|  | // SPDX-License-Identifier: GPL-2.0 | 
|  | /* | 
|  | * Copyright (c) 2018, The Linux Foundation. All rights reserved. | 
|  | */ | 
|  |  | 
|  | #include <linux/bitfield.h> | 
|  | #include <linux/cpufreq.h> | 
|  | #include <linux/init.h> | 
|  | #include <linux/interconnect.h> | 
|  | #include <linux/kernel.h> | 
|  | #include <linux/module.h> | 
|  | #include <linux/of_address.h> | 
|  | #include <linux/of_platform.h> | 
|  | #include <linux/pm_opp.h> | 
|  | #include <linux/slab.h> | 
|  |  | 
|  | #define LUT_MAX_ENTRIES			40U | 
|  | #define LUT_SRC				GENMASK(31, 30) | 
|  | #define LUT_L_VAL			GENMASK(7, 0) | 
|  | #define LUT_CORE_COUNT			GENMASK(18, 16) | 
|  | #define LUT_VOLT			GENMASK(11, 0) | 
|  | #define CLK_HW_DIV			2 | 
|  | #define LUT_TURBO_IND			1 | 
|  |  | 
|  | struct qcom_cpufreq_soc_data { | 
|  | u32 reg_enable; | 
|  | u32 reg_freq_lut; | 
|  | u32 reg_volt_lut; | 
|  | u32 reg_perf_state; | 
|  | u8 lut_row_size; | 
|  | }; | 
|  |  | 
|  | struct qcom_cpufreq_data { | 
|  | void __iomem *base; | 
|  | struct resource *res; | 
|  | const struct qcom_cpufreq_soc_data *soc_data; | 
|  | }; | 
|  |  | 
|  | static unsigned long cpu_hw_rate, xo_rate; | 
|  | static bool icc_scaling_enabled; | 
|  |  | 
|  | static int qcom_cpufreq_set_bw(struct cpufreq_policy *policy, | 
|  | unsigned long freq_khz) | 
|  | { | 
|  | unsigned long freq_hz = freq_khz * 1000; | 
|  | struct dev_pm_opp *opp; | 
|  | struct device *dev; | 
|  | int ret; | 
|  |  | 
|  | dev = get_cpu_device(policy->cpu); | 
|  | if (!dev) | 
|  | return -ENODEV; | 
|  |  | 
|  | opp = dev_pm_opp_find_freq_exact(dev, freq_hz, true); | 
|  | if (IS_ERR(opp)) | 
|  | return PTR_ERR(opp); | 
|  |  | 
|  | ret = dev_pm_opp_set_opp(dev, opp); | 
|  | dev_pm_opp_put(opp); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int qcom_cpufreq_update_opp(struct device *cpu_dev, | 
|  | unsigned long freq_khz, | 
|  | unsigned long volt) | 
|  | { | 
|  | unsigned long freq_hz = freq_khz * 1000; | 
|  | int ret; | 
|  |  | 
|  | /* Skip voltage update if the opp table is not available */ | 
|  | if (!icc_scaling_enabled) | 
|  | return dev_pm_opp_add(cpu_dev, freq_hz, volt); | 
|  |  | 
|  | ret = dev_pm_opp_adjust_voltage(cpu_dev, freq_hz, volt, volt, volt); | 
|  | if (ret) { | 
|  | dev_err(cpu_dev, "Voltage update failed freq=%ld\n", freq_khz); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | return dev_pm_opp_enable(cpu_dev, freq_hz); | 
|  | } | 
|  |  | 
|  | static int qcom_cpufreq_hw_target_index(struct cpufreq_policy *policy, | 
|  | unsigned int index) | 
|  | { | 
|  | struct qcom_cpufreq_data *data = policy->driver_data; | 
|  | const struct qcom_cpufreq_soc_data *soc_data = data->soc_data; | 
|  | unsigned long freq = policy->freq_table[index].frequency; | 
|  |  | 
|  | writel_relaxed(index, data->base + soc_data->reg_perf_state); | 
|  |  | 
|  | if (icc_scaling_enabled) | 
|  | qcom_cpufreq_set_bw(policy, freq); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static unsigned int qcom_cpufreq_hw_get(unsigned int cpu) | 
