blob: caefac07af927f0e62516ef1c4bda3bf6b3b0ce6 [file] [log] [blame]
// SPDX-License-Identifier: GPL-2.0-or-later
/*
* Driver for the Auvitek USB bridge
*
* Copyright (c) 2008 Steven Toth <stoth@linuxtv.org>
*/
#include "au0828.h"
#include "au8522.h"
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/videodev2.h>
#include <media/v4l2-common.h>
#include <linux/mutex.h>
/* Due to enum tuner_pad_index */
#include <media/tuner.h>
/*
* 1 = General debug messages
* 2 = USB handling
* 4 = I2C related
* 8 = Bridge related
* 16 = IR related
*/
int au0828_debug;
module_param_named(debug, au0828_debug, int, 0644);
MODULE_PARM_DESC(debug,
"set debug bitmask: 1=general, 2=USB, 4=I2C, 8=bridge, 16=IR");
static unsigned int disable_usb_speed_check;
module_param(disable_usb_speed_check, int, 0444);
MODULE_PARM_DESC(disable_usb_speed_check,
"override min bandwidth requirement of 480M bps");
#define _AU0828_BULKPIPE 0x03
#define _BULKPIPESIZE 0xffff
static int send_control_msg(struct au0828_dev *dev, u16 request, u32 value,
u16 index);
static int recv_control_msg(struct au0828_dev *dev, u16 request, u32 value,
u16 index, unsigned char *cp, u16 size);
/* USB Direction */
#define CMD_REQUEST_IN 0x00
#define CMD_REQUEST_OUT 0x01
u32 au0828_readreg(struct au0828_dev *dev, u16 reg)
{
u8 result = 0;
recv_control_msg(dev, CMD_REQUEST_IN, 0, reg, &result, 1);
dprintk(8, "%s(0x%04x) = 0x%02x\n", __func__, reg, result);
return result;
}
u32 au0828_writereg(struct au0828_dev *dev, u16 reg, u32 val)
{
dprintk(8, "%s(0x%04x, 0x%02x)\n", __func__, reg, val);
return send_control_msg(dev, CMD_REQUEST_OUT, val, reg);
}
static int send_control_msg(struct au0828_dev *dev, u16 request, u32 value,
u16 index)
{
int status = -ENODEV;
if (dev->usbdev) {
/* cp must be memory that has been allocated by kmalloc */
status = usb_control_msg(dev->usbdev,
usb_sndctrlpipe(dev->usbdev, 0),
request,
USB_DIR_OUT | USB_TYPE_VENDOR |
USB_RECIP_DEVICE,
value, index, NULL, 0, 1000);
status = min(status, 0);
if (status < 0) {
pr_err("%s() Failed sending control message, error %d.\n",
__func__, status);
}
}
return status;
}
static int recv_control_msg(struct au0828_dev *dev, u16 request, u32 value,
u16 index, unsigned char *cp, u16 size)
{
int status = -ENODEV;
mutex_lock(&dev->mutex);
if (dev->usbdev) {
status = usb_control_msg(dev->usbdev,
usb_rcvctrlpipe(dev->usbdev, 0),
request,
USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
value, index,
dev->ctrlmsg, size, 1000);
status = min(status, 0);
if (status < 0) {
pr_err("%s() Failed receiving control message, error %d.\n",
__func__, status);
}
/* the host controller requires heap allocated memory, which
is why we didn't just pass "cp" into usb_control_msg */
memcpy(cp, dev->ctrlmsg, size);
}
mutex_unlock(&dev->mutex);
return status;
}
#ifdef CONFIG_MEDIA_CONTROLLER
static void au0828_media_graph_notify(struct media_entity *new,
void *notify_data);
#endif
static void au0828_unregister_media_device(struct au0828_dev *dev)
{
#ifdef CONFIG_MEDIA_CONTROLLER
struct media_device *mdev = dev->media_dev;
struct media_entity_notify *notify, *nextp;
if (!mdev || !media_devnode_is_registered(mdev->devnode))
return;
/* Remove au0828 entity_notify callbacks */
list_for_each_entry_safe(notify, nextp, &mdev->entity_notify, list) {
if (notify->notify != au0828_media_graph_notify)
continue;
media_device_unregister_entity_notify(mdev, notify);
}
/* clear enable_source, disable_source */
mutex_lock(&mdev->graph_mutex);
dev->media_dev->source_priv = NULL;
dev->media_dev->enable_source = NULL;
dev->media_dev->disable_source = NULL;
mutex_unlock(&mdev->graph_mutex);
media_device_delete(dev->media_dev, KBUILD_MODNAME, THIS_MODULE);
dev->media_dev = NULL;
#endif
}
void au0828_usb_release(struct au0828_dev *dev)
{
au0828_unregister_media_device(dev);
/* I2C */
au0828_i2c_unregister(dev);
kfree(dev);
}
static void au0828_usb_disconnect(struct usb_interface *interface)
{
struct au0828_dev *dev = usb_get_intfdata(interface);
dprintk(1, "%s()\n", __func__);
/* there is a small window after disconnect, before
dev->usbdev is NULL, for poll (e.g: IR) try to access
the device and fill the dmesg with error messages.
