|  | // SPDX-License-Identifier: GPL-2.0-only | 
|  | /* | 
|  | * Broadcom Kona GPIO Driver | 
|  | * | 
|  | * Author: Broadcom Corporation <bcm-kernel-feedback-list@broadcom.com> | 
|  | * Copyright (C) 2012-2014 Broadcom Corporation | 
|  | */ | 
|  |  | 
|  | #include <linux/bitops.h> | 
|  | #include <linux/err.h> | 
|  | #include <linux/gpio/driver.h> | 
|  | #include <linux/init.h> | 
|  | #include <linux/io.h> | 
|  | #include <linux/irqdomain.h> | 
|  | #include <linux/irqchip/chained_irq.h> | 
|  | #include <linux/mod_devicetable.h> | 
|  | #include <linux/platform_device.h> | 
|  | #include <linux/property.h> | 
|  |  | 
|  | #define BCM_GPIO_PASSWD				0x00a5a501 | 
|  | #define GPIO_PER_BANK				32 | 
|  | #define GPIO_MAX_BANK_NUM			8 | 
|  |  | 
|  | #define GPIO_BANK(gpio)				((gpio) >> 5) | 
|  | #define GPIO_BIT(gpio)				((gpio) & (GPIO_PER_BANK - 1)) | 
|  |  | 
|  | /* There is a GPIO control register for each GPIO */ | 
|  | #define GPIO_CONTROL(gpio)			(0x00000100 + ((gpio) << 2)) | 
|  |  | 
|  | /* The remaining registers are per GPIO bank */ | 
|  | #define GPIO_OUT_STATUS(bank)			(0x00000000 + ((bank) << 2)) | 
|  | #define GPIO_IN_STATUS(bank)			(0x00000020 + ((bank) << 2)) | 
|  | #define GPIO_OUT_SET(bank)			(0x00000040 + ((bank) << 2)) | 
|  | #define GPIO_OUT_CLEAR(bank)			(0x00000060 + ((bank) << 2)) | 
|  | #define GPIO_INT_STATUS(bank)			(0x00000080 + ((bank) << 2)) | 
|  | #define GPIO_INT_MASK(bank)			(0x000000a0 + ((bank) << 2)) | 
|  | #define GPIO_INT_MSKCLR(bank)			(0x000000c0 + ((bank) << 2)) | 
|  | #define GPIO_PWD_STATUS(bank)			(0x00000500 + ((bank) << 2)) | 
|  |  | 
|  | #define GPIO_GPPWR_OFFSET			0x00000520 | 
|  |  | 
|  | #define GPIO_GPCTR0_DBR_SHIFT			5 | 
|  | #define GPIO_GPCTR0_DBR_MASK			0x000001e0 | 
|  |  | 
|  | #define GPIO_GPCTR0_ITR_SHIFT			3 | 
|  | #define GPIO_GPCTR0_ITR_MASK			0x00000018 | 
|  | #define GPIO_GPCTR0_ITR_CMD_RISING_EDGE		0x00000001 | 
|  | #define GPIO_GPCTR0_ITR_CMD_FALLING_EDGE	0x00000002 | 
|  | #define GPIO_GPCTR0_ITR_CMD_BOTH_EDGE		0x00000003 | 
|  |  | 
|  | #define GPIO_GPCTR0_IOTR_MASK			0x00000001 | 
|  | #define GPIO_GPCTR0_IOTR_CMD_0UTPUT		0x00000000 | 
|  | #define GPIO_GPCTR0_IOTR_CMD_INPUT		0x00000001 | 
|  |  | 
|  | #define GPIO_GPCTR0_DB_ENABLE_MASK		0x00000100 | 
|  |  | 
|  | #define LOCK_CODE				0xffffffff | 
|  | #define UNLOCK_CODE				0x00000000 | 
|  |  | 
|  | struct bcm_kona_gpio { | 
|  | void __iomem *reg_base; | 
|  | int num_bank; | 
|  | raw_spinlock_t lock; | 
|  | struct gpio_chip gpio_chip; | 
|  | struct irq_domain *irq_domain; | 
|  | struct bcm_kona_gpio_bank *banks; | 
|  | }; | 
|  |  | 
|  | struct bcm_kona_gpio_bank { | 
|  | int id; | 
|  | int irq; | 
|  | /* Used in the interrupt handler */ | 
