blob: 7b331215c1acc985c2cbc4fc6e603fe7474e2bdc [file] [log] [blame]
/*
* Debug.h
*
* Dynamic (runtime) debug framework implementation.
* -kaiwan.
*/
#ifndef _DEBUG_H
#define _DEBUG_H
#include <linux/string.h>
#define NONE 0xFFFF
/* TYPE and SUBTYPE
* Define valid TYPE (or category or code-path, however you like to think of it)
* and SUBTYPE s.
* Type and SubType are treated as bitmasks.
*/
#define DBG_TYPE_INITEXIT (1 << 0) /* 1 */
#define DBG_TYPE_TX (1 << 1) /* 2 */
#define DBG_TYPE_RX (1 << 2) /* 4 */
#define DBG_TYPE_OTHERS (1 << 3) /* 8 */
#define NUMTYPES 4
/* -SUBTYPEs for TX : TYPE is DBG_TYPE_TX -----//
* Transmit.c ,Arp.c, LeakyBucket.c, And Qos.c
* total 17 macros
*/
/* Transmit.c */
#define TX 1
#define MP_SEND (TX << 0)
#define NEXT_SEND (TX << 1)
#define TX_FIFO (TX << 2)
#define TX_CONTROL (TX << 3)
/* Arp.c */
#define IP_ADDR (TX << 4)
#define ARP_REQ (TX << 5)
#define ARP_RESP (TX << 6)
/* Leakybucket.c */
#define TOKEN_COUNTS (TX << 8)
#define CHECK_TOKENS (TX << 9)
#define TX_PACKETS (TX << 10)
#define TIMER (TX << 11)
/* Qos.c */
#define QOS TX
#define QUEUE_INDEX (QOS << 12)
#define IPV4_DBG (QOS << 13)
#define IPV6_DBG (QOS << 14)
#define PRUNE_QUEUE (QOS << 15)
#define SEND_QUEUE (QOS << 16)
/* TX_Misc */
#define TX_OSAL_DBG (TX << 17)
/* --SUBTYPEs for ------INIT & EXIT---------------------
* ------------ TYPE is DBG_TYPE_INITEXIT -----//
* DriverEntry.c, bcmfwup.c, ChipDetectTask.c, HaltnReset.c, InterfaceDDR.c
*/
#define MP 1
#define DRV_ENTRY (MP << 0)
#define MP_INIT (MP << 1)
#define READ_REG (MP << 3)
#define DISPATCH (MP << 2)
#define CLAIM_ADAP (MP << 4)
#define REG_IO_PORT (MP << 5)
#define INIT_DISP (MP << 6)
#define RX_INIT (MP << 7)
/* -SUBTYPEs for --RX----------------------------------
* ------------RX : TYPE is DBG_TYPE_RX -----//
* Receive.c
*/
#define RX 1
#define RX_DPC (RX << 0)
#define RX_CTRL (RX << 3)
#define RX_DATA (RX << 4)
#define MP_RETURN (RX << 1)
#define LINK_MSG (RX << 2)
/* -SUBTYPEs for ----OTHER ROUTINES------------------
* ------------OTHERS : TYPE is DBG_TYPE_OTHER -----//
* HaltnReset,CheckForHang,PnP,Misc,CmHost
* total 12 macros
*/
#define OTHERS 1
#define ISR OTHERS
#define MP_DPC (ISR << 0)
/* HaltnReset.c */
#define HALT OTHERS
#define MP_HALT (HALT << 1)
#define CHECK_HANG (HALT << 2)
#define MP_RESET (HALT << 3)
#define MP_SHUTDOWN (HALT << 4)
/* pnp.c */
#define PNP OTHERS
#define MP_PNP (PNP << 5)
/* Misc.c */
#define MISC OTHERS
#define DUMP_INFO (MISC << 6)
#define CLASSIFY (MISC << 7)
#define LINK_UP_MSG (MISC << 8)
#define CP_CTRL_PKT (MISC << 9)
#define DUMP_CONTROL (MISC << 10)
#define LED_DUMP_INFO (MISC << 11)
/* CmHost.c */
#define CMHOST OTHERS
#define SERIAL (OTHERS << 12)
#define IDLE_MODE (OTHERS << 13)
#define WRM (OTHERS << 14)
#define RDM (OTHERS << 15)
/* TODO - put PHS_SEND in Tx PHS_RECEIVE in Rx path ? */
#define PHS_SEND (OTHERS << 16)
#define PHS_RECEIVE (OTHERS << 17)
#define PHS_MODULE (OTHERS << 18)
#define INTF_INIT (OTHERS << 19)
#define INTF_ERR (OTHERS << 20)
#define INTF_WARN (OTHERS << 21)
#define INTF_NORM (OTHERS << 22)
#define IRP_COMPLETION (OTHERS << 23)
#define SF_DESCRIPTOR_CNTS (OTHERS << 24)
#define PHS_DISPATCH (OTHERS << 25)
#define OSAL_DBG (OTHERS << 26)
#define NVM_RW (OTHERS << 27)
#define HOST_MIBS (OTHERS << 28)
#define CONN_MSG (CMHOST << 29)
/* Debug level
* We have 8 debug levels, in (numerical) increasing order of verbosity.
