| // SPDX-License-Identifier: GPL-2.0-or-later | |
| /* | |
| * battery.c - ACPI Battery Driver (Revision: 2.0) | |
| * | |
| * Copyright (C) 2007 Alexey Starikovskiy <astarikovskiy@suse.de> | |
| * Copyright (C) 2004-2007 Vladimir Lebedev <vladimir.p.lebedev@intel.com> | |
| * Copyright (C) 2001, 2002 Andy Grover <andrew.grover@intel.com> | |
| * Copyright (C) 2001, 2002 Paul Diefenbaugh <paul.s.diefenbaugh@intel.com> | |
| */ | |
| #define pr_fmt(fmt) "ACPI: battery: " fmt | |
| #include <linux/delay.h> | |
| #include <linux/dmi.h> | |
| #include <linux/jiffies.h> | |
| #include <linux/kernel.h> | |
| #include <linux/list.h> | |
| #include <linux/module.h> | |
| #include <linux/mutex.h> | |
| #include <linux/platform_device.h> | |
| #include <linux/slab.h> | |
| #include <linux/suspend.h> | |
| #include <linux/types.h> | |
| #include <linux/unaligned.h> | |
| #include <linux/acpi.h> | |
| #include <linux/power_supply.h> | |
| #include <acpi/battery.h> | |
| #define ACPI_BATTERY_VALUE_UNKNOWN 0xFFFFFFFF | |
| #define ACPI_BATTERY_CAPACITY_VALID(capacity) \ | |
| ((capacity) != 0 && (capacity) != ACPI_BATTERY_VALUE_UNKNOWN) | |
| /* Battery power unit: 0 means mW, 1 means mA */ | |
| #define ACPI_BATTERY_POWER_UNIT_MA 1 | |
| #define ACPI_BATTERY_STATE_DISCHARGING 0x1 | |
| #define ACPI_BATTERY_STATE_CHARGING 0x2 | |
| #define ACPI_BATTERY_STATE_CRITICAL 0x4 | |
| #define ACPI_BATTERY_STATE_CHARGE_LIMITING 0x8 | |
| #define MAX_STRING_LENGTH 64 | |
| MODULE_AUTHOR("Paul Diefenbaugh"); | |
| MODULE_AUTHOR("Alexey Starikovskiy <astarikovskiy@suse.de>"); | |
| MODULE_DESCRIPTION("ACPI Battery Driver"); | |
| MODULE_LICENSE("GPL"); | |
| static int battery_bix_broken_package; | |
| static int battery_notification_delay_ms; | |
| static int battery_ac_is_broken; | |
| static unsigned int cache_time = 1000; | |
| module_param(cache_time, uint, 0644); | |
| MODULE_PARM_DESC(cache_time, "cache time in milliseconds"); | |
| static const struct acpi_device_id battery_device_ids[] = { | |
| {"PNP0C0A", 0}, | |
| /* Microsoft Surface Go 3 */ | |
| {"MSHW0146", 0}, | |
| {"", 0}, | |
| }; | |
| MODULE_DEVICE_TABLE(acpi, battery_device_ids); | |
| enum { | |
| ACPI_BATTERY_ALARM_PRESENT, | |
| ACPI_BATTERY_XINFO_PRESENT, | |
| ACPI_BATTERY_QUIRK_PERCENTAGE_CAPACITY, | |
| /* On Lenovo Thinkpad models from 2010 and 2011, the power unit | |
| * switches between mWh and mAh depending on whether the system | |
| * is running on battery or not. When mAh is the unit, most | |
| * reported values are incorrect and need to be adjusted by | |
| * 10000/design_voltage. Verified on x201, t410, t410s, and x220. | |
| * Pre-2010 and 2012 models appear to always report in mWh and | |
| * are thus unaffected (tested with t42, t61, t500, x200, x300, | |
| * and x230). Also, in mid-2012 Lenovo issued a BIOS update for | |
| * the 2011 models that fixes the issue (tested on x220 with a | |
| * post-1.29 BIOS), but as of Nov. 2012, no such update is | |
| * available for the 2010 models. | |
| */ | |
| ACPI_BATTERY_QUIRK_THINKPAD_MAH, | |
| /* for batteries reporting current capacity with design capacity | |
| * on a full charge, but showing degradation in full charge cap. | |
| */ | |
| ACPI_BATTERY_QUIRK_DEGRADED_FULL_CHARGE, | |
| }; | |
| struct acpi_battery { | |
| struct mutex update_lock; | |
| struct power_supply *bat; | |
| struct power_supply_desc bat_desc; | |
| struct acpi_device *device; | |
| struct device *phys_dev; | |
| struct notifier_block pm_nb; | |
| struct list_head list; | |
| unsigned long update_time; | |
| int revision; | |
| int rate_now; | |
| int capacity_now; | |
| int voltage_now; | |
| int design_capacity; | |
| int full_charge_capacity; | |
| int technology; | |
| int design_voltage; | |
| int design_capacity_warning; | |
| int design_capacity_low; | |
| int cycle_count; | |
| int measurement_accuracy; | |
| int max_sampling_time; | |
| int min_sampling_time; | |
| int max_averaging_interval; | |
| int min_averaging_interval; | |
| int capacity_granularity_1; | |
| int capacity_granularity_2; | |
| int alarm; | |
| char model_number[MAX_STRING_LENGTH]; | |
| char serial_number[MAX_STRING_LENGTH]; | |
| char type[MAX_STRING_LENGTH]; | |
