|  | /*-*-linux-c-*-*/ | 
|  |  | 
|  | /* | 
|  | Copyright (C) 2007,2008 Jonathan Woithe <jwoithe@just42.net> | 
|  | Copyright (C) 2008 Peter Gruber <nokos@gmx.net> | 
|  | Copyright (C) 2008 Tony Vroon <tony@linx.net> | 
|  | Based on earlier work: | 
|  | Copyright (C) 2003 Shane Spencer <shane@bogomip.com> | 
|  | Adrian Yee <brewt-fujitsu@brewt.org> | 
|  |  | 
|  | Templated from msi-laptop.c and thinkpad_acpi.c which is copyright | 
|  | by its respective authors. | 
|  |  | 
|  | This program is free software; you can redistribute it and/or modify | 
|  | it under the terms of the GNU General Public License as published by | 
|  | the Free Software Foundation; either version 2 of the License, or | 
|  | (at your option) any later version. | 
|  |  | 
|  | This program is distributed in the hope that it will be useful, but | 
|  | WITHOUT ANY WARRANTY; without even the implied warranty of | 
|  | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU | 
|  | General Public License for more details. | 
|  |  | 
|  | You should have received a copy of the GNU General Public License | 
|  | along with this program; if not, write to the Free Software | 
|  | Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA | 
|  | 02110-1301, USA. | 
|  | */ | 
|  |  | 
|  | /* | 
|  | * fujitsu-laptop.c - Fujitsu laptop support, providing access to additional | 
|  | * features made available on a range of Fujitsu laptops including the | 
|  | * P2xxx/P5xxx/S6xxx/S7xxx series. | 
|  | * | 
|  | * This driver implements a vendor-specific backlight control interface for | 
|  | * Fujitsu laptops and provides support for hotkeys present on certain Fujitsu | 
|  | * laptops. | 
|  | * | 
|  | * This driver has been tested on a Fujitsu Lifebook S6410, S7020 and | 
|  | * P8010.  It should work on most P-series and S-series Lifebooks, but | 
|  | * YMMV. | 
|  | * | 
|  | * The module parameter use_alt_lcd_levels switches between different ACPI | 
|  | * brightness controls which are used by different Fujitsu laptops.  In most | 
|  | * cases the correct method is automatically detected. "use_alt_lcd_levels=1" | 
|  | * is applicable for a Fujitsu Lifebook S6410 if autodetection fails. | 
|  | * | 
|  | */ | 
|  |  | 
|  | #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt | 
|  |  | 
|  | #include <linux/module.h> | 
|  | #include <linux/kernel.h> | 
|  | #include <linux/init.h> | 
|  | #include <linux/acpi.h> | 
|  | #include <linux/dmi.h> | 
|  | #include <linux/backlight.h> | 
|  | #include <linux/fb.h> | 
|  | #include <linux/input.h> | 
|  | #include <linux/input/sparse-keymap.h> | 
|  | #include <linux/kfifo.h> | 
|  | #include <linux/leds.h> | 
|  | #include <linux/platform_device.h> | 
|  | #include <linux/slab.h> | 
|  | #include <acpi/video.h> | 
|  |  | 
|  | #define FUJITSU_DRIVER_VERSION "0.6.0" | 
|  |  | 
|  | #define FUJITSU_LCD_N_LEVELS 8 | 
|  |  | 
|  | #define ACPI_FUJITSU_CLASS		"fujitsu" | 
|  | #define ACPI_FUJITSU_BL_HID		"FUJ02B1" | 
|  | #define ACPI_FUJITSU_BL_DRIVER_NAME	"Fujitsu laptop FUJ02B1 ACPI brightness driver" | 
|  | #define ACPI_FUJITSU_BL_DEVICE_NAME	"Fujitsu FUJ02B1" | 
|  | #define ACPI_FUJITSU_LAPTOP_HID		"FUJ02E3" | 
|  | #define ACPI_FUJITSU_LAPTOP_DRIVER_NAME	"Fujitsu laptop FUJ02E3 ACPI hotkeys driver" | 
|  | #define ACPI_FUJITSU_LAPTOP_DEVICE_NAME	"Fujitsu FUJ02E3" | 
|  |  | 
|  | #define ACPI_FUJITSU_NOTIFY_CODE1     0x80 | 
|  |  | 
|  | /* FUNC interface - command values */ | 
|  | #define FUNC_FLAGS	0x1000 | 
|  | #define FUNC_LEDS	0x1001 | 
|  | #define FUNC_BUTTONS	0x1002 | 
|  | #define FUNC_BACKLIGHT  0x1004 | 
|  |  | 
|  | /* FUNC interface - responses */ | 
|  | #define UNSUPPORTED_CMD 0x80000000 | 
|  |  | 
|  | /* FUNC interface - status flags */ | 
|  | #define FLAG_RFKILL	0x020 | 
|  | #define FLAG_LID	0x100 | 
|  | #define FLAG_DOCK	0x200 | 
|  |  | 
|  | /* FUNC interface - LED control */ | 
|  | #define FUNC_LED_OFF	0x1 | 
|  | #define FUNC_LED_ON	0x30001 | 
|  | #define KEYBOARD_LAMPS	0x100 | 
|  | #define LOGOLAMP_POWERON 0x2000 | 
|  | #define LOGOLAMP_ALWAYS  0x4000 | 
|  | #define RADIO_LED_ON	0x20 | 
|  | #define ECO_LED	0x10000 | 
|  | #define ECO_LED_ON	0x80000 | 
|  |  | 
|  | /* Hotkey details */ | 
|  | #define KEY1_CODE	0x410	/* codes for the keys in the GIRB register */ | 
|  | #define KEY2_CODE	0x411 | 
