| // SPDX-License-Identifier: GPL-2.0 | |
| /* | |
| * R-Car Gen3 Clock Pulse Generator | |
| * | |
| * Copyright (C) 2015-2018 Glider bvba | |
| * Copyright (C) 2019 Renesas Electronics Corp. | |
| * | |
| * Based on clk-rcar-gen3.c | |
| * | |
| * Copyright (C) 2015 Renesas Electronics Corp. | |
| */ | |
| #include <linux/bug.h> | |
| #include <linux/bitfield.h> | |
| #include <linux/clk.h> | |
| #include <linux/clk-provider.h> | |
| #include <linux/device.h> | |
| #include <linux/err.h> | |
| #include <linux/init.h> | |
| #include <linux/io.h> | |
| #include <linux/pm.h> | |
| #include <linux/slab.h> | |
| #include <linux/sys_soc.h> | |
| #include "renesas-cpg-mssr.h" | |
| #include "rcar-gen3-cpg.h" | |
| #define CPG_PLL0CR 0x00d8 | |
| #define CPG_PLL2CR 0x002c | |
| #define CPG_PLL4CR 0x01f4 | |
| #define CPG_RCKCR_CKSEL BIT(15) /* RCLK Clock Source Select */ | |
| static spinlock_t cpg_lock; | |
| static void cpg_reg_modify(void __iomem *reg, u32 clear, u32 set) | |
| { | |
| unsigned long flags; | |
| u32 val; | |
| spin_lock_irqsave(&cpg_lock, flags); | |
| val = readl(reg); | |
| val &= ~clear; | |
| val |= set; | |
| writel(val, reg); | |
| spin_unlock_irqrestore(&cpg_lock, flags); | |
| }; | |
| struct cpg_simple_notifier { | |
| struct notifier_block nb; | |
| void __iomem *reg; | |
| u32 saved; | |
| }; | |
| static int cpg_simple_notifier_call(struct notifier_block *nb, | |
| unsigned long action, void *data) | |
| { | |
| struct cpg_simple_notifier *csn = | |
| container_of(nb, struct cpg_simple_notifier, nb); | |
| switch (action) { | |
| case PM_EVENT_SUSPEND: | |
| csn->saved = readl(csn->reg); | |
| return NOTIFY_OK; | |
| case PM_EVENT_RESUME: | |
| writel(csn->saved, csn->reg); | |
| return NOTIFY_OK; | |
| } | |
| return NOTIFY_DONE; | |
| } | |
| static void cpg_simple_notifier_register(struct raw_notifier_head *notifiers, | |
| struct cpg_simple_notifier *csn) | |
| { | |
| csn->nb.notifier_call = cpg_simple_notifier_call; | |
| raw_notifier_chain_register(notifiers, &csn->nb); | |
| } | |
| /* | |
| * Z Clock & Z2 Clock | |
| * | |
| * Traits of this clock: | |
| * prepare - clk_prepare only ensures that parents are prepared | |
| * enable - clk_enable only ensures that parents are enabled | |
| * rate - rate is adjustable. clk->rate = (parent->rate * mult / 32 ) / 2 | |
| * parent - fixed parent. No clk_set_parent support | |
| */ | |
| #define CPG_FRQCRB 0x00000004 | |
| #define CPG_FRQCRB_KICK BIT(31) | |
| #define CPG_FRQCRC 0x000000e0 | |
| struct cpg_z_clk { | |
| struct clk_hw hw; | |
| void __iomem *reg; | |
| void __iomem *kick_reg; | |
| unsigned long mask; | |
| unsigned int fixed_div; | |
| }; | |
| #define to_z_clk(_hw) container_of(_hw, struct cpg_z_clk, hw) | |
| static unsigned long cpg_z_clk_recalc_rate(struct clk_hw *hw, | |
| unsigned long parent_rate) | |
| { | |
| struct cpg_z_clk *zclk = to_z_clk(hw); | |
| unsigned int mult; | |
| u32 val; | |
| val = readl(zclk->reg) & zclk->mask; | |
