|  | /* | 
|  | * rfd77402.c - Support for RF Digital RFD77402 Time-of-Flight (distance) sensor | 
|  | * | 
|  | * Copyright 2017 Peter Meerwald-Stadler <pmeerw@pmeerw.net> | 
|  | * | 
|  | * This file is subject to the terms and conditions of version 2 of | 
|  | * the GNU General Public License.  See the file COPYING in the main | 
|  | * directory of this archive for more details. | 
|  | * | 
|  | * 7-bit I2C slave address 0x4c | 
|  | * | 
|  | * TODO: interrupt | 
|  | * https://media.digikey.com/pdf/Data%20Sheets/RF%20Digital%20PDFs/RFD77402.pdf | 
|  | */ | 
|  |  | 
|  | #include <linux/module.h> | 
|  | #include <linux/i2c.h> | 
|  | #include <linux/delay.h> | 
|  |  | 
|  | #include <linux/iio/iio.h> | 
|  |  | 
|  | #define RFD77402_DRV_NAME "rfd77402" | 
|  |  | 
|  | #define RFD77402_ICSR		0x00 /* Interrupt Control Status Register */ | 
|  | #define RFD77402_ICSR_INT_MODE	BIT(2) | 
|  | #define RFD77402_ICSR_INT_POL	BIT(3) | 
|  | #define RFD77402_ICSR_RESULT	BIT(4) | 
|  | #define RFD77402_ICSR_M2H_MSG	BIT(5) | 
|  | #define RFD77402_ICSR_H2M_MSG	BIT(6) | 
|  | #define RFD77402_ICSR_RESET	BIT(7) | 
|  |  | 
|  | #define RFD77402_CMD_R		0x04 | 
|  | #define RFD77402_CMD_SINGLE	0x01 | 
|  | #define RFD77402_CMD_STANDBY	0x10 | 
|  | #define RFD77402_CMD_MCPU_OFF	0x11 | 
|  | #define RFD77402_CMD_MCPU_ON	0x12 | 
|  | #define RFD77402_CMD_RESET	BIT(6) | 
|  | #define RFD77402_CMD_VALID	BIT(7) | 
|  |  | 
|  | #define RFD77402_STATUS_R	0x06 | 
|  | #define RFD77402_STATUS_PM_MASK	GENMASK(4, 0) | 
|  | #define RFD77402_STATUS_STANDBY	0x00 | 
|  | #define RFD77402_STATUS_MCPU_OFF	0x10 | 
|  | #define RFD77402_STATUS_MCPU_ON	0x18 | 
|  |  | 
|  | #define RFD77402_RESULT_R	0x08 | 
|  | #define RFD77402_RESULT_DIST_MASK	GENMASK(12, 2) | 
|  | #define RFD77402_RESULT_ERR_MASK	GENMASK(14, 13) | 
|  | #define RFD77402_RESULT_VALID	BIT(15) | 
|  |  | 
|  | #define RFD77402_PMU_CFG	0x14 | 
|  | #define RFD77402_PMU_MCPU_INIT	BIT(9) | 
|  |  | 
|  | #define RFD77402_I2C_INIT_CFG	0x1c | 
|  | #define RFD77402_I2C_ADDR_INCR	BIT(0) | 
|  | #define RFD77402_I2C_DATA_INCR	BIT(2) | 
|  | #define RFD77402_I2C_HOST_DEBUG	BIT(5) | 
|  | #define RFD77402_I2C_MCPU_DEBUG	BIT(6) | 
|  |  | 
|  | #define RFD77402_CMD_CFGR_A	0x0c | 
|  | #define RFD77402_CMD_CFGR_B	0x0e | 
|  | #define RFD77402_HFCFG_0	0x20 | 
|  | #define RFD77402_HFCFG_1	0x22 | 
|  | #define RFD77402_HFCFG_2	0x24 | 
|  | #define RFD77402_HFCFG_3	0x26 | 
|  |  | 
|  | #define RFD77402_MOD_CHIP_ID	0x28 | 
|  |  | 
|  | /* magic configuration values from datasheet */ | 
|  | static const struct { | 
|  | u8 reg; | 
|  | u16 val; | 
|  | } rf77402_tof_config[] = { | 