Set the status so poll routines can check and avoid
access after disconnect.
*/
set_bit(DEV_DISCONNECTED, &dev->dev_state);
au0828_rc_unregister(dev);
/* Digital TV */
au0828_dvb_unregister(dev);
usb_set_intfdata(interface, NULL);
mutex_lock(&dev->mutex);
dev->usbdev = NULL;
mutex_unlock(&dev->mutex);
if (au0828_analog_unregister(dev)) {
/*
* No need to call au0828_usb_release() if V4L2 is enabled,
* as this is already called via au0828_usb_v4l2_release()
*/
return;
}
au0828_usb_release(dev);
}
static int au0828_media_device_init(struct au0828_dev *dev,
struct usb_device *udev)
{
#ifdef CONFIG_MEDIA_CONTROLLER
struct media_device *mdev;
mdev = media_device_usb_allocate(udev, KBUILD_MODNAME, THIS_MODULE);
if (IS_ERR(mdev))
return PTR_ERR(mdev);
dev->media_dev = mdev;
#endif
return 0;
}
#ifdef CONFIG_MEDIA_CONTROLLER
static void au0828_media_graph_notify(struct media_entity *new,
void *notify_data)
{
struct au0828_dev *dev = (struct au0828_dev *) notify_data;
int ret;
struct media_entity *entity, *mixer = NULL, *decoder = NULL;
if (!new) {
/*
* Called during au0828 probe time to connect
* entities that were created prior to registering
* the notify handler. Find mixer and decoder.
*/
media_device_for_each_entity(entity, dev->media_dev) {
if (entity->function == MEDIA_ENT_F_AUDIO_MIXER)
mixer = entity;
else if (entity->function == MEDIA_ENT_F_ATV_DECODER)
decoder = entity;
}
goto create_link;
}
switch (new->function) {
case MEDIA_ENT_F_AUDIO_MIXER:
mixer = new;
if (dev->decoder)
decoder = dev->decoder;
break;
case MEDIA_ENT_F_ATV_DECODER:
/* In case, Mixer is added first, find mixer and create link */
media_device_for_each_entity(entity, dev->media_dev) {
if (entity->function == MEDIA_ENT_F_AUDIO_MIXER)
mixer = entity;
}
decoder = new;
break;
default:
break;
}
create_link:
if (decoder && mixer) {
ret = media_get_pad_index(decoder, false,
PAD_SIGNAL_AUDIO);
if (ret >= 0)
ret = media_create_pad_link(decoder, ret,
mixer, 0,
MEDIA_LNK_FL_ENABLED);
if (ret < 0)
dev_err(&dev->usbdev->dev,
"Mixer Pad Link Create Error: %d\n", ret);
}
}
static bool au0828_is_link_shareable(struct media_entity *owner,
struct media_entity *entity)
{
bool shareable = false;
/* Tuner link can be shared by audio, video, and VBI */
switch (owner->function) {
case MEDIA_ENT_F_IO_V4L:
case MEDIA_ENT_F_AUDIO_CAPTURE:
case MEDIA_ENT_F_IO_VBI:
if (entity->function == MEDIA_ENT_F_IO_V4L ||
entity->function == MEDIA_ENT_F_AUDIO_CAPTURE ||
entity->function == MEDIA_ENT_F_IO_VBI)
shareable = true;
break;
case MEDIA_ENT_F_DTV_DEMOD:
default:
break;
}
return shareable;
}
/* Callers should hold graph_mutex */
static int au0828_enable_source(struct media_entity *entity,
struct media_pipeline *pipe)
{
struct media_entity *source, *find_source;
struct media_entity *sink;
struct media_link *link, *found_link = NULL;
int ret = 0;
struct media_device *mdev = entity->graph_obj.mdev;
struct au0828_dev *dev;
if (!mdev)
return -ENODEV;
dev = mdev->source_priv;
/*
* For Audio and V4L2 entity, find the link to which decoder
* is the sink. Look for an active link between decoder and
* source (tuner/s-video/Composite), if one exists, nothing
* to do. If not, look for any active links between source
* and any other entity. If one exists, source is busy. If
* source is free, setup link and start pipeline from source.