| mult = 32 - (val >> __ffs(zclk->mask)); | |
| return DIV_ROUND_CLOSEST_ULL((u64)parent_rate * mult, | |
| 32 * zclk->fixed_div); | |
| } | |
| static int cpg_z_clk_determine_rate(struct clk_hw *hw, | |
| struct clk_rate_request *req) | |
| { | |
| struct cpg_z_clk *zclk = to_z_clk(hw); | |
| unsigned int min_mult, max_mult, mult; | |
| unsigned long prate; | |
| prate = req->best_parent_rate / zclk->fixed_div; | |
| min_mult = max(div64_ul(req->min_rate * 32ULL, prate), 1ULL); | |
| max_mult = min(div64_ul(req->max_rate * 32ULL, prate), 32ULL); | |
| if (max_mult < min_mult) | |
| return -EINVAL; | |
| mult = div64_ul(req->rate * 32ULL, prate); | |
| mult = clamp(mult, min_mult, max_mult); | |
| req->rate = div_u64((u64)prate * mult, 32); | |
| return 0; | |
| } | |
| static int cpg_z_clk_set_rate(struct clk_hw *hw, unsigned long rate, | |
| unsigned long parent_rate) | |
| { | |
| struct cpg_z_clk *zclk = to_z_clk(hw); | |
| unsigned int mult; | |
| unsigned int i; | |
| mult = DIV64_U64_ROUND_CLOSEST(rate * 32ULL * zclk->fixed_div, | |
| parent_rate); | |
| mult = clamp(mult, 1U, 32U); | |
| if (readl(zclk->kick_reg) & CPG_FRQCRB_KICK) | |
| return -EBUSY; | |
| cpg_reg_modify(zclk->reg, zclk->mask, | |
| ((32 - mult) << __ffs(zclk->mask)) & zclk->mask); | |
| /* | |
| * Set KICK bit in FRQCRB to update hardware setting and wait for | |
| * clock change completion. | |
| */ | |
| cpg_reg_modify(zclk->kick_reg, 0, CPG_FRQCRB_KICK); | |
| /* | |
| * Note: There is no HW information about the worst case latency. | |
| * | |
| * Using experimental measurements, it seems that no more than | |
| * ~10 iterations are needed, independently of the CPU rate. | |
| * Since this value might be dependent of external xtal rate, pll1 | |
| * rate or even the other emulation clocks rate, use 1000 as a | |
| * "super" safe value. | |
| */ | |
| for (i = 1000; i; i--) { | |
| if (!(readl(zclk->kick_reg) & CPG_FRQCRB_KICK)) | |
| return 0; | |
| cpu_relax(); | |
| } | |
| return -ETIMEDOUT; | |
| } | |
| static const struct clk_ops cpg_z_clk_ops = { | |
| .recalc_rate = cpg_z_clk_recalc_rate, | |
| .determine_rate = cpg_z_clk_determine_rate, | |
| .set_rate = cpg_z_clk_set_rate, | |
| }; | |
| static struct clk * __init cpg_z_clk_register(const char *name, | |
| const char *parent_name, | |
| void __iomem *reg, | |
| unsigned int div, | |
| unsigned int offset) | |
| { | |
| struct clk_init_data init; | |
| struct cpg_z_clk *zclk; | |
| struct clk *clk; | |
| zclk = kzalloc(sizeof(*zclk), GFP_KERNEL); | |
| if (!zclk) | |
| return ERR_PTR(-ENOMEM); | |
| init.name = name; | |
| init.ops = &cpg_z_clk_ops; | |
| init.flags = 0; | |
| init.parent_names = &parent_name; | |
| init.num_parents = 1; | |
| zclk->reg = reg + CPG_FRQCRC; | |
| zclk->kick_reg = reg + CPG_FRQCRB; | |
| zclk->hw.init = &init; | |
| zclk->mask = GENMASK(offset + 4, offset); | |
| zclk->fixed_div = div; /* PLLVCO x 1/div x SYS-CPU divider */ | |
