| # SPDX-License-Identifier: GPL-2.0-only | 
 |  | 
 | config DRM_MSM | 
 | 	tristate "MSM DRM" | 
 | 	depends on DRM | 
 | 	depends on ARCH_QCOM || SOC_IMX5 || COMPILE_TEST | 
 | 	depends on COMMON_CLK | 
 | 	depends on IOMMU_SUPPORT | 
 | 	depends on OF | 
 | 	depends on QCOM_AOSS_QMP || QCOM_AOSS_QMP=n | 
 | 	depends on QCOM_OCMEM || QCOM_OCMEM=n | 
 | 	depends on QCOM_LLCC || QCOM_LLCC=n | 
 | 	depends on QCOM_COMMAND_DB || QCOM_COMMAND_DB=n | 
 | 	depends on PM | 
 | 	select IOMMU_IO_PGTABLE | 
 | 	select QCOM_MDT_LOADER if ARCH_QCOM | 
 | 	select REGULATOR | 
 | 	select DRM_EXEC | 
 | 	select DRM_GPUVM | 
 | 	select DRM_SCHED | 
 | 	select SHMEM | 
 | 	select TMPFS | 
 | 	select QCOM_SCM | 
 | 	select QCOM_UBWC_CONFIG | 
 | 	select WANT_DEV_COREDUMP | 
 | 	select SND_SOC_HDMI_CODEC if SND_SOC | 
 | 	select SYNC_FILE | 
 | 	select PM_OPP | 
 | 	select NVMEM | 
 | 	select PM_GENERIC_DOMAINS | 
 | 	select TRACE_GPU_MEM | 
 | 	help | 
 | 	  DRM/KMS driver for MSM/snapdragon. | 
 |  | 
 | config DRM_MSM_GPU_STATE | 
 | 	bool | 
 | 	depends on DRM_MSM && (DEBUG_FS || DEV_COREDUMP) | 
 | 	default y | 
 |  | 
 | config DRM_MSM_GPU_SUDO | 
 | 	bool "Enable SUDO flag on submits" | 
 | 	depends on DRM_MSM && EXPERT | 
 | 	default n | 
 | 	help | 
 | 	  Enable userspace that has CAP_SYS_RAWIO to submit GPU commands | 
 | 	  that are run from RB instead of IB1.  This essentially gives | 
 | 	  userspace kernel level access, but is useful for firmware | 
 | 	  debugging. | 
 |  | 
 | 	  Only use this if you are a driver developer.  This should *not* | 
 | 	  be enabled for production kernels.  If unsure, say N. | 
 |  | 
 | config DRM_MSM_VALIDATE_XML | 
 | 	bool "Validate XML register files against schema" | 
 | 	depends on DRM_MSM && EXPERT | 
 | 	depends on $(success,$(PYTHON3) -c "import lxml") | 
 | 	help | 
 | 	  Validate XML files with register definitions against rules-fd schema. | 
 | 	  This option is mostly targeting DRM MSM developers. If unsure, say N. | 
 |  | 
 | config DRM_MSM_KMS | 
 | 	def_bool n | 
 | 	depends on DRM_MSM | 
 | 	select DRM_BRIDGE | 
 | 	select DRM_BRIDGE_CONNECTOR | 
 | 	select DRM_CLIENT_SELECTION | 
 | 	select DRM_DISPLAY_HELPER | 
 | 	select DRM_KMS_HELPER | 
 | 	select DRM_PANEL | 
 | 	select DRM_PANEL_BRIDGE | 
 |  | 
 | config DRM_MSM_KMS_FBDEV | 
 | 	def_bool DRM_FBDEV_EMULATION | 
 | 	depends on DRM_MSM_KMS | 
 | 	select FB_SYSMEM_HELPERS | 
 |  | 
 | config DRM_MSM_MDSS | 
 | 	bool | 
 | 	depends on DRM_MSM | 
 | 	default n | 
 |  | 
 | config DRM_MSM_MDP4 | 
 | 	bool "Enable MDP4 support in MSM DRM driver" | 
 | 	depends on DRM_MSM | 
 | 	select DRM_MSM_KMS | 
 | 	default y | 
 | 	help | 
 | 	  Compile in support for the Mobile Display Processor v4 (MDP4) in | 
 | 	  the MSM DRM driver. It is the older display controller found in | 
 | 	  devices using APQ8064/MSM8960/MSM8x60 platforms. | 
 |  | 
 | config DRM_MSM_MDP5 | 
 | 	bool "Enable MDP5 support in MSM DRM driver" | 
 | 	depends on DRM_MSM | 
 | 	select DRM_MSM_MDSS | 
 | 	select DRM_MSM_KMS | 
 | 	default y | 
 | 	help | 
 | 	  Compile in support for the Mobile Display Processor v5 (MDP5) in | 
 | 	  the MSM DRM driver. It is the display controller found in devices | 
 | 	  using e.g. APQ8016/MSM8916/APQ8096/MSM8996/MSM8974/SDM6x0 platforms. | 
 |  | 
 | config DRM_MSM_DPU | 
 | 	bool "Enable DPU support in MSM DRM driver" | 
 | 	depends on DRM_MSM | 