* For DVB FE entity, the source for the link is the tuner.
* Check if tuner is available and setup link and start
* pipeline.
*/
if (entity->function == MEDIA_ENT_F_DTV_DEMOD) {
sink = entity;
find_source = dev->tuner;
} else {
/* Analog isn't configured or register failed */
if (!dev->decoder) {
ret = -ENODEV;
goto end;
}
sink = dev->decoder;
/*
* Default input is tuner and default input_type
* is AU0828_VMUX_TELEVISION.
*
* There is a problem when s_input is called to
* change the default input. s_input will try to
* enable_source before attempting to change the
* input on the device, and will end up enabling
* default source which is tuner.
*
* Additional logic is necessary in au0828 to detect
* that the input has changed and enable the right
* source. au0828 handles this case in its s_input.
* It will disable the old source and enable the new
* source.
*
*/
if (dev->input_type == AU0828_VMUX_TELEVISION)
find_source = dev->tuner;
else if (dev->input_type == AU0828_VMUX_SVIDEO ||
dev->input_type == AU0828_VMUX_COMPOSITE)
find_source = &dev->input_ent[dev->input_type];
else {
/* unknown input - let user select input */
ret = 0;
goto end;
}
}
/* Is there an active link between sink and source */
if (dev->active_link) {
if (dev->active_link_owner == entity) {
/* This check is necessary to handle multiple
* enable_source calls from v4l_ioctls during
* the course of video/vbi application run-time.
*/
pr_debug("%s already owns the tuner\n", entity->name);
ret = 0;
goto end;
} else if (au0828_is_link_shareable(dev->active_link_owner,
entity)) {
/* Either ALSA or Video own tuner. Sink is the same
* for both. Allow sharing the active link between
* their common source (tuner) and sink (decoder).
* Starting pipeline between sharing entity and sink
* will fail with pipe mismatch, while owner has an
* active pipeline. Switch pipeline ownership from
* user to owner when owner disables the source.
*/
dev->active_link_shared = true;
/* save the user info to use from disable */
dev->active_link_user = entity;
dev->active_link_user_pipe = pipe;
pr_debug("%s owns the tuner %s can share!\n",
dev->active_link_owner->name,
entity->name);
ret = 0;
goto end;
} else {
ret = -EBUSY;
goto end;
}
}
list_for_each_entry(link, &sink->links, list) {
/* Check sink, and source */
if (link->sink->entity == sink &&
link->source->entity == find_source) {
found_link = link;
break;
}
}
if (!found_link) {
ret = -ENODEV;
goto end;
}
/* activate link between source and sink and start pipeline */
source = found_link->source->entity;
ret = __media_entity_setup_link(found_link, MEDIA_LNK_FL_ENABLED);
if (ret) {
pr_err("Activate link from %s->%s. Error %d\n",
source->name, sink->name, ret);
goto end;
}
ret = __media_pipeline_start(entity, pipe);
if (ret) {
pr_err("Start Pipeline: %s->%s Error %d\n",
source->name, entity->name, ret);
ret = __media_entity_setup_link(found_link, 0);
if (ret)
pr_err("Deactivate link Error %d\n", ret);
goto end;
}
/* save link state to allow audio and video share the link
* and not disable the link while the other is using it.