|  | {RFD77402_CMD_CFGR_A,	0xe100}, | 
|  | {RFD77402_CMD_CFGR_B,	0x10ff}, | 
|  | {RFD77402_HFCFG_0,	0x07d0}, | 
|  | {RFD77402_HFCFG_1,	0x5008}, | 
|  | {RFD77402_HFCFG_2,	0xa041}, | 
|  | {RFD77402_HFCFG_3,	0x45d4}, | 
|  | }; | 
|  |  | 
|  | struct rfd77402_data { | 
|  | struct i2c_client *client; | 
|  | /* Serialize reads from the sensor */ | 
|  | struct mutex lock; | 
|  | }; | 
|  |  | 
|  | static const struct iio_chan_spec rfd77402_channels[] = { | 
|  | { | 
|  | .type = IIO_DISTANCE, | 
|  | .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | | 
|  | BIT(IIO_CHAN_INFO_SCALE), | 
|  | }, | 
|  | }; | 
|  |  | 
|  | static int rfd77402_set_state(struct rfd77402_data *data, u8 state, u16 check) | 
|  | { | 
|  | int ret; | 
|  |  | 
|  | ret = i2c_smbus_write_byte_data(data->client, RFD77402_CMD_R, | 
|  | state | RFD77402_CMD_VALID); | 
|  | if (ret < 0) | 
|  | return ret; | 
|  |  | 
|  | usleep_range(10000, 20000); | 
|  |  | 
|  | ret = i2c_smbus_read_word_data(data->client, RFD77402_STATUS_R); | 
|  | if (ret < 0) | 
|  | return ret; | 
|  | if ((ret & RFD77402_STATUS_PM_MASK) != check) | 
|  | return -ENODEV; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int rfd77402_measure(struct rfd77402_data *data) | 
|  | { | 
|  | int ret; | 
|  | int tries = 10; | 
|  |  | 
|  | ret = rfd77402_set_state(data, RFD77402_CMD_MCPU_ON, | 
|  | RFD77402_STATUS_MCPU_ON); | 
|  | if (ret < 0) | 
|  | return ret; | 
|  |  | 
|  | ret = i2c_smbus_write_byte_data(data->client, RFD77402_CMD_R, | 
|  | RFD77402_CMD_SINGLE | | 
|  | RFD77402_CMD_VALID); | 
|  | if (ret < 0) | 
|  | goto err; | 
|  |  | 
|  | while (tries-- > 0) { | 
|  | ret = i2c_smbus_read_byte_data(data->client, RFD77402_ICSR); | 
|  | if (ret < 0) | 
|  | goto err; | 
|  | if (ret & RFD77402_ICSR_RESULT) | 
|  | break; | 
|  | msleep(20); | 
|  | } | 
|  |  | 
|  | if (tries < 0) { | 
|  | ret = -ETIMEDOUT; | 
|  | goto err; | 
|  | } | 
|  |  | 
|  | ret = i2c_smbus_read_word_data(data->client, RFD77402_RESULT_R); | 
|  | if (ret < 0) | 
|  | goto err; | 
|  |  | 
|  | if ((ret & RFD77402_RESULT_ERR_MASK) || | 
|  | !(ret & RFD77402_RESULT_VALID)) { | 
|  | ret = -EIO; | 
|  | goto err; | 
|  | } | 
|  |  | 
|  | return (ret & RFD77402_RESULT_DIST_MASK) >> 2; | 
|  |  | 
|  | err: | 
|  | rfd77402_set_state(data, RFD77402_CMD_MCPU_OFF, | 
|  | RFD77402_STATUS_MCPU_OFF); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int rfd77402_read_raw(struct iio_dev *indio_dev, | 
|  | struct iio_chan_spec const *chan, | 
|  | int *val, int *val2, long mask) | 
|  | { | 
|  | struct rfd77402_data *data = iio_priv(indio_dev); | 
|  | int ret; | 
|  |  | 
|  | switch (mask) { | 
