|  | /* | 
|  | *  Copyright (C) 1994-1998	    Linus Torvalds & authors (see below) | 
|  | *  Copyright (C) 2003-2005, 2007   Bartlomiej Zolnierkiewicz | 
|  | */ | 
|  |  | 
|  | /* | 
|  | *  Mostly written by Mark Lord  <mlord@pobox.com> | 
|  | *                and Gadi Oxman <gadio@netvision.net.il> | 
|  | *                and Andre Hedrick <andre@linux-ide.org> | 
|  | * | 
|  | *  See linux/MAINTAINERS for address of current maintainer. | 
|  | * | 
|  | * This is the multiple IDE interface driver, as evolved from hd.c. | 
|  | * It supports up to MAX_HWIFS IDE interfaces, on one or more IRQs | 
|  | *   (usually 14 & 15). | 
|  | * There can be up to two drives per interface, as per the ATA-2 spec. | 
|  | * | 
|  | * ... | 
|  | * | 
|  | *  From hd.c: | 
|  | *  | | 
|  | *  | It traverses the request-list, using interrupts to jump between functions. | 
|  | *  | As nearly all functions can be called within interrupts, we may not sleep. | 
|  | *  | Special care is recommended.  Have Fun! | 
|  | *  | | 
|  | *  | modified by Drew Eckhardt to check nr of hd's from the CMOS. | 
|  | *  | | 
|  | *  | Thanks to Branko Lankester, lankeste@fwi.uva.nl, who found a bug | 
|  | *  | in the early extended-partition checks and added DM partitions. | 
|  | *  | | 
|  | *  | Early work on error handling by Mika Liljeberg (liljeber@cs.Helsinki.FI). | 
|  | *  | | 
|  | *  | IRQ-unmask, drive-id, multiple-mode, support for ">16 heads", | 
|  | *  | and general streamlining by Mark Lord (mlord@pobox.com). | 
|  | * | 
|  | *  October, 1994 -- Complete line-by-line overhaul for linux 1.1.x, by: | 
|  | * | 
|  | *	Mark Lord	(mlord@pobox.com)		(IDE Perf.Pkg) | 
|  | *	Delman Lee	(delman@ieee.org)		("Mr. atdisk2") | 
|  | *	Scott Snyder	(snyder@fnald0.fnal.gov)	(ATAPI IDE cd-rom) | 
|  | * | 
|  | *  This was a rewrite of just about everything from hd.c, though some original | 
|  | *  code is still sprinkled about.  Think of it as a major evolution, with | 
|  | *  inspiration from lots of linux users, esp.  hamish@zot.apana.org.au | 
|  | */ | 
|  |  | 
|  | #include <linux/module.h> | 
|  | #include <linux/types.h> | 
|  | #include <linux/string.h> | 
|  | #include <linux/kernel.h> | 
|  | #include <linux/interrupt.h> | 
|  | #include <linux/major.h> | 
|  | #include <linux/errno.h> | 
|  | #include <linux/genhd.h> | 
|  | #include <linux/init.h> | 
|  | #include <linux/pci.h> | 
|  | #include <linux/ide.h> | 
|  | #include <linux/hdreg.h> | 
|  | #include <linux/completion.h> | 
|  | #include <linux/device.h> | 
|  |  | 
|  | struct class *ide_port_class; | 
|  |  | 
|  | /** | 
|  | * ide_device_get	-	get an additional reference to a ide_drive_t | 
|  | * @drive:	device to get a reference to | 
|  | * | 
|  | * Gets a reference to the ide_drive_t and increments the use count of the | 
|  | * underlying LLDD module. | 
|  | */ | 
|  | int ide_device_get(ide_drive_t *drive) | 
|  | { | 
|  | struct device *host_dev; | 
|  | struct module *module; | 
|  |  | 
|  | if (!get_device(&drive->gendev)) | 
|  | return -ENXIO; | 
|  |  | 
|  | host_dev = drive->hwif->host->dev[0]; | 
|  | module = host_dev ? host_dev->driver->owner : NULL; | 
|  |  | 
|  | if (module && !try_module_get(module)) { | 
|  | put_device(&drive->gendev); | 
|  | return -ENXIO; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(ide_device_get); | 
|  |  | 
|  | /** | 
|  | * ide_device_put	-	release a reference to a ide_drive_t | 
