blob: e499f96506c521ee1212ae87e2d5103e53b2f71e [file] [log] [blame]
// SPDX-License-Identifier: GPL-2.0-or-later
/*
* Synopsys DesignWare I2C adapter driver (master only).
*
* Based on the TI DAVINCI I2C adapter driver.
*
* Copyright (C) 2006 Texas Instruments.
* Copyright (C) 2007 MontaVista Software Inc.
* Copyright (C) 2009 Provigent Ltd.
* Copyright (C) 2011, 2015, 2016 Intel Corporation.
*/
#include <linux/acpi.h>
#include <linux/delay.h>
#include <linux/err.h>
#include <linux/errno.h>
#include <linux/i2c.h>
#include <linux/interrupt.h>
#include <linux/io.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/pci.h>
#include <linux/pm_runtime.h>
#include <linux/sched.h>
#include <linux/slab.h>
#include "i2c-designware-core.h"
#include "i2c-ccgx-ucsi.h"
#define DRIVER_NAME "i2c-designware-pci"
enum dw_pci_ctl_id_t {
medfield,
merrifield,
baytrail,
cherrytrail,
haswell,
elkhartlake,
navi_amd,
};
/*
* This is a legacy structure to describe the hardware counters
* to configure signal timings on the bus. For Device Tree platforms
* one should use the respective properties and for ACPI there is
* a set of ACPI methods that provide these counters. No new
* platform should use this structure.
*/
struct dw_scl_sda_cfg {
u16 ss_hcnt;
u16 fs_hcnt;
u16 ss_lcnt;
u16 fs_lcnt;
u32 sda_hold;
};
struct dw_pci_controller {
u32 bus_num;
u32 flags;
struct dw_scl_sda_cfg *scl_sda_cfg;
int (*setup)(struct pci_dev *pdev, struct dw_pci_controller *c);
u32 (*get_clk_rate_khz)(struct dw_i2c_dev *dev);
};
/* Merrifield HCNT/LCNT/SDA hold time */
static struct dw_scl_sda_cfg mrfld_config = {
.ss_hcnt = 0x2f8,
.fs_hcnt = 0x87,
.ss_lcnt = 0x37b,
.fs_lcnt = 0x10a,
};
/* BayTrail HCNT/LCNT/SDA hold time */
static struct dw_scl_sda_cfg byt_config = {
.ss_hcnt = 0x200,
.fs_hcnt = 0x55,
.ss_lcnt = 0x200,
.fs_lcnt = 0x99,
.sda_hold = 0x6,
};
/* Haswell HCNT/LCNT/SDA hold time */
static struct dw_scl_sda_cfg hsw_config = {
.ss_hcnt = 0x01b0,
.fs_hcnt = 0x48,
.ss_lcnt = 0x01fb,
.fs_lcnt = 0xa0,
.sda_hold = 0x9,
};
/* NAVI-AMD HCNT/LCNT/SDA hold time */
static struct dw_scl_sda_cfg navi_amd_config = {
.ss_hcnt = 0x1ae,
.ss_lcnt = 0x23a,
.sda_hold = 0x9,
};
static u32 mfld_get_clk_rate_khz(struct dw_i2c_dev *dev)
{
return 25000;
}
static int mfld_setup(struct pci_dev *pdev, struct dw_pci_controller *c)
{
struct dw_i2c_dev *dev = dev_get_drvdata(&pdev->dev);
switch (pdev->device) {
case 0x0817:
dev->timings.bus_freq_hz = I2C_MAX_STANDARD_MODE_FREQ;
fallthrough;
case 0x0818:
case 0x0819:
c->bus_num = pdev->device - 0x817 + 3;
return 0;
case 0x082C:
case 0x082D:
case 0x082E:
c->bus_num = pdev->device - 0x82C + 0;
return 0;
}
return -ENODEV;
}
static int mrfld_setup(struct pci_dev *pdev, struct dw_pci_controller *c)
{
/*
* On Intel Merrifield the user visible i2c buses are enumerated
* [1..7]. So, we add 1 to shift the default range. Besides that the
* first PCI slot provides 4 functions, that's why we have to add 0 to
* the first slot and 4 to the next one.
