| // SPDX-License-Identifier: GPL-2.0+ | |
| /* | |
| * c67x00-hcd.c: Cypress C67X00 USB Host Controller Driver | |
| * | |
| * Copyright (C) 2006-2008 Barco N.V. | |
| * Derived from the Cypress cy7c67200/300 ezusb linux driver and | |
| * based on multiple host controller drivers inside the linux kernel. | |
| */ | |
| #include <linux/device.h> | |
| #include <linux/platform_device.h> | |
| #include <linux/usb.h> | |
| #include "c67x00.h" | |
| #include "c67x00-hcd.h" | |
| /* -------------------------------------------------------------------------- | |
| * Root Hub Support | |
| */ | |
| static __u8 c67x00_hub_des[] = { | |
| 0x09, /* __u8 bLength; */ | |
| USB_DT_HUB, /* __u8 bDescriptorType; Hub-descriptor */ | |
| 0x02, /* __u8 bNbrPorts; */ | |
| 0x00, /* __u16 wHubCharacteristics; */ | |
| 0x00, /* (per-port OC, no power switching) */ | |
| 0x32, /* __u8 bPwrOn2pwrGood; 2ms */ | |
| 0x00, /* __u8 bHubContrCurrent; 0 mA */ | |
| 0x00, /* __u8 DeviceRemovable; ** 7 Ports max ** */ | |
| 0xff, /* __u8 PortPwrCtrlMask; ** 7 ports max ** */ | |
| }; | |
| static void c67x00_hub_reset_host_port(struct c67x00_sie *sie, int port) | |
| { | |
| struct c67x00_hcd *c67x00 = sie->private_data; | |
| unsigned long flags; | |
| c67x00_ll_husb_reset(sie, port); | |
| spin_lock_irqsave(&c67x00->lock, flags); | |
| c67x00_ll_husb_reset_port(sie, port); | |
| spin_unlock_irqrestore(&c67x00->lock, flags); | |
| c67x00_ll_set_husb_eot(sie->dev, DEFAULT_EOT); | |
| } | |
| static int c67x00_hub_status_data(struct usb_hcd *hcd, char *buf) | |
| { | |
| struct c67x00_hcd *c67x00 = hcd_to_c67x00_hcd(hcd); | |
| struct c67x00_sie *sie = c67x00->sie; | |
| u16 status; | |
| int i; | |
| *buf = 0; | |
| status = c67x00_ll_usb_get_status(sie); | |
| for (i = 0; i < C67X00_PORTS; i++) | |
| if (status & PORT_CONNECT_CHANGE(i)) | |
| *buf |= (1 << i); | |
| /* bit 0 denotes hub change, b1..n port change */ | |
| *buf <<= 1; | |
| return !!*buf; | |
| } | |
| static int c67x00_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, | |
| u16 wIndex, char *buf, u16 wLength) | |
| { | |
| struct c67x00_hcd *c67x00 = hcd_to_c67x00_hcd(hcd); | |
| struct c67x00_sie *sie = c67x00->sie; | |
| u16 status, usb_status; | |
| int len = 0; | |
| unsigned int port = wIndex-1; | |
| u16 wPortChange, wPortStatus; | |
| switch (typeReq) { | |
| case GetHubStatus: | |
| *(__le32 *) buf = cpu_to_le32(0); | |
| len = 4; /* hub power */ | |
| break; | |
| case GetPortStatus: | |
| if (wIndex > C67X00_PORTS) | |
| return -EPIPE; | |
| status = c67x00_ll_usb_get_status(sie); | |
| usb_status = c67x00_ll_get_usb_ctl(sie); | |
| wPortChange = 0; | |
| if (status & PORT_CONNECT_CHANGE(port)) | |
| wPortChange |= USB_PORT_STAT_C_CONNECTION; | |
| wPortStatus = USB_PORT_STAT_POWER; | |
| if (!(status & PORT_SE0_STATUS(port))) | |
| wPortStatus |= USB_PORT_STAT_CONNECTION; | |
| if (usb_status & LOW_SPEED_PORT(port)) { | |
| wPortStatus |= USB_PORT_STAT_LOW_SPEED; | |
| c67x00->low_speed_ports |= (1 << port); | |
| } else | |
| c67x00->low_speed_ports &= ~(1 << port); | |
| if (usb_status & SOF_EOP_EN(port)) | |
| wPortStatus |= USB_PORT_STAT_ENABLE; | |
| *(__le16 *) buf = cpu_to_le16(wPortStatus); | |
| *(__le16 *) (buf + 2) = cpu_to_le16(wPortChange); | |
| len = 4; | |
| break; | |
| case SetHubFeature: /* We don't implement these */ | |
| case ClearHubFeature: | |
| switch (wValue) { | |
| case C_HUB_OVER_CURRENT: | |
| case C_HUB_LOCAL_POWER: | |
| len = 0; | |
| break; | |
| default: | |
| return -EPIPE; | |
| } | |
| break; | |
