blob: 08a5cfeaa59ea47aa1bfc5ca193a71ce49f579e3 [file] [log] [blame]
/*
* linux/drivers/media/video/s5p-mfc/s5p_mfc_ctrl.c
*
* Copyright (c) 2010 Samsung Electronics Co., Ltd.
* http://www.samsung.com/
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*/
#include <linux/delay.h>
#include <linux/err.h>
#include <linux/firmware.h>
#include <linux/jiffies.h>
#include <linux/sched.h>
#include "regs-mfc.h"
#include "s5p_mfc_cmd.h"
#include "s5p_mfc_common.h"
#include "s5p_mfc_debug.h"
#include "s5p_mfc_intr.h"
#include "s5p_mfc_pm.h"
static void *s5p_mfc_bitproc_buf;
static size_t s5p_mfc_bitproc_phys;
static unsigned char *s5p_mfc_bitproc_virt;
/* Allocate and load firmware */
int s5p_mfc_alloc_and_load_firmware(struct s5p_mfc_dev *dev)
{
struct firmware *fw_blob;
size_t bank2_base_phys;
void *b_base;
int err;
/* Firmare has to be present as a separate file or compiled
* into kernel. */
mfc_debug_enter();
err = request_firmware((const struct firmware **)&fw_blob,
"s5p-mfc.fw", dev->v4l2_dev.dev);
if (err != 0) {
mfc_err("Firmware is not present in the /lib/firmware directory nor compiled in kernel\n");
return -EINVAL;
}
dev->fw_size = ALIGN(fw_blob->size, FIRMWARE_ALIGN);
if (s5p_mfc_bitproc_buf) {
mfc_err("Attempting to allocate firmware when it seems that it is already loaded\n");
release_firmware(fw_blob);
return -ENOMEM;
}
s5p_mfc_bitproc_buf = vb2_dma_contig_memops.alloc(
dev->alloc_ctx[MFC_BANK1_ALLOC_CTX], dev->fw_size);
if (IS_ERR(s5p_mfc_bitproc_buf)) {
s5p_mfc_bitproc_buf = NULL;
mfc_err("Allocating bitprocessor buffer failed\n");
release_firmware(fw_blob);
return -ENOMEM;
}
s5p_mfc_bitproc_phys = s5p_mfc_mem_cookie(
dev->alloc_ctx[MFC_BANK1_ALLOC_CTX], s5p_mfc_bitproc_buf);
if (s5p_mfc_bitproc_phys & ((1 << MFC_BASE_ALIGN_ORDER) - 1)) {
mfc_err("The base memory for bank 1 is not aligned to 128KB\n");
vb2_dma_contig_memops.put(s5p_mfc_bitproc_buf);
s5p_mfc_bitproc_phys = 0;
s5p_mfc_bitproc_buf = NULL;
release_firmware(fw_blob);
return -EIO;
}
s5p_mfc_bitproc_virt = vb2_dma_contig_memops.vaddr(s5p_mfc_bitproc_buf);
if (!s5p_mfc_bitproc_virt) {
mfc_err("Bitprocessor memory remap failed\n");
vb2_dma_contig_memops.put(s5p_mfc_bitproc_buf);
s5p_mfc_bitproc_phys = 0;
s5p_mfc_bitproc_buf = NULL;
release_firmware(fw_blob);
return -EIO;
}
dev->bank1 = s5p_mfc_bitproc_phys;
b_base = vb2_dma_contig_memops.alloc(
dev->alloc_ctx[MFC_BANK2_ALLOC_CTX], 1 << MFC_BANK2_ALIGN_ORDER);
if (IS_ERR(b_base)) {
vb2_dma_contig_memops.put(s5p_mfc_bitproc_buf);
s5p_mfc_bitproc_phys = 0;
s5p_mfc_bitproc_buf = NULL;
mfc_err("Allocating bank2 base failed\n");
release_firmware(fw_blob);
return -ENOMEM;
}
bank2_base_phys = s5p_mfc_mem_cookie(
dev->alloc_ctx[MFC_BANK2_ALLOC_CTX], b_base);
vb2_dma_contig_memops.put(b_base);
if (bank2_base_phys & ((1 << MFC_BASE_ALIGN_ORDER) - 1)) {
mfc_err("The base memory for bank 2 is not aligned to 128KB\n");
vb2_dma_contig_memops.put(s5p_mfc_bitproc_buf);
s5p_mfc_bitproc_phys = 0;
s5p_mfc_bitproc_buf = NULL;
release_firmware(fw_blob);
