blob: c9f04999c9cf7da8190ee971f5c414b32b3b3d50 [file] [log] [blame]
# SPDX-License-Identifier: GPL-2.0
%YAML 1.2
---
$id: http://devicetree.org/schemas/pci/hisilicon,kirin-pcie.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: HiSilicon Kirin SoCs PCIe host DT description
maintainers:
- Xiaowei Song <songxiaowei@hisilicon.com>
- Binghui Wang <wangbinghui@hisilicon.com>
description: |
Kirin PCIe host controller is based on the Synopsys DesignWare PCI core.
It shares common functions with the PCIe DesignWare core driver and
inherits common properties defined in
Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml.
allOf:
- $ref: /schemas/pci/snps,dw-pcie.yaml#
properties:
compatible:
contains:
enum:
- hisilicon,kirin960-pcie
- hisilicon,kirin970-pcie
reg:
description: |
Should contain dbi, apb, config registers location and length.
For hisilicon,kirin960-pcie, it should also contain phy.
minItems: 3
maxItems: 4
reg-names:
minItems: 3
maxItems: 4
clocks: true
clock-names:
items:
- const: pcie_phy_ref
- const: pcie_aux
- const: pcie_apb_phy
- const: pcie_apb_sys
- const: pcie_aclk
phys:
maxItems: 1
hisilicon,clken-gpios:
description: |
Clock input enablement GPIOs from PCI devices like Ethernet, M.2 and
mini-PCIe slots.
required:
- compatible
- reg
- reg-names
unevaluatedProperties: false
examples:
- |
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/clock/hi3660-clock.h>
#include <dt-bindings/clock/hi3670-clock.h>
soc {
#address-cells = <2>;
#size-cells = <2>;
pcie@f4000000 {
compatible = "hisilicon,kirin960-pcie";
reg = <0x0 0xf4000000 0x0 0x1000>,
<0x0 0xff3fe000 0x0 0x1000>,
<0x0 0xf3f20000 0x0 0x40000>,
<0x0 0xf5000000 0x0 0x2000>;
reg-names = "dbi", "apb", "phy", "config";
bus-range = <0x0 0xff>;
#address-cells = <3>;
#size-cells = <2>;
device_type = "pci";
ranges = <0x02000000 0x0 0x00000000
0x0 0xf6000000
0x0 0x02000000>;
num-lanes = <1>;
#interrupt-cells = <1>;
interrupts = <0 283 4>;
interrupt-names = "msi";
interrupt-map-mask = <0xf800 0 0 7>;
interrupt-map = <0x0 0 0 1 &gic GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>,
<0x0 0 0 2 &gic GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>,
<0x0 0 0 3 &gic GIC_SPI 284 IRQ_TYPE_LEVEL_HIGH>,
<0x0 0 0 4 &gic GIC_SPI 285 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&crg_ctrl HI3660_PCIEPHY_REF>,
<&crg_ctrl HI3660_CLK_GATE_PCIEAUX>,
<&crg_ctrl HI3660_PCLK_GATE_PCIE_PHY>,
<&crg_ctrl HI3660_PCLK_GATE_PCIE_SYS>,
<&crg_ctrl HI3660_ACLK_GATE_PCIE>;
clock-names = "pcie_phy_ref", "pcie_aux", "pcie_apb_phy",
"pcie_apb_sys", "pcie_aclk";
};
pcie@f5000000 {
compatible = "hisilicon,kirin970-pcie";
reg = <0x0 0xf4000000 0x0 0x1000000>,
<0x0 0xfc180000 0x0 0x1000>,
<0x0 0xf5000000 0x0 0x2000>;
reg-names = "dbi", "apb", "config";
bus-range = <0x0 0xff>;
#address-cells = <3>;
#size-cells = <2>;
device_type = "pci";
phys = <&pcie_phy>;
ranges = <0x02000000 0x0 0x00000000
0x0 0xf6000000
0x0 0x02000000>;
num-lanes = <1>;
#interrupt-cells = <1>;
interrupts = <GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "msi";
interrupt-map-mask = <0 0 0 7>;
interrupt-map = <0x0 0 0 1 &gic GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>,
<0x0 0 0 2 &gic GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>,
<0x0 0 0 3 &gic GIC_SPI 284 IRQ_TYPE_LEVEL_HIGH>,
<0x0 0 0 4 &gic GIC_SPI 285 IRQ_TYPE_LEVEL_HIGH>;
reset-gpios = <&gpio7 0 0>;
hisilicon,clken-gpios = <&gpio27 3 0>, <&gpio17 0 0>, <&gpio20 6 0>;
pcie@0,0 { // Lane 0: PCIe switch: Bus 1, Device 0
reg = <0 0 0 0 0>;
compatible = "pciclass,0604";
device_type = "pci";
#address-cells = <3>;
#size-cells = <2>;
ranges;
pcie@0,0 { // Lane 0: upstream
reg = <0 0 0 0 0>;
compatible = "pciclass,0604";
device_type = "pci";
#address-cells = <3>;
#size-cells = <2>;
ranges;
pcie@1,0 { // Lane 4: M.2
reg = <0x0800 0 0 0 0>;
compatible = "pciclass,0604";
device_type = "pci";
reset-gpios = <&gpio3 1 0>;
#address-cells = <3>;
#size-cells = <2>;
ranges;
};
pcie@5,0 { // Lane 5: Mini PCIe
reg = <0x2800 0 0 0 0>;
compatible = "pciclass,0604";
device_type = "pci";
reset-gpios = <&gpio27 4 0 >;
#address-cells = <3>;
#size-cells = <2>;
ranges;
};
pcie@7,0 { // Lane 6: Ethernet
reg = <0x03800 0 0 0 0>;
compatible = "pciclass,0604";
device_type = "pci";
reset-gpios = <&gpio25 2 0 >;
#address-cells = <3>;
#size-cells = <2>;
ranges;
};
};
};
};
};