tools/bpf/bpftool/Documentation/bpftool-prog.rst - linux/kernel/git/torvalds/linux - Git at Google

 .. SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)

 ================
 bpftool-prog
 ================
 -------------------------------------------------------------------------------
 tool for inspection and simple manipulation of eBPF progs
 -------------------------------------------------------------------------------

 :Manual section: 8

 .. include:: substitutions.rst

 SYNOPSIS
 ========

 	**bpftool** [*OPTIONS*] **prog** *COMMAND*

 	*OPTIONS* := { |COMMON_OPTIONS| |
 	{ **-f** | **--bpffs** } | { **-m** | **--mapcompat** } | { **-n** | **--nomount** } |
 	{ **-L** | **--use-loader** } }

 	*COMMANDS* :=
 	{ **show** | **list** | **dump xlated** | **dump jited** | **pin** | **load** |
 	**loadall** | **help** }

 PROG COMMANDS
 =============

 |	**bpftool** **prog** { **show** | **list** } [*PROG*]
 |	**bpftool** **prog dump xlated** *PROG* [{**file** *FILE* | **opcodes** | **visual** | **linum**}]
 |	**bpftool** **prog dump jited**  *PROG* [{**file** *FILE* | **opcodes** | **linum**}]
 |	**bpftool** **prog pin** *PROG* *FILE*
 |	**bpftool** **prog** { **load** | **loadall** } *OBJ* *PATH* [**type** *TYPE*] [**map** {**idx** *IDX* | **name** *NAME*} *MAP*] [**dev** *NAME*] [**pinmaps** *MAP_DIR*]
 |	**bpftool** **prog attach** *PROG* *ATTACH_TYPE* [*MAP*]
 |	**bpftool** **prog detach** *PROG* *ATTACH_TYPE* [*MAP*]
 |	**bpftool** **prog tracelog**
 |	**bpftool** **prog run** *PROG* **data_in** *FILE* [**data_out** *FILE* [**data_size_out** *L*]] [**ctx_in** *FILE* [**ctx_out** *FILE* [**ctx_size_out** *M*]]] [**repeat** *N*]
 |	**bpftool** **prog profile** *PROG* [**duration** *DURATION*] *METRICs*
 |	**bpftool** **prog help**
 |
 |	*MAP* := { **id** *MAP_ID* | **pinned** *FILE* }
 |	*PROG* := { **id** *PROG_ID* | **pinned** *FILE* | **tag** *PROG_TAG* | **name** *PROG_NAME* }
 |	*TYPE* := {
 |		**socket** | **kprobe** | **kretprobe** | **classifier** | **action** |
 |		**tracepoint** | **raw_tracepoint** | **xdp** | **perf_event** | **cgroup/skb** |
 |		**cgroup/sock** | **cgroup/dev** | **lwt_in** | **lwt_out** | **lwt_xmit** |
 |		**lwt_seg6local** | **sockops** | **sk_skb** | **sk_msg** | **lirc_mode2** |
 |		**cgroup/bind4** | **cgroup/bind6** | **cgroup/post_bind4** | **cgroup/post_bind6** |
 |		**cgroup/connect4** | **cgroup/connect6** | **cgroup/getpeername4** | **cgroup/getpeername6** |
 |               **cgroup/getsockname4** | **cgroup/getsockname6** | **cgroup/sendmsg4** | **cgroup/sendmsg6** |
 |		**cgroup/recvmsg4** | **cgroup/recvmsg6** | **cgroup/sysctl** |
 |		**cgroup/getsockopt** | **cgroup/setsockopt** | **cgroup/sock_release** |
 |		**struct_ops** | **fentry** | **fexit** | **freplace** | **sk_lookup**
 |	}
 |	*ATTACH_TYPE* := {
 |		**sk_msg_verdict** | **sk_skb_verdict** | **sk_skb_stream_verdict** |
 |		**sk_skb_stream_parser** | **flow_dissector**
 |	}
 |	*METRICs* := {
 |		**cycles** | **instructions** | **l1d_loads** | **llc_misses** |
 |		**itlb_misses** | **dtlb_misses**
 |	}


 DESCRIPTION
 ===========
 	**bpftool prog { show | list }** [*PROG*]
 		  Show information about loaded programs.  If *PROG* is
 		  specified show information only about given programs,
 		  otherwise list all programs currently loaded on the system.
 		  In case of **tag** or **name**, *PROG* may match several
 		  programs which will all be shown.