|  | { | 
|  | struct qcom_cpufreq_data *data; | 
|  | const struct qcom_cpufreq_soc_data *soc_data; | 
|  | struct cpufreq_policy *policy; | 
|  | unsigned int index; | 
|  |  | 
|  | policy = cpufreq_cpu_get_raw(cpu); | 
|  | if (!policy) | 
|  | return 0; | 
|  |  | 
|  | data = policy->driver_data; | 
|  | soc_data = data->soc_data; | 
|  |  | 
|  | index = readl_relaxed(data->base + soc_data->reg_perf_state); | 
|  | index = min(index, LUT_MAX_ENTRIES - 1); | 
|  |  | 
|  | return policy->freq_table[index].frequency; | 
|  | } | 
|  |  | 
|  | static unsigned int qcom_cpufreq_hw_fast_switch(struct cpufreq_policy *policy, | 
|  | unsigned int target_freq) | 
|  | { | 
|  | struct qcom_cpufreq_data *data = policy->driver_data; | 
|  | const struct qcom_cpufreq_soc_data *soc_data = data->soc_data; | 
|  | unsigned int index; | 
|  |  | 
|  | index = policy->cached_resolved_idx; | 
|  | writel_relaxed(index, data->base + soc_data->reg_perf_state); | 
|  |  | 
|  | return policy->freq_table[index].frequency; | 
|  | } | 
|  |  | 
|  | static int qcom_cpufreq_hw_read_lut(struct device *cpu_dev, | 
|  | struct cpufreq_policy *policy) | 
|  | { | 
|  | u32 data, src, lval, i, core_count, prev_freq = 0, freq; | 
|  | u32 volt; | 
|  | struct cpufreq_frequency_table	*table; | 
|  | struct dev_pm_opp *opp; | 
|  | unsigned long rate; | 
|  | int ret; | 
|  | struct qcom_cpufreq_data *drv_data = policy->driver_data; | 
|  | const struct qcom_cpufreq_soc_data *soc_data = drv_data->soc_data; | 
|  |  | 
|  | table = kcalloc(LUT_MAX_ENTRIES + 1, sizeof(*table), GFP_KERNEL); | 
|  | if (!table) | 
|  | return -ENOMEM; | 
|  |  | 
|  | ret = dev_pm_opp_of_add_table(cpu_dev); | 
|  | if (!ret) { | 
|  | /* Disable all opps and cross-validate against LUT later */ | 
|  | icc_scaling_enabled = true; | 
|  | for (rate = 0; ; rate++) { | 
|  | opp = dev_pm_opp_find_freq_ceil(cpu_dev, &rate); | 
|  | if (IS_ERR(opp)) | 
|  | break; | 
|  |  | 
|  | dev_pm_opp_put(opp); | 
|  | dev_pm_opp_disable(cpu_dev, rate); | 
|  | } | 
|  | } else if (ret != -ENODEV) { | 
|  | dev_err(cpu_dev, "Invalid opp table in device tree\n"); | 
|  | return ret; | 
|  | } else { | 
|  | policy->fast_switch_possible = true; | 
|  | icc_scaling_enabled = false; | 
|  | } | 
|  |  | 
|  | for (i = 0; i < LUT_MAX_ENTRIES; i++) { | 
|  | data = readl_relaxed(drv_data->base + soc_data->reg_freq_lut + | 
|  | i * soc_data->lut_row_size); | 
|  | src = FIELD_GET(LUT_SRC, data); | 
|  | lval = FIELD_GET(LUT_L_VAL, data); | 
|  | core_count = FIELD_GET(LUT_CORE_COUNT, data); | 
|  |  | 
|  | data = readl_relaxed(drv_data->base + soc_data->reg_volt_lut + | 
|  | i * soc_data->lut_row_size); | 
|  | volt = FIELD_GET(LUT_VOLT, data) * 1000; | 
|  |  | 
|  | if (src) | 
|  | freq = xo_rate * lval / 1000; | 
|  | else | 
|  | freq = cpu_hw_rate / 1000; | 
|  |  | 
|  | if (freq != prev_freq && core_count != LUT_TURBO_IND) { | 
|  | if (!qcom_cpufreq_update_opp(cpu_dev, freq, volt)) { | 
|  | table[i].frequency = freq; | 
|  | dev_dbg(cpu_dev, "index=%d freq=%d, core_count %d\n", i, | 