| char oem_info[MAX_STRING_LENGTH]; | |
| int state; | |
| int power_unit; | |
| unsigned long flags; | |
| }; | |
| #define to_acpi_battery(x) power_supply_get_drvdata(x) | |
| static inline int acpi_battery_present(struct acpi_battery *battery) | |
| { | |
| return battery->device->status.battery_present; | |
| } | |
| static int acpi_battery_technology(struct acpi_battery *battery) | |
| { | |
| if (!strcasecmp("NiCd", battery->type)) | |
| return POWER_SUPPLY_TECHNOLOGY_NiCd; | |
| if (!strcasecmp("NiMH", battery->type)) | |
| return POWER_SUPPLY_TECHNOLOGY_NiMH; | |
| if (!strcasecmp("LION", battery->type)) | |
| return POWER_SUPPLY_TECHNOLOGY_LION; | |
| if (!strncasecmp("LI-ION", battery->type, 6)) | |
| return POWER_SUPPLY_TECHNOLOGY_LION; | |
| if (!strcasecmp("LiP", battery->type)) | |
| return POWER_SUPPLY_TECHNOLOGY_LIPO; | |
| return POWER_SUPPLY_TECHNOLOGY_UNKNOWN; | |
| } | |
| static int acpi_battery_get_state(struct acpi_battery *battery); | |
| static int acpi_battery_is_charged(struct acpi_battery *battery) | |
| { | |
| /* charging, discharging, critical low or charge limited */ | |
| if (battery->state != 0) | |
| return 0; | |
| /* battery not reporting charge */ | |
| if (battery->capacity_now == ACPI_BATTERY_VALUE_UNKNOWN || | |
| battery->capacity_now == 0) | |
| return 0; | |
| /* good batteries update full_charge as the batteries degrade */ | |
| if (battery->full_charge_capacity == battery->capacity_now) | |
| return 1; | |
| /* fallback to using design values for broken batteries */ | |
| if (battery->design_capacity <= battery->capacity_now) | |
| return 1; | |
| /* we don't do any sort of metric based on percentages */ | |
| return 0; | |
| } | |
| static bool acpi_battery_is_degraded(struct acpi_battery *battery) | |
| { | |
| return ACPI_BATTERY_CAPACITY_VALID(battery->full_charge_capacity) && | |
| ACPI_BATTERY_CAPACITY_VALID(battery->design_capacity) && | |
| battery->full_charge_capacity < battery->design_capacity; | |
| } | |
| static int acpi_battery_handle_discharging(struct acpi_battery *battery) | |
| { | |
| /* | |
| * Some devices wrongly report discharging if the battery's charge level | |
| * was above the device's start charging threshold atm the AC adapter | |
| * was plugged in and the device thus did not start a new charge cycle. | |
| */ | |
| if ((battery_ac_is_broken || power_supply_is_system_supplied()) && | |
| battery->rate_now == 0) | |
| return POWER_SUPPLY_STATUS_NOT_CHARGING; | |
| return POWER_SUPPLY_STATUS_DISCHARGING; | |
| } | |
| static int acpi_battery_get_property(struct power_supply *psy, | |
| enum power_supply_property psp, | |
| union power_supply_propval *val) | |
| { | |
| int full_capacity = ACPI_BATTERY_VALUE_UNKNOWN, ret = 0; | |
| struct acpi_battery *battery = to_acpi_battery(psy); | |
| if (acpi_battery_present(battery)) { | |
| /* run battery update only if it is present */ | |
| acpi_battery_get_state(battery); | |
| } else if (psp != POWER_SUPPLY_PROP_PRESENT) | |
| return -ENODEV; | |
| switch (psp) { | |
| case POWER_SUPPLY_PROP_STATUS: | |
| if (battery->state & ACPI_BATTERY_STATE_DISCHARGING) | |
| val->intval = acpi_battery_handle_discharging(battery); | |
| else if (battery->state & ACPI_BATTERY_STATE_CHARGING) | |
| /* Validate the status by checking the current. */ | |
| if (battery->rate_now != ACPI_BATTERY_VALUE_UNKNOWN && | |
| battery->rate_now == 0) { | |
| /* On charge but no current (0W/0mA). */ | |
| val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING; | |
| } else { | |
| val->intval = POWER_SUPPLY_STATUS_CHARGING; | |
| } | |
| else if (battery->state & ACPI_BATTERY_STATE_CHARGE_LIMITING) | |
| val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING; | |
| else if (acpi_battery_is_charged(battery)) | |
| val->intval = POWER_SUPPLY_STATUS_FULL; | |
| else | |
| val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING; | |
| break; | |
| case POWER_SUPPLY_PROP_PRESENT: | |
| val->intval = acpi_battery_present(battery); | |
| break; | |
| case POWER_SUPPLY_PROP_TECHNOLOGY: | |
| val->intval = acpi_battery_technology(battery); | |
| break; | |
| case POWER_SUPPLY_PROP_CYCLE_COUNT: | |
| val->intval = battery->cycle_count; | |
| break; | |