|  | struct bcm_kona_gpio *kona_gpio; | 
|  | }; | 
|  |  | 
|  | static inline void bcm_kona_gpio_write_lock_regs(void __iomem *reg_base, | 
|  | int bank_id, u32 lockcode) | 
|  | { | 
|  | writel(BCM_GPIO_PASSWD, reg_base + GPIO_GPPWR_OFFSET); | 
|  | writel(lockcode, reg_base + GPIO_PWD_STATUS(bank_id)); | 
|  | } | 
|  |  | 
|  | static void bcm_kona_gpio_lock_gpio(struct bcm_kona_gpio *kona_gpio, | 
|  | unsigned gpio) | 
|  | { | 
|  | u32 val; | 
|  | unsigned long flags; | 
|  | int bank_id = GPIO_BANK(gpio); | 
|  |  | 
|  | raw_spin_lock_irqsave(&kona_gpio->lock, flags); | 
|  |  | 
|  | val = readl(kona_gpio->reg_base + GPIO_PWD_STATUS(bank_id)); | 
|  | val |= BIT(gpio); | 
|  | bcm_kona_gpio_write_lock_regs(kona_gpio->reg_base, bank_id, val); | 
|  |  | 
|  | raw_spin_unlock_irqrestore(&kona_gpio->lock, flags); | 
|  | } | 
|  |  | 
|  | static void bcm_kona_gpio_unlock_gpio(struct bcm_kona_gpio *kona_gpio, | 
|  | unsigned gpio) | 
|  | { | 
|  | u32 val; | 
|  | unsigned long flags; | 
|  | int bank_id = GPIO_BANK(gpio); | 
|  |  | 
|  | raw_spin_lock_irqsave(&kona_gpio->lock, flags); | 
|  |  | 
|  | val = readl(kona_gpio->reg_base + GPIO_PWD_STATUS(bank_id)); | 
|  | val &= ~BIT(gpio); | 
|  | bcm_kona_gpio_write_lock_regs(kona_gpio->reg_base, bank_id, val); | 
|  |  | 
|  | raw_spin_unlock_irqrestore(&kona_gpio->lock, flags); | 
|  | } | 
|  |  | 
|  | static int bcm_kona_gpio_get_dir(struct gpio_chip *chip, unsigned gpio) | 
|  | { | 
|  | struct bcm_kona_gpio *kona_gpio = gpiochip_get_data(chip); | 
|  | void __iomem *reg_base = kona_gpio->reg_base; | 
|  | u32 val; | 
|  |  | 
|  | val = readl(reg_base + GPIO_CONTROL(gpio)) & GPIO_GPCTR0_IOTR_MASK; | 
|  | return val ? GPIO_LINE_DIRECTION_IN : GPIO_LINE_DIRECTION_OUT; | 
|  | } | 
|  |  | 
|  | static void bcm_kona_gpio_set(struct gpio_chip *chip, unsigned gpio, int value) | 
|  | { | 
|  | struct bcm_kona_gpio *kona_gpio; | 
|  | void __iomem *reg_base; | 
|  | int bank_id = GPIO_BANK(gpio); | 
|  | int bit = GPIO_BIT(gpio); | 
|  | u32 val, reg_offset; | 
|  | unsigned long flags; | 
|  |  | 
|  | kona_gpio = gpiochip_get_data(chip); | 
|  | reg_base = kona_gpio->reg_base; | 
|  | raw_spin_lock_irqsave(&kona_gpio->lock, flags); | 
|  |  | 
|  | /* this function only applies to output pin */ | 
|  | if (bcm_kona_gpio_get_dir(chip, gpio) == GPIO_LINE_DIRECTION_IN) | 
|  | goto out; | 
|  |  | 
|  | reg_offset = value ? GPIO_OUT_SET(bank_id) : GPIO_OUT_CLEAR(bank_id); | 
|  |  | 
|  | val = readl(reg_base + reg_offset); | 
|  | val |= BIT(bit); | 
|  | writel(val, reg_base + reg_offset); | 
|  |  | 
|  | out: | 
|  | raw_spin_unlock_irqrestore(&kona_gpio->lock, flags); | 
|  | } | 
|  |  | 
|  | static int bcm_kona_gpio_get(struct gpio_chip *chip, unsigned gpio) | 
