| // SPDX-License-Identifier: GPL-2.0-or-later OR MIT |
| /* |
| * Copyright 2018-2022 Toradex |
| */ |
| |
| #include "imx6ull.dtsi" |
| |
| / { |
| /* Ethernet aliases to ensure correct MAC addresses */ |
| aliases { |
| ethernet0 = &fec2; |
| ethernet1 = &fec1; |
| }; |
| |
| backlight: backlight { |
| compatible = "pwm-backlight"; |
| brightness-levels = <0 4 8 16 32 64 128 255>; |
| default-brightness-level = <6>; |
| enable-gpios = <&gpio1 11 GPIO_ACTIVE_HIGH>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_gpio_bl_on>; |
| power-supply = <®_3v3>; |
| pwms = <&pwm4 0 5000000 1>; |
| status = "okay"; |
| }; |
| |
| gpio-keys { |
| compatible = "gpio-keys"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_snvs_gpiokeys>; |
| |
| wakeup { |
| debounce-interval = <10>; |
| gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>; /* SODIMM 45 */ |
| label = "Wake-Up"; |
| linux,code = <KEY_WAKEUP>; |
| wakeup-source; |
| }; |
| }; |
| |
| panel_dpi: panel-dpi { |
| compatible = "edt,et057090dhu"; |
| backlight = <&backlight>; |
| power-supply = <®_3v3>; |
| status = "okay"; |
| |
| port { |
| lcd_panel_in: endpoint { |
| remote-endpoint = <&lcdif_out>; |
| }; |
| }; |
| }; |
| |
| reg_module_3v3: regulator-module-3v3 { |
| compatible = "regulator-fixed"; |
| regulator-always-on; |
| regulator-name = "+V3.3"; |
| regulator-min-microvolt = <3300000>; |
| regulator-max-microvolt = <3300000>; |
| }; |
| |
| reg_module_3v3_avdd: regulator-module-3v3-avdd { |
| compatible = "regulator-fixed"; |
| regulator-always-on; |
| regulator-name = "+V3.3_AVDD_AUDIO"; |
| regulator-min-microvolt = <3300000>; |
| regulator-max-microvolt = <3300000>; |
| }; |
| |
| reg_sd1_vqmmc: regulator-sd1-vqmmc { |
| compatible = "regulator-gpio"; |
| gpios = <&gpio5 9 GPIO_ACTIVE_HIGH>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_snvs_reg_sd>; |
| regulator-always-on; |
| regulator-name = "+V3.3_1.8_SD"; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <3300000>; |
| states = <1800000 0x1 3300000 0x0>; |
| vin-supply = <®_module_3v3>; |
| }; |
| |
| reg_eth_phy: regulator-eth-phy { |
| compatible = "regulator-fixed-clock"; |
| regulator-boot-on; |
| regulator-min-microvolt = <3300000>; |
| regulator-max-microvolt = <3300000>; |
| regulator-name = "+V3.3_ETH"; |
| regulator-type = "voltage"; |
| vin-supply = <®_module_3v3>; |
| clocks = <&clks IMX6UL_CLK_ENET2_REF_125M>; |
| startup-delay-us = <150000>; |
| }; |
| }; |
| |
| &adc1 { |
| vref-supply = <®_module_3v3_avdd>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_adc1>; |
| }; |
| |
| &can1 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_flexcan1>; |
| status = "disabled"; |
| }; |
| |
| &can2 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_flexcan2>; |