 		  Output will start with program ID followed by program type and
 		  zero or more named attributes (depending on kernel version).

 		  Since Linux 5.1 the kernel can collect statistics on BPF
 		  programs (such as the total time spent running the program,
 		  and the number of times it was run). If available, bpftool
 		  shows such statistics. However, the kernel does not collect
 		  them by defaults, as it slightly impacts performance on each
 		  program run. Activation or deactivation of the feature is
 		  performed via the **kernel.bpf_stats_enabled** sysctl knob.

 		  Since Linux 5.8 bpftool is able to discover information about
 		  processes that hold open file descriptors (FDs) against BPF
 		  programs. On such kernels bpftool will automatically emit this
 		  information as well.

 	**bpftool prog dump xlated** *PROG* [{ **file** *FILE* | **opcodes** | **visual** | **linum** }]
 		  Dump eBPF instructions of the programs from the kernel. By
 		  default, eBPF will be disassembled and printed to standard
 		  output in human-readable format. In this case, **opcodes**
 		  controls if raw opcodes should be printed as well.

 		  In case of **tag** or **name**, *PROG* may match several
 		  programs which will all be dumped.  However, if **file** or
 		  **visual** is specified, *PROG* must match a single program.

 		  If **file** is specified, the binary image will instead be
 		  written to *FILE*.

 		  If **visual** is specified, control flow graph (CFG) will be
 		  built instead, and eBPF instructions will be presented with
 		  CFG in DOT format, on standard output.

 		  If the programs have line_info available, the source line will
 		  be displayed by default.  If **linum** is specified,
 		  the filename, line number and line column will also be
 		  displayed on top of the source line.

 	**bpftool prog dump jited**  *PROG* [{ **file** *FILE* | **opcodes** | **linum** }]
 		  Dump jited image (host machine code) of the program.

 		  If *FILE* is specified image will be written to a file,
 		  otherwise it will be disassembled and printed to stdout.
 		  *PROG* must match a single program when **file** is specified.

 		  **opcodes** controls if raw opcodes will be printed.

 		  If the prog has line_info available, the source line will
 		  be displayed by default.  If **linum** is specified,
 		  the filename, line number and line column will also be
 		  displayed on top of the source line.

 	**bpftool prog pin** *PROG* *FILE*
 		  Pin program *PROG* as *FILE*.

 		  Note: *FILE* must be located in *bpffs* mount. It must not
 		  contain a dot character ('.'), which is reserved for future
 		  extensions of *bpffs*.

 	**bpftool prog { load | loadall }** *OBJ* *PATH* [**type** *TYPE*] [**map** {**idx** *IDX* | **name** *NAME*} *MAP*] [**dev** *NAME*] [**pinmaps** *MAP_DIR*]
 		  Load bpf program(s) from binary *OBJ* and pin as *PATH*.
 		  **bpftool prog load** pins only the first program from the
 		  *OBJ* as *PATH*. **bpftool prog loadall** pins all programs
 		  from the *OBJ* under *PATH* directory.
 		  **type** is optional, if not specified program type will be
 		  inferred from section names.
 		  By default bpftool will create new maps as declared in the ELF
 		  object being loaded.  **map** parameter allows for the reuse
 		  of existing maps.  It can be specified multiple times, each
 		  time for a different map.  *IDX* refers to index of the map
 		  to be replaced in the ELF file counting from 0, while *NAME*
 		  allows to replace a map by name.  *MAP* specifies the map to
 		  use, referring to it by **id** or through a **pinned** file.
 		  If **dev** *NAME* is specified program will be loaded onto
 		  given networking device (offload).
 		  Optional **pinmaps** argument can be provided to pin all
 		  maps under *MAP_DIR* directory.

 		  Note: *PATH* must be located in *bpffs* mount. It must not
 		  contain a dot character ('.'), which is reserved for future
 		  extensions of *bpffs*.

 	**bpftool prog attach** *PROG* *ATTACH_TYPE* [*MAP*]
 		  Attach bpf program *PROG* (with type specified by
 		  *ATTACH_TYPE*). Most *ATTACH_TYPEs* require a *MAP*
 		  parameter, with the exception of *flow_dissector* which is
 		  attached to current networking name space.

