|  | // SPDX-License-Identifier: GPL-2.0-or-later | 
|  | /* | 
|  | * IBM OPAL I2C driver | 
|  | * Copyright (C) 2014 IBM | 
|  | */ | 
|  |  | 
|  | #include <linux/device.h> | 
|  | #include <linux/i2c.h> | 
|  | #include <linux/kernel.h> | 
|  | #include <linux/mm.h> | 
|  | #include <linux/module.h> | 
|  | #include <linux/of.h> | 
|  | #include <linux/platform_device.h> | 
|  | #include <linux/slab.h> | 
|  |  | 
|  | #include <asm/firmware.h> | 
|  | #include <asm/opal.h> | 
|  |  | 
|  | static int i2c_opal_translate_error(int rc) | 
|  | { | 
|  | switch (rc) { | 
|  | case OPAL_NO_MEM: | 
|  | return -ENOMEM; | 
|  | case OPAL_PARAMETER: | 
|  | return -EINVAL; | 
|  | case OPAL_I2C_ARBT_LOST: | 
|  | return -EAGAIN; | 
|  | case OPAL_I2C_TIMEOUT: | 
|  | return -ETIMEDOUT; | 
|  | case OPAL_I2C_NACK_RCVD: | 
|  | return -ENXIO; | 
|  | case OPAL_I2C_STOP_ERR: | 
|  | return -EBUSY; | 
|  | default: | 
|  | return -EIO; | 
|  | } | 
|  | } | 
|  |  | 
|  | static int i2c_opal_send_request(u32 bus_id, struct opal_i2c_request *req) | 
|  | { | 
|  | struct opal_msg msg; | 
|  | int token, rc; | 
|  |  | 
|  | token = opal_async_get_token_interruptible(); | 
|  | if (token < 0) { | 
|  | if (token != -ERESTARTSYS) | 
|  | pr_err("Failed to get the async token\n"); | 
|  |  | 
|  | return token; | 
|  | } | 
|  |  | 
|  | rc = opal_i2c_request(token, bus_id, req); | 
|  | if (rc != OPAL_ASYNC_COMPLETION) { | 
|  | rc = i2c_opal_translate_error(rc); | 
|  | goto exit; | 
|  | } | 
|  |  | 
|  | rc = opal_async_wait_response(token, &msg); | 
|  | if (rc) | 
|  | goto exit; | 
|  |  | 
|  | rc = opal_get_async_rc(msg); | 
|  | if (rc != OPAL_SUCCESS) { | 
|  | rc = i2c_opal_translate_error(rc); | 
|  | goto exit; | 
|  | } | 
|  |  | 
|  | exit: | 
|  | opal_async_release_token(token); | 
|  | return rc; | 
|  | } | 
|  |  | 
|  | static int i2c_opal_master_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, | 
|  | int num) | 
|  | { | 
|  | unsigned long opal_id = (unsigned long)adap->algo_data; | 
|  | struct opal_i2c_request req; | 
|  | int rc, i; | 
|  |  | 
|  | /* We only support fairly simple combinations here of one | 
|  | * or two messages | 
|  | */ | 
|  | memset(&req, 0, sizeof(req)); | 
|  | switch(num) { | 
|  | case 1: | 
|  | req.type = (msgs[0].flags & I2C_M_RD) ? | 
|  | OPAL_I2C_RAW_READ : OPAL_I2C_RAW_WRITE; | 
|  | req.addr = cpu_to_be16(msgs[0].addr); | 
|  | req.size = cpu_to_be32(msgs[0].len); | 
|  | req.buffer_ra = cpu_to_be64(__pa(msgs[0].buf)); | 
|  | break; | 
|  | case 2: | 
|  | req.type = (msgs[1].flags & I2C_M_RD) ? | 
|  | OPAL_I2C_SM_READ : OPAL_I2C_SM_WRITE; | 
|  | req.addr = cpu_to_be16(msgs[0].addr); | 
|  | req.subaddr_sz = msgs[0].len; | 
|  | for (i = 0; i < msgs[0].len; i++) | 
|  | req.subaddr = (req.subaddr << 8) | msgs[0].buf[i]; | 
|  | req.subaddr = cpu_to_be32(req.subaddr); | 