| clk = clk_register(NULL, &zclk->hw); | |
| if (IS_ERR(clk)) | |
| kfree(zclk); | |
| return clk; | |
| } | |
| /* | |
| * SDn Clock | |
| */ | |
| #define CPG_SD_STP_HCK BIT(9) | |
| #define CPG_SD_STP_CK BIT(8) | |
| #define CPG_SD_STP_MASK (CPG_SD_STP_HCK | CPG_SD_STP_CK) | |
| #define CPG_SD_FC_MASK (0x7 << 2 | 0x3 << 0) | |
| #define CPG_SD_DIV_TABLE_DATA(stp_hck, stp_ck, sd_srcfc, sd_fc, sd_div) \ | |
| { \ | |
| .val = ((stp_hck) ? CPG_SD_STP_HCK : 0) | \ | |
| ((stp_ck) ? CPG_SD_STP_CK : 0) | \ | |
| ((sd_srcfc) << 2) | \ | |
| ((sd_fc) << 0), \ | |
| .div = (sd_div), \ | |
| } | |
| struct sd_div_table { | |
| u32 val; | |
| unsigned int div; | |
| }; | |
| struct sd_clock { | |
| struct clk_hw hw; | |
| const struct sd_div_table *div_table; | |
| struct cpg_simple_notifier csn; | |
| unsigned int div_num; | |
| unsigned int cur_div_idx; | |
| }; | |
| /* SDn divider | |
| * sd_srcfc sd_fc div | |
| * stp_hck stp_ck (div) (div) = sd_srcfc x sd_fc | |
| *------------------------------------------------------------------- | |
| * 0 0 0 (1) 1 (4) 4 : SDR104 / HS200 / HS400 (8 TAP) | |
| * 0 0 1 (2) 1 (4) 8 : SDR50 | |
| * 1 0 2 (4) 1 (4) 16 : HS / SDR25 | |
| * 1 0 3 (8) 1 (4) 32 : NS / SDR12 | |
| * 1 0 4 (16) 1 (4) 64 | |
| * 0 0 0 (1) 0 (2) 2 | |
| * 0 0 1 (2) 0 (2) 4 : SDR104 / HS200 / HS400 (4 TAP) | |
| * 1 0 2 (4) 0 (2) 8 | |
| * 1 0 3 (8) 0 (2) 16 | |
| * 1 0 4 (16) 0 (2) 32 | |
| * | |
| * NOTE: There is a quirk option to ignore the first row of the dividers | |
| * table when searching for suitable settings. This is because HS400 on | |
| * early ES versions of H3 and M3-W requires a specific setting to work. | |
| */ | |
| static const struct sd_div_table cpg_sd_div_table[] = { | |
| /* CPG_SD_DIV_TABLE_DATA(stp_hck, stp_ck, sd_srcfc, sd_fc, sd_div) */ | |
| CPG_SD_DIV_TABLE_DATA(0, 0, 0, 1, 4), | |
| CPG_SD_DIV_TABLE_DATA(0, 0, 1, 1, 8), | |
| CPG_SD_DIV_TABLE_DATA(1, 0, 2, 1, 16), | |
| CPG_SD_DIV_TABLE_DATA(1, 0, 3, 1, 32), | |
| CPG_SD_DIV_TABLE_DATA(1, 0, 4, 1, 64), | |
| CPG_SD_DIV_TABLE_DATA(0, 0, 0, 0, 2), | |
| CPG_SD_DIV_TABLE_DATA(0, 0, 1, 0, 4), | |
| CPG_SD_DIV_TABLE_DATA(1, 0, 2, 0, 8), | |
| CPG_SD_DIV_TABLE_DATA(1, 0, 3, 0, 16), | |
| CPG_SD_DIV_TABLE_DATA(1, 0, 4, 0, 32), | |
| }; | |
| #define to_sd_clock(_hw) container_of(_hw, struct sd_clock, hw) | |
| static int cpg_sd_clock_enable(struct clk_hw *hw) | |
| { | |
| struct sd_clock *clock = to_sd_clock(hw); | |
| cpg_reg_modify(clock->csn.reg, CPG_SD_STP_MASK, | |
| clock->div_table[clock->cur_div_idx].val & | |
| CPG_SD_STP_MASK); | |
| return 0; | |
| } | |
| static void cpg_sd_clock_disable(struct clk_hw *hw) | |
| { | |
| struct sd_clock *clock = to_sd_clock(hw); | |
| cpg_reg_modify(clock->csn.reg, 0, CPG_SD_STP_MASK); | |
| } | |
| static int cpg_sd_clock_is_enabled(struct clk_hw *hw) | |
| { | |
| struct sd_clock *clock = to_sd_clock(hw); | |
| return !(readl(clock->csn.reg) & CPG_SD_STP_MASK); | |
| } | |