|  | { | 
|  | struct bcm_kona_gpio *kona_gpio; | 
|  | void __iomem *reg_base; | 
|  | int bank_id = GPIO_BANK(gpio); | 
|  | int bit = GPIO_BIT(gpio); | 
|  | u32 val, reg_offset; | 
|  | unsigned long flags; | 
|  |  | 
|  | kona_gpio = gpiochip_get_data(chip); | 
|  | reg_base = kona_gpio->reg_base; | 
|  | raw_spin_lock_irqsave(&kona_gpio->lock, flags); | 
|  |  | 
|  | if (bcm_kona_gpio_get_dir(chip, gpio) == GPIO_LINE_DIRECTION_IN) | 
|  | reg_offset = GPIO_IN_STATUS(bank_id); | 
|  | else | 
|  | reg_offset = GPIO_OUT_STATUS(bank_id); | 
|  |  | 
|  | /* read the GPIO bank status */ | 
|  | val = readl(reg_base + reg_offset); | 
|  |  | 
|  | raw_spin_unlock_irqrestore(&kona_gpio->lock, flags); | 
|  |  | 
|  | /* return the specified bit status */ | 
|  | return !!(val & BIT(bit)); | 
|  | } | 
|  |  | 
|  | static int bcm_kona_gpio_request(struct gpio_chip *chip, unsigned gpio) | 
|  | { | 
|  | struct bcm_kona_gpio *kona_gpio = gpiochip_get_data(chip); | 
|  |  | 
|  | bcm_kona_gpio_unlock_gpio(kona_gpio, gpio); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void bcm_kona_gpio_free(struct gpio_chip *chip, unsigned gpio) | 
|  | { | 
|  | struct bcm_kona_gpio *kona_gpio = gpiochip_get_data(chip); | 
|  |  | 
|  | bcm_kona_gpio_lock_gpio(kona_gpio, gpio); | 
|  | } | 
|  |  | 
|  | static int bcm_kona_gpio_direction_input(struct gpio_chip *chip, unsigned gpio) | 
|  | { | 
|  | struct bcm_kona_gpio *kona_gpio; | 
|  | void __iomem *reg_base; | 
|  | u32 val; | 
|  | unsigned long flags; | 
|  |  | 
|  | kona_gpio = gpiochip_get_data(chip); | 
|  | reg_base = kona_gpio->reg_base; | 
|  | raw_spin_lock_irqsave(&kona_gpio->lock, flags); | 
|  |  | 
|  | val = readl(reg_base + GPIO_CONTROL(gpio)); | 
|  | val &= ~GPIO_GPCTR0_IOTR_MASK; | 
|  | val |= GPIO_GPCTR0_IOTR_CMD_INPUT; | 
|  | writel(val, reg_base + GPIO_CONTROL(gpio)); | 
|  |  | 
|  | raw_spin_unlock_irqrestore(&kona_gpio->lock, flags); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int bcm_kona_gpio_direction_output(struct gpio_chip *chip, | 
|  | unsigned gpio, int value) | 
|  | { | 
|  | struct bcm_kona_gpio *kona_gpio; | 
|  | void __iomem *reg_base; | 
|  | int bank_id = GPIO_BANK(gpio); | 
|  | int bit = GPIO_BIT(gpio); | 
|  | u32 val, reg_offset; | 
|  | unsigned long flags; | 
|  |  | 
|  | kona_gpio = gpiochip_get_data(chip); | 
|  | reg_base = kona_gpio->reg_base; | 
|  | raw_spin_lock_irqsave(&kona_gpio->lock, flags); | 
|  |  | 
|  | val = readl(reg_base + GPIO_CONTROL(gpio)); | 
|  | val &= ~GPIO_GPCTR0_IOTR_MASK; | 
|  | val |= GPIO_GPCTR0_IOTR_CMD_0UTPUT; | 
|  | writel(val, reg_base + GPIO_CONTROL(gpio)); | 
|  | reg_offset = value ? GPIO_OUT_SET(bank_id) : GPIO_OUT_CLEAR(bank_id); | 
|  |  | 
|  | val = readl(reg_base + reg_offset); | 
