blob: f7e48941fbc70640871ade934f6bf93ef338770b [file] [log] [blame]
// SPDX-License-Identifier: GPL-2.0-only
/*
* Reset controller portions for the U8500 PRCC
* Copyright (C) 2021 Linus Walleij <linus.walleij@linaro.org>
*/
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/slab.h>
#include <linux/io.h>
#include <linux/err.h>
#include <linux/types.h>
#include <linux/reset-controller.h>
#include <linux/bits.h>
#include <linux/delay.h>
#include "prcc.h"
#include "reset-prcc.h"
#define to_u8500_prcc_reset(p) container_of((p), struct u8500_prcc_reset, rcdev)
/* This macro flattens the 2-dimensional PRCC numberspace */
#define PRCC_RESET_LINE(prcc_num, bit) \
(((prcc_num) * PRCC_PERIPHS_PER_CLUSTER) + (bit))
/*
* Reset registers in each PRCC - the reset lines are active low
* so what you need to do is write a bit for the peripheral you
* want to put into reset into the CLEAR register, this will assert
* the reset by pulling the line low. SET take the device out of
* reset. The status reflects the actual state of the line.
*/
#define PRCC_K_SOFTRST_SET 0x018
#define PRCC_K_SOFTRST_CLEAR 0x01c
#define PRCC_K_RST_STATUS 0x020
static int prcc_num_to_index(unsigned int num)
{
switch (num) {
case 1:
return CLKRST1_INDEX;
case 2:
return CLKRST2_INDEX;
case 3:
return CLKRST3_INDEX;
case 5:
return CLKRST5_INDEX;
case 6:
return CLKRST6_INDEX;
}
return -EINVAL;
}
static void __iomem *u8500_prcc_reset_base(struct u8500_prcc_reset *ur,
unsigned long id)
{
unsigned int prcc_num, index;
prcc_num = id / PRCC_PERIPHS_PER_CLUSTER;
index = prcc_num_to_index(prcc_num);
if (index >= ARRAY_SIZE(ur->base))
return NULL;
return ur->base[index];
}
static int u8500_prcc_reset(struct reset_controller_dev *rcdev,
unsigned long id)
{
struct u8500_prcc_reset *ur = to_u8500_prcc_reset(rcdev);
void __iomem *base = u8500_prcc_reset_base(ur, id);
unsigned int bit = id % PRCC_PERIPHS_PER_CLUSTER;
pr_debug("PRCC cycle reset id %lu, bit %u\n", id, bit);
/*
* Assert reset and then release it. The one microsecond
* delay is found in the vendor reference code.
*/
writel(BIT(bit), base + PRCC_K_SOFTRST_CLEAR);
udelay(1);
writel(BIT(bit), base + PRCC_K_SOFTRST_SET);
udelay(1);
return 0;
}
static int u8500_prcc_reset_assert(struct reset_controller_dev *rcdev,
unsigned long id)
{
struct u8500_prcc_reset *ur = to_u8500_prcc_reset(rcdev);
void __iomem *base = u8500_prcc_reset_base(ur, id);
unsigned int bit = id % PRCC_PERIPHS_PER_CLUSTER;
pr_debug("PRCC assert reset id %lu, bit %u\n", id, bit);
writel(BIT(bit), base + PRCC_K_SOFTRST_CLEAR);
return 0;
}
static int u8500_prcc_reset_deassert(struct reset_controller_dev *rcdev,
unsigned long id)
{
struct u8500_prcc_reset *ur = to_u8500_prcc_reset(rcdev);
void __iomem *base = u8500_prcc_reset_base(ur, id);
unsigned int bit = id % PRCC_PERIPHS_PER_CLUSTER;
pr_debug("PRCC deassert reset id %lu, bit %u\n", id, bit);
writel(BIT(bit), base + PRCC_K_SOFTRST_SET);
return 0;
}
static int u8500_prcc_reset_status(struct reset_controller_dev *rcdev,
unsigned long id)
{
struct u8500_prcc_reset *ur = to_u8500_prcc_reset(rcdev);
void __iomem *base = u8500_prcc_reset_base(ur, id);
unsigned int bit = id % PRCC_PERIPHS_PER_CLUSTER;
u32 val;
pr_debug("PRCC check status on reset line id %lu, bit %u\n", id, bit);
val = readl(base + PRCC_K_RST_STATUS);
/* Active low so return the inverse value of the bit */
return !(val & BIT(bit));
}
static const struct reset_control_ops u8500_prcc_reset_ops = {
.reset = u8500_prcc_reset,
.assert = u8500_prcc_reset_assert,
.deassert = u8500_prcc_reset_deassert,
.status = u8500_prcc_reset_status,
};
static int u8500_prcc_reset_xlate(struct reset_controller_dev *rcdev,
const struct of_phandle_args *reset_spec)
{
unsigned int prcc_num, bit;
if (reset_spec->args_count != 2)
return -EINVAL;
prcc_num = reset_spec->args[0];
bit = reset_spec->args[1];
if (prcc_num != 1 && prcc_num != 2 && prcc_num != 3 &&
prcc_num != 5 && prcc_num != 6) {
pr_err("%s: invalid PRCC %d\n", __func__, prcc_num);
return -EINVAL;
}
pr_debug("located reset line %d at PRCC %d bit %d\n",
PRCC_RESET_LINE(prcc_num, bit), prcc_num, bit);
return PRCC_RESET_LINE(prcc_num, bit);
}
void u8500_prcc_reset_init(struct device_node *np, struct u8500_prcc_reset *ur)
{
struct reset_controller_dev *rcdev = &ur->rcdev;
int ret;
int i;
for (i = 0; i < CLKRST_MAX; i++) {
ur->base[i] = ioremap(ur->phy_base[i], SZ_4K);
if (!ur->base[i])
pr_err("PRCC failed to remap for reset base %d (%08x)\n",
i, ur->phy_base[i]);
}
rcdev->owner = THIS_MODULE;
rcdev->ops = &u8500_prcc_reset_ops;
rcdev->of_node = np;
rcdev->of_reset_n_cells = 2;
rcdev->of_xlate = u8500_prcc_reset_xlate;
ret = reset_controller_register(rcdev);
if (ret)
pr_err("PRCC failed to register reset controller\n");
}