|  | /* | 
|  | * extcon-arizona.c - Extcon driver Wolfson Arizona devices | 
|  | * | 
|  | *  Copyright (C) 2012-2014 Wolfson Microelectronics plc | 
|  | * | 
|  | * This program is free software; you can redistribute it and/or modify | 
|  | * it under the terms of the GNU General Public License as published by | 
|  | * the Free Software Foundation; either version 2 of the License, or | 
|  | * (at your option) any later version. | 
|  | * | 
|  | * This program is distributed in the hope that it will be useful, | 
|  | * but WITHOUT ANY WARRANTY; without even the implied warranty of | 
|  | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the | 
|  | * GNU General Public License for more details. | 
|  | */ | 
|  |  | 
|  | #include <linux/kernel.h> | 
|  | #include <linux/module.h> | 
|  | #include <linux/i2c.h> | 
|  | #include <linux/slab.h> | 
|  | #include <linux/interrupt.h> | 
|  | #include <linux/err.h> | 
|  | #include <linux/gpio/consumer.h> | 
|  | #include <linux/gpio.h> | 
|  | #include <linux/input.h> | 
|  | #include <linux/platform_device.h> | 
|  | #include <linux/pm_runtime.h> | 
|  | #include <linux/property.h> | 
|  | #include <linux/regulator/consumer.h> | 
|  | #include <linux/extcon.h> | 
|  |  | 
|  | #include <sound/soc.h> | 
|  |  | 
|  | #include <linux/mfd/arizona/core.h> | 
|  | #include <linux/mfd/arizona/pdata.h> | 
|  | #include <linux/mfd/arizona/registers.h> | 
|  | #include <dt-bindings/mfd/arizona.h> | 
|  |  | 
|  | #define ARIZONA_MAX_MICD_RANGE 8 | 
|  |  | 
|  | #define ARIZONA_MICD_CLAMP_MODE_JDL      0x4 | 
|  | #define ARIZONA_MICD_CLAMP_MODE_JDH      0x5 | 
|  | #define ARIZONA_MICD_CLAMP_MODE_JDL_GP5H 0x9 | 
|  | #define ARIZONA_MICD_CLAMP_MODE_JDH_GP5H 0xb | 
|  |  | 
|  | #define ARIZONA_TST_CAP_DEFAULT 0x3 | 
|  | #define ARIZONA_TST_CAP_CLAMP   0x1 | 
|  |  | 
|  | #define ARIZONA_HPDET_MAX 10000 | 
|  |  | 
|  | #define HPDET_DEBOUNCE 500 | 
|  | #define DEFAULT_MICD_TIMEOUT 2000 | 
|  |  | 
|  | #define ARIZONA_HPDET_WAIT_COUNT 15 | 
|  | #define ARIZONA_HPDET_WAIT_DELAY_MS 20 | 
|  |  | 
|  | #define QUICK_HEADPHONE_MAX_OHM 3 | 
|  | #define MICROPHONE_MIN_OHM      1257 | 
|  | #define MICROPHONE_MAX_OHM      30000 | 
|  |  | 
|  | #define MICD_DBTIME_TWO_READINGS 2 | 
|  | #define MICD_DBTIME_FOUR_READINGS 4 | 
|  |  | 
|  | #define MICD_LVL_1_TO_7 (ARIZONA_MICD_LVL_1 | ARIZONA_MICD_LVL_2 | \ | 
|  | ARIZONA_MICD_LVL_3 | ARIZONA_MICD_LVL_4 | \ | 
|  | ARIZONA_MICD_LVL_5 | ARIZONA_MICD_LVL_6 | \ | 
|  | ARIZONA_MICD_LVL_7) | 
|  |  | 
|  | #define MICD_LVL_0_TO_7 (ARIZONA_MICD_LVL_0 | MICD_LVL_1_TO_7) | 
|  |  | 
|  | #define MICD_LVL_0_TO_8 (MICD_LVL_0_TO_7 | ARIZONA_MICD_LVL_8) | 
|  |  | 
|  | struct arizona_extcon_info { | 
|  | struct device *dev; | 
|  | struct arizona *arizona; | 
|  | struct mutex lock; | 
|  | struct regulator *micvdd; | 
|  | struct input_dev *input; | 
|  |  | 
|  | u16 last_jackdet; | 
|  |  | 
|  | int micd_mode; | 
|  | const struct arizona_micd_config *micd_modes; | 
|  | int micd_num_modes; | 
|  |  | 
|  | const struct arizona_micd_range *micd_ranges; | 
|  | int num_micd_ranges; | 
|  |  | 
|  | int micd_timeout; | 
|  |  | 
|  | bool micd_reva; | 
|  | bool micd_clamp; | 
|  |  | 
|  | struct delayed_work hpdet_work; | 
|  | struct delayed_work micd_detect_work; | 
|  | struct delayed_work micd_timeout_work; | 
|  |  | 
|  | bool hpdet_active; | 
|  | bool hpdet_done; | 
|  | bool hpdet_retried; | 
|  |  | 
|  | int num_hpdet_res; | 
|  | unsigned int hpdet_res[3]; | 
|  |  | 
|  | bool mic; | 
|  | bool detecting; | 
|  | int jack_flips; | 
|  |  | 
|  | int hpdet_ip_version; | 
|  |  | 
|  | struct extcon_dev *edev; | 
|  |  | 
|  | struct gpio_desc *micd_pol_gpio; | 
|  | }; | 
|  |  | 
|  | static const struct arizona_micd_config micd_default_modes[] = { | 
|  | { ARIZONA_ACCDET_SRC, 1, 0 }, | 
|  | { 0,                  2, 1 }, | 
|  | }; | 
|  |  | 
|  | static const struct arizona_micd_range micd_default_ranges[] = { | 
|  | { .max =  11, .key = BTN_0 }, | 
|  | { .max =  28, .key = BTN_1 }, | 
|  | { .max =  54, .key = BTN_2 }, | 
|  | { .max = 100, .key = BTN_3 }, | 
|  | { .max = 186, .key = BTN_4 }, | 
|  | { .max = 430, .key = BTN_5 }, | 
|  | }; | 
|  |  | 
|  | /* The number of levels in arizona_micd_levels valid for button thresholds */ | 
|  | #define ARIZONA_NUM_MICD_BUTTON_LEVELS 64 | 
|  |  | 
|  | static const int arizona_micd_levels[] = { | 
|  | 3, 6, 8, 11, 13, 16, 18, 21, 23, 26, 28, 31, 34, 36, 39, 41, 44, 46, | 
|  | 49, 52, 54, 57, 60, 62, 65, 67, 70, 73, 75, 78, 81, 83, 89, 94, 100, | 
|  | 105, 111, 116, 122, 127, 139, 150, 161, 173, 186, 196, 209, 220, 245, | 
|  | 270, 295, 321, 348, 375, 402, 430, 489, 550, 614, 681, 752, 903, 1071, | 
|  | 1257, 30000, | 
|  | }; | 
|  |  | 
|  | static const unsigned int arizona_cable[] = { | 
|  | EXTCON_MECHANICAL, | 
|  | EXTCON_JACK_MICROPHONE, | 
|  | EXTCON_JACK_HEADPHONE, | 
|  | EXTCON_JACK_LINE_OUT, | 
|  | EXTCON_NONE, | 
|  | }; | 
|  |  | 
|  | static void arizona_start_hpdet_acc_id(struct arizona_extcon_info *info); | 
|  |  | 
|  | static void arizona_extcon_hp_clamp(struct arizona_extcon_info *info, | 
|  | bool clamp) | 
|  | { | 
|  | struct arizona *arizona = info->arizona; | 
|  | unsigned int mask = 0, val = 0; | 
|  | unsigned int cap_sel = 0; | 
|  | int ret; | 
|  |  | 
|  | switch (arizona->type) { | 
|  | case WM8998: | 
|  | case WM1814: | 
|  | mask = 0; | 
|  | break; | 
|  | case WM5110: | 
|  | case WM8280: | 
|  | mask = ARIZONA_HP1L_SHRTO | ARIZONA_HP1L_FLWR | | 
|  | ARIZONA_HP1L_SHRTI; | 
|  | if (clamp) { | 
|  | val = ARIZONA_HP1L_SHRTO; | 
|  | cap_sel = ARIZONA_TST_CAP_CLAMP; | 
|  | } else { | 
|  | val = ARIZONA_HP1L_FLWR | ARIZONA_HP1L_SHRTI; | 
|  | cap_sel = ARIZONA_TST_CAP_DEFAULT; | 
|  | } | 
|  |  | 
|  | ret = regmap_update_bits(arizona->regmap, | 
|  | ARIZONA_HP_TEST_CTRL_1, | 
|  | ARIZONA_HP1_TST_CAP_SEL_MASK, | 
|  | cap_sel); | 
|  | if (ret != 0) | 
|  | dev_warn(arizona->dev, | 
|  | "Failed to set TST_CAP_SEL: %d\n", ret); | 
|  | break; | 
|  | default: | 
|  | mask = ARIZONA_RMV_SHRT_HP1L; | 
|  | if (clamp) | 
|  | val = ARIZONA_RMV_SHRT_HP1L; | 
|  | break; | 
|  | } | 
|  |  | 
|  | snd_soc_dapm_mutex_lock(arizona->dapm); | 
|  |  | 
|  | arizona->hpdet_clamp = clamp; | 
|  |  | 
|  | /* Keep the HP output stages disabled while doing the clamp */ | 
|  | if (clamp) { | 
|  | ret = regmap_update_bits(arizona->regmap, | 
|  | ARIZONA_OUTPUT_ENABLES_1, | 
|  | ARIZONA_OUT1L_ENA | | 
|  | ARIZONA_OUT1R_ENA, 0); | 
|  | if (ret != 0) | 
|  | dev_warn(arizona->dev, | 
|  | "Failed to disable headphone outputs: %d\n", | 
|  | ret); | 
|  | } | 
|  |  | 
|  | if (mask) { | 
|  | ret = regmap_update_bits(arizona->regmap, ARIZONA_HP_CTRL_1L, | 
|  | mask, val); | 
|  | if (ret != 0) | 
|  | dev_warn(arizona->dev, "Failed to do clamp: %d\n", | 
|  | ret); | 
|  |  | 
|  | ret = regmap_update_bits(arizona->regmap, ARIZONA_HP_CTRL_1R, | 
|  | mask, val); | 
|  | if (ret != 0) | 
|  | dev_warn(arizona->dev, "Failed to do clamp: %d\n", | 
|  | ret); | 
|  | } | 
|  |  | 
