | 
 | 	scsi_change_queue_depth(sdev, devinfo->qdepth - 2); | 
 | 	return 0; | 
 | } | 
 |  | 
 | static const struct scsi_host_template uas_host_template = { | 
 | 	.module = THIS_MODULE, | 
 | 	.name = "uas", | 
 | 	.queuecommand = uas_queuecommand, | 
 | 	.target_alloc = uas_target_alloc, | 
 | 	.sdev_init = uas_sdev_init, | 
 | 	.sdev_configure = uas_sdev_configure, | 
 | 	.eh_abort_handler = uas_eh_abort_handler, | 
 | 	.eh_device_reset_handler = uas_eh_device_reset_handler, | 
 | 	.this_id = -1, | 
 | 	.skip_settle_delay = 1, | 
 | 	/* | 
 | 	 * The protocol has no requirements on alignment in the strict sense. | 
 | 	 * Controllers may or may not have alignment restrictions. | 
 | 	 * As this is not exported, we use an extremely conservative guess. | 
 | 	 */ | 
 | 	.dma_alignment = 511, | 
 | 	.dma_boundary = PAGE_SIZE - 1, | 
 | 	.cmd_size = sizeof(struct uas_cmd_info), | 
 | }; | 
 |  | 
 | #define UNUSUAL_DEV(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax, \ | 
 | 		    vendorName, productName, useProtocol, useTransport, \ | 
 | 		    initFunction, flags) \ | 
 | { USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax), \ | 
 | 	.driver_info = (flags) } | 
 |  | 
 | static const struct usb_device_id uas_usb_ids[] = { | 
 | #	include "unusual_uas.h" | 
 | 	{ USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, USB_SC_SCSI, USB_PR_BULK) }, | 
 | 	{ USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, USB_SC_SCSI, USB_PR_UAS) }, | 
 | 	{ } | 
 | }; | 
 | MODULE_DEVICE_TABLE(usb, uas_usb_ids); | 
 |  | 
 | #undef UNUSUAL_DEV | 
 |  | 
 | static int uas_switch_interface(struct usb_device *udev, | 
 | 				struct usb_interface *intf) | 
 | { | 
 | 	struct usb_host_interface *alt; | 
 |  | 
 | 	alt = uas_find_uas_alt_setting(intf); | 
 | 	if (!alt) | 
 | 		return -ENODEV; | 
 |  | 
 | 	return usb_set_interface(udev, alt->desc.bInterfaceNumber, | 
 | 			alt->desc.bAlternateSetting); | 
 | } | 
 |  | 
 | static int uas_configure_endpoints(struct uas_dev_info *devinfo) | 
 | { | 
 | 	struct usb_host_endpoint *eps[4] = { }; | 
 | 	struct usb_device *udev = devinfo->udev; | 
 | 	int r; | 
 |  | 
 | 	r = uas_find_endpoints(devinfo->intf->cur_altsetting, eps); | 
 | 	if (r) | 
 | 		return r; | 
 |  | 
 | 	devinfo->cmd_pipe = usb_sndbulkpipe(udev, | 
 | 					    usb_endpoint_num(&eps[0]->desc)); | 
 | 	devinfo->status_pipe = usb_rcvbulkpipe(udev, | 
 | 					    usb_endpoint_num(&eps[1]->desc)); | 
 | 	devinfo->data_in_pipe = usb_rcvbulkpipe(udev, | 
 | 					    usb_endpoint_num(&eps[2]->desc)); | 
 | 	devinfo->data_out_pipe = usb_sndbulkpipe(udev, | 
 | 					    usb_endpoint_num(&eps[3]->desc)); | 
 |  | 
 | 	if (udev->speed < USB_SPEED_SUPER) { | 
 | 		devinfo->qdepth = 32; | 
 | 		devinfo->use_streams = 0; | 
 | 	} else { | 
 | 		devinfo->qdepth = usb_alloc_streams(devinfo->intf, eps + 1, | 
 | 						    3, MAX_CMNDS, GFP_NOIO); | 
 | 		if (devinfo->qdepth < 0) | 
 | 			return devinfo->qdepth; | 
 | 		devinfo->use_streams = 1; | 
 | 	} | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static void uas_free_streams(struct uas_dev_info *devinfo) | 
 | { | 
