| /* | |
| * Force feedback support for DragonRise Inc. game controllers | |
| * | |
| * From what I have gathered, these devices are mass produced in China and are | |
| * distributed under several vendors. They often share the same design as | |
| * the original PlayStation DualShock controller. | |
| * | |
| * 0079:0006 "DragonRise Inc. Generic USB Joystick " | |
| * - tested with a Tesun USB-703 game controller. | |
| * | |
| * Copyright (c) 2009 Richard Walmsley <richwalm@gmail.com> | |
| */ | |
| /* | |
| * This program is free software; you can redistribute it and/or modify | |
| * it under the terms of the GNU General Public License as published by | |
| * the Free Software Foundation; either version 2 of the License, or | |
| * (at your option) any later version. | |
| * | |
| * This program is distributed in the hope that it will be useful, | |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
| * GNU General Public License for more details. | |
| * | |
| * You should have received a copy of the GNU General Public License | |
| * along with this program; if not, write to the Free Software | |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA | |
| */ | |
| #include <linux/input.h> | |
| #include <linux/slab.h> | |
| #include <linux/hid.h> | |
| #include <linux/module.h> | |
| #include "hid-ids.h" | |
| #ifdef CONFIG_DRAGONRISE_FF | |
| struct drff_device { | |
| struct hid_report *report; | |
| }; | |
| static int drff_play(struct input_dev *dev, void *data, | |
| struct ff_effect *effect) | |
| { | |
| struct hid_device *hid = input_get_drvdata(dev); | |
| struct drff_device *drff = data; | |
| int strong, weak; | |
| strong = effect->u.rumble.strong_magnitude; | |
| weak = effect->u.rumble.weak_magnitude; | |
| dbg_hid("called with 0x%04x 0x%04x", strong, weak); | |
| if (strong || weak) { | |
| strong = strong * 0xff / 0xffff; | |
| weak = weak * 0xff / 0xffff; | |
| /* While reverse engineering this device, I found that when | |
| this value is set, it causes the strong rumble to function | |
| at a near maximum speed, so we'll bypass it. */ | |
| if (weak == 0x0a) | |
| weak = 0x0b; | |
| drff->report->field[0]->value[0] = 0x51; | |
| drff->report->field[0]->value[1] = 0x00; | |
| drff->report->field[0]->value[2] = weak; | |
| drff->report->field[0]->value[4] = strong; | |
| hid_hw_request(hid, drff->report, HID_REQ_SET_REPORT); | |
| drff->report->field[0]->value[0] = 0xfa; | |
| drff->report->field[0]->value[1] = 0xfe; | |
| } else { | |
| drff->report->field[0]->value[0] = 0xf3; | |
| drff->report->field[0]->value[1] = 0x00; | |
| } | |
| drff->report->field[0]->value[2] = 0x00; | |
| drff->report->field[0]->value[4] = 0x00; | |
| dbg_hid("running with 0x%02x 0x%02x", strong, weak); | |
| hid_hw_request(hid, drff->report, HID_REQ_SET_REPORT); | |
| return 0; | |
| } | |
| static int drff_init(struct hid_device *hid) | |
| { | |
| struct drff_device *drff; | |
| struct hid_report *report; | |
| struct hid_input *hidinput = list_first_entry(&hid->inputs, | |
| struct hid_input, list); | |
| struct list_head *report_list = | |
| &hid->report_enum[HID_OUTPUT_REPORT].report_list; | |
| struct input_dev *dev = hidinput->input; | |
| int error; | |
| if (list_empty(report_list)) { | |
| hid_err(hid, "no output reports found\n"); | |
| return -ENODEV; | |
| } | |
| report = list_first_entry(report_list, struct hid_report, list); | |
