|  | // SPDX-License-Identifier: GPL-2.0-only | 
|  | /* | 
|  | *  linux/sound/arm/aaci.c - ARM PrimeCell AACI PL041 driver | 
|  | * | 
|  | *  Copyright (C) 2003 Deep Blue Solutions Ltd, All Rights Reserved. | 
|  | * | 
|  | *  Documentation: ARM DDI 0173B | 
|  | */ | 
|  | #include <linux/module.h> | 
|  | #include <linux/delay.h> | 
|  | #include <linux/init.h> | 
|  | #include <linux/ioport.h> | 
|  | #include <linux/device.h> | 
|  | #include <linux/spinlock.h> | 
|  | #include <linux/interrupt.h> | 
|  | #include <linux/err.h> | 
|  | #include <linux/amba/bus.h> | 
|  | #include <linux/io.h> | 
|  |  | 
|  | #include <sound/core.h> | 
|  | #include <sound/initval.h> | 
|  | #include <sound/ac97_codec.h> | 
|  | #include <sound/pcm.h> | 
|  | #include <sound/pcm_params.h> | 
|  |  | 
|  | #include "aaci.h" | 
|  |  | 
|  | #define DRIVER_NAME	"aaci-pl041" | 
|  |  | 
|  | #define FRAME_PERIOD_US	21 | 
|  |  | 
|  | /* | 
|  | * PM support is not complete.  Turn it off. | 
|  | */ | 
|  | #undef CONFIG_PM | 
|  |  | 
|  | static void aaci_ac97_select_codec(struct aaci *aaci, struct snd_ac97 *ac97) | 
|  | { | 
|  | u32 v, maincr = aaci->maincr | MAINCR_SCRA(ac97->num); | 
|  |  | 
|  | /* | 
|  | * Ensure that the slot 1/2 RX registers are empty. | 
|  | */ | 
|  | v = readl(aaci->base + AACI_SLFR); | 
|  | if (v & SLFR_2RXV) | 
|  | readl(aaci->base + AACI_SL2RX); | 
|  | if (v & SLFR_1RXV) | 
|  | readl(aaci->base + AACI_SL1RX); | 
|  |  | 
|  | if (maincr != readl(aaci->base + AACI_MAINCR)) { | 
|  | writel(maincr, aaci->base + AACI_MAINCR); | 
|  | readl(aaci->base + AACI_MAINCR); | 
|  | udelay(1); | 
|  | } | 
|  | } | 
|  |  | 
|  | /* | 
|  | * P29: | 
|  | *  The recommended use of programming the external codec through slot 1 | 
|  | *  and slot 2 data is to use the channels during setup routines and the | 
|  | *  slot register at any other time.  The data written into slot 1, slot 2 | 
|  | *  and slot 12 registers is transmitted only when their corresponding | 
|  | *  SI1TxEn, SI2TxEn and SI12TxEn bits are set in the AACI_MAINCR | 
|  | *  register. | 
|  | */ | 
|  | static void aaci_ac97_write(struct snd_ac97 *ac97, unsigned short reg, | 
|  | unsigned short val) | 
|  | { | 
|  | struct aaci *aaci = ac97->private_data; | 
|  | int timeout; | 
|  | u32 v; | 
|  |  | 
|  | if (ac97->num >= 4) | 
|  | return; | 
|  |  | 
|  | mutex_lock(&aaci->ac97_sem); | 
|  |  | 
|  | aaci_ac97_select_codec(aaci, ac97); | 
|  |  | 
|  | /* | 
|  | * P54: You must ensure that AACI_SL2TX is always written | 
|  | * to, if required, before data is written to AACI_SL1TX. | 
|  | */ | 
|  | writel(val << 4, aaci->base + AACI_SL2TX); | 
|  | writel(reg << 12, aaci->base + AACI_SL1TX); | 
|  |  | 
|  | /* Initially, wait one frame period */ | 
|  | udelay(FRAME_PERIOD_US); | 
|  |  | 
|  | /* And then wait an additional eight frame periods for it to be sent */ | 
|  | timeout = FRAME_PERIOD_US * 8; | 
|  | do { | 
|  | udelay(1); | 
|  | v = readl(aaci->base + AACI_SLFR); | 
|  | } while ((v & (SLFR_1TXB|SLFR_2TXB)) && --timeout); | 
|  |  | 
|  | if (v & (SLFR_1TXB|SLFR_2TXB)) | 
|  | dev_err(&aaci->dev->dev, | 
|  | "timeout waiting for write to complete\n"); | 
|  |  | 
|  | mutex_unlock(&aaci->ac97_sem); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Read an AC'97 register. | 
|  | */ | 
|  | static unsigned short aaci_ac97_read(struct snd_ac97 *ac97, unsigned short reg) | 
|  | { | 
|  | struct aaci *aaci = ac97->private_data; | 
|  | int timeout, retries = 10; | 
|  | u32 v; | 
|  |  | 
|  | if (ac97->num >= 4) | 
|  | return ~0; | 
|  |  | 
|  | mutex_lock(&aaci->ac97_sem); | 
|  |  | 
|  | aaci_ac97_select_codec(aaci, ac97); | 
|  |  | 
|  | /* | 
|  | * Write the register address to slot 1. | 
|  | */ | 
|  | writel((reg << 12) | (1 << 19), aaci->base + AACI_SL1TX); | 
|  |  | 
|  | /* Initially, wait one frame period */ | 
|  | udelay(FRAME_PERIOD_US); | 
|  |  | 
|  | /* And then wait an additional eight frame periods for it to be sent */ | 
|  | timeout = FRAME_PERIOD_US * 8; | 
