blob: efdeb751004798f7c5887c0999f73e5ab8a6553d [file] [log] [blame]
/*
* SBE 2T3E3 synchronous serial card driver for Linux
*
* Copyright (C) 2009-2010 Krzysztof Halasa <khc@pm.waw.pl>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of version 2 of the GNU General Public License
* as published by the Free Software Foundation.
*
* This code is based on a driver written by SBE Inc.
*/
#include <linux/hdlc.h>
#include <linux/interrupt.h>
#include <linux/netdevice.h>
#include "2t3e3.h"
irqreturn_t t3e3_intr(int irq, void *dev_instance)
{
struct channel *sc = dev_to_priv(dev_instance);
u32 val;
irqreturn_t ret = IRQ_NONE;
sc->interrupt_active = 1;
val = cpld_read(sc, SBE_2T3E3_CPLD_REG_PICSR);
if (val & SBE_2T3E3_CPLD_VAL_RECEIVE_LOSS_OF_SIGNAL_CHANGE) {
dev_dbg(&sc->pdev->dev,
"Rx LOS Chng Int r=%02x (LOS|OOF=%02x)\n",
val, (sc->s.LOS << 4) | sc->s.OOF);
cpld_LOS_update(sc);
ret = IRQ_HANDLED;
}
if (val & SBE_2T3E3_CPLD_VAL_INTERRUPT_FROM_ETHERNET_ASSERTED) {
dc_intr(sc);
ret = IRQ_HANDLED;
}
if (val & SBE_2T3E3_CPLD_VAL_INTERRUPT_FROM_FRAMER_ASSERTED) {
exar7250_intr(sc);
ret = IRQ_HANDLED;
}
/*
we don't care about other interrupt sources (DMO, LOS, LCV) because
they are handled by Framer too
*/
sc->interrupt_active = 0;
return ret;
}
void dc_intr(struct channel *sc)
{
u32 val;
/* disable ethernet interrupts */
/* grrr this clears interrupt summary bits !!! */
dc_write(sc->addr, SBE_2T3E3_21143_REG_INTERRUPT_ENABLE, 0);
while ((val = dc_read(sc->addr, SBE_2T3E3_21143_REG_STATUS)) &
(SBE_2T3E3_21143_VAL_RECEIVE_PROCESS_STOPPED |
SBE_2T3E3_21143_VAL_RECEIVE_BUFFER_UNAVAILABLE |
SBE_2T3E3_21143_VAL_RECEIVE_INTERRUPT |
SBE_2T3E3_21143_VAL_TRANSMIT_UNDERFLOW |
SBE_2T3E3_21143_VAL_TRANSMIT_BUFFER_UNAVAILABLE |
SBE_2T3E3_21143_VAL_TRANSMIT_PROCESS_STOPPED |
SBE_2T3E3_21143_VAL_TRANSMIT_INTERRUPT)) {
dc_write(sc->addr, SBE_2T3E3_21143_REG_STATUS, val);
dev_dbg(&sc->pdev->dev, "SBE 2T3E3: Ethernet controller interrupt! (CSR5 = %08X)\n",
val);
if (val & (SBE_2T3E3_21143_VAL_RECEIVE_INTERRUPT |
SBE_2T3E3_21143_VAL_RECEIVE_BUFFER_UNAVAILABLE |
SBE_2T3E3_21143_VAL_RECEIVE_PROCESS_STOPPED)) {
if (val & SBE_2T3E3_21143_VAL_RECEIVE_INTERRUPT)
dev_dbg(&sc->pdev->dev,
"Receive interrupt (LOS=%d, OOF=%d)\n",
sc->s.LOS, sc->s.OOF);
if (val & SBE_2T3E3_21143_VAL_RECEIVE_BUFFER_UNAVAILABLE)
dev_dbg(&sc->pdev->dev,
"Receive buffer unavailable\n");
if (val & SBE_2T3E3_21143_VAL_RECEIVE_PROCESS_STOPPED)
dev_dbg(&sc->pdev->dev,
"Receive process stopped\n");
dc_intr_rx(sc);
}
if (val & SBE_2T3E3_21143_VAL_TRANSMIT_UNDERFLOW) {