| status = "disabled"; |
| }; |
| |
| /* Colibri SPI */ |
| &ecspi1 { |
| cs-gpios = <&gpio3 26 GPIO_ACTIVE_LOW>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_ecspi1 &pinctrl_ecspi1_cs>; |
| }; |
| |
| /* Ethernet */ |
| &fec2 { |
| pinctrl-names = "default", "sleep"; |
| pinctrl-0 = <&pinctrl_enet2>; |
| pinctrl-1 = <&pinctrl_enet2_sleep>; |
| phy-mode = "rmii"; |
| phy-handle = <ðphy1>; |
| phy-supply = <®_eth_phy>; |
| status = "okay"; |
| |
| mdio { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| ethphy1: ethernet-phy@2 { |
| compatible = "ethernet-phy-ieee802.3-c22"; |
| max-speed = <100>; |
| reg = <2>; |
| }; |
| }; |
| }; |
| |
| /* NAND */ |
| &gpmi { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_gpmi_nand>; |
| fsl,use-minimum-ecc; |
| nand-on-flash-bbt; |
| nand-ecc-mode = "hw"; |
| nand-ecc-strength = <8>; |
| nand-ecc-step-size = <512>; |
| status = "okay"; |
| }; |
| |
| /* I2C3_SDA/SCL on SODIMM 194/196 (e.g. RTC on carrier board) */ |
| &i2c1 { |
| pinctrl-names = "default", "gpio"; |
| pinctrl-0 = <&pinctrl_i2c1>; |
| pinctrl-1 = <&pinctrl_i2c1_gpio>; |
| sda-gpios = <&gpio1 29 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; |
| scl-gpios = <&gpio1 28 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; |
| status = "okay"; |
| |
| /* Atmel maxtouch controller */ |
| atmel_mxt_ts: touchscreen@4a { |
| compatible = "atmel,maxtouch"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_atmel_conn &pinctrl_atmel_snvs_conn>; |
| reg = <0x4a>; |
| interrupt-parent = <&gpio5>; |
| interrupts = <4 IRQ_TYPE_EDGE_FALLING>; /* SODIMM 107 / INT */ |
| reset-gpios = <&gpio1 10 GPIO_ACTIVE_LOW>; /* SODIMM 106 / RST */ |
| status = "disabled"; |
| }; |
| }; |
| |
| /* |
| * PWR_I2C: power I2C to audio codec, PMIC, temperature sensor and |
| * touch screen controller |
| */ |
| &i2c2 { |
| /* Use low frequency to compensate for the high pull-up values. */ |
| clock-frequency = <40000>; |
| pinctrl-names = "default", "gpio"; |
| pinctrl-0 = <&pinctrl_i2c2>; |
| pinctrl-1 = <&pinctrl_i2c2_gpio>; |
| sda-gpios = <&gpio1 31 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; |
| scl-gpios = <&gpio1 30 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; |
| status = "okay"; |
| |
| ad7879_ts: touchscreen@2c { |
| compatible = "adi,ad7879-1"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_snvs_ad7879_int>; |
| reg = <0x2c>; |
| interrupt-parent = <&gpio5>; |
| interrupts = <7 IRQ_TYPE_EDGE_FALLING>; |
| touchscreen-max-pressure = <4096>; |
| adi,resistance-plate-x = <120>; |
| adi,first-conversion-delay = /bits/ 8 <3>; |
| adi,acquisition-time = /bits/ 8 <1>; |
| adi,median-filter-size = /bits/ 8 <2>; |
| adi,averaging = /bits/ 8 <1>; |
| adi,conversion-interval = /bits/ 8 <255>; |