|  | * @drive:	device to release a reference on | 
|  | * | 
|  | * Release a reference to the ide_drive_t and decrements the use count of | 
|  | * the underlying LLDD module. | 
|  | */ | 
|  | void ide_device_put(ide_drive_t *drive) | 
|  | { | 
|  | #ifdef CONFIG_MODULE_UNLOAD | 
|  | struct device *host_dev = drive->hwif->host->dev[0]; | 
|  | struct module *module = host_dev ? host_dev->driver->owner : NULL; | 
|  |  | 
|  | module_put(module); | 
|  | #endif | 
|  | put_device(&drive->gendev); | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(ide_device_put); | 
|  |  | 
|  | static int ide_bus_match(struct device *dev, struct device_driver *drv) | 
|  | { | 
|  | return 1; | 
|  | } | 
|  |  | 
|  | static int ide_uevent(struct device *dev, struct kobj_uevent_env *env) | 
|  | { | 
|  | ide_drive_t *drive = to_ide_device(dev); | 
|  |  | 
|  | add_uevent_var(env, "MEDIA=%s", ide_media_string(drive)); | 
|  | add_uevent_var(env, "DRIVENAME=%s", drive->name); | 
|  | add_uevent_var(env, "MODALIAS=ide:m-%s", ide_media_string(drive)); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int generic_ide_probe(struct device *dev) | 
|  | { | 
|  | ide_drive_t *drive = to_ide_device(dev); | 
|  | struct ide_driver *drv = to_ide_driver(dev->driver); | 
|  |  | 
|  | return drv->probe ? drv->probe(drive) : -ENODEV; | 
|  | } | 
|  |  | 
|  | static int generic_ide_remove(struct device *dev) | 
|  | { | 
|  | ide_drive_t *drive = to_ide_device(dev); | 
|  | struct ide_driver *drv = to_ide_driver(dev->driver); | 
|  |  | 
|  | if (drv->remove) | 
|  | drv->remove(drive); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void generic_ide_shutdown(struct device *dev) | 
|  | { | 
|  | ide_drive_t *drive = to_ide_device(dev); | 
|  | struct ide_driver *drv = to_ide_driver(dev->driver); | 
|  |  | 
|  | if (dev->driver && drv->shutdown) | 
|  | drv->shutdown(drive); | 
|  | } | 
|  |  | 
|  | struct bus_type ide_bus_type = { | 
|  | .name		= "ide", | 
|  | .match		= ide_bus_match, | 
|  | .uevent		= ide_uevent, | 
|  | .probe		= generic_ide_probe, | 
|  | .remove		= generic_ide_remove, | 
|  | .shutdown	= generic_ide_shutdown, | 
|  | .dev_groups	= ide_dev_groups, | 
|  | .suspend	= generic_ide_suspend, | 
|  | .resume		= generic_ide_resume, | 
|  | }; | 
|  |  | 
|  | EXPORT_SYMBOL_GPL(ide_bus_type); | 
|  |  | 
|  | int ide_vlb_clk; | 
|  | EXPORT_SYMBOL_GPL(ide_vlb_clk); | 
|  |  | 
|  | module_param_named(vlb_clock, ide_vlb_clk, int, 0); | 
|  | MODULE_PARM_DESC(vlb_clock, "VLB clock frequency (in MHz)"); | 
|  |  | 
|  | int ide_pci_clk; | 
|  | EXPORT_SYMBOL_GPL(ide_pci_clk); | 
|  |  | 
|  | module_param_named(pci_clock, ide_pci_clk, int, 0); | 
|  | MODULE_PARM_DESC(pci_clock, "PCI bus clock frequency (in MHz)"); | 
|  |  | 
|  | static int ide_set_dev_param_mask(const char *s, const struct kernel_param *kp) | 
|  | { | 
|  | unsigned int a, b, i, j = 1; | 
|  | unsigned int *dev_param_mask = (unsigned int *)kp->arg; | 
|  |  | 
|  | /* controller . device (0 or 1) [ : 1 (set) | 0 (clear) ] */ | 
|  | if (sscanf(s, "%u.%u:%u", &a, &b, &j) != 3 && | 
|  | sscanf(s, "%u.%u", &a, &b) != 2) | 
|  | return -EINVAL; | 
|  |  | 
|  | i = a * MAX_DRIVES + b; | 
|  |  | 
|  | if (i >= MAX_HWIFS * MAX_DRIVES || j > 1) | 
|  | return -EINVAL; | 
|  |  | 
|  | if (j) | 
|  | *dev_param_mask |= (1 << i); | 
|  | else | 
