blob: 0aa951f0ab9242b5173a298e4064a45c0c4f8b08 [file] [log] [blame]
# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/input/iqs62x-keys.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Azoteq IQS620A/621/622/624/625 Keys and Switches
maintainers:
- Jeff LaBundy <jeff@labundy.com>
allOf:
- $ref: input.yaml#
description: |
The Azoteq IQS620A, IQS621, IQS622, IQS624 and IQS625 multi-function sensors
feature a variety of self-capacitive, mutual-inductive and Hall-effect sens-
ing capabilities that can facilitate a variety of contactless key and switch
applications.
These functions are collectively represented by a "keys" child node from the
parent MFD driver. See Documentation/devicetree/bindings/mfd/iqs62x.yaml for
further details and examples. Sensor hardware configuration (self-capacitive
vs. mutual-inductive, etc.) is selected based on the device's firmware.
properties:
compatible:
enum:
- azoteq,iqs620a-keys
- azoteq,iqs621-keys
- azoteq,iqs622-keys
- azoteq,iqs624-keys
- azoteq,iqs625-keys
linux,keycodes:
minItems: 1
maxItems: 16
description: |
Specifies the numeric keycodes associated with each available touch or
proximity event according to the following table. An 'x' indicates the
event is supported for a given device. Specify 0 for unused events.
-------------------------------------------------------------------------
| # | Event | IQS620A | IQS621 | IQS622 | IQS624 | IQS625 |
-------------------------------------------------------------------------
| 0 | CH0 Touch | x | x | x | x | x |
| | Antenna 1 Touch* | x | | | | |
-------------------------------------------------------------------------
| 1 | CH0 Proximity | x | x | x | x | x |
| | Antenna 1 Prox.* | x | | | | |
-------------------------------------------------------------------------
| 2 | CH1 Touch | x | x | x | x | x |
| | Ant. 1 Deep Touch* | x | | | | |
-------------------------------------------------------------------------
| 3 | CH1 Proximity | x | x | x | x | x |
-------------------------------------------------------------------------
| 4 | CH2 Touch | x | | | | |
-------------------------------------------------------------------------
| 5 | CH2 Proximity | x | | | | |
| | Antenna 2 Prox.* | x | | | | |
-------------------------------------------------------------------------
| 6 | Metal (+) Touch** | x | x | | | |
| | Ant. 2 Deep Touch* | x | | | | |
-------------------------------------------------------------------------
| 7 | Metal (+) Prox.** | x | x | | | |
| | Antenna 2 Touch* | x | | | | |
-------------------------------------------------------------------------
| 8 | Metal (-) Touch** | x | x | | | |
-------------------------------------------------------------------------
| 9 | Metal (-) Prox.** | x | x | | | |
-------------------------------------------------------------------------
| 10 | SAR Active*** | x | | x | | |
-------------------------------------------------------------------------
| 11 | SAR Quick Rel.*** | x | | x | | |
-------------------------------------------------------------------------
| 12 | SAR Movement*** | x | | x | | |
-------------------------------------------------------------------------
| 13 | SAR Filter Halt*** | x | | x | | |
-------------------------------------------------------------------------
| 14 | Wheel Up | | | | x | |
-------------------------------------------------------------------------
| 15 | Wheel Down | | | | x | |
-------------------------------------------------------------------------
* Two-channel SAR. Replaces CH0-2 plus metal touch and proximity events
if enabled via firmware.
** "+" and "-" refer to the polarity of a channel's delta (LTA - counts),
where "LTA" is defined as the channel's long-term average.
*** One-channel SAR. Replaces CH0-2 touch and proximity events if enabled
via firmware.
patternProperties:
"^hall-switch-(north|south)$":
type: object
$ref: input.yaml#
description:
Represents north/south-field Hall-effect sensor touch or proximity
events. Note that north/south-field orientation is reversed on the
IQS620AXzCSR device due to its flip-chip package.
properties:
linux,code: true
azoteq,use-prox:
$ref: /schemas/types.yaml#/definitions/flag
description:
If present, specifies that Hall-effect sensor reporting should
use the device's wide-range proximity threshold instead of its
close-range touch threshold (default).
required:
- linux,code
additionalProperties: false
if:
properties:
compatible:
contains:
enum:
- azoteq,iqs624-keys
- azoteq,iqs625-keys
then:
patternProperties:
"^hall-switch-(north|south)$": false
required:
- compatible
- linux,keycodes
additionalProperties: false
...