|  | /* | 
|  | * This file is part of UBIFS. | 
|  | * | 
|  | * Copyright (C) 2006-2008 Nokia Corporation. | 
|  | * | 
|  | * This program is free software; you can redistribute it and/or modify it | 
|  | * under the terms of the GNU General Public License version 2 as published by | 
|  | * the Free Software Foundation. | 
|  | * | 
|  | * This program is distributed in the hope that it will be useful, but WITHOUT | 
|  | * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or | 
|  | * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for | 
|  | * more details. | 
|  | * | 
|  | * You should have received a copy of the GNU General Public License along with | 
|  | * this program; if not, write to the Free Software Foundation, Inc., 51 | 
|  | * Franklin St, Fifth Floor, Boston, MA 02110-1301 USA | 
|  | * | 
|  | * Authors: Artem Bityutskiy (Битюцкий Артём) | 
|  | *          Adrian Hunter | 
|  | */ | 
|  |  | 
|  | /* | 
|  | * This file implements VFS file and inode operations for regular files, device | 
|  | * nodes and symlinks as well as address space operations. | 
|  | * | 
|  | * UBIFS uses 2 page flags: @PG_private and @PG_checked. @PG_private is set if | 
|  | * the page is dirty and is used for optimization purposes - dirty pages are | 
|  | * not budgeted so the flag shows that 'ubifs_write_end()' should not release | 
|  | * the budget for this page. The @PG_checked flag is set if full budgeting is | 
|  | * required for the page e.g., when it corresponds to a file hole or it is | 
|  | * beyond the file size. The budgeting is done in 'ubifs_write_begin()', because | 
|  | * it is OK to fail in this function, and the budget is released in | 
|  | * 'ubifs_write_end()'. So the @PG_private and @PG_checked flags carry | 
|  | * information about how the page was budgeted, to make it possible to release | 
|  | * the budget properly. | 
|  | * | 
|  | * A thing to keep in mind: inode @i_mutex is locked in most VFS operations we | 
|  | * implement. However, this is not true for 'ubifs_writepage()', which may be | 
|  | * called with @i_mutex unlocked. For example, when flusher thread is doing | 
|  | * background write-back, it calls 'ubifs_writepage()' with unlocked @i_mutex. | 
|  | * At "normal" work-paths the @i_mutex is locked in 'ubifs_writepage()', e.g. | 
|  | * in the "sys_write -> alloc_pages -> direct reclaim path". So, in | 
|  | * 'ubifs_writepage()' we are only guaranteed that the page is locked. | 
|  | * | 
|  | * Similarly, @i_mutex is not always locked in 'ubifs_readpage()', e.g., the | 
|  | * read-ahead path does not lock it ("sys_read -> generic_file_aio_read -> | 
|  | * ondemand_readahead -> readpage"). In case of readahead, @I_SYNC flag is not | 
|  | * set as well. However, UBIFS disables readahead. | 
|  | */ | 
|  |  | 
|  | #include "ubifs.h" | 
|  | #include <linux/mount.h> | 
|  | #include <linux/slab.h> | 
|  | #include <linux/migrate.h> | 
|  |  | 
|  | static int read_block(struct inode *inode, void *addr, unsigned int block, | 
|  | struct ubifs_data_node *dn) | 
|  | { | 
|  | struct ubifs_info *c = inode->i_sb->s_fs_info; | 
|  | int err, len, out_len; | 
|  | union ubifs_key key; | 
|  | unsigned int dlen; | 
|  |  | 
|  | data_key_init(c, &key, inode->i_ino, block); | 
|  | err = ubifs_tnc_lookup(c, &key, dn); | 
|  | if (err) { | 
|  | if (err == -ENOENT) | 
|  | /* Not found, so it must be a hole */ | 
|  | memset(addr, 0, UBIFS_BLOCK_SIZE); | 
|  | return err; | 
|  | } | 
|  |  | 
|  | ubifs_assert(c, le64_to_cpu(dn->ch.sqnum) > | 
|  | ubifs_inode(inode)->creat_sqnum); | 
|  | len = le32_to_cpu(dn->size); | 
|  | if (len <= 0 || len > UBIFS_BLOCK_SIZE) | 
|  | goto dump; | 
|  |  | 
|  | dlen = le32_to_cpu(dn->ch.len) - UBIFS_DATA_NODE_SZ; | 
|  |  | 
|  | if (ubifs_crypt_is_encrypted(inode)) { | 
|  | err = ubifs_decrypt(inode, dn, &dlen, block); | 
|  | if (err) | 
|  | goto dump; | 
|  | } | 
|  |  | 
|  | out_len = UBIFS_BLOCK_SIZE; | 
|  | err = ubifs_decompress(c, &dn->data, dlen, addr, &out_len, | 
|  | le16_to_cpu(dn->compr_type)); | 
|  | if (err || len != out_len) | 
|  | goto dump; | 
|  |  | 
|  | /* | 
|  | * Data length can be less than a full block, even for blocks that are | 
|  | * not the last in the file (e.g., as a result of making a hole and | 
|  | * appending data). Ensure that the remainder is zeroed out. | 
|  | */ | 
|  | if (len < UBIFS_BLOCK_SIZE) | 
|  | memset(addr + len, 0, UBIFS_BLOCK_SIZE - len); | 
|  |  | 
|  | return 0; | 
|  |  | 
|  | dump: | 
|  | ubifs_err(c, "bad data node (block %u, inode %lu)", | 
|  | block, inode->i_ino); | 
|  | ubifs_dump_node(c, dn); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | static int do_readpage(struct page *page) | 
|  | { | 
|  | void *addr; | 
|  | int err = 0, i; | 
|  | unsigned int block, beyond; | 
|  | struct ubifs_data_node *dn; | 
|  | struct inode *inode = page->mapping->host; | 
|  | struct ubifs_info *c = inode->i_sb->s_fs_info; | 
|  | loff_t i_size = i_size_read(inode); | 
|  |  | 
|  | dbg_gen("ino %lu, pg %lu, i_size %lld, flags %#lx", | 
|  | inode->i_ino, page->index, i_size, page->flags); | 
|  | ubifs_assert(c, !PageChecked(page)); | 
|  | ubifs_assert(c, !PagePrivate(page)); | 
|  |  | 
|  | addr = kmap(page); | 
|  |  | 
|  | block = page->index << UBIFS_BLOCKS_PER_PAGE_SHIFT; | 
|  | beyond = (i_size + UBIFS_BLOCK_SIZE - 1) >> UBIFS_BLOCK_SHIFT; | 
|  | if (block >= beyond) { | 
|  | /* Reading beyond inode */ | 
|  | SetPageChecked(page); | 
|  | memset(addr, 0, PAGE_SIZE); | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | dn = kmalloc(UBIFS_MAX_DATA_NODE_SZ, GFP_NOFS); | 
|  | if (!dn) { | 
|  | err = -ENOMEM; | 
|  | goto error; | 
|  | } | 
|  |  | 
|  | i = 0; | 
|  | while (1) { | 
|  | int ret; | 
|  |  | 
|  | if (block >= beyond) { | 
|  | /* Reading beyond inode */ | 
|  | err = -ENOENT; | 
|  | memset(addr, 0, UBIFS_BLOCK_SIZE); | 
|  | } else { | 
|  | ret = read_block(inode, addr, block, dn); | 
|  | if (ret) { | 
|  | err = ret; | 
|  | if (err != -ENOENT) | 
|  | break; | 
|  | } else if (block + 1 == beyond) { | 
|  | int dlen = le32_to_cpu(dn->size); | 
|  | int ilen = i_size & (UBIFS_BLOCK_SIZE - 1); | 
|  |  | 
|  | if (ilen && ilen < dlen) | 
|  | memset(addr + ilen, 0, dlen - ilen); | 
|  | } | 
|  | } | 
|  | if (++i >= UBIFS_BLOCKS_PER_PAGE) | 
|  | break; | 
|  | block += 1; | 
|  | addr += UBIFS_BLOCK_SIZE; | 
|  | } | 
|  | if (err) { | 
|  | struct ubifs_info *c = inode->i_sb->s_fs_info; | 
|  | if (err == -ENOENT) { | 
|  | /* Not found, so it must be a hole */ | 
|  | SetPageChecked(page); | 
|  | dbg_gen("hole"); | 
|  | goto out_free; | 
|  | } | 
|  | ubifs_err(c, "cannot read page %lu of inode %lu, error %d", | 
|  | page->index, inode->i_ino, err); | 
|  | goto error; | 
|  | } | 
|  |  | 
|  | out_free: | 
|  | kfree(dn); | 
|  | out: | 
|  | SetPageUptodate(page); | 
|  | ClearPageError(page); | 
|  | flush_dcache_page(page); | 
|  | kunmap(page); | 
|  | return 0; | 
|  |  | 
|  | error: | 
|  | kfree(dn); | 
|  | ClearPageUptodate(page); | 
|  | SetPageError(page); | 
|  | flush_dcache_page(page); | 
|  | kunmap(page); | 
|  | return err; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * release_new_page_budget - release budget of a new page. | 
|  | * @c: UBIFS file-system description object | 
|  | * | 
|  | * This is a helper function which releases budget corresponding to the budget | 