|  | /* Restore the desired state while not doing the clamp */ | 
|  | if (!clamp) { | 
|  | ret = regmap_update_bits(arizona->regmap, | 
|  | ARIZONA_OUTPUT_ENABLES_1, | 
|  | ARIZONA_OUT1L_ENA | | 
|  | ARIZONA_OUT1R_ENA, arizona->hp_ena); | 
|  | if (ret != 0) | 
|  | dev_warn(arizona->dev, | 
|  | "Failed to restore headphone outputs: %d\n", | 
|  | ret); | 
|  | } | 
|  |  | 
|  | snd_soc_dapm_mutex_unlock(arizona->dapm); | 
|  | } | 
|  |  | 
|  | static void arizona_extcon_set_mode(struct arizona_extcon_info *info, int mode) | 
|  | { | 
|  | struct arizona *arizona = info->arizona; | 
|  |  | 
|  | mode %= info->micd_num_modes; | 
|  |  | 
|  | gpiod_set_value_cansleep(info->micd_pol_gpio, | 
|  | info->micd_modes[mode].gpio); | 
|  |  | 
|  | regmap_update_bits(arizona->regmap, ARIZONA_MIC_DETECT_1, | 
|  | ARIZONA_MICD_BIAS_SRC_MASK, | 
|  | info->micd_modes[mode].bias << | 
|  | ARIZONA_MICD_BIAS_SRC_SHIFT); | 
|  | regmap_update_bits(arizona->regmap, ARIZONA_ACCESSORY_DETECT_MODE_1, | 
|  | ARIZONA_ACCDET_SRC, info->micd_modes[mode].src); | 
|  |  | 
|  | info->micd_mode = mode; | 
|  |  | 
|  | dev_dbg(arizona->dev, "Set jack polarity to %d\n", mode); | 
|  | } | 
|  |  | 
|  | static const char *arizona_extcon_get_micbias(struct arizona_extcon_info *info) | 
|  | { | 
|  | switch (info->micd_modes[0].bias) { | 
|  | case 1: | 
|  | return "MICBIAS1"; | 
|  | case 2: | 
|  | return "MICBIAS2"; | 
|  | case 3: | 
|  | return "MICBIAS3"; | 
|  | default: | 
|  | return "MICVDD"; | 
|  | } | 
|  | } | 
|  |  | 
|  | static void arizona_extcon_pulse_micbias(struct arizona_extcon_info *info) | 
|  | { | 
|  | struct arizona *arizona = info->arizona; | 
|  | const char *widget = arizona_extcon_get_micbias(info); | 
|  | struct snd_soc_dapm_context *dapm = arizona->dapm; | 
|  | struct snd_soc_component *component = snd_soc_dapm_to_component(dapm); | 
|  | int ret; | 
|  |  | 
|  | ret = snd_soc_component_force_enable_pin(component, widget); | 
|  | if (ret != 0) | 
|  | dev_warn(arizona->dev, "Failed to enable %s: %d\n", | 
|  | widget, ret); | 
|  |  | 
|  | snd_soc_dapm_sync(dapm); | 
|  |  | 
|  | if (!arizona->pdata.micd_force_micbias) { | 
|  | ret = snd_soc_component_disable_pin(component, widget); | 
|  | if (ret != 0) | 
|  | dev_warn(arizona->dev, "Failed to disable %s: %d\n", | 
|  | widget, ret); | 
|  |  | 
|  | snd_soc_dapm_sync(dapm); | 
|  | } | 
|  | } | 
|  |  | 
|  | static void arizona_start_mic(struct arizona_extcon_info *info) | 
|  | { | 
|  | struct arizona *arizona = info->arizona; | 
|  | bool change; | 
|  | int ret; | 
|  | unsigned int mode; | 
|  |  | 
|  | /* Microphone detection can't use idle mode */ | 
|  | pm_runtime_get(info->dev); | 
|  |  | 
|  | if (info->detecting) { | 
|  | ret = regulator_allow_bypass(info->micvdd, false); | 
|  | if (ret != 0) { | 
|  | dev_err(arizona->dev, | 
|  | "Failed to regulate MICVDD: %d\n", | 
|  | ret); | 
|  | } | 
|  | } | 
|  |  | 
|  | ret = regulator_enable(info->micvdd); | 
|  | if (ret != 0) { | 
|  | dev_err(arizona->dev, "Failed to enable MICVDD: %d\n", | 
|  | ret); | 
|  | } | 
|  |  | 
|  | if (info->micd_reva) { | 
|  | regmap_write(arizona->regmap, 0x80, 0x3); | 
|  | regmap_write(arizona->regmap, 0x294, 0); | 
|  | regmap_write(arizona->regmap, 0x80, 0x0); | 
|  | } | 
|  |  | 
|  | if (info->detecting && arizona->pdata.micd_software_compare) | 
|  | mode = ARIZONA_ACCDET_MODE_ADC; | 
|  | else | 
|  | mode = ARIZONA_ACCDET_MODE_MIC; | 
|  |  | 
|  | regmap_update_bits(arizona->regmap, | 
|  | ARIZONA_ACCESSORY_DETECT_MODE_1, | 
|  | ARIZONA_ACCDET_MODE_MASK, mode); | 
|  |  | 
|  | arizona_extcon_pulse_micbias(info); | 
|  |  | 
|  | regmap_update_bits_check(arizona->regmap, ARIZONA_MIC_DETECT_1, | 
|  | ARIZONA_MICD_ENA, ARIZONA_MICD_ENA, | 
|  | &change); | 
|  | if (!change) { | 
|  | regulator_disable(info->micvdd); | 
|  | pm_runtime_put_autosuspend(info->dev); | 
|  | } | 
|  | } | 
|  |  | 
|  | static void arizona_stop_mic(struct arizona_extcon_info *info) | 
|  | { | 
|  | struct arizona *arizona = info->arizona; | 
|  | const char *widget = arizona_extcon_get_micbias(info); | 
|  | struct snd_soc_dapm_context *dapm = arizona->dapm; | 
|  | struct snd_soc_component *component = snd_soc_dapm_to_component(dapm); | 
|  | bool change; | 
|  | int ret; | 
|  |  | 
|  | regmap_update_bits_check(arizona->regmap, ARIZONA_MIC_DETECT_1, | 
|  | ARIZONA_MICD_ENA, 0, | 
|  | &change); | 
|  |  | 
|  | ret = snd_soc_component_disable_pin(component, widget); | 
|  | if (ret != 0) | 
|  | dev_warn(arizona->dev, | 
|  | "Failed to disable %s: %d\n", | 
|  | widget, ret); | 
|  |  | 
|  | snd_soc_dapm_sync(dapm); | 
|  |  | 
|  | if (info->micd_reva) { | 
|  | regmap_write(arizona->regmap, 0x80, 0x3); | 
|  | regmap_write(arizona->regmap, 0x294, 2); | 
|  | regmap_write(arizona->regmap, 0x80, 0x0); | 
|  | } | 
|  |  | 
|  | ret = regulator_allow_bypass(info->micvdd, true); | 
|  | if (ret != 0) { | 
|  | dev_err(arizona->dev, "Failed to bypass MICVDD: %d\n", | 
|  | ret); | 
|  | } | 
|  |  | 
|  | if (change) { | 
|  | regulator_disable(info->micvdd); | 
|  | pm_runtime_mark_last_busy(info->dev); | 
|  | pm_runtime_put_autosuspend(info->dev); | 
|  | } | 
|  | } | 
|  |  | 
|  | static struct { | 
|  | unsigned int threshold; | 
|  | unsigned int factor_a; | 
|  | unsigned int factor_b; | 
|  | } arizona_hpdet_b_ranges[] = { | 
|  | { 100,  5528,   362464 }, | 
|  | { 169, 11084,  6186851 }, | 
|  | { 169, 11065, 65460395 }, | 
|  | }; | 
|  |  | 
|  | #define ARIZONA_HPDET_B_RANGE_MAX 0x3fb | 
|  |  | 
|  | static struct { | 
|  | int min; | 
|  | int max; | 
|  | } arizona_hpdet_c_ranges[] = { | 
|  | { 0,       30 }, | 
|  | { 8,      100 }, | 
|  | { 100,   1000 }, | 
|  | { 1000, 10000 }, | 
|  | }; | 
|  |  | 
|  | static int arizona_hpdet_read(struct arizona_extcon_info *info) | 
|  | { | 
|  | struct arizona *arizona = info->arizona; | 
|  | unsigned int val, range; | 
|  | int ret; | 
|  |  | 
|  | ret = regmap_read(arizona->regmap, ARIZONA_HEADPHONE_DETECT_2, &val); | 
|  | if (ret != 0) { | 
|  | dev_err(arizona->dev, "Failed to read HPDET status: %d\n", | 
|  | ret); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | switch (info->hpdet_ip_version) { | 
|  | case 0: | 
|  | if (!(val & ARIZONA_HP_DONE)) { | 
|  | dev_err(arizona->dev, "HPDET did not complete: %x\n", | 
|  | val); | 
|  | return -EAGAIN; | 
|  | } | 
|  |  | 
|  | val &= ARIZONA_HP_LVL_MASK; | 
|  | break; | 
|  |  | 
|  | case 1: | 
|  | if (!(val & ARIZONA_HP_DONE_B)) { | 
|  | dev_err(arizona->dev, "HPDET did not complete: %x\n", | 
|  | val); | 
|  | return -EAGAIN; | 
|  | } | 
|  |  | 
|  | ret = regmap_read(arizona->regmap, ARIZONA_HP_DACVAL, &val); | 
|  | if (ret != 0) { | 
|  | dev_err(arizona->dev, "Failed to read HP value: %d\n", | 
|  | ret); | 
|  | return -EAGAIN; | 
|  | } | 
|  |  | 
|  | regmap_read(arizona->regmap, ARIZONA_HEADPHONE_DETECT_1, | 
|  | &range); | 
|  | range = (range & ARIZONA_HP_IMPEDANCE_RANGE_MASK) | 
|  | >> ARIZONA_HP_IMPEDANCE_RANGE_SHIFT; | 
|  |  | 
|  | if (range < ARRAY_SIZE(arizona_hpdet_b_ranges) - 1 && | 