|  | #define KEY3_CODE	0x412 | 
|  | #define KEY4_CODE	0x413 | 
|  | #define KEY5_CODE	0x420 | 
|  |  | 
|  | #define MAX_HOTKEY_RINGBUFFER_SIZE 100 | 
|  | #define RINGBUFFERSIZE 40 | 
|  |  | 
|  | /* Device controlling the backlight and associated keys */ | 
|  | struct fujitsu_bl { | 
|  | struct input_dev *input; | 
|  | char phys[32]; | 
|  | struct backlight_device *bl_device; | 
|  | unsigned int max_brightness; | 
|  | unsigned int brightness_level; | 
|  | }; | 
|  |  | 
|  | static struct fujitsu_bl *fujitsu_bl; | 
|  | static int use_alt_lcd_levels = -1; | 
|  | static bool disable_brightness_adjust; | 
|  |  | 
|  | /* Device used to access hotkeys and other features on the laptop */ | 
|  | struct fujitsu_laptop { | 
|  | struct input_dev *input; | 
|  | char phys[32]; | 
|  | struct platform_device *pf_device; | 
|  | struct kfifo fifo; | 
|  | spinlock_t fifo_lock; | 
|  | int flags_supported; | 
|  | int flags_state; | 
|  | }; | 
|  |  | 
|  | static struct acpi_device *fext; | 
|  |  | 
|  | /* Fujitsu ACPI interface function */ | 
|  |  | 
|  | static int call_fext_func(struct acpi_device *device, | 
|  | int func, int op, int feature, int state) | 
|  | { | 
|  | union acpi_object params[4] = { | 
|  | { .integer.type = ACPI_TYPE_INTEGER, .integer.value = func }, | 
|  | { .integer.type = ACPI_TYPE_INTEGER, .integer.value = op }, | 
|  | { .integer.type = ACPI_TYPE_INTEGER, .integer.value = feature }, | 
|  | { .integer.type = ACPI_TYPE_INTEGER, .integer.value = state } | 
|  | }; | 
|  | struct acpi_object_list arg_list = { 4, params }; | 
|  | unsigned long long value; | 
|  | acpi_status status; | 
|  |  | 
|  | status = acpi_evaluate_integer(device->handle, "FUNC", &arg_list, | 
|  | &value); | 
|  | if (ACPI_FAILURE(status)) { | 
|  | acpi_handle_err(device->handle, "Failed to evaluate FUNC\n"); | 
|  | return -ENODEV; | 
|  | } | 
|  |  | 
|  | acpi_handle_debug(device->handle, | 
|  | "FUNC 0x%x (args 0x%x, 0x%x, 0x%x) returned 0x%x\n", | 
|  | func, op, feature, state, (int)value); | 
|  | return value; | 
|  | } | 
|  |  | 
|  | /* Hardware access for LCD brightness control */ | 
|  |  | 
|  | static int set_lcd_level(struct acpi_device *device, int level) | 
|  | { | 
|  | struct fujitsu_bl *priv = acpi_driver_data(device); | 
|  | acpi_status status; | 
|  | char *method; | 
|  |  | 
|  | switch (use_alt_lcd_levels) { | 
|  | case -1: | 
|  | if (acpi_has_method(device->handle, "SBL2")) | 
|  | method = "SBL2"; | 
|  | else | 
|  | method = "SBLL"; | 
|  | break; | 
|  | case 1: | 
|  | method = "SBL2"; | 
|  | break; | 
|  | default: | 
|  | method = "SBLL"; | 
|  | break; | 
|  | } | 
|  |  | 
|  | acpi_handle_debug(device->handle, "set lcd level via %s [%d]\n", method, | 
|  | level); | 
|  |  | 
|  | if (level < 0 || level >= priv->max_brightness) | 
|  | return -EINVAL; | 
|  |  | 
|  | status = acpi_execute_simple_method(device->handle, method, level); | 
|  | if (ACPI_FAILURE(status)) { | 
|  | acpi_handle_err(device->handle, "Failed to evaluate %s\n", | 
|  | method); | 
|  | return -ENODEV; | 
|  | } | 
|  |  | 
|  | priv->brightness_level = level; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int get_lcd_level(struct acpi_device *device) | 
|  | { | 
|  | struct fujitsu_bl *priv = acpi_driver_data(device); | 
|  | unsigned long long state = 0; | 
|  | acpi_status status = AE_OK; | 
|  |  | 
|  | acpi_handle_debug(device->handle, "get lcd level via GBLL\n"); | 
|  |  | 
|  | status = acpi_evaluate_integer(device->handle, "GBLL", NULL, &state); | 
|  | if (ACPI_FAILURE(status)) | 
|  | return 0; | 
|  |  | 
|  | priv->brightness_level = state & 0x0fffffff; | 
|  |  | 
|  | return priv->brightness_level; | 
|  | } | 
|  |  | 
|  | static int get_max_brightness(struct acpi_device *device) | 
|  | { | 
|  | struct fujitsu_bl *priv = acpi_driver_data(device); | 
|  | unsigned long long state = 0; | 
|  | acpi_status status = AE_OK; | 
|  |  | 
|  | acpi_handle_debug(device->handle, "get max lcd level via RBLL\n"); | 
|  |  | 
|  | status = acpi_evaluate_integer(device->handle, "RBLL", NULL, &state); | 
|  | if (ACPI_FAILURE(status)) | 
|  | return -1; | 
|  |  | 
|  | priv->max_brightness = state; | 
|  |  | 
|  | return priv->max_brightness; | 
|  | } | 
|  |  | 
|  | /* Backlight device stuff */ | 
|  |  | 
|  | static int bl_get_brightness(struct backlight_device *b) | 
