|  | // SPDX-License-Identifier: GPL-2.0-or-later | 
|  | /* | 
|  | * Linux/PA-RISC Project (http://www.parisc-linux.org/) | 
|  | * | 
|  | * Floating-point emulation code | 
|  | *  Copyright (C) 2001 Hewlett-Packard (Paul Bame) <bame@debian.org> | 
|  | */ | 
|  | /* | 
|  | * BEGIN_DESC | 
|  | * | 
|  | *  File: | 
|  | *	@(#)	pa/spmath/dfcmp.c		$Revision: 1.1 $ | 
|  | * | 
|  | *  Purpose: | 
|  | *	dbl_cmp: compare two values | 
|  | * | 
|  | *  External Interfaces: | 
|  | *	dbl_fcmp(leftptr, rightptr, cond, status) | 
|  | * | 
|  | *  Internal Interfaces: | 
|  | * | 
|  | *  Theory: | 
|  | *	<<please update with a overview of the operation of this file>> | 
|  | * | 
|  | * END_DESC | 
|  | */ | 
|  |  | 
|  |  | 
|  |  | 
|  | #include "float.h" | 
|  | #include "dbl_float.h" | 
|  |  | 
|  | /* | 
|  | * dbl_cmp: compare two values | 
|  | */ | 
|  | int | 
|  | dbl_fcmp (dbl_floating_point * leftptr, dbl_floating_point * rightptr, | 
|  | unsigned int cond, unsigned int *status) | 
|  |  | 
|  | /* The predicate to be tested */ | 
|  |  | 
|  | { | 
|  | register unsigned int leftp1, leftp2, rightp1, rightp2; | 
|  | register int xorresult; | 
|  |  | 
|  | /* Create local copies of the numbers */ | 
|  | Dbl_copyfromptr(leftptr,leftp1,leftp2); | 
|  | Dbl_copyfromptr(rightptr,rightp1,rightp2); | 
|  | /* | 
|  | * Test for NaN | 
|  | */ | 
|  | if(    (Dbl_exponent(leftp1) == DBL_INFINITY_EXPONENT) | 
|  | || (Dbl_exponent(rightp1) == DBL_INFINITY_EXPONENT) ) | 
|  | { | 
|  | /* Check if a NaN is involved.  Signal an invalid exception when | 
|  | * comparing a signaling NaN or when comparing quiet NaNs and the | 
|  | * low bit of the condition is set */ | 
|  | if( ((Dbl_exponent(leftp1) == DBL_INFINITY_EXPONENT) | 
|  | && Dbl_isnotzero_mantissa(leftp1,leftp2) | 
|  | && (Exception(cond) || Dbl_isone_signaling(leftp1))) | 
|  | || | 
|  | ((Dbl_exponent(rightp1) == DBL_INFINITY_EXPONENT) | 
|  | && Dbl_isnotzero_mantissa(rightp1,rightp2) | 
|  | && (Exception(cond) || Dbl_isone_signaling(rightp1))) ) | 
|  | { | 
|  | if( Is_invalidtrap_enabled() ) { | 
|  | Set_status_cbit(Unordered(cond)); | 
|  | return(INVALIDEXCEPTION); | 
|  | } | 
|  | else Set_invalidflag(); | 
|  | Set_status_cbit(Unordered(cond)); | 
|  | return(NOEXCEPTION); | 
|  | } | 
|  | /* All the exceptional conditions are handled, now special case | 
|  | NaN compares */ | 
|  | else if( ((Dbl_exponent(leftp1) == DBL_INFINITY_EXPONENT) | 
|  | && Dbl_isnotzero_mantissa(leftp1,leftp2)) | 
|  | || | 
|  | ((Dbl_exponent(rightp1) == DBL_INFINITY_EXPONENT) | 
|  | && Dbl_isnotzero_mantissa(rightp1,rightp2)) ) | 
|  | { | 
|  | /* NaNs always compare unordered. */ | 
|  | Set_status_cbit(Unordered(cond)); | 
|  | return(NOEXCEPTION); | 
|  | } | 
|  | /* infinities will drop down to the normal compare mechanisms */ | 
|  | } | 
|  | /* First compare for unequal signs => less or greater or | 
|  | * special equal case */ | 
|  | Dbl_xortointp1(leftp1,rightp1,xorresult); | 
|  | if( xorresult < 0 ) | 
|  | { | 
|  | /* left negative => less, left positive => greater. | 
|  | * equal is possible if both operands are zeros. */ | 
|  | if( Dbl_iszero_exponentmantissa(leftp1,leftp2) | 
|  | && Dbl_iszero_exponentmantissa(rightp1,rightp2) ) | 
|  | { | 
|  | Set_status_cbit(Equal(cond)); | 
|  | } | 
|  | else if( Dbl_isone_sign(leftp1) ) | 
|  | { | 
|  | Set_status_cbit(Lessthan(cond)); | 
|  | } | 
|  | else | 
|  | { | 
|  | Set_status_cbit(Greaterthan(cond)); | 
|  | } | 
|  | } | 
|  | /* Signs are the same.  Treat negative numbers separately | 
|  | * from the positives because of the reversed sense.  */ | 
|  | else if(Dbl_isequal(leftp1,leftp2,rightp1,rightp2)) | 
|  | { | 
|  | Set_status_cbit(Equal(cond)); | 
|  | } | 
|  | else if( Dbl_iszero_sign(leftp1) ) | 
|  | { | 
|  | /* Positive compare */ | 
|  | if( Dbl_allp1(leftp1) < Dbl_allp1(rightp1) ) | 
|  | { | 
|  | Set_status_cbit(Lessthan(cond)); | 
|  | } | 
|  | else if( Dbl_allp1(leftp1) > Dbl_allp1(rightp1) ) | 
|  | { | 
|  | Set_status_cbit(Greaterthan(cond)); | 
|  | } | 
|  | else | 
|  | { | 
|  | /* Equal first parts.  Now we must use unsigned compares to | 
|  | * resolve the two possibilities. */ | 
|  | if( Dbl_allp2(leftp2) < Dbl_allp2(rightp2) ) | 
|  | { | 
|  | Set_status_cbit(Lessthan(cond)); | 
|  | } | 
|  | else | 
|  | { | 
|  | Set_status_cbit(Greaterthan(cond)); | 
|  | } | 
|  | } | 
|  | } | 
|  | else | 
|  | { | 
|  | /* Negative compare.  Signed or unsigned compares | 
|  | * both work the same.  That distinction is only | 
|  | * important when the sign bits differ. */ | 
|  | if( Dbl_allp1(leftp1) > Dbl_allp1(rightp1) ) | 
|  | { | 
|  | Set_status_cbit(Lessthan(cond)); | 
|  | } | 
|  | else if( Dbl_allp1(leftp1) < Dbl_allp1(rightp1) ) | 
|  | { | 
|  | Set_status_cbit(Greaterthan(cond)); | 
|  | } | 
|  | else | 
|  | { | 
|  | /* Equal first parts.  Now we must use unsigned compares to | 
|  | * resolve the two possibilities. */ | 
|  | if( Dbl_allp2(leftp2) > Dbl_allp2(rightp2) ) | 
|  | { | 
|  | Set_status_cbit(Lessthan(cond)); | 
|  | } | 
|  | else | 
|  | { | 
|  | Set_status_cbit(Greaterthan(cond)); | 
|  | } | 
|  | } | 
|  | } | 
|  | return(NOEXCEPTION); | 
|  | } |