 	**bpftool prog detach** *PROG* *ATTACH_TYPE* [*MAP*]
 		  Detach bpf program *PROG* (with type specified by
 		  *ATTACH_TYPE*). Most *ATTACH_TYPEs* require a *MAP*
 		  parameter, with the exception of *flow_dissector* which is
 		  detached from the current networking name space.

 	**bpftool prog tracelog**
 		  Dump the trace pipe of the system to the console (stdout).
 		  Hit <Ctrl+C> to stop printing. BPF programs can write to this
 		  trace pipe at runtime with the **bpf_trace_printk**\ () helper.
 		  This should be used only for debugging purposes. For
 		  streaming data from BPF programs to user space, one can use
 		  perf events (see also **bpftool-map**\ (8)).

 	**bpftool prog run** *PROG* **data_in** *FILE* [**data_out** *FILE* [**data_size_out** *L*]] [**ctx_in** *FILE* [**ctx_out** *FILE* [**ctx_size_out** *M*]]] [**repeat** *N*]
 		  Run BPF program *PROG* in the kernel testing infrastructure
 		  for BPF, meaning that the program works on the data and
 		  context provided by the user, and not on actual packets or
 		  monitored functions etc. Return value and duration for the
 		  test run are printed out to the console.

 		  Input data is read from the *FILE* passed with **data_in**.
 		  If this *FILE* is "**-**", input data is read from standard
 		  input. Input context, if any, is read from *FILE* passed with
 		  **ctx_in**. Again, "**-**" can be used to read from standard
 		  input, but only if standard input is not already in use for
 		  input data. If a *FILE* is passed with **data_out**, output
 		  data is written to that file. Similarly, output context is
 		  written to the *FILE* passed with **ctx_out**. For both
 		  output flows, "**-**" can be used to print to the standard
 		  output (as plain text, or JSON if relevant option was
 		  passed). If output keywords are omitted, output data and
 		  context are discarded. Keywords **data_size_out** and
 		  **ctx_size_out** are used to pass the size (in bytes) for the
 		  output buffers to the kernel, although the default of 32 kB
 		  should be more than enough for most cases.

 		  Keyword **repeat** is used to indicate the number of
 		  consecutive runs to perform. Note that output data and
 		  context printed to files correspond to the last of those
 		  runs. The duration printed out at the end of the runs is an
 		  average over all runs performed by the command.

 		  Not all program types support test run. Among those which do,
 		  not all of them can take the **ctx_in**/**ctx_out**
 		  arguments. bpftool does not perform checks on program types.

 	**bpftool prog profile** *PROG* [**duration** *DURATION*] *METRICs*
 		  Profile *METRICs* for bpf program *PROG* for *DURATION*
 		  seconds or until user hits <Ctrl+C>. *DURATION* is optional.
 		  If *DURATION* is not specified, the profiling will run up to
 		  **UINT_MAX** seconds.

 	**bpftool prog help**
 		  Print short help message.

 OPTIONS
 =======
 	.. include:: common_options.rst

 	-f, --bpffs
 		  When showing BPF programs, show file names of pinned
 		  programs.

 	-m, --mapcompat
 		  Allow loading maps with unknown map definitions.

 	-n, --nomount
 		  Do not automatically attempt to mount any virtual file system
 		  (such as tracefs or BPF virtual file system) when necessary.

 	-L, --use-loader
 		  Load program as a "loader" program. This is useful to debug
 		  the generation of such programs. When this option is in
 		  use, bpftool attempts to load the programs from the object
 		  file into the kernel, but does not pin them (therefore, the
 		  *PATH* must not be provided).

 		  When combined with the **-d**\ \|\ **--debug** option,
 		  additional debug messages are generated, and the execution
 		  of the loader program will use the **bpf_trace_printk**\ ()
 		  helper to log each step of loading BTF, creating the maps,
 		  and loading the programs (see **bpftool prog tracelog** as
 		  a way to dump those messages).