| if (report->maxfield < 1) { | |
| hid_err(hid, "no fields in the report\n"); | |
| return -ENODEV; | |
| } | |
| if (report->field[0]->report_count < 7) { | |
| hid_err(hid, "not enough values in the field\n"); | |
| return -ENODEV; | |
| } | |
| drff = kzalloc(sizeof(struct drff_device), GFP_KERNEL); | |
| if (!drff) | |
| return -ENOMEM; | |
| set_bit(FF_RUMBLE, dev->ffbit); | |
| error = input_ff_create_memless(dev, drff, drff_play); | |
| if (error) { | |
| kfree(drff); | |
| return error; | |
| } | |
| drff->report = report; | |
| drff->report->field[0]->value[0] = 0xf3; | |
| drff->report->field[0]->value[1] = 0x00; | |
| drff->report->field[0]->value[2] = 0x00; | |
| drff->report->field[0]->value[3] = 0x00; | |
| drff->report->field[0]->value[4] = 0x00; | |
| drff->report->field[0]->value[5] = 0x00; | |
| drff->report->field[0]->value[6] = 0x00; | |
| hid_hw_request(hid, drff->report, HID_REQ_SET_REPORT); | |
| hid_info(hid, "Force Feedback for DragonRise Inc. " | |
| "game controllers by Richard Walmsley <richwalm@gmail.com>\n"); | |
| return 0; | |
| } | |
| #else | |
| static inline int drff_init(struct hid_device *hid) | |
| { | |
| return 0; | |
| } | |
| #endif | |
| /* | |
| * The original descriptor of joystick with PID 0x0011, represented by DVTech PC | |
| * JS19. It seems both copied from another device and a result of confusion | |
| * either about the specification or about the program used to create the | |
| * descriptor. In any case, it's a wonder it works on Windows. | |
| * | |
| * Usage Page (Desktop), ; Generic desktop controls (01h) | |
| * Usage (Joystick), ; Joystick (04h, application collection) | |
| * Collection (Application), | |
| * Collection (Logical), | |
| * Report Size (8), | |
| * Report Count (5), | |
| * Logical Minimum (0), | |
| * Logical Maximum (255), | |
| * Physical Minimum (0), | |
| * Physical Maximum (255), | |
| * Usage (X), ; X (30h, dynamic value) | |
| * Usage (X), ; X (30h, dynamic value) | |
| * Usage (X), ; X (30h, dynamic value) | |
| * Usage (X), ; X (30h, dynamic value) | |
| * Usage (Y), ; Y (31h, dynamic value) | |
| * Input (Variable), | |
| * Report Size (4), | |
| * Report Count (1), | |
| * Logical Maximum (7), | |
| * Physical Maximum (315), | |
| * Unit (Degrees), | |
| * Usage (00h), | |
| * Input (Variable, Null State), | |
| * Unit, | |
| * Report Size (1), | |
| * Report Count (10), | |
| * Logical Maximum (1), | |
| * Physical Maximum (1), | |
| * Usage Page (Button), ; Button (09h) | |
| * Usage Minimum (01h), | |
| * Usage Maximum (0Ah), | |
| * Input (Variable), | |
| * Usage Page (FF00h), ; FF00h, vendor-defined | |
| * Report Size (1), | |
| * Report Count (10), | |
| * Logical Maximum (1), | |
| * Physical Maximum (1), | |
| * Usage (01h), | |
| * Input (Variable), | |
| * End Collection, | |
| * Collection (Logical), | |
| * Report Size (8), | |
| * Report Count (4), | |
| * Physical Maximum (255), | |
| * Logical Maximum (255), | |
| * Usage (02h), | |
| * Output (Variable), | |
| * End Collection, | |
| * End Collection | |
| */ | |
| /* Size of the original descriptor of the PID 0x0011 joystick */ | |
| #define PID0011_RDESC_ORIG_SIZE 101 | |
| /* Fixed report descriptor for PID 0x011 joystick */ | |
| static __u8 pid0011_rdesc_fixed[] = { | |
| 0x05, 0x01, /* Usage Page (Desktop), */ | |