dev_dbg(&sc->pdev->dev, "Transmit underflow\n");
dc_intr_tx_underflow(sc);
}
if (val & (SBE_2T3E3_21143_VAL_TRANSMIT_BUFFER_UNAVAILABLE |
SBE_2T3E3_21143_VAL_TRANSMIT_INTERRUPT |
SBE_2T3E3_21143_VAL_TRANSMIT_PROCESS_STOPPED)) {
if (val & SBE_2T3E3_21143_VAL_TRANSMIT_INTERRUPT)
dev_dbg(&sc->pdev->dev, "Transmit interrupt\n");
if (val & SBE_2T3E3_21143_VAL_TRANSMIT_BUFFER_UNAVAILABLE)
dev_dbg(&sc->pdev->dev,
"Transmit buffer unavailable\n");
if (val & SBE_2T3E3_21143_VAL_TRANSMIT_PROCESS_STOPPED)
dev_dbg(&sc->pdev->dev,
"Transmit process stopped\n");
dc_intr_tx(sc);
}
}
/* enable ethernet interrupts */
dc_write(sc->addr, SBE_2T3E3_21143_REG_INTERRUPT_ENABLE,
sc->ether.interrupt_enable_mask);
}
void dc_intr_rx(struct channel *sc)
{
u32 current_read;
u32 error_mask, error;
t3e3_rx_desc_t *current_desc;
struct sk_buff *m, *m2;
unsigned rcv_len;
sc->rcv_count++; /* for the activity LED */
current_read = sc->ether.rx_ring_current_read;
dev_dbg(&sc->pdev->dev, "intr_rx current_read = %d\n", current_read);
/* when ethernet loopback is set, ignore framer signals */
if ((sc->p.loopback != SBE_2T3E3_LOOPBACK_ETHERNET) && sc->s.OOF) {
while (!(sc->ether.rx_ring[current_read].rdes0 &
SBE_2T3E3_RX_DESC_21143_OWN)) {
current_desc = &sc->ether.rx_ring[current_read];
current_desc->rdes1 &= SBE_2T3E3_RX_DESC_END_OF_RING |
SBE_2T3E3_RX_DESC_SECOND_ADDRESS_CHAINED;
current_desc->rdes1 |= SBE_2T3E3_MTU;
current_desc->rdes0 = SBE_2T3E3_RX_DESC_21143_OWN;
current_read = (current_read + 1) % SBE_2T3E3_RX_DESC_RING_SIZE;
}
sc->ether.rx_ring_current_read = current_read;
return;
}
while (!(sc->ether.rx_ring[current_read].rdes0 &
SBE_2T3E3_RX_DESC_21143_OWN)) {
current_desc = &sc->ether.rx_ring[current_read];
dev_dbg(&sc->pdev->dev, "rdes0: %08X rdes1: %08X\n",
current_desc->rdes0, current_desc->rdes1);
m = sc->ether.rx_data[current_read];
rcv_len = (current_desc->rdes0 & SBE_2T3E3_RX_DESC_FRAME_LENGTH) >>
SBE_2T3E3_RX_DESC_FRAME_LENGTH_SHIFT;
dev_dbg(&sc->pdev->dev, "mbuf was received (mbuf len = %d)\n",
rcv_len);
switch (sc->p.crc) {
case SBE_2T3E3_CRC_16:
rcv_len -= SBE_2T3E3_CRC16_LENGTH;
break;
case SBE_2T3E3_CRC_32:
rcv_len -= SBE_2T3E3_CRC32_LENGTH;
break;
default:
break;
}
if (current_desc->rdes0 & SBE_2T3E3_RX_DESC_LAST_DESC) {
/* TODO: is collision possible? */
error_mask = SBE_2T3E3_RX_DESC_DESC_ERROR |
SBE_2T3E3_RX_DESC_COLLISION_SEEN |
SBE_2T3E3_RX_DESC_DRIBBLING_BIT;
switch (sc->p.frame_mode) {
case SBE_2T3E3_FRAME_MODE_HDLC:
error_mask |= SBE_2T3E3_RX_DESC_MII_ERROR;
if (sc->p.crc == SBE_2T3E3_CRC_32)
error_mask |= SBE_2T3E3_RX_DESC_CRC_ERROR;
break;