|  | * of one new page of data. | 
|  | */ | 
|  | static void release_new_page_budget(struct ubifs_info *c) | 
|  | { | 
|  | struct ubifs_budget_req req = { .recalculate = 1, .new_page = 1 }; | 
|  |  | 
|  | ubifs_release_budget(c, &req); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * release_existing_page_budget - release budget of an existing page. | 
|  | * @c: UBIFS file-system description object | 
|  | * | 
|  | * This is a helper function which releases budget corresponding to the budget | 
|  | * of changing one one page of data which already exists on the flash media. | 
|  | */ | 
|  | static void release_existing_page_budget(struct ubifs_info *c) | 
|  | { | 
|  | struct ubifs_budget_req req = { .dd_growth = c->bi.page_budget}; | 
|  |  | 
|  | ubifs_release_budget(c, &req); | 
|  | } | 
|  |  | 
|  | static int write_begin_slow(struct address_space *mapping, | 
|  | loff_t pos, unsigned len, struct page **pagep, | 
|  | unsigned flags) | 
|  | { | 
|  | struct inode *inode = mapping->host; | 
|  | struct ubifs_info *c = inode->i_sb->s_fs_info; | 
|  | pgoff_t index = pos >> PAGE_SHIFT; | 
|  | struct ubifs_budget_req req = { .new_page = 1 }; | 
|  | int uninitialized_var(err), appending = !!(pos + len > inode->i_size); | 
|  | struct page *page; | 
|  |  | 
|  | dbg_gen("ino %lu, pos %llu, len %u, i_size %lld", | 
|  | inode->i_ino, pos, len, inode->i_size); | 
|  |  | 
|  | /* | 
|  | * At the slow path we have to budget before locking the page, because | 
|  | * budgeting may force write-back, which would wait on locked pages and | 
|  | * deadlock if we had the page locked. At this point we do not know | 
|  | * anything about the page, so assume that this is a new page which is | 
|  | * written to a hole. This corresponds to largest budget. Later the | 
|  | * budget will be amended if this is not true. | 
|  | */ | 
|  | if (appending) | 
|  | /* We are appending data, budget for inode change */ | 
|  | req.dirtied_ino = 1; | 
|  |  | 
|  | err = ubifs_budget_space(c, &req); | 
|  | if (unlikely(err)) | 
|  | return err; | 
|  |  | 
|  | page = grab_cache_page_write_begin(mapping, index, flags); | 
|  | if (unlikely(!page)) { | 
|  | ubifs_release_budget(c, &req); | 
|  | return -ENOMEM; | 
|  | } | 
|  |  | 
|  | if (!PageUptodate(page)) { | 
|  | if (!(pos & ~PAGE_MASK) && len == PAGE_SIZE) | 
|  | SetPageChecked(page); | 
|  | else { | 
|  | err = do_readpage(page); | 
|  | if (err) { | 
|  | unlock_page(page); | 
|  | put_page(page); | 
|  | ubifs_release_budget(c, &req); | 
|  | return err; | 
|  | } | 
|  | } | 
|  |  | 
|  | SetPageUptodate(page); | 
|  | ClearPageError(page); | 
|  | } | 
|  |  | 
|  | if (PagePrivate(page)) | 
|  | /* | 
|  | * The page is dirty, which means it was budgeted twice: | 
|  | *   o first time the budget was allocated by the task which | 
|  | *     made the page dirty and set the PG_private flag; | 
|  | *   o and then we budgeted for it for the second time at the | 
|  | *     very beginning of this function. | 
|  | * | 
|  | * So what we have to do is to release the page budget we | 
|  | * allocated. | 
|  | */ | 
|  | release_new_page_budget(c); | 
|  | else if (!PageChecked(page)) | 
|  | /* | 
|  | * We are changing a page which already exists on the media. | 
|  | * This means that changing the page does not make the amount | 
|  | * of indexing information larger, and this part of the budget | 
|  | * which we have already acquired may be released. | 
|  | */ | 
|  | ubifs_convert_page_budget(c); | 
|  |  | 
|  | if (appending) { | 
|  | struct ubifs_inode *ui = ubifs_inode(inode); | 
|  |  | 
|  | /* | 
|  | * 'ubifs_write_end()' is optimized from the fast-path part of | 
|  | * 'ubifs_write_begin()' and expects the @ui_mutex to be locked | 
|  | * if data is appended. | 
|  | */ | 
|  | mutex_lock(&ui->ui_mutex); | 
|  | if (ui->dirty) | 
|  | /* | 
|  | * The inode is dirty already, so we may free the | 
|  | * budget we allocated. | 
|  | */ | 
|  | ubifs_release_dirty_inode_budget(c, ui); | 
|  | } | 
|  |  | 
|  | *pagep = page; | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * allocate_budget - allocate budget for 'ubifs_write_begin()'. | 
|  | * @c: UBIFS file-system description object | 
|  | * @page: page to allocate budget for | 
|  | * @ui: UBIFS inode object the page belongs to | 
|  | * @appending: non-zero if the page is appended | 
|  | * | 
|  | * This is a helper function for 'ubifs_write_begin()' which allocates budget | 
|  | * for the operation. The budget is allocated differently depending on whether | 
|  | * this is appending, whether the page is dirty or not, and so on. This | 
|  | * function leaves the @ui->ui_mutex locked in case of appending. Returns zero | 
|  | * in case of success and %-ENOSPC in case of failure. | 
|  | */ | 
|  | static int allocate_budget(struct ubifs_info *c, struct page *page, | 
|  | struct ubifs_inode *ui, int appending) | 
|  | { | 
|  | struct ubifs_budget_req req = { .fast = 1 }; | 
|  |  | 
|  | if (PagePrivate(page)) { | 
|  | if (!appending) | 
|  | /* | 
|  | * The page is dirty and we are not appending, which | 
|  | * means no budget is needed at all. | 
|  | */ | 
|  | return 0; | 
|  |  | 
|  | mutex_lock(&ui->ui_mutex); | 
|  | if (ui->dirty) | 
|  | /* | 
|  | * The page is dirty and we are appending, so the inode | 
|  | * has to be marked as dirty. However, it is already | 
|  | * dirty, so we do not need any budget. We may return, | 
|  | * but @ui->ui_mutex hast to be left locked because we | 
|  | * should prevent write-back from flushing the inode | 
|  | * and freeing the budget. The lock will be released in | 
|  | * 'ubifs_write_end()'. | 
|  | */ | 
|  | return 0; | 
|  |  | 
|  | /* | 
|  | * The page is dirty, we are appending, the inode is clean, so | 
|  | * we need to budget the inode change. | 
|  | */ | 
|  | req.dirtied_ino = 1; | 
|  | } else { | 
|  | if (PageChecked(page)) | 
|  | /* | 
|  | * The page corresponds to a hole and does not | 
|  | * exist on the media. So changing it makes | 
|  | * make the amount of indexing information | 
|  | * larger, and we have to budget for a new | 
|  | * page. | 
|  | */ | 
|  | req.new_page = 1; | 
|  | else | 
|  | /* | 
|  | * Not a hole, the change will not add any new | 
|  | * indexing information, budget for page | 
|  | * change. | 
|  | */ | 
|  | req.dirtied_page = 1; | 
|  |  | 
|  | if (appending) { | 
|  | mutex_lock(&ui->ui_mutex); | 
|  | if (!ui->dirty) | 
|  | /* | 
|  | * The inode is clean but we will have to mark | 
|  | * it as dirty because we are appending. This | 
|  | * needs a budget. | 
|  | */ | 
|  | req.dirtied_ino = 1; | 
|  | } | 
|  | } | 
|  |  | 
|  | return ubifs_budget_space(c, &req); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * This function is called when a page of data is going to be written. Since | 
|  | * the page of data will not necessarily go to the flash straight away, UBIFS | 
|  | * has to reserve space on the media for it, which is done by means of | 
|  | * budgeting. | 
|  | * | 
|  | * This is the hot-path of the file-system and we are trying to optimize it as | 
|  | * much as possible. For this reasons it is split on 2 parts - slow and fast. | 
|  | * | 
|  | * There many budgeting cases: | 
|  | *     o a new page is appended - we have to budget for a new page and for | 
|  | *       changing the inode; however, if the inode is already dirty, there is | 