|  | req.size = cpu_to_be32(msgs[1].len); | 
|  | req.buffer_ra = cpu_to_be64(__pa(msgs[1].buf)); | 
|  | break; | 
|  | } | 
|  |  | 
|  | rc = i2c_opal_send_request(opal_id, &req); | 
|  | if (rc) | 
|  | return rc; | 
|  |  | 
|  | return num; | 
|  | } | 
|  |  | 
|  | static int i2c_opal_smbus_xfer(struct i2c_adapter *adap, u16 addr, | 
|  | unsigned short flags, char read_write, | 
|  | u8 command, int size, union i2c_smbus_data *data) | 
|  | { | 
|  | unsigned long opal_id = (unsigned long)adap->algo_data; | 
|  | struct opal_i2c_request req; | 
|  | u8 local[2]; | 
|  | int rc; | 
|  |  | 
|  | memset(&req, 0, sizeof(req)); | 
|  |  | 
|  | req.addr = cpu_to_be16(addr); | 
|  | switch (size) { | 
|  | case I2C_SMBUS_BYTE: | 
|  | req.buffer_ra = cpu_to_be64(__pa(&data->byte)); | 
|  | req.size = cpu_to_be32(1); | 
|  | /* Fall through */ | 
|  | case I2C_SMBUS_QUICK: | 
|  | req.type = (read_write == I2C_SMBUS_READ) ? | 
|  | OPAL_I2C_RAW_READ : OPAL_I2C_RAW_WRITE; | 
|  | break; | 
|  | case I2C_SMBUS_BYTE_DATA: | 
|  | req.buffer_ra = cpu_to_be64(__pa(&data->byte)); | 
|  | req.size = cpu_to_be32(1); | 
|  | req.subaddr = cpu_to_be32(command); | 
|  | req.subaddr_sz = 1; | 
|  | req.type = (read_write == I2C_SMBUS_READ) ? | 
|  | OPAL_I2C_SM_READ : OPAL_I2C_SM_WRITE; | 
|  | break; | 
|  | case I2C_SMBUS_WORD_DATA: | 
|  | if (!read_write) { | 
|  | local[0] = data->word & 0xff; | 
|  | local[1] = (data->word >> 8) & 0xff; | 
|  | } | 
|  | req.buffer_ra = cpu_to_be64(__pa(local)); | 
|  | req.size = cpu_to_be32(2); | 
|  | req.subaddr = cpu_to_be32(command); | 
|  | req.subaddr_sz = 1; | 
|  | req.type = (read_write == I2C_SMBUS_READ) ? | 
|  | OPAL_I2C_SM_READ : OPAL_I2C_SM_WRITE; | 
|  | break; | 
|  | case I2C_SMBUS_I2C_BLOCK_DATA: | 
|  | req.buffer_ra = cpu_to_be64(__pa(&data->block[1])); | 
|  | req.size = cpu_to_be32(data->block[0]); | 
|  | req.subaddr = cpu_to_be32(command); | 
|  | req.subaddr_sz = 1; | 
|  | req.type = (read_write == I2C_SMBUS_READ) ? | 
|  | OPAL_I2C_SM_READ : OPAL_I2C_SM_WRITE; | 
|  | break; | 
|  | default: | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | rc = i2c_opal_send_request(opal_id, &req); | 
|  | if (!rc && read_write && size == I2C_SMBUS_WORD_DATA) { | 
|  | data->word = ((u16)local[1]) << 8; | 
|  | data->word |= local[0]; | 
|  | } | 
|  |  | 
|  | return rc; | 
|  | } | 
|  |  | 
|  | static u32 i2c_opal_func(struct i2c_adapter *adapter) | 
|  | { | 
|  | return I2C_FUNC_I2C | I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE | | 
|  | I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA | | 
|  | I2C_FUNC_SMBUS_I2C_BLOCK; | 
|  | } | 
|  |  | 
|  | static const struct i2c_algorithm i2c_opal_algo = { | 
|  | .master_xfer	= i2c_opal_master_xfer, | 
|  | .smbus_xfer	= i2c_opal_smbus_xfer, | 
|  | .functionality	= i2c_opal_func, | 
|  | }; | 
|  |  | 
|  | /* | 