| }; |
| }; |
| |
| &lcdif { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_lcdif_dat |
| &pinctrl_lcdif_ctrl>; |
| |
| port { |
| lcdif_out: endpoint { |
| remote-endpoint = <&lcd_panel_in>; |
| }; |
| }; |
| }; |
| |
| /* PWM <A> */ |
| &pwm4 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_pwm4>; |
| }; |
| |
| /* PWM <B> */ |
| &pwm5 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_pwm5>; |
| }; |
| |
| /* PWM <C> */ |
| &pwm6 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_pwm6>; |
| }; |
| |
| /* PWM <D> */ |
| &pwm7 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_pwm7>; |
| }; |
| |
| &sdma { |
| status = "okay"; |
| }; |
| |
| &snvs_pwrkey { |
| status = "disabled"; |
| }; |
| |
| /* Colibri UART_A */ |
| &uart1 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_uart1 &pinctrl_uart1_ctrl1>; |
| uart-has-rtscts; |
| fsl,dte-mode; |
| }; |
| |
| /* Colibri UART_B */ |
| &uart2 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_uart2>; |
| uart-has-rtscts; |
| fsl,dte-mode; |
| }; |
| |
| /* Colibri UART_C */ |
| &uart5 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_uart5>; |
| fsl,dte-mode; |
| }; |
| |
| /* Colibri USBC */ |
| &usbotg1 { |
| dr_mode = "otg"; |
| srp-disable; |
| hnp-disable; |
| adp-disable; |
| }; |
| |
| /* Colibri USBH */ |
| &usbotg2 { |
| dr_mode = "host"; |
| }; |
| |
| /* Colibri MMC/SD */ |
| &usdhc1 { |
| pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep"; |
| pinctrl-0 = <&pinctrl_usdhc1 &pinctrl_snvs_usdhc1_cd>; |
| pinctrl-1 = <&pinctrl_usdhc1_100mhz &pinctrl_snvs_usdhc1_cd>; |
| pinctrl-2 = <&pinctrl_usdhc1_200mhz &pinctrl_snvs_usdhc1_cd>; |
| pinctrl-3 = <&pinctrl_usdhc1 &pinctrl_snvs_usdhc1_cd_sleep>; |
| assigned-clocks = <&clks IMX6UL_CLK_USDHC1_SEL>, <&clks IMX6UL_CLK_USDHC1>; |
| assigned-clock-parents = <&clks IMX6UL_CLK_PLL2_PFD2>; |
| assigned-clock-rates = <0>, <198000000>; |
| bus-width = <4>; |
| cd-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>; /* MMC_CD */ |
| disable-wp; |
| keep-power-in-suspend; |
| no-1-8-v; |
| vqmmc-supply = <®_sd1_vqmmc>; |
| wakeup-source; |
| }; |
| |
| &wdog1 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_wdog>; |
| fsl,ext-reset-output; |
| }; |
| |
| &iomuxc { |
| pinctrl_adc1: adc1grp { |
| fsl,pins = < |
| MX6UL_PAD_GPIO1_IO00__GPIO1_IO00 0x3000 /* SODIMM 8 */ |
| MX6UL_PAD_GPIO1_IO01__GPIO1_IO01 0x3000 /* SODIMM 6 */ |
| MX6UL_PAD_GPIO1_IO08__GPIO1_IO08 0x3000 /* SODIMM 4 */ |
| MX6UL_PAD_GPIO1_IO09__GPIO1_IO09 0x3000 /* SODIMM 2 */ |
| >; |
| }; |
| |
| pinctrl_atmel_adap: atmeladapgrp { |
| fsl,pins = < |
| MX6UL_PAD_NAND_DQS__GPIO4_IO16 0xb0a0 /* SODIMM 28 */ |
| MX6UL_PAD_ENET1_TX_EN__GPIO2_IO05 0xb0a0 /* SODIMM 30 */ |
| >; |
| }; |
| |
| pinctrl_atmel_conn: atmelconngrp { |