| static unsigned long cpg_sd_clock_recalc_rate(struct clk_hw *hw, | |
| unsigned long parent_rate) | |
| { | |
| struct sd_clock *clock = to_sd_clock(hw); | |
| return DIV_ROUND_CLOSEST(parent_rate, | |
| clock->div_table[clock->cur_div_idx].div); | |
| } | |
| static int cpg_sd_clock_determine_rate(struct clk_hw *hw, | |
| struct clk_rate_request *req) | |
| { | |
| unsigned long best_rate = ULONG_MAX, diff_min = ULONG_MAX; | |
| struct sd_clock *clock = to_sd_clock(hw); | |
| unsigned long calc_rate, diff; | |
| unsigned int i; | |
| for (i = 0; i < clock->div_num; i++) { | |
| calc_rate = DIV_ROUND_CLOSEST(req->best_parent_rate, | |
| clock->div_table[i].div); | |
| if (calc_rate < req->min_rate || calc_rate > req->max_rate) | |
| continue; | |
| diff = calc_rate > req->rate ? calc_rate - req->rate | |
| : req->rate - calc_rate; | |
| if (diff < diff_min) { | |
| best_rate = calc_rate; | |
| diff_min = diff; | |
| } | |
| } | |
| if (best_rate == ULONG_MAX) | |
| return -EINVAL; | |
| req->rate = best_rate; | |
| return 0; | |
| } | |
| static int cpg_sd_clock_set_rate(struct clk_hw *hw, unsigned long rate, | |
| unsigned long parent_rate) | |
| { | |
| struct sd_clock *clock = to_sd_clock(hw); | |
| unsigned int i; | |
| for (i = 0; i < clock->div_num; i++) | |
| if (rate == DIV_ROUND_CLOSEST(parent_rate, | |
| clock->div_table[i].div)) | |
| break; | |
| if (i >= clock->div_num) | |
| return -EINVAL; | |
| clock->cur_div_idx = i; | |
| cpg_reg_modify(clock->csn.reg, CPG_SD_STP_MASK | CPG_SD_FC_MASK, | |
| clock->div_table[i].val & | |
| (CPG_SD_STP_MASK | CPG_SD_FC_MASK)); | |
| return 0; | |
| } | |
| static const struct clk_ops cpg_sd_clock_ops = { | |
| .enable = cpg_sd_clock_enable, | |
| .disable = cpg_sd_clock_disable, | |
| .is_enabled = cpg_sd_clock_is_enabled, | |
| .recalc_rate = cpg_sd_clock_recalc_rate, | |
| .determine_rate = cpg_sd_clock_determine_rate, | |
| .set_rate = cpg_sd_clock_set_rate, | |
| }; | |
| static u32 cpg_quirks __initdata; | |
| #define PLL_ERRATA BIT(0) /* Missing PLL0/2/4 post-divider */ | |
| #define RCKCR_CKSEL BIT(1) /* Manual RCLK parent selection */ | |
| #define SD_SKIP_FIRST BIT(2) /* Skip first clock in SD table */ | |
| static struct clk * __init cpg_sd_clk_register(const char *name, | |
| void __iomem *base, unsigned int offset, const char *parent_name, | |
| struct raw_notifier_head *notifiers) | |
| { | |
| struct clk_init_data init; | |
| struct sd_clock *clock; | |
| struct clk *clk; | |
| u32 val; | |
| clock = kzalloc(sizeof(*clock), GFP_KERNEL); | |
| if (!clock) | |
| return ERR_PTR(-ENOMEM); | |
| init.name = name; | |
| init.ops = &cpg_sd_clock_ops; | |
| init.flags = CLK_SET_RATE_PARENT; | |
| init.parent_names = &parent_name; | |
| init.num_parents = 1; | |
| clock->csn.reg = base + offset; | |
| clock->hw.init = &init; | |
| clock->div_table = cpg_sd_div_table; | |
| clock->div_num = ARRAY_SIZE(cpg_sd_div_table); | |
| if (cpg_quirks & SD_SKIP_FIRST) { | |
