blob: 866531c08e4f9da1e892b1c7cd15e24552774b81 [file] [log] [blame]
# SPDX-License-Identifier: GPL-2.0
include ../../../build/Build.include
include ../../../scripts/Makefile.arch
include ../../../scripts/Makefile.include
CXX ?= $(CROSS_COMPILE)g++
CURDIR := $(abspath .)
TOOLSDIR := $(abspath ../../..)
LIBDIR := $(TOOLSDIR)/lib
BPFDIR := $(LIBDIR)/bpf
TOOLSINCDIR := $(TOOLSDIR)/include
BPFTOOLDIR := $(TOOLSDIR)/bpf/bpftool
APIDIR := $(TOOLSINCDIR)/uapi
GENDIR := $(abspath ../../../../include/generated)
GENHDR := $(GENDIR)/autoconf.h
ifneq ($(wildcard $(GENHDR)),)
GENFLAGS := -DHAVE_GENHDR
endif
BPF_GCC ?= $(shell command -v bpf-gcc;)
SAN_CFLAGS ?=
CFLAGS += -g -O0 -rdynamic -Wall $(GENFLAGS) $(SAN_CFLAGS) \
-I$(CURDIR) -I$(INCLUDE_DIR) -I$(GENDIR) -I$(LIBDIR) \
-I$(TOOLSINCDIR) -I$(APIDIR) -I$(OUTPUT) \
-Dbpf_prog_load=bpf_prog_test_load \
-Dbpf_load_program=bpf_test_load_program
LDLIBS += -lcap -lelf -lz -lrt -lpthread
# Silence some warnings when compiled with clang
ifneq ($(LLVM),)
CFLAGS += -Wno-unused-command-line-argument
endif
# Order correspond to 'make run_tests' order
TEST_GEN_PROGS = test_verifier test_tag test_maps test_lru_map test_lpm_map test_progs \
test_verifier_log test_dev_cgroup \
test_sock test_sockmap get_cgroup_id_user \
test_cgroup_storage \
test_tcpnotify_user test_sysctl \
test_progs-no_alu32
# Also test bpf-gcc, if present
ifneq ($(BPF_GCC),)
TEST_GEN_PROGS += test_progs-bpf_gcc
endif
TEST_GEN_FILES = test_lwt_ip_encap.o \
test_tc_edt.o
TEST_FILES = xsk_prereqs.sh \
$(wildcard progs/btf_dump_test_case_*.c)
