| .. SPDX-License-Identifier: GPL-2.0 |
| .. include:: <isonum.txt> |
| |
| =================================== |
| Compute Express Link Memory Devices |
| =================================== |
| |
| A Compute Express Link Memory Device is a CXL component that implements the |
| CXL.mem protocol. It contains some amount of volatile memory, persistent memory, |
| or both. It is enumerated as a PCI device for configuration and passing |
| messages over an MMIO mailbox. Its contribution to the System Physical |
| Address space is handled via HDM (Host Managed Device Memory) decoders |
| that optionally define a device's contribution to an interleaved address |
| range across multiple devices underneath a host-bridge or interleaved |
| across host-bridges. |
| |
| CXL Bus: Theory of Operation |
| ============================ |
| Similar to how a RAID driver takes disk objects and assembles them into a new |
| logical device, the CXL subsystem is tasked to take PCIe and ACPI objects and |
| assemble them into a CXL.mem decode topology. The need for runtime configuration |
| of the CXL.mem topology is also similar to RAID in that different environments |
| with the same hardware configuration may decide to assemble the topology in |
| contrasting ways. One may choose performance (RAID0) striping memory across |
| multiple Host Bridges and endpoints while another may opt for fault tolerance |
| and disable any striping in the CXL.mem topology. |
| |
| Platform firmware enumerates a menu of interleave options at the "CXL root port" |
| (Linux term for the top of the CXL decode topology). From there, PCIe topology |
| dictates which endpoints can participate in which Host Bridge decode regimes. |
| Each PCIe Switch in the path between the root and an endpoint introduces a point |
| at which the interleave can be split. For example platform firmware may say at a |
| given range only decodes to 1 one Host Bridge, but that Host Bridge may in turn |
| interleave cycles across multiple Root Ports. An intervening Switch between a |
| port and an endpoint may interleave cycles across multiple Downstream Switch |
| Ports, etc. |
| |
| Here is a sample listing of a CXL topology defined by 'cxl_test'. The 'cxl_test' |
| module generates an emulated CXL topology of 2 Host Bridges each with 2 Root |
| Ports. Each of those Root Ports are connected to 2-way switches with endpoints |
| connected to those downstream ports for a total of 8 endpoints:: |
| |
| # cxl list -BEMPu -b cxl_test |
| { |
| "bus":"root3", |
| "provider":"cxl_test", |
| "ports:root3":[ |
| { |
| "port":"port5", |
| "host":"cxl_host_bridge.1", |
| "ports:port5":[ |
| { |
| "port":"port8", |
| "host":"cxl_switch_uport.1", |
| "endpoints:port8":[ |
| { |
| "endpoint":"endpoint9", |
| "host":"mem2", |
| "memdev":{ |
| "memdev":"mem2", |
| "pmem_size":"256.00 MiB (268.44 MB)", |
| "ram_size":"256.00 MiB (268.44 MB)", |
| "serial":"0x1", |
| "numa_node":1, |
| "host":"cxl_mem.1" |
| } |
| }, |
| { |
| "endpoint":"endpoint15", |
| "host":"mem6", |
| "memdev":{ |
| "memdev":"mem6", |
| "pmem_size":"256.00 MiB (268.44 MB)", |
| "ram_size":"256.00 MiB (268.44 MB)", |
| "serial":"0x5", |
| "numa_node":1, |
| "host":"cxl_mem.5" |
| } |
| } |
| ] |
| }, |
| { |
| "port":"port12", |
| "host":"cxl_switch_uport.3", |
| "endpoints:port12":[ |
| { |
| "endpoint":"endpoint17", |
| "host":"mem8", |
| "memdev":{ |
| "memdev":"mem8", |
| "pmem_size":"256.00 MiB (268.44 MB)", |
| "ram_size":"256.00 MiB (268.44 MB)", |
| "serial":"0x7", |
| "numa_node":1, |