 EXAMPLES
 ========
 **# bpftool prog show**

 ::

     10: xdp  name some_prog  tag 005a3d2123620c8b  gpl run_time_ns 81632 run_cnt 10
             loaded_at 2017-09-29T20:11:00+0000  uid 0
             xlated 528B  jited 370B  memlock 4096B  map_ids 10
             pids systemd(1)

 **# bpftool --json --pretty prog show**

 ::

     [{
             "id": 10,
             "type": "xdp",
             "tag": "005a3d2123620c8b",
             "gpl_compatible": true,
             "run_time_ns": 81632,
             "run_cnt": 10,
             "loaded_at": 1506715860,
             "uid": 0,
             "bytes_xlated": 528,
             "jited": true,
             "bytes_jited": 370,
             "bytes_memlock": 4096,
             "map_ids": [10
             ],
             "pids": [{
                     "pid": 1,
                     "comm": "systemd"
                 }
             ]
         }
     ]

 |
 | **# bpftool prog dump xlated id 10 file /tmp/t**
 | **$ ls -l /tmp/t**

 ::

     -rw------- 1 root root 560 Jul 22 01:42 /tmp/t

 **# bpftool prog dump jited tag 005a3d2123620c8b**

 ::

     0:   push   %rbp
     1:   mov    %rsp,%rbp
     2:   sub    $0x228,%rsp
     3:   sub    $0x28,%rbp
     4:   mov    %rbx,0x0(%rbp)

 |
 | **# mount -t bpf none /sys/fs/bpf/**
 | **# bpftool prog pin id 10 /sys/fs/bpf/prog**
 | **# bpftool prog load ./my_prog.o /sys/fs/bpf/prog2**
 | **# ls -l /sys/fs/bpf/**

 ::

     -rw------- 1 root root 0 Jul 22 01:43 prog
     -rw------- 1 root root 0 Jul 22 01:44 prog2

 **# bpftool prog dump jited pinned /sys/fs/bpf/prog opcodes**

 ::

    0:   push   %rbp
         55
    1:   mov    %rsp,%rbp
         48 89 e5
    4:   sub    $0x228,%rsp
         48 81 ec 28 02 00 00
    b:   sub    $0x28,%rbp
         48 83 ed 28
    f:   mov    %rbx,0x0(%rbp)
         48 89 5d 00

 |
 | **# bpftool prog load xdp1_kern.o /sys/fs/bpf/xdp1 type xdp map name rxcnt id 7**
 | **# bpftool prog show pinned /sys/fs/bpf/xdp1**

 ::

     9: xdp  name xdp_prog1  tag 539ec6ce11b52f98  gpl
             loaded_at 2018-06-25T16:17:31-0700  uid 0
             xlated 488B  jited 336B  memlock 4096B  map_ids 7

 **# rm /sys/fs/bpf/xdp1**

 |
 | **# bpftool prog profile id 337 duration 10 cycles instructions llc_misses**

 ::

          51397 run_cnt
       40176203 cycles                                                 (83.05%)
       42518139 instructions    #   1.06 insns per cycle               (83.39%)
            123 llc_misses      #   2.89 LLC misses per million insns  (83.15%)

 |
 | Output below is for the trace logs.
 | Run in separate terminals:
 | **# bpftool prog tracelog**
 | **# bpftool prog load -L -d file.o**

 ::

     bpftool-620059  [004] d... 2634685.517903: bpf_trace_printk: btf_load size 665 r=5
     bpftool-620059  [004] d... 2634685.517912: bpf_trace_printk: map_create sample_map idx 0 type 2 value_size 4 value_btf_id 0 r=6
     bpftool-620059  [004] d... 2634685.517997: bpf_trace_printk: prog_load sample insn_cnt 13 r=7
     bpftool-620059  [004] d... 2634685.517999: bpf_trace_printk: close(5) = 0
	.. SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)

	================
	bpftool-prog
	================
	-------------------------------------------------------------------------------
	tool for inspection and simple manipulation of eBPF progs
	-------------------------------------------------------------------------------

	:Manual section: 8

	.. include:: substitutions.rst

	SYNOPSIS
	========

	bpftool [OPTIONS] prog COMMAND

	OPTIONS := { \|COMMON_OPTIONS\| \|
	{ -f \| --bpffs } \| { -m \| --mapcompat } \| { -n \| --nomount } \|
	{ -L \| --use-loader } }

	COMMANDS :=
	{ show \| list \| dump xlated \| dump jited \| pin \| load \|
	loadall \| help }