case SBE_2T3E3_FRAME_MODE_TRANSPARENT:
case SBE_2T3E3_FRAME_MODE_RAW:
break;
default:
error_mask = 0;
}
if (sc->s.LOS) {
error_mask &= ~(SBE_2T3E3_RX_DESC_DRIBBLING_BIT |
SBE_2T3E3_RX_DESC_MII_ERROR);
}
error = current_desc->rdes0 & error_mask;
if (error) {
sc->s.in_errors++;
dev_dbg(&sc->pdev->dev,
"error interrupt: NO_ERROR_MESSAGE = %d\n",
sc->r.flags & SBE_2T3E3_FLAG_NO_ERROR_MESSAGES ? 1 : 0);
current_desc->rdes1 &= SBE_2T3E3_RX_DESC_END_OF_RING |
SBE_2T3E3_RX_DESC_SECOND_ADDRESS_CHAINED;
current_desc->rdes1 |= SBE_2T3E3_MTU;
current_desc->rdes0 = SBE_2T3E3_RX_DESC_21143_OWN;
if (error & SBE_2T3E3_RX_DESC_DESC_ERROR) {
if (!(sc->r.flags & SBE_2T3E3_FLAG_NO_ERROR_MESSAGES))
dev_err(&sc->pdev->dev,
"SBE 2T3E3: descriptor error\n");
sc->s.in_error_desc++;
}
if (error & SBE_2T3E3_RX_DESC_COLLISION_SEEN) {
if (!(sc->r.flags & SBE_2T3E3_FLAG_NO_ERROR_MESSAGES))
dev_err(&sc->pdev->dev,
"SBE 2T3E3: collision seen\n");
sc->s.in_error_coll++;
} else {
if (error & SBE_2T3E3_RX_DESC_DRIBBLING_BIT) {
if (!(sc->r.flags & SBE_2T3E3_FLAG_NO_ERROR_MESSAGES))
dev_err(&sc->pdev->dev,
"SBE 2T3E3: dribbling bits error\n");
sc->s.in_error_drib++;
}
if (error & SBE_2T3E3_RX_DESC_CRC_ERROR) {
if (!(sc->r.flags & SBE_2T3E3_FLAG_NO_ERROR_MESSAGES))
dev_err(&sc->pdev->dev,
"SBE 2T3E3: crc error\n");
sc->s.in_error_crc++;
}
}
if (error & SBE_2T3E3_RX_DESC_MII_ERROR) {
if (!(sc->r.flags & SBE_2T3E3_FLAG_NO_ERROR_MESSAGES))
dev_err(&sc->pdev->dev, "SBE 2T3E3: mii error\n");
sc->s.in_error_mii++;
}
current_read = (current_read + 1) % SBE_2T3E3_RX_DESC_RING_SIZE;
sc->r.flags |= SBE_2T3E3_FLAG_NO_ERROR_MESSAGES;
continue;
}
}
current_desc->rdes1 &= SBE_2T3E3_RX_DESC_END_OF_RING |
SBE_2T3E3_RX_DESC_SECOND_ADDRESS_CHAINED;
current_desc->rdes1 |= SBE_2T3E3_MTU;
if (rcv_len > 1600) {
sc->s.in_errors++;
sc->s.in_dropped++;
if (!(sc->r.flags & SBE_2T3E3_FLAG_NO_ERROR_MESSAGES))
dev_err(&sc->pdev->dev, "SBE 2T3E3: oversized rx: rdes0 = %08X\n",
current_desc->rdes0);
} else {
m2 = dev_alloc_skb(MCLBYTES);
if (m2 != NULL) {
current_desc->rdes2 = virt_to_phys(m2->data);
sc->ether.rx_data[current_read] = m2;
sc->s.in_packets++;
sc->s.in_bytes += rcv_len;
m->dev = sc->dev;
skb_put(m, rcv_len);
skb_reset_mac_header(m);
m->protocol = hdlc_type_trans(m, m->dev);
netif_rx(m);
/* good packet was received so we will show error messages again... */
if (sc->r.flags & SBE_2T3E3_FLAG_NO_ERROR_MESSAGES) {
dev_dbg(&sc->pdev->dev,
"setting ERROR_MESSAGES->0\n");
sc->r.flags &= ~SBE_2T3E3_FLAG_NO_ERROR_MESSAGES;
}
} else {
sc->s.in_errors++;
sc->s.in_dropped++;
}
}