# Order correspond to 'make run_tests' order
TEST_PROGS := test_kmod.sh \
test_xdp_redirect.sh \
test_xdp_redirect_multi.sh \
test_xdp_meta.sh \
test_xdp_veth.sh \
test_offload.py \
test_sock_addr.sh \
test_tunnel.sh \
test_lwt_seg6local.sh \
test_lirc_mode2.sh \
test_skb_cgroup_id.sh \
test_flow_dissector.sh \
test_xdp_vlan_mode_generic.sh \
test_xdp_vlan_mode_native.sh \
test_lwt_ip_encap.sh \
test_tcp_check_syncookie.sh \
test_tc_tunnel.sh \
test_tc_edt.sh \
test_xdping.sh \
test_bpftool_build.sh \
test_bpftool.sh \
test_bpftool_metadata.sh \
test_doc_build.sh \
test_xsk.sh
TEST_PROGS_EXTENDED := with_addr.sh \
with_tunnels.sh \
test_xdp_vlan.sh test_bpftool.py
# Compile but not part of 'make run_tests'
TEST_GEN_PROGS_EXTENDED = test_sock_addr test_skb_cgroup_id_user \
flow_dissector_load test_flow_dissector test_tcp_check_syncookie_user \
test_lirc_mode2_user xdping test_cpp runqslower bench bpf_testmod.ko \
xdpxceiver xdp_redirect_multi
TEST_CUSTOM_PROGS = $(OUTPUT)/urandom_read
# Emit succinct information message describing current building step
# $1 - generic step name (e.g., CC, LINK, etc);
# $2 - optional "flavor" specifier; if provided, will be emitted as [flavor];
# $3 - target (assumed to be file); only file name will be emitted;
# $4 - optional extra arg, emitted as-is, if provided.
ifeq ($(V),1)
Q =
msg =
else
Q = @
msg = @printf ' %-8s%s %s%s\n' "$(1)" "$(if $(2), [$(2)])" "$(notdir $(3))" "$(if $(4), $(4))";
MAKEFLAGS += --no-print-directory
submake_extras := feature_display=0
endif
# override lib.mk's default rules
OVERRIDE_TARGETS := 1
override define CLEAN
$(call msg,CLEAN)
$(Q)$(RM) -r $(TEST_GEN_PROGS) $(TEST_GEN_PROGS_EXTENDED) $(TEST_GEN_FILES) $(EXTRA_CLEAN)
$(Q)$(MAKE) -C bpf_testmod clean
$(Q)$(MAKE) docs-clean
endef
include ../lib.mk
SCRATCH_DIR := $(OUTPUT)/tools
BUILD_DIR := $(SCRATCH_DIR)/build
INCLUDE_DIR := $(SCRATCH_DIR)/include
BPFOBJ := $(BUILD_DIR)/libbpf/libbpf.a
ifneq ($(CROSS_COMPILE),)
HOST_BUILD_DIR := $(BUILD_DIR)/host
HOST_SCRATCH_DIR := $(OUTPUT)/host-tools
else
HOST_BUILD_DIR := $(BUILD_DIR)
HOST_SCRATCH_DIR := $(SCRATCH_DIR)
endif
HOST_BPFOBJ := $(HOST_BUILD_DIR)/libbpf/libbpf.a
RESOLVE_BTFIDS := $(HOST_BUILD_DIR)/resolve_btfids/resolve_btfids
VMLINUX_BTF_PATHS ?= $(if $(O),$(O)/vmlinux) \
$(if $(KBUILD_OUTPUT),$(KBUILD_OUTPUT)/vmlinux) \
../../../../vmlinux \
/sys/kernel/btf/vmlinux \
/boot/vmlinux-$(shell uname -r)
VMLINUX_BTF ?= $(abspath $(firstword $(wildcard $(VMLINUX_BTF_PATHS))))
ifeq ($(VMLINUX_BTF),)