|  | case IIO_CHAN_INFO_RAW: | 
|  | mutex_lock(&data->lock); | 
|  | ret = rfd77402_measure(data); | 
|  | mutex_unlock(&data->lock); | 
|  | if (ret < 0) | 
|  | return ret; | 
|  | *val = ret; | 
|  | return IIO_VAL_INT; | 
|  | case IIO_CHAN_INFO_SCALE: | 
|  | /* 1 LSB is 1 mm */ | 
|  | *val = 0; | 
|  | *val2 = 1000; | 
|  | return IIO_VAL_INT_PLUS_MICRO; | 
|  | default: | 
|  | return -EINVAL; | 
|  | } | 
|  | } | 
|  |  | 
|  | static const struct iio_info rfd77402_info = { | 
|  | .read_raw = rfd77402_read_raw, | 
|  | }; | 
|  |  | 
|  | static int rfd77402_init(struct rfd77402_data *data) | 
|  | { | 
|  | int ret, i; | 
|  |  | 
|  | ret = rfd77402_set_state(data, RFD77402_CMD_STANDBY, | 
|  | RFD77402_STATUS_STANDBY); | 
|  | if (ret < 0) | 
|  | return ret; | 
|  |  | 
|  | /* configure INT pad as push-pull, active low */ | 
|  | ret = i2c_smbus_write_byte_data(data->client, RFD77402_ICSR, | 
|  | RFD77402_ICSR_INT_MODE); | 
|  | if (ret < 0) | 
|  | return ret; | 
|  |  | 
|  | /* I2C configuration */ | 
|  | ret = i2c_smbus_write_word_data(data->client, RFD77402_I2C_INIT_CFG, | 
|  | RFD77402_I2C_ADDR_INCR | | 
|  | RFD77402_I2C_DATA_INCR | | 
|  | RFD77402_I2C_HOST_DEBUG	| | 
|  | RFD77402_I2C_MCPU_DEBUG); | 
|  | if (ret < 0) | 
|  | return ret; | 
|  |  | 
|  | /* set initialization */ | 
|  | ret = i2c_smbus_write_word_data(data->client, RFD77402_PMU_CFG, 0x0500); | 
|  | if (ret < 0) | 
|  | return ret; | 
|  |  | 
|  | ret = rfd77402_set_state(data, RFD77402_CMD_MCPU_OFF, | 
|  | RFD77402_STATUS_MCPU_OFF); | 
|  | if (ret < 0) | 
|  | return ret; | 
|  |  | 
|  | /* set initialization */ | 
|  | ret = i2c_smbus_write_word_data(data->client, RFD77402_PMU_CFG, 0x0600); | 
|  | if (ret < 0) | 
|  | return ret; | 
|  |  | 
|  | ret = rfd77402_set_state(data, RFD77402_CMD_MCPU_ON, | 
|  | RFD77402_STATUS_MCPU_ON); | 
|  | if (ret < 0) | 
|  | return ret; | 
|  |  | 
|  | for (i = 0; i < ARRAY_SIZE(rf77402_tof_config); i++) { | 
|  | ret = i2c_smbus_write_word_data(data->client, | 
|  | rf77402_tof_config[i].reg, | 
|  | rf77402_tof_config[i].val); | 
|  | if (ret < 0) | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | ret = rfd77402_set_state(data, RFD77402_CMD_STANDBY, | 
|  | RFD77402_STATUS_STANDBY); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int rfd77402_powerdown(struct rfd77402_data *data) | 
|  | { | 
|  | return rfd77402_set_state(data, RFD77402_CMD_STANDBY, | 
|  | RFD77402_STATUS_STANDBY); | 
|  | } | 
|  |  | 
|  | static int rfd77402_probe(struct i2c_client *client, | 
|  | const struct i2c_device_id *id) | 
|  | { | 
|  | struct rfd77402_data *data; | 
|  | struct iio_dev *indio_dev; | 