|  | do { | 
|  | udelay(1); | 
|  | v = readl(aaci->base + AACI_SLFR); | 
|  | } while ((v & SLFR_1TXB) && --timeout); | 
|  |  | 
|  | if (v & SLFR_1TXB) { | 
|  | dev_err(&aaci->dev->dev, "timeout on slot 1 TX busy\n"); | 
|  | v = ~0; | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | /* Now wait for the response frame */ | 
|  | udelay(FRAME_PERIOD_US); | 
|  |  | 
|  | /* And then wait an additional eight frame periods for data */ | 
|  | timeout = FRAME_PERIOD_US * 8; | 
|  | do { | 
|  | udelay(1); | 
|  | cond_resched(); | 
|  | v = readl(aaci->base + AACI_SLFR) & (SLFR_1RXV|SLFR_2RXV); | 
|  | } while ((v != (SLFR_1RXV|SLFR_2RXV)) && --timeout); | 
|  |  | 
|  | if (v != (SLFR_1RXV|SLFR_2RXV)) { | 
|  | dev_err(&aaci->dev->dev, "timeout on RX valid\n"); | 
|  | v = ~0; | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | do { | 
|  | v = readl(aaci->base + AACI_SL1RX) >> 12; | 
|  | if (v == reg) { | 
|  | v = readl(aaci->base + AACI_SL2RX) >> 4; | 
|  | break; | 
|  | } else if (--retries) { | 
|  | dev_warn(&aaci->dev->dev, | 
|  | "ac97 read back fail.  retry\n"); | 
|  | continue; | 
|  | } else { | 
|  | dev_warn(&aaci->dev->dev, | 
|  | "wrong ac97 register read back (%x != %x)\n", | 
|  | v, reg); | 
|  | v = ~0; | 
|  | } | 
|  | } while (retries); | 
|  | out: | 
|  | mutex_unlock(&aaci->ac97_sem); | 
|  | return v; | 
|  | } | 
|  |  | 
|  | static inline void | 
|  | aaci_chan_wait_ready(struct aaci_runtime *aacirun, unsigned long mask) | 
|  | { | 
|  | u32 val; | 
|  | int timeout = 5000; | 
|  |  | 
|  | do { | 
|  | udelay(1); | 
|  | val = readl(aacirun->base + AACI_SR); | 
|  | } while (val & mask && timeout--); | 
|  | } | 
|  |  | 
|  |  | 
|  |  | 
|  | /* | 
|  | * Interrupt support. | 
|  | */ | 
|  | static void aaci_fifo_irq(struct aaci *aaci, int channel, u32 mask) | 
|  | { | 
|  | if (mask & ISR_ORINTR) { | 
|  | dev_warn(&aaci->dev->dev, "RX overrun on chan %d\n", channel); | 
|  | writel(ICLR_RXOEC1 << channel, aaci->base + AACI_INTCLR); | 
|  | } | 
|  |  | 
|  | if (mask & ISR_RXTOINTR) { | 
|  | dev_warn(&aaci->dev->dev, "RX timeout on chan %d\n", channel); | 
|  | writel(ICLR_RXTOFEC1 << channel, aaci->base + AACI_INTCLR); | 
|  | } | 
|  |  | 
|  | if (mask & ISR_RXINTR) { | 
|  | struct aaci_runtime *aacirun = &aaci->capture; | 
|  | bool period_elapsed = false; | 
|  | void *ptr; | 
|  |  | 
|  | if (!aacirun->substream || !aacirun->start) { | 
|  | dev_warn(&aaci->dev->dev, "RX interrupt???\n"); | 
|  | writel(0, aacirun->base + AACI_IE); | 
|  | return; | 
|  | } | 
|  |  | 
|  | spin_lock(&aacirun->lock); | 
|  |  | 
|  | ptr = aacirun->ptr; | 
|  | do { | 
|  | unsigned int len = aacirun->fifo_bytes; | 
|  | u32 val; | 
|  |  | 
|  | if (aacirun->bytes <= 0) { | 
|  | aacirun->bytes += aacirun->period; | 
|  | period_elapsed = true; | 
|  | } | 
|  | if (!(aacirun->cr & CR_EN)) | 
|  | break; | 
|  |  | 
|  | val = readl(aacirun->base + AACI_SR); | 
|  | if (!(val & SR_RXHF)) | 
|  | break; | 
|  | if (!(val & SR_RXFF)) | 
|  | len >>= 1; | 
|  |  | 
|  | aacirun->bytes -= len; | 
|  |  | 
|  | /* reading 16 bytes at a time */ | 
|  | for( ; len > 0; len -= 16) { | 
|  | asm( | 
|  | "ldmia	%1, {r0, r1, r2, r3}\n\t" | 
|  | "stmia	%0!, {r0, r1, r2, r3}" | 
|  | : "+r" (ptr) | 
|  | : "r" (aacirun->fifo) | 
|  | : "r0", "r1", "r2", "r3", "cc"); | 
|  |  | 
|  | if (ptr >= aacirun->end) | 
|  | ptr = aacirun->start; | 
|  | } | 
|  | } while(1); | 
|  |  | 
|  | aacirun->ptr = ptr; | 
|  |  | 
|  | spin_unlock(&aacirun->lock); | 
|  |  | 
|  | if (period_elapsed) | 
|  | snd_pcm_period_elapsed(aacirun->substream); | 
|  | } | 
|  |  | 
|  | if (mask & ISR_URINTR) { | 
|  | dev_dbg(&aaci->dev->dev, "TX underrun on chan %d\n", channel); | 
|  | writel(ICLR_TXUEC1 << channel, aaci->base + AACI_INTCLR); | 
|  | } | 
|  |  | 
|  | if (mask & ISR_TXINTR) { | 
|  | struct aaci_runtime *aacirun = &aaci->playback; | 
|  | bool period_elapsed = false; | 
|  | void *ptr; | 
|  |  | 
|  | if (!aacirun->substream || !aacirun->start) { | 