| case POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN: | |
| if (battery->design_voltage == ACPI_BATTERY_VALUE_UNKNOWN) | |
| ret = -ENODEV; | |
| else | |
| val->intval = battery->design_voltage * 1000; | |
| break; | |
| case POWER_SUPPLY_PROP_VOLTAGE_NOW: | |
| if (battery->voltage_now == ACPI_BATTERY_VALUE_UNKNOWN) | |
| ret = -ENODEV; | |
| else | |
| val->intval = battery->voltage_now * 1000; | |
| break; | |
| case POWER_SUPPLY_PROP_CURRENT_NOW: | |
| case POWER_SUPPLY_PROP_POWER_NOW: | |
| if (battery->rate_now == ACPI_BATTERY_VALUE_UNKNOWN) | |
| ret = -ENODEV; | |
| else | |
| val->intval = battery->rate_now * 1000; | |
| break; | |
| case POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN: | |
| case POWER_SUPPLY_PROP_ENERGY_FULL_DESIGN: | |
| if (!ACPI_BATTERY_CAPACITY_VALID(battery->design_capacity)) | |
| ret = -ENODEV; | |
| else | |
| val->intval = battery->design_capacity * 1000; | |
| break; | |
| case POWER_SUPPLY_PROP_CHARGE_FULL: | |
| case POWER_SUPPLY_PROP_ENERGY_FULL: | |
| if (!ACPI_BATTERY_CAPACITY_VALID(battery->full_charge_capacity)) | |
| ret = -ENODEV; | |
| else | |
| val->intval = battery->full_charge_capacity * 1000; | |
| break; | |
| case POWER_SUPPLY_PROP_CHARGE_NOW: | |
| case POWER_SUPPLY_PROP_ENERGY_NOW: | |
| if (battery->capacity_now == ACPI_BATTERY_VALUE_UNKNOWN) | |
| ret = -ENODEV; | |
| else | |
| val->intval = battery->capacity_now * 1000; | |
| break; | |
| case POWER_SUPPLY_PROP_CAPACITY: | |
| if (ACPI_BATTERY_CAPACITY_VALID(battery->full_charge_capacity)) | |
| full_capacity = battery->full_charge_capacity; | |
| else if (ACPI_BATTERY_CAPACITY_VALID(battery->design_capacity)) | |
| full_capacity = battery->design_capacity; | |
| if (battery->capacity_now == ACPI_BATTERY_VALUE_UNKNOWN || | |
| full_capacity == ACPI_BATTERY_VALUE_UNKNOWN) | |
| ret = -ENODEV; | |
| else | |
| val->intval = DIV_ROUND_CLOSEST_ULL(battery->capacity_now * 100ULL, | |
| full_capacity); | |
| break; | |
| case POWER_SUPPLY_PROP_CAPACITY_LEVEL: | |
| if (battery->state & ACPI_BATTERY_STATE_CRITICAL) | |
| val->intval = POWER_SUPPLY_CAPACITY_LEVEL_CRITICAL; | |
| else if (test_bit(ACPI_BATTERY_ALARM_PRESENT, &battery->flags) && | |
| (battery->capacity_now <= battery->alarm)) | |
| val->intval = POWER_SUPPLY_CAPACITY_LEVEL_LOW; | |
| else if (acpi_battery_is_charged(battery)) | |
| val->intval = POWER_SUPPLY_CAPACITY_LEVEL_FULL; | |
| else | |
| val->intval = POWER_SUPPLY_CAPACITY_LEVEL_NORMAL; | |
| break; | |
| case POWER_SUPPLY_PROP_MODEL_NAME: | |
| val->strval = battery->model_number; | |
| break; | |
| case POWER_SUPPLY_PROP_MANUFACTURER: | |
| val->strval = battery->oem_info; | |
| break; | |
| case POWER_SUPPLY_PROP_SERIAL_NUMBER: | |
| val->strval = battery->serial_number; | |
| break; | |
| default: | |
| ret = -EINVAL; | |
| } | |
| return ret; | |
| } | |
| static const enum power_supply_property charge_battery_props[] = { | |
| POWER_SUPPLY_PROP_STATUS, | |
| POWER_SUPPLY_PROP_PRESENT, | |
| POWER_SUPPLY_PROP_TECHNOLOGY, | |
| POWER_SUPPLY_PROP_CYCLE_COUNT, | |
| POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN, | |
| POWER_SUPPLY_PROP_VOLTAGE_NOW, | |
| POWER_SUPPLY_PROP_CURRENT_NOW, | |
| POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN, | |
| POWER_SUPPLY_PROP_CHARGE_FULL, | |
| POWER_SUPPLY_PROP_CHARGE_NOW, | |
| POWER_SUPPLY_PROP_CAPACITY, | |
| POWER_SUPPLY_PROP_CAPACITY_LEVEL, | |
| POWER_SUPPLY_PROP_MODEL_NAME, | |
| POWER_SUPPLY_PROP_MANUFACTURER, | |
| POWER_SUPPLY_PROP_SERIAL_NUMBER, | |
| }; | |
| static const enum power_supply_property charge_battery_full_cap_broken_props[] = { | |
| POWER_SUPPLY_PROP_STATUS, | |
| POWER_SUPPLY_PROP_PRESENT, | |
| POWER_SUPPLY_PROP_TECHNOLOGY, | |
| POWER_SUPPLY_PROP_CYCLE_COUNT, | |
| POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN, | |
| POWER_SUPPLY_PROP_VOLTAGE_NOW, | |
| POWER_SUPPLY_PROP_CURRENT_NOW, | |
| POWER_SUPPLY_PROP_CHARGE_NOW, | |
| POWER_SUPPLY_PROP_MODEL_NAME, | |
| POWER_SUPPLY_PROP_MANUFACTURER, | |
| POWER_SUPPLY_PROP_SERIAL_NUMBER, | |
| }; | |
| static const enum power_supply_property energy_battery_props[] = { | |
| POWER_SUPPLY_PROP_STATUS, | |
| POWER_SUPPLY_PROP_PRESENT, | |
| POWER_SUPPLY_PROP_TECHNOLOGY, | |