*/
switch (PCI_SLOT(pdev->devfn)) {
case 8:
c->bus_num = PCI_FUNC(pdev->devfn) + 0 + 1;
return 0;
case 9:
c->bus_num = PCI_FUNC(pdev->devfn) + 4 + 1;
return 0;
}
return -ENODEV;
}
static u32 ehl_get_clk_rate_khz(struct dw_i2c_dev *dev)
{
return 100000;
}
static u32 navi_amd_get_clk_rate_khz(struct dw_i2c_dev *dev)
{
return 100000;
}
static int navi_amd_setup(struct pci_dev *pdev, struct dw_pci_controller *c)
{
struct dw_i2c_dev *dev = dev_get_drvdata(&pdev->dev);
dev->flags |= MODEL_AMD_NAVI_GPU;
dev->timings.bus_freq_hz = I2C_MAX_STANDARD_MODE_FREQ;
return 0;
}
static struct dw_pci_controller dw_pci_controllers[] = {
[medfield] = {
.bus_num = -1,
.setup = mfld_setup,
.get_clk_rate_khz = mfld_get_clk_rate_khz,
},
[merrifield] = {
.bus_num = -1,
.scl_sda_cfg = &mrfld_config,
.setup = mrfld_setup,
},
[baytrail] = {
.bus_num = -1,
.scl_sda_cfg = &byt_config,
},
[haswell] = {
.bus_num = -1,
.scl_sda_cfg = &hsw_config,
},
[cherrytrail] = {
.bus_num = -1,
.scl_sda_cfg = &byt_config,
},
[elkhartlake] = {
.bus_num = -1,
.get_clk_rate_khz = ehl_get_clk_rate_khz,
},
[navi_amd] = {
.bus_num = -1,
.scl_sda_cfg = &navi_amd_config,
.setup = navi_amd_setup,
.get_clk_rate_khz = navi_amd_get_clk_rate_khz,
},
};
static int __maybe_unused i2c_dw_pci_runtime_suspend(struct device *dev)
{
struct dw_i2c_dev *i_dev = dev_get_drvdata(dev);
i_dev->disable(i_dev);
return 0;
}
static int __maybe_unused i2c_dw_pci_suspend(struct device *dev)
{
struct dw_i2c_dev *i_dev = dev_get_drvdata(dev);
i2c_mark_adapter_suspended(&i_dev->adapter);
return i2c_dw_pci_runtime_suspend(dev);
}
static int __maybe_unused i2c_dw_pci_runtime_resume(struct device *dev)
{
struct dw_i2c_dev *i_dev = dev_get_drvdata(dev);
return i_dev->init(i_dev);
}
static int __maybe_unused i2c_dw_pci_resume(struct device *dev)
{
struct dw_i2c_dev *i_dev = dev_get_drvdata(dev);
int ret;
ret = i2c_dw_pci_runtime_resume(dev);
i2c_mark_adapter_resumed(&i_dev->adapter);
return ret;
}
static const struct dev_pm_ops i2c_dw_pm_ops = {
SET_SYSTEM_SLEEP_PM_OPS(i2c_dw_pci_suspend, i2c_dw_pci_resume)
SET_RUNTIME_PM_OPS(i2c_dw_pci_runtime_suspend, i2c_dw_pci_runtime_resume, NULL)
};
static int i2c_dw_pci_probe(struct pci_dev *pdev,
const struct pci_device_id *id)
{
struct dw_i2c_dev *dev;
struct i2c_adapter *adap;
int r;
struct dw_pci_controller *controller;
struct dw_scl_sda_cfg *cfg;
struct i2c_timings *t;
if (id->driver_data >= ARRAY_SIZE(dw_pci_controllers))
return dev_err_probe(&pdev->dev, -EINVAL,
"Invalid driver data %ld\n",
id->driver_data);
controller = &dw_pci_controllers[id->driver_data];
r = pcim_enable_device(pdev);
if (r)
return dev_err_probe(&pdev->dev, r,
"Failed to enable I2C PCI device\n");
pci_set_master(pdev);
r = pcim_iomap_regions(pdev, 1 << 0, pci_name(pdev));
if (r)
return dev_err_probe(&pdev->dev, r,
"I/O memory remapping failed\n");
dev = devm_kzalloc(&pdev->dev, sizeof(*dev), GFP_KERNEL);
if (!dev)
return -ENOMEM;
r = pci_alloc_irq_vectors(pdev, 1, 1, PCI_IRQ_ALL_TYPES);
if (r < 0)
return r;
dev->get_clk_rate_khz = controller->get_clk_rate_khz;
dev->base = pcim_iomap_table(pdev)[0];
dev->dev = &pdev->dev;
dev->irq = pci_irq_vector(pdev, 0);
dev->flags |= controller->flags;
t = &dev->timings;
i2c_parse_fw_timings(&pdev->dev, t, false);
pci_set_drvdata(pdev, dev);
if (controller->setup) {
r = controller->setup(pdev, controller);
if (r) {
pci_free_irq_vectors(pdev);
return r;
}
}
i2c_dw_adjust_bus_speed(dev);
if (has_acpi_companion(&pdev->dev))
i2c_dw_acpi_configure(&pdev->dev);