| fsl,pins = < |
| MX6UL_PAD_JTAG_MOD__GPIO1_IO10 0xb0a0 /* SODIMM 106 */ |
| >; |
| }; |
| |
| pinctrl_can_int: canintgrp { |
| fsl,pins = < |
| MX6UL_PAD_ENET1_TX_DATA1__GPIO2_IO04 0x13010 /* SODIMM 73 */ |
| >; |
| }; |
| |
| pinctrl_enet2: enet2grp { |
| fsl,pins = < |
| MX6UL_PAD_GPIO1_IO06__ENET2_MDIO 0x1b0b0 |
| MX6UL_PAD_GPIO1_IO07__ENET2_MDC 0x1b0b0 |
| MX6UL_PAD_ENET2_RX_DATA0__ENET2_RDATA00 0x1b0b0 |
| MX6UL_PAD_ENET2_RX_DATA1__ENET2_RDATA01 0x1b0b0 |
| MX6UL_PAD_ENET2_RX_EN__ENET2_RX_EN 0x1b0b0 |
| MX6UL_PAD_ENET2_RX_ER__ENET2_RX_ER 0x1b0b0 |
| MX6UL_PAD_ENET2_TX_CLK__ENET2_REF_CLK2 0x4001b031 |
| MX6UL_PAD_ENET2_TX_DATA0__ENET2_TDATA00 0x1b0b0 |
| MX6UL_PAD_ENET2_TX_DATA1__ENET2_TDATA01 0x1b0b0 |
| MX6UL_PAD_ENET2_TX_EN__ENET2_TX_EN 0x1b0b0 |
| >; |
| }; |
| |
| pinctrl_enet2_sleep: enet2-sleepgrp { |
| fsl,pins = < |
| MX6UL_PAD_GPIO1_IO06__GPIO1_IO06 0x0 |
| MX6UL_PAD_GPIO1_IO07__GPIO1_IO07 0x0 |
| MX6UL_PAD_ENET2_RX_DATA0__GPIO2_IO08 0x0 |
| MX6UL_PAD_ENET2_RX_DATA1__GPIO2_IO09 0x0 |
| MX6UL_PAD_ENET2_RX_EN__GPIO2_IO10 0x0 |
| MX6UL_PAD_ENET2_RX_ER__GPIO2_IO15 0x0 |
| MX6UL_PAD_ENET2_TX_CLK__ENET2_REF_CLK2 0x4001b031 |
| MX6UL_PAD_ENET2_TX_DATA0__GPIO2_IO11 0x0 |
| MX6UL_PAD_ENET2_TX_DATA1__GPIO2_IO12 0x0 |
| MX6UL_PAD_ENET2_TX_EN__GPIO2_IO13 0x0 |
| >; |
| }; |
| |
| pinctrl_ecspi1_cs: ecspi1csgrp { |
| fsl,pins = < |
| MX6UL_PAD_LCD_DATA21__GPIO3_IO26 0x70a0 /* SODIMM 86 */ |
| >; |
| }; |
| |
| pinctrl_ecspi1: ecspi1grp { |
| fsl,pins = < |
| MX6UL_PAD_LCD_DATA20__ECSPI1_SCLK 0x000a0 /* SODIMM 88 */ |
| MX6UL_PAD_LCD_DATA22__ECSPI1_MOSI 0x000a0 /* SODIMM 92 */ |
| MX6UL_PAD_LCD_DATA23__ECSPI1_MISO 0x100a0 /* SODIMM 90 */ |
| >; |
| }; |
| |
| pinctrl_flexcan1: flexcan1grp { |
| fsl,pins = < |
| MX6UL_PAD_ENET1_RX_DATA0__FLEXCAN1_TX 0x1b020 |
| MX6UL_PAD_ENET1_RX_DATA1__FLEXCAN1_RX 0x1b020 |
| >; |
| }; |
| |
| pinctrl_flexcan2: flexcan2grp { |
| fsl,pins = < |
| MX6UL_PAD_ENET1_TX_DATA0__FLEXCAN2_RX 0x1b020 |
| MX6UL_PAD_ENET1_RX_EN__FLEXCAN2_TX 0x1b020 |
| >; |
| }; |
| |
| pinctrl_gpio_bl_on: gpioblongrp { |
| fsl,pins = < |
| MX6UL_PAD_JTAG_TMS__GPIO1_IO11 0x30a0 /* SODIMM 71 */ |
| >; |
| }; |
| |
| pinctrl_gpio1: gpio1grp { |
| fsl,pins = < |
| MX6UL_PAD_UART3_RX_DATA__GPIO1_IO25 0x10b0 /* SODIMM 77 */ |
| MX6UL_PAD_JTAG_TCK__GPIO1_IO14 0x70a0 /* SODIMM 99 */ |
| MX6UL_PAD_NAND_CE1_B__GPIO4_IO14 0x10b0 /* SODIMM 133 */ |
| MX6UL_PAD_UART3_TX_DATA__GPIO1_IO24 0x10b0 /* SODIMM 135 */ |
| MX6UL_PAD_UART3_CTS_B__GPIO1_IO26 0x10b0 /* SODIMM 100 */ |
| MX6UL_PAD_JTAG_TRST_B__GPIO1_IO15 0x70a0 /* SODIMM 102 */ |
| MX6UL_PAD_ENET1_RX_ER__GPIO2_IO07 0x10b0 /* SODIMM 104 */ |
| MX6UL_PAD_UART3_RTS_B__GPIO1_IO27 0x10b0 /* SODIMM 186 */ |
| >; |
| }; |
| |
| pinctrl_gpio2: gpio2grp { /* Camera */ |