|  | { | 
|  | struct acpi_device *device = bl_get_data(b); | 
|  |  | 
|  | return b->props.power == FB_BLANK_POWERDOWN ? 0 : get_lcd_level(device); | 
|  | } | 
|  |  | 
|  | static int bl_update_status(struct backlight_device *b) | 
|  | { | 
|  | struct acpi_device *device = bl_get_data(b); | 
|  |  | 
|  | if (fext) { | 
|  | if (b->props.power == FB_BLANK_POWERDOWN) | 
|  | call_fext_func(fext, FUNC_BACKLIGHT, 0x1, 0x4, 0x3); | 
|  | else | 
|  | call_fext_func(fext, FUNC_BACKLIGHT, 0x1, 0x4, 0x0); | 
|  | } | 
|  |  | 
|  | return set_lcd_level(device, b->props.brightness); | 
|  | } | 
|  |  | 
|  | static const struct backlight_ops fujitsu_bl_ops = { | 
|  | .get_brightness = bl_get_brightness, | 
|  | .update_status = bl_update_status, | 
|  | }; | 
|  |  | 
|  | static ssize_t lid_show(struct device *dev, struct device_attribute *attr, | 
|  | char *buf) | 
|  | { | 
|  | struct fujitsu_laptop *priv = dev_get_drvdata(dev); | 
|  |  | 
|  | if (!(priv->flags_supported & FLAG_LID)) | 
|  | return sprintf(buf, "unknown\n"); | 
|  | if (priv->flags_state & FLAG_LID) | 
|  | return sprintf(buf, "open\n"); | 
|  | else | 
|  | return sprintf(buf, "closed\n"); | 
|  | } | 
|  |  | 
|  | static ssize_t dock_show(struct device *dev, struct device_attribute *attr, | 
|  | char *buf) | 
|  | { | 
|  | struct fujitsu_laptop *priv = dev_get_drvdata(dev); | 
|  |  | 
|  | if (!(priv->flags_supported & FLAG_DOCK)) | 
|  | return sprintf(buf, "unknown\n"); | 
|  | if (priv->flags_state & FLAG_DOCK) | 
|  | return sprintf(buf, "docked\n"); | 
|  | else | 
|  | return sprintf(buf, "undocked\n"); | 
|  | } | 
|  |  | 
|  | static ssize_t radios_show(struct device *dev, struct device_attribute *attr, | 
|  | char *buf) | 
|  | { | 
|  | struct fujitsu_laptop *priv = dev_get_drvdata(dev); | 
|  |  | 
|  | if (!(priv->flags_supported & FLAG_RFKILL)) | 
|  | return sprintf(buf, "unknown\n"); | 
|  | if (priv->flags_state & FLAG_RFKILL) | 
|  | return sprintf(buf, "on\n"); | 
|  | else | 
|  | return sprintf(buf, "killed\n"); | 
|  | } | 
|  |  | 
|  | static DEVICE_ATTR_RO(lid); | 
|  | static DEVICE_ATTR_RO(dock); | 
|  | static DEVICE_ATTR_RO(radios); | 
|  |  | 
|  | static struct attribute *fujitsu_pf_attributes[] = { | 
|  | &dev_attr_lid.attr, | 
|  | &dev_attr_dock.attr, | 
|  | &dev_attr_radios.attr, | 
|  | NULL | 
|  | }; | 
|  |  | 
|  | static const struct attribute_group fujitsu_pf_attribute_group = { | 
|  | .attrs = fujitsu_pf_attributes | 
|  | }; | 
|  |  | 
|  | static struct platform_driver fujitsu_pf_driver = { | 
|  | .driver = { | 
|  | .name = "fujitsu-laptop", | 
|  | } | 
|  | }; | 
|  |  | 
|  | /* ACPI device for LCD brightness control */ | 
|  |  | 
|  | static const struct key_entry keymap_backlight[] = { | 
|  | { KE_KEY, true, { KEY_BRIGHTNESSUP } }, | 
|  | { KE_KEY, false, { KEY_BRIGHTNESSDOWN } }, | 
|  | { KE_END, 0 } | 
|  | }; | 
|  |  | 
|  | static int acpi_fujitsu_bl_input_setup(struct acpi_device *device) | 
|  | { | 
|  | struct fujitsu_bl *priv = acpi_driver_data(device); | 
|  | int ret; | 
|  |  | 
|  | priv->input = devm_input_allocate_device(&device->dev); | 
|  | if (!priv->input) | 
|  | return -ENOMEM; | 
|  |  | 
|  | snprintf(priv->phys, sizeof(priv->phys), "%s/video/input0", | 
|  | acpi_device_hid(device)); | 
|  |  | 
|  | priv->input->name = acpi_device_name(device); | 
|  | priv->input->phys = priv->phys; | 
|  | priv->input->id.bustype = BUS_HOST; | 
|  | priv->input->id.product = 0x06; | 
|  |  | 
|  | ret = sparse_keymap_setup(priv->input, keymap_backlight, NULL); | 
|  | if (ret) | 
|  | return ret; | 
|  |  | 
|  | return input_register_device(priv->input); | 
|  | } | 
|  |  | 
|  | static int fujitsu_backlight_register(struct acpi_device *device) | 
|  | { | 
|  | struct fujitsu_bl *priv = acpi_driver_data(device); | 
|  | const struct backlight_properties props = { | 
|  | .brightness = priv->brightness_level, | 
|  | .max_brightness = priv->max_brightness - 1, | 
|  | .type = BACKLIGHT_PLATFORM | 
|  | }; | 
|  | struct backlight_device *bd; | 
|  |  | 
|  | bd = devm_backlight_device_register(&device->dev, "fujitsu-laptop", | 
|  | &device->dev, device, | 
|  | &fujitsu_bl_ops, &props); | 
|  | if (IS_ERR(bd)) | 
|  | return PTR_ERR(bd); | 
|  |  | 
|  | priv->bl_device = bd; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int acpi_fujitsu_bl_add(struct acpi_device *device) | 