* active_link_owner is used to deactivate the link.
*/
dev->active_link = found_link;
dev->active_link_owner = entity;
dev->active_source = source;
dev->active_sink = sink;
pr_info("Enabled Source: %s->%s->%s Ret %d\n",
dev->active_source->name, dev->active_sink->name,
dev->active_link_owner->name, ret);
end:
pr_debug("%s end: ent:%s fnc:%d ret %d\n",
__func__, entity->name, entity->function, ret);
return ret;
}
/* Callers should hold graph_mutex */
static void au0828_disable_source(struct media_entity *entity)
{
int ret = 0;
struct media_device *mdev = entity->graph_obj.mdev;
struct au0828_dev *dev;
if (!mdev)
return;
dev = mdev->source_priv;
if (!dev->active_link)
return;
/* link is active - stop pipeline from source
* (tuner/s-video/Composite) to the entity
* When DVB/s-video/Composite owns tuner, it won't be in
* shared state.
*/
if (dev->active_link->sink->entity == dev->active_sink &&
dev->active_link->source->entity == dev->active_source) {
/*
* Prevent video from deactivating link when audio
* has active pipeline and vice versa. In addition
* handle the case when more than one video/vbi
* application is sharing the link.
*/
bool owner_is_audio = false;
if (dev->active_link_owner->function ==
MEDIA_ENT_F_AUDIO_CAPTURE)
owner_is_audio = true;
if (dev->active_link_shared) {
pr_debug("Shared link owner %s user %s %d\n",
dev->active_link_owner->name,
entity->name, dev->users);
/* Handle video device users > 1
* When audio owns the shared link with
* more than one video users, avoid
* disabling the source and/or switching
* the owner until the last disable_source
* call from video _close(). Use dev->users to
* determine when to switch/disable.
*/
if (dev->active_link_owner != entity) {
/* video device has users > 1 */
if (owner_is_audio && dev->users > 1)
return;
dev->active_link_user = NULL;
dev->active_link_user_pipe = NULL;
dev->active_link_shared = false;
return;
}
/* video owns the link and has users > 1 */
if (!owner_is_audio && dev->users > 1)
return;
/* stop pipeline */
__media_pipeline_stop(dev->active_link_owner);
pr_debug("Pipeline stop for %s\n",
dev->active_link_owner->name);
ret = __media_pipeline_start(
dev->active_link_user,
dev->active_link_user_pipe);
if (ret) {
pr_err("Start Pipeline: %s->%s %d\n",
dev->active_source->name,
dev->active_link_user->name,
ret);
goto deactivate_link;
}
/* link user is now the owner */
dev->active_link_owner = dev->active_link_user;
dev->active_link_user = NULL;
dev->active_link_user_pipe = NULL;
dev->active_link_shared = false;
pr_debug("Pipeline started for %s\n",
dev->active_link_owner->name);
return;
} else if (!owner_is_audio && dev->users > 1)
/* video/vbi owns the link and has users > 1 */
return;
if (dev->active_link_owner != entity)
return;
/* stop pipeline */
__media_pipeline_stop(dev->active_link_owner);
pr_debug("Pipeline stop for %s\n",
dev->active_link_owner->name);
deactivate_link:
ret = __media_entity_setup_link(dev->active_link, 0);
if (ret)
pr_err("Deactivate link Error %d\n", ret);
pr_info("Disabled Source: %s->%s->%s Ret %d\n",
dev->active_source->name, dev->active_sink->name,
dev->active_link_owner->name, ret);
dev->active_link = NULL;
dev->active_link_owner = NULL;
dev->active_source = NULL;
dev->active_sink = NULL;
dev->active_link_shared = false;
dev->active_link_user = NULL;
}
}
#endif
static int au0828_media_device_register(struct au0828_dev *dev,
struct usb_device *udev)
{
#ifdef CONFIG_MEDIA_CONTROLLER
int ret;
struct media_entity *entity, *demod = NULL;
struct media_link *link;
if (!dev->media_dev)
return 0;
if (!media_devnode_is_registered(dev->media_dev->devnode)) {
/* register media device */
ret = media_device_register(dev->media_dev);
if (ret) {
media_device_delete(dev->media_dev, KBUILD_MODNAME,
THIS_MODULE);
dev->media_dev = NULL;
dev_err(&udev->dev,
"Media Device Register Error: %d\n", ret);
return ret;
}
} else {
/*
* Call au0828_media_graph_notify() to connect
* audio graph to our graph. In this case, audio
* driver registered the device and there is no
* entity_notify to be called when new entities
* are added. Invoke it now.