| POWER_SUPPLY_PROP_CYCLE_COUNT, | |
| POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN, | |
| POWER_SUPPLY_PROP_VOLTAGE_NOW, | |
| POWER_SUPPLY_PROP_POWER_NOW, | |
| POWER_SUPPLY_PROP_ENERGY_FULL_DESIGN, | |
| POWER_SUPPLY_PROP_ENERGY_FULL, | |
| POWER_SUPPLY_PROP_ENERGY_NOW, | |
| POWER_SUPPLY_PROP_CAPACITY, | |
| POWER_SUPPLY_PROP_CAPACITY_LEVEL, | |
| POWER_SUPPLY_PROP_MODEL_NAME, | |
| POWER_SUPPLY_PROP_MANUFACTURER, | |
| POWER_SUPPLY_PROP_SERIAL_NUMBER, | |
| }; | |
| static const enum power_supply_property energy_battery_full_cap_broken_props[] = { | |
| POWER_SUPPLY_PROP_STATUS, | |
| POWER_SUPPLY_PROP_PRESENT, | |
| POWER_SUPPLY_PROP_TECHNOLOGY, | |
| POWER_SUPPLY_PROP_CYCLE_COUNT, | |
| POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN, | |
| POWER_SUPPLY_PROP_VOLTAGE_NOW, | |
| POWER_SUPPLY_PROP_POWER_NOW, | |
| POWER_SUPPLY_PROP_ENERGY_NOW, | |
| POWER_SUPPLY_PROP_MODEL_NAME, | |
| POWER_SUPPLY_PROP_MANUFACTURER, | |
| POWER_SUPPLY_PROP_SERIAL_NUMBER, | |
| }; | |
| /* Battery Management */ | |
| struct acpi_offsets { | |
| size_t offset; /* offset inside struct acpi_sbs_battery */ | |
| u8 mode; /* int or string? */ | |
| }; | |
| static const struct acpi_offsets state_offsets[] = { | |
| {offsetof(struct acpi_battery, state), 0}, | |
| {offsetof(struct acpi_battery, rate_now), 0}, | |
| {offsetof(struct acpi_battery, capacity_now), 0}, | |
| {offsetof(struct acpi_battery, voltage_now), 0}, | |
| }; | |
| static const struct acpi_offsets info_offsets[] = { | |
| {offsetof(struct acpi_battery, power_unit), 0}, | |
| {offsetof(struct acpi_battery, design_capacity), 0}, | |
| {offsetof(struct acpi_battery, full_charge_capacity), 0}, | |
| {offsetof(struct acpi_battery, technology), 0}, | |
| {offsetof(struct acpi_battery, design_voltage), 0}, | |
| {offsetof(struct acpi_battery, design_capacity_warning), 0}, | |
| {offsetof(struct acpi_battery, design_capacity_low), 0}, | |
| {offsetof(struct acpi_battery, capacity_granularity_1), 0}, | |
| {offsetof(struct acpi_battery, capacity_granularity_2), 0}, | |
| {offsetof(struct acpi_battery, model_number), 1}, | |
| {offsetof(struct acpi_battery, serial_number), 1}, | |
| {offsetof(struct acpi_battery, type), 1}, | |
| {offsetof(struct acpi_battery, oem_info), 1}, | |
| }; | |
| static const struct acpi_offsets extended_info_offsets[] = { | |
| {offsetof(struct acpi_battery, revision), 0}, | |
| {offsetof(struct acpi_battery, power_unit), 0}, | |
| {offsetof(struct acpi_battery, design_capacity), 0}, | |
| {offsetof(struct acpi_battery, full_charge_capacity), 0}, | |
| {offsetof(struct acpi_battery, technology), 0}, | |
| {offsetof(struct acpi_battery, design_voltage), 0}, | |
| {offsetof(struct acpi_battery, design_capacity_warning), 0}, | |
| {offsetof(struct acpi_battery, design_capacity_low), 0}, | |
| {offsetof(struct acpi_battery, cycle_count), 0}, | |
| {offsetof(struct acpi_battery, measurement_accuracy), 0}, | |
| {offsetof(struct acpi_battery, max_sampling_time), 0}, | |
| {offsetof(struct acpi_battery, min_sampling_time), 0}, | |
| {offsetof(struct acpi_battery, max_averaging_interval), 0}, | |
| {offsetof(struct acpi_battery, min_averaging_interval), 0}, | |
| {offsetof(struct acpi_battery, capacity_granularity_1), 0}, | |
| {offsetof(struct acpi_battery, capacity_granularity_2), 0}, | |
| {offsetof(struct acpi_battery, model_number), 1}, | |
| {offsetof(struct acpi_battery, serial_number), 1}, | |
| {offsetof(struct acpi_battery, type), 1}, | |
| {offsetof(struct acpi_battery, oem_info), 1}, | |
| }; | |
| static int extract_package(struct acpi_battery *battery, | |
| union acpi_object *package, | |
| const struct acpi_offsets *offsets, int num) | |
| { | |
| int i; | |
| union acpi_object *element; | |
| if (package->type != ACPI_TYPE_PACKAGE) | |
| return -EFAULT; | |
| for (i = 0; i < num; ++i) { | |
| if (package->package.count <= i) | |
| return -EFAULT; | |
| element = &package->package.elements[i]; | |
| if (offsets[i].mode) { | |
| u8 *ptr = (u8 *)battery + offsets[i].offset; | |
| u32 len = MAX_STRING_LENGTH; | |
| switch (element->type) { | |
| case ACPI_TYPE_BUFFER: | |
| if (len > element->buffer.length + 1) | |
| len = element->buffer.length + 1; | |