|  | { | 
|  | struct fujitsu_bl *priv; | 
|  | int error; | 
|  |  | 
|  | if (acpi_video_get_backlight_type() != acpi_backlight_vendor) | 
|  | return -ENODEV; | 
|  |  | 
|  | priv = devm_kzalloc(&device->dev, sizeof(*priv), GFP_KERNEL); | 
|  | if (!priv) | 
|  | return -ENOMEM; | 
|  |  | 
|  | fujitsu_bl = priv; | 
|  | strcpy(acpi_device_name(device), ACPI_FUJITSU_BL_DEVICE_NAME); | 
|  | strcpy(acpi_device_class(device), ACPI_FUJITSU_CLASS); | 
|  | device->driver_data = priv; | 
|  |  | 
|  | error = acpi_fujitsu_bl_input_setup(device); | 
|  | if (error) | 
|  | return error; | 
|  |  | 
|  | pr_info("ACPI: %s [%s]\n", | 
|  | acpi_device_name(device), acpi_device_bid(device)); | 
|  |  | 
|  | if (get_max_brightness(device) <= 0) | 
|  | priv->max_brightness = FUJITSU_LCD_N_LEVELS; | 
|  | get_lcd_level(device); | 
|  |  | 
|  | error = fujitsu_backlight_register(device); | 
|  | if (error) | 
|  | return error; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* Brightness notify */ | 
|  |  | 
|  | static void acpi_fujitsu_bl_notify(struct acpi_device *device, u32 event) | 
|  | { | 
|  | struct fujitsu_bl *priv = acpi_driver_data(device); | 
|  | int oldb, newb; | 
|  |  | 
|  | if (event != ACPI_FUJITSU_NOTIFY_CODE1) { | 
|  | acpi_handle_info(device->handle, "unsupported event [0x%x]\n", | 
|  | event); | 
|  | sparse_keymap_report_event(priv->input, -1, 1, true); | 
|  | return; | 
|  | } | 
|  |  | 
|  | oldb = priv->brightness_level; | 
|  | get_lcd_level(device); | 
|  | newb = priv->brightness_level; | 
|  |  | 
|  | acpi_handle_debug(device->handle, | 
|  | "brightness button event [%i -> %i]\n", oldb, newb); | 
|  |  | 
|  | if (oldb == newb) | 
|  | return; | 
|  |  | 
|  | if (!disable_brightness_adjust) | 
|  | set_lcd_level(device, newb); | 
|  |  | 
|  | sparse_keymap_report_event(priv->input, oldb < newb, 1, true); | 
|  | } | 
|  |  | 
|  | /* ACPI device for hotkey handling */ | 
|  |  | 
|  | static const struct key_entry keymap_default[] = { | 
|  | { KE_KEY, KEY1_CODE, { KEY_PROG1 } }, | 
|  | { KE_KEY, KEY2_CODE, { KEY_PROG2 } }, | 
|  | { KE_KEY, KEY3_CODE, { KEY_PROG3 } }, | 
|  | { KE_KEY, KEY4_CODE, { KEY_PROG4 } }, | 
|  | { KE_KEY, KEY5_CODE, { KEY_RFKILL } }, | 
|  | { KE_KEY, BIT(26),   { KEY_TOUCHPAD_TOGGLE } }, | 
|  | { KE_END, 0 } | 
|  | }; | 
|  |  | 
|  | static const struct key_entry keymap_s64x0[] = { | 
|  | { KE_KEY, KEY1_CODE, { KEY_SCREENLOCK } },	/* "Lock" */ | 
|  | { KE_KEY, KEY2_CODE, { KEY_HELP } },		/* "Mobility Center */ | 
|  | { KE_KEY, KEY3_CODE, { KEY_PROG3 } }, | 
|  | { KE_KEY, KEY4_CODE, { KEY_PROG4 } }, | 
|  | { KE_END, 0 } | 
|  | }; | 
|  |  | 
|  | static const struct key_entry keymap_p8010[] = { | 
|  | { KE_KEY, KEY1_CODE, { KEY_HELP } },		/* "Support" */ | 
|  | { KE_KEY, KEY2_CODE, { KEY_PROG2 } }, | 
|  | { KE_KEY, KEY3_CODE, { KEY_SWITCHVIDEOMODE } },	/* "Presentation" */ | 
|  | { KE_KEY, KEY4_CODE, { KEY_WWW } },		/* "WWW" */ | 
|  | { KE_END, 0 } | 
|  | }; | 
|  |  | 
|  | static const struct key_entry *keymap = keymap_default; | 
|  |  | 
|  | static int fujitsu_laptop_dmi_keymap_override(const struct dmi_system_id *id) | 
|  | { | 
|  | pr_info("Identified laptop model '%s'\n", id->ident); | 
|  | keymap = id->driver_data; | 
|  | return 1; | 
|  | } | 
|  |  | 
|  | static const struct dmi_system_id fujitsu_laptop_dmi_table[] = { | 
|  | { | 
|  | .callback = fujitsu_laptop_dmi_keymap_override, | 
|  | .ident = "Fujitsu Siemens S6410", | 
|  | .matches = { | 
|  | DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"), | 
|  | DMI_MATCH(DMI_PRODUCT_NAME, "LIFEBOOK S6410"), | 
|  | }, | 
|  | .driver_data = (void *)keymap_s64x0 | 
|  | }, | 
|  | { | 
|  | .callback = fujitsu_laptop_dmi_keymap_override, | 
|  | .ident = "Fujitsu Siemens S6420", | 
|  | .matches = { | 
|  | DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"), | 
|  | DMI_MATCH(DMI_PRODUCT_NAME, "LIFEBOOK S6420"), | 
|  | }, | 
|  | .driver_data = (void *)keymap_s64x0 | 
|  | }, | 
|  | { | 
|  | .callback = fujitsu_laptop_dmi_keymap_override, | 
|  | .ident = "Fujitsu LifeBook P8010", | 
|  | .matches = { | 
|  | DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU"), | 
|  | DMI_MATCH(DMI_PRODUCT_NAME, "LifeBook P8010"), | 
|  | }, | 
|  | .driver_data = (void *)keymap_p8010 | 