|  | * For two messages, we basically support simple smbus transactions of a | 
|  | * write-then-anything. | 
|  | */ | 
|  | static const struct i2c_adapter_quirks i2c_opal_quirks = { | 
|  | .flags = I2C_AQ_COMB | I2C_AQ_COMB_WRITE_FIRST | I2C_AQ_COMB_SAME_ADDR, | 
|  | .max_comb_1st_msg_len = 4, | 
|  | }; | 
|  |  | 
|  | static int i2c_opal_probe(struct platform_device *pdev) | 
|  | { | 
|  | struct i2c_adapter	*adapter; | 
|  | const char		*pname; | 
|  | u32			opal_id; | 
|  | int			rc; | 
|  |  | 
|  | if (!pdev->dev.of_node) | 
|  | return -ENODEV; | 
|  |  | 
|  | rc = of_property_read_u32(pdev->dev.of_node, "ibm,opal-id", &opal_id); | 
|  | if (rc) { | 
|  | dev_err(&pdev->dev, "Missing ibm,opal-id property !\n"); | 
|  | return -EIO; | 
|  | } | 
|  |  | 
|  | adapter = devm_kzalloc(&pdev->dev, sizeof(*adapter), GFP_KERNEL); | 
|  | if (!adapter) | 
|  | return -ENOMEM; | 
|  |  | 
|  | adapter->algo = &i2c_opal_algo; | 
|  | adapter->algo_data = (void *)(unsigned long)opal_id; | 
|  | adapter->quirks = &i2c_opal_quirks; | 
|  | adapter->dev.parent = &pdev->dev; | 
|  | adapter->dev.of_node = of_node_get(pdev->dev.of_node); | 
|  | pname = of_get_property(pdev->dev.of_node, "ibm,port-name", NULL); | 
|  | if (pname) | 
|  | strlcpy(adapter->name, pname, sizeof(adapter->name)); | 
|  | else | 
|  | strlcpy(adapter->name, "opal", sizeof(adapter->name)); | 
|  |  | 
|  | platform_set_drvdata(pdev, adapter); | 
|  | rc = i2c_add_adapter(adapter); | 
|  | if (rc) | 
|  | dev_err(&pdev->dev, "Failed to register the i2c adapter\n"); | 
|  |  | 
|  | return rc; | 
|  | } | 
|  |  | 
|  | static int i2c_opal_remove(struct platform_device *pdev) | 
|  | { | 
|  | struct i2c_adapter *adapter = platform_get_drvdata(pdev); | 
|  |  | 
|  | i2c_del_adapter(adapter); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static const struct of_device_id i2c_opal_of_match[] = { | 
|  | { | 
|  | .compatible = "ibm,opal-i2c", | 
|  | }, | 
|  | { } | 
|  | }; | 
|  | MODULE_DEVICE_TABLE(of, i2c_opal_of_match); | 
|  |  | 
|  | static struct platform_driver i2c_opal_driver = { | 
|  | .probe	= i2c_opal_probe, | 
|  | .remove	= i2c_opal_remove, | 
|  | .driver	= { | 
|  | .name		= "i2c-opal", | 
|  | .of_match_table	= i2c_opal_of_match, | 
|  | }, | 
|  | }; | 
|  |  | 
|  | static int __init i2c_opal_init(void) | 
|  | { | 
|  | if (!firmware_has_feature(FW_FEATURE_OPAL)) | 
|  | return -ENODEV; | 
|  |  | 
|  | return platform_driver_register(&i2c_opal_driver); | 
|  | } | 
|  | module_init(i2c_opal_init); | 
|  |  | 
|  | static void __exit i2c_opal_exit(void) | 
|  | { | 
|  | return platform_driver_unregister(&i2c_opal_driver); | 
|  | } | 
|  | module_exit(i2c_opal_exit); | 
|  |  | 
|  | MODULE_AUTHOR("Neelesh Gupta <neelegup@linux.vnet.ibm.com>"); | 
|  | MODULE_DESCRIPTION("IBM OPAL I2C driver"); | 
|  | MODULE_LICENSE("GPL"); |