current_desc->rdes0 = SBE_2T3E3_RX_DESC_21143_OWN;
current_read = (current_read + 1) % SBE_2T3E3_RX_DESC_RING_SIZE;
}
sc->ether.rx_ring_current_read = current_read;
dc_write(sc->addr, SBE_2T3E3_21143_REG_RECEIVE_POLL_DEMAND, 0xFFFFFFFF);
}
void dc_intr_tx(struct channel *sc)
{
u32 current_read, current_write;
u32 last_segment, error;
t3e3_tx_desc_t *current_desc;
spin_lock(&sc->ether.tx_lock);
current_read = sc->ether.tx_ring_current_read;
current_write = sc->ether.tx_ring_current_write;
while (current_read != current_write) {
current_desc = &sc->ether.tx_ring[current_read];
if (current_desc->tdes0 & SBE_2T3E3_RX_DESC_21143_OWN)
break;
dev_dbg(&sc->pdev->dev,
"txeof: tdes0 = %08X tdes1 = %08X\n",
current_desc->tdes0, current_desc->tdes1);
error = current_desc->tdes0 & (SBE_2T3E3_TX_DESC_ERROR_SUMMARY |
SBE_2T3E3_TX_DESC_TRANSMIT_JABBER_TIMEOUT |
SBE_2T3E3_TX_DESC_LOSS_OF_CARRIER |
SBE_2T3E3_TX_DESC_NO_CARRIER |
SBE_2T3E3_TX_DESC_LINK_FAIL_REPORT |
SBE_2T3E3_TX_DESC_UNDERFLOW_ERROR |
SBE_2T3E3_TX_DESC_DEFFERED);
last_segment = current_desc->tdes1 & SBE_2T3E3_TX_DESC_LAST_SEGMENT;
current_desc->tdes0 = 0;
current_desc->tdes1 &= SBE_2T3E3_TX_DESC_END_OF_RING |
SBE_2T3E3_TX_DESC_SECOND_ADDRESS_CHAINED;
current_desc->tdes2 = 0;
sc->ether.tx_free_cnt++;
if (last_segment != SBE_2T3E3_TX_DESC_LAST_SEGMENT) {
current_read = (current_read + 1) % SBE_2T3E3_TX_DESC_RING_SIZE;
continue;
}
if (sc->ether.tx_data[current_read]) {
sc->s.out_packets++;
sc->s.out_bytes += sc->ether.tx_data[current_read]->len;
dev_kfree_skb_any(sc->ether.tx_data[current_read]);
sc->ether.tx_data[current_read] = NULL;
}
if (error > 0) {
sc->s.out_errors++;
if (error & SBE_2T3E3_TX_DESC_TRANSMIT_JABBER_TIMEOUT) {
dev_err(&sc->pdev->dev, "SBE 2T3E3: transmit jabber timeout\n");
sc->s.out_error_jab++;
}
if (sc->p.loopback != SBE_2T3E3_LOOPBACK_ETHERNET) {
if (error & SBE_2T3E3_TX_DESC_LOSS_OF_CARRIER) {
dev_err(&sc->pdev->dev, "SBE 2T3E3: loss of carrier\n");
sc->s.out_error_lost_carr++;
}
if (error & SBE_2T3E3_TX_DESC_NO_CARRIER) {
dev_err(&sc->pdev->dev, "SBE 2T3E3: no carrier\n");
sc->s.out_error_no_carr++;
}
}
if (error & SBE_2T3E3_TX_DESC_LINK_FAIL_REPORT) {
dev_err(&sc->pdev->dev, "SBE 2T3E3: link fail report\n");
sc->s.out_error_link_fail++;
}
if (error & SBE_2T3E3_TX_DESC_UNDERFLOW_ERROR) {
dev_err(&sc->pdev->dev, "SBE 2T3E3:"
" transmission underflow error\n");
sc->s.out_error_underflow++;
spin_unlock(&sc->ether.tx_lock);
dc_restart(sc);
return;
}
if (error & SBE_2T3E3_TX_DESC_DEFFERED) {
dev_err(&sc->pdev->dev, "SBE 2T3E3: transmission deferred\n");