$(error Cannot find a vmlinux for VMLINUX_BTF at any of "$(VMLINUX_BTF_PATHS)")
endif
# Define simple and short `make test_progs`, `make test_sysctl`, etc targets
# to build individual tests.
# NOTE: Semicolon at the end is critical to override lib.mk's default static
# rule for binaries.
$(notdir $(TEST_GEN_PROGS) \
$(TEST_PROGS) \
$(TEST_PROGS_EXTENDED) \
$(TEST_GEN_PROGS_EXTENDED) \
$(TEST_CUSTOM_PROGS)): %: $(OUTPUT)/% ;
# sort removes libbpf duplicates when not cross-building
MAKE_DIRS := $(sort $(BUILD_DIR)/libbpf $(HOST_BUILD_DIR)/libbpf \
$(HOST_BUILD_DIR)/bpftool $(HOST_BUILD_DIR)/resolve_btfids \
$(INCLUDE_DIR))
$(MAKE_DIRS):
$(call msg,MKDIR,,$@)
$(Q)mkdir -p $@
$(OUTPUT)/%.o: %.c
$(call msg,CC,,$@)
$(Q)$(CC) $(CFLAGS) -c $(filter %.c,$^) $(LDLIBS) -o $@
$(OUTPUT)/%:%.c
$(call msg,BINARY,,$@)
$(Q)$(LINK.c) $^ $(LDLIBS) -o $@
$(OUTPUT)/urandom_read: urandom_read.c
$(call msg,BINARY,,$@)
$(Q)$(CC) $(LDFLAGS) -o $@ $< $(LDLIBS) -Wl,--build-id=sha1
$(OUTPUT)/bpf_testmod.ko: $(VMLINUX_BTF) $(wildcard bpf_testmod/Makefile bpf_testmod/*.[ch])
$(call msg,MOD,,$@)
$(Q)$(RM) bpf_testmod/bpf_testmod.ko # force re-compilation
$(Q)$(MAKE) $(submake_extras) -C bpf_testmod
$(Q)cp bpf_testmod/bpf_testmod.ko $@
$(OUTPUT)/test_stub.o: test_stub.c $(BPFOBJ)
$(call msg,CC,,$@)
$(Q)$(CC) -c $(CFLAGS) -o $@ $<
DEFAULT_BPFTOOL := $(HOST_SCRATCH_DIR)/sbin/bpftool
$(OUTPUT)/runqslower: $(BPFOBJ) | $(DEFAULT_BPFTOOL)
$(Q)$(MAKE) $(submake_extras) -C $(TOOLSDIR)/bpf/runqslower \
OUTPUT=$(SCRATCH_DIR)/ VMLINUX_BTF=$(VMLINUX_BTF) \
BPFOBJ=$(BPFOBJ) BPF_INCLUDE=$(INCLUDE_DIR) && \
cp $(SCRATCH_DIR)/runqslower $@
TEST_GEN_PROGS_EXTENDED += $(DEFAULT_BPFTOOL)
$(TEST_GEN_PROGS) $(TEST_GEN_PROGS_EXTENDED): $(OUTPUT)/test_stub.o $(BPFOBJ)
$(OUTPUT)/test_dev_cgroup: cgroup_helpers.c
$(OUTPUT)/test_skb_cgroup_id_user: cgroup_helpers.c
$(OUTPUT)/test_sock: cgroup_helpers.c
$(OUTPUT)/test_sock_addr: cgroup_helpers.c
$(OUTPUT)/test_sockmap: cgroup_helpers.c
$(OUTPUT)/test_tcpnotify_user: cgroup_helpers.c trace_helpers.c
$(OUTPUT)/get_cgroup_id_user: cgroup_helpers.c
$(OUTPUT)/test_cgroup_storage: cgroup_helpers.c
$(OUTPUT)/test_sock_fields: cgroup_helpers.c
$(OUTPUT)/test_sysctl: cgroup_helpers.c
BPFTOOL ?= $(DEFAULT_BPFTOOL)
$(DEFAULT_BPFTOOL): $(wildcard $(BPFTOOLDIR)/*.[ch] $(BPFTOOLDIR)/Makefile) \
$(HOST_BPFOBJ) | $(HOST_BUILD_DIR)/bpftool
$(Q)$(MAKE) $(submake_extras) -C $(BPFTOOLDIR) \
CC=$(HOSTCC) LD=$(HOSTLD) \
EXTRA_CFLAGS='-g -O0' \
OUTPUT=$(HOST_BUILD_DIR)/bpftool/ \
