| /* | |
| * ds.h -- 16-bit PCMCIA core support | |
| * | |
| * This program is free software; you can redistribute it and/or modify | |
| * it under the terms of the GNU General Public License version 2 as | |
| * published by the Free Software Foundation. | |
| * | |
| * The initial developer of the original code is David A. Hinds | |
| * <dahinds@users.sourceforge.net>. Portions created by David A. Hinds | |
| * are Copyright (C) 1999 David A. Hinds. All Rights Reserved. | |
| * | |
| * (C) 1999 David A. Hinds | |
| * (C) 2003 - 2008 Dominik Brodowski | |
| */ | |
| #ifndef _LINUX_DS_H | |
| #define _LINUX_DS_H | |
| #ifdef __KERNEL__ | |
| #include <linux/mod_devicetable.h> | |
| #endif | |
| #include <pcmcia/device_id.h> | |
| #ifdef __KERNEL__ | |
| #include <linux/device.h> | |
| #include <linux/interrupt.h> | |
| #include <pcmcia/ss.h> | |
| #include <linux/atomic.h> | |
| /* | |
| * PCMCIA device drivers (16-bit cards only; 32-bit cards require CardBus | |
| * a.k.a. PCI drivers | |
| */ | |
| struct pcmcia_socket; | |
| struct pcmcia_device; | |
| struct config_t; | |
| struct net_device; | |
| /* dynamic device IDs for PCMCIA device drivers. See | |
| * Documentation/pcmcia/driver.txt for details. | |
| */ | |
| struct pcmcia_dynids { | |
| struct mutex lock; | |
| struct list_head list; | |
| }; | |
| struct pcmcia_driver { | |
| const char *name; | |
| int (*probe) (struct pcmcia_device *dev); | |
| void (*remove) (struct pcmcia_device *dev); | |
| int (*suspend) (struct pcmcia_device *dev); | |
| int (*resume) (struct pcmcia_device *dev); | |
| struct module *owner; | |
| const struct pcmcia_device_id *id_table; | |
| struct device_driver drv; | |
| struct pcmcia_dynids dynids; | |
| }; | |
| /* driver registration */ | |
| int pcmcia_register_driver(struct pcmcia_driver *driver); | |
| void pcmcia_unregister_driver(struct pcmcia_driver *driver); | |
| /** | |
| * module_pcmcia_driver() - Helper macro for registering a pcmcia driver | |
| * @__pcmcia_driver: pcmcia_driver struct | |
| * | |
| * Helper macro for pcmcia drivers which do not do anything special in module | |
| * init/exit. This eliminates a lot of boilerplate. Each module may only use | |
| * this macro once, and calling it replaces module_init() and module_exit(). | |
| */ | |
| #define module_pcmcia_driver(__pcmcia_driver) \ | |
| module_driver(__pcmcia_driver, pcmcia_register_driver, \ | |
| pcmcia_unregister_driver) | |
| /* for struct resource * array embedded in struct pcmcia_device */ | |
| enum { | |
| PCMCIA_IOPORT_0, | |
| PCMCIA_IOPORT_1, | |
| PCMCIA_IOMEM_0, | |
| PCMCIA_IOMEM_1, | |
| PCMCIA_IOMEM_2, | |
| PCMCIA_IOMEM_3, | |
| PCMCIA_NUM_RESOURCES, | |
| }; | |
| struct pcmcia_device { | |
| /* the socket and the device_no [for multifunction devices] | |
| uniquely define a pcmcia_device */ | |
| struct pcmcia_socket *socket; | |
| char *devname; | |
| u8 device_no; | |
| /* the hardware "function" device; certain subdevices can | |
| * share one hardware "function" device. */ | |
| u8 func; | |
