| // SPDX-License-Identifier: GPL-2.0-or-later | |
| /* | |
| * ITE IT913X silicon tuner driver | |
| * | |
| * Copyright (C) 2011 Malcolm Priestley (tvboxspy@gmail.com) | |
| * IT9137 Copyright (C) ITE Tech Inc. | |
| */ | |
| #include "it913x.h" | |
| #include <linux/platform_device.h> | |
| #include <linux/regmap.h> | |
| struct it913x_dev { | |
| struct platform_device *pdev; | |
| struct regmap *regmap; | |
| struct dvb_frontend *fe; | |
| u8 chip_ver:2; | |
| u8 role:2; | |
| u16 xtal; | |
| u8 fdiv; | |
| u8 clk_mode; | |
| u32 fn_min; | |
| bool active; | |
| }; | |
| static int it913x_init(struct dvb_frontend *fe) | |
| { | |
| struct it913x_dev *dev = fe->tuner_priv; | |
| struct platform_device *pdev = dev->pdev; | |
| int ret; | |
| unsigned int utmp; | |
| u8 iqik_m_cal, nv_val, buf[2]; | |
| static const u8 nv[] = {48, 32, 24, 16, 12, 8, 6, 4, 2}; | |
| unsigned long timeout; | |
| dev_dbg(&pdev->dev, "role %u\n", dev->role); | |
| ret = regmap_write(dev->regmap, 0x80ec4c, 0x68); | |
| if (ret) | |
| goto err; | |
| usleep_range(10000, 100000); | |
| ret = regmap_read(dev->regmap, 0x80ec86, &utmp); | |
| if (ret) | |
| goto err; | |
| switch (utmp) { | |
| case 0: | |
| /* 12.000 MHz */ | |
| dev->clk_mode = utmp; | |
| dev->xtal = 2000; | |
| dev->fdiv = 3; | |
| iqik_m_cal = 16; | |
| break; | |
| case 1: | |
| /* 20.480 MHz */ | |
| dev->clk_mode = utmp; | |
| dev->xtal = 640; | |
| dev->fdiv = 1; | |
| iqik_m_cal = 6; | |
| break; | |
| default: | |
| dev_err(&pdev->dev, "unknown clock identifier %d\n", utmp); | |
| ret = -EINVAL; | |
| goto err; | |
| } | |
| ret = regmap_read(dev->regmap, 0x80ed03, &utmp); | |
| if (ret) | |
| goto err; | |
| else if (utmp < ARRAY_SIZE(nv)) | |
| nv_val = nv[utmp]; | |
| else | |
| nv_val = 2; | |
| #define TIMEOUT 50 | |
| timeout = jiffies + msecs_to_jiffies(TIMEOUT); | |
| while (!time_after(jiffies, timeout)) { | |
| ret = regmap_bulk_read(dev->regmap, 0x80ed23, buf, 2); | |
| if (ret) | |
| goto err; | |
| utmp = (buf[1] << 8) | (buf[0] << 0); | |
| if (utmp) | |
| break; | |
| } | |
| dev_dbg(&pdev->dev, "r_fbc_m_bdry took %u ms, val %u\n", | |
| jiffies_to_msecs(jiffies) - | |
| (jiffies_to_msecs(timeout) - TIMEOUT), utmp); | |
| dev->fn_min = dev->xtal * utmp; | |
| dev->fn_min /= (dev->fdiv * nv_val); | |
| dev->fn_min *= 1000; | |
| dev_dbg(&pdev->dev, "fn_min %u\n", dev->fn_min); | |
| /* | |
| * Chip version BX never sets that flag so we just wait 50ms in that | |
| * case. It is possible poll BX similarly than AX and then timeout in | |
| * order to get 50ms delay, but that causes about 120 extra I2C | |
| * messages. As for now, we just wait and reduce IO. | |
| */ | |
| if (dev->chip_ver == 1) { | |
| #define TIMEOUT 50 | |
| timeout = jiffies + msecs_to_jiffies(TIMEOUT); | |
| while (!time_after(jiffies, timeout)) { | |
| ret = regmap_read(dev->regmap, 0x80ec82, &utmp); | |
| if (ret) | |
| goto err; | |
| if (utmp) | |