|  | *       no need to budget for it; | 
|  | *     o an existing clean page is changed - we have budget for it; if the page | 
|  | *       does not exist on the media (a hole), we have to budget for a new | 
|  | *       page; otherwise, we may budget for changing an existing page; the | 
|  | *       difference between these cases is that changing an existing page does | 
|  | *       not introduce anything new to the FS indexing information, so it does | 
|  | *       not grow, and smaller budget is acquired in this case; | 
|  | *     o an existing dirty page is changed - no need to budget at all, because | 
|  | *       the page budget has been acquired by earlier, when the page has been | 
|  | *       marked dirty. | 
|  | * | 
|  | * UBIFS budgeting sub-system may force write-back if it thinks there is no | 
|  | * space to reserve. This imposes some locking restrictions and makes it | 
|  | * impossible to take into account the above cases, and makes it impossible to | 
|  | * optimize budgeting. | 
|  | * | 
|  | * The solution for this is that the fast path of 'ubifs_write_begin()' assumes | 
|  | * there is a plenty of flash space and the budget will be acquired quickly, | 
|  | * without forcing write-back. The slow path does not make this assumption. | 
|  | */ | 
|  | static int ubifs_write_begin(struct file *file, struct address_space *mapping, | 
|  | loff_t pos, unsigned len, unsigned flags, | 
|  | struct page **pagep, void **fsdata) | 
|  | { | 
|  | struct inode *inode = mapping->host; | 
|  | struct ubifs_info *c = inode->i_sb->s_fs_info; | 
|  | struct ubifs_inode *ui = ubifs_inode(inode); | 
|  | pgoff_t index = pos >> PAGE_SHIFT; | 
|  | int uninitialized_var(err), appending = !!(pos + len > inode->i_size); | 
|  | int skipped_read = 0; | 
|  | struct page *page; | 
|  |  | 
|  | ubifs_assert(c, ubifs_inode(inode)->ui_size == inode->i_size); | 
|  | ubifs_assert(c, !c->ro_media && !c->ro_mount); | 
|  |  | 
|  | if (unlikely(c->ro_error)) | 
|  | return -EROFS; | 
|  |  | 
|  | /* Try out the fast-path part first */ | 
|  | page = grab_cache_page_write_begin(mapping, index, flags); | 
|  | if (unlikely(!page)) | 
|  | return -ENOMEM; | 
|  |  | 
|  | if (!PageUptodate(page)) { | 
|  | /* The page is not loaded from the flash */ | 
|  | if (!(pos & ~PAGE_MASK) && len == PAGE_SIZE) { | 
|  | /* | 
|  | * We change whole page so no need to load it. But we | 
|  | * do not know whether this page exists on the media or | 
|  | * not, so we assume the latter because it requires | 
|  | * larger budget. The assumption is that it is better | 
|  | * to budget a bit more than to read the page from the | 
|  | * media. Thus, we are setting the @PG_checked flag | 
|  | * here. | 
|  | */ | 
|  | SetPageChecked(page); | 
|  | skipped_read = 1; | 
|  | } else { | 
|  | err = do_readpage(page); | 
|  | if (err) { | 
|  | unlock_page(page); | 
|  | put_page(page); | 
|  | return err; | 
|  | } | 
|  | } | 
|  |  | 
|  | SetPageUptodate(page); | 
|  | ClearPageError(page); | 
|  | } | 
|  |  | 
|  | err = allocate_budget(c, page, ui, appending); | 
|  | if (unlikely(err)) { | 
|  | ubifs_assert(c, err == -ENOSPC); | 
|  | /* | 
|  | * If we skipped reading the page because we were going to | 
|  | * write all of it, then it is not up to date. | 
|  | */ | 
|  | if (skipped_read) { | 
|  | ClearPageChecked(page); | 
|  | ClearPageUptodate(page); | 
|  | } | 
|  | /* | 
|  | * Budgeting failed which means it would have to force | 
|  | * write-back but didn't, because we set the @fast flag in the | 
|  | * request. Write-back cannot be done now, while we have the | 
|  | * page locked, because it would deadlock. Unlock and free | 
|  | * everything and fall-back to slow-path. | 
|  | */ | 
|  | if (appending) { | 
|  | ubifs_assert(c, mutex_is_locked(&ui->ui_mutex)); | 
|  | mutex_unlock(&ui->ui_mutex); | 
|  | } | 
|  | unlock_page(page); | 
|  | put_page(page); | 
|  |  | 
|  | return write_begin_slow(mapping, pos, len, pagep, flags); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Whee, we acquired budgeting quickly - without involving | 
|  | * garbage-collection, committing or forcing write-back. We return | 
|  | * with @ui->ui_mutex locked if we are appending pages, and unlocked | 
|  | * otherwise. This is an optimization (slightly hacky though). | 
|  | */ | 
|  | *pagep = page; | 
|  | return 0; | 
|  |  | 
|  | } | 
|  |  | 
|  | /** | 
|  | * cancel_budget - cancel budget. | 
|  | * @c: UBIFS file-system description object | 
|  | * @page: page to cancel budget for | 
|  | * @ui: UBIFS inode object the page belongs to | 
|  | * @appending: non-zero if the page is appended | 
|  | * | 
|  | * This is a helper function for a page write operation. It unlocks the | 
|  | * @ui->ui_mutex in case of appending. | 
|  | */ | 
|  | static void cancel_budget(struct ubifs_info *c, struct page *page, | 
|  | struct ubifs_inode *ui, int appending) | 
|  | { | 
|  | if (appending) { | 
|  | if (!ui->dirty) | 
|  | ubifs_release_dirty_inode_budget(c, ui); | 
|  | mutex_unlock(&ui->ui_mutex); | 
|  | } | 
|  | if (!PagePrivate(page)) { | 
|  | if (PageChecked(page)) | 
|  | release_new_page_budget(c); | 
|  | else | 
|  | release_existing_page_budget(c); | 
|  | } | 
|  | } | 
|  |  | 
|  | static int ubifs_write_end(struct file *file, struct address_space *mapping, | 
|  | loff_t pos, unsigned len, unsigned copied, | 
|  | struct page *page, void *fsdata) | 
|  | { | 
|  | struct inode *inode = mapping->host; | 
|  | struct ubifs_inode *ui = ubifs_inode(inode); | 
|  | struct ubifs_info *c = inode->i_sb->s_fs_info; | 
|  | loff_t end_pos = pos + len; | 
|  | int appending = !!(end_pos > inode->i_size); | 
|  |  | 
|  | dbg_gen("ino %lu, pos %llu, pg %lu, len %u, copied %d, i_size %lld", | 
|  | inode->i_ino, pos, page->index, len, copied, inode->i_size); | 
|  |  | 
|  | if (unlikely(copied < len && len == PAGE_SIZE)) { | 
|  | /* | 
|  | * VFS copied less data to the page that it intended and | 
|  | * declared in its '->write_begin()' call via the @len | 
|  | * argument. If the page was not up-to-date, and @len was | 
|  | * @PAGE_SIZE, the 'ubifs_write_begin()' function did | 
|  | * not load it from the media (for optimization reasons). This | 
|  | * means that part of the page contains garbage. So read the | 
|  | * page now. | 
|  | */ | 
|  | dbg_gen("copied %d instead of %d, read page and repeat", | 
|  | copied, len); | 
|  | cancel_budget(c, page, ui, appending); | 
|  | ClearPageChecked(page); | 
|  |  | 
|  | /* | 
|  | * Return 0 to force VFS to repeat the whole operation, or the | 
|  | * error code if 'do_readpage()' fails. | 
|  | */ | 
|  | copied = do_readpage(page); | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | if (!PagePrivate(page)) { | 
|  | SetPagePrivate(page); | 
|  | atomic_long_inc(&c->dirty_pg_cnt); | 
|  | __set_page_dirty_nobuffers(page); | 
|  | } | 
|  |  | 
|  | if (appending) { | 
|  | i_size_write(inode, end_pos); | 
|  | ui->ui_size = end_pos; | 
|  | /* | 
|  | * Note, we do not set @I_DIRTY_PAGES (which means that the | 
|  | * inode has dirty pages), this has been done in | 
|  | * '__set_page_dirty_nobuffers()'. | 
|  | */ | 
|  | __mark_inode_dirty(inode, I_DIRTY_DATASYNC); | 
|  | ubifs_assert(c, mutex_is_locked(&ui->ui_mutex)); | 
|  | mutex_unlock(&ui->ui_mutex); | 
|  | } | 
|  |  | 
|  | out: | 
|  | unlock_page(page); | 