|  | }, | 
|  | {} | 
|  | }; | 
|  |  | 
|  | static int acpi_fujitsu_laptop_input_setup(struct acpi_device *device) | 
|  | { | 
|  | struct fujitsu_laptop *priv = acpi_driver_data(device); | 
|  | int ret; | 
|  |  | 
|  | priv->input = devm_input_allocate_device(&device->dev); | 
|  | if (!priv->input) | 
|  | return -ENOMEM; | 
|  |  | 
|  | snprintf(priv->phys, sizeof(priv->phys), "%s/input0", | 
|  | acpi_device_hid(device)); | 
|  |  | 
|  | priv->input->name = acpi_device_name(device); | 
|  | priv->input->phys = priv->phys; | 
|  | priv->input->id.bustype = BUS_HOST; | 
|  |  | 
|  | dmi_check_system(fujitsu_laptop_dmi_table); | 
|  | ret = sparse_keymap_setup(priv->input, keymap, NULL); | 
|  | if (ret) | 
|  | return ret; | 
|  |  | 
|  | return input_register_device(priv->input); | 
|  | } | 
|  |  | 
|  | static int fujitsu_laptop_platform_add(struct acpi_device *device) | 
|  | { | 
|  | struct fujitsu_laptop *priv = acpi_driver_data(device); | 
|  | int ret; | 
|  |  | 
|  | priv->pf_device = platform_device_alloc("fujitsu-laptop", -1); | 
|  | if (!priv->pf_device) | 
|  | return -ENOMEM; | 
|  |  | 
|  | platform_set_drvdata(priv->pf_device, priv); | 
|  |  | 
|  | ret = platform_device_add(priv->pf_device); | 
|  | if (ret) | 
|  | goto err_put_platform_device; | 
|  |  | 
|  | ret = sysfs_create_group(&priv->pf_device->dev.kobj, | 
|  | &fujitsu_pf_attribute_group); | 
|  | if (ret) | 
|  | goto err_del_platform_device; | 
|  |  | 
|  | return 0; | 
|  |  | 
|  | err_del_platform_device: | 
|  | platform_device_del(priv->pf_device); | 
|  | err_put_platform_device: | 
|  | platform_device_put(priv->pf_device); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static void fujitsu_laptop_platform_remove(struct acpi_device *device) | 
|  | { | 
|  | struct fujitsu_laptop *priv = acpi_driver_data(device); | 
|  |  | 
|  | sysfs_remove_group(&priv->pf_device->dev.kobj, | 
|  | &fujitsu_pf_attribute_group); | 
|  | platform_device_unregister(priv->pf_device); | 
|  | } | 
|  |  | 
|  | static int logolamp_set(struct led_classdev *cdev, | 
|  | enum led_brightness brightness) | 
|  | { | 
|  | struct acpi_device *device = to_acpi_device(cdev->dev->parent); | 
|  | int poweron = FUNC_LED_ON, always = FUNC_LED_ON; | 
|  | int ret; | 
|  |  | 
|  | if (brightness < LED_HALF) | 
|  | poweron = FUNC_LED_OFF; | 
|  |  | 
|  | if (brightness < LED_FULL) | 
|  | always = FUNC_LED_OFF; | 
|  |  | 
|  | ret = call_fext_func(device, FUNC_LEDS, 0x1, LOGOLAMP_POWERON, poweron); | 
|  | if (ret < 0) | 
|  | return ret; | 
|  |  | 
|  | return call_fext_func(device, FUNC_LEDS, 0x1, LOGOLAMP_ALWAYS, always); | 
|  | } | 
|  |  | 
|  | static enum led_brightness logolamp_get(struct led_classdev *cdev) | 
|  | { | 
|  | struct acpi_device *device = to_acpi_device(cdev->dev->parent); | 
|  | int ret; | 
|  |  | 
|  | ret = call_fext_func(device, FUNC_LEDS, 0x2, LOGOLAMP_ALWAYS, 0x0); | 
|  | if (ret == FUNC_LED_ON) | 
|  | return LED_FULL; | 
|  |  | 
|  | ret = call_fext_func(device, FUNC_LEDS, 0x2, LOGOLAMP_POWERON, 0x0); | 
|  | if (ret == FUNC_LED_ON) | 
|  | return LED_HALF; | 
|  |  | 
|  | return LED_OFF; | 
|  | } | 
|  |  | 
|  | static int kblamps_set(struct led_classdev *cdev, | 
|  | enum led_brightness brightness) | 
|  | { | 
|  | struct acpi_device *device = to_acpi_device(cdev->dev->parent); | 
|  |  | 
|  | if (brightness >= LED_FULL) | 
|  | return call_fext_func(device, FUNC_LEDS, 0x1, KEYBOARD_LAMPS, | 
|  | FUNC_LED_ON); | 
|  | else | 
|  | return call_fext_func(device, FUNC_LEDS, 0x1, KEYBOARD_LAMPS, | 
|  | FUNC_LED_OFF); | 
|  | } | 
|  |  | 
|  | static enum led_brightness kblamps_get(struct led_classdev *cdev) | 
|  | { | 
|  | struct acpi_device *device = to_acpi_device(cdev->dev->parent); | 
|  | enum led_brightness brightness = LED_OFF; | 
|  |  | 
|  | if (call_fext_func(device, | 
|  | FUNC_LEDS, 0x2, KEYBOARD_LAMPS, 0x0) == FUNC_LED_ON) | 
|  | brightness = LED_FULL; | 
|  |  | 
|  | return brightness; | 
|  | } | 
|  |  | 
|  | static int radio_led_set(struct led_classdev *cdev, | 
|  | enum led_brightness brightness) | 
|  | { | 
|  | struct acpi_device *device = to_acpi_device(cdev->dev->parent); | 
|  |  | 
|  | if (brightness >= LED_FULL) | 
|  | return call_fext_func(device, FUNC_FLAGS, 0x5, RADIO_LED_ON, | 
|  | RADIO_LED_ON); | 