| clock->div_table++; | |
| clock->div_num--; | |
| } | |
| val = readl(clock->csn.reg) & ~CPG_SD_FC_MASK; | |
| val |= CPG_SD_STP_MASK | (clock->div_table[0].val & CPG_SD_FC_MASK); | |
| writel(val, clock->csn.reg); | |
| clk = clk_register(NULL, &clock->hw); | |
| if (IS_ERR(clk)) | |
| goto free_clock; | |
| cpg_simple_notifier_register(notifiers, &clock->csn); | |
| return clk; | |
| free_clock: | |
| kfree(clock); | |
| return clk; | |
| } | |
| struct rpc_clock { | |
| struct clk_divider div; | |
| struct clk_gate gate; | |
| /* | |
| * One notifier covers both RPC and RPCD2 clocks as they are both | |
| * controlled by the same RPCCKCR register... | |
| */ | |
| struct cpg_simple_notifier csn; | |
| }; | |
| static const struct clk_div_table cpg_rpcsrc_div_table[] = { | |
| { 2, 5 }, { 3, 6 }, { 0, 0 }, | |
| }; | |
| static const struct clk_div_table cpg_rpc_div_table[] = { | |
| { 1, 2 }, { 3, 4 }, { 5, 6 }, { 7, 8 }, { 0, 0 }, | |
| }; | |
| static struct clk * __init cpg_rpc_clk_register(const char *name, | |
| void __iomem *base, const char *parent_name, | |
| struct raw_notifier_head *notifiers) | |
| { | |
| struct rpc_clock *rpc; | |
| struct clk *clk; | |
| rpc = kzalloc(sizeof(*rpc), GFP_KERNEL); | |
| if (!rpc) | |
| return ERR_PTR(-ENOMEM); | |
| rpc->div.reg = base + CPG_RPCCKCR; | |
| rpc->div.width = 3; | |
| rpc->div.table = cpg_rpc_div_table; | |
| rpc->div.lock = &cpg_lock; | |
| rpc->gate.reg = base + CPG_RPCCKCR; | |
| rpc->gate.bit_idx = 8; | |
| rpc->gate.flags = CLK_GATE_SET_TO_DISABLE; | |
| rpc->gate.lock = &cpg_lock; | |
| rpc->csn.reg = base + CPG_RPCCKCR; | |
| clk = clk_register_composite(NULL, name, &parent_name, 1, NULL, NULL, | |
| &rpc->div.hw, &clk_divider_ops, | |
| &rpc->gate.hw, &clk_gate_ops, | |
| CLK_SET_RATE_PARENT); | |
| if (IS_ERR(clk)) { | |
| kfree(rpc); | |
| return clk; | |
| } | |
| cpg_simple_notifier_register(notifiers, &rpc->csn); | |
| return clk; | |
| } | |
| struct rpcd2_clock { | |
| struct clk_fixed_factor fixed; | |
| struct clk_gate gate; | |
| }; | |
| static struct clk * __init cpg_rpcd2_clk_register(const char *name, | |
| void __iomem *base, | |
| const char *parent_name) | |
| { | |
| struct rpcd2_clock *rpcd2; | |
| struct clk *clk; | |
| rpcd2 = kzalloc(sizeof(*rpcd2), GFP_KERNEL); | |
| if (!rpcd2) | |
| return ERR_PTR(-ENOMEM); | |
| rpcd2->fixed.mult = 1; | |
| rpcd2->fixed.div = 2; | |
| rpcd2->gate.reg = base + CPG_RPCCKCR; | |
| rpcd2->gate.bit_idx = 9; | |
| rpcd2->gate.flags = CLK_GATE_SET_TO_DISABLE; | |
| rpcd2->gate.lock = &cpg_lock; | |
| clk = clk_register_composite(NULL, name, &parent_name, 1, NULL, NULL, | |
| &rpcd2->fixed.hw, &clk_fixed_factor_ops, | |
| &rpcd2->gate.hw, &clk_gate_ops, | |
| CLK_SET_RATE_PARENT); | |
| if (IS_ERR(clk)) | |
| kfree(rpcd2); | |
| return clk; | |
| } | |
| static const struct rcar_gen3_cpg_pll_config *cpg_pll_config __initdata; | |
| static unsigned int cpg_clk_extalr __initdata; | |
