| What: /sys/bus/iio/devices/iio:deviceX/in_accel_raw_range |
| KernelVersion: 6.1 |
| Contact: linux-iio@vger.kernel.org |
| Description: |
| Raw (unscaled) range for acceleration readings. Unit after |
| application of scale is m/s^2. Note that this doesn't affects |
| the scale (which should be used when changing the maximum and |
| minimum readable value affects also the reading scaling factor). |
| |
| What: /sys/bus/iio/devices/iio:deviceX/in_anglvel_raw_range |
| KernelVersion: 6.1 |
| Contact: linux-iio@vger.kernel.org |
| Description: |
| Range for angular velocity readings in radians per second. Note |
| that this does not affects the scale (which should be used when |
| changing the maximum and minimum readable value affects also the |
| reading scaling factor). |
| |
| What: /sys/bus/iio/devices/iio:deviceX/in_accel_raw_range_available |
| KernelVersion: 6.1 |
| Contact: linux-iio@vger.kernel.org |
| Description: |
| List of allowed values for in_accel_raw_range attribute |
| |
| What: /sys/bus/iio/devices/iio:deviceX/in_anglvel_raw_range_available |
| KernelVersion: 6.1 |
| Contact: linux-iio@vger.kernel.org |
| Description: |
| List of allowed values for in_anglvel_raw_range attribute |
| |
| What: /sys/bus/iio/devices/iio:deviceX/in_magn_calibration_fast_enable |
| KernelVersion: 6.1 |
| Contact: linux-iio@vger.kernel.org |
| Description: |
| Can be 1 or 0. Enables/disables the "Fast Magnetometer |
| Calibration" HW function. |
| |
| What: /sys/bus/iio/devices/iio:deviceX/fusion_enable |
| KernelVersion: 6.1 |
| Contact: linux-iio@vger.kernel.org |
| Description: |
| Can be 1 or 0. Enables/disables the "sensor fusion" (a.k.a. |
| NDOF) HW function. |
| |
| What: /sys/bus/iio/devices/iio:deviceX/calibration_data |
| KernelVersion: 6.1 |
| Contact: linux-iio@vger.kernel.org |
| Description: |
| Reports the binary calibration data blob for the IMU sensors. |
| |
| What: /sys/bus/iio/devices/iio:deviceX/in_accel_calibration_auto_status |
| KernelVersion: 6.1 |
| Contact: linux-iio@vger.kernel.org |
| Description: |
| Reports the autocalibration status for the accelerometer sensor. |
| Can be 0 (calibration non even enabled) or 1 to 5 where the greater |
| the number, the better the calibration status. |
| |
| What: /sys/bus/iio/devices/iio:deviceX/in_gyro_calibration_auto_status |
| KernelVersion: 6.1 |
| Contact: linux-iio@vger.kernel.org |
| Description: |
| Reports the autocalibration status for the gyroscope sensor. |
| Can be 0 (calibration non even enabled) or 1 to 5 where the greater |
| the number, the better the calibration status. |
| |
| What: /sys/bus/iio/devices/iio:deviceX/in_magn_calibration_auto_status |
| KernelVersion: 6.1 |
| Contact: linux-iio@vger.kernel.org |
| Description: |
| Reports the autocalibration status for the magnetometer sensor. |
| Can be 0 (calibration non even enabled) or 1 to 5 where the greater |
| the number, the better the calibration status. |
| |
| What: /sys/bus/iio/devices/iio:deviceX/sys_calibration_auto_status |
| KernelVersion: 6.1 |
| Contact: linux-iio@vger.kernel.org |
| Description: |
| Reports the status for the IMU overall autocalibration. |
| Can be 0 (calibration non even enabled) or 1 to 5 where the greater |
| the number, the better the calibration status. |