*/
au0828_media_graph_notify(NULL, (void *) dev);
}
/*
* Find tuner, decoder and demod.
*
* The tuner and decoder should be cached, as they'll be used by
* au0828_enable_source.
*
* It also needs to disable the link between tuner and
* decoder/demod, to avoid disable step when tuner is requested
* by video or audio. Note that this step can't be done until dvb
* graph is created during dvb register.
*/
media_device_for_each_entity(entity, dev->media_dev) {
switch (entity->function) {
case MEDIA_ENT_F_TUNER:
dev->tuner = entity;
break;
case MEDIA_ENT_F_ATV_DECODER:
dev->decoder = entity;
break;
case MEDIA_ENT_F_DTV_DEMOD:
demod = entity;
break;
}
}
/* Disable link between tuner->demod and/or tuner->decoder */
if (dev->tuner) {
list_for_each_entry(link, &dev->tuner->links, list) {
if (demod && link->sink->entity == demod)
media_entity_setup_link(link, 0);
if (dev->decoder && link->sink->entity == dev->decoder)
media_entity_setup_link(link, 0);
}
}
/* register entity_notify callback */
dev->entity_notify.notify_data = (void *) dev;
dev->entity_notify.notify = (void *) au0828_media_graph_notify;
ret = media_device_register_entity_notify(dev->media_dev,
&dev->entity_notify);
if (ret) {
dev_err(&udev->dev,
"Media Device register entity_notify Error: %d\n",
ret);
return ret;
}
/* set enable_source */
mutex_lock(&dev->media_dev->graph_mutex);
dev->media_dev->source_priv = (void *) dev;
dev->media_dev->enable_source = au0828_enable_source;
dev->media_dev->disable_source = au0828_disable_source;
mutex_unlock(&dev->media_dev->graph_mutex);
#endif
return 0;
}
static int au0828_usb_probe(struct usb_interface *interface,
const struct usb_device_id *id)
{
int ifnum;
int retval = 0;
struct au0828_dev *dev;
struct usb_device *usbdev = interface_to_usbdev(interface);
ifnum = interface->altsetting->desc.bInterfaceNumber;
if (ifnum != 0)
return -ENODEV;
dprintk(1, "%s() vendor id 0x%x device id 0x%x ifnum:%d\n", __func__,
le16_to_cpu(usbdev->descriptor.idVendor),
le16_to_cpu(usbdev->descriptor.idProduct),
ifnum);
/*
* Make sure we have 480 Mbps of bandwidth, otherwise things like
* video stream wouldn't likely work, since 12 Mbps is generally
* not enough even for most Digital TV streams.