| 0x09, 0x04, /* Usage (Joystick), */ | |
| 0xA1, 0x01, /* Collection (Application), */ | |
| 0xA1, 0x02, /* Collection (Logical), */ | |
| 0x14, /* Logical Minimum (0), */ | |
| 0x75, 0x08, /* Report Size (8), */ | |
| 0x95, 0x03, /* Report Count (3), */ | |
| 0x81, 0x01, /* Input (Constant), */ | |
| 0x26, 0xFF, 0x00, /* Logical Maximum (255), */ | |
| 0x95, 0x02, /* Report Count (2), */ | |
| 0x09, 0x30, /* Usage (X), */ | |
| 0x09, 0x31, /* Usage (Y), */ | |
| 0x81, 0x02, /* Input (Variable), */ | |
| 0x75, 0x01, /* Report Size (1), */ | |
| 0x95, 0x04, /* Report Count (4), */ | |
| 0x81, 0x01, /* Input (Constant), */ | |
| 0x25, 0x01, /* Logical Maximum (1), */ | |
| 0x95, 0x0A, /* Report Count (10), */ | |
| 0x05, 0x09, /* Usage Page (Button), */ | |
| 0x19, 0x01, /* Usage Minimum (01h), */ | |
| 0x29, 0x0A, /* Usage Maximum (0Ah), */ | |
| 0x81, 0x02, /* Input (Variable), */ | |
| 0x95, 0x0A, /* Report Count (10), */ | |
| 0x81, 0x01, /* Input (Constant), */ | |
| 0xC0, /* End Collection, */ | |
| 0xC0 /* End Collection */ | |
| }; | |
| static __u8 *dr_report_fixup(struct hid_device *hdev, __u8 *rdesc, | |
| unsigned int *rsize) | |
| { | |
| switch (hdev->product) { | |
| case 0x0011: | |
| if (*rsize == PID0011_RDESC_ORIG_SIZE) { | |
| rdesc = pid0011_rdesc_fixed; | |
| *rsize = sizeof(pid0011_rdesc_fixed); | |
| } | |
| break; | |
| } | |
| return rdesc; | |
| } | |
| #define map_abs(c) hid_map_usage(hi, usage, bit, max, EV_ABS, (c)) | |
| #define map_rel(c) hid_map_usage(hi, usage, bit, max, EV_REL, (c)) | |
| static int dr_input_mapping(struct hid_device *hdev, struct hid_input *hi, | |
| struct hid_field *field, struct hid_usage *usage, | |
| unsigned long **bit, int *max) | |
| { | |
| switch (usage->hid) { | |
| /* | |
| * revert to the old hid-input behavior where axes | |
| * can be randomly assigned when hid->usage is reused. | |
| */ | |
| case HID_GD_X: case HID_GD_Y: case HID_GD_Z: | |
| case HID_GD_RX: case HID_GD_RY: case HID_GD_RZ: | |
| if (field->flags & HID_MAIN_ITEM_RELATIVE) | |
| map_rel(usage->hid & 0xf); | |
| else | |
| map_abs(usage->hid & 0xf); | |
| return 1; | |
| } | |
| return 0; | |
| } | |
| static int dr_probe(struct hid_device *hdev, const struct hid_device_id *id) | |
| { | |
| int ret; | |
| dev_dbg(&hdev->dev, "DragonRise Inc. HID hardware probe..."); | |
| ret = hid_parse(hdev); | |
| if (ret) { | |
| hid_err(hdev, "parse failed\n"); | |
| goto err; | |
| } | |
| ret = hid_hw_start(hdev, HID_CONNECT_DEFAULT & ~HID_CONNECT_FF); | |
| if (ret) { | |
| hid_err(hdev, "hw start failed\n"); | |
| goto err; | |
| } | |
| switch (hdev->product) { | |
| case 0x0006: | |
| ret = drff_init(hdev); | |
| if (ret) { | |
| dev_err(&hdev->dev, "force feedback init failed\n"); | |
| hid_hw_stop(hdev); | |
| goto err; | |
| } | |
| break; | |
| } | |
| return 0; | |
| err: | |
| return ret; | |
| } | |
| static const struct hid_device_id dr_devices[] = { | |
| { HID_USB_DEVICE(USB_VENDOR_ID_DRAGONRISE, 0x0006), }, | |
| { HID_USB_DEVICE(USB_VENDOR_ID_DRAGONRISE, 0x0011), }, | |
| { } | |
| }; | |
| MODULE_DEVICE_TABLE(hid, dr_devices); | |
| static struct hid_driver dr_driver = { | |
| .name = "dragonrise", | |
| .id_table = dr_devices, | |
| .report_fixup = dr_report_fixup, | |
| .probe = dr_probe, | |
| .input_mapping = dr_input_mapping, | |
| }; | |
| module_hid_driver(dr_driver); | |
| MODULE_LICENSE("GPL"); |