|  | (val < arizona_hpdet_b_ranges[range].threshold || | 
|  | val >= ARIZONA_HPDET_B_RANGE_MAX)) { | 
|  | range++; | 
|  | dev_dbg(arizona->dev, "Moving to HPDET range %d\n", | 
|  | range); | 
|  | regmap_update_bits(arizona->regmap, | 
|  | ARIZONA_HEADPHONE_DETECT_1, | 
|  | ARIZONA_HP_IMPEDANCE_RANGE_MASK, | 
|  | range << | 
|  | ARIZONA_HP_IMPEDANCE_RANGE_SHIFT); | 
|  | return -EAGAIN; | 
|  | } | 
|  |  | 
|  | /* If we go out of range report top of range */ | 
|  | if (val < arizona_hpdet_b_ranges[range].threshold || | 
|  | val >= ARIZONA_HPDET_B_RANGE_MAX) { | 
|  | dev_dbg(arizona->dev, "Measurement out of range\n"); | 
|  | return ARIZONA_HPDET_MAX; | 
|  | } | 
|  |  | 
|  | dev_dbg(arizona->dev, "HPDET read %d in range %d\n", | 
|  | val, range); | 
|  |  | 
|  | val = arizona_hpdet_b_ranges[range].factor_b | 
|  | / ((val * 100) - | 
|  | arizona_hpdet_b_ranges[range].factor_a); | 
|  | break; | 
|  |  | 
|  | case 2: | 
|  | if (!(val & ARIZONA_HP_DONE_B)) { | 
|  | dev_err(arizona->dev, "HPDET did not complete: %x\n", | 
|  | val); | 
|  | return -EAGAIN; | 
|  | } | 
|  |  | 
|  | val &= ARIZONA_HP_LVL_B_MASK; | 
|  | /* Convert to ohms, the value is in 0.5 ohm increments */ | 
|  | val /= 2; | 
|  |  | 
|  | regmap_read(arizona->regmap, ARIZONA_HEADPHONE_DETECT_1, | 
|  | &range); | 
|  | range = (range & ARIZONA_HP_IMPEDANCE_RANGE_MASK) | 
|  | >> ARIZONA_HP_IMPEDANCE_RANGE_SHIFT; | 
|  |  | 
|  | /* Skip up a range, or report? */ | 
|  | if (range < ARRAY_SIZE(arizona_hpdet_c_ranges) - 1 && | 
|  | (val >= arizona_hpdet_c_ranges[range].max)) { | 
|  | range++; | 
|  | dev_dbg(arizona->dev, "Moving to HPDET range %d-%d\n", | 
|  | arizona_hpdet_c_ranges[range].min, | 
|  | arizona_hpdet_c_ranges[range].max); | 
|  | regmap_update_bits(arizona->regmap, | 
|  | ARIZONA_HEADPHONE_DETECT_1, | 
|  | ARIZONA_HP_IMPEDANCE_RANGE_MASK, | 
|  | range << | 
|  | ARIZONA_HP_IMPEDANCE_RANGE_SHIFT); | 
|  | return -EAGAIN; | 
|  | } | 
|  |  | 
|  | if (range && (val < arizona_hpdet_c_ranges[range].min)) { | 
|  | dev_dbg(arizona->dev, "Reporting range boundary %d\n", | 
|  | arizona_hpdet_c_ranges[range].min); | 
|  | val = arizona_hpdet_c_ranges[range].min; | 
|  | } | 
|  | break; | 
|  |  | 
|  | default: | 
|  | dev_warn(arizona->dev, "Unknown HPDET IP revision %d\n", | 
|  | info->hpdet_ip_version); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | dev_dbg(arizona->dev, "HP impedance %d ohms\n", val); | 
|  | return val; | 
|  | } | 
|  |  | 
|  | static int arizona_hpdet_do_id(struct arizona_extcon_info *info, int *reading, | 
|  | bool *mic) | 
|  | { | 
|  | struct arizona *arizona = info->arizona; | 
|  | int id_gpio = arizona->pdata.hpdet_id_gpio; | 
|  |  | 
|  | /* | 
|  | * If we're using HPDET for accessory identification we need | 
|  | * to take multiple measurements, step through them in sequence. | 
|  | */ | 
|  | if (arizona->pdata.hpdet_acc_id) { | 
|  | info->hpdet_res[info->num_hpdet_res++] = *reading; | 
|  |  | 
|  | /* Only check the mic directly if we didn't already ID it */ | 
|  | if (id_gpio && info->num_hpdet_res == 1) { | 
|  | dev_dbg(arizona->dev, "Measuring mic\n"); | 
|  |  | 
|  | regmap_update_bits(arizona->regmap, | 
|  | ARIZONA_ACCESSORY_DETECT_MODE_1, | 
|  | ARIZONA_ACCDET_MODE_MASK | | 
|  | ARIZONA_ACCDET_SRC, | 
|  | ARIZONA_ACCDET_MODE_HPR | | 
|  | info->micd_modes[0].src); | 
|  |  | 
|  | gpio_set_value_cansleep(id_gpio, 1); | 
|  |  | 
|  | regmap_update_bits(arizona->regmap, | 
|  | ARIZONA_HEADPHONE_DETECT_1, | 
|  | ARIZONA_HP_POLL, ARIZONA_HP_POLL); | 
|  | return -EAGAIN; | 
|  | } | 
|  |  | 
|  | /* OK, got both.  Now, compare... */ | 
|  | dev_dbg(arizona->dev, "HPDET measured %d %d\n", | 
|  | info->hpdet_res[0], info->hpdet_res[1]); | 
|  |  | 
|  | /* Take the headphone impedance for the main report */ | 
|  | *reading = info->hpdet_res[0]; | 
|  |  | 
|  | /* Sometimes we get false readings due to slow insert */ | 
|  | if (*reading >= ARIZONA_HPDET_MAX && !info->hpdet_retried) { | 
|  | dev_dbg(arizona->dev, "Retrying high impedance\n"); | 
|  | info->num_hpdet_res = 0; | 
|  | info->hpdet_retried = true; | 
|  | arizona_start_hpdet_acc_id(info); | 
|  | pm_runtime_put(info->dev); | 
|  | return -EAGAIN; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * If we measure the mic as high impedance | 
|  | */ | 
|  | if (!id_gpio || info->hpdet_res[1] > 50) { | 
|  | dev_dbg(arizona->dev, "Detected mic\n"); | 
|  | *mic = true; | 
|  | info->detecting = true; | 
|  | } else { | 
|  | dev_dbg(arizona->dev, "Detected headphone\n"); | 
|  | } | 
|  |  | 
|  | /* Make sure everything is reset back to the real polarity */ | 
|  | regmap_update_bits(arizona->regmap, | 
|  | ARIZONA_ACCESSORY_DETECT_MODE_1, | 
|  | ARIZONA_ACCDET_SRC, | 
|  | info->micd_modes[0].src); | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static irqreturn_t arizona_hpdet_irq(int irq, void *data) | 
|  | { | 
|  | struct arizona_extcon_info *info = data; | 
|  | struct arizona *arizona = info->arizona; | 
|  | int id_gpio = arizona->pdata.hpdet_id_gpio; | 
|  | unsigned int report = EXTCON_JACK_HEADPHONE; | 
|  | int ret, reading; | 
|  | bool mic = false; | 
|  |  | 
|  | mutex_lock(&info->lock); | 
|  |  | 
|  | /* If we got a spurious IRQ for some reason then ignore it */ | 
|  | if (!info->hpdet_active) { | 
|  | dev_warn(arizona->dev, "Spurious HPDET IRQ\n"); | 
|  | mutex_unlock(&info->lock); | 
|  | return IRQ_NONE; | 
|  | } | 
|  |  | 
|  | /* If the cable was removed while measuring ignore the result */ | 
|  | ret = extcon_get_state(info->edev, EXTCON_MECHANICAL); | 
|  | if (ret < 0) { | 
|  | dev_err(arizona->dev, "Failed to check cable state: %d\n", | 
|  | ret); | 
|  | goto out; | 
|  | } else if (!ret) { | 
|  | dev_dbg(arizona->dev, "Ignoring HPDET for removed cable\n"); | 
|  | goto done; | 
|  | } | 
|  |  | 
|  | ret = arizona_hpdet_read(info); | 
|  | if (ret == -EAGAIN) | 
|  | goto out; | 
|  | else if (ret < 0) | 
|  | goto done; | 
|  | reading = ret; | 
|  |  | 
|  | /* Reset back to starting range */ | 
|  | regmap_update_bits(arizona->regmap, | 
|  | ARIZONA_HEADPHONE_DETECT_1, | 
|  | ARIZONA_HP_IMPEDANCE_RANGE_MASK | ARIZONA_HP_POLL, | 
|  | 0); | 
|  |  | 
|  | ret = arizona_hpdet_do_id(info, &reading, &mic); | 
|  | if (ret == -EAGAIN) | 
|  | goto out; | 
|  | else if (ret < 0) | 
|  | goto done; | 
|  |  | 
|  | /* Report high impedence cables as line outputs */ | 
|  | if (reading >= 5000) | 
|  | report = EXTCON_JACK_LINE_OUT; | 
|  | else | 
|  | report = EXTCON_JACK_HEADPHONE; | 
|  |  | 
|  | ret = extcon_set_state_sync(info->edev, report, true); | 
|  | if (ret != 0) | 
|  | dev_err(arizona->dev, "Failed to report HP/line: %d\n", | 
|  | ret); | 
|  |  | 
|  | done: | 
|  | /* Reset back to starting range */ | 
|  | regmap_update_bits(arizona->regmap, | 
|  | ARIZONA_HEADPHONE_DETECT_1, | 
|  | ARIZONA_HP_IMPEDANCE_RANGE_MASK | ARIZONA_HP_POLL, | 
|  | 0); | 
|  |  | 
|  | arizona_extcon_hp_clamp(info, false); | 
|  |  | 
|  | if (id_gpio) | 
|  | gpio_set_value_cansleep(id_gpio, 0); | 
|  |  | 
|  | /* Revert back to MICDET mode */ | 