*/
if (usbdev->speed != USB_SPEED_HIGH && disable_usb_speed_check == 0) {
pr_err("au0828: Device initialization failed.\n");
pr_err("au0828: Device must be connected to a high-speed USB 2.0 port.\n");
return -ENODEV;
}
dev = kzalloc(sizeof(*dev), GFP_KERNEL);
if (dev == NULL) {
pr_err("%s() Unable to allocate memory\n", __func__);
return -ENOMEM;
}
mutex_init(&dev->lock);
mutex_lock(&dev->lock);
mutex_init(&dev->mutex);
mutex_init(&dev->dvb.lock);
dev->usbdev = usbdev;
dev->boardnr = id->driver_info;
dev->board = au0828_boards[dev->boardnr];
/* Initialize the media controller */
retval = au0828_media_device_init(dev, usbdev);
if (retval) {
pr_err("%s() au0828_media_device_init failed\n",
__func__);
mutex_unlock(&dev->lock);
kfree(dev);
return retval;
}
retval = au0828_v4l2_device_register(interface, dev);
if (retval) {
au0828_usb_v4l2_media_release(dev);
mutex_unlock(&dev->lock);
kfree(dev);
return retval;
}
/* Power Up the bridge */
au0828_write(dev, REG_600, 1 << 4);
/* Bring up the GPIO's and supporting devices */
au0828_gpio_setup(dev);
/* I2C */
au0828_i2c_register(dev);
/* Setup */
au0828_card_setup(dev);
/*
* Store the pointer to the au0828_dev so it can be accessed in
* au0828_usb_disconnect
*/
usb_set_intfdata(interface, dev);
/* Analog TV */
retval = au0828_analog_register(dev, interface);
if (retval) {
pr_err("%s() au0828_analog_register failed to register on V4L2\n",
__func__);
mutex_unlock(&dev->lock);
goto done;
}
/* Digital TV */
retval = au0828_dvb_register(dev);
if (retval)
pr_err("%s() au0828_dvb_register failed\n",
__func__);
/* Remote controller */
au0828_rc_register(dev);
pr_info("Registered device AU0828 [%s]\n",
dev->board.name == NULL ? "Unset" : dev->board.name);
mutex_unlock(&dev->lock);
retval = au0828_media_device_register(dev, usbdev);
done:
if (retval < 0)
au0828_usb_disconnect(interface);
return retval;
}
static int au0828_suspend(struct usb_interface *interface,
pm_message_t message)
{
struct au0828_dev *dev = usb_get_intfdata(interface);
if (!dev)
return 0;
pr_info("Suspend\n");
au0828_rc_suspend(dev);
au0828_v4l2_suspend(dev);
au0828_dvb_suspend(dev);
/* FIXME: should suspend also ATV/DTV */
return 0;
}
static int au0828_resume(struct usb_interface *interface)
{
struct au0828_dev *dev = usb_get_intfdata(interface);
if (!dev)
return 0;
pr_info("Resume\n");
/* Power Up the bridge */
au0828_write(dev, REG_600, 1 << 4);
/* Bring up the GPIO's and supporting devices */
au0828_gpio_setup(dev);
au0828_rc_resume(dev);
au0828_v4l2_resume(dev);
au0828_dvb_resume(dev);
/* FIXME: should resume also ATV/DTV */
return 0;
}
static struct usb_driver au0828_usb_driver = {
.name = KBUILD_MODNAME,
.probe = au0828_usb_probe,
.disconnect = au0828_usb_disconnect,
.id_table = au0828_usb_id_table,
.suspend = au0828_suspend,
.resume = au0828_resume,
.reset_resume = au0828_resume,
};
static int __init au0828_init(void)
{
int ret;
if (au0828_debug & 1)
pr_info("%s() Debugging is enabled\n", __func__);
if (au0828_debug & 2)
pr_info("%s() USB Debugging is enabled\n", __func__);
if (au0828_debug & 4)
pr_info("%s() I2C Debugging is enabled\n", __func__);
if (au0828_debug & 8)
pr_info("%s() Bridge Debugging is enabled\n",
__func__);
if (au0828_debug & 16)
pr_info("%s() IR Debugging is enabled\n",
__func__);
pr_info("au0828 driver loaded\n");
ret = usb_register(&au0828_usb_driver);
if (ret)
pr_err("usb_register failed, error = %d\n", ret);
return ret;
}
static void __exit au0828_exit(void)
{
usb_deregister(&au0828_usb_driver);
}
module_init(au0828_init);
module_exit(au0828_exit);
MODULE_DESCRIPTION("Driver for Auvitek AU0828 based products");
MODULE_AUTHOR("Steven Toth <stoth@linuxtv.org>");
MODULE_LICENSE("GPL");
MODULE_VERSION("0.0.3");