| // SPDX-License-Identifier: BSD-3-Clause |
| /* |
| * Copyright (c) 2022, Linaro Limited |
| */ |
| |
| #include <dt-bindings/input/input.h> |
| #include <dt-bindings/interrupt-controller/irq.h> |
| #include <dt-bindings/spmi/spmi.h> |
| |
| &spmi_bus { |
| pmk8280: pmic@0 { |
| compatible = "qcom,pmk8350", "qcom,spmi-pmic"; |
| reg = <0x0 SPMI_USID>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| pmk8280_pon: pon@1300 { |
| compatible = "qcom,pm8998-pon"; |
| reg = <0x1300>; |
| |
| pmk8280_pon_pwrkey: pwrkey { |
| compatible = "qcom,pmk8350-pwrkey"; |
| interrupts = <0x0 0x13 0x7 IRQ_TYPE_EDGE_BOTH>; |
| linux,code = <KEY_POWER>; |
| status = "disabled"; |
| }; |
| }; |
| }; |
| |
| pmc8280_1: pmic@1 { |
| compatible = "qcom,pm8350", "qcom,spmi-pmic"; |
| reg = <0x1 SPMI_USID>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| pmc8280_1_gpios: gpio@8800 { |
| compatible = "qcom,pm8350-gpio", "qcom,spmi-gpio"; |
| reg = <0x8800>; |
| gpio-controller; |
| gpio-ranges = <&pmc8280_1_gpios 0 0 10>; |
| #gpio-cells = <2>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| }; |
| |
| pmc8280c: pmic@2 { |
| compatible = "qcom,pm8350c", "qcom,spmi-pmic"; |
| reg = <0x2 SPMI_USID>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| pmc8280c_gpios: gpio@8800 { |
| compatible = "qcom,pm8350c-gpio", "qcom,spmi-gpio"; |
| reg = <0x8800>; |
| gpio-controller; |
| gpio-ranges = <&pmc8280c_gpios 0 0 9>; |
| #gpio-cells = <2>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| |
| pmc8280c_lpg: pwm { |
| compatible = "qcom,pm8350c-pwm"; |
| |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| #pwm-cells = <2>; |
| |
| status = "disabled"; |
| }; |
| }; |
| |
| pmc8280_2: pmic@3 { |
| compatible = "qcom,pm8350", "qcom,spmi-pmic"; |
| reg = <0x3 SPMI_USID>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| pmc8280_2_gpios: gpio@8800 { |
| compatible = "qcom,pm8350-gpio", "qcom,spmi-gpio"; |
| reg = <0x8800>; |
| gpio-controller; |
| gpio-ranges = <&pmc8280_2_gpios 0 0 10>; |
| #gpio-cells = <2>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| }; |
| |
| pmr735a: pmic@4 { |
| compatible = "qcom,pmr735a", "qcom,spmi-pmic"; |
| reg = <0x4 SPMI_USID>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| pmr735a_gpios: gpio@8800 { |
| compatible = "qcom,pmr735a-gpio", "qcom,spmi-gpio"; |
| reg = <0x8800>; |
| gpio-controller; |
| gpio-ranges = <&pmr735a_gpios 0 0 4>; |
| #gpio-cells = <2>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| }; |
| }; |