|  | regmap_update_bits(arizona->regmap, | 
|  | ARIZONA_ACCESSORY_DETECT_MODE_1, | 
|  | ARIZONA_ACCDET_MODE_MASK, ARIZONA_ACCDET_MODE_MIC); | 
|  |  | 
|  | /* If we have a mic then reenable MICDET */ | 
|  | if (mic || info->mic) | 
|  | arizona_start_mic(info); | 
|  |  | 
|  | if (info->hpdet_active) { | 
|  | pm_runtime_put_autosuspend(info->dev); | 
|  | info->hpdet_active = false; | 
|  | } | 
|  |  | 
|  | info->hpdet_done = true; | 
|  |  | 
|  | out: | 
|  | mutex_unlock(&info->lock); | 
|  |  | 
|  | return IRQ_HANDLED; | 
|  | } | 
|  |  | 
|  | static void arizona_identify_headphone(struct arizona_extcon_info *info) | 
|  | { | 
|  | struct arizona *arizona = info->arizona; | 
|  | int ret; | 
|  |  | 
|  | if (info->hpdet_done) | 
|  | return; | 
|  |  | 
|  | dev_dbg(arizona->dev, "Starting HPDET\n"); | 
|  |  | 
|  | /* Make sure we keep the device enabled during the measurement */ | 
|  | pm_runtime_get(info->dev); | 
|  |  | 
|  | info->hpdet_active = true; | 
|  |  | 
|  | if (info->mic) | 
|  | arizona_stop_mic(info); | 
|  |  | 
|  | arizona_extcon_hp_clamp(info, true); | 
|  |  | 
|  | ret = regmap_update_bits(arizona->regmap, | 
|  | ARIZONA_ACCESSORY_DETECT_MODE_1, | 
|  | ARIZONA_ACCDET_MODE_MASK, | 
|  | arizona->pdata.hpdet_channel); | 
|  | if (ret != 0) { | 
|  | dev_err(arizona->dev, "Failed to set HPDET mode: %d\n", ret); | 
|  | goto err; | 
|  | } | 
|  |  | 
|  | ret = regmap_update_bits(arizona->regmap, ARIZONA_HEADPHONE_DETECT_1, | 
|  | ARIZONA_HP_POLL, ARIZONA_HP_POLL); | 
|  | if (ret != 0) { | 
|  | dev_err(arizona->dev, "Can't start HPDETL measurement: %d\n", | 
|  | ret); | 
|  | goto err; | 
|  | } | 
|  |  | 
|  | return; | 
|  |  | 
|  | err: | 
|  | regmap_update_bits(arizona->regmap, ARIZONA_ACCESSORY_DETECT_MODE_1, | 
|  | ARIZONA_ACCDET_MODE_MASK, ARIZONA_ACCDET_MODE_MIC); | 
|  |  | 
|  | /* Just report headphone */ | 
|  | ret = extcon_set_state_sync(info->edev, EXTCON_JACK_HEADPHONE, true); | 
|  | if (ret != 0) | 
|  | dev_err(arizona->dev, "Failed to report headphone: %d\n", ret); | 
|  |  | 
|  | if (info->mic) | 
|  | arizona_start_mic(info); | 
|  |  | 
|  | info->hpdet_active = false; | 
|  | } | 
|  |  | 
|  | static void arizona_start_hpdet_acc_id(struct arizona_extcon_info *info) | 
|  | { | 
|  | struct arizona *arizona = info->arizona; | 
|  | int hp_reading = 32; | 
|  | bool mic; | 
|  | int ret; | 
|  |  | 
|  | dev_dbg(arizona->dev, "Starting identification via HPDET\n"); | 
|  |  | 
|  | /* Make sure we keep the device enabled during the measurement */ | 
|  | pm_runtime_get_sync(info->dev); | 
|  |  | 
|  | info->hpdet_active = true; | 
|  |  | 
|  | arizona_extcon_hp_clamp(info, true); | 
|  |  | 
|  | ret = regmap_update_bits(arizona->regmap, | 
|  | ARIZONA_ACCESSORY_DETECT_MODE_1, | 
|  | ARIZONA_ACCDET_SRC | ARIZONA_ACCDET_MODE_MASK, | 
|  | info->micd_modes[0].src | | 
|  | arizona->pdata.hpdet_channel); | 
|  | if (ret != 0) { | 
|  | dev_err(arizona->dev, "Failed to set HPDET mode: %d\n", ret); | 
|  | goto err; | 
|  | } | 
|  |  | 
|  | if (arizona->pdata.hpdet_acc_id_line) { | 
|  | ret = regmap_update_bits(arizona->regmap, | 
|  | ARIZONA_HEADPHONE_DETECT_1, | 
|  | ARIZONA_HP_POLL, ARIZONA_HP_POLL); | 
|  | if (ret != 0) { | 
|  | dev_err(arizona->dev, | 
|  | "Can't start HPDETL measurement: %d\n", | 
|  | ret); | 
|  | goto err; | 
|  | } | 
|  | } else { | 
|  | arizona_hpdet_do_id(info, &hp_reading, &mic); | 
|  | } | 
|  |  | 
|  | return; | 
|  |  | 
|  | err: | 
|  | regmap_update_bits(arizona->regmap, ARIZONA_ACCESSORY_DETECT_MODE_1, | 
|  | ARIZONA_ACCDET_MODE_MASK, ARIZONA_ACCDET_MODE_MIC); | 
|  |  | 
|  | /* Just report headphone */ | 
|  | ret = extcon_set_state_sync(info->edev, EXTCON_JACK_HEADPHONE, true); | 
|  | if (ret != 0) | 
|  | dev_err(arizona->dev, "Failed to report headphone: %d\n", ret); | 
|  |  | 
|  | info->hpdet_active = false; | 
|  | } | 
|  |  | 
|  | static void arizona_micd_timeout_work(struct work_struct *work) | 
|  | { | 
|  | struct arizona_extcon_info *info = container_of(work, | 
|  | struct arizona_extcon_info, | 
|  | micd_timeout_work.work); | 
|  |  | 
|  | mutex_lock(&info->lock); | 
|  |  | 
|  | dev_dbg(info->arizona->dev, "MICD timed out, reporting HP\n"); | 
|  |  | 
|  | info->detecting = false; | 
|  |  | 
|  | arizona_identify_headphone(info); | 
|  |  | 
|  | arizona_stop_mic(info); | 
|  |  | 
|  | mutex_unlock(&info->lock); | 
|  | } | 
|  |  | 
|  | static void arizona_micd_detect(struct work_struct *work) | 
|  | { | 
|  | struct arizona_extcon_info *info = container_of(work, | 
|  | struct arizona_extcon_info, | 
|  | micd_detect_work.work); | 
|  | struct arizona *arizona = info->arizona; | 
|  | unsigned int val = 0, lvl; | 
|  | int ret, i, key; | 
|  |  | 
|  | cancel_delayed_work_sync(&info->micd_timeout_work); | 
|  |  | 
|  | mutex_lock(&info->lock); | 
|  |  | 
|  | /* If the cable was removed while measuring ignore the result */ | 
|  | ret = extcon_get_state(info->edev, EXTCON_MECHANICAL); | 
|  | if (ret < 0) { | 
|  | dev_err(arizona->dev, "Failed to check cable state: %d\n", | 
|  | ret); | 
|  | mutex_unlock(&info->lock); | 
|  | return; | 
|  | } else if (!ret) { | 
|  | dev_dbg(arizona->dev, "Ignoring MICDET for removed cable\n"); | 
|  | mutex_unlock(&info->lock); | 
|  | return; | 
|  | } | 
|  |  | 
|  | if (info->detecting && arizona->pdata.micd_software_compare) { | 
|  | /* Must disable MICD before we read the ADCVAL */ | 
|  | regmap_update_bits(arizona->regmap, ARIZONA_MIC_DETECT_1, | 
|  | ARIZONA_MICD_ENA, 0); | 
|  | ret = regmap_read(arizona->regmap, ARIZONA_MIC_DETECT_4, &val); | 
|  | if (ret != 0) { | 
|  | dev_err(arizona->dev, | 
|  | "Failed to read MICDET_ADCVAL: %d\n", | 
|  | ret); | 
|  | mutex_unlock(&info->lock); | 
|  | return; | 
|  | } | 
|  |  | 
|  | dev_dbg(arizona->dev, "MICDET_ADCVAL: %x\n", val); | 
|  |  | 
|  | val &= ARIZONA_MICDET_ADCVAL_MASK; | 
|  | if (val < ARRAY_SIZE(arizona_micd_levels)) | 
|  | val = arizona_micd_levels[val]; | 
|  | else | 
|  | val = INT_MAX; | 
|  |  | 
|  | if (val <= QUICK_HEADPHONE_MAX_OHM) | 
|  | val = ARIZONA_MICD_STS | ARIZONA_MICD_LVL_0; | 
|  | else if (val <= MICROPHONE_MIN_OHM) | 
|  | val = ARIZONA_MICD_STS | ARIZONA_MICD_LVL_1; | 
|  | else if (val <= MICROPHONE_MAX_OHM) | 
|  | val = ARIZONA_MICD_STS | ARIZONA_MICD_LVL_8; | 
|  | else | 
|  | val = ARIZONA_MICD_LVL_8; | 
|  | } | 
|  |  | 
|  | for (i = 0; i < 10 && !(val & MICD_LVL_0_TO_8); i++) { | 
|  | ret = regmap_read(arizona->regmap, ARIZONA_MIC_DETECT_3, &val); | 
|  | if (ret != 0) { | 
|  | dev_err(arizona->dev, | 
|  | "Failed to read MICDET: %d\n", ret); | 
|  | mutex_unlock(&info->lock); | 
|  | return; | 
|  | } | 
|  |  | 
|  | dev_dbg(arizona->dev, "MICDET: %x\n", val); | 
|  |  | 
|  | if (!(val & ARIZONA_MICD_VALID)) { | 
|  | dev_warn(arizona->dev, | 
|  | "Microphone detection state invalid\n"); | 
|  | mutex_unlock(&info->lock); | 
|  | return; | 
|  | } | 
|  | } | 
|  |  | 
|  | if (i == 10 && !(val & MICD_LVL_0_TO_8)) { | 
|  | dev_err(arizona->dev, "Failed to get valid MICDET value\n"); | 