|  | dev_warn(&aaci->dev->dev, "TX interrupt???\n"); | 
|  | writel(0, aacirun->base + AACI_IE); | 
|  | return; | 
|  | } | 
|  |  | 
|  | spin_lock(&aacirun->lock); | 
|  |  | 
|  | ptr = aacirun->ptr; | 
|  | do { | 
|  | unsigned int len = aacirun->fifo_bytes; | 
|  | u32 val; | 
|  |  | 
|  | if (aacirun->bytes <= 0) { | 
|  | aacirun->bytes += aacirun->period; | 
|  | period_elapsed = true; | 
|  | } | 
|  | if (!(aacirun->cr & CR_EN)) | 
|  | break; | 
|  |  | 
|  | val = readl(aacirun->base + AACI_SR); | 
|  | if (!(val & SR_TXHE)) | 
|  | break; | 
|  | if (!(val & SR_TXFE)) | 
|  | len >>= 1; | 
|  |  | 
|  | aacirun->bytes -= len; | 
|  |  | 
|  | /* writing 16 bytes at a time */ | 
|  | for ( ; len > 0; len -= 16) { | 
|  | asm( | 
|  | "ldmia	%0!, {r0, r1, r2, r3}\n\t" | 
|  | "stmia	%1, {r0, r1, r2, r3}" | 
|  | : "+r" (ptr) | 
|  | : "r" (aacirun->fifo) | 
|  | : "r0", "r1", "r2", "r3", "cc"); | 
|  |  | 
|  | if (ptr >= aacirun->end) | 
|  | ptr = aacirun->start; | 
|  | } | 
|  | } while (1); | 
|  |  | 
|  | aacirun->ptr = ptr; | 
|  |  | 
|  | spin_unlock(&aacirun->lock); | 
|  |  | 
|  | if (period_elapsed) | 
|  | snd_pcm_period_elapsed(aacirun->substream); | 
|  | } | 
|  | } | 
|  |  | 
|  | static irqreturn_t aaci_irq(int irq, void *devid) | 
|  | { | 
|  | struct aaci *aaci = devid; | 
|  | u32 mask; | 
|  | int i; | 
|  |  | 
|  | mask = readl(aaci->base + AACI_ALLINTS); | 
|  | if (mask) { | 
|  | u32 m = mask; | 
|  | for (i = 0; i < 4; i++, m >>= 7) { | 
|  | if (m & 0x7f) { | 
|  | aaci_fifo_irq(aaci, i, m); | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | return mask ? IRQ_HANDLED : IRQ_NONE; | 
|  | } | 
|  |  | 
|  |  | 
|  |  | 
|  | /* | 
|  | * ALSA support. | 
|  | */ | 
|  | static const struct snd_pcm_hardware aaci_hw_info = { | 
|  | .info			= SNDRV_PCM_INFO_MMAP | | 
|  | SNDRV_PCM_INFO_MMAP_VALID | | 
|  | SNDRV_PCM_INFO_INTERLEAVED | | 
|  | SNDRV_PCM_INFO_BLOCK_TRANSFER | | 
|  | SNDRV_PCM_INFO_RESUME, | 
|  |  | 
|  | /* | 
|  | * ALSA doesn't support 18-bit or 20-bit packed into 32-bit | 
|  | * words.  It also doesn't support 12-bit at all. | 
|  | */ | 
|  | .formats		= SNDRV_PCM_FMTBIT_S16_LE, | 
|  |  | 
|  | /* rates are setup from the AC'97 codec */ | 
|  | .channels_min		= 2, | 
|  | .channels_max		= 2, | 
|  | .buffer_bytes_max	= 64 * 1024, | 
|  | .period_bytes_min	= 256, | 
|  | .period_bytes_max	= PAGE_SIZE, | 
|  | .periods_min		= 4, | 
|  | .periods_max		= PAGE_SIZE / 16, | 
|  | }; | 
|  |  | 
|  | /* | 
|  | * We can support two and four channel audio.  Unfortunately | 
|  | * six channel audio requires a non-standard channel ordering: | 
|  | *   2 -> FL(3), FR(4) | 
|  | *   4 -> FL(3), FR(4), SL(7), SR(8) | 
|  | *   6 -> FL(3), FR(4), SL(7), SR(8), C(6), LFE(9) (required) | 
|  | *        FL(3), FR(4), C(6), SL(7), SR(8), LFE(9) (actual) | 
|  | * This requires an ALSA configuration file to correct. | 
|  | */ | 
|  | static int aaci_rule_channels(struct snd_pcm_hw_params *p, | 
|  | struct snd_pcm_hw_rule *rule) | 
|  | { | 
|  | static const unsigned int channel_list[] = { 2, 4, 6 }; | 
|  | struct aaci *aaci = rule->private; | 
|  | unsigned int mask = 1 << 0, slots; | 
|  |  | 
|  | /* pcms[0] is the our 5.1 PCM instance. */ | 
|  | slots = aaci->ac97_bus->pcms[0].r[0].slots; | 
|  | if (slots & (1 << AC97_SLOT_PCM_SLEFT)) { | 
|  | mask |= 1 << 1; | 
|  | if (slots & (1 << AC97_SLOT_LFE)) | 
|  | mask |= 1 << 2; | 
|  | } | 
|  |  | 
|  | return snd_interval_list(hw_param_interval(p, rule->var), | 
|  | ARRAY_SIZE(channel_list), channel_list, mask); | 
|  | } | 
|  |  | 
|  | static int aaci_pcm_open(struct snd_pcm_substream *substream) | 
|  | { | 
|  | struct snd_pcm_runtime *runtime = substream->runtime; | 
|  | struct aaci *aaci = substream->private_data; | 
|  | struct aaci_runtime *aacirun; | 
|  | int ret = 0; | 
|  |  | 
|  | if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) { | 
|  | aacirun = &aaci->playback; | 
|  | } else { | 
|  | aacirun = &aaci->capture; | 
|  | } | 
|  |  | 