|  | else | 
|  | return call_fext_func(device, FUNC_FLAGS, 0x5, RADIO_LED_ON, | 
|  | 0x0); | 
|  | } | 
|  |  | 
|  | static enum led_brightness radio_led_get(struct led_classdev *cdev) | 
|  | { | 
|  | struct acpi_device *device = to_acpi_device(cdev->dev->parent); | 
|  | enum led_brightness brightness = LED_OFF; | 
|  |  | 
|  | if (call_fext_func(device, FUNC_FLAGS, 0x4, 0x0, 0x0) & RADIO_LED_ON) | 
|  | brightness = LED_FULL; | 
|  |  | 
|  | return brightness; | 
|  | } | 
|  |  | 
|  | static int eco_led_set(struct led_classdev *cdev, | 
|  | enum led_brightness brightness) | 
|  | { | 
|  | struct acpi_device *device = to_acpi_device(cdev->dev->parent); | 
|  | int curr; | 
|  |  | 
|  | curr = call_fext_func(device, FUNC_LEDS, 0x2, ECO_LED, 0x0); | 
|  | if (brightness >= LED_FULL) | 
|  | return call_fext_func(device, FUNC_LEDS, 0x1, ECO_LED, | 
|  | curr | ECO_LED_ON); | 
|  | else | 
|  | return call_fext_func(device, FUNC_LEDS, 0x1, ECO_LED, | 
|  | curr & ~ECO_LED_ON); | 
|  | } | 
|  |  | 
|  | static enum led_brightness eco_led_get(struct led_classdev *cdev) | 
|  | { | 
|  | struct acpi_device *device = to_acpi_device(cdev->dev->parent); | 
|  | enum led_brightness brightness = LED_OFF; | 
|  |  | 
|  | if (call_fext_func(device, FUNC_LEDS, 0x2, ECO_LED, 0x0) & ECO_LED_ON) | 
|  | brightness = LED_FULL; | 
|  |  | 
|  | return brightness; | 
|  | } | 
|  |  | 
|  | static int acpi_fujitsu_laptop_leds_register(struct acpi_device *device) | 
|  | { | 
|  | struct led_classdev *led; | 
|  | int result; | 
|  |  | 
|  | if (call_fext_func(device, | 
|  | FUNC_LEDS, 0x0, 0x0, 0x0) & LOGOLAMP_POWERON) { | 
|  | led = devm_kzalloc(&device->dev, sizeof(*led), GFP_KERNEL); | 
|  | if (!led) | 
|  | return -ENOMEM; | 
|  |  | 
|  | led->name = "fujitsu::logolamp"; | 
|  | led->brightness_set_blocking = logolamp_set; | 
|  | led->brightness_get = logolamp_get; | 
|  | result = devm_led_classdev_register(&device->dev, led); | 
|  | if (result) | 
|  | return result; | 
|  | } | 
|  |  | 
|  | if ((call_fext_func(device, | 
|  | FUNC_LEDS, 0x0, 0x0, 0x0) & KEYBOARD_LAMPS) && | 
|  | (call_fext_func(device, FUNC_BUTTONS, 0x0, 0x0, 0x0) == 0x0)) { | 
|  | led = devm_kzalloc(&device->dev, sizeof(*led), GFP_KERNEL); | 
|  | if (!led) | 
|  | return -ENOMEM; | 
|  |  | 
|  | led->name = "fujitsu::kblamps"; | 
|  | led->brightness_set_blocking = kblamps_set; | 
|  | led->brightness_get = kblamps_get; | 
|  | result = devm_led_classdev_register(&device->dev, led); | 
|  | if (result) | 
|  | return result; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * BTNI bit 24 seems to indicate the presence of a radio toggle | 
|  | * button in place of a slide switch, and all such machines appear | 
|  | * to also have an RF LED.  Therefore use bit 24 as an indicator | 
|  | * that an RF LED is present. | 
|  | */ | 
|  | if (call_fext_func(device, FUNC_BUTTONS, 0x0, 0x0, 0x0) & BIT(24)) { | 
|  | led = devm_kzalloc(&device->dev, sizeof(*led), GFP_KERNEL); | 
|  | if (!led) | 
|  | return -ENOMEM; | 
|  |  | 
|  | led->name = "fujitsu::radio_led"; | 
|  | led->brightness_set_blocking = radio_led_set; | 
|  | led->brightness_get = radio_led_get; | 
|  | led->default_trigger = "rfkill-any"; | 
|  | result = devm_led_classdev_register(&device->dev, led); | 
|  | if (result) | 
|  | return result; | 
|  | } | 
|  |  | 
|  | /* Support for eco led is not always signaled in bit corresponding | 
|  | * to the bit used to control the led. According to the DSDT table, | 
|  | * bit 14 seems to indicate presence of said led as well. | 
|  | * Confirm by testing the status. | 
|  | */ | 
|  | if ((call_fext_func(device, FUNC_LEDS, 0x0, 0x0, 0x0) & BIT(14)) && | 
|  | (call_fext_func(device, | 
|  | FUNC_LEDS, 0x2, ECO_LED, 0x0) != UNSUPPORTED_CMD)) { | 
|  | led = devm_kzalloc(&device->dev, sizeof(*led), GFP_KERNEL); | 
|  | if (!led) | 
|  | return -ENOMEM; | 
|  |  | 
|  | led->name = "fujitsu::eco_led"; | 
|  | led->brightness_set_blocking = eco_led_set; | 
|  | led->brightness_get = eco_led_get; | 
|  | result = devm_led_classdev_register(&device->dev, led); | 
|  | if (result) | 
|  | return result; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int acpi_fujitsu_laptop_add(struct acpi_device *device) | 
|  | { | 
|  | struct fujitsu_laptop *priv; | 
|  | int error; | 
|  | int i; | 
|  |  | 