|  | mutex_unlock(&info->lock); | 
|  | return; | 
|  | } | 
|  |  | 
|  | /* Due to jack detect this should never happen */ | 
|  | if (!(val & ARIZONA_MICD_STS)) { | 
|  | dev_warn(arizona->dev, "Detected open circuit\n"); | 
|  | info->mic = false; | 
|  | arizona_stop_mic(info); | 
|  | info->detecting = false; | 
|  | arizona_identify_headphone(info); | 
|  | goto handled; | 
|  | } | 
|  |  | 
|  | /* If we got a high impedence we should have a headset, report it. */ | 
|  | if (info->detecting && (val & ARIZONA_MICD_LVL_8)) { | 
|  | info->mic = true; | 
|  | info->detecting = false; | 
|  |  | 
|  | arizona_identify_headphone(info); | 
|  |  | 
|  | ret = extcon_set_state_sync(info->edev, | 
|  | EXTCON_JACK_MICROPHONE, true); | 
|  | if (ret != 0) | 
|  | dev_err(arizona->dev, "Headset report failed: %d\n", | 
|  | ret); | 
|  |  | 
|  | /* Don't need to regulate for button detection */ | 
|  | ret = regulator_allow_bypass(info->micvdd, true); | 
|  | if (ret != 0) { | 
|  | dev_err(arizona->dev, "Failed to bypass MICVDD: %d\n", | 
|  | ret); | 
|  | } | 
|  |  | 
|  | goto handled; | 
|  | } | 
|  |  | 
|  | /* If we detected a lower impedence during initial startup | 
|  | * then we probably have the wrong polarity, flip it.  Don't | 
|  | * do this for the lowest impedences to speed up detection of | 
|  | * plain headphones.  If both polarities report a low | 
|  | * impedence then give up and report headphones. | 
|  | */ | 
|  | if (info->detecting && (val & MICD_LVL_1_TO_7)) { | 
|  | if (info->jack_flips >= info->micd_num_modes * 10) { | 
|  | dev_dbg(arizona->dev, "Detected HP/line\n"); | 
|  |  | 
|  | info->detecting = false; | 
|  |  | 
|  | arizona_identify_headphone(info); | 
|  |  | 
|  | arizona_stop_mic(info); | 
|  | } else { | 
|  | info->micd_mode++; | 
|  | if (info->micd_mode == info->micd_num_modes) | 
|  | info->micd_mode = 0; | 
|  | arizona_extcon_set_mode(info, info->micd_mode); | 
|  |  | 
|  | info->jack_flips++; | 
|  | } | 
|  |  | 
|  | goto handled; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * If we're still detecting and we detect a short then we've | 
|  | * got a headphone.  Otherwise it's a button press. | 
|  | */ | 
|  | if (val & MICD_LVL_0_TO_7) { | 
|  | if (info->mic) { | 
|  | dev_dbg(arizona->dev, "Mic button detected\n"); | 
|  |  | 
|  | lvl = val & ARIZONA_MICD_LVL_MASK; | 
|  | lvl >>= ARIZONA_MICD_LVL_SHIFT; | 
|  |  | 
|  | for (i = 0; i < info->num_micd_ranges; i++) | 
|  | input_report_key(info->input, | 
|  | info->micd_ranges[i].key, 0); | 
|  |  | 
|  | WARN_ON(!lvl); | 
|  | WARN_ON(ffs(lvl) - 1 >= info->num_micd_ranges); | 
|  | if (lvl && ffs(lvl) - 1 < info->num_micd_ranges) { | 
|  | key = info->micd_ranges[ffs(lvl) - 1].key; | 
|  | input_report_key(info->input, key, 1); | 
|  | input_sync(info->input); | 
|  | } | 
|  |  | 
|  | } else if (info->detecting) { | 
|  | dev_dbg(arizona->dev, "Headphone detected\n"); | 
|  | info->detecting = false; | 
|  | arizona_stop_mic(info); | 
|  |  | 
|  | arizona_identify_headphone(info); | 
|  | } else { | 
|  | dev_warn(arizona->dev, "Button with no mic: %x\n", | 
|  | val); | 
|  | } | 
|  | } else { | 
|  | dev_dbg(arizona->dev, "Mic button released\n"); | 
|  | for (i = 0; i < info->num_micd_ranges; i++) | 
|  | input_report_key(info->input, | 
|  | info->micd_ranges[i].key, 0); | 
|  | input_sync(info->input); | 
|  | arizona_extcon_pulse_micbias(info); | 
|  | } | 
|  |  | 
|  | handled: | 
|  | if (info->detecting) { | 
|  | if (arizona->pdata.micd_software_compare) | 
|  | regmap_update_bits(arizona->regmap, | 
|  | ARIZONA_MIC_DETECT_1, | 
|  | ARIZONA_MICD_ENA, | 
|  | ARIZONA_MICD_ENA); | 
|  |  | 
|  | queue_delayed_work(system_power_efficient_wq, | 
|  | &info->micd_timeout_work, | 
|  | msecs_to_jiffies(info->micd_timeout)); | 
|  | } | 
|  |  | 
|  | pm_runtime_mark_last_busy(info->dev); | 
|  | mutex_unlock(&info->lock); | 
|  | } | 
|  |  | 
|  | static irqreturn_t arizona_micdet(int irq, void *data) | 
|  | { | 
|  | struct arizona_extcon_info *info = data; | 
|  | struct arizona *arizona = info->arizona; | 
|  | int debounce = arizona->pdata.micd_detect_debounce; | 
|  |  | 
|  | cancel_delayed_work_sync(&info->micd_detect_work); | 
|  | cancel_delayed_work_sync(&info->micd_timeout_work); | 
|  |  | 
|  | mutex_lock(&info->lock); | 
|  | if (!info->detecting) | 
|  | debounce = 0; | 
|  | mutex_unlock(&info->lock); | 
|  |  | 
|  | if (debounce) | 
|  | queue_delayed_work(system_power_efficient_wq, | 
|  | &info->micd_detect_work, | 
|  | msecs_to_jiffies(debounce)); | 
|  | else | 
|  | arizona_micd_detect(&info->micd_detect_work.work); | 
|  |  | 
|  | return IRQ_HANDLED; | 
|  | } | 
|  |  | 
|  | static void arizona_hpdet_work(struct work_struct *work) | 
|  | { | 
|  | struct arizona_extcon_info *info = container_of(work, | 
|  | struct arizona_extcon_info, | 
|  | hpdet_work.work); | 
|  |  | 
|  | mutex_lock(&info->lock); | 
|  | arizona_start_hpdet_acc_id(info); | 
|  | mutex_unlock(&info->lock); | 
|  | } | 
|  |  | 
|  | static int arizona_hpdet_wait(struct arizona_extcon_info *info) | 
|  | { | 
|  | struct arizona *arizona = info->arizona; | 
|  | unsigned int val; | 
|  | int i, ret; | 
|  |  | 
|  | for (i = 0; i < ARIZONA_HPDET_WAIT_COUNT; i++) { | 
|  | ret = regmap_read(arizona->regmap, ARIZONA_HEADPHONE_DETECT_2, | 
|  | &val); | 
|  | if (ret) { | 
|  | dev_err(arizona->dev, | 
|  | "Failed to read HPDET state: %d\n", ret); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | switch (info->hpdet_ip_version) { | 
|  | case 0: | 
|  | if (val & ARIZONA_HP_DONE) | 
|  | return 0; | 
|  | break; | 
|  | default: | 
|  | if (val & ARIZONA_HP_DONE_B) | 
|  | return 0; | 
|  | break; | 
|  | } | 
|  |  | 
|  | msleep(ARIZONA_HPDET_WAIT_DELAY_MS); | 
|  | } | 
|  |  | 
|  | dev_warn(arizona->dev, "HPDET did not appear to complete\n"); | 
|  |  | 
|  | return -ETIMEDOUT; | 
|  | } | 
|  |  | 
|  | static irqreturn_t arizona_jackdet(int irq, void *data) | 
|  | { | 
|  | struct arizona_extcon_info *info = data; | 
|  | struct arizona *arizona = info->arizona; | 
|  | unsigned int val, present, mask; | 
|  | bool cancelled_hp, cancelled_mic; | 
|  | int ret, i; | 
|  |  | 
|  | cancelled_hp = cancel_delayed_work_sync(&info->hpdet_work); | 
|  | cancelled_mic = cancel_delayed_work_sync(&info->micd_timeout_work); | 
|  |  | 
|  | pm_runtime_get_sync(info->dev); | 
|  |  | 
|  | mutex_lock(&info->lock); | 
|  |  | 
|  | if (info->micd_clamp) { | 
|  | mask = ARIZONA_MICD_CLAMP_STS; | 
|  | present = 0; | 
|  | } else { | 
|  | mask = ARIZONA_JD1_STS; | 
|  | if (arizona->pdata.jd_invert) | 
|  | present = 0; | 
|  | else | 
|  | present = ARIZONA_JD1_STS; | 
|  | } | 
|  |  | 
|  | ret = regmap_read(arizona->regmap, ARIZONA_AOD_IRQ_RAW_STATUS, &val); | 
|  | if (ret != 0) { | 
|  | dev_err(arizona->dev, "Failed to read jackdet status: %d\n", | 
|  | ret); | 
|  | mutex_unlock(&info->lock); | 
|  | pm_runtime_put_autosuspend(info->dev); | 
|  | return IRQ_NONE; | 
|  | } | 
|  |  | 
|  | val &= mask; | 
|  | if (val == info->last_jackdet) { | 