| "host":"cxl_mem.7" |
| } |
| }, |
| { |
| "endpoint":"endpoint13", |
| "host":"mem4", |
| "memdev":{ |
| "memdev":"mem4", |
| "pmem_size":"256.00 MiB (268.44 MB)", |
| "ram_size":"256.00 MiB (268.44 MB)", |
| "serial":"0x3", |
| "numa_node":1, |
| "host":"cxl_mem.3" |
| } |
| } |
| ] |
| } |
| ] |
| }, |
| { |
| "port":"port4", |
| "host":"cxl_host_bridge.0", |
| "ports:port4":[ |
| { |
| "port":"port6", |
| "host":"cxl_switch_uport.0", |
| "endpoints:port6":[ |
| { |
| "endpoint":"endpoint7", |
| "host":"mem1", |
| "memdev":{ |
| "memdev":"mem1", |
| "pmem_size":"256.00 MiB (268.44 MB)", |
| "ram_size":"256.00 MiB (268.44 MB)", |
| "serial":"0", |
| "numa_node":0, |
| "host":"cxl_mem.0" |
| } |
| }, |
| { |
| "endpoint":"endpoint14", |
| "host":"mem5", |
| "memdev":{ |
| "memdev":"mem5", |
| "pmem_size":"256.00 MiB (268.44 MB)", |
| "ram_size":"256.00 MiB (268.44 MB)", |
| "serial":"0x4", |
| "numa_node":0, |
| "host":"cxl_mem.4" |
| } |
| } |
| ] |
| }, |
| { |
| "port":"port10", |
| "host":"cxl_switch_uport.2", |
| "endpoints:port10":[ |
| { |
| "endpoint":"endpoint16", |
| "host":"mem7", |
| "memdev":{ |
| "memdev":"mem7", |
| "pmem_size":"256.00 MiB (268.44 MB)", |
| "ram_size":"256.00 MiB (268.44 MB)", |
| "serial":"0x6", |
| "numa_node":0, |
| "host":"cxl_mem.6" |
| } |
| }, |
| { |
| "endpoint":"endpoint11", |
| "host":"mem3", |
| "memdev":{ |
| "memdev":"mem3", |
| "pmem_size":"256.00 MiB (268.44 MB)", |
| "ram_size":"256.00 MiB (268.44 MB)", |
| "serial":"0x2", |
| "numa_node":0, |
| "host":"cxl_mem.2" |
| } |
| } |
| ] |
| } |
| ] |
| } |
| ] |
| } |
| |
| In that listing each "root", "port", and "endpoint" object correspond a kernel |
| 'struct cxl_port' object. A 'cxl_port' is a device that can decode CXL.mem to |
| its descendants. So "root" claims non-PCIe enumerable platform decode ranges and |
| decodes them to "ports", "ports" decode to "endpoints", and "endpoints" |
| represent the decode from SPA (System Physical Address) to DPA (Device Physical |
| Address). |
| |
| Continuing the RAID analogy, disks have both topology metadata and on device |
| metadata that determine RAID set assembly. CXL Port topology and CXL Port link |
| status is metadata for CXL.mem set assembly. The CXL Port topology is enumerated |
| by the arrival of a CXL.mem device. I.e. unless and until the PCIe core attaches |
| the cxl_pci driver to a CXL Memory Expander there is no role for CXL Port |
| objects. Conversely for hot-unplug / removal scenarios, there is no need for |
| the Linux PCI core to tear down switch-level CXL resources because the endpoint |
| ->remove() event cleans up the port data that was established to support that |
| Memory Expander. |
| |
| The port metadata and potential decode schemes that a give memory device may |
| participate can be determined via a command like:: |
| |
| # cxl list -BDMu -d root -m mem3 |
| { |
| "bus":"root3", |
| "provider":"cxl_test", |
| "decoders:root3":[ |
| { |
| "decoder":"decoder3.1", |
| "resource":"0x8030000000", |
| "size":"512.00 MiB (536.87 MB)", |
| "volatile_capable":true, |
| "nr_targets":2 |
| }, |
| { |
| "decoder":"decoder3.3", |
| "resource":"0x8060000000", |
| "size":"512.00 MiB (536.87 MB)", |
| "pmem_capable":true, |
| "nr_targets":2 |
| }, |
| { |
| "decoder":"decoder3.0", |
| "resource":"0x8020000000", |
| "size":"256.00 MiB (268.44 MB)", |
| "volatile_capable":true, |
| "nr_targets":1 |
| }, |
| { |
| "decoder":"decoder3.2", |
| "resource":"0x8050000000", |
| "size":"256.00 MiB (268.44 MB)", |
| "pmem_capable":true, |
| "nr_targets":1 |