|  | aacirun->substream = substream; | 
|  | runtime->private_data = aacirun; | 
|  | runtime->hw = aaci_hw_info; | 
|  | runtime->hw.rates = aacirun->pcm->rates; | 
|  | snd_pcm_limit_hw_rates(runtime); | 
|  |  | 
|  | if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) { | 
|  | runtime->hw.channels_max = 6; | 
|  |  | 
|  | /* Add rule describing channel dependency. */ | 
|  | ret = snd_pcm_hw_rule_add(substream->runtime, 0, | 
|  | SNDRV_PCM_HW_PARAM_CHANNELS, | 
|  | aaci_rule_channels, aaci, | 
|  | SNDRV_PCM_HW_PARAM_CHANNELS, -1); | 
|  | if (ret) | 
|  | return ret; | 
|  |  | 
|  | if (aacirun->pcm->r[1].slots) | 
|  | snd_ac97_pcm_double_rate_rules(runtime); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * ALSA wants the byte-size of the FIFOs.  As we only support | 
|  | * 16-bit samples, this is twice the FIFO depth irrespective | 
|  | * of whether it's in compact mode or not. | 
|  | */ | 
|  | runtime->hw.fifo_size = aaci->fifo_depth * 2; | 
|  |  | 
|  | mutex_lock(&aaci->irq_lock); | 
|  | if (!aaci->users++) { | 
|  | ret = request_irq(aaci->dev->irq[0], aaci_irq, | 
|  | IRQF_SHARED, DRIVER_NAME, aaci); | 
|  | if (ret != 0) | 
|  | aaci->users--; | 
|  | } | 
|  | mutex_unlock(&aaci->irq_lock); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  |  | 
|  | /* | 
|  | * Common ALSA stuff | 
|  | */ | 
|  | static int aaci_pcm_close(struct snd_pcm_substream *substream) | 
|  | { | 
|  | struct aaci *aaci = substream->private_data; | 
|  | struct aaci_runtime *aacirun = substream->runtime->private_data; | 
|  |  | 
|  | WARN_ON(aacirun->cr & CR_EN); | 
|  |  | 
|  | aacirun->substream = NULL; | 
|  |  | 
|  | mutex_lock(&aaci->irq_lock); | 
|  | if (!--aaci->users) | 
|  | free_irq(aaci->dev->irq[0], aaci); | 
|  | mutex_unlock(&aaci->irq_lock); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int aaci_pcm_hw_free(struct snd_pcm_substream *substream) | 
|  | { | 
|  | struct aaci_runtime *aacirun = substream->runtime->private_data; | 
|  |  | 
|  | /* | 
|  | * This must not be called with the device enabled. | 
|  | */ | 
|  | WARN_ON(aacirun->cr & CR_EN); | 
|  |  | 
|  | if (aacirun->pcm_open) | 
|  | snd_ac97_pcm_close(aacirun->pcm); | 
|  | aacirun->pcm_open = 0; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* Channel to slot mask */ | 
|  | static const u32 channels_to_slotmask[] = { | 
|  | [2] = CR_SL3 | CR_SL4, | 
|  | [4] = CR_SL3 | CR_SL4 | CR_SL7 | CR_SL8, | 
|  | [6] = CR_SL3 | CR_SL4 | CR_SL7 | CR_SL8 | CR_SL6 | CR_SL9, | 
|  | }; | 
|  |  | 
|  | static int aaci_pcm_hw_params(struct snd_pcm_substream *substream, | 
|  | struct snd_pcm_hw_params *params) | 
|  | { | 
|  | struct aaci_runtime *aacirun = substream->runtime->private_data; | 
|  | struct aaci *aaci = substream->private_data; | 
|  | unsigned int channels = params_channels(params); | 
|  | unsigned int rate = params_rate(params); | 
|  | int dbl = rate > 48000; | 
|  | int err; | 
|  |  | 
|  | aaci_pcm_hw_free(substream); | 
|  | if (aacirun->pcm_open) { | 
|  | snd_ac97_pcm_close(aacirun->pcm); | 
|  | aacirun->pcm_open = 0; | 
|  | } | 
|  |  | 
|  | /* channels is already limited to 2, 4, or 6 by aaci_rule_channels */ | 
|  | if (dbl && channels != 2) | 
|  | return -EINVAL; | 
|  |  | 
|  | err = snd_ac97_pcm_open(aacirun->pcm, rate, channels, | 
|  | aacirun->pcm->r[dbl].slots); | 
|  |  | 
|  | aacirun->pcm_open = err == 0; | 
|  | aacirun->cr = CR_FEN | CR_COMPACT | CR_SZ16; | 
|  | aacirun->cr |= channels_to_slotmask[channels + dbl * 2]; | 
|  |  | 
|  | /* | 
|  | * fifo_bytes is the number of bytes we transfer to/from | 
|  | * the FIFO, including padding.  So that's x4.  As we're | 
|  | * in compact mode, the FIFO is half the size. | 
|  | */ | 
|  | aacirun->fifo_bytes = aaci->fifo_depth * 4 / 2; | 
|  |  | 
|  | return err; | 
|  | } | 
|  |  | 
|  | static int aaci_pcm_prepare(struct snd_pcm_substream *substream) | 
|  | { | 
|  | struct snd_pcm_runtime *runtime = substream->runtime; | 
|  | struct aaci_runtime *aacirun = runtime->private_data; | 
|  |  | 