|  | dev_dbg(arizona->dev, "Suppressing duplicate JACKDET\n"); | 
|  | if (cancelled_hp) | 
|  | queue_delayed_work(system_power_efficient_wq, | 
|  | &info->hpdet_work, | 
|  | msecs_to_jiffies(HPDET_DEBOUNCE)); | 
|  |  | 
|  | if (cancelled_mic) { | 
|  | int micd_timeout = info->micd_timeout; | 
|  |  | 
|  | queue_delayed_work(system_power_efficient_wq, | 
|  | &info->micd_timeout_work, | 
|  | msecs_to_jiffies(micd_timeout)); | 
|  | } | 
|  |  | 
|  | goto out; | 
|  | } | 
|  | info->last_jackdet = val; | 
|  |  | 
|  | if (info->last_jackdet == present) { | 
|  | dev_dbg(arizona->dev, "Detected jack\n"); | 
|  | ret = extcon_set_state_sync(info->edev, | 
|  | EXTCON_MECHANICAL, true); | 
|  |  | 
|  | if (ret != 0) | 
|  | dev_err(arizona->dev, "Mechanical report failed: %d\n", | 
|  | ret); | 
|  |  | 
|  | if (!arizona->pdata.hpdet_acc_id) { | 
|  | info->detecting = true; | 
|  | info->mic = false; | 
|  | info->jack_flips = 0; | 
|  |  | 
|  | arizona_start_mic(info); | 
|  | } else { | 
|  | queue_delayed_work(system_power_efficient_wq, | 
|  | &info->hpdet_work, | 
|  | msecs_to_jiffies(HPDET_DEBOUNCE)); | 
|  | } | 
|  |  | 
|  | if (info->micd_clamp || !arizona->pdata.jd_invert) | 
|  | regmap_update_bits(arizona->regmap, | 
|  | ARIZONA_JACK_DETECT_DEBOUNCE, | 
|  | ARIZONA_MICD_CLAMP_DB | | 
|  | ARIZONA_JD1_DB, 0); | 
|  | } else { | 
|  | dev_dbg(arizona->dev, "Detected jack removal\n"); | 
|  |  | 
|  | arizona_stop_mic(info); | 
|  |  | 
|  | info->num_hpdet_res = 0; | 
|  | for (i = 0; i < ARRAY_SIZE(info->hpdet_res); i++) | 
|  | info->hpdet_res[i] = 0; | 
|  | info->mic = false; | 
|  | info->hpdet_done = false; | 
|  | info->hpdet_retried = false; | 
|  |  | 
|  | for (i = 0; i < info->num_micd_ranges; i++) | 
|  | input_report_key(info->input, | 
|  | info->micd_ranges[i].key, 0); | 
|  | input_sync(info->input); | 
|  |  | 
|  | for (i = 0; i < ARRAY_SIZE(arizona_cable) - 1; i++) { | 
|  | ret = extcon_set_state_sync(info->edev, | 
|  | arizona_cable[i], false); | 
|  | if (ret != 0) | 
|  | dev_err(arizona->dev, | 
|  | "Removal report failed: %d\n", ret); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * If the jack was removed during a headphone detection we | 
|  | * need to wait for the headphone detection to finish, as | 
|  | * it can not be aborted. We don't want to be able to start | 
|  | * a new headphone detection from a fresh insert until this | 
|  | * one is finished. | 
|  | */ | 
|  | arizona_hpdet_wait(info); | 
|  |  | 
|  | regmap_update_bits(arizona->regmap, | 
|  | ARIZONA_JACK_DETECT_DEBOUNCE, | 
|  | ARIZONA_MICD_CLAMP_DB | ARIZONA_JD1_DB, | 
|  | ARIZONA_MICD_CLAMP_DB | ARIZONA_JD1_DB); | 
|  | } | 
|  |  | 
|  | if (arizona->pdata.micd_timeout) | 
|  | info->micd_timeout = arizona->pdata.micd_timeout; | 
|  | else | 
|  | info->micd_timeout = DEFAULT_MICD_TIMEOUT; | 
|  |  | 
|  | out: | 
|  | /* Clear trig_sts to make sure DCVDD is not forced up */ | 
|  | regmap_write(arizona->regmap, ARIZONA_AOD_WKUP_AND_TRIG, | 
|  | ARIZONA_MICD_CLAMP_FALL_TRIG_STS | | 
|  | ARIZONA_MICD_CLAMP_RISE_TRIG_STS | | 
|  | ARIZONA_JD1_FALL_TRIG_STS | | 
|  | ARIZONA_JD1_RISE_TRIG_STS); | 
|  |  | 
|  | mutex_unlock(&info->lock); | 
|  |  | 
|  | pm_runtime_mark_last_busy(info->dev); | 
|  | pm_runtime_put_autosuspend(info->dev); | 
|  |  | 
|  | return IRQ_HANDLED; | 
|  | } | 
|  |  | 
|  | /* Map a level onto a slot in the register bank */ | 
|  | static void arizona_micd_set_level(struct arizona *arizona, int index, | 
|  | unsigned int level) | 
|  | { | 
|  | int reg; | 
|  | unsigned int mask; | 
|  |  | 
|  | reg = ARIZONA_MIC_DETECT_LEVEL_4 - (index / 2); | 
|  |  | 
|  | if (!(index % 2)) { | 
|  | mask = 0x3f00; | 
|  | level <<= 8; | 
|  | } else { | 
|  | mask = 0x3f; | 
|  | } | 
|  |  | 
|  | /* Program the level itself */ | 
|  | regmap_update_bits(arizona->regmap, reg, mask, level); | 
|  | } | 
|  |  | 
|  | static int arizona_extcon_get_micd_configs(struct device *dev, | 
|  | struct arizona *arizona) | 
|  | { | 
|  | const char * const prop = "wlf,micd-configs"; | 
|  | const int entries_per_config = 3; | 
|  | struct arizona_micd_config *micd_configs; | 
|  | int nconfs, ret; | 
|  | int i, j; | 
|  | u32 *vals; | 
|  |  | 
|  | nconfs = device_property_read_u32_array(arizona->dev, prop, NULL, 0); | 
|  | if (nconfs <= 0) | 
|  | return 0; | 
|  |  | 
|  | vals = kcalloc(nconfs, sizeof(u32), GFP_KERNEL); | 
|  | if (!vals) | 
|  | return -ENOMEM; | 
|  |  | 
|  | ret = device_property_read_u32_array(arizona->dev, prop, vals, nconfs); | 
|  | if (ret < 0) | 
|  | goto out; | 
|  |  | 
|  | nconfs /= entries_per_config; | 
|  |  | 
|  | micd_configs = devm_kzalloc(dev, | 
|  | nconfs * sizeof(struct arizona_micd_range), | 
|  | GFP_KERNEL); | 
|  | if (!micd_configs) { | 
|  | ret = -ENOMEM; | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | for (i = 0, j = 0; i < nconfs; ++i) { | 
|  | micd_configs[i].src = vals[j++] ? ARIZONA_ACCDET_SRC : 0; | 
|  | micd_configs[i].bias = vals[j++]; | 
|  | micd_configs[i].gpio = vals[j++]; | 
|  | } | 
|  |  | 
|  | arizona->pdata.micd_configs = micd_configs; | 
|  | arizona->pdata.num_micd_configs = nconfs; | 
|  |  | 
|  | out: | 
|  | kfree(vals); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int arizona_extcon_device_get_pdata(struct device *dev, | 
|  | struct arizona *arizona) | 
|  | { | 
|  | struct arizona_pdata *pdata = &arizona->pdata; | 
|  | unsigned int val = ARIZONA_ACCDET_MODE_HPL; | 
|  | int ret; | 
|  |  | 
|  | device_property_read_u32(arizona->dev, "wlf,hpdet-channel", &val); | 
|  | switch (val) { | 
|  | case ARIZONA_ACCDET_MODE_HPL: | 
|  | case ARIZONA_ACCDET_MODE_HPR: | 
|  | pdata->hpdet_channel = val; | 
|  | break; | 
|  | default: | 
|  | dev_err(arizona->dev, | 
|  | "Wrong wlf,hpdet-channel DT value %d\n", val); | 
|  | pdata->hpdet_channel = ARIZONA_ACCDET_MODE_HPL; | 
|  | } | 
|  |  | 
|  | device_property_read_u32(arizona->dev, "wlf,micd-detect-debounce", | 
|  | &pdata->micd_detect_debounce); | 
|  |  | 
|  | device_property_read_u32(arizona->dev, "wlf,micd-bias-start-time", | 
|  | &pdata->micd_bias_start_time); | 
|  |  | 
|  | device_property_read_u32(arizona->dev, "wlf,micd-rate", | 
|  | &pdata->micd_rate); | 
|  |  | 
|  | device_property_read_u32(arizona->dev, "wlf,micd-dbtime", | 
|  | &pdata->micd_dbtime); | 
|  |  | 
|  | device_property_read_u32(arizona->dev, "wlf,micd-timeout-ms", | 
|  | &pdata->micd_timeout); | 
|  |  | 
|  | pdata->micd_force_micbias = device_property_read_bool(arizona->dev, | 
|  | "wlf,micd-force-micbias"); | 
|  |  | 
|  | pdata->micd_software_compare = device_property_read_bool(arizona->dev, | 
|  | "wlf,micd-software-compare"); | 
|  |  | 
|  | pdata->jd_invert = device_property_read_bool(arizona->dev, | 
|  | "wlf,jd-invert"); | 
|  |  | 
|  | device_property_read_u32(arizona->dev, "wlf,gpsw", &pdata->gpsw); | 
|  |  | 
|  | pdata->jd_gpio5 = device_property_read_bool(arizona->dev, | 
|  | "wlf,use-jd2"); | 
|  | pdata->jd_gpio5_nopull = device_property_read_bool(arizona->dev, | 
|  | "wlf,use-jd2-nopull"); | 
|  |  | 