|  | *dev_param_mask &= ~(1 << i); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static const struct kernel_param_ops param_ops_ide_dev_mask = { | 
|  | .set = ide_set_dev_param_mask | 
|  | }; | 
|  |  | 
|  | #define param_check_ide_dev_mask(name, p) param_check_uint(name, p) | 
|  |  | 
|  | static unsigned int ide_nodma; | 
|  |  | 
|  | module_param_named(nodma, ide_nodma, ide_dev_mask, 0); | 
|  | MODULE_PARM_DESC(nodma, "disallow DMA for a device"); | 
|  |  | 
|  | static unsigned int ide_noflush; | 
|  |  | 
|  | module_param_named(noflush, ide_noflush, ide_dev_mask, 0); | 
|  | MODULE_PARM_DESC(noflush, "disable flush requests for a device"); | 
|  |  | 
|  | static unsigned int ide_nohpa; | 
|  |  | 
|  | module_param_named(nohpa, ide_nohpa, ide_dev_mask, 0); | 
|  | MODULE_PARM_DESC(nohpa, "disable Host Protected Area for a device"); | 
|  |  | 
|  | static unsigned int ide_noprobe; | 
|  |  | 
|  | module_param_named(noprobe, ide_noprobe, ide_dev_mask, 0); | 
|  | MODULE_PARM_DESC(noprobe, "skip probing for a device"); | 
|  |  | 
|  | static unsigned int ide_nowerr; | 
|  |  | 
|  | module_param_named(nowerr, ide_nowerr, ide_dev_mask, 0); | 
|  | MODULE_PARM_DESC(nowerr, "ignore the ATA_DF bit for a device"); | 
|  |  | 
|  | static unsigned int ide_cdroms; | 
|  |  | 
|  | module_param_named(cdrom, ide_cdroms, ide_dev_mask, 0); | 
|  | MODULE_PARM_DESC(cdrom, "force device as a CD-ROM"); | 
|  |  | 
|  | struct chs_geom { | 
|  | unsigned int	cyl; | 
|  | u8		head; | 
|  | u8		sect; | 
|  | }; | 
|  |  | 
|  | static unsigned int ide_disks; | 
|  | static struct chs_geom ide_disks_chs[MAX_HWIFS * MAX_DRIVES]; | 
|  |  | 
|  | static int ide_set_disk_chs(const char *str, const struct kernel_param *kp) | 
|  | { | 
|  | unsigned int a, b, c = 0, h = 0, s = 0, i, j = 1; | 
|  |  | 
|  | /* controller . device (0 or 1) : Cylinders , Heads , Sectors */ | 
|  | /* controller . device (0 or 1) : 1 (use CHS) | 0 (ignore CHS) */ | 
|  | if (sscanf(str, "%u.%u:%u,%u,%u", &a, &b, &c, &h, &s) != 5 && | 
|  | sscanf(str, "%u.%u:%u", &a, &b, &j) != 3) | 
|  | return -EINVAL; | 
|  |  | 
|  | i = a * MAX_DRIVES + b; | 
|  |  | 
|  | if (i >= MAX_HWIFS * MAX_DRIVES || j > 1) | 
|  | return -EINVAL; | 
|  |  | 
|  | if (c > INT_MAX || h > 255 || s > 255) | 
|  | return -EINVAL; | 
|  |  | 
|  | if (j) | 
|  | ide_disks |= (1 << i); | 
|  | else | 
|  | ide_disks &= ~(1 << i); | 
|  |  | 
|  | ide_disks_chs[i].cyl  = c; | 
|  | ide_disks_chs[i].head = h; | 
|  | ide_disks_chs[i].sect = s; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | module_param_call(chs, ide_set_disk_chs, NULL, NULL, 0); | 
|  | MODULE_PARM_DESC(chs, "force device as a disk (using CHS)"); | 
|  |  | 
|  | static void ide_dev_apply_params(ide_drive_t *drive, u8 unit) | 
|  | { | 
|  | int i = drive->hwif->index * MAX_DRIVES + unit; | 
|  |  | 
|  | if (ide_nodma & (1 << i)) { | 
|  | printk(KERN_INFO "ide: disallowing DMA for %s\n", drive->name); | 
|  | drive->dev_flags |= IDE_DFLAG_NODMA; | 
|  | } | 
|  | if (ide_noflush & (1 << i)) { | 
|  | printk(KERN_INFO "ide: disabling flush requests for %s\n", | 
|  | drive->name); | 
|  | drive->dev_flags |= IDE_DFLAG_NOFLUSH; | 
|  | } | 
|  | if (ide_nohpa & (1 << i)) { | 
|  | printk(KERN_INFO "ide: disabling Host Protected Area for %s\n", | 
|  | drive->name); | 
|  | drive->dev_flags |= IDE_DFLAG_NOHPA; | 
|  | } | 
|  | if (ide_noprobe & (1 << i)) { | 