prefix= DESTDIR=$(HOST_SCRATCH_DIR)/ install
all: docs
docs:
$(Q)RST2MAN_OPTS="--exit-status=1" $(MAKE) $(submake_extras) \
-f Makefile.docs \
prefix= OUTPUT=$(OUTPUT)/ DESTDIR=$(OUTPUT)/ $@
docs-clean:
$(Q)$(MAKE) $(submake_extras) \
-f Makefile.docs \
prefix= OUTPUT=$(OUTPUT)/ DESTDIR=$(OUTPUT)/ $@
$(BPFOBJ): $(wildcard $(BPFDIR)/*.[ch] $(BPFDIR)/Makefile) \
../../../include/uapi/linux/bpf.h \
| $(INCLUDE_DIR) $(BUILD_DIR)/libbpf
$(Q)$(MAKE) $(submake_extras) -C $(BPFDIR) OUTPUT=$(BUILD_DIR)/libbpf/ \
EXTRA_CFLAGS='-g -O0' \
DESTDIR=$(SCRATCH_DIR) prefix= all install_headers
ifneq ($(BPFOBJ),$(HOST_BPFOBJ))
$(HOST_BPFOBJ): $(wildcard $(BPFDIR)/*.[ch] $(BPFDIR)/Makefile) \
../../../include/uapi/linux/bpf.h \
| $(INCLUDE_DIR) $(HOST_BUILD_DIR)/libbpf
$(Q)$(MAKE) $(submake_extras) -C $(BPFDIR) \
EXTRA_CFLAGS='-g -O0' \
OUTPUT=$(HOST_BUILD_DIR)/libbpf/ CC=$(HOSTCC) LD=$(HOSTLD) \
DESTDIR=$(HOST_SCRATCH_DIR)/ prefix= all install_headers
endif
$(INCLUDE_DIR)/vmlinux.h: $(VMLINUX_BTF) $(BPFTOOL) | $(INCLUDE_DIR)
ifeq ($(VMLINUX_H),)
$(call msg,GEN,,$@)
$(Q)$(BPFTOOL) btf dump file $(VMLINUX_BTF) format c > $@
else
$(call msg,CP,,$@)
$(Q)cp "$(VMLINUX_H)" $@
endif
$(RESOLVE_BTFIDS): $(HOST_BPFOBJ) | $(HOST_BUILD_DIR)/resolve_btfids \
$(TOOLSDIR)/bpf/resolve_btfids/main.c \
$(TOOLSDIR)/lib/rbtree.c \
$(TOOLSDIR)/lib/zalloc.c \
$(TOOLSDIR)/lib/string.c \
$(TOOLSDIR)/lib/ctype.c \
$(TOOLSDIR)/lib/str_error_r.c
$(Q)$(MAKE) $(submake_extras) -C $(TOOLSDIR)/bpf/resolve_btfids \
CC=$(HOSTCC) LD=$(HOSTLD) AR=$(HOSTAR) \
OUTPUT=$(HOST_BUILD_DIR)/resolve_btfids/ BPFOBJ=$(HOST_BPFOBJ)
# Get Clang's default includes on this system, as opposed to those seen by
# '-target bpf'. This fixes "missing" files on some architectures/distros,
# such as asm/byteorder.h, asm/socket.h, asm/sockios.h, sys/cdefs.h etc.
#
# Use '-idirafter': Don't interfere with include mechanics except where the
# build would have failed anyways.
define get_sys_includes
$(shell $(1) -v -E - </dev/null 2>&1 \
| sed -n '/<...> search starts here:/,/End of search list./{ s| \(/.*\)|-idirafter \1|p }') \
$(shell $(1) -dM -E - </dev/null | grep '#define __riscv_xlen ' | sed 's/#define /-D/' | sed 's/ /=/')
endef
# Determine target endianness.
IS_LITTLE_ENDIAN = $(shell $(CC) -dM -E - </dev/null | \
grep 'define __BYTE_ORDER__ __ORDER_LITTLE_ENDIAN__')
MENDIAN=$(if $(IS_LITTLE_ENDIAN),-mlittle-endian,-mbig-endian)
CLANG_SYS_INCLUDES = $(call get_sys_includes,$(CLANG))
BPF_CFLAGS = -g -D__TARGET_ARCH_$(SRCARCH) $(MENDIAN) \