|  | aacirun->period	= snd_pcm_lib_period_bytes(substream); | 
|  | aacirun->start	= runtime->dma_area; | 
|  | aacirun->end	= aacirun->start + snd_pcm_lib_buffer_bytes(substream); | 
|  | aacirun->ptr	= aacirun->start; | 
|  | aacirun->bytes	= aacirun->period; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static snd_pcm_uframes_t aaci_pcm_pointer(struct snd_pcm_substream *substream) | 
|  | { | 
|  | struct snd_pcm_runtime *runtime = substream->runtime; | 
|  | struct aaci_runtime *aacirun = runtime->private_data; | 
|  | ssize_t bytes = aacirun->ptr - aacirun->start; | 
|  |  | 
|  | return bytes_to_frames(runtime, bytes); | 
|  | } | 
|  |  | 
|  |  | 
|  | /* | 
|  | * Playback specific ALSA stuff | 
|  | */ | 
|  | static void aaci_pcm_playback_stop(struct aaci_runtime *aacirun) | 
|  | { | 
|  | u32 ie; | 
|  |  | 
|  | ie = readl(aacirun->base + AACI_IE); | 
|  | ie &= ~(IE_URIE|IE_TXIE); | 
|  | writel(ie, aacirun->base + AACI_IE); | 
|  | aacirun->cr &= ~CR_EN; | 
|  | aaci_chan_wait_ready(aacirun, SR_TXB); | 
|  | writel(aacirun->cr, aacirun->base + AACI_TXCR); | 
|  | } | 
|  |  | 
|  | static void aaci_pcm_playback_start(struct aaci_runtime *aacirun) | 
|  | { | 
|  | u32 ie; | 
|  |  | 
|  | aaci_chan_wait_ready(aacirun, SR_TXB); | 
|  | aacirun->cr |= CR_EN; | 
|  |  | 
|  | ie = readl(aacirun->base + AACI_IE); | 
|  | ie |= IE_URIE | IE_TXIE; | 
|  | writel(ie, aacirun->base + AACI_IE); | 
|  | writel(aacirun->cr, aacirun->base + AACI_TXCR); | 
|  | } | 
|  |  | 
|  | static int aaci_pcm_playback_trigger(struct snd_pcm_substream *substream, int cmd) | 
|  | { | 
|  | struct aaci_runtime *aacirun = substream->runtime->private_data; | 
|  | unsigned long flags; | 
|  | int ret = 0; | 
|  |  | 
|  | spin_lock_irqsave(&aacirun->lock, flags); | 
|  |  | 
|  | switch (cmd) { | 
|  | case SNDRV_PCM_TRIGGER_START: | 
|  | aaci_pcm_playback_start(aacirun); | 
|  | break; | 
|  |  | 
|  | case SNDRV_PCM_TRIGGER_RESUME: | 
|  | aaci_pcm_playback_start(aacirun); | 
|  | break; | 
|  |  | 
|  | case SNDRV_PCM_TRIGGER_STOP: | 
|  | aaci_pcm_playback_stop(aacirun); | 
|  | break; | 
|  |  | 
|  | case SNDRV_PCM_TRIGGER_SUSPEND: | 
|  | aaci_pcm_playback_stop(aacirun); | 
|  | break; | 
|  |  | 
|  | case SNDRV_PCM_TRIGGER_PAUSE_PUSH: | 
|  | break; | 
|  |  | 
|  | case SNDRV_PCM_TRIGGER_PAUSE_RELEASE: | 
|  | break; | 
|  |  | 
|  | default: | 
|  | ret = -EINVAL; | 
|  | } | 
|  |  | 
|  | spin_unlock_irqrestore(&aacirun->lock, flags); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static const struct snd_pcm_ops aaci_playback_ops = { | 
|  | .open		= aaci_pcm_open, | 
|  | .close		= aaci_pcm_close, | 
|  | .hw_params	= aaci_pcm_hw_params, | 
|  | .hw_free	= aaci_pcm_hw_free, | 
|  | .prepare	= aaci_pcm_prepare, | 
|  | .trigger	= aaci_pcm_playback_trigger, | 
|  | .pointer	= aaci_pcm_pointer, | 
|  | }; | 
|  |  | 
|  | static void aaci_pcm_capture_stop(struct aaci_runtime *aacirun) | 
|  | { | 
|  | u32 ie; | 
|  |  | 
|  | aaci_chan_wait_ready(aacirun, SR_RXB); | 
|  |  | 
|  | ie = readl(aacirun->base + AACI_IE); | 
|  | ie &= ~(IE_ORIE | IE_RXIE); | 
|  | writel(ie, aacirun->base+AACI_IE); | 
|  |  | 
|  | aacirun->cr &= ~CR_EN; | 
|  |  | 
|  | writel(aacirun->cr, aacirun->base + AACI_RXCR); | 
|  | } | 
|  |  | 
|  | static void aaci_pcm_capture_start(struct aaci_runtime *aacirun) | 
|  | { | 
|  | u32 ie; | 
|  |  | 
|  | aaci_chan_wait_ready(aacirun, SR_RXB); | 
|  |  | 
|  | #ifdef DEBUG | 
|  | /* RX Timeout value: bits 28:17 in RXCR */ | 
|  | aacirun->cr |= 0xf << 17; | 
|  | #endif | 
|  |  | 
|  | aacirun->cr |= CR_EN; | 
|  | writel(aacirun->cr, aacirun->base + AACI_RXCR); | 
|  |  | 
|  | ie = readl(aacirun->base + AACI_IE); | 
|  | ie |= IE_ORIE |IE_RXIE; // overrun and rx interrupt -- half full | 
|  | writel(ie, aacirun->base + AACI_IE); | 
|  | } | 
|  |  | 
|  | static int aaci_pcm_capture_trigger(struct snd_pcm_substream *substream, int cmd) | 
|  | { | 
|  | struct aaci_runtime *aacirun = substream->runtime->private_data; | 
|  | unsigned long flags; | 
|  | int ret = 0; | 