| break; | |
| } | |
| dev_dbg(&pdev->dev, "p_tsm_init_mode took %u ms, val %u\n", | |
| jiffies_to_msecs(jiffies) - | |
| (jiffies_to_msecs(timeout) - TIMEOUT), utmp); | |
| } else { | |
| msleep(50); | |
| } | |
| ret = regmap_write(dev->regmap, 0x80ed81, iqik_m_cal); | |
| if (ret) | |
| goto err; | |
| ret = regmap_write(dev->regmap, 0x80ec57, 0x00); | |
| if (ret) | |
| goto err; | |
| ret = regmap_write(dev->regmap, 0x80ec58, 0x00); | |
| if (ret) | |
| goto err; | |
| ret = regmap_write(dev->regmap, 0x80ec40, 0x01); | |
| if (ret) | |
| goto err; | |
| dev->active = true; | |
| return 0; | |
| err: | |
| dev_dbg(&pdev->dev, "failed %d\n", ret); | |
| return ret; | |
| } | |
| static int it913x_sleep(struct dvb_frontend *fe) | |
| { | |
| struct it913x_dev *dev = fe->tuner_priv; | |
| struct platform_device *pdev = dev->pdev; | |
| int ret, len; | |
| dev_dbg(&pdev->dev, "role %u\n", dev->role); | |
| dev->active = false; | |
| ret = regmap_bulk_write(dev->regmap, 0x80ec40, "\x00", 1); | |
| if (ret) | |
| goto err; | |
| /* | |
| * Writing '0x00' to master tuner register '0x80ec08' causes slave tuner | |
| * communication lost. Due to that, we cannot put master full sleep. | |
| */ | |
| if (dev->role == IT913X_ROLE_DUAL_MASTER) | |
| len = 4; | |
| else | |
| len = 15; | |
| dev_dbg(&pdev->dev, "role %u, len %d\n", dev->role, len); | |
| ret = regmap_bulk_write(dev->regmap, 0x80ec02, | |
| "\x3f\x1f\x3f\x3e\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00", | |
| len); | |
| if (ret) | |
| goto err; | |
| ret = regmap_bulk_write(dev->regmap, 0x80ec12, "\x00\x00\x00\x00", 4); | |
| if (ret) | |
| goto err; | |
| ret = regmap_bulk_write(dev->regmap, 0x80ec17, | |
| "\x00\x00\x00\x00\x00\x00\x00\x00\x00", 9); | |
| if (ret) | |
| goto err; | |
| ret = regmap_bulk_write(dev->regmap, 0x80ec22, | |
| "\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00", 10); | |
| if (ret) | |
| goto err; | |
| ret = regmap_bulk_write(dev->regmap, 0x80ec20, "\x00", 1); | |
| if (ret) | |
| goto err; | |
| ret = regmap_bulk_write(dev->regmap, 0x80ec3f, "\x01", 1); | |
| if (ret) | |
| goto err; | |
| return 0; | |
| err: | |
| dev_dbg(&pdev->dev, "failed %d\n", ret); | |
| return ret; | |
| } | |
| static int it913x_set_params(struct dvb_frontend *fe) | |
| { | |
| struct it913x_dev *dev = fe->tuner_priv; | |
| struct platform_device *pdev = dev->pdev; | |
| struct dtv_frontend_properties *c = &fe->dtv_property_cache; | |
| int ret; | |
| unsigned int utmp; | |
| u32 pre_lo_freq, t_cal_freq; | |
| u16 iqik_m_cal, n_div; | |
| u8 u8tmp, n, l_band, lna_band; | |
| dev_dbg(&pdev->dev, "role=%u, frequency %u, bandwidth_hz %u\n", | |
| dev->role, c->frequency, c->bandwidth_hz); | |
| if (!dev->active) { | |
| ret = -EINVAL; | |
| goto err; | |
| } | |
| if (c->frequency <= 74000000) { | |
| n_div = 48; | |
| n = 0; | |
| } else if (c->frequency <= 111000000) { | |
| n_div = 32; | |
| n = 1; | |
