blob: a98940e6424327fe5a5232dc0613404c5c559ae4 [file] [log] [blame]
# SPDX-License-Identifier: GPL-2.0
config PARISC
def_bool y
select ALTERNATE_USER_ADDRESS_SPACE
select ARCH_32BIT_OFF_T if !64BIT
select ARCH_MIGHT_HAVE_PC_PARPORT
select HAVE_FUNCTION_TRACER
select HAVE_FUNCTION_GRAPH_TRACER
select HAVE_SYSCALL_TRACEPOINTS
select ARCH_WANT_FRAME_POINTERS
select ARCH_HAS_ELF_RANDOMIZE
select ARCH_HAS_STRICT_KERNEL_RWX
select ARCH_HAS_STRICT_MODULE_RWX
select ARCH_HAS_UBSAN_SANITIZE_ALL
select ARCH_HAS_PTE_SPECIAL
select ARCH_NO_SG_CHAIN
select ARCH_SUPPORTS_HUGETLBFS if PA20
select ARCH_SUPPORTS_MEMORY_FAILURE
select ARCH_STACKWALK
select ARCH_HAS_DEBUG_VM_PGTABLE
select HAVE_RELIABLE_STACKTRACE
select DMA_OPS
select RTC_CLASS
select RTC_DRV_GENERIC
select INIT_ALL_POSSIBLE
select BUG
select BUILDTIME_TABLE_SORT
select HAVE_PCI
select HAVE_PERF_EVENTS
select HAVE_KERNEL_BZIP2
select HAVE_KERNEL_GZIP
select HAVE_KERNEL_LZ4
select HAVE_KERNEL_LZMA
select HAVE_KERNEL_LZO
select HAVE_KERNEL_XZ
select GENERIC_ATOMIC64 if !64BIT
select GENERIC_IRQ_PROBE
select GENERIC_PCI_IOMAP
select ARCH_HAVE_NMI_SAFE_CMPXCHG
select GENERIC_SMP_IDLE_THREAD
select GENERIC_ARCH_TOPOLOGY if SMP
select GENERIC_CPU_DEVICES if !SMP
select GENERIC_LIB_DEVMEM_IS_ALLOWED
select SYSCTL_ARCH_UNALIGN_ALLOW
select SYSCTL_EXCEPTION_TRACE
select HAVE_MOD_ARCH_SPECIFIC
select MODULES_USE_ELF_RELA
select CLONE_BACKWARDS
select TTY # Needed for pdc_cons.c
select HAVE_DEBUG_STACKOVERFLOW
select HAVE_ARCH_AUDITSYSCALL
select HAVE_ARCH_HASH
select HAVE_ARCH_JUMP_LABEL
select HAVE_ARCH_JUMP_LABEL_RELATIVE
select HAVE_ARCH_KFENCE
select HAVE_ARCH_SECCOMP_FILTER
select HAVE_ARCH_TRACEHOOK
select HAVE_REGS_AND_STACK_ACCESS_API
select GENERIC_SCHED_CLOCK
select GENERIC_IRQ_MIGRATION if SMP
select HAVE_UNSTABLE_SCHED_CLOCK if SMP
select LEGACY_TIMER_TICK
select CPU_NO_EFFICIENT_FFS
select THREAD_INFO_IN_TASK
select NEED_DMA_MAP_STATE
select NEED_SG_DMA_LENGTH
select HAVE_ARCH_KGDB
select HAVE_KPROBES
select HAVE_KRETPROBES
select HAVE_DYNAMIC_FTRACE if $(cc-option,-fpatchable-function-entry=1,1)
select HAVE_FTRACE_MCOUNT_RECORD if HAVE_DYNAMIC_FTRACE
select FTRACE_MCOUNT_USE_PATCHABLE_FUNCTION_ENTRY if DYNAMIC_FTRACE
select HAVE_KPROBES_ON_FTRACE
select HAVE_DYNAMIC_FTRACE_WITH_REGS
select HAVE_SOFTIRQ_ON_OWN_STACK if IRQSTACKS
select TRACE_IRQFLAGS_SUPPORT
select HAVE_FUNCTION_DESCRIPTORS if 64BIT
help
The PA-RISC microprocessor is designed by Hewlett-Packard and used
in many of their workstations & servers (HP9000 700 and 800 series,
and later HP3000 series). The PA-RISC Linux project home page is
at <https://parisc.wiki.kernel.org>.