|  | freq, core_count); | 
|  | } else { | 
|  | dev_warn(cpu_dev, "failed to update OPP for freq=%d\n", freq); | 
|  | table[i].frequency = CPUFREQ_ENTRY_INVALID; | 
|  | } | 
|  |  | 
|  | } else if (core_count == LUT_TURBO_IND) { | 
|  | table[i].frequency = CPUFREQ_ENTRY_INVALID; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Two of the same frequencies with the same core counts means | 
|  | * end of table | 
|  | */ | 
|  | if (i > 0 && prev_freq == freq) { | 
|  | struct cpufreq_frequency_table *prev = &table[i - 1]; | 
|  |  | 
|  | /* | 
|  | * Only treat the last frequency that might be a boost | 
|  | * as the boost frequency | 
|  | */ | 
|  | if (prev->frequency == CPUFREQ_ENTRY_INVALID) { | 
|  | if (!qcom_cpufreq_update_opp(cpu_dev, prev_freq, volt)) { | 
|  | prev->frequency = prev_freq; | 
|  | prev->flags = CPUFREQ_BOOST_FREQ; | 
|  | } else { | 
|  | dev_warn(cpu_dev, "failed to update OPP for freq=%d\n", | 
|  | freq); | 
|  | } | 
|  | } | 
|  |  | 
|  | break; | 
|  | } | 
|  |  | 
|  | prev_freq = freq; | 
|  | } | 
|  |  | 
|  | table[i].frequency = CPUFREQ_TABLE_END; | 
|  | policy->freq_table = table; | 
|  | dev_pm_opp_set_sharing_cpus(cpu_dev, policy->cpus); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void qcom_get_related_cpus(int index, struct cpumask *m) | 
|  | { | 
|  | struct device_node *cpu_np; | 
|  | struct of_phandle_args args; | 
|  | int cpu, ret; | 
|  |  | 
|  | for_each_possible_cpu(cpu) { | 
|  | cpu_np = of_cpu_device_node_get(cpu); | 
|  | if (!cpu_np) | 
|  | continue; | 
|  |  | 
|  | ret = of_parse_phandle_with_args(cpu_np, "qcom,freq-domain", | 
|  | "#freq-domain-cells", 0, | 
|  | &args); | 
|  | of_node_put(cpu_np); | 
|  | if (ret < 0) | 
|  | continue; | 
|  |  | 
|  | if (index == args.args[0]) | 
|  | cpumask_set_cpu(cpu, m); | 
|  | } | 
|  | } | 
|  |  | 
|  | static const struct qcom_cpufreq_soc_data qcom_soc_data = { | 
|  | .reg_enable = 0x0, | 
|  | .reg_freq_lut = 0x110, | 
|  | .reg_volt_lut = 0x114, | 
|  | .reg_perf_state = 0x920, | 
|  | .lut_row_size = 32, | 
|  | }; | 
|  |  | 
|  | static const struct qcom_cpufreq_soc_data epss_soc_data = { | 
|  | .reg_enable = 0x0, | 
|  | .reg_freq_lut = 0x100, | 
|  | .reg_volt_lut = 0x200, | 
|  | .reg_perf_state = 0x320, | 
|  | .lut_row_size = 4, | 
|  | }; | 
|  |  | 
|  | static const struct of_device_id qcom_cpufreq_hw_match[] = { | 
|  | { .compatible = "qcom,cpufreq-hw", .data = &qcom_soc_data }, | 
|  | { .compatible = "qcom,cpufreq-epss", .data = &epss_soc_data }, | 
|  | {} | 
|  | }; | 
|  | MODULE_DEVICE_TABLE(of, qcom_cpufreq_hw_match); | 
|  |  | 
|  | static int qcom_cpufreq_hw_cpu_init(struct cpufreq_policy *policy) | 
|  | { | 
|  | struct platform_device *pdev = cpufreq_get_driver_data(); | 
|  | struct device *dev = &pdev->dev; | 
|  | struct of_phandle_args args; | 
|  | struct device_node *cpu_np; | 
|  | struct device *cpu_dev; | 
|  | struct resource *res; | 
|  | void __iomem *base; | 
|  | struct qcom_cpufreq_data *data; | 
|  | int ret, index; | 
|  |  | 
|  | cpu_dev = get_cpu_device(policy->cpu); | 