|  | put_page(page); | 
|  | return copied; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * populate_page - copy data nodes into a page for bulk-read. | 
|  | * @c: UBIFS file-system description object | 
|  | * @page: page | 
|  | * @bu: bulk-read information | 
|  | * @n: next zbranch slot | 
|  | * | 
|  | * This function returns %0 on success and a negative error code on failure. | 
|  | */ | 
|  | static int populate_page(struct ubifs_info *c, struct page *page, | 
|  | struct bu_info *bu, int *n) | 
|  | { | 
|  | int i = 0, nn = *n, offs = bu->zbranch[0].offs, hole = 0, read = 0; | 
|  | struct inode *inode = page->mapping->host; | 
|  | loff_t i_size = i_size_read(inode); | 
|  | unsigned int page_block; | 
|  | void *addr, *zaddr; | 
|  | pgoff_t end_index; | 
|  |  | 
|  | dbg_gen("ino %lu, pg %lu, i_size %lld, flags %#lx", | 
|  | inode->i_ino, page->index, i_size, page->flags); | 
|  |  | 
|  | addr = zaddr = kmap(page); | 
|  |  | 
|  | end_index = (i_size - 1) >> PAGE_SHIFT; | 
|  | if (!i_size || page->index > end_index) { | 
|  | hole = 1; | 
|  | memset(addr, 0, PAGE_SIZE); | 
|  | goto out_hole; | 
|  | } | 
|  |  | 
|  | page_block = page->index << UBIFS_BLOCKS_PER_PAGE_SHIFT; | 
|  | while (1) { | 
|  | int err, len, out_len, dlen; | 
|  |  | 
|  | if (nn >= bu->cnt) { | 
|  | hole = 1; | 
|  | memset(addr, 0, UBIFS_BLOCK_SIZE); | 
|  | } else if (key_block(c, &bu->zbranch[nn].key) == page_block) { | 
|  | struct ubifs_data_node *dn; | 
|  |  | 
|  | dn = bu->buf + (bu->zbranch[nn].offs - offs); | 
|  |  | 
|  | ubifs_assert(c, le64_to_cpu(dn->ch.sqnum) > | 
|  | ubifs_inode(inode)->creat_sqnum); | 
|  |  | 
|  | len = le32_to_cpu(dn->size); | 
|  | if (len <= 0 || len > UBIFS_BLOCK_SIZE) | 
|  | goto out_err; | 
|  |  | 
|  | dlen = le32_to_cpu(dn->ch.len) - UBIFS_DATA_NODE_SZ; | 
|  | out_len = UBIFS_BLOCK_SIZE; | 
|  |  | 
|  | if (ubifs_crypt_is_encrypted(inode)) { | 
|  | err = ubifs_decrypt(inode, dn, &dlen, page_block); | 
|  | if (err) | 
|  | goto out_err; | 
|  | } | 
|  |  | 
|  | err = ubifs_decompress(c, &dn->data, dlen, addr, &out_len, | 
|  | le16_to_cpu(dn->compr_type)); | 
|  | if (err || len != out_len) | 
|  | goto out_err; | 
|  |  | 
|  | if (len < UBIFS_BLOCK_SIZE) | 
|  | memset(addr + len, 0, UBIFS_BLOCK_SIZE - len); | 
|  |  | 
|  | nn += 1; | 
|  | read = (i << UBIFS_BLOCK_SHIFT) + len; | 
|  | } else if (key_block(c, &bu->zbranch[nn].key) < page_block) { | 
|  | nn += 1; | 
|  | continue; | 
|  | } else { | 
|  | hole = 1; | 
|  | memset(addr, 0, UBIFS_BLOCK_SIZE); | 
|  | } | 
|  | if (++i >= UBIFS_BLOCKS_PER_PAGE) | 
|  | break; | 
|  | addr += UBIFS_BLOCK_SIZE; | 
|  | page_block += 1; | 
|  | } | 
|  |  | 
|  | if (end_index == page->index) { | 
|  | int len = i_size & (PAGE_SIZE - 1); | 
|  |  | 
|  | if (len && len < read) | 
|  | memset(zaddr + len, 0, read - len); | 
|  | } | 
|  |  | 
|  | out_hole: | 
|  | if (hole) { | 
|  | SetPageChecked(page); | 
|  | dbg_gen("hole"); | 
|  | } | 
|  |  | 
|  | SetPageUptodate(page); | 
|  | ClearPageError(page); | 
|  | flush_dcache_page(page); | 
|  | kunmap(page); | 
|  | *n = nn; | 
|  | return 0; | 
|  |  | 
|  | out_err: | 
|  | ClearPageUptodate(page); | 
|  | SetPageError(page); | 
|  | flush_dcache_page(page); | 
|  | kunmap(page); | 
|  | ubifs_err(c, "bad data node (block %u, inode %lu)", | 
|  | page_block, inode->i_ino); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * ubifs_do_bulk_read - do bulk-read. | 
|  | * @c: UBIFS file-system description object | 
|  | * @bu: bulk-read information | 
|  | * @page1: first page to read | 
|  | * | 
|  | * This function returns %1 if the bulk-read is done, otherwise %0 is returned. | 
|  | */ | 
|  | static int ubifs_do_bulk_read(struct ubifs_info *c, struct bu_info *bu, | 
|  | struct page *page1) | 
|  | { | 
|  | pgoff_t offset = page1->index, end_index; | 
|  | struct address_space *mapping = page1->mapping; | 
|  | struct inode *inode = mapping->host; | 
|  | struct ubifs_inode *ui = ubifs_inode(inode); | 
|  | int err, page_idx, page_cnt, ret = 0, n = 0; | 
|  | int allocate = bu->buf ? 0 : 1; | 
|  | loff_t isize; | 
|  | gfp_t ra_gfp_mask = readahead_gfp_mask(mapping) & ~__GFP_FS; | 
|  |  | 
|  | err = ubifs_tnc_get_bu_keys(c, bu); | 
|  | if (err) | 
|  | goto out_warn; | 
|  |  | 
|  | if (bu->eof) { | 
|  | /* Turn off bulk-read at the end of the file */ | 
|  | ui->read_in_a_row = 1; | 
|  | ui->bulk_read = 0; | 
|  | } | 
|  |  | 
|  | page_cnt = bu->blk_cnt >> UBIFS_BLOCKS_PER_PAGE_SHIFT; | 
|  | if (!page_cnt) { | 
|  | /* | 
|  | * This happens when there are multiple blocks per page and the | 
|  | * blocks for the first page we are looking for, are not | 
|  | * together. If all the pages were like this, bulk-read would | 
|  | * reduce performance, so we turn it off for a while. | 
|  | */ | 
|  | goto out_bu_off; | 
|  | } | 
|  |  | 
|  | if (bu->cnt) { | 
|  | if (allocate) { | 
|  | /* | 
|  | * Allocate bulk-read buffer depending on how many data | 
|  | * nodes we are going to read. | 
|  | */ | 
|  | bu->buf_len = bu->zbranch[bu->cnt - 1].offs + | 
|  | bu->zbranch[bu->cnt - 1].len - | 
|  | bu->zbranch[0].offs; | 
|  | ubifs_assert(c, bu->buf_len > 0); | 
|  | ubifs_assert(c, bu->buf_len <= c->leb_size); | 
|  | bu->buf = kmalloc(bu->buf_len, GFP_NOFS | __GFP_NOWARN); | 
|  | if (!bu->buf) | 
|  | goto out_bu_off; | 
|  | } | 
|  |  | 
|  | err = ubifs_tnc_bulk_read(c, bu); | 
|  | if (err) | 
|  | goto out_warn; | 
|  | } | 
|  |  | 
|  | err = populate_page(c, page1, bu, &n); | 
|  | if (err) | 
|  | goto out_warn; | 
|  |  | 
|  | unlock_page(page1); | 
|  | ret = 1; | 
|  |  | 
|  | isize = i_size_read(inode); | 
|  | if (isize == 0) | 
|  | goto out_free; | 
|  | end_index = ((isize - 1) >> PAGE_SHIFT); | 
|  |  | 
|  | for (page_idx = 1; page_idx < page_cnt; page_idx++) { | 
|  | pgoff_t page_offset = offset + page_idx; | 
|  | struct page *page; | 
|  |  | 
|  | if (page_offset > end_index) | 
|  | break; | 
|  | page = find_or_create_page(mapping, page_offset, ra_gfp_mask); | 
|  | if (!page) | 
|  | break; | 
|  | if (!PageUptodate(page)) | 
|  | err = populate_page(c, page, bu, &n); | 
|  | unlock_page(page); | 
|  | put_page(page); | 
|  | if (err) | 
|  | break; | 
|  | } | 
|  |  | 
|  | ui->last_page_read = offset + page_idx - 1; | 
|  |  | 
|  | out_free: | 
|  | if (allocate) | 
|  | kfree(bu->buf); | 
|  | return ret; | 
|  |  | 
|  | out_warn: | 
|  | ubifs_warn(c, "ignoring error %d and skipping bulk-read", err); | 
|  | goto out_free; | 
|  |  | 
|  | out_bu_off: | 
|  | ui->read_in_a_row = ui->bulk_read = 0; | 
|  | goto out_free; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * ubifs_bulk_read - determine whether to bulk-read and, if so, do it. | 
|  | * @page: page from which to start bulk-read. | 
|  | * | 
|  | * Some flash media are capable of reading sequentially at faster rates. UBIFS | 
|  | * bulk-read facility is designed to take advantage of that, by reading in one | 
|  | * go consecutive data nodes that are also located consecutively in the same | 
|  | * LEB. This function returns %1 if a bulk-read is done and %0 otherwise. | 
|  | */ | 
|  | static int ubifs_bulk_read(struct page *page) | 
|  | { | 
|  | struct inode *inode = page->mapping->host; | 
|  | struct ubifs_info *c = inode->i_sb->s_fs_info; | 
|  | struct ubifs_inode *ui = ubifs_inode(inode); | 