| } else if (c->frequency <= 148000000) { | |
| n_div = 24; | |
| n = 2; | |
| } else if (c->frequency <= 222000000) { | |
| n_div = 16; | |
| n = 3; | |
| } else if (c->frequency <= 296000000) { | |
| n_div = 12; | |
| n = 4; | |
| } else if (c->frequency <= 445000000) { | |
| n_div = 8; | |
| n = 5; | |
| } else if (c->frequency <= dev->fn_min) { | |
| n_div = 6; | |
| n = 6; | |
| } else if (c->frequency <= 950000000) { | |
| n_div = 4; | |
| n = 7; | |
| } else { | |
| n_div = 2; | |
| n = 0; | |
| } | |
| ret = regmap_read(dev->regmap, 0x80ed81, &utmp); | |
| if (ret) | |
| goto err; | |
| iqik_m_cal = utmp * n_div; | |
| if (utmp < 0x20) { | |
| if (dev->clk_mode == 0) | |
| iqik_m_cal = (iqik_m_cal * 9) >> 5; | |
| else | |
| iqik_m_cal >>= 1; | |
| } else { | |
| iqik_m_cal = 0x40 - iqik_m_cal; | |
| if (dev->clk_mode == 0) | |
| iqik_m_cal = ~((iqik_m_cal * 9) >> 5); | |
| else | |
| iqik_m_cal = ~(iqik_m_cal >> 1); | |
| } | |
| t_cal_freq = (c->frequency / 1000) * n_div * dev->fdiv; | |
| pre_lo_freq = t_cal_freq / dev->xtal; | |
| utmp = pre_lo_freq * dev->xtal; | |
| if ((t_cal_freq - utmp) >= (dev->xtal >> 1)) | |
| pre_lo_freq++; | |
| pre_lo_freq += (u32) n << 13; | |
| /* Frequency OMEGA_IQIK_M_CAL_MID*/ | |
| t_cal_freq = pre_lo_freq + (u32)iqik_m_cal; | |
| dev_dbg(&pdev->dev, "t_cal_freq %u, pre_lo_freq %u\n", | |
| t_cal_freq, pre_lo_freq); | |
| if (c->frequency <= 440000000) { | |
| l_band = 0; | |
| lna_band = 0; | |
| } else if (c->frequency <= 484000000) { | |
| l_band = 1; | |
| lna_band = 1; | |
| } else if (c->frequency <= 533000000) { | |
| l_band = 1; | |
| lna_band = 2; | |
| } else if (c->frequency <= 587000000) { | |
| l_band = 1; | |
| lna_band = 3; | |
| } else if (c->frequency <= 645000000) { | |
| l_band = 1; | |
| lna_band = 4; | |
| } else if (c->frequency <= 710000000) { | |
| l_band = 1; | |
| lna_band = 5; | |
| } else if (c->frequency <= 782000000) { | |
| l_band = 1; | |
| lna_band = 6; | |
| } else if (c->frequency <= 860000000) { | |
| l_band = 1; | |
| lna_band = 7; | |
| } else if (c->frequency <= 1492000000) { | |
| l_band = 1; | |
| lna_band = 0; | |
| } else if (c->frequency <= 1685000000) { | |
| l_band = 1; | |
| lna_band = 1; | |
| } else { | |
| ret = -EINVAL; | |
| goto err; | |
| } | |
| /* XXX: latest windows driver does not set that at all */ | |
| ret = regmap_write(dev->regmap, 0x80ee06, lna_band); | |
| if (ret) | |
| goto err; | |
| if (c->bandwidth_hz <= 5000000) | |
| u8tmp = 0; | |
| else if (c->bandwidth_hz <= 6000000) | |
| u8tmp = 2; | |
| else if (c->bandwidth_hz <= 7000000) | |
| u8tmp = 4; | |
| else | |
| u8tmp = 6; /* 8000000 */ | |
| ret = regmap_write(dev->regmap, 0x80ec56, u8tmp); | |
| if (ret) | |
| goto err; | |
| /* XXX: latest windows driver sets different value (a8 != 68) */ | |
| ret = regmap_write(dev->regmap, 0x80ec4c, 0xa0 | (l_band << 3)); | |
| if (ret) | |
| goto err; | |
| ret = regmap_write(dev->regmap, 0x80ec4d, (t_cal_freq >> 0) & 0xff); | |