|  | val |= BIT(bit); | 
|  | writel(val, reg_base + reg_offset); | 
|  |  | 
|  | raw_spin_unlock_irqrestore(&kona_gpio->lock, flags); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int bcm_kona_gpio_to_irq(struct gpio_chip *chip, unsigned gpio) | 
|  | { | 
|  | struct bcm_kona_gpio *kona_gpio; | 
|  |  | 
|  | kona_gpio = gpiochip_get_data(chip); | 
|  | if (gpio >= kona_gpio->gpio_chip.ngpio) | 
|  | return -ENXIO; | 
|  | return irq_create_mapping(kona_gpio->irq_domain, gpio); | 
|  | } | 
|  |  | 
|  | static int bcm_kona_gpio_set_debounce(struct gpio_chip *chip, unsigned gpio, | 
|  | unsigned debounce) | 
|  | { | 
|  | struct bcm_kona_gpio *kona_gpio; | 
|  | void __iomem *reg_base; | 
|  | u32 val, res; | 
|  | unsigned long flags; | 
|  |  | 
|  | kona_gpio = gpiochip_get_data(chip); | 
|  | reg_base = kona_gpio->reg_base; | 
|  | /* debounce must be 1-128ms (or 0) */ | 
|  | if ((debounce > 0 && debounce < 1000) || debounce > 128000) { | 
|  | dev_err(chip->parent, "Debounce value %u not in range\n", | 
|  | debounce); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | /* calculate debounce bit value */ | 
|  | if (debounce != 0) { | 
|  | /* Convert to ms */ | 
|  | debounce /= 1000; | 
|  | /* find the MSB */ | 
|  | res = fls(debounce) - 1; | 
|  | /* Check if MSB-1 is set (round up or down) */ | 
|  | if (res > 0 && (debounce & BIT(res - 1))) | 
|  | res++; | 
|  | } | 
|  |  | 
|  | /* spin lock for read-modify-write of the GPIO register */ | 
|  | raw_spin_lock_irqsave(&kona_gpio->lock, flags); | 
|  |  | 
|  | val = readl(reg_base + GPIO_CONTROL(gpio)); | 
|  | val &= ~GPIO_GPCTR0_DBR_MASK; | 
|  |  | 
|  | if (debounce == 0) { | 
|  | /* disable debounce */ | 
|  | val &= ~GPIO_GPCTR0_DB_ENABLE_MASK; | 
|  | } else { | 
|  | val |= GPIO_GPCTR0_DB_ENABLE_MASK | | 
|  | (res << GPIO_GPCTR0_DBR_SHIFT); | 
|  | } | 
|  |  | 
|  | writel(val, reg_base + GPIO_CONTROL(gpio)); | 
|  |  | 
|  | raw_spin_unlock_irqrestore(&kona_gpio->lock, flags); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int bcm_kona_gpio_set_config(struct gpio_chip *chip, unsigned gpio, | 
|  | unsigned long config) | 
|  | { | 
|  | u32 debounce; | 
|  |  | 
|  | if (pinconf_to_config_param(config) != PIN_CONFIG_INPUT_DEBOUNCE) | 
|  | return -ENOTSUPP; | 
|  |  | 
|  | debounce = pinconf_to_config_argument(config); | 
|  | return bcm_kona_gpio_set_debounce(chip, gpio, debounce); | 
|  | } | 
|  |  | 
|  | static const struct gpio_chip template_chip = { | 
|  | .label = "bcm-kona-gpio", | 
|  | .owner = THIS_MODULE, | 
|  | .request = bcm_kona_gpio_request, | 
|  | .free = bcm_kona_gpio_free, | 
|  | .get_direction = bcm_kona_gpio_get_dir, | 
|  | .direction_input = bcm_kona_gpio_direction_input, | 