|  | pgoff_t index = page->index, last_page_read = ui->last_page_read; | 
|  | struct bu_info *bu; | 
|  | int err = 0, allocated = 0; | 
|  |  | 
|  | ui->last_page_read = index; | 
|  | if (!c->bulk_read) | 
|  | return 0; | 
|  |  | 
|  | /* | 
|  | * Bulk-read is protected by @ui->ui_mutex, but it is an optimization, | 
|  | * so don't bother if we cannot lock the mutex. | 
|  | */ | 
|  | if (!mutex_trylock(&ui->ui_mutex)) | 
|  | return 0; | 
|  |  | 
|  | if (index != last_page_read + 1) { | 
|  | /* Turn off bulk-read if we stop reading sequentially */ | 
|  | ui->read_in_a_row = 1; | 
|  | if (ui->bulk_read) | 
|  | ui->bulk_read = 0; | 
|  | goto out_unlock; | 
|  | } | 
|  |  | 
|  | if (!ui->bulk_read) { | 
|  | ui->read_in_a_row += 1; | 
|  | if (ui->read_in_a_row < 3) | 
|  | goto out_unlock; | 
|  | /* Three reads in a row, so switch on bulk-read */ | 
|  | ui->bulk_read = 1; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * If possible, try to use pre-allocated bulk-read information, which | 
|  | * is protected by @c->bu_mutex. | 
|  | */ | 
|  | if (mutex_trylock(&c->bu_mutex)) | 
|  | bu = &c->bu; | 
|  | else { | 
|  | bu = kmalloc(sizeof(struct bu_info), GFP_NOFS | __GFP_NOWARN); | 
|  | if (!bu) | 
|  | goto out_unlock; | 
|  |  | 
|  | bu->buf = NULL; | 
|  | allocated = 1; | 
|  | } | 
|  |  | 
|  | bu->buf_len = c->max_bu_buf_len; | 
|  | data_key_init(c, &bu->key, inode->i_ino, | 
|  | page->index << UBIFS_BLOCKS_PER_PAGE_SHIFT); | 
|  | err = ubifs_do_bulk_read(c, bu, page); | 
|  |  | 
|  | if (!allocated) | 
|  | mutex_unlock(&c->bu_mutex); | 
|  | else | 
|  | kfree(bu); | 
|  |  | 
|  | out_unlock: | 
|  | mutex_unlock(&ui->ui_mutex); | 
|  | return err; | 
|  | } | 
|  |  | 
|  | static int ubifs_readpage(struct file *file, struct page *page) | 
|  | { | 
|  | if (ubifs_bulk_read(page)) | 
|  | return 0; | 
|  | do_readpage(page); | 
|  | unlock_page(page); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int do_writepage(struct page *page, int len) | 
|  | { | 
|  | int err = 0, i, blen; | 
|  | unsigned int block; | 
|  | void *addr; | 
|  | union ubifs_key key; | 
|  | struct inode *inode = page->mapping->host; | 
|  | struct ubifs_info *c = inode->i_sb->s_fs_info; | 
|  |  | 
|  | #ifdef UBIFS_DEBUG | 
|  | struct ubifs_inode *ui = ubifs_inode(inode); | 
|  | spin_lock(&ui->ui_lock); | 
|  | ubifs_assert(c, page->index <= ui->synced_i_size >> PAGE_SHIFT); | 
|  | spin_unlock(&ui->ui_lock); | 
|  | #endif | 
|  |  | 
|  | /* Update radix tree tags */ | 
|  | set_page_writeback(page); | 
|  |  | 
|  | addr = kmap(page); | 
|  | block = page->index << UBIFS_BLOCKS_PER_PAGE_SHIFT; | 
|  | i = 0; | 
|  | while (len) { | 
|  | blen = min_t(int, len, UBIFS_BLOCK_SIZE); | 
|  | data_key_init(c, &key, inode->i_ino, block); | 
|  | err = ubifs_jnl_write_data(c, inode, &key, addr, blen); | 
|  | if (err) | 
|  | break; | 
|  | if (++i >= UBIFS_BLOCKS_PER_PAGE) | 
|  | break; | 
|  | block += 1; | 
|  | addr += blen; | 
|  | len -= blen; | 
|  | } | 
|  | if (err) { | 
|  | SetPageError(page); | 
|  | ubifs_err(c, "cannot write page %lu of inode %lu, error %d", | 
|  | page->index, inode->i_ino, err); | 
|  | ubifs_ro_mode(c, err); | 
|  | } | 
|  |  | 
|  | ubifs_assert(c, PagePrivate(page)); | 
|  | if (PageChecked(page)) | 
|  | release_new_page_budget(c); | 
|  | else | 
|  | release_existing_page_budget(c); | 
|  |  | 
|  | atomic_long_dec(&c->dirty_pg_cnt); | 
|  | ClearPagePrivate(page); | 
|  | ClearPageChecked(page); | 
|  |  | 
|  | kunmap(page); | 
|  | unlock_page(page); | 
|  | end_page_writeback(page); | 
|  | return err; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * When writing-back dirty inodes, VFS first writes-back pages belonging to the | 
|  | * inode, then the inode itself. For UBIFS this may cause a problem. Consider a | 
|  | * situation when a we have an inode with size 0, then a megabyte of data is | 
|  | * appended to the inode, then write-back starts and flushes some amount of the | 
|  | * dirty pages, the journal becomes full, commit happens and finishes, and then | 
|  | * an unclean reboot happens. When the file system is mounted next time, the | 
|  | * inode size would still be 0, but there would be many pages which are beyond | 
|  | * the inode size, they would be indexed and consume flash space. Because the | 
|  | * journal has been committed, the replay would not be able to detect this | 
|  | * situation and correct the inode size. This means UBIFS would have to scan | 
|  | * whole index and correct all inode sizes, which is long an unacceptable. | 
|  | * | 
|  | * To prevent situations like this, UBIFS writes pages back only if they are | 
|  | * within the last synchronized inode size, i.e. the size which has been | 
|  | * written to the flash media last time. Otherwise, UBIFS forces inode | 
|  | * write-back, thus making sure the on-flash inode contains current inode size, | 
|  | * and then keeps writing pages back. | 
|  | * | 
|  | * Some locking issues explanation. 'ubifs_writepage()' first is called with | 
|  | * the page locked, and it locks @ui_mutex. However, write-back does take inode | 
|  | * @i_mutex, which means other VFS operations may be run on this inode at the | 
|  | * same time. And the problematic one is truncation to smaller size, from where | 
|  | * we have to call 'truncate_setsize()', which first changes @inode->i_size, | 
|  | * then drops the truncated pages. And while dropping the pages, it takes the | 
|  | * page lock. This means that 'do_truncation()' cannot call 'truncate_setsize()' | 
|  | * with @ui_mutex locked, because it would deadlock with 'ubifs_writepage()'. | 
|  | * This means that @inode->i_size is changed while @ui_mutex is unlocked. | 
|  | * | 
|  | * XXX(truncate): with the new truncate sequence this is not true anymore, | 
|  | * and the calls to truncate_setsize can be move around freely.  They should | 
|  | * be moved to the very end of the truncate sequence. | 
|  | * | 
|  | * But in 'ubifs_writepage()' we have to guarantee that we do not write beyond | 
|  | * inode size. How do we do this if @inode->i_size may became smaller while we | 
|  | * are in the middle of 'ubifs_writepage()'? The UBIFS solution is the | 
|  | * @ui->ui_isize "shadow" field which UBIFS uses instead of @inode->i_size | 
|  | * internally and updates it under @ui_mutex. | 
|  | * | 
|  | * Q: why we do not worry that if we race with truncation, we may end up with a | 
|  | * situation when the inode is truncated while we are in the middle of | 
|  | * 'do_writepage()', so we do write beyond inode size? | 
|  | * A: If we are in the middle of 'do_writepage()', truncation would be locked | 
|  | * on the page lock and it would not write the truncated inode node to the | 
|  | * journal before we have finished. | 
|  | */ | 
|  | static int ubifs_writepage(struct page *page, struct writeback_control *wbc) | 
|  | { | 
|  | struct inode *inode = page->mapping->host; | 
|  | struct ubifs_info *c = inode->i_sb->s_fs_info; | 
|  | struct ubifs_inode *ui = ubifs_inode(inode); | 
|  | loff_t i_size =  i_size_read(inode), synced_i_size; | 
|  | pgoff_t end_index = i_size >> PAGE_SHIFT; | 
|  | int err, len = i_size & (PAGE_SIZE - 1); | 
|  | void *kaddr; | 
|  |  | 
|  | dbg_gen("ino %lu, pg %lu, pg flags %#lx", | 
|  | inode->i_ino, page->index, page->flags); | 
|  | ubifs_assert(c, PagePrivate(page)); | 
|  |  | 