* IMP: Currently implementing ONLY DBG_LVL_ALL , i.e. , all debug prints will
* appear (of course, iff global debug flag is ON and we match the Type and SubType).
* Finer granularity debug levels are currently not in use, although the feature exists.
*
* Another way to say this:
* All the debug prints currently have 'debug_level' set to DBG_LVL_ALL .
* You can compile-time change that to any of the below, if you wish to. However, as of now, there's
* no dynamic facility to have the userspace 'TestApp' set debug_level. Slated for future expansion.
*/
#define BCM_ALL 7
#define BCM_LOW 6
#define BCM_PRINT 5
#define BCM_NORMAL 4
#define BCM_MEDIUM 3
#define BCM_SCREAM 2
#define BCM_ERR 1
/* Not meant for developer in debug prints.
* To be used to disable all prints by setting the DBG_LVL_CURR to this value
*/
#define BCM_NONE 0
/* The current driver logging level.
* Everything at this level and (numerically) lower (meaning higher prio)
* is logged.
* Replace 'BCM_ALL' in the DBG_LVL_CURR macro with the logging level desired.
* For eg. to set the logging level to 'errors only' use:
* #define DBG_LVL_CURR (BCM_ERR)
*/
#define DBG_LVL_CURR (BCM_ALL)
#define DBG_LVL_ALL BCM_ALL
/* ---Userspace mapping of Debug State.
* Delibrately matches that of the Windows driver..
* The TestApp's ioctl passes this struct to us.
*/
struct bcm_user_debug_state {
unsigned int Subtype, Type;
unsigned int OnOff;
/* unsigned int debug_level; future expansion */
} __packed;
/* ---Kernel-space mapping of Debug State */
struct bcm_debug_state {
unsigned int type;
/* A bitmap of 32 bits for Subtype per Type.
* Valid indexes in 'subtype' array are *only* 1,2,4 and 8,
* corresponding to valid Type values. Hence we use the 'Type' field
* as the index value, ignoring the array entries 0,3,5,6,7 !
*/
unsigned int subtype[(NUMTYPES*2)+1];
unsigned int debug_level;
};
/* Instantiated in the Adapter structure
* We'll reuse the debug level parameter to include a bit (the MSB) to indicate whether or not
* we want the function's name printed.
*/
#define DBG_NO_FUNC_PRINT (1 << 31)
#define DBG_LVL_BITMASK 0xFF
/* --- Only for direct printk's; "hidden" to API. */
#define DBG_TYPE_PRINTK 3
#define BCM_DEBUG_PRINT(Adapter, Type, SubType, dbg_level, string, args...) \
do { \
if (DBG_TYPE_PRINTK == Type) \
pr_info("%s:" string, __func__, ##args); \
else if (Adapter && \
(dbg_level & DBG_LVL_BITMASK) <= Adapter->stDebugState.debug_level && \
(Type & Adapter->stDebugState.type) && \
(SubType & Adapter->stDebugState.subtype[Type])) { \
if (dbg_level & DBG_NO_FUNC_PRINT) \
pr_debug("%s:\n", string); \
else \
pr_debug("%s:\n" string, __func__, ##args); \
} \
} while (0)
#define BCM_DEBUG_PRINT_BUFFER(Adapter, Type, SubType, dbg_level, buffer, bufferlen) \
do { \
if (DBG_TYPE_PRINTK == Type || \
(Adapter && \
(dbg_level & DBG_LVL_BITMASK) <= Adapter->stDebugState.debug_level && \
(Type & Adapter->stDebugState.type) && \
(SubType & Adapter->stDebugState.subtype[Type]))) { \
pr_debug("%s:\n", __func__); \
print_hex_dump(KERN_DEBUG, " ", DUMP_PREFIX_OFFSET, \
16, 1, buffer, bufferlen, false); \
} \
} while (0)
#define BCM_SHOW_DEBUG_BITMAP(Adapter) do { \
int i; \
for (i = 0; i < (NUMTYPES * 2) + 1; i++) { \
if ((i == 1) || (i == 2) || (i == 4) || (i == 8)) { \
/* CAUTION! Forcefully turn on ALL debug paths and subpaths! \
* Adapter->stDebugState.subtype[i] = 0xffffffff; \
*/ \
BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "subtype[%d] = 0x%08x\n", \
i, Adapter->stDebugState.subtype[i]); \
} \
} \
} while (0)
#endif