sc->s.out_error_dereferred++;
}
}
current_read = (current_read + 1) % SBE_2T3E3_TX_DESC_RING_SIZE;
}
sc->ether.tx_ring_current_read = current_read;
/* Relieve flow control when the TX queue is drained at least half way */
if (sc->ether.tx_full &&
(sc->ether.tx_free_cnt >= (SBE_2T3E3_TX_DESC_RING_SIZE / 2))) {
sc->ether.tx_full = 0;
netif_wake_queue(sc->dev);
}
spin_unlock(&sc->ether.tx_lock);
}
void dc_intr_tx_underflow(struct channel *sc)
{
u32 val;
dc_transmitter_onoff(sc, SBE_2T3E3_OFF);
val = dc_read(sc->addr, SBE_2T3E3_21143_REG_OPERATION_MODE);
dc_clear_bits(sc->addr, SBE_2T3E3_21143_REG_OPERATION_MODE,
SBE_2T3E3_21143_VAL_THRESHOLD_CONTROL_BITS);
switch (val & SBE_2T3E3_21143_VAL_THRESHOLD_CONTROL_BITS) {
case SBE_2T3E3_21143_VAL_THRESHOLD_CONTROL_BITS_1:
dc_set_bits(sc->addr, SBE_2T3E3_21143_REG_OPERATION_MODE,
SBE_2T3E3_21143_VAL_THRESHOLD_CONTROL_BITS_2);
break;
case SBE_2T3E3_21143_VAL_THRESHOLD_CONTROL_BITS_2:
dc_set_bits(sc->addr, SBE_2T3E3_21143_REG_OPERATION_MODE,
SBE_2T3E3_21143_VAL_THRESHOLD_CONTROL_BITS_3);
break;
case SBE_2T3E3_21143_VAL_THRESHOLD_CONTROL_BITS_3:
dc_set_bits(sc->addr, SBE_2T3E3_21143_REG_OPERATION_MODE,
SBE_2T3E3_21143_VAL_THRESHOLD_CONTROL_BITS_4);
break;
case SBE_2T3E3_21143_VAL_THRESHOLD_CONTROL_BITS_4:
default:
dc_set_bits(sc->addr, SBE_2T3E3_21143_REG_OPERATION_MODE,
SBE_2T3E3_21143_VAL_STORE_AND_FORWARD);
break;
}
dc_transmitter_onoff(sc, SBE_2T3E3_ON);
}
void exar7250_intr(struct channel *sc)
{
u32 status, old_OOF;
old_OOF = sc->s.OOF;
status = exar7250_read(sc, SBE_2T3E3_FRAMER_REG_BLOCK_INTERRUPT_STATUS);
dev_dbg(&sc->pdev->dev, "SBE 2T3E3: Framer interrupt! (REG[0x05] = %02X)\n", status);
switch (sc->p.frame_type) {
case SBE_2T3E3_FRAME_TYPE_E3_G751:
case SBE_2T3E3_FRAME_TYPE_E3_G832:
exar7250_E3_intr(sc, status);
break;
case SBE_2T3E3_FRAME_TYPE_T3_CBIT:
case SBE_2T3E3_FRAME_TYPE_T3_M13:
exar7250_T3_intr(sc, status);
break;
default:
break;
}
if (sc->s.OOF != old_OOF) {
if (sc->s.OOF) {
if (sc->p.loopback == SBE_2T3E3_LOOPBACK_NONE) {
dev_dbg(&sc->pdev->dev, "SBE 2T3E3: Disabling eth interrupts\n");
/* turn off ethernet interrupts */
dc_stop_intr(sc);
}
} else if (sc->r.flags & SBE_2T3E3_FLAG_NETWORK_UP) {
dev_dbg(&sc->pdev->dev, "SBE 2T3E3: Enabling eth interrupts\n");
/* start interrupts */
sc->s.OOF = 1;
dc_intr_rx(sc);
sc->s.OOF = 0;
if (sc->p.receiver_on) {
dc_receiver_onoff(sc, SBE_2T3E3_OFF);
dc_receiver_onoff(sc, SBE_2T3E3_ON);
}
dc_start_intr(sc);
}
}
}
void exar7250_T3_intr(struct channel *sc, u32 block_status)
{
u32 status, result;
if (block_status & SBE_2T3E3_FRAMER_VAL_RX_INTERRUPT_STATUS) {