|  | /* Is the page fully outside @i_size? (truncate in progress) */ | 
|  | if (page->index > end_index || (page->index == end_index && !len)) { | 
|  | err = 0; | 
|  | goto out_unlock; | 
|  | } | 
|  |  | 
|  | spin_lock(&ui->ui_lock); | 
|  | synced_i_size = ui->synced_i_size; | 
|  | spin_unlock(&ui->ui_lock); | 
|  |  | 
|  | /* Is the page fully inside @i_size? */ | 
|  | if (page->index < end_index) { | 
|  | if (page->index >= synced_i_size >> PAGE_SHIFT) { | 
|  | err = inode->i_sb->s_op->write_inode(inode, NULL); | 
|  | if (err) | 
|  | goto out_unlock; | 
|  | /* | 
|  | * The inode has been written, but the write-buffer has | 
|  | * not been synchronized, so in case of an unclean | 
|  | * reboot we may end up with some pages beyond inode | 
|  | * size, but they would be in the journal (because | 
|  | * commit flushes write buffers) and recovery would deal | 
|  | * with this. | 
|  | */ | 
|  | } | 
|  | return do_writepage(page, PAGE_SIZE); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * The page straddles @i_size. It must be zeroed out on each and every | 
|  | * writepage invocation because it may be mmapped. "A file is mapped | 
|  | * in multiples of the page size. For a file that is not a multiple of | 
|  | * the page size, the remaining memory is zeroed when mapped, and | 
|  | * writes to that region are not written out to the file." | 
|  | */ | 
|  | kaddr = kmap_atomic(page); | 
|  | memset(kaddr + len, 0, PAGE_SIZE - len); | 
|  | flush_dcache_page(page); | 
|  | kunmap_atomic(kaddr); | 
|  |  | 
|  | if (i_size > synced_i_size) { | 
|  | err = inode->i_sb->s_op->write_inode(inode, NULL); | 
|  | if (err) | 
|  | goto out_unlock; | 
|  | } | 
|  |  | 
|  | return do_writepage(page, len); | 
|  |  | 
|  | out_unlock: | 
|  | unlock_page(page); | 
|  | return err; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * do_attr_changes - change inode attributes. | 
|  | * @inode: inode to change attributes for | 
|  | * @attr: describes attributes to change | 
|  | */ | 
|  | static void do_attr_changes(struct inode *inode, const struct iattr *attr) | 
|  | { | 
|  | if (attr->ia_valid & ATTR_UID) | 
|  | inode->i_uid = attr->ia_uid; | 
|  | if (attr->ia_valid & ATTR_GID) | 
|  | inode->i_gid = attr->ia_gid; | 
|  | if (attr->ia_valid & ATTR_ATIME) | 
|  | inode->i_atime = timespec64_trunc(attr->ia_atime, | 
|  | inode->i_sb->s_time_gran); | 
|  | if (attr->ia_valid & ATTR_MTIME) | 
|  | inode->i_mtime = timespec64_trunc(attr->ia_mtime, | 
|  | inode->i_sb->s_time_gran); | 
|  | if (attr->ia_valid & ATTR_CTIME) | 
|  | inode->i_ctime = timespec64_trunc(attr->ia_ctime, | 
|  | inode->i_sb->s_time_gran); | 
|  | if (attr->ia_valid & ATTR_MODE) { | 
|  | umode_t mode = attr->ia_mode; | 
|  |  | 
|  | if (!in_group_p(inode->i_gid) && !capable(CAP_FSETID)) | 
|  | mode &= ~S_ISGID; | 
|  | inode->i_mode = mode; | 
|  | } | 
|  | } | 
|  |  | 
|  | /** | 
|  | * do_truncation - truncate an inode. | 
|  | * @c: UBIFS file-system description object | 
|  | * @inode: inode to truncate | 
|  | * @attr: inode attribute changes description | 
|  | * | 
|  | * This function implements VFS '->setattr()' call when the inode is truncated | 
|  | * to a smaller size. Returns zero in case of success and a negative error code | 
|  | * in case of failure. | 
|  | */ | 
|  | static int do_truncation(struct ubifs_info *c, struct inode *inode, | 
|  | const struct iattr *attr) | 
|  | { | 
|  | int err; | 
|  | struct ubifs_budget_req req; | 
|  | loff_t old_size = inode->i_size, new_size = attr->ia_size; | 
|  | int offset = new_size & (UBIFS_BLOCK_SIZE - 1), budgeted = 1; | 
|  | struct ubifs_inode *ui = ubifs_inode(inode); | 
|  |  | 
|  | dbg_gen("ino %lu, size %lld -> %lld", inode->i_ino, old_size, new_size); | 
|  | memset(&req, 0, sizeof(struct ubifs_budget_req)); | 
|  |  | 
|  | /* | 
|  | * If this is truncation to a smaller size, and we do not truncate on a | 
|  | * block boundary, budget for changing one data block, because the last | 
|  | * block will be re-written. | 
|  | */ | 
|  | if (new_size & (UBIFS_BLOCK_SIZE - 1)) | 
|  | req.dirtied_page = 1; | 
|  |  | 
|  | req.dirtied_ino = 1; | 
|  | /* A funny way to budget for truncation node */ | 
|  | req.dirtied_ino_d = UBIFS_TRUN_NODE_SZ; | 
|  | err = ubifs_budget_space(c, &req); | 
|  | if (err) { | 
|  | /* | 
|  | * Treat truncations to zero as deletion and always allow them, | 
|  | * just like we do for '->unlink()'. | 
|  | */ | 
|  | if (new_size || err != -ENOSPC) | 
|  | return err; | 
|  | budgeted = 0; | 
|  | } | 
|  |  | 
|  | truncate_setsize(inode, new_size); | 
|  |  | 
|  | if (offset) { | 
|  | pgoff_t index = new_size >> PAGE_SHIFT; | 
|  | struct page *page; | 
|  |  | 
|  | page = find_lock_page(inode->i_mapping, index); | 
|  | if (page) { | 
|  | if (PageDirty(page)) { | 
|  | /* | 
|  | * 'ubifs_jnl_truncate()' will try to truncate | 
|  | * the last data node, but it contains | 
|  | * out-of-date data because the page is dirty. | 
|  | * Write the page now, so that | 
|  | * 'ubifs_jnl_truncate()' will see an already | 
|  | * truncated (and up to date) data node. | 
|  | */ | 
|  | ubifs_assert(c, PagePrivate(page)); | 
|  |  | 
|  | clear_page_dirty_for_io(page); | 
|  | if (UBIFS_BLOCKS_PER_PAGE_SHIFT) | 
|  | offset = new_size & | 
|  | (PAGE_SIZE - 1); | 
|  | err = do_writepage(page, offset); | 
|  | put_page(page); | 
|  | if (err) | 
|  | goto out_budg; | 
|  | /* | 
|  | * We could now tell 'ubifs_jnl_truncate()' not | 
|  | * to read the last block. | 
|  | */ | 
|  | } else { | 
|  | /* | 
|  | * We could 'kmap()' the page and pass the data | 
|  | * to 'ubifs_jnl_truncate()' to save it from | 
|  | * having to read it. | 
|  | */ | 
|  | unlock_page(page); | 
|  | put_page(page); | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | mutex_lock(&ui->ui_mutex); | 
|  | ui->ui_size = inode->i_size; | 
|  | /* Truncation changes inode [mc]time */ | 
|  | inode->i_mtime = inode->i_ctime = current_time(inode); | 
|  | /* Other attributes may be changed at the same time as well */ | 
|  | do_attr_changes(inode, attr); | 
|  | err = ubifs_jnl_truncate(c, inode, old_size, new_size); | 
|  | mutex_unlock(&ui->ui_mutex); | 
|  |  | 
|  | out_budg: | 
|  | if (budgeted) | 
|  | ubifs_release_budget(c, &req); | 
|  | else { | 
|  | c->bi.nospace = c->bi.nospace_rp = 0; | 
|  | smp_wmb(); | 
|  | } | 
|  | return err; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * do_setattr - change inode attributes. | 
|  | * @c: UBIFS file-system description object | 
|  | * @inode: inode to change attributes for | 
|  | * @attr: inode attribute changes description | 
|  | * | 
|  | * This function implements VFS '->setattr()' call for all cases except | 
|  | * truncations to smaller size. Returns zero in case of success and a negative | 
|  | * error code in case of failure. | 
|  | */ | 
|  | static int do_setattr(struct ubifs_info *c, struct inode *inode, | 
|  | const struct iattr *attr) | 
|  | { | 
|  | int err, release; | 
|  | loff_t new_size = attr->ia_size; | 
|  | struct ubifs_inode *ui = ubifs_inode(inode); | 
|  | struct ubifs_budget_req req = { .dirtied_ino = 1, | 
|  | .dirtied_ino_d = ALIGN(ui->data_len, 8) }; | 
|  |  | 
|  | err = ubifs_budget_space(c, &req); | 
|  | if (err) | 
|  | return err; | 
|  |  | 
|  | if (attr->ia_valid & ATTR_SIZE) { | 
|  | dbg_gen("size %lld -> %lld", inode->i_size, new_size); | 