| fallthrough; | |
| case ACPI_TYPE_STRING: | |
| strscpy(ptr, element->string.pointer, len); | |
| break; | |
| case ACPI_TYPE_INTEGER: | |
| strscpy(ptr, (u8 *)&element->integer.value, sizeof(u64) + 1); | |
| break; | |
| default: | |
| *ptr = 0; /* don't have value */ | |
| } | |
| } else { | |
| int *x = (int *)((u8 *)battery + offsets[i].offset); | |
| *x = (element->type == ACPI_TYPE_INTEGER) ? | |
| element->integer.value : -1; | |
| } | |
| } | |
| return 0; | |
| } | |
| static int acpi_battery_get_status(struct acpi_battery *battery) | |
| { | |
| if (acpi_bus_get_status(battery->device)) { | |
| acpi_handle_info(battery->device->handle, | |
| "_STA evaluation failed\n"); | |
| return -ENODEV; | |
| } | |
| return 0; | |
| } | |
| static int extract_battery_info(const int use_bix, | |
| struct acpi_battery *battery, | |
| const struct acpi_buffer *buffer) | |
| { | |
| int result = -EFAULT; | |
| if (use_bix && battery_bix_broken_package) | |
| result = extract_package(battery, buffer->pointer, | |
| extended_info_offsets + 1, | |
| ARRAY_SIZE(extended_info_offsets) - 1); | |
| else if (use_bix) | |
| result = extract_package(battery, buffer->pointer, | |
| extended_info_offsets, | |
| ARRAY_SIZE(extended_info_offsets)); | |
| else | |
| result = extract_package(battery, buffer->pointer, | |
| info_offsets, ARRAY_SIZE(info_offsets)); | |
| if (test_bit(ACPI_BATTERY_QUIRK_PERCENTAGE_CAPACITY, &battery->flags)) | |
| battery->full_charge_capacity = battery->design_capacity; | |
| if (test_bit(ACPI_BATTERY_QUIRK_THINKPAD_MAH, &battery->flags) && | |
| battery->power_unit && battery->design_voltage) { | |
| battery->design_capacity = battery->design_capacity * | |
| 10000 / battery->design_voltage; | |
| battery->full_charge_capacity = battery->full_charge_capacity * | |
| 10000 / battery->design_voltage; | |
| battery->design_capacity_warning = | |
| battery->design_capacity_warning * | |
| 10000 / battery->design_voltage; | |
| /* Curiously, design_capacity_low, unlike the rest of them, | |
| * is correct. | |
| */ | |
| /* capacity_granularity_* equal 1 on the systems tested, so | |
| * it's impossible to tell if they would need an adjustment | |
| * or not if their values were higher. | |
| */ | |
| } | |
| if (test_bit(ACPI_BATTERY_QUIRK_DEGRADED_FULL_CHARGE, &battery->flags) && | |
| battery->capacity_now > battery->full_charge_capacity) | |
| battery->capacity_now = battery->full_charge_capacity; | |
| return result; | |
| } | |
| static int acpi_battery_get_info(struct acpi_battery *battery) | |
| { | |
| const int xinfo = test_bit(ACPI_BATTERY_XINFO_PRESENT, &battery->flags); | |
| int use_bix; | |
| int result = -ENODEV; | |
| if (!acpi_battery_present(battery)) | |
| return 0; | |
| for (use_bix = xinfo ? 1 : 0; use_bix >= 0; use_bix--) { | |
| struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL }; | |
| acpi_status status = AE_ERROR; | |
| status = acpi_evaluate_object(battery->device->handle, | |
| use_bix ? "_BIX":"_BIF", | |
| NULL, &buffer); | |
| if (ACPI_FAILURE(status)) { | |
| acpi_handle_info(battery->device->handle, | |
| "%s evaluation failed: %s\n", | |
| use_bix ? "_BIX":"_BIF", | |
| acpi_format_exception(status)); | |
| } else { | |
| result = extract_battery_info(use_bix, | |
| battery, | |
| &buffer); | |
| kfree(buffer.pointer); | |
| break; | |
| } | |
| } | |
| if (!result && !use_bix && xinfo) | |
| pr_warn(FW_BUG "The _BIX method is broken, using _BIF.\n"); | |
| return result; | |
| } | |
| static int acpi_battery_get_state(struct acpi_battery *battery) | |
| { | |
| int result = 0; | |
| acpi_status status = 0; | |
| struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL }; | |
| if (!acpi_battery_present(battery)) | |
| return 0; | |
| if (battery->update_time && | |
| time_before(jiffies, battery->update_time + | |
| msecs_to_jiffies(cache_time))) | |
| return 0; | |
| status = acpi_evaluate_object(battery->device->handle, "_BST", | |
| NULL, &buffer); | |
| if (ACPI_FAILURE(status)) { | |
| acpi_handle_info(battery->device->handle, | |
| "_BST evaluation failed: %s", | |
| acpi_format_exception(status)); | |
| return -ENODEV; | |
| } | |
| result = extract_package(battery, buffer.pointer, | |