| static u32 cpg_mode __initdata; | |
| static const struct soc_device_attribute cpg_quirks_match[] __initconst = { | |
| { | |
| .soc_id = "r8a7795", .revision = "ES1.0", | |
| .data = (void *)(PLL_ERRATA | RCKCR_CKSEL | SD_SKIP_FIRST), | |
| }, | |
| { | |
| .soc_id = "r8a7795", .revision = "ES1.*", | |
| .data = (void *)(RCKCR_CKSEL | SD_SKIP_FIRST), | |
| }, | |
| { | |
| .soc_id = "r8a7795", .revision = "ES2.0", | |
| .data = (void *)SD_SKIP_FIRST, | |
| }, | |
| { | |
| .soc_id = "r8a7796", .revision = "ES1.0", | |
| .data = (void *)(RCKCR_CKSEL | SD_SKIP_FIRST), | |
| }, | |
| { | |
| .soc_id = "r8a7796", .revision = "ES1.1", | |
| .data = (void *)SD_SKIP_FIRST, | |
| }, | |
| { /* sentinel */ } | |
| }; | |
| struct clk * __init rcar_gen3_cpg_clk_register(struct device *dev, | |
| const struct cpg_core_clk *core, const struct cpg_mssr_info *info, | |
| struct clk **clks, void __iomem *base, | |
| struct raw_notifier_head *notifiers) | |
| { | |
| const struct clk *parent; | |
| unsigned int mult = 1; | |
| unsigned int div = 1; | |
| u32 value; | |
| parent = clks[core->parent & 0xffff]; /* some types use high bits */ | |
| if (IS_ERR(parent)) | |
| return ERR_CAST(parent); | |
| switch (core->type) { | |
| case CLK_TYPE_GEN3_MAIN: | |
| div = cpg_pll_config->extal_div; | |
| break; | |
| case CLK_TYPE_GEN3_PLL0: | |
| /* | |
| * PLL0 is a configurable multiplier clock. Register it as a | |
| * fixed factor clock for now as there's no generic multiplier | |
| * clock implementation and we currently have no need to change | |
| * the multiplier value. | |
| */ | |
| value = readl(base + CPG_PLL0CR); | |
| mult = (((value >> 24) & 0x7f) + 1) * 2; | |
| if (cpg_quirks & PLL_ERRATA) | |
| mult *= 2; | |
| break; | |
| case CLK_TYPE_GEN3_PLL1: | |
| mult = cpg_pll_config->pll1_mult; | |
| div = cpg_pll_config->pll1_div; | |
| break; | |
| case CLK_TYPE_GEN3_PLL2: | |
| /* | |
| * PLL2 is a configurable multiplier clock. Register it as a | |
| * fixed factor clock for now as there's no generic multiplier | |
| * clock implementation and we currently have no need to change | |
| * the multiplier value. | |
| */ | |
| value = readl(base + CPG_PLL2CR); | |
| mult = (((value >> 24) & 0x7f) + 1) * 2; | |
| if (cpg_quirks & PLL_ERRATA) | |
| mult *= 2; | |
| break; | |
| case CLK_TYPE_GEN3_PLL3: | |
| mult = cpg_pll_config->pll3_mult; | |
| div = cpg_pll_config->pll3_div; | |
| break; | |
| case CLK_TYPE_GEN3_PLL4: | |
| /* | |
| * PLL4 is a configurable multiplier clock. Register it as a | |
| * fixed factor clock for now as there's no generic multiplier | |
| * clock implementation and we currently have no need to change | |
| * the multiplier value. | |
| */ | |
| value = readl(base + CPG_PLL4CR); | |
| mult = (((value >> 24) & 0x7f) + 1) * 2; | |
| if (cpg_quirks & PLL_ERRATA) | |
| mult *= 2; | |
| break; | |
| case CLK_TYPE_GEN3_SD: | |
| return cpg_sd_clk_register(core->name, base, core->offset, | |
| __clk_get_name(parent), notifiers); | |