|  | ret = arizona_extcon_get_micd_configs(dev, arizona); | 
|  | if (ret < 0) | 
|  | dev_err(arizona->dev, "Failed to read micd configs: %d\n", ret); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int arizona_extcon_probe(struct platform_device *pdev) | 
|  | { | 
|  | struct arizona *arizona = dev_get_drvdata(pdev->dev.parent); | 
|  | struct arizona_pdata *pdata = &arizona->pdata; | 
|  | struct arizona_extcon_info *info; | 
|  | unsigned int val; | 
|  | unsigned int clamp_mode; | 
|  | int jack_irq_fall, jack_irq_rise; | 
|  | int ret, mode, i, j; | 
|  |  | 
|  | if (!arizona->dapm || !arizona->dapm->card) | 
|  | return -EPROBE_DEFER; | 
|  |  | 
|  | info = devm_kzalloc(&pdev->dev, sizeof(*info), GFP_KERNEL); | 
|  | if (!info) | 
|  | return -ENOMEM; | 
|  |  | 
|  | if (!dev_get_platdata(arizona->dev)) | 
|  | arizona_extcon_device_get_pdata(&pdev->dev, arizona); | 
|  |  | 
|  | info->micvdd = devm_regulator_get(&pdev->dev, "MICVDD"); | 
|  | if (IS_ERR(info->micvdd)) { | 
|  | ret = PTR_ERR(info->micvdd); | 
|  | dev_err(arizona->dev, "Failed to get MICVDD: %d\n", ret); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | mutex_init(&info->lock); | 
|  | info->arizona = arizona; | 
|  | info->dev = &pdev->dev; | 
|  | info->last_jackdet = ~(ARIZONA_MICD_CLAMP_STS | ARIZONA_JD1_STS); | 
|  | INIT_DELAYED_WORK(&info->hpdet_work, arizona_hpdet_work); | 
|  | INIT_DELAYED_WORK(&info->micd_detect_work, arizona_micd_detect); | 
|  | INIT_DELAYED_WORK(&info->micd_timeout_work, arizona_micd_timeout_work); | 
|  | platform_set_drvdata(pdev, info); | 
|  |  | 
|  | switch (arizona->type) { | 
|  | case WM5102: | 
|  | switch (arizona->rev) { | 
|  | case 0: | 
|  | info->micd_reva = true; | 
|  | break; | 
|  | default: | 
|  | info->micd_clamp = true; | 
|  | info->hpdet_ip_version = 1; | 
|  | break; | 
|  | } | 
|  | break; | 
|  | case WM5110: | 
|  | case WM8280: | 
|  | switch (arizona->rev) { | 
|  | case 0 ... 2: | 
|  | break; | 
|  | default: | 
|  | info->micd_clamp = true; | 
|  | info->hpdet_ip_version = 2; | 
|  | break; | 
|  | } | 
|  | break; | 
|  | case WM8998: | 
|  | case WM1814: | 
|  | info->micd_clamp = true; | 
|  | info->hpdet_ip_version = 2; | 
|  | break; | 
|  | default: | 
|  | break; | 
|  | } | 
|  |  | 
|  | info->edev = devm_extcon_dev_allocate(&pdev->dev, arizona_cable); | 
|  | if (IS_ERR(info->edev)) { | 
|  | dev_err(&pdev->dev, "failed to allocate extcon device\n"); | 
|  | return -ENOMEM; | 
|  | } | 
|  |  | 
|  | ret = devm_extcon_dev_register(&pdev->dev, info->edev); | 
|  | if (ret < 0) { | 
|  | dev_err(arizona->dev, "extcon_dev_register() failed: %d\n", | 
|  | ret); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | info->input = devm_input_allocate_device(&pdev->dev); | 
|  | if (!info->input) { | 
|  | dev_err(arizona->dev, "Can't allocate input dev\n"); | 
|  | ret = -ENOMEM; | 
|  | goto err_register; | 
|  | } | 
|  |  | 
|  | info->input->name = "Headset"; | 
|  | info->input->phys = "arizona/extcon"; | 
|  |  | 
|  | if (pdata->num_micd_configs) { | 
|  | info->micd_modes = pdata->micd_configs; | 
|  | info->micd_num_modes = pdata->num_micd_configs; | 
|  | } else { | 
|  | info->micd_modes = micd_default_modes; | 
|  | info->micd_num_modes = ARRAY_SIZE(micd_default_modes); | 
|  | } | 
|  |  | 
|  | if (arizona->pdata.gpsw > 0) | 
|  | regmap_update_bits(arizona->regmap, ARIZONA_GP_SWITCH_1, | 
|  | ARIZONA_SW1_MODE_MASK, arizona->pdata.gpsw); | 
|  |  | 
|  | if (pdata->micd_pol_gpio > 0) { | 
|  | if (info->micd_modes[0].gpio) | 
|  | mode = GPIOF_OUT_INIT_HIGH; | 
|  | else | 
|  | mode = GPIOF_OUT_INIT_LOW; | 
|  |  | 
|  | ret = devm_gpio_request_one(&pdev->dev, pdata->micd_pol_gpio, | 
|  | mode, "MICD polarity"); | 
|  | if (ret != 0) { | 
|  | dev_err(arizona->dev, "Failed to request GPIO%d: %d\n", | 
|  | pdata->micd_pol_gpio, ret); | 
|  | goto err_register; | 
|  | } | 
|  |  | 
|  | info->micd_pol_gpio = gpio_to_desc(pdata->micd_pol_gpio); | 
|  | } else { | 
|  | if (info->micd_modes[0].gpio) | 
|  | mode = GPIOD_OUT_HIGH; | 
|  | else | 
|  | mode = GPIOD_OUT_LOW; | 
|  |  | 
|  | /* We can't use devm here because we need to do the get | 
|  | * against the MFD device, as that is where the of_node | 
|  | * will reside, but if we devm against that the GPIO | 
|  | * will not be freed if the extcon driver is unloaded. | 
|  | */ | 
|  | info->micd_pol_gpio = gpiod_get_optional(arizona->dev, | 
|  | "wlf,micd-pol", | 
|  | GPIOD_OUT_LOW); | 
|  | if (IS_ERR(info->micd_pol_gpio)) { | 
|  | ret = PTR_ERR(info->micd_pol_gpio); | 
|  | dev_err(arizona->dev, | 
|  | "Failed to get microphone polarity GPIO: %d\n", | 
|  | ret); | 
|  | goto err_register; | 
|  | } | 
|  | } | 
|  |  | 
|  | if (arizona->pdata.hpdet_id_gpio > 0) { | 
|  | ret = devm_gpio_request_one(&pdev->dev, | 
|  | arizona->pdata.hpdet_id_gpio, | 
|  | GPIOF_OUT_INIT_LOW, | 
|  | "HPDET"); | 
|  | if (ret != 0) { | 
|  | dev_err(arizona->dev, "Failed to request GPIO%d: %d\n", | 
|  | arizona->pdata.hpdet_id_gpio, ret); | 
|  | goto err_gpio; | 
|  | } | 
|  | } | 
|  |  | 
|  | if (arizona->pdata.micd_bias_start_time) | 
|  | regmap_update_bits(arizona->regmap, ARIZONA_MIC_DETECT_1, | 
|  | ARIZONA_MICD_BIAS_STARTTIME_MASK, | 
|  | arizona->pdata.micd_bias_start_time | 
|  | << ARIZONA_MICD_BIAS_STARTTIME_SHIFT); | 
|  |  | 
|  | if (arizona->pdata.micd_rate) | 
|  | regmap_update_bits(arizona->regmap, ARIZONA_MIC_DETECT_1, | 
|  | ARIZONA_MICD_RATE_MASK, | 
|  | arizona->pdata.micd_rate | 
|  | << ARIZONA_MICD_RATE_SHIFT); | 
|  |  | 
|  | switch (arizona->pdata.micd_dbtime) { | 
|  | case MICD_DBTIME_FOUR_READINGS: | 
|  | regmap_update_bits(arizona->regmap, ARIZONA_MIC_DETECT_1, | 
|  | ARIZONA_MICD_DBTIME_MASK, | 
|  | ARIZONA_MICD_DBTIME); | 
|  | break; | 
|  | case MICD_DBTIME_TWO_READINGS: | 
|  | regmap_update_bits(arizona->regmap, ARIZONA_MIC_DETECT_1, | 
|  | ARIZONA_MICD_DBTIME_MASK, 0); | 
|  | break; | 
|  | default: | 
|  | break; | 
|  | } | 
|  |  | 
|  | BUILD_BUG_ON(ARRAY_SIZE(arizona_micd_levels) < | 
|  | ARIZONA_NUM_MICD_BUTTON_LEVELS); | 
|  |  | 
|  | if (arizona->pdata.num_micd_ranges) { | 
|  | info->micd_ranges = pdata->micd_ranges; | 
|  | info->num_micd_ranges = pdata->num_micd_ranges; | 
|  | } else { | 
|  | info->micd_ranges = micd_default_ranges; | 
|  | info->num_micd_ranges = ARRAY_SIZE(micd_default_ranges); | 
|  | } | 
|  |  | 
|  | if (arizona->pdata.num_micd_ranges > ARIZONA_MAX_MICD_RANGE) { | 
|  | dev_err(arizona->dev, "Too many MICD ranges: %d\n", | 
|  | arizona->pdata.num_micd_ranges); | 
|  | } | 
|  |  | 
|  | if (info->num_micd_ranges > 1) { | 
|  | for (i = 1; i < info->num_micd_ranges; i++) { | 
|  | if (info->micd_ranges[i - 1].max > | 
|  | info->micd_ranges[i].max) { | 
|  | dev_err(arizona->dev, | 
|  | "MICD ranges must be sorted\n"); | 
|  | ret = -EINVAL; | 
|  | goto err_gpio; | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | /* Disable all buttons by default */ | 
|  | regmap_update_bits(arizona->regmap, ARIZONA_MIC_DETECT_2, | 
|  | ARIZONA_MICD_LVL_SEL_MASK, 0x81); | 
|  |  | 
|  | /* Set up all the buttons the user specified */ | 