| state_offsets, ARRAY_SIZE(state_offsets)); | |
| battery->update_time = jiffies; | |
| kfree(buffer.pointer); | |
| /* For buggy DSDTs that report negative 16-bit values for either | |
| * charging or discharging current and/or report 0 as 65536 | |
| * due to bad math. | |
| */ | |
| if (battery->power_unit == ACPI_BATTERY_POWER_UNIT_MA && | |
| battery->rate_now != ACPI_BATTERY_VALUE_UNKNOWN && | |
| (s16)(battery->rate_now) < 0) { | |
| battery->rate_now = abs((s16)battery->rate_now); | |
| pr_warn_once(FW_BUG "(dis)charge rate invalid.\n"); | |
| } | |
| if (test_bit(ACPI_BATTERY_QUIRK_PERCENTAGE_CAPACITY, &battery->flags) | |
| && battery->capacity_now >= 0 && battery->capacity_now <= 100) | |
| battery->capacity_now = (battery->capacity_now * | |
| battery->full_charge_capacity) / 100; | |
| if (test_bit(ACPI_BATTERY_QUIRK_THINKPAD_MAH, &battery->flags) && | |
| battery->power_unit && battery->design_voltage) { | |
| battery->capacity_now = battery->capacity_now * | |
| 10000 / battery->design_voltage; | |
| } | |
| if (test_bit(ACPI_BATTERY_QUIRK_DEGRADED_FULL_CHARGE, &battery->flags) && | |
| battery->capacity_now > battery->full_charge_capacity) | |
| battery->capacity_now = battery->full_charge_capacity; | |
| return result; | |
| } | |
| static int acpi_battery_set_alarm(struct acpi_battery *battery) | |
| { | |
| acpi_status status = 0; | |
| if (!acpi_battery_present(battery) || | |
| !test_bit(ACPI_BATTERY_ALARM_PRESENT, &battery->flags)) | |
| return -ENODEV; | |
| status = acpi_execute_simple_method(battery->device->handle, "_BTP", | |
| battery->alarm); | |
| if (ACPI_FAILURE(status)) | |
| return -ENODEV; | |
| acpi_handle_debug(battery->device->handle, "Alarm set to %d\n", | |
| battery->alarm); | |
| return 0; | |
| } | |
| static int acpi_battery_init_alarm(struct acpi_battery *battery) | |
| { | |
| /* See if alarms are supported, and if so, set default */ | |
| if (!acpi_has_method(battery->device->handle, "_BTP")) { | |
| clear_bit(ACPI_BATTERY_ALARM_PRESENT, &battery->flags); | |
| return 0; | |
| } | |
| set_bit(ACPI_BATTERY_ALARM_PRESENT, &battery->flags); | |
| if (!battery->alarm) | |
| battery->alarm = battery->design_capacity_warning; | |
| return acpi_battery_set_alarm(battery); | |
| } | |
| static ssize_t acpi_battery_alarm_show(struct device *dev, | |
| struct device_attribute *attr, | |
| char *buf) | |
| { | |
| struct acpi_battery *battery = to_acpi_battery(dev_get_drvdata(dev)); | |
| return sysfs_emit(buf, "%d\n", battery->alarm * 1000); | |
| } | |
| static ssize_t acpi_battery_alarm_store(struct device *dev, | |
| struct device_attribute *attr, | |
| const char *buf, size_t count) | |
| { | |
| unsigned long x; | |
| struct acpi_battery *battery = to_acpi_battery(dev_get_drvdata(dev)); | |
| if (sscanf(buf, "%lu\n", &x) == 1) | |
| battery->alarm = x/1000; | |
| if (acpi_battery_present(battery)) | |
| acpi_battery_set_alarm(battery); | |
| return count; | |
| } | |
| static struct device_attribute alarm_attr = { | |
| .attr = {.name = "alarm", .mode = 0644}, | |
| .show = acpi_battery_alarm_show, | |
| .store = acpi_battery_alarm_store, | |
| }; | |
| static struct attribute *acpi_battery_attrs[] = { | |
| &alarm_attr.attr, | |
| NULL | |
| }; | |
| ATTRIBUTE_GROUPS(acpi_battery); | |
| /* | |
| * The Battery Hooking API | |
| * | |
| * This API is used inside other drivers that need to expose | |
| * platform-specific behaviour within the generic driver in a | |
| * generic way. | |
| * | |
| */ | |
| static LIST_HEAD(acpi_battery_list); | |
| static LIST_HEAD(battery_hook_list); | |
| static DEFINE_MUTEX(hook_mutex); | |
| static void battery_hook_unregister_unlocked(struct acpi_battery_hook *hook) | |
| { | |
| struct acpi_battery *battery; | |
| /* | |
| * In order to remove a hook, we first need to | |
| * de-register all the batteries that are registered. | |
| */ | |
| list_for_each_entry(battery, &acpi_battery_list, list) { | |
| if (!hook->remove_battery(battery->bat, hook)) | |
| power_supply_changed(battery->bat); | |
| } | |
| list_del_init(&hook->list); | |
| pr_info("hook unregistered: %s\n", hook->name); | |
| } | |
| void battery_hook_unregister(struct acpi_battery_hook *hook) | |