|  | .get = bcm_kona_gpio_get, | 
|  | .direction_output = bcm_kona_gpio_direction_output, | 
|  | .set = bcm_kona_gpio_set, | 
|  | .set_config = bcm_kona_gpio_set_config, | 
|  | .to_irq = bcm_kona_gpio_to_irq, | 
|  | .base = 0, | 
|  | }; | 
|  |  | 
|  | static void bcm_kona_gpio_irq_ack(struct irq_data *d) | 
|  | { | 
|  | struct bcm_kona_gpio *kona_gpio; | 
|  | void __iomem *reg_base; | 
|  | unsigned gpio = d->hwirq; | 
|  | int bank_id = GPIO_BANK(gpio); | 
|  | int bit = GPIO_BIT(gpio); | 
|  | u32 val; | 
|  | unsigned long flags; | 
|  |  | 
|  | kona_gpio = irq_data_get_irq_chip_data(d); | 
|  | reg_base = kona_gpio->reg_base; | 
|  | raw_spin_lock_irqsave(&kona_gpio->lock, flags); | 
|  |  | 
|  | val = readl(reg_base + GPIO_INT_STATUS(bank_id)); | 
|  | val |= BIT(bit); | 
|  | writel(val, reg_base + GPIO_INT_STATUS(bank_id)); | 
|  |  | 
|  | raw_spin_unlock_irqrestore(&kona_gpio->lock, flags); | 
|  | } | 
|  |  | 
|  | static void bcm_kona_gpio_irq_mask(struct irq_data *d) | 
|  | { | 
|  | struct bcm_kona_gpio *kona_gpio; | 
|  | void __iomem *reg_base; | 
|  | unsigned gpio = d->hwirq; | 
|  | int bank_id = GPIO_BANK(gpio); | 
|  | int bit = GPIO_BIT(gpio); | 
|  | u32 val; | 
|  | unsigned long flags; | 
|  |  | 
|  | kona_gpio = irq_data_get_irq_chip_data(d); | 
|  | reg_base = kona_gpio->reg_base; | 
|  | raw_spin_lock_irqsave(&kona_gpio->lock, flags); | 
|  |  | 
|  | val = readl(reg_base + GPIO_INT_MASK(bank_id)); | 
|  | val |= BIT(bit); | 
|  | writel(val, reg_base + GPIO_INT_MASK(bank_id)); | 
|  | gpiochip_disable_irq(&kona_gpio->gpio_chip, gpio); | 
|  |  | 
|  | raw_spin_unlock_irqrestore(&kona_gpio->lock, flags); | 
|  | } | 
|  |  | 
|  | static void bcm_kona_gpio_irq_unmask(struct irq_data *d) | 
|  | { | 
|  | struct bcm_kona_gpio *kona_gpio; | 
|  | void __iomem *reg_base; | 
|  | unsigned gpio = d->hwirq; | 
|  | int bank_id = GPIO_BANK(gpio); | 
|  | int bit = GPIO_BIT(gpio); | 
|  | u32 val; | 
|  | unsigned long flags; | 
|  |  | 
|  | kona_gpio = irq_data_get_irq_chip_data(d); | 
|  | reg_base = kona_gpio->reg_base; | 
|  | raw_spin_lock_irqsave(&kona_gpio->lock, flags); | 
|  |  | 
|  | val = readl(reg_base + GPIO_INT_MSKCLR(bank_id)); | 
|  | val |= BIT(bit); | 
|  | writel(val, reg_base + GPIO_INT_MSKCLR(bank_id)); | 
|  | gpiochip_enable_irq(&kona_gpio->gpio_chip, gpio); | 
|  |  | 
|  | raw_spin_unlock_irqrestore(&kona_gpio->lock, flags); | 
|  | } | 
|  |  | 
|  | static int bcm_kona_gpio_irq_set_type(struct irq_data *d, unsigned int type) | 
|  | { | 
|  | struct bcm_kona_gpio *kona_gpio; | 
|  | void __iomem *reg_base; | 
|  | unsigned gpio = d->hwirq; | 
|  | u32 lvl_type; | 
|  | u32 val; | 
|  | unsigned long flags; | 
|  |  | 
|  | kona_gpio = irq_data_get_irq_chip_data(d); | 