| } |
| ], |
| "memdevs:root3":[ |
| { |
| "memdev":"mem3", |
| "pmem_size":"256.00 MiB (268.44 MB)", |
| "ram_size":"256.00 MiB (268.44 MB)", |
| "serial":"0x2", |
| "numa_node":0, |
| "host":"cxl_mem.2" |
| } |
| ] |
| } |
| |
| ...which queries the CXL topology to ask "given CXL Memory Expander with a kernel |
| device name of 'mem3' which platform level decode ranges may this device |
| participate". A given expander can participate in multiple CXL.mem interleave |
| sets simultaneously depending on how many decoder resource it has. In this |
| example mem3 can participate in one or more of a PMEM interleave that spans to |
| Host Bridges, a PMEM interleave that targets a single Host Bridge, a Volatile |
| memory interleave that spans 2 Host Bridges, and a Volatile memory interleave |
| that only targets a single Host Bridge. |
| |
| Conversely the memory devices that can participate in a given platform level |
| decode scheme can be determined via a command like the following:: |
| |
| # cxl list -MDu -d 3.2 |
| [ |
| { |
| "memdevs":[ |
| { |
| "memdev":"mem1", |
| "pmem_size":"256.00 MiB (268.44 MB)", |
| "ram_size":"256.00 MiB (268.44 MB)", |
| "serial":"0", |
| "numa_node":0, |
| "host":"cxl_mem.0" |
| }, |
| { |
| "memdev":"mem5", |
| "pmem_size":"256.00 MiB (268.44 MB)", |
| "ram_size":"256.00 MiB (268.44 MB)", |
| "serial":"0x4", |
| "numa_node":0, |
| "host":"cxl_mem.4" |
| }, |
| { |
| "memdev":"mem7", |
| "pmem_size":"256.00 MiB (268.44 MB)", |
| "ram_size":"256.00 MiB (268.44 MB)", |
| "serial":"0x6", |
| "numa_node":0, |
| "host":"cxl_mem.6" |
| }, |
| { |
| "memdev":"mem3", |
| "pmem_size":"256.00 MiB (268.44 MB)", |
| "ram_size":"256.00 MiB (268.44 MB)", |
| "serial":"0x2", |
| "numa_node":0, |
| "host":"cxl_mem.2" |
| } |
| ] |
| }, |
| { |
| "root decoders":[ |
| { |
| "decoder":"decoder3.2", |
| "resource":"0x8050000000", |
| "size":"256.00 MiB (268.44 MB)", |
| "pmem_capable":true, |
| "nr_targets":1 |
| } |
| ] |
| } |
| ] |
| |
| ...where the naming scheme for decoders is "decoder<port_id>.<instance_id>". |
| |
| Driver Infrastructure |
| ===================== |
| |
| This section covers the driver infrastructure for a CXL memory device. |
| |
| CXL Memory Device |
| ----------------- |
| |
| .. kernel-doc:: drivers/cxl/pci.c |
| :doc: cxl pci |
| |
| .. kernel-doc:: drivers/cxl/pci.c |
| :internal: |
| |
| .. kernel-doc:: drivers/cxl/mem.c |
| :doc: cxl mem |
| |
| CXL Port |
| -------- |
| .. kernel-doc:: drivers/cxl/port.c |
| :doc: cxl port |
| |
| CXL Core |
| -------- |
| .. kernel-doc:: drivers/cxl/cxl.h |
| :doc: cxl objects |
| |
| .. kernel-doc:: drivers/cxl/cxl.h |
| :internal: |
| |
| .. kernel-doc:: drivers/cxl/core/port.c |
| :doc: cxl core |
| |
| .. kernel-doc:: drivers/cxl/core/port.c |
| :identifiers: |
| |
| .. kernel-doc:: drivers/cxl/core/pci.c |
| :doc: cxl core pci |
| |
| .. kernel-doc:: drivers/cxl/core/pci.c |
| :identifiers: |
| |
| .. kernel-doc:: drivers/cxl/core/pmem.c |
| :doc: cxl pmem |
| |
| .. kernel-doc:: drivers/cxl/core/regs.c |
| :doc: cxl registers |
| |
| .. kernel-doc:: drivers/cxl/core/mbox.c |
| :doc: cxl mbox |
| |
| CXL Regions |
| ----------- |
| .. kernel-doc:: drivers/cxl/core/region.c |
| :doc: cxl core region |
| |
| .. kernel-doc:: drivers/cxl/core/region.c |
| :identifiers: |
| |
| External Interfaces |
| =================== |
| |
| CXL IOCTL Interface |
| ------------------- |
| |
| .. kernel-doc:: include/uapi/linux/cxl_mem.h |
| :doc: UAPI |
| |
| .. kernel-doc:: include/uapi/linux/cxl_mem.h |
| :internal: |
