blob: 787dfd1550e5da81e325f21d6e9e78d316cb4e04 [file] [log] [blame] [edit]
// SPDX-License-Identifier: GPL-2.0
/*
* CLx support
*
* Copyright (C) 2020 - 2023, Intel Corporation
* Authors: Gil Fine <gil.fine@intel.com>
* Mika Westerberg <mika.westerberg@linux.intel.com>
*/
#include <linux/module.h>
#include "tb.h"
static bool clx_enabled = true;
module_param_named(clx, clx_enabled, bool, 0444);
MODULE_PARM_DESC(clx, "allow low power states on the high-speed lanes (default: true)");
static const char *clx_name(unsigned int clx)
{
switch (clx) {
case TB_CL0S | TB_CL1 | TB_CL2:
return "CL0s/CL1/CL2";
case TB_CL1 | TB_CL2:
return "CL1/CL2";
case TB_CL0S | TB_CL2:
return "CL0s/CL2";
case TB_CL0S | TB_CL1:
return "CL0s/CL1";
case TB_CL0S:
return "CL0s";
case 0:
return "disabled";
default:
return "unknown";
}
}
static int tb_port_pm_secondary_set(struct tb_port *port, bool secondary)
{
u32 phy;
int ret;
ret = tb_port_read(port, &phy, TB_CFG_PORT,
port->cap_phy + LANE_ADP_CS_1, 1);
if (ret)
return ret;
if (secondary)
phy |= LANE_ADP_CS_1_PMS;
else
phy &= ~LANE_ADP_CS_1_PMS;
return tb_port_write(port, &phy, TB_CFG_PORT,
port->cap_phy + LANE_ADP_CS_1, 1);
}
static int tb_port_pm_secondary_enable(struct tb_port *port)
{
return tb_port_pm_secondary_set(port, true);
}
static int tb_port_pm_secondary_disable(struct tb_port *port)
{
return tb_port_pm_secondary_set(port, false);
}
/* Called for USB4 or Titan Ridge routers only */
static bool tb_port_clx_supported(struct tb_port *port, unsigned int clx)
{
u32 val, mask = 0;
bool ret;
/* Don't enable CLx in case of two single-lane links */
if (!port->bonded && port->dual_link_port)
return false;
/* Don't enable CLx in case of inter-domain link */
if (port->xdomain)
return false;
if (tb_switch_is_usb4(port->sw)) {
if (!usb4_port_clx_supported(port))
return false;
} else if (!tb_lc_is_clx_supported(port)) {
return false;
}
if (clx & TB_CL0S)
mask |= LANE_ADP_CS_0_CL0S_SUPPORT;
if (clx & TB_CL1)
mask |= LANE_ADP_CS_0_CL1_SUPPORT;
if (clx & TB_CL2)
mask |= LANE_ADP_CS_0_CL2_SUPPORT;
ret = tb_port_read(port, &val, TB_CFG_PORT,
port->cap_phy + LANE_ADP_CS_0, 1);
if (ret)
return false;
return !!(val & mask);
}
static int tb_port_clx_set(struct tb_port *port, unsigned int clx, bool enable)
{
u32 phy, mask = 0;
int ret;
if (clx & TB_CL0S)
mask |= LANE_ADP_CS_1_CL0S_ENABLE;
if (clx & TB_CL1)
mask |= LANE_ADP_CS_1_CL1_ENABLE;
if (clx & TB_CL2)
mask |= LANE_ADP_CS_1_CL2_ENABLE;
if (!mask)
return -EOPNOTSUPP;
ret = tb_port_read(port, &phy, TB_CFG_PORT,
port->cap_phy + LANE_ADP_CS_1, 1);
if (ret)
return ret;
if (enable)
phy |= mask;
else
phy &= ~mask;
return tb_port_write(port, &phy, TB_CFG_PORT,
port->cap_phy + LANE_ADP_CS_1, 1);
}
static int tb_port_clx_disable(struct tb_port *port, unsigned int clx)
{
return tb_port_clx_set(port, clx, false);
}
static int tb_port_clx_enable(struct tb_port *port, unsigned int clx)
{
return tb_port_clx_set(port, clx, true);
}
static int tb_port_clx(struct tb_port *port)
{
u32 val;
int ret;
if (!tb_port_clx_supported(port, TB_CL0S | TB_CL1 | TB_CL2))
return 0;
ret = tb_port_read(port, &val, TB_CFG_PORT,
port->cap_phy + LANE_ADP_CS_1, 1);
if (ret)
return ret;
if (val & LANE_ADP_CS_1_CL0S_ENABLE)
ret |= TB_CL0S;
if (val & LANE_ADP_CS_1_CL1_ENABLE)
ret |= TB_CL1;
if (val & LANE_ADP_CS_1_CL2_ENABLE)
ret |= TB_CL2;
return ret;
}
/**
* tb_port_clx_is_enabled() - Is given CL state enabled
* @port: USB4 port to check
* @clx: Mask of CL states to check
*
* Returns true if any of the given CL states is enabled for @port.