 | 	select DRM_MSM_MDSS | 
 | 	select DRM_MSM_KMS | 
 | 	select DRM_DISPLAY_DSC_HELPER | 
 | 	default y | 
 | 	help | 
 | 	  Compile in support for the Display Processing Unit in | 
 | 	  the MSM DRM driver. It is the display controller found in devices | 
 | 	  using e.g. SDM845 and newer platforms. | 
 |  | 
 | config DRM_MSM_DP | 
 | 	bool "Enable DisplayPort support in MSM DRM driver" | 
 | 	depends on DRM_MSM | 
 | 	depends on DRM_MSM_KMS | 
 | 	select DRM_DISPLAY_HDMI_AUDIO_HELPER | 
 | 	select RATIONAL | 
 | 	select DRM_DISPLAY_DP_AUX_BUS | 
 | 	select DRM_DISPLAY_DP_HELPER | 
 | 	default y | 
 | 	help | 
 | 	  Compile in support for DP driver in MSM DRM driver. DP external | 
 | 	  display support is enabled through this config option. It can | 
 | 	  be primary or secondary display on device. | 
 |  | 
 | config DRM_MSM_DSI | 
 | 	bool "Enable DSI support in MSM DRM driver" | 
 | 	depends on DRM_MSM | 
 | 	depends on DRM_MSM_KMS | 
 | 	select DRM_PANEL | 
 | 	select DRM_MIPI_DSI | 
 | 	select DRM_DISPLAY_DSC_HELPER | 
 | 	default y | 
 | 	help | 
 | 	  Choose this option if you have a need for MIPI DSI connector | 
 | 	  support. | 
 |  | 
 | config DRM_MSM_DSI_28NM_PHY | 
 | 	bool "Enable DSI 28nm PHY driver in MSM DRM" | 
 | 	depends on DRM_MSM_DSI | 
 | 	default y | 
 | 	help | 
 | 	  Choose this option if the 28nm DSI PHY is used on the platform. | 
 |  | 
 | config DRM_MSM_DSI_20NM_PHY | 
 | 	bool "Enable DSI 20nm PHY driver in MSM DRM" | 
 | 	depends on DRM_MSM_DSI | 
 | 	default y | 
 | 	help | 
 | 	  Choose this option if the 20nm DSI PHY is used on the platform. | 
 |  | 
 | config DRM_MSM_DSI_28NM_8960_PHY | 
 | 	bool "Enable DSI 28nm 8960 PHY driver in MSM DRM" | 
 | 	depends on DRM_MSM_DSI | 
 | 	default y | 
 | 	help | 
 | 	  Choose this option if the 28nm DSI PHY 8960 variant is used on the | 
 | 	  platform. | 
 |  | 
 | config DRM_MSM_DSI_14NM_PHY | 
 | 	bool "Enable DSI 14nm PHY driver in MSM DRM (used by MSM8996/APQ8096)" | 
 | 	depends on DRM_MSM_DSI | 
 | 	default y | 
 | 	help | 
 | 	  Choose this option if DSI PHY on 8996 is used on the platform. | 
 |  | 
 | config DRM_MSM_DSI_10NM_PHY | 
 | 	bool "Enable DSI 10nm PHY driver in MSM DRM (used by SDM845)" | 
 | 	depends on DRM_MSM_DSI | 
 | 	default y | 
 | 	help | 
 | 	  Choose this option if DSI PHY on SDM845 is used on the platform. | 
 |  | 
 | config DRM_MSM_DSI_7NM_PHY | 
 | 	bool "Enable DSI 7nm/5nm/4nm PHY driver in MSM DRM" | 
 | 	depends on DRM_MSM_DSI | 
 | 	default y | 
 | 	help | 
 | 	  Choose this option if DSI PHY on SM8150/SM8250/SM8350/SM8450/SM8550/SC7280 | 
 | 	  is used on the platform. | 
 |  | 
 | config DRM_MSM_HDMI | 
 | 	bool "Enable HDMI support in MSM DRM driver" | 
 | 	depends on DRM_MSM | 
 | 	depends on DRM_MSM_KMS | 
 | 	default y | 
 | 	select DRM_DISPLAY_HDMI_HELPER | 
 | 	select DRM_DISPLAY_HDMI_STATE_HELPER | 
 | 	help | 
 | 	  Compile in support for the HDMI output MSM DRM driver. It can | 
 | 	  be a primary or a secondary display on device. Note that this is used | 
 | 	  only for the direct HDMI output. If the device outputs HDMI data | 
 | 	  through some kind of DSI-to-HDMI bridge, this option can be disabled. | 
 |  | 
 | config DRM_MSM_HDMI_HDCP | 
 | 	bool "Enable HDMI HDCP support in MSM DRM driver" | 
 | 	depends on DRM_MSM && DRM_MSM_HDMI | 
 | 	default y | 
 | 	help | 
 | 	  Choose this option to enable HDCP state machine |