| struct config_t *function_config; | |
| struct list_head socket_device_list; | |
| /* device setup */ | |
| unsigned int irq; | |
| struct resource *resource[PCMCIA_NUM_RESOURCES]; | |
| resource_size_t card_addr; /* for the 1st IOMEM resource */ | |
| unsigned int vpp; | |
| unsigned int config_flags; /* CONF_ENABLE_ flags below */ | |
| unsigned int config_base; | |
| unsigned int config_index; | |
| unsigned int config_regs; /* PRESENT_ flags below */ | |
| unsigned int io_lines; /* number of I/O lines */ | |
| /* Is the device suspended? */ | |
| u16 suspended:1; | |
| /* Flags whether io, irq, win configurations were | |
| * requested, and whether the configuration is "locked" */ | |
| u16 _irq:1; | |
| u16 _io:1; | |
| u16 _win:4; | |
| u16 _locked:1; | |
| /* Flag whether a "fuzzy" func_id based match is | |
| * allowed. */ | |
| u16 allow_func_id_match:1; | |
| /* information about this device */ | |
| u16 has_manf_id:1; | |
| u16 has_card_id:1; | |
| u16 has_func_id:1; | |
| u16 reserved:4; | |
| u8 func_id; | |
| u16 manf_id; | |
| u16 card_id; | |
| char *prod_id[4]; | |
| u64 dma_mask; | |
| struct device dev; | |
| /* data private to drivers */ | |
| void *priv; | |
| unsigned int open; | |
| }; | |
| #define to_pcmcia_dev(n) container_of(n, struct pcmcia_device, dev) | |
| #define to_pcmcia_drv(n) container_of(n, struct pcmcia_driver, drv) | |
| /* | |
| * CIS access. | |
| * | |
| * Please use the following functions to access CIS tuples: | |
| * - pcmcia_get_tuple() | |
| * - pcmcia_loop_tuple() | |
| * - pcmcia_get_mac_from_cis() | |
| * | |
| * To parse a tuple_t, pcmcia_parse_tuple() exists. Its interface | |
| * might change in future. | |
| */ | |
| /* get the very first CIS entry of type @code. Note that buf is pointer | |
| * to u8 *buf; and that you need to kfree(buf) afterwards. */ | |
| size_t pcmcia_get_tuple(struct pcmcia_device *p_dev, cisdata_t code, | |
| u8 **buf); | |
| /* loop over CIS entries */ | |
| int pcmcia_loop_tuple(struct pcmcia_device *p_dev, cisdata_t code, | |
| int (*loop_tuple) (struct pcmcia_device *p_dev, | |
| tuple_t *tuple, | |
| void *priv_data), | |
| void *priv_data); | |
| /* get the MAC address from CISTPL_FUNCE */ | |
| int pcmcia_get_mac_from_cis(struct pcmcia_device *p_dev, | |
| struct net_device *dev); | |
| /* parse a tuple_t */ | |
| int pcmcia_parse_tuple(tuple_t *tuple, cisparse_t *parse); | |
| /* loop CIS entries for valid configuration */ | |
| int pcmcia_loop_config(struct pcmcia_device *p_dev, | |
| int (*conf_check) (struct pcmcia_device *p_dev, | |
| void *priv_data), | |
| void *priv_data); | |
| /* is the device still there? */ | |
| struct pcmcia_device *pcmcia_dev_present(struct pcmcia_device *p_dev); | |
| /* low-level interface reset */ | |
| int pcmcia_reset_card(struct pcmcia_socket *skt); | |
| /* CIS config */ | |
| int pcmcia_read_config_byte(struct pcmcia_device *p_dev, off_t where, u8 *val); | |
| int pcmcia_write_config_byte(struct pcmcia_device *p_dev, off_t where, u8 val); | |
| /* device configuration */ | |