| if (ret) | |
| goto err; | |
| ret = regmap_write(dev->regmap, 0x80ec4e, (t_cal_freq >> 8) & 0xff); | |
| if (ret) | |
| goto err; | |
| ret = regmap_write(dev->regmap, 0x80011e, (pre_lo_freq >> 0) & 0xff); | |
| if (ret) | |
| goto err; | |
| ret = regmap_write(dev->regmap, 0x80011f, (pre_lo_freq >> 8) & 0xff); | |
| if (ret) | |
| goto err; | |
| return 0; | |
| err: | |
| dev_dbg(&pdev->dev, "failed %d\n", ret); | |
| return ret; | |
| } | |
| static const struct dvb_tuner_ops it913x_tuner_ops = { | |
| .info = { | |
| .name = "ITE IT913X", | |
| .frequency_min_hz = 174 * MHz, | |
| .frequency_max_hz = 862 * MHz, | |
| }, | |
| .init = it913x_init, | |
| .sleep = it913x_sleep, | |
| .set_params = it913x_set_params, | |
| }; | |
| static int it913x_probe(struct platform_device *pdev) | |
| { | |
| struct it913x_platform_data *pdata = pdev->dev.platform_data; | |
| struct dvb_frontend *fe = pdata->fe; | |
| struct it913x_dev *dev; | |
| const struct platform_device_id *id = platform_get_device_id(pdev); | |
| int ret; | |
| char *chip_ver_str; | |
| dev = kzalloc_obj(struct it913x_dev); | |
| if (dev == NULL) { | |
| ret = -ENOMEM; | |
| dev_err(&pdev->dev, "kzalloc() failed\n"); | |
| goto err; | |
| } | |
| dev->pdev = pdev; | |
| dev->regmap = pdata->regmap; | |
| dev->fe = pdata->fe; | |
| dev->chip_ver = id->driver_data; | |
| dev->role = pdata->role; | |
| fe->tuner_priv = dev; | |
| memcpy(&fe->ops.tuner_ops, &it913x_tuner_ops, | |
| sizeof(struct dvb_tuner_ops)); | |
| platform_set_drvdata(pdev, dev); | |
| if (dev->chip_ver == 1) | |
| chip_ver_str = "AX"; | |
| else if (dev->chip_ver == 2) | |
| chip_ver_str = "BX"; | |
| else | |
| chip_ver_str = "??"; | |
| dev_info(&pdev->dev, "ITE IT913X %s successfully attached\n", | |
| chip_ver_str); | |
| dev_dbg(&pdev->dev, "chip_ver %u, role %u\n", dev->chip_ver, dev->role); | |
| return 0; | |
| err: | |
| dev_dbg(&pdev->dev, "failed %d\n", ret); | |
| return ret; | |
| } | |
| static void it913x_remove(struct platform_device *pdev) | |
| { | |
| struct it913x_dev *dev = platform_get_drvdata(pdev); | |
| struct dvb_frontend *fe = dev->fe; | |
| dev_dbg(&pdev->dev, "\n"); | |
| memset(&fe->ops.tuner_ops, 0, sizeof(struct dvb_tuner_ops)); | |
| fe->tuner_priv = NULL; | |
| kfree(dev); | |
| } | |
| static const struct platform_device_id it913x_id_table[] = { | |
| {"it9133ax-tuner", 1}, | |
| {"it9133bx-tuner", 2}, | |
| {}, | |
| }; | |
| MODULE_DEVICE_TABLE(platform, it913x_id_table); | |
| static struct platform_driver it913x_driver = { | |
| .driver = { | |
| .name = "it913x", | |
| .suppress_bind_attrs = true, | |
| }, | |
| .probe = it913x_probe, | |
| .remove = it913x_remove, | |
| .id_table = it913x_id_table, | |
| }; | |
| module_platform_driver(it913x_driver); | |
| MODULE_DESCRIPTION("ITE IT913X silicon tuner driver"); | |
| MODULE_AUTHOR("Antti Palosaari <crope@iki.fi>"); | |
| MODULE_LICENSE("GPL"); |