| { | |
| mutex_lock(&hook_mutex); | |
| /* | |
| * Ignore already unregistered battery hooks. This might happen | |
| * if a battery hook was previously unloaded due to an error when | |
| * adding a new battery. | |
| */ | |
| if (!list_empty(&hook->list)) | |
| battery_hook_unregister_unlocked(hook); | |
| mutex_unlock(&hook_mutex); | |
| } | |
| EXPORT_SYMBOL_GPL(battery_hook_unregister); | |
| void battery_hook_register(struct acpi_battery_hook *hook) | |
| { | |
| struct acpi_battery *battery; | |
| mutex_lock(&hook_mutex); | |
| list_add(&hook->list, &battery_hook_list); | |
| /* | |
| * Now that the driver is registered, we need | |
| * to notify the hook that a battery is available | |
| * for each battery, so that the driver may add | |
| * its attributes. | |
| */ | |
| list_for_each_entry(battery, &acpi_battery_list, list) { | |
| if (hook->add_battery(battery->bat, hook)) { | |
| /* | |
| * If a add-battery returns non-zero, | |
| * the registration of the hook has failed, | |
| * and we will not add it to the list of loaded | |
| * hooks. | |
| */ | |
| pr_err("hook failed to load: %s", hook->name); | |
| battery_hook_unregister_unlocked(hook); | |
| goto end; | |
| } | |
| power_supply_changed(battery->bat); | |
| } | |
| pr_info("new hook: %s\n", hook->name); | |
| end: | |
| mutex_unlock(&hook_mutex); | |
| } | |
| EXPORT_SYMBOL_GPL(battery_hook_register); | |
| static void devm_battery_hook_unregister(void *data) | |
| { | |
| struct acpi_battery_hook *hook = data; | |
| battery_hook_unregister(hook); | |
| } | |
| int devm_battery_hook_register(struct device *dev, struct acpi_battery_hook *hook) | |
| { | |
| battery_hook_register(hook); | |
| return devm_add_action_or_reset(dev, devm_battery_hook_unregister, hook); | |
| } | |
| EXPORT_SYMBOL_GPL(devm_battery_hook_register); | |
| /* | |
| * This function gets called right after the battery sysfs | |
| * attributes have been added, so that the drivers that | |
| * define custom sysfs attributes can add their own. | |
| */ | |
| static void battery_hook_add_battery(struct acpi_battery *battery) | |
| { | |
| struct acpi_battery_hook *hook_node, *tmp; | |
| mutex_lock(&hook_mutex); | |
| INIT_LIST_HEAD(&battery->list); | |
| list_add(&battery->list, &acpi_battery_list); | |
| /* | |
| * Since we added a new battery to the list, we need to | |
| * iterate over the hooks and call add_battery for each | |
| * hook that was registered. This usually happens | |
| * when a battery gets hotplugged or initialized | |
| * during the battery module initialization. | |
| */ | |
| list_for_each_entry_safe(hook_node, tmp, &battery_hook_list, list) { | |
| if (hook_node->add_battery(battery->bat, hook_node)) { | |
| /* | |
| * The notification of the hook has failed, to | |
| * prevent further errors we will unload the hook. | |
| */ | |
| pr_err("error in hook, unloading: %s", | |
| hook_node->name); | |
| battery_hook_unregister_unlocked(hook_node); | |
| } | |
| } | |
| mutex_unlock(&hook_mutex); | |
| } | |
| static void battery_hook_remove_battery(struct acpi_battery *battery) | |
| { | |
| struct acpi_battery_hook *hook; | |
| mutex_lock(&hook_mutex); | |
| /* | |
| * Before removing the hook, we need to remove all | |
| * custom attributes from the battery. | |
| */ | |
| list_for_each_entry(hook, &battery_hook_list, list) { | |
| hook->remove_battery(battery->bat, hook); | |
| } | |
| /* Then, just remove the battery from the list */ | |
| list_del(&battery->list); | |
| mutex_unlock(&hook_mutex); | |
| } | |
| static void __exit battery_hook_exit(void) | |
| { | |
| struct acpi_battery_hook *hook; | |
| struct acpi_battery_hook *ptr; | |
| /* | |
| * At this point, the acpi_bus_unregister_driver() | |
| * has called remove for all batteries. We just | |
| * need to remove the hooks. | |
| */ | |
| list_for_each_entry_safe(hook, ptr, &battery_hook_list, list) { | |
| battery_hook_unregister(hook); | |
| } | |
| mutex_destroy(&hook_mutex); | |
| } | |
| static int sysfs_add_battery(struct acpi_battery *battery) | |
| { | |
| struct power_supply_config psy_cfg = { | |
| .drv_data = battery, | |
| .attr_grp = acpi_battery_groups, | |
| .no_wakeup_source = true, | |