	PROG COMMANDS
	=============

	\| bpftool prog { show \| list } [PROG]
	\| bpftool prog dump xlated PROG [{file FILE \| opcodes \| visual \| linum}]
	\| bpftool prog dump jited PROG [{file FILE \| opcodes \| linum}]
	\| bpftool prog pin PROG FILE
	\| bpftool prog { load \| loadall } OBJ PATH [type TYPE] [map {idx IDX \| name NAME} MAP] [dev NAME] [pinmaps MAP_DIR]
	\| bpftool prog attach PROG ATTACH_TYPE [MAP]
	\| bpftool prog detach PROG ATTACH_TYPE [MAP]
	\| bpftool prog tracelog
	\| bpftool prog run PROG data_in FILE [data_out FILE [data_size_out L]] [ctx_in FILE [ctx_out FILE [ctx_size_out M]]] [repeat N]
	\| bpftool prog profile PROG [duration DURATION] METRICs
	\| bpftool prog help
	\|
	\| MAP := { id MAP_ID \| pinned FILE }
	\| PROG := { id PROG_ID \| pinned FILE \| tag PROG_TAG \| name PROG_NAME }
	\| TYPE := {
	\| socket \| kprobe \| kretprobe \| classifier \| action \|
	\| tracepoint \| raw_tracepoint \| xdp \| perf_event \| cgroup/skb \|
	\| cgroup/sock \| cgroup/dev \| lwt_in \| lwt_out \| lwt_xmit \|
	\| lwt_seg6local \| sockops \| sk_skb \| sk_msg \| lirc_mode2 \|
	\| cgroup/bind4 \| cgroup/bind6 \| cgroup/post_bind4 \| cgroup/post_bind6 \|
	\| cgroup/connect4 \| cgroup/connect6 \| cgroup/getpeername4 \| cgroup/getpeername6 \|
	\| cgroup/getsockname4 \| cgroup/getsockname6 \| cgroup/sendmsg4 \| cgroup/sendmsg6 \|
	\| cgroup/recvmsg4 \| cgroup/recvmsg6 \| cgroup/sysctl \|
	\| cgroup/getsockopt \| cgroup/setsockopt \| cgroup/sock_release \|
	\| struct_ops \| fentry \| fexit \| freplace \| sk_lookup
	\| }
	\| ATTACH_TYPE := {
	\| sk_msg_verdict \| sk_skb_verdict \| sk_skb_stream_verdict \|
	\| sk_skb_stream_parser \| flow_dissector
	\| }
	\| METRICs := {
	\| cycles \| instructions \| l1d_loads \| llc_misses \|
	\| itlb_misses \| dtlb_misses
	\| }


	DESCRIPTION
	===========
	bpftool prog { show \| list } [PROG]
	Show information about loaded programs. If PROG is
	specified show information only about given programs,
	otherwise list all programs currently loaded on the system.
	In case of tag or name, PROG may match several
	programs which will all be shown.

	Output will start with program ID followed by program type and
	zero or more named attributes (depending on kernel version).

	Since Linux 5.1 the kernel can collect statistics on BPF
	programs (such as the total time spent running the program,
	and the number of times it was run). If available, bpftool
	shows such statistics. However, the kernel does not collect
	them by defaults, as it slightly impacts performance on each
	program run. Activation or deactivation of the feature is
	performed via the kernel.bpf_stats_enabled sysctl knob.

	Since Linux 5.8 bpftool is able to discover information about
	processes that hold open file descriptors (FDs) against BPF
	programs. On such kernels bpftool will automatically emit this
	information as well.

	bpftool prog dump xlated PROG [{ file FILE \| opcodes \| visual \| linum }]
	Dump eBPF instructions of the programs from the kernel. By
	default, eBPF will be disassembled and printed to standard
	output in human-readable format. In this case, opcodes
	controls if raw opcodes should be printed as well.

	In case of tag or name, PROG may match several
	programs which will all be dumped. However, if file or
	visual is specified, PROG must match a single program.

	If file is specified, the binary image will instead be
	written to FILE.

	If visual is specified, control flow graph (CFG) will be
	built instead, and eBPF instructions will be presented with
	CFG in DOT format, on standard output.

	If the programs have line_info available, the source line will
	be displayed by default. If linum is specified,
	the filename, line number and line column will also be
	displayed on top of the source line.

	bpftool prog dump jited PROG [{ file FILE \| opcodes \| linum }]
	Dump jited image (host machine code) of the program.

	If FILE is specified image will be written to a file,
	otherwise it will be disassembled and printed to stdout.
	PROG must match a single program when file is specified.

	opcodes controls if raw opcodes will be printed.