 | 	struct usb_device *udev = devinfo->udev; | 
 | 	struct usb_host_endpoint *eps[3]; | 
 |  | 
 | 	eps[0] = usb_pipe_endpoint(udev, devinfo->status_pipe); | 
 | 	eps[1] = usb_pipe_endpoint(udev, devinfo->data_in_pipe); | 
 | 	eps[2] = usb_pipe_endpoint(udev, devinfo->data_out_pipe); | 
 | 	usb_free_streams(devinfo->intf, eps, 3, GFP_NOIO); | 
 | } | 
 |  | 
 | static int uas_probe(struct usb_interface *intf, const struct usb_device_id *id) | 
 | { | 
 | 	int result = -ENOMEM; | 
 | 	struct Scsi_Host *shost = NULL; | 
 | 	struct uas_dev_info *devinfo; | 
 | 	struct usb_device *udev = interface_to_usbdev(intf); | 
 | 	u64 dev_flags; | 
 |  | 
 | 	if (!uas_use_uas_driver(intf, id, &dev_flags)) | 
 | 		return -ENODEV; | 
 |  | 
 | 	if (uas_switch_interface(udev, intf)) | 
 | 		return -ENODEV; | 
 |  | 
 | 	shost = scsi_host_alloc(&uas_host_template, | 
 | 				sizeof(struct uas_dev_info)); | 
 | 	if (!shost) | 
 | 		goto set_alt0; | 
 |  | 
 | 	shost->max_cmd_len = 16 + 252; | 
 | 	shost->max_id = 1; | 
 | 	shost->max_lun = 256; | 
 | 	shost->max_channel = 0; | 
 | 	shost->sg_tablesize = udev->bus->sg_tablesize; | 
 |  | 
 | 	devinfo = (struct uas_dev_info *)shost->hostdata; | 
 | 	devinfo->intf = intf; | 
 | 	devinfo->udev = udev; | 
 | 	devinfo->resetting = 0; | 
 | 	devinfo->shutdown = 0; | 
 | 	devinfo->flags = dev_flags; | 
 | 	init_usb_anchor(&devinfo->cmd_urbs); | 
 | 	init_usb_anchor(&devinfo->sense_urbs); | 
 | 	init_usb_anchor(&devinfo->data_urbs); | 
 | 	spin_lock_init(&devinfo->lock); | 
 | 	INIT_WORK(&devinfo->work, uas_do_work); | 
 | 	INIT_WORK(&devinfo->scan_work, uas_scan_work); | 
 |  | 
 | 	result = uas_configure_endpoints(devinfo); | 
 | 	if (result) | 
 | 		goto set_alt0; | 
 |  | 
 | 	/* | 
 | 	 * 1 tag is reserved for untagged commands + | 
 | 	 * 1 tag to avoid off by one errors in some bridge firmwares | 
 | 	 */ | 
 | 	shost->can_queue = devinfo->qdepth - 2; | 
 |  | 
 | 	usb_set_intfdata(intf, shost); | 
 | 	result = scsi_add_host(shost, &intf->dev); | 
 | 	if (result) | 
 | 		goto free_streams; | 
 |  | 
 | 	/* Submit the delayed_work for SCSI-device scanning */ | 
 | 	schedule_work(&devinfo->scan_work); | 
 |  | 
 | 	return result; | 
 |  | 
 | free_streams: | 
 | 	uas_free_streams(devinfo); | 
 | 	usb_set_intfdata(intf, NULL); | 
 | set_alt0: | 
 | 	usb_set_interface(udev, intf->altsetting[0].desc.bInterfaceNumber, 0); | 
 | 	if (shost) | 
 | 		scsi_host_put(shost); | 
 | 	return result; | 
 | } | 
 |  | 
 | static int uas_cmnd_list_empty(struct uas_dev_info *devinfo) | 
 | { | 
 | 	unsigned long flags; | 
 | 	int i, r = 1; | 
 |  | 
 | 	spin_lock_irqsave(&devinfo->lock, flags); | 
 |  | 
 | 	for (i = 0; i < devinfo->qdepth; i++) { | 
 | 		if (devinfo->cmnd[i]) { | 
 | 			r = 0; /* Not empty */ | 
 | 			break; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	spin_unlock_irqrestore(&devinfo->lock, flags); | 
 |  | 
 | 	return r; | 
 | } | 
 |  | 
 | /* | 
 |  * Wait for any pending cmnds to complete, on usb-2 sense_urbs may temporarily | 
 |  * get empty while there still is more work to do due to sense-urbs completing | 
 |  * with a READ/WRITE_READY iu code, so keep waiting until the list gets empty. | 