-I$(INCLUDE_DIR) -I$(CURDIR) -I$(APIDIR) \
-I$(abspath $(OUTPUT)/../usr/include)
CLANG_CFLAGS = $(CLANG_SYS_INCLUDES) \
-Wno-compare-distinct-pointer-types
$(OUTPUT)/test_l4lb_noinline.o: BPF_CFLAGS += -fno-inline
$(OUTPUT)/test_xdp_noinline.o: BPF_CFLAGS += -fno-inline
$(OUTPUT)/flow_dissector_load.o: flow_dissector_load.h
# Build BPF object using Clang
# $1 - input .c file
# $2 - output .o file
# $3 - CFLAGS
define CLANG_BPF_BUILD_RULE
$(call msg,CLNG-BPF,$(TRUNNER_BINARY),$2)
$(Q)$(CLANG) $3 -O2 -target bpf -c $1 -o $2 -mcpu=v3
endef
# Similar to CLANG_BPF_BUILD_RULE, but with disabled alu32
define CLANG_NOALU32_BPF_BUILD_RULE
$(call msg,CLNG-BPF,$(TRUNNER_BINARY),$2)
$(Q)$(CLANG) $3 -O2 -target bpf -c $1 -o $2 -mcpu=v2
endef
# Build BPF object using GCC
define GCC_BPF_BUILD_RULE
$(call msg,GCC-BPF,$(TRUNNER_BINARY),$2)
$(Q)$(BPF_GCC) $3 -O2 -c $1 -o $2
endef
SKEL_BLACKLIST := btf__% test_pinning_invalid.c test_sk_assign.c
LINKED_SKELS := test_static_linked.skel.h linked_funcs.skel.h \
linked_vars.skel.h linked_maps.skel.h
LSKELS := kfunc_call_test.c fentry_test.c fexit_test.c fexit_sleep.c \
test_ksyms_module.c test_ringbuf.c atomics.c trace_printk.c
SKEL_BLACKLIST += $$(LSKELS)
test_static_linked.skel.h-deps := test_static_linked1.o test_static_linked2.o
linked_funcs.skel.h-deps := linked_funcs1.o linked_funcs2.o
linked_vars.skel.h-deps := linked_vars1.o linked_vars2.o
linked_maps.skel.h-deps := linked_maps1.o linked_maps2.o
LINKED_BPF_SRCS := $(patsubst %.o,%.c,$(foreach skel,$(LINKED_SKELS),$($(skel)-deps)))
# Set up extra TRUNNER_XXX "temporary" variables in the environment (relies on
# $eval()) and pass control to DEFINE_TEST_RUNNER_RULES.
# Parameters:
# $1 - test runner base binary name (e.g., test_progs)
# $2 - test runner extra "flavor" (e.g., no_alu32, gcc-bpf, etc)
define DEFINE_TEST_RUNNER
TRUNNER_OUTPUT := $(OUTPUT)$(if $2,/)$2
TRUNNER_BINARY := $1$(if $2,-)$2
TRUNNER_TEST_OBJS := $$(patsubst %.c,$$(TRUNNER_OUTPUT)/%.test.o, \
$$(notdir $$(wildcard $(TRUNNER_TESTS_DIR)/*.c)))
TRUNNER_EXTRA_OBJS := $$(patsubst %.c,$$(TRUNNER_OUTPUT)/%.o, \
$$(filter %.c,$(TRUNNER_EXTRA_SOURCES)))
TRUNNER_EXTRA_HDRS := $$(filter %.h,$(TRUNNER_EXTRA_SOURCES))
TRUNNER_TESTS_HDR := $(TRUNNER_TESTS_DIR)/tests.h
TRUNNER_BPF_SRCS := $$(notdir $$(wildcard $(TRUNNER_BPF_PROGS_DIR)/*.c))
TRUNNER_BPF_OBJS := $$(patsubst %.c,$$(TRUNNER_OUTPUT)/%.o, $$(TRUNNER_BPF_SRCS))
TRUNNER_BPF_SKELS := $$(patsubst %.c,$$(TRUNNER_OUTPUT)/%.skel.h, \
$$(filter-out $(SKEL_BLACKLIST) $(LINKED_BPF_SRCS),\