	If the prog has line_info available, the source line will
	be displayed by default. If linum is specified,
	the filename, line number and line column will also be
	displayed on top of the source line.

	bpftool prog pin PROG FILE
	Pin program PROG as FILE.

	Note: FILE must be located in bpffs mount. It must not
	contain a dot character ('.'), which is reserved for future
	extensions of bpffs.

	bpftool prog { load \| loadall } OBJ PATH [type TYPE] [map {idx IDX \| name NAME} MAP] [dev NAME] [pinmaps MAP_DIR]
	Load bpf program(s) from binary OBJ and pin as PATH.
	bpftool prog load pins only the first program from the
	OBJ as PATH. bpftool prog loadall pins all programs
	from the OBJ under PATH directory.
	type is optional, if not specified program type will be
	inferred from section names.
	By default bpftool will create new maps as declared in the ELF
	object being loaded. map parameter allows for the reuse
	of existing maps. It can be specified multiple times, each
	time for a different map. IDX refers to index of the map
	to be replaced in the ELF file counting from 0, while NAME
	allows to replace a map by name. MAP specifies the map to
	use, referring to it by id or through a pinned file.
	If dev NAME is specified program will be loaded onto
	given networking device (offload).
	Optional pinmaps argument can be provided to pin all
	maps under MAP_DIR directory.

	Note: PATH must be located in bpffs mount. It must not
	contain a dot character ('.'), which is reserved for future
	extensions of bpffs.

	bpftool prog attach PROG ATTACH_TYPE [MAP]
	Attach bpf program PROG (with type specified by
	ATTACH_TYPE). Most ATTACH_TYPEs require a MAP
	parameter, with the exception of flow_dissector which is
	attached to current networking name space.

	bpftool prog detach PROG ATTACH_TYPE [MAP]
	Detach bpf program PROG (with type specified by
	ATTACH_TYPE). Most ATTACH_TYPEs require a MAP
	parameter, with the exception of flow_dissector which is
	detached from the current networking name space.

	bpftool prog tracelog
	Dump the trace pipe of the system to the console (stdout).
	Hit <Ctrl+C> to stop printing. BPF programs can write to this
	trace pipe at runtime with the bpf_trace_printk\ () helper.
	This should be used only for debugging purposes. For
	streaming data from BPF programs to user space, one can use
	perf events (see also bpftool-map\ (8)).

	bpftool prog run PROG data_in FILE [data_out FILE [data_size_out L]] [ctx_in FILE [ctx_out FILE [ctx_size_out M]]] [repeat N]
	Run BPF program PROG in the kernel testing infrastructure
	for BPF, meaning that the program works on the data and
	context provided by the user, and not on actual packets or
	monitored functions etc. Return value and duration for the
	test run are printed out to the console.

	Input data is read from the FILE passed with data_in.
	If this FILE is "-", input data is read from standard
	input. Input context, if any, is read from FILE passed with
	ctx_in. Again, "-" can be used to read from standard
	input, but only if standard input is not already in use for
	input data. If a FILE is passed with data_out, output
	data is written to that file. Similarly, output context is
	written to the FILE passed with ctx_out. For both
	output flows, "-" can be used to print to the standard
	output (as plain text, or JSON if relevant option was
	passed). If output keywords are omitted, output data and
	context are discarded. Keywords data_size_out and
	ctx_size_out are used to pass the size (in bytes) for the
	output buffers to the kernel, although the default of 32 kB
	should be more than enough for most cases.

	Keyword repeat is used to indicate the number of
	consecutive runs to perform. Note that output data and
	context printed to files correspond to the last of those
	runs. The duration printed out at the end of the runs is an
	average over all runs performed by the command.

	Not all program types support test run. Among those which do,
	not all of them can take the ctx_in/ctx_out
	arguments. bpftool does not perform checks on program types.

	bpftool prog profile PROG [duration DURATION] METRICs
	Profile METRICs for bpf program PROG for DURATION
	seconds or until user hits <Ctrl+C>. DURATION is optional.
	If DURATION is not specified, the profiling will run up to
	UINT_MAX seconds.

	bpftool prog help
	Print short help message.

	OPTIONS
	=======
	.. include:: common_options.rst

	-f, --bpffs
	When showing BPF programs, show file names of pinned
	programs.

	-m, --mapcompat
	Allow loading maps with unknown map definitions.