config CPU_BIG_ENDIAN
def_bool y
config MMU
def_bool y
config STACK_GROWSUP
def_bool y
config GENERIC_LOCKBREAK
bool
default y
depends on SMP && PREEMPTION
config ARCH_HAS_ILOG2_U32
bool
default n
config ARCH_HAS_ILOG2_U64
bool
default n
config GENERIC_BUG
bool
default y
depends on BUG
config GENERIC_HWEIGHT
bool
default y
config GENERIC_CALIBRATE_DELAY
bool
default y
config TIME_LOW_RES
bool
depends on SMP
default y
# unless you want to implement ACPI on PA-RISC ... ;-)
config PM
bool
config STACKTRACE_SUPPORT
def_bool y
config ISA_DMA_API
bool
config ARCH_MAY_HAVE_PC_FDC
bool
depends on BROKEN
default y
config PGTABLE_LEVELS
int
default 3 if 64BIT && PARISC_PAGE_SIZE_4KB
default 2
menu "Processor type and features"
choice
prompt "Processor type"
default PA7000 if "$(ARCH)" = "parisc"
config PA7000
bool "PA7000/PA7100" if "$(ARCH)" = "parisc"
help
This is the processor type of your CPU. This information is
used for optimizing purposes. In order to compile a kernel
that can run on all 32-bit PA CPUs (albeit not optimally fast),
you can specify "PA7000" here.
Specifying "PA8000" here will allow you to select a 64-bit kernel
which is required on some machines.
config PA7100LC
bool "PA7100LC" if "$(ARCH)" = "parisc"
help
Select this option for the PCX-L processor, as used in the
712, 715/64, 715/80, 715/100, 715/100XC, 725/100, 743, 748,
D200, D210, D300, D310 and E-class
config PA7200
bool "PA7200" if "$(ARCH)" = "parisc"
help
Select this option for the PCX-T' processor, as used in the
C100, C110, J100, J110, J210XC, D250, D260, D350, D360,
K100, K200, K210, K220, K400, K410 and K420
config PA7300LC
bool "PA7300LC" if "$(ARCH)" = "parisc"
help
Select this option for the PCX-L2 processor, as used in the
744, A180, B132L, B160L, B180L, C132L, C160L, C180L,
D220, D230, D320 and D330.
config PA8X00
bool "PA8000 and up"
help
Select this option for PCX-U to PCX-W2 processors.
endchoice
# Define implied options from the CPU selection here
config PA20
def_bool y
depends on PA8X00
config PA11
def_bool y
depends on PA7000 || PA7100LC || PA7200 || PA7300LC
select ARCH_HAS_SYNC_DMA_FOR_CPU
select ARCH_HAS_SYNC_DMA_FOR_DEVICE
config PREFETCH
def_bool y
depends on PA8X00 || PA7200
config PARISC_HUGE_KERNEL
def_bool y if !MODULES || UBSAN || FTRACE || COMPILE_TEST
config MLONGCALLS
def_bool y if PARISC_HUGE_KERNEL
bool "Enable the -mlong-calls compiler option for big kernels" if !PARISC_HUGE_KERNEL
depends on PA8X00
help
If you configure the kernel to include many drivers built-in instead
as modules, the kernel executable may become too big, so that the
linker will not be able to resolve some long branches and fails to link
your vmlinux kernel. In that case enabling this option will help you
to overcome this limit by using the -mlong-calls compiler option.
Usually you want to say N here, unless you e.g. want to build
a kernel which includes all necessary drivers built-in and which can
be used for TFTP booting without the need to have an initrd ramdisk.