| fsl,pins = < |
| MX6UL_PAD_CSI_DATA04__GPIO4_IO25 0x10b0 /* SODIMM 69 */ |
| MX6UL_PAD_CSI_MCLK__GPIO4_IO17 0x10b0 /* SODIMM 75 */ |
| MX6UL_PAD_CSI_DATA06__GPIO4_IO27 0x10b0 /* SODIMM 85 */ |
| MX6UL_PAD_CSI_PIXCLK__GPIO4_IO18 0x10b0 /* SODIMM 96 */ |
| MX6UL_PAD_CSI_DATA05__GPIO4_IO26 0x10b0 /* SODIMM 98 */ |
| >; |
| }; |
| |
| pinctrl_gpio3: gpio3grp { /* CAN2 */ |
| fsl,pins = < |
| MX6UL_PAD_ENET1_RX_EN__GPIO2_IO02 0x10b0 /* SODIMM 178 */ |
| MX6UL_PAD_ENET1_TX_DATA0__GPIO2_IO03 0x10b0 /* SODIMM 188 */ |
| >; |
| }; |
| |
| pinctrl_gpio4: gpio4grp { |
| fsl,pins = < |
| MX6UL_PAD_CSI_DATA07__GPIO4_IO28 0x10b0 /* SODIMM 65 */ |
| >; |
| }; |
| |
| pinctrl_gpio6: gpio6grp { /* Wifi pins */ |
| fsl,pins = < |
| MX6UL_PAD_GPIO1_IO03__GPIO1_IO03 0x10b0 /* SODIMM 89 */ |
| MX6UL_PAD_CSI_DATA02__GPIO4_IO23 0x10b0 /* SODIMM 79 */ |
| MX6UL_PAD_CSI_VSYNC__GPIO4_IO19 0x10b0 /* SODIMM 81 */ |
| MX6UL_PAD_CSI_DATA03__GPIO4_IO24 0x10b0 /* SODIMM 97 */ |
| MX6UL_PAD_CSI_DATA00__GPIO4_IO21 0x10b0 /* SODIMM 101 */ |
| MX6UL_PAD_CSI_DATA01__GPIO4_IO22 0x10b0 /* SODIMM 103 */ |
| MX6UL_PAD_CSI_HSYNC__GPIO4_IO20 0x10b0 /* SODIMM 94 */ |
| >; |
| }; |
| |
| pinctrl_gpio7: gpio7grp { /* CAN1 */ |
| fsl,pins = < |
| MX6UL_PAD_ENET1_RX_DATA0__GPIO2_IO00 0xb0b0/* SODIMM 55 */ |
| MX6UL_PAD_ENET1_RX_DATA1__GPIO2_IO01 0xb0b0 /* SODIMM 63 */ |
| >; |
| }; |
| |
| /* |
| * With an eMMC instead of a raw NAND device the following pins |
| * are available at SODIMM pins. |
| */ |
| pinctrl_gpmi_gpio: gpmigpiogrp { |
| fsl,pins = < |
| MX6UL_PAD_NAND_ALE__GPIO4_IO10 0x10b0 /* SODIMM 140 */ |
| MX6UL_PAD_NAND_CE0_B__GPIO4_IO13 0x10b0 /* SODIMM 144 */ |
| MX6UL_PAD_NAND_CLE__GPIO4_IO15 0x10b0 /* SODIMM 146 */ |
| MX6UL_PAD_NAND_READY_B__GPIO4_IO12 0x10b0 /* SODIMM 142 */ |
| >; |
| }; |
| |
| pinctrl_gpmi_nand: gpminandgrp { |
| fsl,pins = < |
| MX6UL_PAD_NAND_DATA00__RAWNAND_DATA00 0x100a9 |
| MX6UL_PAD_NAND_DATA01__RAWNAND_DATA01 0x100a9 |
| MX6UL_PAD_NAND_DATA02__RAWNAND_DATA02 0x100a9 |
| MX6UL_PAD_NAND_DATA03__RAWNAND_DATA03 0x100a9 |
| MX6UL_PAD_NAND_DATA04__RAWNAND_DATA04 0x100a9 |
| MX6UL_PAD_NAND_DATA05__RAWNAND_DATA05 0x100a9 |
| MX6UL_PAD_NAND_DATA06__RAWNAND_DATA06 0x100a9 |
| MX6UL_PAD_NAND_DATA07__RAWNAND_DATA07 0x100a9 |
| MX6UL_PAD_NAND_CLE__RAWNAND_CLE 0x100a9 |
| MX6UL_PAD_NAND_ALE__RAWNAND_ALE 0x100a9 |
| MX6UL_PAD_NAND_RE_B__RAWNAND_RE_B 0x100a9 |
| MX6UL_PAD_NAND_WE_B__RAWNAND_WE_B 0x100a9 |
| MX6UL_PAD_NAND_CE0_B__RAWNAND_CE0_B 0x100a9 |
| MX6UL_PAD_NAND_READY_B__RAWNAND_READY_B 0x100a9 |
| >; |
| }; |
| |
| pinctrl_i2c1: i2c1grp { |
| fsl,pins = < |
| MX6UL_PAD_UART4_TX_DATA__I2C1_SCL 0x4001b8b0 /* SODIMM 196 */ |
| MX6UL_PAD_UART4_RX_DATA__I2C1_SDA 0x4001b8b0 /* SODIMM 194 */ |
| >; |
| }; |
| |
| pinctrl_i2c1_gpio: i2c1-gpiogrp { |
