blob: 84c664ea8eb9d014e101f3d22f614352cde306ef [file] [log] [blame]
/*
* Xilinx TFT frame buffer driver
*
* Author: MontaVista Software, Inc.
* source@mvista.com
*
* 2002-2007 (c) MontaVista Software, Inc.
* 2007 (c) Secret Lab Technologies, Ltd.
* 2009 (c) Xilinx Inc.
*
* This file is licensed under the terms of the GNU General Public License
* version 2. This program is licensed "as is" without any warranty of any
* kind, whether express or implied.
*/
/*
* This driver was based on au1100fb.c by MontaVista rewritten for 2.6
* by Embedded Alley Solutions <source@embeddedalley.com>, which in turn
* was based on skeletonfb.c, Skeleton for a frame buffer device by
* Geert Uytterhoeven.
*/
#include <linux/device.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/string.h>
#include <linux/mm.h>
#include <linux/fb.h>
#include <linux/init.h>
#include <linux/dma-mapping.h>
#include <linux/of_device.h>
#include <linux/of_platform.h>
#include <linux/of_address.h>
#include <linux/io.h>
#include <linux/xilinxfb.h>
#include <linux/slab.h>
#ifdef CONFIG_PPC_DCR
#include <asm/dcr.h>
#endif
#define DRIVER_NAME "xilinxfb"
/*
* Xilinx calls it "TFT LCD Controller" though it can also be used for
* the VGA port on the Xilinx ML40x board. This is a hardware display
* controller for a 640x480 resolution TFT or VGA screen.
*
* The interface to the framebuffer is nice and simple. There are two
* control registers. The first tells the LCD interface where in memory
* the frame buffer is (only the 11 most significant bits are used, so
* don't start thinking about scrolling). The second allows the LCD to
* be turned on or off as well as rotated 180 degrees.
*
* In case of direct BUS access the second control register will be at
* an offset of 4 as compared to the DCR access where the offset is 1
* i.e. REG_CTRL. So this is taken care in the function
* xilinx_fb_out32 where it left shifts the offset 2 times in case of
* direct BUS access.
*/
#define NUM_REGS 2
#define REG_FB_ADDR 0
#define REG_CTRL 1
#define REG_CTRL_ENABLE 0x0001
#define REG_CTRL_ROTATE 0x0002
/*
* The hardware only handles a single mode: 640x480 24 bit true
* color. Each pixel gets a word (32 bits) of memory. Within each word,
* the 8 most significant bits are ignored, the next 8 bits are the red
* level, the next 8 bits are the green level and the 8 least
* significant bits are the blue level. Each row of the LCD uses 1024
* words, but only the first 640 pixels are displayed with the other 384
* words being ignored. There are 480 rows.
*/
#define BYTES_PER_PIXEL 4
#define BITS_PER_PIXEL (BYTES_PER_PIXEL * 8)
#define RED_SHIFT 16
#define GREEN_SHIFT 8
#define BLUE_SHIFT 0
#define PALETTE_ENTRIES_NO 16 /* passed to fb_alloc_cmap() */
/*
* Default xilinxfb configuration
*/
static struct xilinxfb_platform_data xilinx_fb_default_pdata = {
.xres = 640,
.yres = 480,
.xvirt = 1024,
.yvirt = 480,
};
/*
* Here are the default fb_fix_screeninfo and fb_var_screeninfo structures
*/
static struct fb_fix_screeninfo xilinx_fb_fix = {
.id = "Xilinx",
.type = FB_TYPE_PACKED_PIXELS,
.visual = FB_VISUAL_TRUECOLOR,
.accel = FB_ACCEL_NONE
};
static struct fb_var_screeninfo xilinx_fb_var = {
.bits_per_pixel = BITS_PER_PIXEL,
.red = { RED_SHIFT, 8, 0 },
.green = { GREEN_SHIFT, 8, 0 },
.blue = { BLUE_SHIFT, 8, 0 },
.transp = { 0, 0, 0 },
.activate = FB_ACTIVATE_NOW
};
#define BUS_ACCESS_FLAG 0x1 /* 1 = BUS, 0 = DCR */
#define LITTLE_ENDIAN_ACCESS 0x2 /* LITTLE ENDIAN IO functions */
struct xilinxfb_drvdata {
struct fb_info info; /* FB driver info record */
phys_addr_t regs_phys; /* phys. address of the control
registers */
void __iomem *regs; /* virt. address of the control
registers */
#ifdef CONFIG_PPC_DCR
dcr_host_t dcr_host;
unsigned int dcr_len;
#endif
void *fb_virt; /* virt. address of the frame buffer */
dma_addr_t fb_phys; /* phys. address of the frame buffer */
int fb_alloced; /* Flag, was the fb memory alloced? */
u8 flags; /* features of the driver */
u32 reg_ctrl_default;
u32 pseudo_palette[PALETTE_ENTRIES_NO];
/* Fake palette of 16 colors */
};
#define to_xilinxfb_drvdata(_info) \
container_of(_info, struct xilinxfb_drvdata, info)
/*
* The XPS TFT Controller can be accessed through BUS or DCR interface.