| case CLK_TYPE_GEN3_R: | |
| if (cpg_quirks & RCKCR_CKSEL) { | |
| struct cpg_simple_notifier *csn; | |
| csn = kzalloc(sizeof(*csn), GFP_KERNEL); | |
| if (!csn) | |
| return ERR_PTR(-ENOMEM); | |
| csn->reg = base + CPG_RCKCR; | |
| /* | |
| * RINT is default. | |
| * Only if EXTALR is populated, we switch to it. | |
| */ | |
| value = readl(csn->reg) & 0x3f; | |
| if (clk_get_rate(clks[cpg_clk_extalr])) { | |
| parent = clks[cpg_clk_extalr]; | |
| value |= CPG_RCKCR_CKSEL; | |
| } | |
| writel(value, csn->reg); | |
| cpg_simple_notifier_register(notifiers, csn); | |
| break; | |
| } | |
| /* Select parent clock of RCLK by MD28 */ | |
| if (cpg_mode & BIT(28)) | |
| parent = clks[cpg_clk_extalr]; | |
| break; | |
| case CLK_TYPE_GEN3_MDSEL: | |
| /* | |
| * Clock selectable between two parents and two fixed dividers | |
| * using a mode pin | |
| */ | |
| if (cpg_mode & BIT(core->offset)) { | |
| div = core->div & 0xffff; | |
| } else { | |
| parent = clks[core->parent >> 16]; | |
| if (IS_ERR(parent)) | |
| return ERR_CAST(parent); | |
| div = core->div >> 16; | |
| } | |
| mult = 1; | |
| break; | |
| case CLK_TYPE_GEN3_Z: | |
| return cpg_z_clk_register(core->name, __clk_get_name(parent), | |
| base, core->div, core->offset); | |
| case CLK_TYPE_GEN3_OSC: | |
| /* | |
| * Clock combining OSC EXTAL predivider and a fixed divider | |
| */ | |
| div = cpg_pll_config->osc_prediv * core->div; | |
| break; | |
| case CLK_TYPE_GEN3_RCKSEL: | |
| /* | |
| * Clock selectable between two parents and two fixed dividers | |
| * using RCKCR.CKSEL | |
| */ | |
| if (readl(base + CPG_RCKCR) & CPG_RCKCR_CKSEL) { | |
| div = core->div & 0xffff; | |
| } else { | |
| parent = clks[core->parent >> 16]; | |
| if (IS_ERR(parent)) | |
| return ERR_CAST(parent); | |
| div = core->div >> 16; | |
| } | |
| break; | |
| case CLK_TYPE_GEN3_RPCSRC: | |
| return clk_register_divider_table(NULL, core->name, | |
| __clk_get_name(parent), 0, | |
| base + CPG_RPCCKCR, 3, 2, 0, | |
| cpg_rpcsrc_div_table, | |
| &cpg_lock); | |
| case CLK_TYPE_GEN3_RPC: | |
| return cpg_rpc_clk_register(core->name, base, | |
| __clk_get_name(parent), notifiers); | |
| case CLK_TYPE_GEN3_RPCD2: | |
| return cpg_rpcd2_clk_register(core->name, base, | |
| __clk_get_name(parent)); | |
| default: | |
| return ERR_PTR(-EINVAL); | |
| } | |
| return clk_register_fixed_factor(NULL, core->name, | |
| __clk_get_name(parent), 0, mult, div); | |
| } | |
| int __init rcar_gen3_cpg_init(const struct rcar_gen3_cpg_pll_config *config, | |
| unsigned int clk_extalr, u32 mode) | |
| { | |
| const struct soc_device_attribute *attr; | |
| cpg_pll_config = config; | |
| cpg_clk_extalr = clk_extalr; | |
| cpg_mode = mode; | |
| attr = soc_device_match(cpg_quirks_match); | |
| if (attr) | |
| cpg_quirks = (uintptr_t)attr->data; | |
| pr_debug("%s: mode = 0x%x quirks = 0x%x\n", __func__, mode, cpg_quirks); | |
| spin_lock_init(&cpg_lock); | |
| return 0; | |
| } |