$$(TRUNNER_BPF_SRCS)))
TRUNNER_BPF_LSKELS := $$(patsubst %.c,$$(TRUNNER_OUTPUT)/%.lskel.h, $$(LSKELS))
TRUNNER_BPF_SKELS_LINKED := $$(addprefix $$(TRUNNER_OUTPUT)/,$(LINKED_SKELS))
TEST_GEN_FILES += $$(TRUNNER_BPF_OBJS)
# Evaluate rules now with extra TRUNNER_XXX variables above already defined
$$(eval $$(call DEFINE_TEST_RUNNER_RULES,$1,$2))
endef
# Using TRUNNER_XXX variables, provided by callers of DEFINE_TEST_RUNNER and
# set up by DEFINE_TEST_RUNNER itself, create test runner build rules with:
# $1 - test runner base binary name (e.g., test_progs)
# $2 - test runner extra "flavor" (e.g., no_alu32, gcc-bpf, etc)
define DEFINE_TEST_RUNNER_RULES
ifeq ($($(TRUNNER_OUTPUT)-dir),)
$(TRUNNER_OUTPUT)-dir := y
$(TRUNNER_OUTPUT):
$$(call msg,MKDIR,,$$@)
$(Q)mkdir -p $$@
endif
# ensure we set up BPF objects generation rule just once for a given
# input/output directory combination
ifeq ($($(TRUNNER_BPF_PROGS_DIR)$(if $2,-)$2-bpfobjs),)
$(TRUNNER_BPF_PROGS_DIR)$(if $2,-)$2-bpfobjs := y
$(TRUNNER_BPF_OBJS): $(TRUNNER_OUTPUT)/%.o: \
$(TRUNNER_BPF_PROGS_DIR)/%.c \
$(TRUNNER_BPF_PROGS_DIR)/*.h \
$$(INCLUDE_DIR)/vmlinux.h \
$(wildcard $(BPFDIR)/bpf_*.h) | $(TRUNNER_OUTPUT)
$$(call $(TRUNNER_BPF_BUILD_RULE),$$<,$$@, \
$(TRUNNER_BPF_CFLAGS))
$(TRUNNER_BPF_SKELS): %.skel.h: %.o $(BPFTOOL) | $(TRUNNER_OUTPUT)
$$(call msg,GEN-SKEL,$(TRUNNER_BINARY),$$@)
$(Q)$$(BPFTOOL) gen object $$(<:.o=.linked1.o) $$<
$(Q)$$(BPFTOOL) gen object $$(<:.o=.linked2.o) $$(<:.o=.linked1.o)
$(Q)$$(BPFTOOL) gen object $$(<:.o=.linked3.o) $$(<:.o=.linked2.o)
$(Q)diff $$(<:.o=.linked2.o) $$(<:.o=.linked3.o)
$(Q)$$(BPFTOOL) gen skeleton $$(<:.o=.linked3.o) name $$(notdir $$(<:.o=)) > $$@
$(TRUNNER_BPF_LSKELS): %.lskel.h: %.o $(BPFTOOL) | $(TRUNNER_OUTPUT)
$$(call msg,GEN-SKEL,$(TRUNNER_BINARY),$$@)
$(Q)$$(BPFTOOL) gen object $$(<:.o=.linked1.o) $$<
$(Q)$$(BPFTOOL) gen object $$(<:.o=.linked2.o) $$(<:.o=.linked1.o)
$(Q)$$(BPFTOOL) gen object $$(<:.o=.linked3.o) $$(<:.o=.linked2.o)
$(Q)diff $$(<:.o=.linked2.o) $$(<:.o=.linked3.o)
$(Q)$$(BPFTOOL) gen skeleton -L $$(<:.o=.linked3.o) name $$(notdir $$(<:.o=)) > $$@
$(TRUNNER_BPF_SKELS_LINKED): $(TRUNNER_BPF_OBJS) $(BPFTOOL) | $(TRUNNER_OUTPUT)
$$(call msg,LINK-BPF,$(TRUNNER_BINARY),$$(@:.skel.h=.o))
$(Q)$$(BPFTOOL) gen object $$(@:.skel.h=.linked1.o) $$(addprefix $(TRUNNER_OUTPUT)/,$$($$(@F)-deps))
$(Q)$$(BPFTOOL) gen object $$(@:.skel.h=.linked2.o) $$(@:.skel.h=.linked1.o)
$(Q)$$(BPFTOOL) gen object $$(@:.skel.h=.linked3.o) $$(@:.skel.h=.linked2.o)