status = exar7250_read(sc, SBE_2T3E3_FRAMER_REG_T3_RX_INTERRUPT_STATUS);
if (status) {
dev_dbg(&sc->pdev->dev,
"Framer interrupt T3 RX (REG[0x13] = %02X)\n",
status);
result = exar7250_read(sc, SBE_2T3E3_FRAMER_REG_T3_RX_CONFIGURATION_STATUS);
cpld_LOS_update(sc);
if (status & SBE_2T3E3_FRAMER_VAL_T3_RX_OOF_INTERRUPT_STATUS) {
sc->s.OOF = result & SBE_2T3E3_FRAMER_VAL_T3_RX_OOF ? 1 : 0;
dev_dbg(&sc->pdev->dev,
"Framer interrupt T3: OOF (%d)\n",
sc->s.OOF);
}
exar7250_write(sc, SBE_2T3E3_FRAMER_REG_T3_RX_INTERRUPT_ENABLE,
SBE_2T3E3_FRAMER_VAL_T3_RX_LOS_INTERRUPT_ENABLE |
SBE_2T3E3_FRAMER_VAL_T3_RX_OOF_INTERRUPT_ENABLE);
}
status = exar7250_read(sc, SBE_2T3E3_FRAMER_REG_T3_RX_FEAC_INTERRUPT_ENABLE_STATUS);
if (status) {
dev_dbg(&sc->pdev->dev,
"Framer interrupt T3 RX (REG[0x17] = %02X)\n",
status);
}
status = exar7250_read(sc, SBE_2T3E3_FRAMER_REG_T3_RX_LAPD_CONTROL);
if (status)
dev_dbg(&sc->pdev->dev,
"Framer interrupt T3 RX (REG[0x18] = %02X)\n",
status);
}
if (block_status & SBE_2T3E3_FRAMER_VAL_TX_INTERRUPT_STATUS) {
status = exar7250_read(sc, SBE_2T3E3_FRAMER_REG_T3_TX_FEAC_CONFIGURATION_STATUS);
dev_dbg(&sc->pdev->dev, "SBE 2T3E3: Framer interrupt T3 TX (REG[0x31] = %02X)\n",
status);
status = exar7250_read(sc, SBE_2T3E3_FRAMER_REG_T3_TX_LAPD_STATUS);
dev_dbg(&sc->pdev->dev, "SBE 2T3E3: Framer interrupt T3 TX (REG[0x34] = %02X)\n",
status);
}
}
void exar7250_E3_intr(struct channel *sc, u32 block_status)
{
u32 status, result;
if (block_status & SBE_2T3E3_FRAMER_VAL_RX_INTERRUPT_STATUS) {
status = exar7250_read(sc, SBE_2T3E3_FRAMER_REG_E3_RX_INTERRUPT_STATUS_1);
if (status) {
dev_dbg(&sc->pdev->dev,
"Framer interrupt E3 RX (REG[0x14] = %02X)\n",
status);
result = exar7250_read(sc, SBE_2T3E3_FRAMER_REG_E3_RX_CONFIGURATION_STATUS_2);
cpld_LOS_update(sc);
if (status & SBE_2T3E3_FRAMER_VAL_E3_RX_OOF_INTERRUPT_STATUS) {
sc->s.OOF = result & SBE_2T3E3_FRAMER_VAL_E3_RX_OOF ? 1 : 0;
dev_dbg(&sc->pdev->dev,
"Framer interrupt E3: OOF (%d)\n",
sc->s.OOF);
}
exar7250_write(sc, SBE_2T3E3_FRAMER_REG_E3_RX_INTERRUPT_ENABLE_1,
SBE_2T3E3_FRAMER_VAL_E3_RX_OOF_INTERRUPT_ENABLE |
SBE_2T3E3_FRAMER_VAL_E3_RX_LOS_INTERRUPT_ENABLE
);
}
status = exar7250_read(sc, SBE_2T3E3_FRAMER_REG_E3_RX_INTERRUPT_STATUS_2);
if (status) {
dev_dbg(&sc->pdev->dev,
"Framer interrupt E3 RX (REG[0x15] = %02X)\n",
status);
}
}
if (block_status & SBE_2T3E3_FRAMER_VAL_TX_INTERRUPT_STATUS) {
status = exar7250_read(sc, SBE_2T3E3_FRAMER_REG_E3_TX_LAPD_STATUS);
dev_dbg(&sc->pdev->dev, "SBE 2T3E3: Framer interrupt E3 TX (REG[0x34] = %02X)\n",
status);
}
}