r = i2c_dw_validate_speed(dev);
if (r) {
pci_free_irq_vectors(pdev);
return r;
}
i2c_dw_configure(dev);
if (controller->scl_sda_cfg) {
cfg = controller->scl_sda_cfg;
dev->ss_hcnt = cfg->ss_hcnt;
dev->fs_hcnt = cfg->fs_hcnt;
dev->ss_lcnt = cfg->ss_lcnt;
dev->fs_lcnt = cfg->fs_lcnt;
dev->sda_hold_time = cfg->sda_hold;
}
adap = &dev->adapter;
adap->owner = THIS_MODULE;
adap->class = 0;
ACPI_COMPANION_SET(&adap->dev, ACPI_COMPANION(&pdev->dev));
adap->nr = controller->bus_num;
r = i2c_dw_probe(dev);
if (r) {
pci_free_irq_vectors(pdev);
return r;
}
if ((dev->flags & MODEL_MASK) == MODEL_AMD_NAVI_GPU) {
dev->slave = i2c_new_ccgx_ucsi(&dev->adapter, dev->irq, NULL);
if (IS_ERR(dev->slave))
return dev_err_probe(dev->dev, PTR_ERR(dev->slave),
"register UCSI failed\n");
}
pm_runtime_set_autosuspend_delay(&pdev->dev, 1000);
pm_runtime_use_autosuspend(&pdev->dev);
pm_runtime_put_autosuspend(&pdev->dev);
pm_runtime_allow(&pdev->dev);
return 0;
}
static void i2c_dw_pci_remove(struct pci_dev *pdev)
{
struct dw_i2c_dev *dev = pci_get_drvdata(pdev);
dev->disable(dev);
pm_runtime_forbid(&pdev->dev);
pm_runtime_get_noresume(&pdev->dev);
i2c_del_adapter(&dev->adapter);
devm_free_irq(&pdev->dev, dev->irq, dev);
pci_free_irq_vectors(pdev);
}
static const struct pci_device_id i2_designware_pci_ids[] = {
/* Medfield */
{ PCI_VDEVICE(INTEL, 0x0817), medfield },
{ PCI_VDEVICE(INTEL, 0x0818), medfield },
{ PCI_VDEVICE(INTEL, 0x0819), medfield },
{ PCI_VDEVICE(INTEL, 0x082C), medfield },
{ PCI_VDEVICE(INTEL, 0x082D), medfield },
{ PCI_VDEVICE(INTEL, 0x082E), medfield },
/* Merrifield */
{ PCI_VDEVICE(INTEL, 0x1195), merrifield },
{ PCI_VDEVICE(INTEL, 0x1196), merrifield },
/* Baytrail */
{ PCI_VDEVICE(INTEL, 0x0F41), baytrail },
{ PCI_VDEVICE(INTEL, 0x0F42), baytrail },
{ PCI_VDEVICE(INTEL, 0x0F43), baytrail },
{ PCI_VDEVICE(INTEL, 0x0F44), baytrail },
{ PCI_VDEVICE(INTEL, 0x0F45), baytrail },
{ PCI_VDEVICE(INTEL, 0x0F46), baytrail },
{ PCI_VDEVICE(INTEL, 0x0F47), baytrail },
/* Haswell */
{ PCI_VDEVICE(INTEL, 0x9c61), haswell },
{ PCI_VDEVICE(INTEL, 0x9c62), haswell },
/* Braswell / Cherrytrail */
{ PCI_VDEVICE(INTEL, 0x22C1), cherrytrail },
{ PCI_VDEVICE(INTEL, 0x22C2), cherrytrail },
{ PCI_VDEVICE(INTEL, 0x22C3), cherrytrail },
{ PCI_VDEVICE(INTEL, 0x22C4), cherrytrail },
{ PCI_VDEVICE(INTEL, 0x22C5), cherrytrail },
{ PCI_VDEVICE(INTEL, 0x22C6), cherrytrail },
{ PCI_VDEVICE(INTEL, 0x22C7), cherrytrail },
/* Elkhart Lake (PSE I2C) */
{ PCI_VDEVICE(INTEL, 0x4bb9), elkhartlake },
{ PCI_VDEVICE(INTEL, 0x4bba), elkhartlake },
{ PCI_VDEVICE(INTEL, 0x4bbb), elkhartlake },
{ PCI_VDEVICE(INTEL, 0x4bbc), elkhartlake },
{ PCI_VDEVICE(INTEL, 0x4bbd), elkhartlake },
{ PCI_VDEVICE(INTEL, 0x4bbe), elkhartlake },
{ PCI_VDEVICE(INTEL, 0x4bbf), elkhartlake },
{ PCI_VDEVICE(INTEL, 0x4bc0), elkhartlake },
/* AMD NAVI */
{ PCI_VDEVICE(ATI, 0x7314), navi_amd },
{ PCI_VDEVICE(ATI, 0x73a4), navi_amd },
{ PCI_VDEVICE(ATI, 0x73e4), navi_amd },
{ PCI_VDEVICE(ATI, 0x73c4), navi_amd },
{ 0,}
};
MODULE_DEVICE_TABLE(pci, i2_designware_pci_ids);
static struct pci_driver dw_i2c_driver = {
.name = DRIVER_NAME,
.id_table = i2_designware_pci_ids,
.probe = i2c_dw_pci_probe,
.remove = i2c_dw_pci_remove,
.driver = {
.pm = &i2c_dw_pm_ops,
},
};
module_pci_driver(dw_i2c_driver);
/* Work with hotplug and coldplug */
MODULE_ALIAS("i2c_designware-pci");
MODULE_AUTHOR("Baruch Siach <baruch@tkos.co.il>");
MODULE_DESCRIPTION("Synopsys DesignWare PCI I2C bus adapter");
MODULE_LICENSE("GPL");