	-n, --nomount
	Do not automatically attempt to mount any virtual file system
	(such as tracefs or BPF virtual file system) when necessary.

	-L, --use-loader
	Load program as a "loader" program. This is useful to debug
	the generation of such programs. When this option is in
	use, bpftool attempts to load the programs from the object
	file into the kernel, but does not pin them (therefore, the
	PATH must not be provided).

	When combined with the -d\ \\|\ --debug option,
	additional debug messages are generated, and the execution
	of the loader program will use the bpf_trace_printk\ ()
	helper to log each step of loading BTF, creating the maps,
	and loading the programs (see bpftool prog tracelog as
	a way to dump those messages).

	EXAMPLES
	========
	# bpftool prog show

	::

	10: xdp name some_prog tag 005a3d2123620c8b gpl run_time_ns 81632 run_cnt 10
	loaded_at 2017-09-29T20:11:00+0000 uid 0
	xlated 528B jited 370B memlock 4096B map_ids 10
	pids systemd(1)

	# bpftool --json --pretty prog show

	::

	[{
	"id": 10,
	"type": "xdp",
	"tag": "005a3d2123620c8b",
	"gpl_compatible": true,
	"run_time_ns": 81632,
	"run_cnt": 10,
	"loaded_at": 1506715860,
	"uid": 0,
	"bytes_xlated": 528,
	"jited": true,
	"bytes_jited": 370,
	"bytes_memlock": 4096,
	"map_ids": [10
	],
	"pids": [{
	"pid": 1,
	"comm": "systemd"
	}
	]
	}
	]

	\|
	\| # bpftool prog dump xlated id 10 file /tmp/t
	\| $ ls -l /tmp/t

	::

	-rw------- 1 root root 560 Jul 22 01:42 /tmp/t

	# bpftool prog dump jited tag 005a3d2123620c8b

	::

	0: push %rbp
	1: mov %rsp,%rbp
	2: sub $0x228,%rsp
	3: sub $0x28,%rbp
	4: mov %rbx,0x0(%rbp)

	\|
	\| # mount -t bpf none /sys/fs/bpf/
	\| # bpftool prog pin id 10 /sys/fs/bpf/prog
	\| # bpftool prog load ./my_prog.o /sys/fs/bpf/prog2
	\| # ls -l /sys/fs/bpf/

	::

	-rw------- 1 root root 0 Jul 22 01:43 prog
	-rw------- 1 root root 0 Jul 22 01:44 prog2

	# bpftool prog dump jited pinned /sys/fs/bpf/prog opcodes

	::

	0: push %rbp
	55
	1: mov %rsp,%rbp
	48 89 e5
	4: sub $0x228,%rsp
	48 81 ec 28 02 00 00
	b: sub $0x28,%rbp
	48 83 ed 28
	f: mov %rbx,0x0(%rbp)
	48 89 5d 00

	\|
	\| # bpftool prog load xdp1_kern.o /sys/fs/bpf/xdp1 type xdp map name rxcnt id 7
	\| # bpftool prog show pinned /sys/fs/bpf/xdp1

	::

	9: xdp name xdp_prog1 tag 539ec6ce11b52f98 gpl
	loaded_at 2018-06-25T16:17:31-0700 uid 0
	xlated 488B jited 336B memlock 4096B map_ids 7

	# rm /sys/fs/bpf/xdp1

	\|
	\| # bpftool prog profile id 337 duration 10 cycles instructions llc_misses

	::

	51397 run_cnt
	40176203 cycles (83.05%)
	42518139 instructions # 1.06 insns per cycle (83.39%)
	123 llc_misses # 2.89 LLC misses per million insns (83.15%)

	\|
	\| Output below is for the trace logs.
	\| Run in separate terminals:
	\| # bpftool prog tracelog
	\| # bpftool prog load -L -d file.o

	::

	bpftool-620059 [004] d... 2634685.517903: bpf_trace_printk: btf_load size 665 r=5
	bpftool-620059 [004] d... 2634685.517912: bpf_trace_printk: map_create sample_map idx 0 type 2 value_size 4 value_btf_id 0 r=6
	bpftool-620059 [004] d... 2634685.517997: bpf_trace_printk: prog_load sample insn_cnt 13 r=7
	bpftool-620059 [004] d... 2634685.517999: bpf_trace_printk: close(5) = 0