blob: cb1190b77db3530e8473165cba4f2f0cfd17d0c3 [file] [log] [blame]
// SPDX-License-Identifier: GPL-2.0 OR MIT
/dts-v1/;
#include <dt-bindings/input/input.h>
#include "tegra20-colibri.dtsi"
/ {
model = "Toradex Colibri T20 on Colibri Evaluation Board";
compatible = "toradex,colibri_t20-eval-v3", "toradex,colibri_t20",
"nvidia,tegra20";
aliases {
rtc0 = "/i2c@7000c000/rtc@68";
rtc1 = "/i2c@7000d000/pmic@34";
rtc2 = "/rtc@7000e000";
serial0 = &uarta;
serial1 = &uartd;
serial2 = &uartb;
};
chosen {
stdout-path = "serial0:115200n8";
};
host1x@50000000 {
dc@54200000 {
rgb {
status = "okay";
nvidia,panel = <&panel>;
};
};
hdmi@54280000 {
status = "okay";
hdmi-supply = <&reg_5v0>;
};
};
pinmux@70000014 {
state_default: pinmux {
bl-on {
nvidia,tristate = <TEGRA_PIN_DISABLE>;
};
ddc {
nvidia,tristate = <TEGRA_PIN_DISABLE>;
};
hotplug-detect {
nvidia,tristate = <TEGRA_PIN_DISABLE>;
};
i2c {
nvidia,tristate = <TEGRA_PIN_DISABLE>;
};
lcd {
nvidia,tristate = <TEGRA_PIN_DISABLE>;
};
lm1 {
nvidia,tristate = <TEGRA_PIN_DISABLE>;
};
mmc {
nvidia,tristate = <TEGRA_PIN_DISABLE>;
};
mmccd {
nvidia,tristate = <TEGRA_PIN_DISABLE>;
};
sdc {
nvidia,tristate = <TEGRA_PIN_DISABLE>;
};
sdb_sdd {
nvidia,tristate = <TEGRA_PIN_DISABLE>;
};
ssp {
nvidia,tristate = <TEGRA_PIN_DISABLE>;
};
uart-a {
nvidia,tristate = <TEGRA_PIN_DISABLE>;
};
uart-b {
nvidia,tristate = <TEGRA_PIN_DISABLE>;
};
uart-c {
nvidia,tristate = <TEGRA_PIN_DISABLE>;
};
usbh-pen {
nvidia,tristate = <TEGRA_PIN_DISABLE>;
};
};
};
/* Colibri UART-A */
serial@70006000 {
status = "okay";
};
/* Colibri UART-C */
serial@70006040 {
status = "okay";
};
/* Colibri UART-B */
serial@70006300 {
status = "okay";
};
pwm@7000a000 {
status = "okay";
};
/*
* GEN1_I2C: I2C_SDA/SCL on SODIMM pin 194/196 (e.g. RTC on carrier
* board)
*/
i2c@7000c000 {
status = "okay";
clock-frequency = <400000>;
/* M41T0M6 real time clock on carrier board */
rtc@68 {
compatible = "st,m41t0";
reg = <0x68>;
};
};
/* GEN2_I2C: unused */
/* CAM_I2C (I2C3): unused */
/* DDC_CLOCK/DATA on X3 pin 15/16 (e.g. display EDID) */
i2c@7000c400 {
status = "okay";
};
/* EHCI instance 0: USB1_DP/N -> USBC_P/N */
usb@c5000000 {
status = "okay";
dr_mode = "otg";
};
usb-phy@c5000000 {
status = "okay";
vbus-supply = <&reg_usbc_vbus>;
};
/* EHCI instance 2: USB3_DP/N -> USBH_P/N */
usb@c5008000 {
status = "okay";
};
usb-phy@c5008000 {
status = "okay";
vbus-supply = <&reg_usbh_vbus>;
};
/* SPI4: Colibri SSP */
spi@7000da00 {
status = "okay";
spi-max-frequency = <25000000>;
can@0 {
compatible = "microchip,mcp2515";
reg = <0>;
clocks = <&clk16m>;
interrupt-parent = <&gpio>;
/* CAN_INT */
interrupts = <TEGRA_GPIO(A, 0) IRQ_TYPE_EDGE_FALLING>;
spi-max-frequency = <10000000>;
vdd-supply = <&reg_3v3>;
xceiver-supply = <&reg_5v0>;
};
};
/* SD/MMC */
mmc@c8000600 {
status = "okay";
bus-width = <4>;
cd-gpios = <&gpio TEGRA_GPIO(C, 7) GPIO_ACTIVE_LOW>; /* MMCD */
no-1-8-v;
};
backlight: backlight {
compatible = "pwm-backlight";
brightness-levels = <255 128 64 32 16 8 4 0>;
default-brightness-level = <6>;
/* BL_ON */
enable-gpios = <&gpio TEGRA_GPIO(T, 4) GPIO_ACTIVE_HIGH>;
power-supply = <&reg_3v3>;
pwms = <&pwm 0 5000000>; /* PWM<A> */
};
clk16m: osc3 {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <16000000>;
};
gpio-keys {
compatible = "gpio-keys";
key-wakeup {
label = "SODIMM pin 45 wakeup";
gpios = <&gpio TEGRA_GPIO(V, 3) GPIO_ACTIVE_HIGH>;
linux,code = <KEY_WAKEUP>;
debounce-interval = <10>;
wakeup-source;
};
};
panel: panel {
/*
* edt,et057090dhu: EDT 5.7" LCD TFT
* edt,et070080dh6: EDT 7.0" LCD TFT
*/
compatible = "edt,et057090dhu";
backlight = <&backlight>;
power-supply = <&reg_3v3>;
};
reg_3v3: regulator-3v3 {
compatible = "regulator-fixed";
regulator-name = "3.3V_SW";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
reg_5v0: regulator-5v0 {
compatible = "regulator-fixed";
regulator-name = "5V_SW";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
};
reg_usbc_vbus: regulator-usbc-vbus {
compatible = "regulator-fixed";
regulator-name = "VCC_USB5";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
vin-supply = <&reg_5v0>;
};
/* USBH_PEN resp. USB_P_EN */
reg_usbh_vbus: regulator-usbh-vbus {
compatible = "regulator-fixed";
regulator-name = "VCC_USB[1-4]";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
gpio = <&gpio TEGRA_GPIO(W, 2) GPIO_ACTIVE_LOW>;
vin-supply = <&reg_5v0>;
};
};