| /* | |
| * Copyright (C) ST-Ericsson SA 2011-2013 | |
| * | |
| * License Terms: GNU General Public License v2 | |
| * | |
| * Author: Mathieu Poirier <mathieu.poirier@linaro.org> for ST-Ericsson | |
| * Author: Jonas Aaberg <jonas.aberg@stericsson.com> for ST-Ericsson | |
| */ | |
| #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt | |
| #include <linux/module.h> | |
| #include <linux/kernel.h> | |
| #include <linux/moduleparam.h> | |
| #include <linux/err.h> | |
| #include <linux/uaccess.h> | |
| #include <linux/watchdog.h> | |
| #include <linux/platform_device.h> | |
| #include <linux/platform_data/ux500_wdt.h> | |
| #include <linux/mfd/dbx500-prcmu.h> | |
| #define WATCHDOG_TIMEOUT 600 /* 10 minutes */ | |
| #define WATCHDOG_MIN 0 | |
| #define WATCHDOG_MAX28 268435 /* 28 bit resolution in ms == 268435.455 s */ | |
| #define WATCHDOG_MAX32 4294967 /* 32 bit resolution in ms == 4294967.295 s */ | |
| static unsigned int timeout = WATCHDOG_TIMEOUT; | |
| module_param(timeout, uint, 0); | |
| MODULE_PARM_DESC(timeout, | |
| "Watchdog timeout in seconds. default=" | |
| __MODULE_STRING(WATCHDOG_TIMEOUT) "."); | |
| static bool nowayout = WATCHDOG_NOWAYOUT; | |
| module_param(nowayout, bool, 0); | |
| MODULE_PARM_DESC(nowayout, | |
| "Watchdog cannot be stopped once started (default=" | |
| __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); | |
| static int ux500_wdt_start(struct watchdog_device *wdd) | |
| { | |
| return prcmu_enable_a9wdog(PRCMU_WDOG_ALL); | |
| } | |
| static int ux500_wdt_stop(struct watchdog_device *wdd) | |
| { | |
| return prcmu_disable_a9wdog(PRCMU_WDOG_ALL); | |
| } | |
| static int ux500_wdt_keepalive(struct watchdog_device *wdd) | |
| { | |
| return prcmu_kick_a9wdog(PRCMU_WDOG_ALL); | |
| } | |
| static int ux500_wdt_set_timeout(struct watchdog_device *wdd, | |
| unsigned int timeout) | |
| { | |
| ux500_wdt_stop(wdd); | |
| prcmu_load_a9wdog(PRCMU_WDOG_ALL, timeout * 1000); | |
| ux500_wdt_start(wdd); | |
| return 0; | |
| } | |
| static const struct watchdog_info ux500_wdt_info = { | |
| .options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE, | |
| .identity = "Ux500 WDT", | |
| .firmware_version = 1, | |
| }; | |
| static const struct watchdog_ops ux500_wdt_ops = { | |
| .owner = THIS_MODULE, | |
| .start = ux500_wdt_start, | |
| .stop = ux500_wdt_stop, | |
| .ping = ux500_wdt_keepalive, | |
| .set_timeout = ux500_wdt_set_timeout, | |
| }; | |
| static struct watchdog_device ux500_wdt = { | |
| .info = &ux500_wdt_info, | |
| .ops = &ux500_wdt_ops, | |
| .min_timeout = WATCHDOG_MIN, | |
| .max_timeout = WATCHDOG_MAX32, | |
| }; | |
| static int ux500_wdt_probe(struct platform_device *pdev) | |
| { | |
| int ret; | |
| struct ux500_wdt_data *pdata = dev_get_platdata(&pdev->dev); | |
| if (pdata) { | |
| if (pdata->timeout > 0) | |
| timeout = pdata->timeout; | |
| if (pdata->has_28_bits_resolution) | |
| ux500_wdt.max_timeout = WATCHDOG_MAX28; | |
| } | |
| ux500_wdt.parent = &pdev->dev; | |
| watchdog_set_nowayout(&ux500_wdt, nowayout); | |
| /* disable auto off on sleep */ | |
| prcmu_config_a9wdog(PRCMU_WDOG_CPU1, false); | |
| /* set HW initial value */ | |
| prcmu_load_a9wdog(PRCMU_WDOG_ALL, timeout * 1000); | |
| ret = watchdog_register_device(&ux500_wdt); | |
| if (ret) | |
| return ret; | |
| dev_info(&pdev->dev, "initialized\n"); | |
| return 0; | |
| } | |
| static int ux500_wdt_remove(struct platform_device *dev) | |
| { | |
| watchdog_unregister_device(&ux500_wdt); | |
| return 0; | |
| } | |
| #ifdef CONFIG_PM | |
| static int ux500_wdt_suspend(struct platform_device *pdev, | |
| pm_message_t state) | |
| { | |
| if (watchdog_active(&ux500_wdt)) { | |
| ux500_wdt_stop(&ux500_wdt); | |
| prcmu_config_a9wdog(PRCMU_WDOG_CPU1, true); | |
| prcmu_load_a9wdog(PRCMU_WDOG_ALL, timeout * 1000); | |
| ux500_wdt_start(&ux500_wdt); | |
| } | |
| return 0; | |
| } | |
| static int ux500_wdt_resume(struct platform_device *pdev) | |
| { | |
| if (watchdog_active(&ux500_wdt)) { | |
| ux500_wdt_stop(&ux500_wdt); | |
| prcmu_config_a9wdog(PRCMU_WDOG_CPU1, false); | |
| prcmu_load_a9wdog(PRCMU_WDOG_ALL, timeout * 1000); | |
| ux500_wdt_start(&ux500_wdt); | |
| } | |
| return 0; | |
| } | |
| #else | |
| #define ux500_wdt_suspend NULL | |
| #define ux500_wdt_resume NULL | |
| #endif | |
| static struct platform_driver ux500_wdt_driver = { | |
| .probe = ux500_wdt_probe, | |
| .remove = ux500_wdt_remove, | |
| .suspend = ux500_wdt_suspend, | |
| .resume = ux500_wdt_resume, | |
| .driver = { | |
| .name = "ux500_wdt", | |
| }, | |
| }; | |
| module_platform_driver(ux500_wdt_driver); | |
| MODULE_AUTHOR("Jonas Aaberg <jonas.aberg@stericsson.com>"); | |
| MODULE_DESCRIPTION("Ux500 Watchdog Driver"); | |
| MODULE_LICENSE("GPL"); | |
| MODULE_ALIAS("platform:ux500_wdt"); |