| # SPDX-License-Identifier: GPL-2.0-only |
| # ALSA USB drivers |
| |
| menuconfig SND_USB |
| bool "USB sound devices" |
| depends on USB |
| default y |
| help |
| Support for sound devices connected via the USB bus. |
| |
| if SND_USB && USB |
| |
| config SND_USB_AUDIO |
| tristate "USB Audio/MIDI driver" |
| select SND_HWDEP |
| select SND_RAWMIDI |
| select SND_PCM |
| select SND_UMP if SND_USB_AUDIO_MIDI_V2 |
| select BITREVERSE |
| select SND_USB_AUDIO_USE_MEDIA_CONTROLLER if MEDIA_CONTROLLER && (MEDIA_SUPPORT=y || MEDIA_SUPPORT=SND_USB_AUDIO) |
| help |
| Say Y here to include support for USB audio and USB MIDI |
| devices. |
| |
| To compile this driver as a module, choose M here: the module |
| will be called snd-usb-audio. |
| |
| config SND_USB_AUDIO_MIDI_V2 |
| bool "MIDI 2.0 support by USB Audio driver" |
| depends on SND_USB_AUDIO |
| help |
| Say Y here to include the support for MIDI 2.0 by USB Audio driver. |
| When the config is set, the driver tries to probe MIDI 2.0 interface |
| at first, then falls back to MIDI 1.0 interface as default. |
| The MIDI 2.0 support can be disabled dynamically via midi2_enable |
| module option, too. |
| |
| config SND_USB_AUDIO_USE_MEDIA_CONTROLLER |
| bool |
| |
| config SND_USB_UA101 |
| tristate "Edirol UA-101/UA-1000 driver" |
| select SND_PCM |
| select SND_RAWMIDI |
| help |
| Say Y here to include support for the Edirol UA-101 and UA-1000 |
| audio/MIDI interfaces. |
| |
| To compile this driver as a module, choose M here: the module |
| will be called snd-ua101. |
| |
| config SND_USB_USX2Y |
| tristate "Tascam US-122, US-224 and US-428 USB driver" |
| depends on X86 || PPC || ALPHA |
| select SND_HWDEP |
| select SND_RAWMIDI |
| select SND_PCM |
| help |
| Say Y here to include support for Tascam USB Audio/MIDI |
| interfaces or controllers US-122, US-224 and US-428. |
| |
| To compile this driver as a module, choose M here: the module |
| will be called snd-usb-usx2y. |
| |
| config SND_USB_CAIAQ |
| tristate "Native Instruments USB audio devices" |
| select SND_HWDEP |
| select SND_RAWMIDI |
| select SND_PCM |
| help |
| Say Y here to include support for caiaq USB audio interfaces, |
| namely: |
| |
| * Native Instruments RigKontrol2 |
| * Native Instruments RigKontrol3 |
| * Native Instruments Kore Controller |
| * Native Instruments Kore Controller 2 |
| * Native Instruments Audio Kontrol 1 |
| * Native Instruments Audio 2 DJ |
| * Native Instruments Audio 4 DJ |
| * Native Instruments Audio 8 DJ |
| * Native Instruments Traktor Audio 2 |
| * Native Instruments Guitar Rig Session I/O |
| * Native Instruments Guitar Rig mobile |
| * Native Instruments Traktor Kontrol X1 |
| * Native Instruments Traktor Kontrol S4 |
| * Native Instruments Maschine Controller |
| |
| To compile this driver as a module, choose M here: the module |
| will be called snd-usb-caiaq. |
| |
| config SND_USB_CAIAQ_INPUT |
| bool "enable input device for controllers" |
| depends on SND_USB_CAIAQ |
| depends on INPUT=y || INPUT=SND_USB_CAIAQ |
| help |
| Say Y here to support input controllers like buttons, knobs, |
| alpha dials and analog pedals on the following products: |
| |
| * Native Instruments RigKontrol2 |
| * Native Instruments RigKontrol3 |
| * Native Instruments Kore Controller |
| * Native Instruments Kore Controller 2 |
| * Native Instruments Audio Kontrol 1 |
| * Native Instruments Traktor Kontrol S4 |
| * Native Instruments Maschine Controller |
| |
| config SND_USB_US122L |
| tristate "Tascam US-122L USB driver" |
| depends on X86 || COMPILE_TEST |
| select SND_HWDEP |
| select SND_RAWMIDI |
| help |
| Say Y here to include support for Tascam US-122L USB Audio/MIDI |
| interfaces. |
| |
| To compile this driver as a module, choose M here: the module |
| will be called snd-usb-us122l. |
| |
| config SND_USB_6FIRE |
| tristate "TerraTec DMX 6Fire USB" |
| select FW_LOADER |
| select BITREVERSE |
| select SND_RAWMIDI |
| select SND_PCM |
| select SND_VMASTER |
| help |
| Say Y here to include support for TerraTec 6fire DMX USB interface. |
| |
| You will need firmware files in order to be able to use the device |
| after it has been coldstarted. An install script for the firmware |
| and further help can be found at |
| http://sixfireusb.sourceforge.net |
| |
| config SND_USB_HIFACE |
| tristate "M2Tech hiFace USB-SPDIF driver" |
| select SND_PCM |
| help |
| Select this option to include support for M2Tech hiFace USB-SPDIF |
| interface. |
| |
| This driver supports the original M2Tech hiFace and some other |
| compatible devices. The supported products are: |
| |
| * M2Tech Young |
| * M2Tech hiFace |
| * M2Tech North Star |
| * M2Tech W4S Young |
| * M2Tech Corrson |
| * M2Tech AUDIA |
| * M2Tech SL Audio |
| * M2Tech Empirical |
| * M2Tech Rockna |
| * M2Tech Pathos |
| * M2Tech Metronome |
| * M2Tech CAD |
| * M2Tech Audio Esclusive |
| * M2Tech Rotel |
| * M2Tech Eeaudio |
| * The Chord Company CHORD |
| * AVA Group A/S Vitus |
| |
| To compile this driver as a module, choose M here: the module |
| will be called snd-usb-hiface. |
| |
| config SND_BCD2000 |
| tristate "Behringer BCD2000 MIDI driver" |
| select SND_RAWMIDI |
| help |
| Say Y here to include MIDI support for the Behringer BCD2000 DJ |
| controller. |
| |
| Audio support is still work-in-progress at |
| https://github.com/anyc/snd-usb-bcd2000 |
| |
| To compile this driver as a module, choose M here: the module |
| will be called snd-bcd2000. |
| |
| config SND_USB_AUDIO_QMI |
| tristate "Qualcomm Audio Offload driver" |
| depends on QCOM_QMI_HELPERS && SND_USB_AUDIO && SND_SOC_USB |
| depends on USB_XHCI_HCD && USB_XHCI_SIDEBAND |
| help |
| Say Y here to enable the Qualcomm USB audio offloading feature. |
| |
| This module sets up the required QMI stream enable/disable |
| responses to requests generated by the audio DSP. It passes the |
| USB transfer resource references, so that the audio DSP can issue |
| USB transfers to the host controller. |
| |
| To compile this driver as a module, choose M here: the module |
| will be called snd-usb-audio-qmi. |
| |
| source "sound/usb/line6/Kconfig" |
| |
| endif # SND_USB |
| |