| case SetPortFeature: | |
| if (wIndex > C67X00_PORTS) | |
| return -EPIPE; | |
| switch (wValue) { | |
| case USB_PORT_FEAT_SUSPEND: | |
| dev_dbg(c67x00_hcd_dev(c67x00), | |
| "SetPortFeature %d (SUSPEND)\n", port); | |
| len = 0; | |
| break; | |
| case USB_PORT_FEAT_RESET: | |
| c67x00_hub_reset_host_port(sie, port); | |
| len = 0; | |
| break; | |
| case USB_PORT_FEAT_POWER: | |
| /* Power always enabled */ | |
| len = 0; | |
| break; | |
| default: | |
| dev_dbg(c67x00_hcd_dev(c67x00), | |
| "%s: SetPortFeature %d (0x%04x) Error!\n", | |
| __func__, port, wValue); | |
| return -EPIPE; | |
| } | |
| break; | |
| case ClearPortFeature: | |
| if (wIndex > C67X00_PORTS) | |
| return -EPIPE; | |
| switch (wValue) { | |
| case USB_PORT_FEAT_ENABLE: | |
| /* Reset the port so that the c67x00 also notices the | |
| * disconnect */ | |
| c67x00_hub_reset_host_port(sie, port); | |
| len = 0; | |
| break; | |
| case USB_PORT_FEAT_C_ENABLE: | |
| dev_dbg(c67x00_hcd_dev(c67x00), | |
| "ClearPortFeature (%d): C_ENABLE\n", port); | |
| len = 0; | |
| break; | |
| case USB_PORT_FEAT_SUSPEND: | |
| dev_dbg(c67x00_hcd_dev(c67x00), | |
| "ClearPortFeature (%d): SUSPEND\n", port); | |
| len = 0; | |
| break; | |
| case USB_PORT_FEAT_C_SUSPEND: | |
| dev_dbg(c67x00_hcd_dev(c67x00), | |
| "ClearPortFeature (%d): C_SUSPEND\n", port); | |
| len = 0; | |
| break; | |
| case USB_PORT_FEAT_POWER: | |
| dev_dbg(c67x00_hcd_dev(c67x00), | |
| "ClearPortFeature (%d): POWER\n", port); | |
| return -EPIPE; | |
| case USB_PORT_FEAT_C_CONNECTION: | |
| c67x00_ll_usb_clear_status(sie, | |
| PORT_CONNECT_CHANGE(port)); | |
| len = 0; | |
| break; | |
| case USB_PORT_FEAT_C_OVER_CURRENT: | |
| dev_dbg(c67x00_hcd_dev(c67x00), | |
| "ClearPortFeature (%d): OVER_CURRENT\n", port); | |
| len = 0; | |
| break; | |
| case USB_PORT_FEAT_C_RESET: | |
| dev_dbg(c67x00_hcd_dev(c67x00), | |
| "ClearPortFeature (%d): C_RESET\n", port); | |
| len = 0; | |
| break; | |
| default: | |
| dev_dbg(c67x00_hcd_dev(c67x00), | |
| "%s: ClearPortFeature %d (0x%04x) Error!\n", | |
| __func__, port, wValue); | |
| return -EPIPE; | |
| } | |
| break; | |
| case GetHubDescriptor: | |
| len = min_t(unsigned int, sizeof(c67x00_hub_des), wLength); | |
| memcpy(buf, c67x00_hub_des, len); | |
| break; | |
| default: | |
| dev_dbg(c67x00_hcd_dev(c67x00), "%s: unknown\n", __func__); | |
| return -EPIPE; | |
| } | |
| return 0; | |
| } | |
| /* --------------------------------------------------------------------- | |
| * Main part of host controller driver | |
| */ | |
| /* | |
| * c67x00_hcd_irq | |
| * | |
| * This function is called from the interrupt handler in c67x00-drv.c | |
| */ | |
| static void c67x00_hcd_irq(struct c67x00_sie *sie, u16 int_status, u16 msg) | |
| { | |
| struct c67x00_hcd *c67x00 = sie->private_data; | |
| struct usb_hcd *hcd = c67x00_hcd_to_hcd(c67x00); | |
| /* Handle sie message flags */ | |
| if (msg) { | |
| if (msg & HUSB_TDListDone) | |
| c67x00_sched_kick(c67x00); | |
| else | |
| dev_warn(c67x00_hcd_dev(c67x00), | |
| "Unknown SIE msg flag(s): 0x%04x\n", msg); | |
| } | |
| if (unlikely(hcd->state == HC_STATE_HALT)) | |
| return; | |
| if (!HCD_HW_ACCESSIBLE(hcd)) | |
| return; | |
| /* Handle Start of frame events */ | |
| if (int_status & SOFEOP_FLG(sie->sie_num)) { | |
| c67x00_ll_usb_clear_status(sie, SOF_EOP_IRQ_FLG); | |
| c67x00_sched_kick(c67x00); | |
| } | |
| } | |
| /* | |
| * c67x00_hcd_start: Host controller start hook | |
| */ | |
| static int c67x00_hcd_start(struct usb_hcd *hcd) | |
| { | |
