blob: 4f0b7c71313c3c380b0451ad0da5225536700947 [file] [log] [blame]
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/display/bridge/chipone,icn6211.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Chipone ICN6211 MIPI-DSI to RGB Converter bridge
maintainers:
- Jagan Teki <jagan@amarulasolutions.com>
description: |
ICN6211 is MIPI-DSI to RGB Converter bridge from chipone.
It has a flexible configuration of MIPI DSI signal input and
produce RGB565, RGB666, RGB888 output format.
properties:
compatible:
enum:
- chipone,icn6211
reg:
maxItems: 1
description: virtual channel number of a DSI peripheral
enable-gpios:
description: Bridge EN pin, chip is reset when EN is low.
vdd1-supply:
description: A 1.8V/2.5V/3.3V supply that power the MIPI RX.
vdd2-supply:
description: A 1.8V/2.5V/3.3V supply that power the PLL.
vdd3-supply:
description: A 1.8V/2.5V/3.3V supply that power the RGB output.
ports:
$ref: /schemas/graph.yaml#/properties/ports
properties:
port@0:
$ref: /schemas/graph.yaml#/$defs/port-base
unevaluatedProperties: false
description:
Video port for MIPI DSI input
properties:
endpoint:
$ref: /schemas/media/video-interfaces.yaml#
unevaluatedProperties: false
properties:
data-lanes:
description: array of physical DSI data lane indexes.
minItems: 1
items:
- const: 1
- const: 2
- const: 3
- const: 4
port@1:
$ref: /schemas/graph.yaml#/properties/port
description:
Video port for MIPI DPI output (panel or connector).
required:
- port@1
required:
- compatible
- reg
- enable-gpios
- ports
additionalProperties: false
examples:
- |
#include <dt-bindings/gpio/gpio.h>
dsi {
#address-cells = <1>;
#size-cells = <0>;
bridge@0 {
compatible = "chipone,icn6211";
reg = <0>;
enable-gpios = <&r_pio 0 5 GPIO_ACTIVE_HIGH>; /* LCD-RST: PL5 */
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
bridge_in_dsi: endpoint {
remote-endpoint = <&dsi_out_bridge>;
};
};
port@1 {
reg = <1>;
bridge_out_panel: endpoint {
remote-endpoint = <&panel_out_bridge>;
};
};
};
};
};