|  | priv = devm_kzalloc(&device->dev, sizeof(*priv), GFP_KERNEL); | 
|  | if (!priv) | 
|  | return -ENOMEM; | 
|  |  | 
|  | WARN_ONCE(fext, "More than one FUJ02E3 ACPI device was found.  Driver may not work as intended."); | 
|  | fext = device; | 
|  |  | 
|  | strcpy(acpi_device_name(device), ACPI_FUJITSU_LAPTOP_DEVICE_NAME); | 
|  | strcpy(acpi_device_class(device), ACPI_FUJITSU_CLASS); | 
|  | device->driver_data = priv; | 
|  |  | 
|  | /* kfifo */ | 
|  | spin_lock_init(&priv->fifo_lock); | 
|  | error = kfifo_alloc(&priv->fifo, RINGBUFFERSIZE * sizeof(int), | 
|  | GFP_KERNEL); | 
|  | if (error) { | 
|  | pr_err("kfifo_alloc failed\n"); | 
|  | goto err_stop; | 
|  | } | 
|  |  | 
|  | error = acpi_fujitsu_laptop_input_setup(device); | 
|  | if (error) | 
|  | goto err_free_fifo; | 
|  |  | 
|  | pr_info("ACPI: %s [%s]\n", | 
|  | acpi_device_name(device), acpi_device_bid(device)); | 
|  |  | 
|  | i = 0; | 
|  | while (call_fext_func(device, FUNC_BUTTONS, 0x1, 0x0, 0x0) != 0 | 
|  | && (i++) < MAX_HOTKEY_RINGBUFFER_SIZE) | 
|  | ; /* No action, result is discarded */ | 
|  | acpi_handle_debug(device->handle, "Discarded %i ringbuffer entries\n", | 
|  | i); | 
|  |  | 
|  | priv->flags_supported = call_fext_func(device, FUNC_FLAGS, 0x0, 0x0, | 
|  | 0x0); | 
|  |  | 
|  | /* Make sure our bitmask of supported functions is cleared if the | 
|  | RFKILL function block is not implemented, like on the S7020. */ | 
|  | if (priv->flags_supported == UNSUPPORTED_CMD) | 
|  | priv->flags_supported = 0; | 
|  |  | 
|  | if (priv->flags_supported) | 
|  | priv->flags_state = call_fext_func(device, FUNC_FLAGS, 0x4, 0x0, | 
|  | 0x0); | 
|  |  | 
|  | /* Suspect this is a keymap of the application panel, print it */ | 
|  | acpi_handle_info(device->handle, "BTNI: [0x%x]\n", | 
|  | call_fext_func(device, FUNC_BUTTONS, 0x0, 0x0, 0x0)); | 
|  |  | 
|  | /* Sync backlight power status */ | 
|  | if (fujitsu_bl && fujitsu_bl->bl_device && | 
|  | acpi_video_get_backlight_type() == acpi_backlight_vendor) { | 
|  | if (call_fext_func(fext, FUNC_BACKLIGHT, 0x2, 0x4, 0x0) == 3) | 
|  | fujitsu_bl->bl_device->props.power = FB_BLANK_POWERDOWN; | 
|  | else | 
|  | fujitsu_bl->bl_device->props.power = FB_BLANK_UNBLANK; | 
|  | } | 
|  |  | 
|  | error = acpi_fujitsu_laptop_leds_register(device); | 
|  | if (error) | 
|  | goto err_free_fifo; | 
|  |  | 
|  | error = fujitsu_laptop_platform_add(device); | 
|  | if (error) | 
|  | goto err_free_fifo; | 
|  |  | 
|  | return 0; | 
|  |  | 
|  | err_free_fifo: | 
|  | kfifo_free(&priv->fifo); | 
|  | err_stop: | 
|  | return error; | 
|  | } | 
|  |  | 
|  | static int acpi_fujitsu_laptop_remove(struct acpi_device *device) | 
|  | { | 
|  | struct fujitsu_laptop *priv = acpi_driver_data(device); | 
|  |  | 
|  | fujitsu_laptop_platform_remove(device); | 
|  |  | 
|  | kfifo_free(&priv->fifo); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void acpi_fujitsu_laptop_press(struct acpi_device *device, int scancode) | 
|  | { | 
|  | struct fujitsu_laptop *priv = acpi_driver_data(device); | 
|  | int status; | 
|  |  | 
|  | status = kfifo_in_locked(&priv->fifo, (unsigned char *)&scancode, | 
|  | sizeof(scancode), &priv->fifo_lock); | 
|  | if (status != sizeof(scancode)) { | 
|  | dev_info(&priv->input->dev, "Could not push scancode [0x%x]\n", | 
|  | scancode); | 
|  | return; | 
|  | } | 
|  | sparse_keymap_report_event(priv->input, scancode, 1, false); | 
|  | dev_dbg(&priv->input->dev, "Push scancode into ringbuffer [0x%x]\n", | 
|  | scancode); | 
|  | } | 
|  |  | 
|  | static void acpi_fujitsu_laptop_release(struct acpi_device *device) | 
|  | { | 
|  | struct fujitsu_laptop *priv = acpi_driver_data(device); | 
|  | int scancode, status; | 
|  |  | 
|  | while (true) { | 
|  | status = kfifo_out_locked(&priv->fifo, | 
|  | (unsigned char *)&scancode, | 
|  | sizeof(scancode), &priv->fifo_lock); | 
|  | if (status != sizeof(scancode)) | 
|  | return; | 
|  | sparse_keymap_report_event(priv->input, scancode, 0, false); | 
|  | dev_dbg(&priv->input->dev, | 
|  | "Pop scancode from ringbuffer [0x%x]\n", scancode); | 
|  | } | 
|  | } | 
|  |  | 
|  | static void acpi_fujitsu_laptop_notify(struct acpi_device *device, u32 event) | 
|  | { | 
|  | struct fujitsu_laptop *priv = acpi_driver_data(device); | 
|  | int scancode, i = 0; | 
|  | unsigned int irb; | 