return -EIO;
}
dev->bank2 = bank2_base_phys;
memcpy(s5p_mfc_bitproc_virt, fw_blob->data, fw_blob->size);
wmb();
release_firmware(fw_blob);
mfc_debug_leave();
return 0;
}
/* Reload firmware to MFC */
int s5p_mfc_reload_firmware(struct s5p_mfc_dev *dev)
{
struct firmware *fw_blob;
int err;
/* Firmare has to be present as a separate file or compiled
* into kernel. */
mfc_debug_enter();
err = request_firmware((const struct firmware **)&fw_blob,
"s5p-mfc.fw", dev->v4l2_dev.dev);
if (err != 0) {
mfc_err("Firmware is not present in the /lib/firmware directory nor compiled in kernel\n");
return -EINVAL;
}
if (fw_blob->size > dev->fw_size) {
mfc_err("MFC firmware is too big to be loaded\n");
release_firmware(fw_blob);
return -ENOMEM;
}
if (s5p_mfc_bitproc_buf == NULL || s5p_mfc_bitproc_phys == 0) {
mfc_err("MFC firmware is not allocated or was not mapped correctly\n");
release_firmware(fw_blob);
return -EINVAL;
}
memcpy(s5p_mfc_bitproc_virt, fw_blob->data, fw_blob->size);
wmb();
release_firmware(fw_blob);
mfc_debug_leave();
return 0;
}
/* Release firmware memory */
int s5p_mfc_release_firmware(struct s5p_mfc_dev *dev)
{
/* Before calling this function one has to make sure
* that MFC is no longer processing */
if (!s5p_mfc_bitproc_buf)
return -EINVAL;
vb2_dma_contig_memops.put(s5p_mfc_bitproc_buf);
s5p_mfc_bitproc_virt = NULL;
s5p_mfc_bitproc_phys = 0;
s5p_mfc_bitproc_buf = NULL;
return 0;
}
/* Reset the device */
int s5p_mfc_reset(struct s5p_mfc_dev *dev)
{
unsigned int mc_status;
unsigned long timeout;
mfc_debug_enter();
/* Stop procedure */
/* reset RISC */
mfc_write(dev, 0x3f6, S5P_FIMV_SW_RESET);
/* All reset except for MC */
mfc_write(dev, 0x3e2, S5P_FIMV_SW_RESET);
mdelay(10);
timeout = jiffies + msecs_to_jiffies(MFC_BW_TIMEOUT);
/* Check MC status */
do {
if (time_after(jiffies, timeout)) {
mfc_err("Timeout while resetting MFC\n");
return -EIO;
}
mc_status = mfc_read(dev, S5P_FIMV_MC_STATUS);
} while (mc_status & 0x3);
mfc_write(dev, 0x0, S5P_FIMV_SW_RESET);
mfc_write(dev, 0x3fe, S5P_FIMV_SW_RESET);
mfc_debug_leave();
return 0;
}
static inline void s5p_mfc_init_memctrl(struct s5p_mfc_dev *dev)
{
mfc_write(dev, dev->bank1, S5P_FIMV_MC_DRAMBASE_ADR_A);
mfc_write(dev, dev->bank2, S5P_FIMV_MC_DRAMBASE_ADR_B);
mfc_debug(2, "Bank1: %08x, Bank2: %08x\n", dev->bank1, dev->bank2);
}
static inline void s5p_mfc_clear_cmds(struct s5p_mfc_dev *dev)
{
mfc_write(dev, 0xffffffff, S5P_FIMV_SI_CH0_INST_ID);
mfc_write(dev, 0xffffffff, S5P_FIMV_SI_CH1_INST_ID);
mfc_write(dev, 0, S5P_FIMV_RISC2HOST_CMD);
mfc_write(dev, 0, S5P_FIMV_HOST2RISC_CMD);
}
/* Initialize hardware */
int s5p_mfc_init_hw(struct s5p_mfc_dev *dev)
{
unsigned int ver;
int ret;
mfc_debug_enter();
if (!s5p_mfc_bitproc_buf)
return -EINVAL;
/* 0. MFC reset */
mfc_debug(2, "MFC reset..\n");
s5p_mfc_clock_on();
ret = s5p_mfc_reset(dev);
if (ret) {
mfc_err("Failed to reset MFC - timeout\n");
return ret;
}
mfc_debug(2, "Done MFC reset..\n");
/* 1. Set DRAM base Addr */
s5p_mfc_init_memctrl(dev);