* To perform the read/write on the registers we need to check on
* which bus its connected and call the appropriate write API.
*/
static void xilinx_fb_out32(struct xilinxfb_drvdata *drvdata, u32 offset,
u32 val)
{
if (drvdata->flags & BUS_ACCESS_FLAG) {
if (drvdata->flags & LITTLE_ENDIAN_ACCESS)
iowrite32(val, drvdata->regs + (offset << 2));
else
iowrite32be(val, drvdata->regs + (offset << 2));
}
#ifdef CONFIG_PPC_DCR
else
dcr_write(drvdata->dcr_host, offset, val);
#endif
}
static u32 xilinx_fb_in32(struct xilinxfb_drvdata *drvdata, u32 offset)
{
if (drvdata->flags & BUS_ACCESS_FLAG) {
if (drvdata->flags & LITTLE_ENDIAN_ACCESS)
return ioread32(drvdata->regs + (offset << 2));
else
return ioread32be(drvdata->regs + (offset << 2));
}
#ifdef CONFIG_PPC_DCR
else
return dcr_read(drvdata->dcr_host, offset);
#endif
return 0;
}
static int
xilinx_fb_setcolreg(unsigned regno, unsigned red, unsigned green, unsigned blue,
unsigned transp, struct fb_info *fbi)
{
u32 *palette = fbi->pseudo_palette;
if (regno >= PALETTE_ENTRIES_NO)
return -EINVAL;
if (fbi->var.grayscale) {
/* Convert color to grayscale.
* grayscale = 0.30*R + 0.59*G + 0.11*B */
red = green = blue =
(red * 77 + green * 151 + blue * 28 + 127) >> 8;
}
/* fbi->fix.visual is always FB_VISUAL_TRUECOLOR */
/* We only handle 8 bits of each color. */
red >>= 8;
green >>= 8;
blue >>= 8;
palette[regno] = (red << RED_SHIFT) | (green << GREEN_SHIFT) |
(blue << BLUE_SHIFT);
return 0;
}
static int
xilinx_fb_blank(int blank_mode, struct fb_info *fbi)
{
struct xilinxfb_drvdata *drvdata = to_xilinxfb_drvdata(fbi);
switch (blank_mode) {
case FB_BLANK_UNBLANK:
/* turn on panel */
xilinx_fb_out32(drvdata, REG_CTRL, drvdata->reg_ctrl_default);
break;
case FB_BLANK_NORMAL:
case FB_BLANK_VSYNC_SUSPEND:
case FB_BLANK_HSYNC_SUSPEND:
case FB_BLANK_POWERDOWN:
/* turn off panel */
xilinx_fb_out32(drvdata, REG_CTRL, 0);
default:
break;
}
return 0; /* success */
}
static struct fb_ops xilinxfb_ops =
{
.owner = THIS_MODULE,
.fb_setcolreg = xilinx_fb_setcolreg,
.fb_blank = xilinx_fb_blank,
.fb_fillrect = cfb_fillrect,
.fb_copyarea = cfb_copyarea,
.fb_imageblit = cfb_imageblit,
};
/* ---------------------------------------------------------------------
* Bus independent setup/teardown
*/
static int xilinxfb_assign(struct platform_device *pdev,
struct xilinxfb_drvdata *drvdata,
struct xilinxfb_platform_data *pdata)
{
int rc;
struct device *dev = &pdev->dev;
int fbsize = pdata->xvirt * pdata->yvirt * BYTES_PER_PIXEL;
if (drvdata->flags & BUS_ACCESS_FLAG) {
struct resource *res;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
drvdata->regs = devm_ioremap_resource(&pdev->dev, res);
if (IS_ERR(drvdata->regs)) {
rc = PTR_ERR(drvdata->regs);
goto err_region;
}
drvdata->regs_phys = res->start;
}
/* Allocate the framebuffer memory */
if (pdata->fb_phys) {
drvdata->fb_phys = pdata->fb_phys;
drvdata->fb_virt = ioremap(pdata->fb_phys, fbsize);
} else {
drvdata->fb_alloced = 1;
drvdata->fb_virt = dma_alloc_coherent(dev, PAGE_ALIGN(fbsize),
&drvdata->fb_phys, GFP_KERNEL);
}
if (!drvdata->fb_virt) {