 |  */ | 
 | static int uas_wait_for_pending_cmnds(struct uas_dev_info *devinfo) | 
 | { | 
 | 	unsigned long start_time; | 
 | 	int r; | 
 |  | 
 | 	start_time = jiffies; | 
 | 	do { | 
 | 		flush_work(&devinfo->work); | 
 |  | 
 | 		r = usb_wait_anchor_empty_timeout(&devinfo->sense_urbs, 5000); | 
 | 		if (r == 0) | 
 | 			return -ETIME; | 
 |  | 
 | 		r = usb_wait_anchor_empty_timeout(&devinfo->data_urbs, 500); | 
 | 		if (r == 0) | 
 | 			return -ETIME; | 
 |  | 
 | 		if (time_after(jiffies, start_time + 5 * HZ)) | 
 | 			return -ETIME; | 
 | 	} while (!uas_cmnd_list_empty(devinfo)); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int uas_pre_reset(struct usb_interface *intf) | 
 | { | 
 | 	struct Scsi_Host *shost = usb_get_intfdata(intf); | 
 | 	struct uas_dev_info *devinfo = (struct uas_dev_info *)shost->hostdata; | 
 | 	unsigned long flags; | 
 |  | 
 | 	if (devinfo->shutdown) | 
 | 		return 0; | 
 |  | 
 | 	/* Block new requests */ | 
 | 	spin_lock_irqsave(shost->host_lock, flags); | 
 | 	scsi_block_requests(shost); | 
 | 	spin_unlock_irqrestore(shost->host_lock, flags); | 
 |  | 
 | 	if (uas_wait_for_pending_cmnds(devinfo) != 0) { | 
 | 		shost_printk(KERN_ERR, shost, "%s: timed out\n", __func__); | 
 | 		scsi_unblock_requests(shost); | 
 | 		return 1; | 
 | 	} | 
 |  | 
 | 	uas_free_streams(devinfo); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int uas_post_reset(struct usb_interface *intf) | 
 | { | 
 | 	struct Scsi_Host *shost = usb_get_intfdata(intf); | 
 | 	struct uas_dev_info *devinfo = (struct uas_dev_info *)shost->hostdata; | 
 | 	unsigned long flags; | 
 | 	int err; | 
 |  | 
 | 	if (devinfo->shutdown) | 
 | 		return 0; | 
 |  | 
 | 	err = uas_configure_endpoints(devinfo); | 
 | 	if (err && err != -ENODEV) | 
 | 		shost_printk(KERN_ERR, shost, | 
 | 			     "%s: alloc streams error %d after reset", | 
 | 			     __func__, err); | 
 |  | 
 | 	/* we must unblock the host in every case lest we deadlock */ | 
 | 	spin_lock_irqsave(shost->host_lock, flags); | 
 | 	scsi_report_bus_reset(shost, 0); | 
 | 	spin_unlock_irqrestore(shost->host_lock, flags); | 
 |  | 
 | 	scsi_unblock_requests(shost); | 
 |  | 
 | 	return err ? 1 : 0; | 
 | } | 
 |  | 
 | static int uas_suspend(struct usb_interface *intf, pm_message_t message) | 
 | { | 
 | 	struct Scsi_Host *shost = usb_get_intfdata(intf); | 
 | 	struct uas_dev_info *devinfo = (struct uas_dev_info *)shost->hostdata; | 
 |  | 
 | 	if (uas_wait_for_pending_cmnds(devinfo) != 0) { | 
 | 		shost_printk(KERN_ERR, shost, "%s: timed out\n", __func__); | 
 | 		return -ETIME; | 
 | 	} | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int uas_resume(struct usb_interface *intf) | 
 | { | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int uas_reset_resume(struct usb_interface *intf) | 
 | { | 
 | 	struct Scsi_Host *shost = usb_get_intfdata(intf); | 
 | 	struct uas_dev_info *devinfo = (struct uas_dev_info *)shost->hostdata; | 
 | 	unsigned long flags; | 
 | 	int err; | 
 |  | 
 | 	err = uas_configure_endpoints(devinfo); | 
 | 	if (err) { | 
 | 		shost_printk(KERN_ERR, shost, | 
 | 			     "%s: alloc streams error %d after reset", | 