|  |  | 
|  | spin_lock_irqsave(&aacirun->lock, flags); | 
|  |  | 
|  | switch (cmd) { | 
|  | case SNDRV_PCM_TRIGGER_START: | 
|  | aaci_pcm_capture_start(aacirun); | 
|  | break; | 
|  |  | 
|  | case SNDRV_PCM_TRIGGER_RESUME: | 
|  | aaci_pcm_capture_start(aacirun); | 
|  | break; | 
|  |  | 
|  | case SNDRV_PCM_TRIGGER_STOP: | 
|  | aaci_pcm_capture_stop(aacirun); | 
|  | break; | 
|  |  | 
|  | case SNDRV_PCM_TRIGGER_SUSPEND: | 
|  | aaci_pcm_capture_stop(aacirun); | 
|  | break; | 
|  |  | 
|  | case SNDRV_PCM_TRIGGER_PAUSE_PUSH: | 
|  | break; | 
|  |  | 
|  | case SNDRV_PCM_TRIGGER_PAUSE_RELEASE: | 
|  | break; | 
|  |  | 
|  | default: | 
|  | ret = -EINVAL; | 
|  | } | 
|  |  | 
|  | spin_unlock_irqrestore(&aacirun->lock, flags); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int aaci_pcm_capture_prepare(struct snd_pcm_substream *substream) | 
|  | { | 
|  | struct snd_pcm_runtime *runtime = substream->runtime; | 
|  | struct aaci *aaci = substream->private_data; | 
|  |  | 
|  | aaci_pcm_prepare(substream); | 
|  |  | 
|  | /* allow changing of sample rate */ | 
|  | aaci_ac97_write(aaci->ac97, AC97_EXTENDED_STATUS, 0x0001); /* VRA */ | 
|  | aaci_ac97_write(aaci->ac97, AC97_PCM_LR_ADC_RATE, runtime->rate); | 
|  | aaci_ac97_write(aaci->ac97, AC97_PCM_MIC_ADC_RATE, runtime->rate); | 
|  |  | 
|  | /* Record select: Mic: 0, Aux: 3, Line: 4 */ | 
|  | aaci_ac97_write(aaci->ac97, AC97_REC_SEL, 0x0404); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static const struct snd_pcm_ops aaci_capture_ops = { | 
|  | .open		= aaci_pcm_open, | 
|  | .close		= aaci_pcm_close, | 
|  | .hw_params	= aaci_pcm_hw_params, | 
|  | .hw_free	= aaci_pcm_hw_free, | 
|  | .prepare	= aaci_pcm_capture_prepare, | 
|  | .trigger	= aaci_pcm_capture_trigger, | 
|  | .pointer	= aaci_pcm_pointer, | 
|  | }; | 
|  |  | 
|  | /* | 
|  | * Power Management. | 
|  | */ | 
|  | #ifdef CONFIG_PM | 
|  | static int aaci_do_suspend(struct snd_card *card) | 
|  | { | 
|  | struct aaci *aaci = card->private_data; | 
|  | snd_power_change_state(card, SNDRV_CTL_POWER_D3cold); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int aaci_do_resume(struct snd_card *card) | 
|  | { | 
|  | snd_power_change_state(card, SNDRV_CTL_POWER_D0); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int aaci_suspend(struct device *dev) | 
|  | { | 
|  | struct snd_card *card = dev_get_drvdata(dev); | 
|  | return card ? aaci_do_suspend(card) : 0; | 
|  | } | 
|  |  | 
|  | static int aaci_resume(struct device *dev) | 
|  | { | 
|  | struct snd_card *card = dev_get_drvdata(dev); | 
|  | return card ? aaci_do_resume(card) : 0; | 
|  | } | 
|  |  | 
|  | static SIMPLE_DEV_PM_OPS(aaci_dev_pm_ops, aaci_suspend, aaci_resume); | 
|  | #define AACI_DEV_PM_OPS (&aaci_dev_pm_ops) | 
|  | #else | 
|  | #define AACI_DEV_PM_OPS NULL | 
|  | #endif | 
|  |  | 
|  |  | 
|  | static const struct ac97_pcm ac97_defs[] = { | 
|  | [0] = {	/* Front PCM */ | 
|  | .exclusive = 1, | 
|  | .r = { | 
|  | [0] = { | 
|  | .slots	= (1 << AC97_SLOT_PCM_LEFT) | | 
|  | (1 << AC97_SLOT_PCM_RIGHT) | | 
|  | (1 << AC97_SLOT_PCM_CENTER) | | 
|  | (1 << AC97_SLOT_PCM_SLEFT) | | 
|  | (1 << AC97_SLOT_PCM_SRIGHT) | | 
|  | (1 << AC97_SLOT_LFE), | 
|  | }, | 
|  | [1] = { | 
|  | .slots	= (1 << AC97_SLOT_PCM_LEFT) | | 
|  | (1 << AC97_SLOT_PCM_RIGHT) | | 
|  | (1 << AC97_SLOT_PCM_LEFT_0) | | 
|  | (1 << AC97_SLOT_PCM_RIGHT_0), | 
|  | }, | 
|  | }, | 
|  | }, | 
|  | [1] = {	/* PCM in */ | 
|  | .stream = 1, | 
|  | .exclusive = 1, | 
|  | .r = { | 
|  | [0] = { | 
|  | .slots	= (1 << AC97_SLOT_PCM_LEFT) | | 
|  | (1 << AC97_SLOT_PCM_RIGHT), | 
|  | }, | 
|  | }, | 
|  | }, | 
|  | [2] = {	/* Mic in */ | 
|  | .stream = 1, | 
|  | .exclusive = 1, | 
|  | .r = { | 
|  | [0] = { | 
|  | .slots	= (1 << AC97_SLOT_MIC), | 
|  | }, | 
|  | }, | 
|  | } | 
|  | }; | 
|  |  | 
|  | static const struct snd_ac97_bus_ops aaci_bus_ops = { | 
|  | .write	= aaci_ac97_write, | 
|  | .read	= aaci_ac97_read, | 
|  | }; | 
|  |  | 
|  | static int aaci_probe_ac97(struct aaci *aaci) | 