| fsl,pins = < |
| MX6UL_PAD_UART4_TX_DATA__GPIO1_IO28 0x4001b8b0 /* SODIMM 196 */ |
| MX6UL_PAD_UART4_RX_DATA__GPIO1_IO29 0x4001b8b0 /* SODIMM 194 */ |
| >; |
| }; |
| |
| pinctrl_i2c2: i2c2grp { |
| fsl,pins = < |
| MX6UL_PAD_UART5_TX_DATA__I2C2_SCL 0x4001f8b0 |
| MX6UL_PAD_UART5_RX_DATA__I2C2_SDA 0x4001f8b0 |
| >; |
| }; |
| |
| pinctrl_i2c2_gpio: i2c2-gpiogrp { |
| fsl,pins = < |
| MX6UL_PAD_UART5_TX_DATA__GPIO1_IO30 0x4001f8b0 |
| MX6UL_PAD_UART5_RX_DATA__GPIO1_IO31 0x4001f8b0 |
| >; |
| }; |
| |
| pinctrl_lcdif_dat: lcdifdatgrp { |
| fsl,pins = < |
| MX6UL_PAD_LCD_DATA00__LCDIF_DATA00 0x00079 /* SODIMM 76 */ |
| MX6UL_PAD_LCD_DATA01__LCDIF_DATA01 0x00079 /* SODIMM 70 */ |
| MX6UL_PAD_LCD_DATA02__LCDIF_DATA02 0x00079 /* SODIMM 60 */ |
| MX6UL_PAD_LCD_DATA03__LCDIF_DATA03 0x00079 /* SODIMM 58 */ |
| MX6UL_PAD_LCD_DATA04__LCDIF_DATA04 0x00079 /* SODIMM 78 */ |
| MX6UL_PAD_LCD_DATA05__LCDIF_DATA05 0x00079 /* SODIMM 72 */ |
| MX6UL_PAD_LCD_DATA06__LCDIF_DATA06 0x00079 /* SODIMM 80 */ |
| MX6UL_PAD_LCD_DATA07__LCDIF_DATA07 0x00079 /* SODIMM 46 */ |
| MX6UL_PAD_LCD_DATA08__LCDIF_DATA08 0x00079 /* SODIMM 62 */ |
| MX6UL_PAD_LCD_DATA09__LCDIF_DATA09 0x00079 /* SODIMM 48 */ |
| MX6UL_PAD_LCD_DATA10__LCDIF_DATA10 0x00079 /* SODIMM 74 */ |
| MX6UL_PAD_LCD_DATA11__LCDIF_DATA11 0x00079 /* SODIMM 50 */ |
| MX6UL_PAD_LCD_DATA12__LCDIF_DATA12 0x00079 /* SODIMM 52 */ |
| MX6UL_PAD_LCD_DATA13__LCDIF_DATA13 0x00079 /* SODIMM 54 */ |
| MX6UL_PAD_LCD_DATA14__LCDIF_DATA14 0x00079 /* SODIMM 66 */ |
| MX6UL_PAD_LCD_DATA15__LCDIF_DATA15 0x00079 /* SODIMM 64 */ |
| MX6UL_PAD_LCD_DATA16__LCDIF_DATA16 0x00079 /* SODIMM 57 */ |
| MX6UL_PAD_LCD_DATA17__LCDIF_DATA17 0x00079 /* SODIMM 61 */ |
| >; |
| }; |
| |
| pinctrl_lcdif_ctrl: lcdifctrlgrp { |
| fsl,pins = < |
| MX6UL_PAD_LCD_CLK__LCDIF_CLK 0x00079 /* SODIMM 56 */ |
| MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE 0x00079 /* SODIMM 44 */ |
| MX6UL_PAD_LCD_HSYNC__LCDIF_HSYNC 0x00079 /* SODIMM 68 */ |
| MX6UL_PAD_LCD_VSYNC__LCDIF_VSYNC 0x00079 /* SODIMM 82 */ |
| >; |
| }; |
| |
| pinctrl_pwm4: pwm4grp { |
| fsl,pins = < |
| MX6UL_PAD_NAND_WP_B__PWM4_OUT 0x00079 /* SODIMM 59 */ |
| >; |
| }; |
| |
| pinctrl_pwm5: pwm5grp { |
| fsl,pins = < |
| MX6UL_PAD_NAND_DQS__PWM5_OUT 0x00079 /* SODIMM 28 */ |
| >; |
| }; |
| |
| pinctrl_pwm6: pwm6grp { |
| fsl,pins = < |
| MX6UL_PAD_ENET1_TX_EN__PWM6_OUT 0x00079 /* SODIMM 30 */ |
| >; |
| }; |
| |
| pinctrl_pwm7: pwm7grp { |
| fsl,pins = < |
| MX6UL_PAD_ENET1_TX_CLK__PWM7_OUT 0x00079 /* SODIMM 67 */ |
| >; |
| }; |
| |
| pinctrl_uart1: uart1grp { |
| fsl,pins = < |
| MX6UL_PAD_UART1_TX_DATA__UART1_DTE_RX 0x1b0b1 /* SODIMM 33 */ |
| MX6UL_PAD_UART1_RX_DATA__UART1_DTE_TX 0x1b0b1 /* SODIMM 35 */ |
| MX6UL_PAD_UART1_RTS_B__UART1_DTE_CTS 0x1b0b1 /* SODIMM 27 */ |