|  | truncate_setsize(inode, new_size); | 
|  | } | 
|  |  | 
|  | mutex_lock(&ui->ui_mutex); | 
|  | if (attr->ia_valid & ATTR_SIZE) { | 
|  | /* Truncation changes inode [mc]time */ | 
|  | inode->i_mtime = inode->i_ctime = current_time(inode); | 
|  | /* 'truncate_setsize()' changed @i_size, update @ui_size */ | 
|  | ui->ui_size = inode->i_size; | 
|  | } | 
|  |  | 
|  | do_attr_changes(inode, attr); | 
|  |  | 
|  | release = ui->dirty; | 
|  | if (attr->ia_valid & ATTR_SIZE) | 
|  | /* | 
|  | * Inode length changed, so we have to make sure | 
|  | * @I_DIRTY_DATASYNC is set. | 
|  | */ | 
|  | __mark_inode_dirty(inode, I_DIRTY_DATASYNC); | 
|  | else | 
|  | mark_inode_dirty_sync(inode); | 
|  | mutex_unlock(&ui->ui_mutex); | 
|  |  | 
|  | if (release) | 
|  | ubifs_release_budget(c, &req); | 
|  | if (IS_SYNC(inode)) | 
|  | err = inode->i_sb->s_op->write_inode(inode, NULL); | 
|  | return err; | 
|  | } | 
|  |  | 
|  | int ubifs_setattr(struct dentry *dentry, struct iattr *attr) | 
|  | { | 
|  | int err; | 
|  | struct inode *inode = d_inode(dentry); | 
|  | struct ubifs_info *c = inode->i_sb->s_fs_info; | 
|  |  | 
|  | dbg_gen("ino %lu, mode %#x, ia_valid %#x", | 
|  | inode->i_ino, inode->i_mode, attr->ia_valid); | 
|  | err = setattr_prepare(dentry, attr); | 
|  | if (err) | 
|  | return err; | 
|  |  | 
|  | err = dbg_check_synced_i_size(c, inode); | 
|  | if (err) | 
|  | return err; | 
|  |  | 
|  | err = fscrypt_prepare_setattr(dentry, attr); | 
|  | if (err) | 
|  | return err; | 
|  |  | 
|  | if ((attr->ia_valid & ATTR_SIZE) && attr->ia_size < inode->i_size) | 
|  | /* Truncation to a smaller size */ | 
|  | err = do_truncation(c, inode, attr); | 
|  | else | 
|  | err = do_setattr(c, inode, attr); | 
|  |  | 
|  | return err; | 
|  | } | 
|  |  | 
|  | static void ubifs_invalidatepage(struct page *page, unsigned int offset, | 
|  | unsigned int length) | 
|  | { | 
|  | struct inode *inode = page->mapping->host; | 
|  | struct ubifs_info *c = inode->i_sb->s_fs_info; | 
|  |  | 
|  | ubifs_assert(c, PagePrivate(page)); | 
|  | if (offset || length < PAGE_SIZE) | 
|  | /* Partial page remains dirty */ | 
|  | return; | 
|  |  | 
|  | if (PageChecked(page)) | 
|  | release_new_page_budget(c); | 
|  | else | 
|  | release_existing_page_budget(c); | 
|  |  | 
|  | atomic_long_dec(&c->dirty_pg_cnt); | 
|  | ClearPagePrivate(page); | 
|  | ClearPageChecked(page); | 
|  | } | 
|  |  | 
|  | int ubifs_fsync(struct file *file, loff_t start, loff_t end, int datasync) | 
|  | { | 
|  | struct inode *inode = file->f_mapping->host; | 
|  | struct ubifs_info *c = inode->i_sb->s_fs_info; | 
|  | int err; | 
|  |  | 
|  | dbg_gen("syncing inode %lu", inode->i_ino); | 
|  |  | 
|  | if (c->ro_mount) | 
|  | /* | 
|  | * For some really strange reasons VFS does not filter out | 
|  | * 'fsync()' for R/O mounted file-systems as per 2.6.39. | 
|  | */ | 
|  | return 0; | 
|  |  | 
|  | err = file_write_and_wait_range(file, start, end); | 
|  | if (err) | 
|  | return err; | 
|  | inode_lock(inode); | 
|  |  | 
|  | /* Synchronize the inode unless this is a 'datasync()' call. */ | 
|  | if (!datasync || (inode->i_state & I_DIRTY_DATASYNC)) { | 
|  | err = inode->i_sb->s_op->write_inode(inode, NULL); | 
|  | if (err) | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Nodes related to this inode may still sit in a write-buffer. Flush | 
|  | * them. | 
|  | */ | 
|  | err = ubifs_sync_wbufs_by_inode(c, inode); | 
|  | out: | 
|  | inode_unlock(inode); | 
|  | return err; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * mctime_update_needed - check if mtime or ctime update is needed. | 
|  | * @inode: the inode to do the check for | 
|  | * @now: current time | 
|  | * | 
|  | * This helper function checks if the inode mtime/ctime should be updated or | 
|  | * not. If current values of the time-stamps are within the UBIFS inode time | 
|  | * granularity, they are not updated. This is an optimization. | 
|  | */ | 
|  | static inline int mctime_update_needed(const struct inode *inode, | 
|  | const struct timespec64 *now) | 
|  | { | 
|  | if (!timespec64_equal(&inode->i_mtime, now) || | 
|  | !timespec64_equal(&inode->i_ctime, now)) | 
|  | return 1; | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | #ifdef CONFIG_UBIFS_ATIME_SUPPORT | 
|  | /** | 
|  | * ubifs_update_time - update time of inode. | 
|  | * @inode: inode to update | 
|  | * | 
|  | * This function updates time of the inode. | 
|  | */ | 
|  | int ubifs_update_time(struct inode *inode, struct timespec64 *time, | 
|  | int flags) | 
|  | { | 
|  | struct ubifs_inode *ui = ubifs_inode(inode); | 
|  | struct ubifs_info *c = inode->i_sb->s_fs_info; | 
|  | struct ubifs_budget_req req = { .dirtied_ino = 1, | 
|  | .dirtied_ino_d = ALIGN(ui->data_len, 8) }; | 
|  | int iflags = I_DIRTY_TIME; | 
|  | int err, release; | 
|  |  | 
|  | err = ubifs_budget_space(c, &req); | 
|  | if (err) | 
|  | return err; | 
|  |  | 
|  | mutex_lock(&ui->ui_mutex); | 
|  | if (flags & S_ATIME) | 
|  | inode->i_atime = *time; | 
|  | if (flags & S_CTIME) | 
|  | inode->i_ctime = *time; | 
|  | if (flags & S_MTIME) | 
|  | inode->i_mtime = *time; | 
|  |  | 
|  | if (!(inode->i_sb->s_flags & SB_LAZYTIME)) | 
|  | iflags |= I_DIRTY_SYNC; | 
|  |  | 
|  | release = ui->dirty; | 
|  | __mark_inode_dirty(inode, iflags); | 
|  | mutex_unlock(&ui->ui_mutex); | 
|  | if (release) | 
|  | ubifs_release_budget(c, &req); | 
|  | return 0; | 
|  | } | 
|  | #endif | 
|  |  | 
|  | /** | 
|  | * update_mctime - update mtime and ctime of an inode. | 
|  | * @inode: inode to update | 
|  | * | 
|  | * This function updates mtime and ctime of the inode if it is not equivalent to | 
|  | * current time. Returns zero in case of success and a negative error code in | 
|  | * case of failure. | 
|  | */ | 
|  | static int update_mctime(struct inode *inode) | 
|  | { | 
|  | struct timespec64 now = current_time(inode); | 
|  | struct ubifs_inode *ui = ubifs_inode(inode); | 
|  | struct ubifs_info *c = inode->i_sb->s_fs_info; | 
|  |  | 
|  | if (mctime_update_needed(inode, &now)) { | 
|  | int err, release; | 
|  | struct ubifs_budget_req req = { .dirtied_ino = 1, | 
|  | .dirtied_ino_d = ALIGN(ui->data_len, 8) }; | 
|  |  | 
|  | err = ubifs_budget_space(c, &req); | 
|  | if (err) | 
|  | return err; | 
|  |  | 
|  | mutex_lock(&ui->ui_mutex); | 
|  | inode->i_mtime = inode->i_ctime = current_time(inode); | 
|  | release = ui->dirty; | 
|  | mark_inode_dirty_sync(inode); | 
|  | mutex_unlock(&ui->ui_mutex); | 
|  | if (release) | 
|  | ubifs_release_budget(c, &req); | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static ssize_t ubifs_write_iter(struct kiocb *iocb, struct iov_iter *from) | 
|  | { | 
|  | int err = update_mctime(file_inode(iocb->ki_filp)); | 
|  | if (err) | 
|  | return err; | 
|  |  | 
|  | return generic_file_write_iter(iocb, from); | 
|  | } | 
|  |  | 
|  | static int ubifs_set_page_dirty(struct page *page) | 
|  | { | 
|  | int ret; | 
|  | struct inode *inode = page->mapping->host; | 
|  | struct ubifs_info *c = inode->i_sb->s_fs_info; | 
|  |  | 
|  | ret = __set_page_dirty_nobuffers(page); | 
|  | /* | 
|  | * An attempt to dirty a page without budgeting for it - should not | 
|  | * happen. | 
|  | */ | 
|  | ubifs_assert(c, ret == 0); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | #ifdef CONFIG_MIGRATION | 