|  | { | 
|  | struct snd_ac97_template ac97_template; | 
|  | struct snd_ac97_bus *ac97_bus; | 
|  | struct snd_ac97 *ac97; | 
|  | int ret; | 
|  |  | 
|  | /* | 
|  | * Assert AACIRESET for 2us | 
|  | */ | 
|  | writel(0, aaci->base + AACI_RESET); | 
|  | udelay(2); | 
|  | writel(RESET_NRST, aaci->base + AACI_RESET); | 
|  |  | 
|  | /* | 
|  | * Give the AC'97 codec more than enough time | 
|  | * to wake up. (42us = ~2 frames at 48kHz.) | 
|  | */ | 
|  | udelay(FRAME_PERIOD_US * 2); | 
|  |  | 
|  | ret = snd_ac97_bus(aaci->card, 0, &aaci_bus_ops, aaci, &ac97_bus); | 
|  | if (ret) | 
|  | goto out; | 
|  |  | 
|  | ac97_bus->clock = 48000; | 
|  | aaci->ac97_bus = ac97_bus; | 
|  |  | 
|  | memset(&ac97_template, 0, sizeof(struct snd_ac97_template)); | 
|  | ac97_template.private_data = aaci; | 
|  | ac97_template.num = 0; | 
|  | ac97_template.scaps = AC97_SCAP_SKIP_MODEM; | 
|  |  | 
|  | ret = snd_ac97_mixer(ac97_bus, &ac97_template, &ac97); | 
|  | if (ret) | 
|  | goto out; | 
|  | aaci->ac97 = ac97; | 
|  |  | 
|  | /* | 
|  | * Disable AC97 PC Beep input on audio codecs. | 
|  | */ | 
|  | if (ac97_is_audio(ac97)) | 
|  | snd_ac97_write_cache(ac97, AC97_PC_BEEP, 0x801e); | 
|  |  | 
|  | ret = snd_ac97_pcm_assign(ac97_bus, ARRAY_SIZE(ac97_defs), ac97_defs); | 
|  | if (ret) | 
|  | goto out; | 
|  |  | 
|  | aaci->playback.pcm = &ac97_bus->pcms[0]; | 
|  | aaci->capture.pcm  = &ac97_bus->pcms[1]; | 
|  |  | 
|  | out: | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static void aaci_free_card(struct snd_card *card) | 
|  | { | 
|  | struct aaci *aaci = card->private_data; | 
|  |  | 
|  | iounmap(aaci->base); | 
|  | } | 
|  |  | 
|  | static struct aaci *aaci_init_card(struct amba_device *dev) | 
|  | { | 
|  | struct aaci *aaci; | 
|  | struct snd_card *card; | 
|  | int err; | 
|  |  | 
|  | err = snd_card_new(&dev->dev, SNDRV_DEFAULT_IDX1, SNDRV_DEFAULT_STR1, | 
|  | THIS_MODULE, sizeof(struct aaci), &card); | 
|  | if (err < 0) | 
|  | return NULL; | 
|  |  | 
|  | card->private_free = aaci_free_card; | 
|  |  | 
|  | strscpy(card->driver, DRIVER_NAME, sizeof(card->driver)); | 
|  | strscpy(card->shortname, "ARM AC'97 Interface", sizeof(card->shortname)); | 
|  | snprintf(card->longname, sizeof(card->longname), | 
|  | "%s PL%03x rev%u at 0x%08llx, irq %d", | 
|  | card->shortname, amba_part(dev), amba_rev(dev), | 
|  | (unsigned long long)dev->res.start, dev->irq[0]); | 
|  |  | 
|  | aaci = card->private_data; | 
|  | mutex_init(&aaci->ac97_sem); | 
|  | mutex_init(&aaci->irq_lock); | 
|  | aaci->card = card; | 
|  | aaci->dev = dev; | 
|  |  | 
|  | /* Set MAINCR to allow slot 1 and 2 data IO */ | 
|  | aaci->maincr = MAINCR_IE | MAINCR_SL1RXEN | MAINCR_SL1TXEN | | 
|  | MAINCR_SL2RXEN | MAINCR_SL2TXEN; | 
|  |  | 
|  | return aaci; | 
|  | } | 
|  |  | 
|  | static int aaci_init_pcm(struct aaci *aaci) | 
|  | { | 
|  | struct snd_pcm *pcm; | 
|  | int ret; | 
|  |  | 
|  | ret = snd_pcm_new(aaci->card, "AACI AC'97", 0, 1, 1, &pcm); | 
|  | if (ret == 0) { | 
|  | aaci->pcm = pcm; | 
|  | pcm->private_data = aaci; | 
|  | pcm->info_flags = 0; | 
|  |  | 
|  | strscpy(pcm->name, DRIVER_NAME, sizeof(pcm->name)); | 
|  |  | 
|  | snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_PLAYBACK, &aaci_playback_ops); | 
|  | snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_CAPTURE, &aaci_capture_ops); | 
|  | snd_pcm_set_managed_buffer_all(pcm, SNDRV_DMA_TYPE_DEV, | 
|  | aaci->card->dev, | 
|  | 0, 64 * 1024); | 
|  | } | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static unsigned int aaci_size_fifo(struct aaci *aaci) | 
|  | { | 
|  | struct aaci_runtime *aacirun = &aaci->playback; | 
|  | int i; | 
|  |  | 
|  | /* | 
|  | * Enable the channel, but don't assign it to any slots, so | 
|  | * it won't empty onto the AC'97 link. | 
|  | */ | 
|  | writel(CR_FEN | CR_SZ16 | CR_EN, aacirun->base + AACI_TXCR); | 
|  |  | 
|  | for (i = 0; !(readl(aacirun->base + AACI_SR) & SR_TXFF) && i < 4096; i++) | 
|  | writel(0, aacirun->fifo); | 
|  |  | 