|  | reg_base = kona_gpio->reg_base; | 
|  | switch (type & IRQ_TYPE_SENSE_MASK) { | 
|  | case IRQ_TYPE_EDGE_RISING: | 
|  | lvl_type = GPIO_GPCTR0_ITR_CMD_RISING_EDGE; | 
|  | break; | 
|  |  | 
|  | case IRQ_TYPE_EDGE_FALLING: | 
|  | lvl_type = GPIO_GPCTR0_ITR_CMD_FALLING_EDGE; | 
|  | break; | 
|  |  | 
|  | case IRQ_TYPE_EDGE_BOTH: | 
|  | lvl_type = GPIO_GPCTR0_ITR_CMD_BOTH_EDGE; | 
|  | break; | 
|  |  | 
|  | case IRQ_TYPE_LEVEL_HIGH: | 
|  | case IRQ_TYPE_LEVEL_LOW: | 
|  | /* BCM GPIO doesn't support level triggering */ | 
|  | default: | 
|  | dev_err(kona_gpio->gpio_chip.parent, | 
|  | "Invalid BCM GPIO irq type 0x%x\n", type); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | raw_spin_lock_irqsave(&kona_gpio->lock, flags); | 
|  |  | 
|  | val = readl(reg_base + GPIO_CONTROL(gpio)); | 
|  | val &= ~GPIO_GPCTR0_ITR_MASK; | 
|  | val |= lvl_type << GPIO_GPCTR0_ITR_SHIFT; | 
|  | writel(val, reg_base + GPIO_CONTROL(gpio)); | 
|  |  | 
|  | raw_spin_unlock_irqrestore(&kona_gpio->lock, flags); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void bcm_kona_gpio_irq_handler(struct irq_desc *desc) | 
|  | { | 
|  | void __iomem *reg_base; | 
|  | int bit, bank_id; | 
|  | unsigned long sta; | 
|  | struct bcm_kona_gpio_bank *bank = irq_desc_get_handler_data(desc); | 
|  | struct irq_chip *chip = irq_desc_get_chip(desc); | 
|  |  | 
|  | chained_irq_enter(chip, desc); | 
|  |  | 
|  | /* | 
|  | * For bank interrupts, we can't use chip_data to store the kona_gpio | 
|  | * pointer, since GIC needs it for its own purposes. Therefore, we get | 
|  | * our pointer from the bank structure. | 
|  | */ | 
|  | reg_base = bank->kona_gpio->reg_base; | 
|  | bank_id = bank->id; | 
|  |  | 
|  | while ((sta = readl(reg_base + GPIO_INT_STATUS(bank_id)) & | 
|  | (~(readl(reg_base + GPIO_INT_MASK(bank_id)))))) { | 
|  | for_each_set_bit(bit, &sta, 32) { | 
|  | int hwirq = GPIO_PER_BANK * bank_id + bit; | 
|  | /* | 
|  | * Clear interrupt before handler is called so we don't | 
|  | * miss any interrupt occurred during executing them. | 
|  | */ | 
|  | writel(readl(reg_base + GPIO_INT_STATUS(bank_id)) | | 
|  | BIT(bit), reg_base + GPIO_INT_STATUS(bank_id)); | 
|  | /* Invoke interrupt handler */ | 
|  | generic_handle_domain_irq(bank->kona_gpio->irq_domain, | 
|  | hwirq); | 
|  | } | 
|  | } | 
|  |  | 
|  | chained_irq_exit(chip, desc); | 
|  | } | 
|  |  | 
|  | static int bcm_kona_gpio_irq_reqres(struct irq_data *d) | 
|  | { | 
|  | struct bcm_kona_gpio *kona_gpio = irq_data_get_irq_chip_data(d); | 
|  |  | 
|  | return gpiochip_reqres_irq(&kona_gpio->gpio_chip, d->hwirq); | 
|  | } | 
|  |  | 
|  | static void bcm_kona_gpio_irq_relres(struct irq_data *d) | 
|  | { | 
|  | struct bcm_kona_gpio *kona_gpio = irq_data_get_irq_chip_data(d); | 