| hcd->uses_new_polling = 1; | |
| hcd->state = HC_STATE_RUNNING; | |
| set_bit(HCD_FLAG_POLL_RH, &hcd->flags); | |
| return 0; | |
| } | |
| /* | |
| * c67x00_hcd_stop: Host controller stop hook | |
| */ | |
| static void c67x00_hcd_stop(struct usb_hcd *hcd) | |
| { | |
| /* Nothing to do */ | |
| } | |
| static int c67x00_hcd_get_frame(struct usb_hcd *hcd) | |
| { | |
| struct c67x00_hcd *c67x00 = hcd_to_c67x00_hcd(hcd); | |
| u16 temp_val; | |
| dev_dbg(c67x00_hcd_dev(c67x00), "%s\n", __func__); | |
| temp_val = c67x00_ll_husb_get_frame(c67x00->sie); | |
| temp_val &= HOST_FRAME_MASK; | |
| return temp_val ? (temp_val - 1) : HOST_FRAME_MASK; | |
| } | |
| static const struct hc_driver c67x00_hc_driver = { | |
| .description = "c67x00-hcd", | |
| .product_desc = "Cypress C67X00 Host Controller", | |
| .hcd_priv_size = sizeof(struct c67x00_hcd), | |
| .flags = HCD_USB11 | HCD_MEMORY, | |
| /* | |
| * basic lifecycle operations | |
| */ | |
| .start = c67x00_hcd_start, | |
| .stop = c67x00_hcd_stop, | |
| /* | |
| * managing i/o requests and associated device resources | |
| */ | |
| .urb_enqueue = c67x00_urb_enqueue, | |
| .urb_dequeue = c67x00_urb_dequeue, | |
| .endpoint_disable = c67x00_endpoint_disable, | |
| /* | |
| * scheduling support | |
| */ | |
| .get_frame_number = c67x00_hcd_get_frame, | |
| /* | |
| * root hub support | |
| */ | |
| .hub_status_data = c67x00_hub_status_data, | |
| .hub_control = c67x00_hub_control, | |
| }; | |
| /* --------------------------------------------------------------------- | |
| * Setup/Teardown routines | |
| */ | |
| int c67x00_hcd_probe(struct c67x00_sie *sie) | |
| { | |
| struct c67x00_hcd *c67x00; | |
| struct usb_hcd *hcd; | |
| unsigned long flags; | |
| int retval; | |
| if (usb_disabled()) | |
| return -ENODEV; | |
| hcd = usb_create_hcd(&c67x00_hc_driver, sie_dev(sie), "c67x00_sie"); | |
| if (!hcd) { | |
| retval = -ENOMEM; | |
| goto err0; | |
| } | |
| c67x00 = hcd_to_c67x00_hcd(hcd); | |
| spin_lock_init(&c67x00->lock); | |
| c67x00->sie = sie; | |
| INIT_LIST_HEAD(&c67x00->list[PIPE_ISOCHRONOUS]); | |
| INIT_LIST_HEAD(&c67x00->list[PIPE_INTERRUPT]); | |
| INIT_LIST_HEAD(&c67x00->list[PIPE_CONTROL]); | |
| INIT_LIST_HEAD(&c67x00->list[PIPE_BULK]); | |
| c67x00->urb_count = 0; | |
| INIT_LIST_HEAD(&c67x00->td_list); | |
| c67x00->td_base_addr = CY_HCD_BUF_ADDR + SIE_TD_OFFSET(sie->sie_num); | |
| c67x00->buf_base_addr = CY_HCD_BUF_ADDR + SIE_BUF_OFFSET(sie->sie_num); | |
| c67x00->max_frame_bw = MAX_FRAME_BW_STD; | |
| c67x00_ll_husb_init_host_port(sie); | |
| init_completion(&c67x00->endpoint_disable); | |
| retval = c67x00_sched_start_scheduler(c67x00); | |
| if (retval) | |
| goto err1; | |
| retval = usb_add_hcd(hcd, 0, 0); | |
| if (retval) { | |
| dev_dbg(sie_dev(sie), "%s: usb_add_hcd returned %d\n", | |
| __func__, retval); | |
| goto err2; | |
| } | |
| device_wakeup_enable(hcd->self.controller); | |
| spin_lock_irqsave(&sie->lock, flags); | |
| sie->private_data = c67x00; | |
| sie->irq = c67x00_hcd_irq; | |
| spin_unlock_irqrestore(&sie->lock, flags); | |
| return retval; | |
| err2: | |
| c67x00_sched_stop_scheduler(c67x00); | |
| err1: | |
| usb_put_hcd(hcd); | |
| err0: | |
| return retval; | |
| } | |
| /* may be called with controller, bus, and devices active */ | |
| void c67x00_hcd_remove(struct c67x00_sie *sie) | |
| { | |
| struct c67x00_hcd *c67x00 = sie->private_data; | |
| struct usb_hcd *hcd = c67x00_hcd_to_hcd(c67x00); | |
| c67x00_sched_stop_scheduler(c67x00); | |
| usb_remove_hcd(hcd); | |
| usb_put_hcd(hcd); | |
| } |