blob: 1d64e8337aa4b2fe16fab4aa6b9d9b09e99a29c8 [file] [log] [blame]
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/sound/fsl,spdif.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Freescale Sony/Philips Digital Interface Format (S/PDIF) Controller
maintainers:
- Shengjiu Wang <shengjiu.wang@nxp.com>
description: |
The Freescale S/PDIF audio block is a stereo transceiver that allows the
processor to receive and transmit digital audio via an coaxial cable or
a fibre cable.
properties:
compatible:
enum:
- fsl,imx35-spdif
- fsl,vf610-spdif
- fsl,imx6sx-spdif
- fsl,imx8qm-spdif
- fsl,imx8qxp-spdif
- fsl,imx8mq-spdif
- fsl,imx8mm-spdif
- fsl,imx8mn-spdif
- fsl,imx8ulp-spdif
reg:
maxItems: 1
interrupts:
maxItems: 1
dmas:
items:
- description: DMA controller phandle and request line for RX
- description: DMA controller phandle and request line for TX
dma-names:
items:
- const: rx
- const: tx
clocks:
items:
- description: The core clock of spdif controller.
- description: Clock for tx0 and rx0.
- description: Clock for tx1 and rx1.
- description: Clock for tx2 and rx2.
- description: Clock for tx3 and rx3.
- description: Clock for tx4 and rx4.
- description: Clock for tx5 and rx5.
- description: Clock for tx6 and rx6.
- description: Clock for tx7 and rx7.
- description: The spba clock is required when SPDIF is placed as a bus
slave of the Shared Peripheral Bus and when two or more bus masters
(CPU, DMA or DSP) try to access it. This property is optional depending
on the SoC design.
- description: PLL clock source for 8kHz series rate, optional.
- description: PLL clock source for 11khz series rate, optional.
minItems: 9
clock-names:
items:
- const: core
- const: rxtx0
- const: rxtx1
- const: rxtx2
- const: rxtx3
- const: rxtx4
- const: rxtx5
- const: rxtx6
- const: rxtx7
- const: spba
- const: pll8k
- const: pll11k
minItems: 9
big-endian:
$ref: /schemas/types.yaml#/definitions/flag
description: |
If this property is absent, the native endian mode will be in use
as default, or the big endian mode will be in use for all the device
registers. Set this flag for HCDs with big endian descriptors and big
endian registers.
required:
- compatible
- reg
- interrupts
- dmas
- dma-names
- clocks
- clock-names
additionalProperties: false
examples:
- |
spdif@2004000 {
compatible = "fsl,imx35-spdif";
reg = <0x02004000 0x4000>;
interrupts = <0 52 0x04>;
dmas = <&sdma 14 18 0>,
<&sdma 15 18 0>;
dma-names = "rx", "tx";
clocks = <&clks 197>, <&clks 3>,
<&clks 197>, <&clks 107>,
<&clks 0>, <&clks 118>,
<&clks 62>, <&clks 139>,
<&clks 0>;
clock-names = "core", "rxtx0",
"rxtx1", "rxtx2",
"rxtx3", "rxtx4",
"rxtx5", "rxtx6",
"rxtx7";
big-endian;
};