|  |  | 
|  | if (event != ACPI_FUJITSU_NOTIFY_CODE1) { | 
|  | acpi_handle_info(device->handle, "Unsupported event [0x%x]\n", | 
|  | event); | 
|  | sparse_keymap_report_event(priv->input, -1, 1, true); | 
|  | return; | 
|  | } | 
|  |  | 
|  | if (priv->flags_supported) | 
|  | priv->flags_state = call_fext_func(device, FUNC_FLAGS, 0x4, 0x0, | 
|  | 0x0); | 
|  |  | 
|  | while ((irb = call_fext_func(device, | 
|  | FUNC_BUTTONS, 0x1, 0x0, 0x0)) != 0 && | 
|  | i++ < MAX_HOTKEY_RINGBUFFER_SIZE) { | 
|  | scancode = irb & 0x4ff; | 
|  | if (sparse_keymap_entry_from_scancode(priv->input, scancode)) | 
|  | acpi_fujitsu_laptop_press(device, scancode); | 
|  | else if (scancode == 0) | 
|  | acpi_fujitsu_laptop_release(device); | 
|  | else | 
|  | acpi_handle_info(device->handle, | 
|  | "Unknown GIRB result [%x]\n", irb); | 
|  | } | 
|  |  | 
|  | /* On some models (first seen on the Skylake-based Lifebook | 
|  | * E736/E746/E756), the touchpad toggle hotkey (Fn+F4) is | 
|  | * handled in software; its state is queried using FUNC_FLAGS | 
|  | */ | 
|  | if ((priv->flags_supported & BIT(26)) && | 
|  | (call_fext_func(device, FUNC_FLAGS, 0x1, 0x0, 0x0) & BIT(26))) | 
|  | sparse_keymap_report_event(priv->input, BIT(26), 1, true); | 
|  | } | 
|  |  | 
|  | /* Initialization */ | 
|  |  | 
|  | static const struct acpi_device_id fujitsu_bl_device_ids[] = { | 
|  | {ACPI_FUJITSU_BL_HID, 0}, | 
|  | {"", 0}, | 
|  | }; | 
|  |  | 
|  | static struct acpi_driver acpi_fujitsu_bl_driver = { | 
|  | .name = ACPI_FUJITSU_BL_DRIVER_NAME, | 
|  | .class = ACPI_FUJITSU_CLASS, | 
|  | .ids = fujitsu_bl_device_ids, | 
|  | .ops = { | 
|  | .add = acpi_fujitsu_bl_add, | 
|  | .notify = acpi_fujitsu_bl_notify, | 
|  | }, | 
|  | }; | 
|  |  | 
|  | static const struct acpi_device_id fujitsu_laptop_device_ids[] = { | 
|  | {ACPI_FUJITSU_LAPTOP_HID, 0}, | 
|  | {"", 0}, | 
|  | }; | 
|  |  | 
|  | static struct acpi_driver acpi_fujitsu_laptop_driver = { | 
|  | .name = ACPI_FUJITSU_LAPTOP_DRIVER_NAME, | 
|  | .class = ACPI_FUJITSU_CLASS, | 
|  | .ids = fujitsu_laptop_device_ids, | 
|  | .ops = { | 
|  | .add = acpi_fujitsu_laptop_add, | 
|  | .remove = acpi_fujitsu_laptop_remove, | 
|  | .notify = acpi_fujitsu_laptop_notify, | 
|  | }, | 
|  | }; | 
|  |  | 
|  | static const struct acpi_device_id fujitsu_ids[] __used = { | 
|  | {ACPI_FUJITSU_BL_HID, 0}, | 
|  | {ACPI_FUJITSU_LAPTOP_HID, 0}, | 
|  | {"", 0} | 
|  | }; | 
|  | MODULE_DEVICE_TABLE(acpi, fujitsu_ids); | 
|  |  | 
|  | static int __init fujitsu_init(void) | 
|  | { | 
|  | int ret; | 
|  |  | 
|  | ret = acpi_bus_register_driver(&acpi_fujitsu_bl_driver); | 
|  | if (ret) | 
|  | return ret; | 
|  |  | 
|  | /* Register platform stuff */ | 
|  |  | 
|  | ret = platform_driver_register(&fujitsu_pf_driver); | 
|  | if (ret) | 
|  | goto err_unregister_acpi; | 
|  |  | 
|  | /* Register laptop driver */ | 
|  |  | 
|  | ret = acpi_bus_register_driver(&acpi_fujitsu_laptop_driver); | 
|  | if (ret) | 
|  | goto err_unregister_platform_driver; | 
|  |  | 
|  | pr_info("driver " FUJITSU_DRIVER_VERSION " successfully loaded\n"); | 
|  |  | 
|  | return 0; | 
|  |  | 
|  | err_unregister_platform_driver: | 
|  | platform_driver_unregister(&fujitsu_pf_driver); | 
|  | err_unregister_acpi: | 
|  | acpi_bus_unregister_driver(&acpi_fujitsu_bl_driver); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static void __exit fujitsu_cleanup(void) | 
|  | { | 
|  | acpi_bus_unregister_driver(&acpi_fujitsu_laptop_driver); | 
|  |  | 
|  | platform_driver_unregister(&fujitsu_pf_driver); | 
|  |  | 
|  | acpi_bus_unregister_driver(&acpi_fujitsu_bl_driver); | 
|  |  | 
|  | pr_info("driver unloaded\n"); | 
|  | } | 
|  |  | 
|  | module_init(fujitsu_init); | 
|  | module_exit(fujitsu_cleanup); | 
|  |  | 
|  | module_param(use_alt_lcd_levels, int, 0644); | 
|  | MODULE_PARM_DESC(use_alt_lcd_levels, "Interface used for setting LCD brightness level (-1 = auto, 0 = force SBLL, 1 = force SBL2)"); | 
|  | module_param(disable_brightness_adjust, bool, 0644); | 
|  | MODULE_PARM_DESC(disable_brightness_adjust, "Disable LCD brightness adjustment"); | 
|  |  | 
|  | MODULE_AUTHOR("Jonathan Woithe, Peter Gruber, Tony Vroon"); | 
|  | MODULE_DESCRIPTION("Fujitsu laptop extras support"); | 
|  | MODULE_VERSION(FUJITSU_DRIVER_VERSION); | 
|  | MODULE_LICENSE("GPL"); |