 | 			     __func__, err); | 
 | 		return -EIO; | 
 | 	} | 
 |  | 
 | 	spin_lock_irqsave(shost->host_lock, flags); | 
 | 	scsi_report_bus_reset(shost, 0); | 
 | 	spin_unlock_irqrestore(shost->host_lock, flags); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static void uas_disconnect(struct usb_interface *intf) | 
 | { | 
 | 	struct Scsi_Host *shost = usb_get_intfdata(intf); | 
 | 	struct uas_dev_info *devinfo = (struct uas_dev_info *)shost->hostdata; | 
 | 	unsigned long flags; | 
 |  | 
 | 	spin_lock_irqsave(&devinfo->lock, flags); | 
 | 	devinfo->resetting = 1; | 
 | 	spin_unlock_irqrestore(&devinfo->lock, flags); | 
 |  | 
 | 	cancel_work_sync(&devinfo->work); | 
 | 	usb_kill_anchored_urbs(&devinfo->cmd_urbs); | 
 | 	usb_kill_anchored_urbs(&devinfo->sense_urbs); | 
 | 	usb_kill_anchored_urbs(&devinfo->data_urbs); | 
 | 	uas_zap_pending(devinfo, DID_NO_CONNECT); | 
 |  | 
 | 	/* | 
 | 	 * Prevent SCSI scanning (if it hasn't started yet) | 
 | 	 * or wait for the SCSI-scanning routine to stop. | 
 | 	 */ | 
 | 	cancel_work_sync(&devinfo->scan_work); | 
 |  | 
 | 	scsi_remove_host(shost); | 
 | 	uas_free_streams(devinfo); | 
 | 	scsi_host_put(shost); | 
 | } | 
 |  | 
 | /* | 
 |  * Put the device back in usb-storage mode on shutdown, as some BIOS-es | 
 |  * hang on reboot when the device is still in uas mode. Note the reset is | 
 |  * necessary as some devices won't revert to usb-storage mode without it. | 
 |  */ | 
 | static void uas_shutdown(struct usb_interface *intf) | 
 | { | 
 | 	struct usb_device *udev = interface_to_usbdev(intf); | 
 | 	struct Scsi_Host *shost = usb_get_intfdata(intf); | 
 | 	struct uas_dev_info *devinfo = (struct uas_dev_info *)shost->hostdata; | 
 |  | 
 | 	if (system_state != SYSTEM_RESTART) | 
 | 		return; | 
 |  | 
 | 	devinfo->shutdown = 1; | 
 | 	uas_free_streams(devinfo); | 
 | 	usb_set_interface(udev, intf->altsetting[0].desc.bInterfaceNumber, 0); | 
 | 	usb_reset_device(udev); | 
 | } | 
 |  | 
 | static struct usb_driver uas_driver = { | 
 | 	.name = "uas", | 
 | 	.probe = uas_probe, | 
 | 	.disconnect = uas_disconnect, | 
 | 	.pre_reset = uas_pre_reset, | 
 | 	.post_reset = uas_post_reset, | 
 | 	.suspend = uas_suspend, | 
 | 	.resume = uas_resume, | 
 | 	.reset_resume = uas_reset_resume, | 
 | 	.shutdown = uas_shutdown, | 
 | 	.id_table = uas_usb_ids, | 
 | }; | 
 |  | 
 | static int __init uas_init(void) | 
 | { | 
 | 	int rv; | 
 |  | 
 | 	workqueue = alloc_workqueue("uas", WQ_MEM_RECLAIM, 0); | 
 | 	if (!workqueue) | 
 | 		return -ENOMEM; | 
 |  | 
 | 	rv = usb_register(&uas_driver); | 
 | 	if (rv) { | 
 | 		destroy_workqueue(workqueue); | 
 | 		return -ENOMEM; | 
 | 	} | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static void __exit uas_exit(void) | 
 | { | 
 | 	usb_deregister(&uas_driver); | 
 | 	destroy_workqueue(workqueue); | 
 | } | 
 |  | 
 | module_init(uas_init); | 
 | module_exit(uas_exit); | 
 |  | 
 | MODULE_DESCRIPTION("USB Attached SCSI driver"); | 
 | MODULE_LICENSE("GPL"); | 
 | MODULE_IMPORT_NS("USB_STORAGE"); | 
 | MODULE_AUTHOR( | 
 | 	"Hans de Goede <hdegoede@redhat.com>, Matthew Wilcox and Sarah Sharp"); |