| MX6UL_PAD_UART1_CTS_B__UART1_DTE_RTS 0x1b0b1 /* SODIMM 25 */ |
| >; |
| }; |
| |
| pinctrl_uart1_ctrl1: uart1ctrl1grp { /* Additional DTR, DCD */ |
| fsl,pins = < |
| MX6UL_PAD_JTAG_TDI__GPIO1_IO13 0x70a0 /* SODIMM 31 / DCD */ |
| MX6UL_PAD_LCD_DATA18__GPIO3_IO23 0x10b0 /* SODIMM 29 / DSR */ |
| MX6UL_PAD_JTAG_TDO__GPIO1_IO12 0x90b1 /* SODIMM 23 / DTR */ |
| MX6UL_PAD_LCD_DATA19__GPIO3_IO24 0x10b0 /* SODIMM 37 / RI */ |
| >; |
| }; |
| |
| pinctrl_uart2: uart2grp { |
| fsl,pins = < |
| MX6UL_PAD_UART2_TX_DATA__UART2_DTE_RX 0x1b0b1 /* SODIMM 36 */ |
| MX6UL_PAD_UART2_RX_DATA__UART2_DTE_TX 0x1b0b1 /* SODIMM 38 */ |
| MX6UL_PAD_UART2_CTS_B__UART2_DTE_RTS 0x1b0b1 /* SODIMM 32 */ |
| MX6UL_PAD_UART2_RTS_B__UART2_DTE_CTS 0x1b0b1 /* SODIMM 34 */ |
| >; |
| }; |
| pinctrl_uart5: uart5grp { |
| fsl,pins = < |
| MX6UL_PAD_GPIO1_IO04__UART5_DTE_RX 0x1b0b1 /* SODIMM 19 */ |
| MX6UL_PAD_GPIO1_IO05__UART5_DTE_TX 0x1b0b1 /* SODIMM 21 */ |
| >; |
| }; |
| |
| pinctrl_usbh_reg: usbhreggrp { |
| fsl,pins = < |
| MX6UL_PAD_GPIO1_IO02__GPIO1_IO02 0x10b0 /* SODIMM 129 / USBH_PEN */ |
| >; |
| }; |
| |
| pinctrl_usdhc1: usdhc1grp { |
| fsl,pins = < |
| MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x10059 /* SODIMM 47 */ |
| MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x17059 /* SODIMM 190 */ |
| MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x17059 /* SODIMM 192 */ |
| MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x17059 /* SODIMM 49 */ |
| MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x17059 /* SODIMM 51 */ |
| MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x17059 /* SODIMM 53 */ |
| >; |
| }; |
| |
| pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp { |
| fsl,pins = < |
| MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x100b9 |
| MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x170b9 |
| MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x170b9 |
| MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x170b9 |
| MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x170b9 |
| MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x170b9 |
| >; |
| }; |
| |
| pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp { |
| fsl,pins = < |
| MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x100f9 |
| MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x170f9 |
| MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x170f9 |
| MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x170f9 |
| MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x170f9 |
| MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x170f9 |
| >; |
| }; |
| |
| pinctrl_usdhc2: usdhc2grp { |
| fsl,pins = < |
| MX6UL_PAD_CSI_DATA00__USDHC2_DATA0 0x17069 |