Enabling this option will probably slow down your kernel.
config 64BIT
def_bool y if "$(ARCH)" = "parisc64"
bool "64-bit kernel" if "$(ARCH)" = "parisc"
depends on PA8X00
help
Enable this if you want to support 64bit kernel on PA-RISC platform.
At the moment, only people willing to use more than 2GB of RAM,
or having a 64bit-only capable PA-RISC machine should say Y here.
Since there is no 64bit userland on PA-RISC, there is no point to
enable this option otherwise. The 64bit kernel is significantly bigger
and slower than the 32bit one.
choice
prompt "Kernel page size"
default PARISC_PAGE_SIZE_4KB
config PARISC_PAGE_SIZE_4KB
bool "4KB"
help
This lets you select the page size of the kernel. For best
performance, a page size of 16KB is recommended. For best
compatibility with 32bit applications, a page size of 4KB should be
selected (the vast majority of 32bit binaries work perfectly fine
with a larger page size).
4KB For best 32bit compatibility
16KB For best performance
64KB For best performance, might give more overhead.
If you don't know what to do, choose 4KB.
config PARISC_PAGE_SIZE_16KB
bool "16KB"
depends on PA8X00 && BROKEN && !KFENCE
config PARISC_PAGE_SIZE_64KB
bool "64KB"
depends on PA8X00 && BROKEN && !KFENCE
endchoice
config SMP
bool "Symmetric multi-processing support"
help
This enables support for systems with more than one CPU. If you have
a system with only one CPU, say N. If you have a system with more
than one CPU, say Y.
If you say N here, the kernel will run on uni- and multiprocessor
machines, but will use only one CPU of a multiprocessor machine.
On a uniprocessor machine, the kernel will run faster if you say N.
See also <file:Documentation/admin-guide/lockup-watchdogs.rst> and the SMP-HOWTO
available at <https://www.tldp.org/docs.html#howto>.
If you don't know what to do here, say N.
config SCHED_MC
bool "Multi-core scheduler support"
depends on GENERIC_ARCH_TOPOLOGY && PA8X00
help
Multi-core scheduler support improves the CPU scheduler's decision
making when dealing with multi-core CPU chips at a cost of slightly
increased overhead in some places. If unsure say N here.
config IRQSTACKS
bool "Use separate kernel stacks when processing interrupts"
default y
help
If you say Y here the kernel will use separate kernel stacks
for handling hard and soft interrupts. This can help avoid
overflowing the process kernel stacks.
config TLB_PTLOCK
bool "Use page table locks in TLB fault handler"
depends on SMP
default n
help
Select this option to enable page table locking in the TLB
fault handler. This ensures that page table entries are
updated consistently on SMP machines at the expense of some
loss in performance.
config HOTPLUG_CPU
bool
default y if SMP
config ARCH_SELECT_MEMORY_MODEL
def_bool y
depends on 64BIT
config ARCH_SPARSEMEM_ENABLE
def_bool y
depends on 64BIT
config ARCH_FLATMEM_ENABLE
def_bool y
config ARCH_SPARSEMEM_DEFAULT
def_bool y
depends on ARCH_SPARSEMEM_ENABLE
source "kernel/Kconfig.hz"
config COMPAT
def_bool y
depends on 64BIT
config AUDIT_ARCH
def_bool y
config NR_CPUS
int "Maximum number of CPUs (2-32)"
range 2 32
depends on SMP
default "4" if 64BIT
default "16"
config KEXEC
bool "Kexec system call"
select KEXEC_CORE
help
kexec is a system call that implements the ability to shutdown your
current kernel, and to start another kernel. It is like a reboot
but it is independent of the system firmware. And like a reboot
you can start any kernel with it, not just Linux.
It is an ongoing process to be certain the hardware in a machine
shutdown, so do not be surprised if this code does not
initially work for you.
config KEXEC_FILE
bool "kexec file based system call"
select KEXEC_CORE
select KEXEC_ELF
help
This enables the kexec_file_load() System call. This is
file based and takes file descriptors as system call argument
for kernel and initramfs as opposed to list of segments as
accepted by previous system call.
endmenu
source "drivers/parisc/Kconfig"