$(Q)diff $$(@:.skel.h=.linked2.o) $$(@:.skel.h=.linked3.o)
$$(call msg,GEN-SKEL,$(TRUNNER_BINARY),$$@)
$(Q)$$(BPFTOOL) gen skeleton $$(@:.skel.h=.linked3.o) name $$(notdir $$(@:.skel.h=)) > $$@
endif
# ensure we set up tests.h header generation rule just once
ifeq ($($(TRUNNER_TESTS_DIR)-tests-hdr),)
$(TRUNNER_TESTS_DIR)-tests-hdr := y
$(TRUNNER_TESTS_HDR): $(TRUNNER_TESTS_DIR)/*.c
$$(call msg,TEST-HDR,$(TRUNNER_BINARY),$$@)
$$(shell ( cd $(TRUNNER_TESTS_DIR); \
echo '/* Generated header, do not edit */'; \
ls *.c 2> /dev/null | \
sed -e 's@\([^\.]*\)\.c@DEFINE_TEST(\1)@'; \
) > $$@)
endif
# compile individual test files
# Note: we cd into output directory to ensure embedded BPF object is found
$(TRUNNER_TEST_OBJS): $(TRUNNER_OUTPUT)/%.test.o: \
$(TRUNNER_TESTS_DIR)/%.c \
$(TRUNNER_EXTRA_HDRS) \
$(TRUNNER_BPF_OBJS) \
$(TRUNNER_BPF_SKELS) \
$(TRUNNER_BPF_LSKELS) \
$(TRUNNER_BPF_SKELS_LINKED) \
$$(BPFOBJ) | $(TRUNNER_OUTPUT)
$$(call msg,TEST-OBJ,$(TRUNNER_BINARY),$$@)
$(Q)cd $$(@D) && $$(CC) -I. $$(CFLAGS) -c $(CURDIR)/$$< $$(LDLIBS) -o $$(@F)
$(TRUNNER_EXTRA_OBJS): $(TRUNNER_OUTPUT)/%.o: \
%.c \
$(TRUNNER_EXTRA_HDRS) \
$(TRUNNER_TESTS_HDR) \
$$(BPFOBJ) | $(TRUNNER_OUTPUT)
$$(call msg,EXT-OBJ,$(TRUNNER_BINARY),$$@)
$(Q)$$(CC) $$(CFLAGS) -c $$< $$(LDLIBS) -o $$@
# non-flavored in-srctree builds receive special treatment, in particular, we
# do not need to copy extra resources (see e.g. test_btf_dump_case())
$(TRUNNER_BINARY)-extras: $(TRUNNER_EXTRA_FILES) | $(TRUNNER_OUTPUT)
ifneq ($2:$(OUTPUT),:$(shell pwd))
$$(call msg,EXT-COPY,$(TRUNNER_BINARY),$(TRUNNER_EXTRA_FILES))
$(Q)rsync -aq $$^ $(TRUNNER_OUTPUT)/
endif
$(OUTPUT)/$(TRUNNER_BINARY): $(TRUNNER_TEST_OBJS) \
$(TRUNNER_EXTRA_OBJS) $$(BPFOBJ) \
$(RESOLVE_BTFIDS) \
| $(TRUNNER_BINARY)-extras
$$(call msg,BINARY,,$$@)
$(Q)$$(CC) $$(CFLAGS) $$(filter %.a %.o,$$^) $$(LDLIBS) -o $$@
$(Q)$(RESOLVE_BTFIDS) --no-fail --btf $(TRUNNER_OUTPUT)/btf_data.o $$@
endef
# Define test_progs test runner.
TRUNNER_TESTS_DIR := prog_tests
TRUNNER_BPF_PROGS_DIR := progs
TRUNNER_EXTRA_SOURCES := test_progs.c cgroup_helpers.c trace_helpers.c \
network_helpers.c testing_helpers.c \
btf_helpers.c flow_dissector_load.h
TRUNNER_EXTRA_FILES := $(OUTPUT)/urandom_read $(OUTPUT)/bpf_testmod.ko \
ima_setup.sh \
$(wildcard progs/btf_dump_test_case_*.c)
TRUNNER_BPF_BUILD_RULE := CLANG_BPF_BUILD_RULE
TRUNNER_BPF_CFLAGS := $(BPF_CFLAGS) $(CLANG_CFLAGS)
TRUNNER_BPF_CFLAGS += -DENABLE_ATOMICS_TESTS
$(eval $(call DEFINE_TEST_RUNNER,test_progs))