|  | if (!cpu_dev) { | 
|  | pr_err("%s: failed to get cpu%d device\n", __func__, | 
|  | policy->cpu); | 
|  | return -ENODEV; | 
|  | } | 
|  |  | 
|  | cpu_np = of_cpu_device_node_get(policy->cpu); | 
|  | if (!cpu_np) | 
|  | return -EINVAL; | 
|  |  | 
|  | ret = of_parse_phandle_with_args(cpu_np, "qcom,freq-domain", | 
|  | "#freq-domain-cells", 0, &args); | 
|  | of_node_put(cpu_np); | 
|  | if (ret) | 
|  | return ret; | 
|  |  | 
|  | index = args.args[0]; | 
|  |  | 
|  | res = platform_get_resource(pdev, IORESOURCE_MEM, index); | 
|  | if (!res) { | 
|  | dev_err(dev, "failed to get mem resource %d\n", index); | 
|  | return -ENODEV; | 
|  | } | 
|  |  | 
|  | if (!request_mem_region(res->start, resource_size(res), res->name)) { | 
|  | dev_err(dev, "failed to request resource %pR\n", res); | 
|  | return -EBUSY; | 
|  | } | 
|  |  | 
|  | base = ioremap(res->start, resource_size(res)); | 
|  | if (!base) { | 
|  | dev_err(dev, "failed to map resource %pR\n", res); | 
|  | ret = -ENOMEM; | 
|  | goto release_region; | 
|  | } | 
|  |  | 
|  | data = kzalloc(sizeof(*data), GFP_KERNEL); | 
|  | if (!data) { | 
|  | ret = -ENOMEM; | 
|  | goto unmap_base; | 
|  | } | 
|  |  | 
|  | data->soc_data = of_device_get_match_data(&pdev->dev); | 
|  | data->base = base; | 
|  | data->res = res; | 
|  |  | 
|  | /* HW should be in enabled state to proceed */ | 
|  | if (!(readl_relaxed(base + data->soc_data->reg_enable) & 0x1)) { | 
|  | dev_err(dev, "Domain-%d cpufreq hardware not enabled\n", index); | 
|  | ret = -ENODEV; | 
|  | goto error; | 
|  | } | 
|  |  | 
|  | qcom_get_related_cpus(index, policy->cpus); | 
|  | if (!cpumask_weight(policy->cpus)) { | 
|  | dev_err(dev, "Domain-%d failed to get related CPUs\n", index); | 
|  | ret = -ENOENT; | 
|  | goto error; | 
|  | } | 
|  |  | 
|  | policy->driver_data = data; | 
|  |  | 
|  | ret = qcom_cpufreq_hw_read_lut(cpu_dev, policy); | 
|  | if (ret) { | 
|  | dev_err(dev, "Domain-%d failed to read LUT\n", index); | 
|  | goto error; | 
|  | } | 
|  |  | 
|  | ret = dev_pm_opp_get_opp_count(cpu_dev); | 
|  | if (ret <= 0) { | 
|  | dev_err(cpu_dev, "Failed to add OPPs\n"); | 
|  | ret = -ENODEV; | 
|  | goto error; | 
|  | } | 
|  |  | 
|  | dev_pm_opp_of_register_em(cpu_dev, policy->cpus); | 
|  |  | 
|  | if (policy_has_boost_freq(policy)) { | 
|  | ret = cpufreq_enable_boost_support(); | 
|  | if (ret) | 
|  | dev_warn(cpu_dev, "failed to enable boost: %d\n", ret); | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | error: | 
|  | kfree(data); | 
|  | unmap_base: | 
|  | iounmap(base); | 
|  | release_region: | 
|  | release_mem_region(res->start, resource_size(res)); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int qcom_cpufreq_hw_cpu_exit(struct cpufreq_policy *policy) | 
|  | { | 
|  | struct device *cpu_dev = get_cpu_device(policy->cpu); | 
|  | struct qcom_cpufreq_data *data = policy->driver_data; | 
|  | struct resource *res = data->res; | 
|  | void __iomem *base = data->base; | 
|  |  | 
|  | dev_pm_opp_remove_all_dynamic(cpu_dev); | 