*/
bool tb_port_clx_is_enabled(struct tb_port *port, unsigned int clx)
{
return !!(tb_port_clx(port) & clx);
}
/**
* tb_switch_clx_is_supported() - Is CLx supported on this type of router
* @sw: The router to check CLx support for
*/
static bool tb_switch_clx_is_supported(const struct tb_switch *sw)
{
if (!clx_enabled)
return false;
if (sw->quirks & QUIRK_NO_CLX)
return false;
/*
* CLx is not enabled and validated on Intel USB4 platforms
* before Alder Lake.
*/
if (tb_switch_is_tiger_lake(sw))
return false;
return tb_switch_is_usb4(sw) || tb_switch_is_titan_ridge(sw);
}
/**
* tb_switch_clx_init() - Initialize router CL states
* @sw: Router
*
* Can be called for any router. Initializes the current CL state by
* reading it from the hardware.
*
* Returns %0 in case of success and negative errno in case of failure.
*/
int tb_switch_clx_init(struct tb_switch *sw)
{
struct tb_port *up, *down;
unsigned int clx, tmp;
if (tb_switch_is_icm(sw))
return 0;
if (!tb_route(sw))
return 0;
if (!tb_switch_clx_is_supported(sw))
return 0;
up = tb_upstream_port(sw);
down = tb_switch_downstream_port(sw);
clx = tb_port_clx(up);
tmp = tb_port_clx(down);
if (clx != tmp)
tb_sw_warn(sw, "CLx: inconsistent configuration %#x != %#x\n",
clx, tmp);
tb_sw_dbg(sw, "CLx: current mode: %s\n", clx_name(clx));
sw->clx = clx;
return 0;
}
static int tb_switch_pm_secondary_resolve(struct tb_switch *sw)
{
struct tb_port *up, *down;
int ret;
if (!tb_route(sw))
return 0;
up = tb_upstream_port(sw);
down = tb_switch_downstream_port(sw);
ret = tb_port_pm_secondary_enable(up);
if (ret)
return ret;
return tb_port_pm_secondary_disable(down);
}
static int tb_switch_mask_clx_objections(struct tb_switch *sw)
{
int up_port = sw->config.upstream_port_number;
u32 offset, val[2], mask_obj, unmask_obj;
int ret, i;
/* Only Titan Ridge of pre-USB4 devices support CLx states */
if (!tb_switch_is_titan_ridge(sw))
return 0;
if (!tb_route(sw))
return 0;
/*
* In Titan Ridge there are only 2 dual-lane Thunderbolt ports:
* Port A consists of lane adapters 1,2 and
* Port B consists of lane adapters 3,4
* If upstream port is A, (lanes are 1,2), we mask objections from
* port B (lanes 3,4) and unmask objections from Port A and vice-versa.