|  | static int ubifs_migrate_page(struct address_space *mapping, | 
|  | struct page *newpage, struct page *page, enum migrate_mode mode) | 
|  | { | 
|  | int rc; | 
|  |  | 
|  | rc = migrate_page_move_mapping(mapping, newpage, page, NULL, mode, 0); | 
|  | if (rc != MIGRATEPAGE_SUCCESS) | 
|  | return rc; | 
|  |  | 
|  | if (PagePrivate(page)) { | 
|  | ClearPagePrivate(page); | 
|  | SetPagePrivate(newpage); | 
|  | } | 
|  |  | 
|  | if (mode != MIGRATE_SYNC_NO_COPY) | 
|  | migrate_page_copy(newpage, page); | 
|  | else | 
|  | migrate_page_states(newpage, page); | 
|  | return MIGRATEPAGE_SUCCESS; | 
|  | } | 
|  | #endif | 
|  |  | 
|  | static int ubifs_releasepage(struct page *page, gfp_t unused_gfp_flags) | 
|  | { | 
|  | struct inode *inode = page->mapping->host; | 
|  | struct ubifs_info *c = inode->i_sb->s_fs_info; | 
|  |  | 
|  | /* | 
|  | * An attempt to release a dirty page without budgeting for it - should | 
|  | * not happen. | 
|  | */ | 
|  | if (PageWriteback(page)) | 
|  | return 0; | 
|  | ubifs_assert(c, PagePrivate(page)); | 
|  | ubifs_assert(c, 0); | 
|  | ClearPagePrivate(page); | 
|  | ClearPageChecked(page); | 
|  | return 1; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * mmap()d file has taken write protection fault and is being made writable. | 
|  | * UBIFS must ensure page is budgeted for. | 
|  | */ | 
|  | static vm_fault_t ubifs_vm_page_mkwrite(struct vm_fault *vmf) | 
|  | { | 
|  | struct page *page = vmf->page; | 
|  | struct inode *inode = file_inode(vmf->vma->vm_file); | 
|  | struct ubifs_info *c = inode->i_sb->s_fs_info; | 
|  | struct timespec64 now = current_time(inode); | 
|  | struct ubifs_budget_req req = { .new_page = 1 }; | 
|  | int err, update_time; | 
|  |  | 
|  | dbg_gen("ino %lu, pg %lu, i_size %lld",	inode->i_ino, page->index, | 
|  | i_size_read(inode)); | 
|  | ubifs_assert(c, !c->ro_media && !c->ro_mount); | 
|  |  | 
|  | if (unlikely(c->ro_error)) | 
|  | return VM_FAULT_SIGBUS; /* -EROFS */ | 
|  |  | 
|  | /* | 
|  | * We have not locked @page so far so we may budget for changing the | 
|  | * page. Note, we cannot do this after we locked the page, because | 
|  | * budgeting may cause write-back which would cause deadlock. | 
|  | * | 
|  | * At the moment we do not know whether the page is dirty or not, so we | 
|  | * assume that it is not and budget for a new page. We could look at | 
|  | * the @PG_private flag and figure this out, but we may race with write | 
|  | * back and the page state may change by the time we lock it, so this | 
|  | * would need additional care. We do not bother with this at the | 
|  | * moment, although it might be good idea to do. Instead, we allocate | 
|  | * budget for a new page and amend it later on if the page was in fact | 
|  | * dirty. | 
|  | * | 
|  | * The budgeting-related logic of this function is similar to what we | 
|  | * do in 'ubifs_write_begin()' and 'ubifs_write_end()'. Glance there | 
|  | * for more comments. | 
|  | */ | 
|  | update_time = mctime_update_needed(inode, &now); | 
|  | if (update_time) | 
|  | /* | 
|  | * We have to change inode time stamp which requires extra | 
|  | * budgeting. | 
|  | */ | 
|  | req.dirtied_ino = 1; | 
|  |  | 
|  | err = ubifs_budget_space(c, &req); | 
|  | if (unlikely(err)) { | 
|  | if (err == -ENOSPC) | 
|  | ubifs_warn(c, "out of space for mmapped file (inode number %lu)", | 
|  | inode->i_ino); | 
|  | return VM_FAULT_SIGBUS; | 
|  | } | 
|  |  | 
|  | lock_page(page); | 
|  | if (unlikely(page->mapping != inode->i_mapping || | 
|  | page_offset(page) > i_size_read(inode))) { | 
|  | /* Page got truncated out from underneath us */ | 
|  | goto sigbus; | 
|  | } | 
|  |  | 
|  | if (PagePrivate(page)) | 
|  | release_new_page_budget(c); | 
|  | else { | 
|  | if (!PageChecked(page)) | 
|  | ubifs_convert_page_budget(c); | 
|  | SetPagePrivate(page); | 
|  | atomic_long_inc(&c->dirty_pg_cnt); | 
|  | __set_page_dirty_nobuffers(page); | 
|  | } | 
|  |  | 
|  | if (update_time) { | 
|  | int release; | 
|  | struct ubifs_inode *ui = ubifs_inode(inode); | 
|  |  | 
|  | mutex_lock(&ui->ui_mutex); | 
|  | inode->i_mtime = inode->i_ctime = current_time(inode); | 
|  | release = ui->dirty; | 
|  | mark_inode_dirty_sync(inode); | 
|  | mutex_unlock(&ui->ui_mutex); | 
|  | if (release) | 
|  | ubifs_release_dirty_inode_budget(c, ui); | 
|  | } | 
|  |  | 
|  | wait_for_stable_page(page); | 
|  | return VM_FAULT_LOCKED; | 
|  |  | 
|  | sigbus: | 
|  | unlock_page(page); | 
|  | ubifs_release_budget(c, &req); | 
|  | return VM_FAULT_SIGBUS; | 
|  | } | 
|  |  | 
|  | static const struct vm_operations_struct ubifs_file_vm_ops = { | 
|  | .fault        = filemap_fault, | 
|  | .map_pages = filemap_map_pages, | 
|  | .page_mkwrite = ubifs_vm_page_mkwrite, | 
|  | }; | 
|  |  | 
|  | static int ubifs_file_mmap(struct file *file, struct vm_area_struct *vma) | 
|  | { | 
|  | int err; | 
|  |  | 
|  | err = generic_file_mmap(file, vma); | 
|  | if (err) | 
|  | return err; | 
|  | vma->vm_ops = &ubifs_file_vm_ops; | 
|  | #ifdef CONFIG_UBIFS_ATIME_SUPPORT | 
|  | file_accessed(file); | 
|  | #endif | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static const char *ubifs_get_link(struct dentry *dentry, | 
|  | struct inode *inode, | 
|  | struct delayed_call *done) | 
|  | { | 
|  | struct ubifs_inode *ui = ubifs_inode(inode); | 
|  |  | 
|  | if (!IS_ENCRYPTED(inode)) | 
|  | return ui->data; | 
|  |  | 
|  | if (!dentry) | 
|  | return ERR_PTR(-ECHILD); | 
|  |  | 
|  | return fscrypt_get_symlink(inode, ui->data, ui->data_len, done); | 
|  | } | 
|  |  | 
|  | const struct address_space_operations ubifs_file_address_operations = { | 
|  | .readpage       = ubifs_readpage, | 
|  | .writepage      = ubifs_writepage, | 
|  | .write_begin    = ubifs_write_begin, | 
|  | .write_end      = ubifs_write_end, | 
|  | .invalidatepage = ubifs_invalidatepage, | 
|  | .set_page_dirty = ubifs_set_page_dirty, | 
|  | #ifdef CONFIG_MIGRATION | 
|  | .migratepage	= ubifs_migrate_page, | 
|  | #endif | 
|  | .releasepage    = ubifs_releasepage, | 
|  | }; | 
|  |  | 
|  | const struct inode_operations ubifs_file_inode_operations = { | 
|  | .setattr     = ubifs_setattr, | 
|  | .getattr     = ubifs_getattr, | 
|  | #ifdef CONFIG_UBIFS_FS_XATTR | 
|  | .listxattr   = ubifs_listxattr, | 
|  | #endif | 
|  | #ifdef CONFIG_UBIFS_ATIME_SUPPORT | 
|  | .update_time = ubifs_update_time, | 
|  | #endif | 
|  | }; | 
|  |  | 
|  | const struct inode_operations ubifs_symlink_inode_operations = { | 
|  | .get_link    = ubifs_get_link, | 
|  | .setattr     = ubifs_setattr, | 
|  | .getattr     = ubifs_getattr, | 
|  | #ifdef CONFIG_UBIFS_FS_XATTR | 
|  | .listxattr   = ubifs_listxattr, | 
|  | #endif | 
|  | #ifdef CONFIG_UBIFS_ATIME_SUPPORT | 
|  | .update_time = ubifs_update_time, | 
|  | #endif | 
|  | }; | 
|  |  | 
|  | const struct file_operations ubifs_file_operations = { | 
|  | .llseek         = generic_file_llseek, | 
|  | .read_iter      = generic_file_read_iter, | 
|  | .write_iter     = ubifs_write_iter, | 
|  | .mmap           = ubifs_file_mmap, | 
|  | .fsync          = ubifs_fsync, | 
|  | .unlocked_ioctl = ubifs_ioctl, | 
|  | .splice_read	= generic_file_splice_read, | 
|  | .splice_write	= iter_file_splice_write, | 
|  | .open		= fscrypt_file_open, | 
|  | #ifdef CONFIG_COMPAT | 
|  | .compat_ioctl   = ubifs_compat_ioctl, | 
|  | #endif | 
|  | }; |