|  | printk(KERN_INFO "ide: skipping probe for %s\n", drive->name); | 
|  | drive->dev_flags |= IDE_DFLAG_NOPROBE; | 
|  | } | 
|  | if (ide_nowerr & (1 << i)) { | 
|  | printk(KERN_INFO "ide: ignoring the ATA_DF bit for %s\n", | 
|  | drive->name); | 
|  | drive->bad_wstat = BAD_R_STAT; | 
|  | } | 
|  | if (ide_cdroms & (1 << i)) { | 
|  | printk(KERN_INFO "ide: forcing %s as a CD-ROM\n", drive->name); | 
|  | drive->dev_flags |= IDE_DFLAG_PRESENT; | 
|  | drive->media = ide_cdrom; | 
|  | /* an ATAPI device ignores DRDY */ | 
|  | drive->ready_stat = 0; | 
|  | } | 
|  | if (ide_disks & (1 << i)) { | 
|  | drive->cyl  = drive->bios_cyl  = ide_disks_chs[i].cyl; | 
|  | drive->head = drive->bios_head = ide_disks_chs[i].head; | 
|  | drive->sect = drive->bios_sect = ide_disks_chs[i].sect; | 
|  |  | 
|  | printk(KERN_INFO "ide: forcing %s as a disk (%d/%d/%d)\n", | 
|  | drive->name, | 
|  | drive->cyl, drive->head, drive->sect); | 
|  |  | 
|  | drive->dev_flags |= IDE_DFLAG_FORCED_GEOM | IDE_DFLAG_PRESENT; | 
|  | drive->media = ide_disk; | 
|  | drive->ready_stat = ATA_DRDY; | 
|  | } | 
|  | } | 
|  |  | 
|  | static unsigned int ide_ignore_cable; | 
|  |  | 
|  | static int ide_set_ignore_cable(const char *s, const struct kernel_param *kp) | 
|  | { | 
|  | int i, j = 1; | 
|  |  | 
|  | /* controller (ignore) */ | 
|  | /* controller : 1 (ignore) | 0 (use) */ | 
|  | if (sscanf(s, "%d:%d", &i, &j) != 2 && sscanf(s, "%d", &i) != 1) | 
|  | return -EINVAL; | 
|  |  | 
|  | if (i >= MAX_HWIFS || j < 0 || j > 1) | 
|  | return -EINVAL; | 
|  |  | 
|  | if (j) | 
|  | ide_ignore_cable |= (1 << i); | 
|  | else | 
|  | ide_ignore_cable &= ~(1 << i); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | module_param_call(ignore_cable, ide_set_ignore_cable, NULL, NULL, 0); | 
|  | MODULE_PARM_DESC(ignore_cable, "ignore cable detection"); | 
|  |  | 
|  | void ide_port_apply_params(ide_hwif_t *hwif) | 
|  | { | 
|  | ide_drive_t *drive; | 
|  | int i; | 
|  |  | 
|  | if (ide_ignore_cable & (1 << hwif->index)) { | 
|  | printk(KERN_INFO "ide: ignoring cable detection for %s\n", | 
|  | hwif->name); | 
|  | hwif->cbl = ATA_CBL_PATA40_SHORT; | 
|  | } | 
|  |  | 
|  | ide_port_for_each_dev(i, drive, hwif) | 
|  | ide_dev_apply_params(drive, i); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * This is gets invoked once during initialization, to set *everything* up | 
|  | */ | 
|  | static int __init ide_init(void) | 
|  | { | 
|  | int ret; | 
|  |  | 
|  | printk(KERN_INFO "Uniform Multi-Platform E-IDE driver\n"); | 
|  |  | 
|  | ret = bus_register(&ide_bus_type); | 
|  | if (ret < 0) { | 
|  | printk(KERN_WARNING "IDE: bus_register error: %d\n", ret); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | ide_port_class = class_create(THIS_MODULE, "ide_port"); | 
|  | if (IS_ERR(ide_port_class)) { | 
|  | ret = PTR_ERR(ide_port_class); | 
|  | goto out_port_class; | 
|  | } | 
|  |  | 
|  | ide_acpi_init(); | 
|  |  | 
|  | proc_ide_create(); | 
|  |  | 
|  | return 0; | 
|  |  | 
|  | out_port_class: | 
|  | bus_unregister(&ide_bus_type); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static void __exit ide_exit(void) | 
|  | { | 
|  | proc_ide_destroy(); | 
|  |  | 
|  | class_destroy(ide_port_class); | 
|  |  | 
|  | bus_unregister(&ide_bus_type); | 
|  | } | 
|  |  | 
|  | module_init(ide_init); | 
|  | module_exit(ide_exit); | 
|  |  | 
|  | MODULE_LICENSE("GPL"); |