|  | writel(0, aacirun->base + AACI_TXCR); | 
|  |  | 
|  | /* | 
|  | * Re-initialise the AACI after the FIFO depth test, to | 
|  | * ensure that the FIFOs are empty.  Unfortunately, merely | 
|  | * disabling the channel doesn't clear the FIFO. | 
|  | */ | 
|  | writel(aaci->maincr & ~MAINCR_IE, aaci->base + AACI_MAINCR); | 
|  | readl(aaci->base + AACI_MAINCR); | 
|  | udelay(1); | 
|  | writel(aaci->maincr, aaci->base + AACI_MAINCR); | 
|  |  | 
|  | /* | 
|  | * If we hit 4096 entries, we failed.  Go back to the specified | 
|  | * fifo depth. | 
|  | */ | 
|  | if (i == 4096) | 
|  | i = 8; | 
|  |  | 
|  | return i; | 
|  | } | 
|  |  | 
|  | static int aaci_probe(struct amba_device *dev, | 
|  | const struct amba_id *id) | 
|  | { | 
|  | struct aaci *aaci; | 
|  | int ret, i; | 
|  |  | 
|  | ret = amba_request_regions(dev, NULL); | 
|  | if (ret) | 
|  | return ret; | 
|  |  | 
|  | aaci = aaci_init_card(dev); | 
|  | if (!aaci) { | 
|  | ret = -ENOMEM; | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | aaci->base = ioremap(dev->res.start, resource_size(&dev->res)); | 
|  | if (!aaci->base) { | 
|  | ret = -ENOMEM; | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Playback uses AACI channel 0 | 
|  | */ | 
|  | spin_lock_init(&aaci->playback.lock); | 
|  | aaci->playback.base = aaci->base + AACI_CSCH1; | 
|  | aaci->playback.fifo = aaci->base + AACI_DR1; | 
|  |  | 
|  | /* | 
|  | * Capture uses AACI channel 0 | 
|  | */ | 
|  | spin_lock_init(&aaci->capture.lock); | 
|  | aaci->capture.base = aaci->base + AACI_CSCH1; | 
|  | aaci->capture.fifo = aaci->base + AACI_DR1; | 
|  |  | 
|  | for (i = 0; i < 4; i++) { | 
|  | void __iomem *base = aaci->base + i * 0x14; | 
|  |  | 
|  | writel(0, base + AACI_IE); | 
|  | writel(0, base + AACI_TXCR); | 
|  | writel(0, base + AACI_RXCR); | 
|  | } | 
|  |  | 
|  | writel(0x1fff, aaci->base + AACI_INTCLR); | 
|  | writel(aaci->maincr, aaci->base + AACI_MAINCR); | 
|  | /* | 
|  | * Fix: ac97 read back fail errors by reading | 
|  | * from any arbitrary aaci register. | 
|  | */ | 
|  | readl(aaci->base + AACI_CSCH1); | 
|  | ret = aaci_probe_ac97(aaci); | 
|  | if (ret) | 
|  | goto out; | 
|  |  | 
|  | /* | 
|  | * Size the FIFOs (must be multiple of 16). | 
|  | * This is the number of entries in the FIFO. | 
|  | */ | 
|  | aaci->fifo_depth = aaci_size_fifo(aaci); | 
|  | if (aaci->fifo_depth & 15) { | 
|  | printk(KERN_WARNING "AACI: FIFO depth %d not supported\n", | 
|  | aaci->fifo_depth); | 
|  | ret = -ENODEV; | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | ret = aaci_init_pcm(aaci); | 
|  | if (ret) | 
|  | goto out; | 
|  |  | 
|  | ret = snd_card_register(aaci->card); | 
|  | if (ret == 0) { | 
|  | dev_info(&dev->dev, "%s\n", aaci->card->longname); | 
|  | dev_info(&dev->dev, "FIFO %u entries\n", aaci->fifo_depth); | 
|  | amba_set_drvdata(dev, aaci->card); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | out: | 
|  | if (aaci) | 
|  | snd_card_free(aaci->card); | 
|  | amba_release_regions(dev); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static void aaci_remove(struct amba_device *dev) | 
|  | { | 
|  | struct snd_card *card = amba_get_drvdata(dev); | 
|  |  | 
|  | if (card) { | 
|  | struct aaci *aaci = card->private_data; | 
|  | writel(0, aaci->base + AACI_MAINCR); | 
|  |  | 
|  | snd_card_free(card); | 
|  | amba_release_regions(dev); | 
|  | } | 
|  | } | 
|  |  | 
|  | static struct amba_id aaci_ids[] = { | 
|  | { | 
|  | .id	= 0x00041041, | 
|  | .mask	= 0x000fffff, | 
|  | }, | 
|  | { 0, 0 }, | 
|  | }; | 
|  |  | 
|  | MODULE_DEVICE_TABLE(amba, aaci_ids); | 
|  |  | 
|  | static struct amba_driver aaci_driver = { | 
|  | .drv		= { | 
|  | .name	= DRIVER_NAME, | 
|  | .pm	= AACI_DEV_PM_OPS, | 
|  | }, | 
|  | .probe		= aaci_probe, | 
|  | .remove		= aaci_remove, | 
|  | .id_table	= aaci_ids, | 
|  | }; | 
|  |  | 
|  | module_amba_driver(aaci_driver); | 
|  |  | 
|  | MODULE_LICENSE("GPL"); | 
|  | MODULE_DESCRIPTION("ARM PrimeCell PL041 Advanced Audio CODEC Interface driver"); |