|  |  | 
|  | gpiochip_relres_irq(&kona_gpio->gpio_chip, d->hwirq); | 
|  | } | 
|  |  | 
|  | static struct irq_chip bcm_gpio_irq_chip = { | 
|  | .name = "bcm-kona-gpio", | 
|  | .irq_ack = bcm_kona_gpio_irq_ack, | 
|  | .irq_mask = bcm_kona_gpio_irq_mask, | 
|  | .irq_unmask = bcm_kona_gpio_irq_unmask, | 
|  | .irq_set_type = bcm_kona_gpio_irq_set_type, | 
|  | .irq_request_resources = bcm_kona_gpio_irq_reqres, | 
|  | .irq_release_resources = bcm_kona_gpio_irq_relres, | 
|  | }; | 
|  |  | 
|  | static struct of_device_id const bcm_kona_gpio_of_match[] = { | 
|  | { .compatible = "brcm,kona-gpio" }, | 
|  | {} | 
|  | }; | 
|  |  | 
|  | /* | 
|  | * This lock class tells lockdep that GPIO irqs are in a different | 
|  | * category than their parents, so it won't report false recursion. | 
|  | */ | 
|  | static struct lock_class_key gpio_lock_class; | 
|  | static struct lock_class_key gpio_request_class; | 
|  |  | 
|  | static int bcm_kona_gpio_irq_map(struct irq_domain *d, unsigned int irq, | 
|  | irq_hw_number_t hwirq) | 
|  | { | 
|  | int ret; | 
|  |  | 
|  | ret = irq_set_chip_data(irq, d->host_data); | 
|  | if (ret < 0) | 
|  | return ret; | 
|  | irq_set_lockdep_class(irq, &gpio_lock_class, &gpio_request_class); | 
|  | irq_set_chip_and_handler(irq, &bcm_gpio_irq_chip, handle_simple_irq); | 
|  | irq_set_noprobe(irq); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void bcm_kona_gpio_irq_unmap(struct irq_domain *d, unsigned int irq) | 
|  | { | 
|  | irq_set_chip_and_handler(irq, NULL, NULL); | 
|  | irq_set_chip_data(irq, NULL); | 
|  | } | 
|  |  | 
|  | static const struct irq_domain_ops bcm_kona_irq_ops = { | 
|  | .map = bcm_kona_gpio_irq_map, | 
|  | .unmap = bcm_kona_gpio_irq_unmap, | 
|  | .xlate = irq_domain_xlate_twocell, | 
|  | }; | 
|  |  | 
|  | static void bcm_kona_gpio_reset(struct bcm_kona_gpio *kona_gpio) | 
|  | { | 
|  | void __iomem *reg_base; | 
|  | int i; | 
|  |  | 
|  | reg_base = kona_gpio->reg_base; | 
|  | /* disable interrupts and clear status */ | 
|  | for (i = 0; i < kona_gpio->num_bank; i++) { | 
|  | /* Unlock the entire bank first */ | 
|  | bcm_kona_gpio_write_lock_regs(reg_base, i, UNLOCK_CODE); | 
|  | writel(0xffffffff, reg_base + GPIO_INT_MASK(i)); | 
|  | writel(0xffffffff, reg_base + GPIO_INT_STATUS(i)); | 
|  | /* Now re-lock the bank */ | 
|  | bcm_kona_gpio_write_lock_regs(reg_base, i, LOCK_CODE); | 
|  | } | 
|  | } | 
|  |  | 
|  | static int bcm_kona_gpio_probe(struct platform_device *pdev) | 
|  | { | 
|  | struct device *dev = &pdev->dev; | 
|  | struct bcm_kona_gpio_bank *bank; | 
|  | struct bcm_kona_gpio *kona_gpio; | 
|  | struct gpio_chip *chip; | 
|  | int ret; | 
|  | int i; | 
|  |  | 
|  | kona_gpio = devm_kzalloc(dev, sizeof(*kona_gpio), GFP_KERNEL); | 