| int pcmcia_request_io(struct pcmcia_device *p_dev); | |
| int __must_check | |
| __pcmcia_request_exclusive_irq(struct pcmcia_device *p_dev, | |
| irq_handler_t handler); | |
| static inline __must_check __deprecated int | |
| pcmcia_request_exclusive_irq(struct pcmcia_device *p_dev, | |
| irq_handler_t handler) | |
| { | |
| return __pcmcia_request_exclusive_irq(p_dev, handler); | |
| } | |
| int __must_check pcmcia_request_irq(struct pcmcia_device *p_dev, | |
| irq_handler_t handler); | |
| int pcmcia_enable_device(struct pcmcia_device *p_dev); | |
| int pcmcia_request_window(struct pcmcia_device *p_dev, struct resource *res, | |
| unsigned int speed); | |
| int pcmcia_release_window(struct pcmcia_device *p_dev, struct resource *res); | |
| int pcmcia_map_mem_page(struct pcmcia_device *p_dev, struct resource *res, | |
| unsigned int offset); | |
| int pcmcia_fixup_vpp(struct pcmcia_device *p_dev, unsigned char new_vpp); | |
| int pcmcia_fixup_iowidth(struct pcmcia_device *p_dev); | |
| void pcmcia_disable_device(struct pcmcia_device *p_dev); | |
| /* IO ports */ | |
| #define IO_DATA_PATH_WIDTH 0x18 | |
| #define IO_DATA_PATH_WIDTH_8 0x00 | |
| #define IO_DATA_PATH_WIDTH_16 0x08 | |
| #define IO_DATA_PATH_WIDTH_AUTO 0x10 | |
| /* IO memory */ | |
| #define WIN_MEMORY_TYPE_CM 0x00 /* default */ | |
| #define WIN_MEMORY_TYPE_AM 0x20 /* MAP_ATTRIB */ | |
| #define WIN_DATA_WIDTH_8 0x00 /* default */ | |
| #define WIN_DATA_WIDTH_16 0x02 /* MAP_16BIT */ | |
| #define WIN_ENABLE 0x01 /* MAP_ACTIVE */ | |
| #define WIN_USE_WAIT 0x40 /* MAP_USE_WAIT */ | |
| #define WIN_FLAGS_MAP 0x63 /* MAP_ATTRIB | MAP_16BIT | MAP_ACTIVE | | |
| MAP_USE_WAIT */ | |
| #define WIN_FLAGS_REQ 0x1c /* mapping to socket->win[i]: | |
| 0x04 -> 0 | |
| 0x08 -> 1 | |
| 0x0c -> 2 | |
| 0x10 -> 3 */ | |
| /* config_reg{ister}s present for this PCMCIA device */ | |
| #define PRESENT_OPTION 0x001 | |
| #define PRESENT_STATUS 0x002 | |
| #define PRESENT_PIN_REPLACE 0x004 | |
| #define PRESENT_COPY 0x008 | |
| #define PRESENT_EXT_STATUS 0x010 | |
| #define PRESENT_IOBASE_0 0x020 | |
| #define PRESENT_IOBASE_1 0x040 | |
| #define PRESENT_IOBASE_2 0x080 | |
| #define PRESENT_IOBASE_3 0x100 | |
| #define PRESENT_IOSIZE 0x200 | |
| /* flags to be passed to pcmcia_enable_device() */ | |
| #define CONF_ENABLE_IRQ 0x0001 | |
| #define CONF_ENABLE_SPKR 0x0002 | |
| #define CONF_ENABLE_PULSE_IRQ 0x0004 | |
| #define CONF_ENABLE_ESR 0x0008 | |
| #define CONF_ENABLE_IOCARD 0x0010 /* auto-enabled if IO resources or IRQ | |
| * (CONF_ENABLE_IRQ) in use */ | |
| #define CONF_ENABLE_ZVCARD 0x0020 | |
| /* flags used by pcmcia_loop_config() autoconfiguration */ | |
| #define CONF_AUTO_CHECK_VCC 0x0100 /* check for matching Vcc? */ | |
| #define CONF_AUTO_SET_VPP 0x0200 /* set Vpp? */ | |
| #define CONF_AUTO_AUDIO 0x0400 /* enable audio line? */ | |
| #define CONF_AUTO_SET_IO 0x0800 /* set ->resource[0,1] */ | |
| #define CONF_AUTO_SET_IOMEM 0x1000 /* set ->resource[2] */ | |
| #endif /* __KERNEL__ */ | |
| #endif /* _LINUX_DS_H */ |