|  | int ret; | 
|  |  | 
|  | ret = i2c_smbus_read_word_data(client, RFD77402_MOD_CHIP_ID); | 
|  | if (ret < 0) | 
|  | return ret; | 
|  | if (ret != 0xad01 && ret != 0xad02) /* known chip ids */ | 
|  | return -ENODEV; | 
|  |  | 
|  | indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data)); | 
|  | if (!indio_dev) | 
|  | return -ENOMEM; | 
|  |  | 
|  | data = iio_priv(indio_dev); | 
|  | i2c_set_clientdata(client, indio_dev); | 
|  | data->client = client; | 
|  | mutex_init(&data->lock); | 
|  |  | 
|  | indio_dev->dev.parent = &client->dev; | 
|  | indio_dev->info = &rfd77402_info; | 
|  | indio_dev->channels = rfd77402_channels; | 
|  | indio_dev->num_channels = ARRAY_SIZE(rfd77402_channels); | 
|  | indio_dev->name = RFD77402_DRV_NAME; | 
|  | indio_dev->modes = INDIO_DIRECT_MODE; | 
|  |  | 
|  | ret = rfd77402_init(data); | 
|  | if (ret < 0) | 
|  | return ret; | 
|  |  | 
|  | ret = iio_device_register(indio_dev); | 
|  | if (ret) | 
|  | goto err_powerdown; | 
|  |  | 
|  | return 0; | 
|  |  | 
|  | err_powerdown: | 
|  | rfd77402_powerdown(data); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int rfd77402_remove(struct i2c_client *client) | 
|  | { | 
|  | struct iio_dev *indio_dev = i2c_get_clientdata(client); | 
|  |  | 
|  | iio_device_unregister(indio_dev); | 
|  | rfd77402_powerdown(iio_priv(indio_dev)); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | #ifdef CONFIG_PM_SLEEP | 
|  | static int rfd77402_suspend(struct device *dev) | 
|  | { | 
|  | struct rfd77402_data *data = iio_priv(i2c_get_clientdata( | 
|  | to_i2c_client(dev))); | 
|  |  | 
|  | return rfd77402_powerdown(data); | 
|  | } | 
|  |  | 
|  | static int rfd77402_resume(struct device *dev) | 
|  | { | 
|  | struct rfd77402_data *data = iio_priv(i2c_get_clientdata( | 
|  | to_i2c_client(dev))); | 
|  |  | 
|  | return rfd77402_init(data); | 
|  | } | 
|  | #endif | 
|  |  | 
|  | static SIMPLE_DEV_PM_OPS(rfd77402_pm_ops, rfd77402_suspend, rfd77402_resume); | 
|  |  | 
|  | static const struct i2c_device_id rfd77402_id[] = { | 
|  | { "rfd77402", 0}, | 
|  | { } | 
|  | }; | 
|  | MODULE_DEVICE_TABLE(i2c, rfd77402_id); | 
|  |  | 
|  | static struct i2c_driver rfd77402_driver = { | 
|  | .driver = { | 
|  | .name   = RFD77402_DRV_NAME, | 
|  | .pm     = &rfd77402_pm_ops, | 
|  | }, | 
|  | .probe  = rfd77402_probe, | 
|  | .remove = rfd77402_remove, | 
|  | .id_table = rfd77402_id, | 
|  | }; | 
|  |  | 
|  | module_i2c_driver(rfd77402_driver); | 
|  |  | 
|  | MODULE_AUTHOR("Peter Meerwald-Stadler <pmeerw@pmeerw.net>"); | 
|  | MODULE_DESCRIPTION("RFD77402 Time-of-Flight sensor driver"); | 
|  | MODULE_LICENSE("GPL"); |