dev_err(dev, "Could not allocate frame buffer memory\n");
rc = -ENOMEM;
if (drvdata->flags & BUS_ACCESS_FLAG)
goto err_fbmem;
else
goto err_region;
}
/* Clear (turn to black) the framebuffer */
memset_io((void __iomem *)drvdata->fb_virt, 0, fbsize);
/* Tell the hardware where the frame buffer is */
xilinx_fb_out32(drvdata, REG_FB_ADDR, drvdata->fb_phys);
rc = xilinx_fb_in32(drvdata, REG_FB_ADDR);
/* Endianess detection */
if (rc != drvdata->fb_phys) {
drvdata->flags |= LITTLE_ENDIAN_ACCESS;
xilinx_fb_out32(drvdata, REG_FB_ADDR, drvdata->fb_phys);
}
/* Turn on the display */
drvdata->reg_ctrl_default = REG_CTRL_ENABLE;
if (pdata->rotate_screen)
drvdata->reg_ctrl_default |= REG_CTRL_ROTATE;
xilinx_fb_out32(drvdata, REG_CTRL,
drvdata->reg_ctrl_default);
/* Fill struct fb_info */
drvdata->info.device = dev;
drvdata->info.screen_base = (void __iomem *)drvdata->fb_virt;
drvdata->info.fbops = &xilinxfb_ops;
drvdata->info.fix = xilinx_fb_fix;
drvdata->info.fix.smem_start = drvdata->fb_phys;
drvdata->info.fix.smem_len = fbsize;
drvdata->info.fix.line_length = pdata->xvirt * BYTES_PER_PIXEL;
drvdata->info.pseudo_palette = drvdata->pseudo_palette;
drvdata->info.flags = FBINFO_DEFAULT;
drvdata->info.var = xilinx_fb_var;
drvdata->info.var.height = pdata->screen_height_mm;
drvdata->info.var.width = pdata->screen_width_mm;
drvdata->info.var.xres = pdata->xres;
drvdata->info.var.yres = pdata->yres;
drvdata->info.var.xres_virtual = pdata->xvirt;
drvdata->info.var.yres_virtual = pdata->yvirt;
/* Allocate a colour map */
rc = fb_alloc_cmap(&drvdata->info.cmap, PALETTE_ENTRIES_NO, 0);
if (rc) {
dev_err(dev, "Fail to allocate colormap (%d entries)\n",
PALETTE_ENTRIES_NO);
goto err_cmap;
}
/* Register new frame buffer */
rc = register_framebuffer(&drvdata->info);
if (rc) {
dev_err(dev, "Could not register frame buffer\n");
goto err_regfb;
}
if (drvdata->flags & BUS_ACCESS_FLAG) {
/* Put a banner in the log (for DEBUG) */
dev_dbg(dev, "regs: phys=%pa, virt=%p\n",
&drvdata->regs_phys, drvdata->regs);
}
/* Put a banner in the log (for DEBUG) */
dev_dbg(dev, "fb: phys=%llx, virt=%p, size=%x\n",
(unsigned long long)drvdata->fb_phys, drvdata->fb_virt, fbsize);
return 0; /* success */
err_regfb:
fb_dealloc_cmap(&drvdata->info.cmap);
err_cmap:
if (drvdata->fb_alloced)
dma_free_coherent(dev, PAGE_ALIGN(fbsize), drvdata->fb_virt,
drvdata->fb_phys);
else
iounmap(drvdata->fb_virt);
/* Turn off the display */
xilinx_fb_out32(drvdata, REG_CTRL, 0);
err_fbmem:
if (drvdata->flags & BUS_ACCESS_FLAG)
devm_iounmap(dev, drvdata->regs);
err_region:
kfree(drvdata);
dev_set_drvdata(dev, NULL);
return rc;
}
static int xilinxfb_release(struct device *dev)
{
struct xilinxfb_drvdata *drvdata = dev_get_drvdata(dev);
#if !defined(CONFIG_FRAMEBUFFER_CONSOLE) && defined(CONFIG_LOGO)
xilinx_fb_blank(VESA_POWERDOWN, &drvdata->info);
#endif
unregister_framebuffer(&drvdata->info);
fb_dealloc_cmap(&drvdata->info.cmap);
if (drvdata->fb_alloced)
dma_free_coherent(dev, PAGE_ALIGN(drvdata->info.fix.smem_len),
drvdata->fb_virt, drvdata->fb_phys);
else
iounmap(drvdata->fb_virt);
/* Turn off the display */