| MX6UL_PAD_CSI_DATA01__USDHC2_DATA1 0x17069 |
| MX6UL_PAD_CSI_DATA02__USDHC2_DATA2 0x17069 |
| MX6UL_PAD_CSI_DATA03__USDHC2_DATA3 0x17069 |
| MX6UL_PAD_CSI_HSYNC__USDHC2_CMD 0x17069 |
| MX6UL_PAD_CSI_VSYNC__USDHC2_CLK 0x10069 |
| |
| MX6UL_PAD_GPIO1_IO03__OSC32K_32K_OUT 0x10 |
| >; |
| }; |
| |
| pinctrl_usdhc2emmc: usdhc2emmcgrp { |
| fsl,pins = < |
| MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x17059 |
| MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x17059 |
| MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x17059 |
| MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x17059 |
| MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x17059 |
| MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x17059 |
| MX6UL_PAD_NAND_DATA04__USDHC2_DATA4 0x17059 |
| MX6UL_PAD_NAND_DATA05__USDHC2_DATA5 0x17059 |
| MX6UL_PAD_NAND_DATA06__USDHC2_DATA6 0x17059 |
| MX6UL_PAD_NAND_DATA07__USDHC2_DATA7 0x17059 |
| >; |
| }; |
| |
| pinctrl_wdog: wdoggrp { |
| fsl,pins = < |
| MX6UL_PAD_LCD_RESET__WDOG1_WDOG_ANY 0x30b0 |
| >; |
| }; |
| }; |
| |
| &iomuxc_snvs { |
| pinctrl_atmel_snvs_conn: atmelsnvsconngrp { |
| fsl,pins = < |
| MX6ULL_PAD_SNVS_TAMPER4__GPIO5_IO04 0xb0a0 /* SODIMM 107 */ |
| >; |
| }; |
| |
| pinctrl_snvs_gpio1: snvsgpio1grp { |
| fsl,pins = < |
| MX6ULL_PAD_SNVS_TAMPER6__GPIO5_IO06 0x110a0 /* SODIMM 93 */ |
| MX6ULL_PAD_SNVS_TAMPER3__GPIO5_IO03 0x110a0 /* SODIMM 95 */ |
| MX6ULL_PAD_BOOT_MODE0__GPIO5_IO10 0x1b0a0 /* SODIMM 105 */ |
| MX6ULL_PAD_SNVS_TAMPER5__GPIO5_IO05 0x0b0a0 /* SODIMM 131 / USBH_OC */ |
| MX6ULL_PAD_SNVS_TAMPER8__GPIO5_IO08 0x110a0 /* SODIMM 138 */ |
| >; |
| }; |
| |
| pinctrl_snvs_gpio3: snvsgpio3grp { /* Wifi pins */ |
| fsl,pins = < |
| MX6ULL_PAD_BOOT_MODE1__GPIO5_IO11 0x130a0 /* SODIMM 127 */ |
| >; |
| }; |
| |
| pinctrl_snvs_ad7879_int: snvsad7879intgrp { /* TOUCH Interrupt */ |
| fsl,pins = < |
| MX6ULL_PAD_SNVS_TAMPER7__GPIO5_IO07 0x100b0 |
| >; |
| }; |
| |
| pinctrl_snvs_reg_sd: snvsregsdgrp { |
| fsl,pins = < |
| MX6ULL_PAD_SNVS_TAMPER9__GPIO5_IO09 0x400100b0 |
| >; |
| }; |
| |
| pinctrl_snvs_usbc_det: snvsusbcdetgrp { |
| fsl,pins = < |
| MX6ULL_PAD_SNVS_TAMPER2__GPIO5_IO02 0x130b0 |
| >; |
| }; |
| |
| pinctrl_snvs_gpiokeys: snvsgpiokeysgrp { |
| fsl,pins = < |
| MX6ULL_PAD_SNVS_TAMPER1__GPIO5_IO01 0x130a0 /* SODIMM 45 / WAKE_UP */ |
| >; |
| }; |
| |
| pinctrl_snvs_usdhc1_cd: snvsusdhc1cdgrp { |
| fsl,pins = < |
| MX6ULL_PAD_SNVS_TAMPER0__GPIO5_IO00 0x1b0a0 /* SODIMM 43 / MMC_CD */ |
| >; |
| }; |
| |
| pinctrl_snvs_usdhc1_cd_sleep: snvsusdhc1cd-sleepgrp { |
| fsl,pins = < |
| MX6ULL_PAD_SNVS_TAMPER0__GPIO5_IO00 0x0 |
| >; |
| }; |
| |
| pinctrl_snvs_wifi_pdn: snvswifipdngrp { |
| fsl,pins = < |
| MX6ULL_PAD_BOOT_MODE1__GPIO5_IO11 0x130a0 |
| >; |
| }; |
| }; |