|  | dev_pm_opp_of_cpumask_remove_table(policy->related_cpus); | 
|  | kfree(policy->freq_table); | 
|  | kfree(data); | 
|  | iounmap(base); | 
|  | release_mem_region(res->start, resource_size(res)); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static struct freq_attr *qcom_cpufreq_hw_attr[] = { | 
|  | &cpufreq_freq_attr_scaling_available_freqs, | 
|  | &cpufreq_freq_attr_scaling_boost_freqs, | 
|  | NULL | 
|  | }; | 
|  |  | 
|  | static struct cpufreq_driver cpufreq_qcom_hw_driver = { | 
|  | .flags		= CPUFREQ_NEED_INITIAL_FREQ_CHECK | | 
|  | CPUFREQ_HAVE_GOVERNOR_PER_POLICY | | 
|  | CPUFREQ_IS_COOLING_DEV, | 
|  | .verify		= cpufreq_generic_frequency_table_verify, | 
|  | .target_index	= qcom_cpufreq_hw_target_index, | 
|  | .get		= qcom_cpufreq_hw_get, | 
|  | .init		= qcom_cpufreq_hw_cpu_init, | 
|  | .exit		= qcom_cpufreq_hw_cpu_exit, | 
|  | .fast_switch    = qcom_cpufreq_hw_fast_switch, | 
|  | .name		= "qcom-cpufreq-hw", | 
|  | .attr		= qcom_cpufreq_hw_attr, | 
|  | }; | 
|  |  | 
|  | static int qcom_cpufreq_hw_driver_probe(struct platform_device *pdev) | 
|  | { | 
|  | struct device *cpu_dev; | 
|  | struct clk *clk; | 
|  | int ret; | 
|  |  | 
|  | clk = clk_get(&pdev->dev, "xo"); | 
|  | if (IS_ERR(clk)) | 
|  | return PTR_ERR(clk); | 
|  |  | 
|  | xo_rate = clk_get_rate(clk); | 
|  | clk_put(clk); | 
|  |  | 
|  | clk = clk_get(&pdev->dev, "alternate"); | 
|  | if (IS_ERR(clk)) | 
|  | return PTR_ERR(clk); | 
|  |  | 
|  | cpu_hw_rate = clk_get_rate(clk) / CLK_HW_DIV; | 
|  | clk_put(clk); | 
|  |  | 
|  | cpufreq_qcom_hw_driver.driver_data = pdev; | 
|  |  | 
|  | /* Check for optional interconnect paths on CPU0 */ | 
|  | cpu_dev = get_cpu_device(0); | 
|  | if (!cpu_dev) | 
|  | return -EPROBE_DEFER; | 
|  |  | 
|  | ret = dev_pm_opp_of_find_icc_paths(cpu_dev, NULL); | 
|  | if (ret) | 
|  | return ret; | 
|  |  | 
|  | ret = cpufreq_register_driver(&cpufreq_qcom_hw_driver); | 
|  | if (ret) | 
|  | dev_err(&pdev->dev, "CPUFreq HW driver failed to register\n"); | 
|  | else | 
|  | dev_dbg(&pdev->dev, "QCOM CPUFreq HW driver initialized\n"); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int qcom_cpufreq_hw_driver_remove(struct platform_device *pdev) | 
|  | { | 
|  | return cpufreq_unregister_driver(&cpufreq_qcom_hw_driver); | 
|  | } | 
|  |  | 
|  | static struct platform_driver qcom_cpufreq_hw_driver = { | 
|  | .probe = qcom_cpufreq_hw_driver_probe, | 
|  | .remove = qcom_cpufreq_hw_driver_remove, | 
|  | .driver = { | 
|  | .name = "qcom-cpufreq-hw", | 
|  | .of_match_table = qcom_cpufreq_hw_match, | 
|  | }, | 
|  | }; | 
|  |  | 
|  | static int __init qcom_cpufreq_hw_init(void) | 
|  | { | 
|  | return platform_driver_register(&qcom_cpufreq_hw_driver); | 
|  | } | 
|  | postcore_initcall(qcom_cpufreq_hw_init); | 
|  |  | 
|  | static void __exit qcom_cpufreq_hw_exit(void) | 
|  | { | 
|  | platform_driver_unregister(&qcom_cpufreq_hw_driver); | 
|  | } | 
|  | module_exit(qcom_cpufreq_hw_exit); | 
|  |  | 
|  | MODULE_DESCRIPTION("QCOM CPUFREQ HW Driver"); | 
|  | MODULE_LICENSE("GPL v2"); |