/* 2. Initialize registers of channel I/F */
s5p_mfc_clear_cmds(dev);
/* 3. Release reset signal to the RISC */
s5p_mfc_clean_dev_int_flags(dev);
mfc_write(dev, 0x3ff, S5P_FIMV_SW_RESET);
mfc_debug(2, "Will now wait for completion of firmware transfer\n");
if (s5p_mfc_wait_for_done_dev(dev, S5P_FIMV_R2H_CMD_FW_STATUS_RET)) {
mfc_err("Failed to load firmware\n");
s5p_mfc_reset(dev);
s5p_mfc_clock_off();
return -EIO;
}
s5p_mfc_clean_dev_int_flags(dev);
/* 4. Initialize firmware */
ret = s5p_mfc_sys_init_cmd(dev);
if (ret) {
mfc_err("Failed to send command to MFC - timeout\n");
s5p_mfc_reset(dev);
s5p_mfc_clock_off();
return ret;
}
mfc_debug(2, "Ok, now will write a command to init the system\n");
if (s5p_mfc_wait_for_done_dev(dev, S5P_FIMV_R2H_CMD_SYS_INIT_RET)) {
mfc_err("Failed to load firmware\n");
s5p_mfc_reset(dev);
s5p_mfc_clock_off();
return -EIO;
}
dev->int_cond = 0;
if (dev->int_err != 0 || dev->int_type !=
S5P_FIMV_R2H_CMD_SYS_INIT_RET) {
/* Failure. */
mfc_err("Failed to init firmware - error: %d int: %d\n",
dev->int_err, dev->int_type);
s5p_mfc_reset(dev);
s5p_mfc_clock_off();
return -EIO;
}
ver = mfc_read(dev, S5P_FIMV_FW_VERSION);
mfc_debug(2, "MFC F/W version : %02xyy, %02xmm, %02xdd\n",
(ver >> 16) & 0xFF, (ver >> 8) & 0xFF, ver & 0xFF);
s5p_mfc_clock_off();
mfc_debug_leave();
return 0;
}
int s5p_mfc_sleep(struct s5p_mfc_dev *dev)
{
int ret;
mfc_debug_enter();
s5p_mfc_clock_on();
s5p_mfc_clean_dev_int_flags(dev);
ret = s5p_mfc_sleep_cmd(dev);
if (ret) {
mfc_err("Failed to send command to MFC - timeout\n");
return ret;
}
if (s5p_mfc_wait_for_done_dev(dev, S5P_FIMV_R2H_CMD_SLEEP_RET)) {
mfc_err("Failed to sleep\n");
return -EIO;
}
s5p_mfc_clock_off();
dev->int_cond = 0;
if (dev->int_err != 0 || dev->int_type !=
S5P_FIMV_R2H_CMD_SLEEP_RET) {
/* Failure. */
mfc_err("Failed to sleep - error: %d int: %d\n", dev->int_err,
dev->int_type);
return -EIO;
}
mfc_debug_leave();
return ret;
}
int s5p_mfc_wakeup(struct s5p_mfc_dev *dev)
{
int ret;
mfc_debug_enter();
/* 0. MFC reset */
mfc_debug(2, "MFC reset..\n");
s5p_mfc_clock_on();
ret = s5p_mfc_reset(dev);
if (ret) {
mfc_err("Failed to reset MFC - timeout\n");
return ret;
}
mfc_debug(2, "Done MFC reset..\n");
/* 1. Set DRAM base Addr */
s5p_mfc_init_memctrl(dev);
/* 2. Initialize registers of channel I/F */
s5p_mfc_clear_cmds(dev);
s5p_mfc_clean_dev_int_flags(dev);
/* 3. Initialize firmware */
ret = s5p_mfc_wakeup_cmd(dev);
if (ret) {
mfc_err("Failed to send command to MFC - timeout\n");
return ret;
}
/* 4. Release reset signal to the RISC */
mfc_write(dev, 0x3ff, S5P_FIMV_SW_RESET);
mfc_debug(2, "Ok, now will write a command to wakeup the system\n");
if (s5p_mfc_wait_for_done_dev(dev, S5P_FIMV_R2H_CMD_WAKEUP_RET)) {
mfc_err("Failed to load firmware\n");
return -EIO;
}
s5p_mfc_clock_off();
dev->int_cond = 0;
if (dev->int_err != 0 || dev->int_type !=
S5P_FIMV_R2H_CMD_WAKEUP_RET) {
/* Failure. */
mfc_err("Failed to wakeup - error: %d int: %d\n", dev->int_err,
dev->int_type);
return -EIO;
}
mfc_debug_leave();
return 0;
}