|  | for (i = 0; i < info->num_micd_ranges; i++) { | 
|  | for (j = 0; j < ARIZONA_NUM_MICD_BUTTON_LEVELS; j++) | 
|  | if (arizona_micd_levels[j] >= info->micd_ranges[i].max) | 
|  | break; | 
|  |  | 
|  | if (j == ARIZONA_NUM_MICD_BUTTON_LEVELS) { | 
|  | dev_err(arizona->dev, "Unsupported MICD level %d\n", | 
|  | info->micd_ranges[i].max); | 
|  | ret = -EINVAL; | 
|  | goto err_gpio; | 
|  | } | 
|  |  | 
|  | dev_dbg(arizona->dev, "%d ohms for MICD threshold %d\n", | 
|  | arizona_micd_levels[j], i); | 
|  |  | 
|  | arizona_micd_set_level(arizona, i, j); | 
|  | input_set_capability(info->input, EV_KEY, | 
|  | info->micd_ranges[i].key); | 
|  |  | 
|  | /* Enable reporting of that range */ | 
|  | regmap_update_bits(arizona->regmap, ARIZONA_MIC_DETECT_2, | 
|  | 1 << i, 1 << i); | 
|  | } | 
|  |  | 
|  | /* Set all the remaining keys to a maximum */ | 
|  | for (; i < ARIZONA_MAX_MICD_RANGE; i++) | 
|  | arizona_micd_set_level(arizona, i, 0x3f); | 
|  |  | 
|  | /* | 
|  | * If we have a clamp use it, activating in conjunction with | 
|  | * GPIO5 if that is connected for jack detect operation. | 
|  | */ | 
|  | if (info->micd_clamp) { | 
|  | if (arizona->pdata.jd_gpio5) { | 
|  | /* Put the GPIO into input mode with optional pull */ | 
|  | val = 0xc101; | 
|  | if (arizona->pdata.jd_gpio5_nopull) | 
|  | val &= ~ARIZONA_GPN_PU; | 
|  |  | 
|  | regmap_write(arizona->regmap, ARIZONA_GPIO5_CTRL, | 
|  | val); | 
|  |  | 
|  | if (arizona->pdata.jd_invert) | 
|  | clamp_mode = ARIZONA_MICD_CLAMP_MODE_JDH_GP5H; | 
|  | else | 
|  | clamp_mode = ARIZONA_MICD_CLAMP_MODE_JDL_GP5H; | 
|  | } else { | 
|  | if (arizona->pdata.jd_invert) | 
|  | clamp_mode = ARIZONA_MICD_CLAMP_MODE_JDH; | 
|  | else | 
|  | clamp_mode = ARIZONA_MICD_CLAMP_MODE_JDL; | 
|  | } | 
|  |  | 
|  | regmap_update_bits(arizona->regmap, | 
|  | ARIZONA_MICD_CLAMP_CONTROL, | 
|  | ARIZONA_MICD_CLAMP_MODE_MASK, clamp_mode); | 
|  |  | 
|  | regmap_update_bits(arizona->regmap, | 
|  | ARIZONA_JACK_DETECT_DEBOUNCE, | 
|  | ARIZONA_MICD_CLAMP_DB, | 
|  | ARIZONA_MICD_CLAMP_DB); | 
|  | } | 
|  |  | 
|  | arizona_extcon_set_mode(info, 0); | 
|  |  | 
|  | pm_runtime_enable(&pdev->dev); | 
|  | pm_runtime_idle(&pdev->dev); | 
|  | pm_runtime_get_sync(&pdev->dev); | 
|  |  | 
|  | if (info->micd_clamp) { | 
|  | jack_irq_rise = ARIZONA_IRQ_MICD_CLAMP_RISE; | 
|  | jack_irq_fall = ARIZONA_IRQ_MICD_CLAMP_FALL; | 
|  | } else { | 
|  | jack_irq_rise = ARIZONA_IRQ_JD_RISE; | 
|  | jack_irq_fall = ARIZONA_IRQ_JD_FALL; | 
|  | } | 
|  |  | 
|  | ret = arizona_request_irq(arizona, jack_irq_rise, | 
|  | "JACKDET rise", arizona_jackdet, info); | 
|  | if (ret != 0) { | 
|  | dev_err(&pdev->dev, "Failed to get JACKDET rise IRQ: %d\n", | 
|  | ret); | 
|  | goto err_gpio; | 
|  | } | 
|  |  | 
|  | ret = arizona_set_irq_wake(arizona, jack_irq_rise, 1); | 
|  | if (ret != 0) { | 
|  | dev_err(&pdev->dev, "Failed to set JD rise IRQ wake: %d\n", | 
|  | ret); | 
|  | goto err_rise; | 
|  | } | 
|  |  | 
|  | ret = arizona_request_irq(arizona, jack_irq_fall, | 
|  | "JACKDET fall", arizona_jackdet, info); | 
|  | if (ret != 0) { | 
|  | dev_err(&pdev->dev, "Failed to get JD fall IRQ: %d\n", ret); | 
|  | goto err_rise_wake; | 
|  | } | 
|  |  | 
|  | ret = arizona_set_irq_wake(arizona, jack_irq_fall, 1); | 
|  | if (ret != 0) { | 
|  | dev_err(&pdev->dev, "Failed to set JD fall IRQ wake: %d\n", | 
|  | ret); | 
|  | goto err_fall; | 
|  | } | 
|  |  | 
|  | ret = arizona_request_irq(arizona, ARIZONA_IRQ_MICDET, | 
|  | "MICDET", arizona_micdet, info); | 
|  | if (ret != 0) { | 
|  | dev_err(&pdev->dev, "Failed to get MICDET IRQ: %d\n", ret); | 
|  | goto err_fall_wake; | 
|  | } | 
|  |  | 
|  | ret = arizona_request_irq(arizona, ARIZONA_IRQ_HPDET, | 
|  | "HPDET", arizona_hpdet_irq, info); | 
|  | if (ret != 0) { | 
|  | dev_err(&pdev->dev, "Failed to get HPDET IRQ: %d\n", ret); | 
|  | goto err_micdet; | 
|  | } | 
|  |  | 
|  | arizona_clk32k_enable(arizona); | 
|  | regmap_update_bits(arizona->regmap, ARIZONA_JACK_DETECT_DEBOUNCE, | 
|  | ARIZONA_JD1_DB, ARIZONA_JD1_DB); | 
|  | regmap_update_bits(arizona->regmap, ARIZONA_JACK_DETECT_ANALOGUE, | 
|  | ARIZONA_JD1_ENA, ARIZONA_JD1_ENA); | 
|  |  | 
|  | ret = regulator_allow_bypass(info->micvdd, true); | 
|  | if (ret != 0) | 
|  | dev_warn(arizona->dev, "Failed to set MICVDD to bypass: %d\n", | 
|  | ret); | 
|  |  | 
|  | pm_runtime_put(&pdev->dev); | 
|  |  | 
|  | ret = input_register_device(info->input); | 
|  | if (ret) { | 
|  | dev_err(&pdev->dev, "Can't register input device: %d\n", ret); | 
|  | goto err_hpdet; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  |  | 
|  | err_hpdet: | 
|  | arizona_free_irq(arizona, ARIZONA_IRQ_HPDET, info); | 
|  | err_micdet: | 
|  | arizona_free_irq(arizona, ARIZONA_IRQ_MICDET, info); | 
|  | err_fall_wake: | 
|  | arizona_set_irq_wake(arizona, jack_irq_fall, 0); | 
|  | err_fall: | 
|  | arizona_free_irq(arizona, jack_irq_fall, info); | 
|  | err_rise_wake: | 
|  | arizona_set_irq_wake(arizona, jack_irq_rise, 0); | 
|  | err_rise: | 
|  | arizona_free_irq(arizona, jack_irq_rise, info); | 
|  | err_gpio: | 
|  | gpiod_put(info->micd_pol_gpio); | 
|  | err_register: | 
|  | pm_runtime_disable(&pdev->dev); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int arizona_extcon_remove(struct platform_device *pdev) | 
|  | { | 
|  | struct arizona_extcon_info *info = platform_get_drvdata(pdev); | 
|  | struct arizona *arizona = info->arizona; | 
|  | int jack_irq_rise, jack_irq_fall; | 
|  |  | 
|  | gpiod_put(info->micd_pol_gpio); | 
|  |  | 
|  | pm_runtime_disable(&pdev->dev); | 
|  |  | 
|  | regmap_update_bits(arizona->regmap, | 
|  | ARIZONA_MICD_CLAMP_CONTROL, | 
|  | ARIZONA_MICD_CLAMP_MODE_MASK, 0); | 
|  |  | 
|  | if (info->micd_clamp) { | 
|  | jack_irq_rise = ARIZONA_IRQ_MICD_CLAMP_RISE; | 
|  | jack_irq_fall = ARIZONA_IRQ_MICD_CLAMP_FALL; | 
|  | } else { | 
|  | jack_irq_rise = ARIZONA_IRQ_JD_RISE; | 
|  | jack_irq_fall = ARIZONA_IRQ_JD_FALL; | 
|  | } | 
|  |  | 
|  | arizona_set_irq_wake(arizona, jack_irq_rise, 0); | 
|  | arizona_set_irq_wake(arizona, jack_irq_fall, 0); | 
|  | arizona_free_irq(arizona, ARIZONA_IRQ_HPDET, info); | 
|  | arizona_free_irq(arizona, ARIZONA_IRQ_MICDET, info); | 
|  | arizona_free_irq(arizona, jack_irq_rise, info); | 
|  | arizona_free_irq(arizona, jack_irq_fall, info); | 
|  | cancel_delayed_work_sync(&info->hpdet_work); | 
|  | regmap_update_bits(arizona->regmap, ARIZONA_JACK_DETECT_ANALOGUE, | 
|  | ARIZONA_JD1_ENA, 0); | 
|  | arizona_clk32k_disable(arizona); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static struct platform_driver arizona_extcon_driver = { | 
|  | .driver		= { | 
|  | .name	= "arizona-extcon", | 
|  | }, | 
|  | .probe		= arizona_extcon_probe, | 
|  | .remove		= arizona_extcon_remove, | 
|  | }; | 
|  |  | 
|  | module_platform_driver(arizona_extcon_driver); | 
|  |  | 
|  | MODULE_DESCRIPTION("Arizona Extcon driver"); | 
|  | MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>"); | 
|  | MODULE_LICENSE("GPL"); | 
|  | MODULE_ALIAS("platform:extcon-arizona"); |