# Define test_progs-no_alu32 test runner.
TRUNNER_BPF_BUILD_RULE := CLANG_NOALU32_BPF_BUILD_RULE
TRUNNER_BPF_CFLAGS := $(BPF_CFLAGS) $(CLANG_CFLAGS)
$(eval $(call DEFINE_TEST_RUNNER,test_progs,no_alu32))
# Define test_progs BPF-GCC-flavored test runner.
ifneq ($(BPF_GCC),)
TRUNNER_BPF_BUILD_RULE := GCC_BPF_BUILD_RULE
TRUNNER_BPF_CFLAGS := $(BPF_CFLAGS) $(call get_sys_includes,gcc)
$(eval $(call DEFINE_TEST_RUNNER,test_progs,bpf_gcc))
endif
# Define test_maps test runner.
TRUNNER_TESTS_DIR := map_tests
TRUNNER_BPF_PROGS_DIR := progs
TRUNNER_EXTRA_SOURCES := test_maps.c
TRUNNER_EXTRA_FILES :=
TRUNNER_BPF_BUILD_RULE := $$(error no BPF objects should be built)
TRUNNER_BPF_CFLAGS :=
$(eval $(call DEFINE_TEST_RUNNER,test_maps))
# Define test_verifier test runner.
# It is much simpler than test_maps/test_progs and sufficiently different from
# them (e.g., test.h is using completely pattern), that it's worth just
# explicitly defining all the rules explicitly.
verifier/tests.h: verifier/*.c
$(shell ( cd verifier/; \
echo '/* Generated header, do not edit */'; \
echo '#ifdef FILL_ARRAY'; \
ls *.c 2> /dev/null | sed -e 's@\(.*\)@#include \"\1\"@'; \
echo '#endif' \
) > verifier/tests.h)
$(OUTPUT)/test_verifier: test_verifier.c verifier/tests.h $(BPFOBJ) | $(OUTPUT)
$(call msg,BINARY,,$@)
$(Q)$(CC) $(CFLAGS) $(filter %.a %.o %.c,$^) $(LDLIBS) -o $@
# Make sure we are able to include and link libbpf against c++.
$(OUTPUT)/test_cpp: test_cpp.cpp $(OUTPUT)/test_core_extern.skel.h $(BPFOBJ)
$(call msg,CXX,,$@)
$(Q)$(CXX) $(CFLAGS) $(filter %.a %.o %.cpp,$^) $(LDLIBS) -o $@
# Benchmark runner
$(OUTPUT)/bench_%.o: benchs/bench_%.c bench.h
$(call msg,CC,,$@)
$(Q)$(CC) $(CFLAGS) -c $(filter %.c,$^) $(LDLIBS) -o $@
$(OUTPUT)/bench_rename.o: $(OUTPUT)/test_overhead.skel.h
$(OUTPUT)/bench_trigger.o: $(OUTPUT)/trigger_bench.skel.h
$(OUTPUT)/bench_ringbufs.o: $(OUTPUT)/ringbuf_bench.skel.h \
$(OUTPUT)/perfbuf_bench.skel.h
$(OUTPUT)/bench.o: bench.h testing_helpers.h
$(OUTPUT)/bench: LDLIBS += -lm
$(OUTPUT)/bench: $(OUTPUT)/bench.o $(OUTPUT)/testing_helpers.o \
$(OUTPUT)/bench_count.o \
$(OUTPUT)/bench_rename.o \
$(OUTPUT)/bench_trigger.o \
$(OUTPUT)/bench_ringbufs.o
$(call msg,BINARY,,$@)
$(Q)$(CC) $(LDFLAGS) -o $@ $(filter %.a %.o,$^) $(LDLIBS)
EXTRA_CLEAN := $(TEST_CUSTOM_PROGS) $(SCRATCH_DIR) $(HOST_SCRATCH_DIR) \
prog_tests/tests.h map_tests/tests.h verifier/tests.h \
feature \
$(addprefix $(OUTPUT)/,*.o *.skel.h *.lskel.h no_alu32 bpf_gcc bpf_testmod.ko)
.PHONY: docs docs-clean