*/
if (up_port == 1) {
mask_obj = TB_LOW_PWR_C0_PORT_B_MASK;
unmask_obj = TB_LOW_PWR_C1_PORT_A_MASK;
offset = TB_LOW_PWR_C1_CL1;
} else {
mask_obj = TB_LOW_PWR_C1_PORT_A_MASK;
unmask_obj = TB_LOW_PWR_C0_PORT_B_MASK;
offset = TB_LOW_PWR_C3_CL1;
}
ret = tb_sw_read(sw, &val, TB_CFG_SWITCH,
sw->cap_lp + offset, ARRAY_SIZE(val));
if (ret)
return ret;
for (i = 0; i < ARRAY_SIZE(val); i++) {
val[i] |= mask_obj;
val[i] &= ~unmask_obj;
}
return tb_sw_write(sw, &val, TB_CFG_SWITCH,
sw->cap_lp + offset, ARRAY_SIZE(val));
}
static bool validate_mask(unsigned int clx)
{
/* Previous states need to be enabled */
if (clx & TB_CL1)
return (clx & TB_CL0S) == TB_CL0S;
return true;
}
/**
* tb_switch_clx_enable() - Enable CLx on upstream port of specified router
* @sw: Router to enable CLx for
* @clx: The CLx state to enable
*
* CLx is enabled only if both sides of the link support CLx, and if both sides
* of the link are not configured as two single lane links and only if the link
* is not inter-domain link. The complete set of conditions is described in CM
* Guide 1.0 section 8.1.
*
* Returns %0 on success or an error code on failure.
*/
int tb_switch_clx_enable(struct tb_switch *sw, unsigned int clx)
{
bool up_clx_support, down_clx_support;
struct tb_switch *parent_sw;
struct tb_port *up, *down;
int ret;
if (!clx || sw->clx == clx)
return 0;
if (!validate_mask(clx))
return -EINVAL;
parent_sw = tb_switch_parent(sw);
if (!parent_sw)
return 0;
if (!tb_switch_clx_is_supported(parent_sw) ||
!tb_switch_clx_is_supported(sw))
return 0;
/* Only support CL2 for v2 routers */
if ((clx & TB_CL2) &&
(usb4_switch_version(parent_sw) < 2 ||
usb4_switch_version(sw) < 2))
return -EOPNOTSUPP;
ret = tb_switch_pm_secondary_resolve(sw);
if (ret)
return ret;
up = tb_upstream_port(sw);
down = tb_switch_downstream_port(sw);
up_clx_support = tb_port_clx_supported(up, clx);
down_clx_support = tb_port_clx_supported(down, clx);
tb_port_dbg(up, "CLx: %s %ssupported\n", clx_name(clx),
up_clx_support ? "" : "not ");
tb_port_dbg(down, "CLx: %s %ssupported\n", clx_name(clx),
down_clx_support ? "" : "not ");
if (!up_clx_support || !down_clx_support)
return -EOPNOTSUPP;
ret = tb_port_clx_enable(up, clx);
if (ret)
return ret;
ret = tb_port_clx_enable(down, clx);
if (ret) {
tb_port_clx_disable(up, clx);
return ret;
}
ret = tb_switch_mask_clx_objections(sw);
if (ret) {
tb_port_clx_disable(up, clx);
tb_port_clx_disable(down, clx);
return ret;
}
sw->clx |= clx;
tb_sw_dbg(sw, "CLx: %s enabled\n", clx_name(clx));
return 0;
}
/**
* tb_switch_clx_disable() - Disable CLx on upstream port of specified router
* @sw: Router to disable CLx for
*
* Disables all CL states of the given router. Can be called on any
* router and if the states were not enabled already does nothing.
*
* Returns the CL states that were disabled or negative errno in case of
* failure.
*/
int tb_switch_clx_disable(struct tb_switch *sw)
{
unsigned int clx = sw->clx;
struct tb_port *up, *down;
int ret;
if (!tb_switch_clx_is_supported(sw))
return 0;
if (!clx)
return 0;
if (sw->is_unplugged)
return clx;
up = tb_upstream_port(sw);
down = tb_switch_downstream_port(sw);
ret = tb_port_clx_disable(up, clx);
if (ret)
return ret;
ret = tb_port_clx_disable(down, clx);
if (ret)
return ret;
sw->clx = 0;
tb_sw_dbg(sw, "CLx: %s disabled\n", clx_name(clx));
return clx;
}