xilinx_fb_out32(drvdata, REG_CTRL, 0);
/* Release the resources, as allocated based on interface */
if (drvdata->flags & BUS_ACCESS_FLAG)
devm_iounmap(dev, drvdata->regs);
#ifdef CONFIG_PPC_DCR
else
dcr_unmap(drvdata->dcr_host, drvdata->dcr_len);
#endif
kfree(drvdata);
dev_set_drvdata(dev, NULL);
return 0;
}
/* ---------------------------------------------------------------------
* OF bus binding
*/
static int xilinxfb_of_probe(struct platform_device *op)
{
const u32 *prop;
u32 tft_access = 0;
struct xilinxfb_platform_data pdata;
int size;
struct xilinxfb_drvdata *drvdata;
/* Copy with the default pdata (not a ptr reference!) */
pdata = xilinx_fb_default_pdata;
/* Allocate the driver data region */
drvdata = kzalloc(sizeof(*drvdata), GFP_KERNEL);
if (!drvdata) {
dev_err(&op->dev, "Couldn't allocate device private record\n");
return -ENOMEM;
}
/*
* To check whether the core is connected directly to DCR or BUS
* interface and initialize the tft_access accordingly.
*/
of_property_read_u32(op->dev.of_node, "xlnx,dcr-splb-slave-if",
&tft_access);
/*
* Fill the resource structure if its direct BUS interface
* otherwise fill the dcr_host structure.
*/
if (tft_access) {
drvdata->flags |= BUS_ACCESS_FLAG;
}
#ifdef CONFIG_PPC_DCR
else {
int start;
start = dcr_resource_start(op->dev.of_node, 0);
drvdata->dcr_len = dcr_resource_len(op->dev.of_node, 0);
drvdata->dcr_host = dcr_map(op->dev.of_node, start, drvdata->dcr_len);
if (!DCR_MAP_OK(drvdata->dcr_host)) {
dev_err(&op->dev, "invalid DCR address\n");
kfree(drvdata);
return -ENODEV;
}
}
#endif
prop = of_get_property(op->dev.of_node, "phys-size", &size);
if ((prop) && (size >= sizeof(u32)*2)) {
pdata.screen_width_mm = prop[0];
pdata.screen_height_mm = prop[1];
}
prop = of_get_property(op->dev.of_node, "resolution", &size);
if ((prop) && (size >= sizeof(u32)*2)) {
pdata.xres = prop[0];
pdata.yres = prop[1];
}
prop = of_get_property(op->dev.of_node, "virtual-resolution", &size);
if ((prop) && (size >= sizeof(u32)*2)) {
pdata.xvirt = prop[0];
pdata.yvirt = prop[1];
}
if (of_find_property(op->dev.of_node, "rotate-display", NULL))
pdata.rotate_screen = 1;
dev_set_drvdata(&op->dev, drvdata);
return xilinxfb_assign(op, drvdata, &pdata);
}
static int xilinxfb_of_remove(struct platform_device *op)
{
return xilinxfb_release(&op->dev);
}
/* Match table for of_platform binding */
static struct of_device_id xilinxfb_of_match[] = {
{ .compatible = "xlnx,xps-tft-1.00.a", },
{ .compatible = "xlnx,xps-tft-2.00.a", },
{ .compatible = "xlnx,xps-tft-2.01.a", },
{ .compatible = "xlnx,plb-tft-cntlr-ref-1.00.a", },
{ .compatible = "xlnx,plb-dvi-cntlr-ref-1.00.c", },
{},
};
MODULE_DEVICE_TABLE(of, xilinxfb_of_match);
static struct platform_driver xilinxfb_of_driver = {
.probe = xilinxfb_of_probe,
.remove = xilinxfb_of_remove,
.driver = {
.name = DRIVER_NAME,
.owner = THIS_MODULE,
.of_match_table = xilinxfb_of_match,
},
};
module_platform_driver(xilinxfb_of_driver);
MODULE_AUTHOR("MontaVista Software, Inc. <source@mvista.com>");
MODULE_DESCRIPTION("Xilinx TFT frame buffer driver");
MODULE_LICENSE("GPL");