|  | if (!kona_gpio) | 
|  | return -ENOMEM; | 
|  |  | 
|  | kona_gpio->gpio_chip = template_chip; | 
|  | chip = &kona_gpio->gpio_chip; | 
|  | ret = platform_irq_count(pdev); | 
|  | if (!ret) { | 
|  | dev_err(dev, "Couldn't determine # GPIO banks\n"); | 
|  | return -ENOENT; | 
|  | } else if (ret < 0) { | 
|  | return dev_err_probe(dev, ret, "Couldn't determine GPIO banks\n"); | 
|  | } | 
|  | kona_gpio->num_bank = ret; | 
|  |  | 
|  | if (kona_gpio->num_bank > GPIO_MAX_BANK_NUM) { | 
|  | dev_err(dev, "Too many GPIO banks configured (max=%d)\n", | 
|  | GPIO_MAX_BANK_NUM); | 
|  | return -ENXIO; | 
|  | } | 
|  | kona_gpio->banks = devm_kcalloc(dev, | 
|  | kona_gpio->num_bank, | 
|  | sizeof(*kona_gpio->banks), | 
|  | GFP_KERNEL); | 
|  | if (!kona_gpio->banks) | 
|  | return -ENOMEM; | 
|  |  | 
|  | chip->parent = dev; | 
|  | chip->ngpio = kona_gpio->num_bank * GPIO_PER_BANK; | 
|  |  | 
|  | kona_gpio->irq_domain = irq_domain_create_linear(dev_fwnode(dev), | 
|  | chip->ngpio, | 
|  | &bcm_kona_irq_ops, | 
|  | kona_gpio); | 
|  | if (!kona_gpio->irq_domain) { | 
|  | dev_err(dev, "Couldn't allocate IRQ domain\n"); | 
|  | return -ENXIO; | 
|  | } | 
|  |  | 
|  | kona_gpio->reg_base = devm_platform_ioremap_resource(pdev, 0); | 
|  | if (IS_ERR(kona_gpio->reg_base)) { | 
|  | ret = PTR_ERR(kona_gpio->reg_base); | 
|  | goto err_irq_domain; | 
|  | } | 
|  |  | 
|  | for (i = 0; i < kona_gpio->num_bank; i++) { | 
|  | bank = &kona_gpio->banks[i]; | 
|  | bank->id = i; | 
|  | bank->irq = platform_get_irq(pdev, i); | 
|  | bank->kona_gpio = kona_gpio; | 
|  | if (bank->irq < 0) { | 
|  | dev_err(dev, "Couldn't get IRQ for bank %d", i); | 
|  | ret = -ENOENT; | 
|  | goto err_irq_domain; | 
|  | } | 
|  | } | 
|  |  | 
|  | dev_info(&pdev->dev, "Setting up Kona GPIO\n"); | 
|  |  | 
|  | bcm_kona_gpio_reset(kona_gpio); | 
|  |  | 
|  | ret = devm_gpiochip_add_data(dev, chip, kona_gpio); | 
|  | if (ret < 0) { | 
|  | dev_err(dev, "Couldn't add GPIO chip -- %d\n", ret); | 
|  | goto err_irq_domain; | 
|  | } | 
|  | for (i = 0; i < kona_gpio->num_bank; i++) { | 
|  | bank = &kona_gpio->banks[i]; | 
|  | irq_set_chained_handler_and_data(bank->irq, | 
|  | bcm_kona_gpio_irq_handler, | 
|  | bank); | 
|  | } | 
|  |  | 
|  | raw_spin_lock_init(&kona_gpio->lock); | 
|  |  | 
|  | return 0; | 
|  |  | 
|  | err_irq_domain: | 
|  | irq_domain_remove(kona_gpio->irq_domain); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static struct platform_driver bcm_kona_gpio_driver = { | 
|  | .driver = { | 
|  | .name = "bcm-kona-gpio", | 
|  | .of_match_table = bcm_kona_gpio_of_match, | 
|  | }, | 
|  | .probe = bcm_kona_gpio_probe, | 
|  | }; | 
|  | builtin_platform_driver(bcm_kona_gpio_driver); |