| }; | |
| bool full_cap_broken = false; | |
| if (!ACPI_BATTERY_CAPACITY_VALID(battery->full_charge_capacity) && | |
| !ACPI_BATTERY_CAPACITY_VALID(battery->design_capacity)) | |
| full_cap_broken = true; | |
| if (battery->power_unit == ACPI_BATTERY_POWER_UNIT_MA) { | |
| if (full_cap_broken) { | |
| battery->bat_desc.properties = | |
| charge_battery_full_cap_broken_props; | |
| battery->bat_desc.num_properties = | |
| ARRAY_SIZE(charge_battery_full_cap_broken_props); | |
| } else { | |
| battery->bat_desc.properties = charge_battery_props; | |
| battery->bat_desc.num_properties = | |
| ARRAY_SIZE(charge_battery_props); | |
| } | |
| } else { | |
| if (full_cap_broken) { | |
| battery->bat_desc.properties = | |
| energy_battery_full_cap_broken_props; | |
| battery->bat_desc.num_properties = | |
| ARRAY_SIZE(energy_battery_full_cap_broken_props); | |
| } else { | |
| battery->bat_desc.properties = energy_battery_props; | |
| battery->bat_desc.num_properties = | |
| ARRAY_SIZE(energy_battery_props); | |
| } | |
| } | |
| battery->bat_desc.name = acpi_device_bid(battery->device); | |
| battery->bat_desc.type = POWER_SUPPLY_TYPE_BATTERY; | |
| battery->bat_desc.get_property = acpi_battery_get_property; | |
| battery->bat = power_supply_register(&battery->device->dev, | |
| &battery->bat_desc, &psy_cfg); | |
| if (IS_ERR(battery->bat)) { | |
| int result = PTR_ERR(battery->bat); | |
| battery->bat = NULL; | |
| return result; | |
| } | |
| battery_hook_add_battery(battery); | |
| return 0; | |
| } | |
| static void sysfs_remove_battery(struct acpi_battery *battery) | |
| { | |
| if (!battery->bat) | |
| return; | |
| battery_hook_remove_battery(battery); | |
| power_supply_unregister(battery->bat); | |
| battery->bat = NULL; | |
| } | |
| static void find_battery(const struct dmi_header *dm, void *private) | |
| { | |
| struct acpi_battery *battery = (struct acpi_battery *)private; | |
| /* Note: the hardcoded offsets below have been extracted from | |
| * the source code of dmidecode. | |
| */ | |
| if (dm->type == DMI_ENTRY_PORTABLE_BATTERY && dm->length >= 8) { | |
| const u8 *dmi_data = (const u8 *)(dm + 1); | |
| int dmi_capacity = get_unaligned((const u16 *)(dmi_data + 6)); | |
| if (dm->length >= 18) | |
| dmi_capacity *= dmi_data[17]; | |
| if (battery->design_capacity * battery->design_voltage / 1000 | |
| != dmi_capacity && | |
| battery->design_capacity * 10 == dmi_capacity) | |
| set_bit(ACPI_BATTERY_QUIRK_THINKPAD_MAH, | |
| &battery->flags); | |
| } | |
| } | |
| /* | |
| * According to the ACPI spec, some kinds of primary batteries can | |
| * report percentage battery remaining capacity directly to OS. | |
| * In this case, it reports the Last Full Charged Capacity == 100 | |
| * and BatteryPresentRate == 0xFFFFFFFF. | |
| * | |
| * Now we found some battery reports percentage remaining capacity | |
| * even if it's rechargeable. | |
| * https://bugzilla.kernel.org/show_bug.cgi?id=15979 | |
| * | |
| * Handle this correctly so that they won't break userspace. | |
| */ | |
| static void acpi_battery_quirks(struct acpi_battery *battery) | |
| { | |
| if (test_bit(ACPI_BATTERY_QUIRK_PERCENTAGE_CAPACITY, &battery->flags)) | |
| return; | |
| if (battery->full_charge_capacity == 100 && | |
| battery->rate_now == ACPI_BATTERY_VALUE_UNKNOWN && | |
| battery->capacity_now >= 0 && battery->capacity_now <= 100) { | |
| set_bit(ACPI_BATTERY_QUIRK_PERCENTAGE_CAPACITY, &battery->flags); | |
| battery->full_charge_capacity = battery->design_capacity; | |
| battery->capacity_now = (battery->capacity_now * | |
| battery->full_charge_capacity) / 100; | |
| } | |
| if (test_bit(ACPI_BATTERY_QUIRK_THINKPAD_MAH, &battery->flags)) | |
| return; | |
| if (battery->power_unit && dmi_name_in_vendors("LENOVO")) { | |
| const char *s; | |
| s = dmi_get_system_info(DMI_PRODUCT_VERSION); | |
| if (s && !strncasecmp(s, "ThinkPad", 8)) { | |
| dmi_walk(find_battery, battery); | |
| if (test_bit(ACPI_BATTERY_QUIRK_THINKPAD_MAH, | |
| &battery->flags) && | |
| battery->design_voltage) { | |
| battery->design_capacity = | |
| battery->design_capacity * | |
| 10000 / battery->design_voltage; | |
| battery->full_charge_capacity = | |
| battery->full_charge_capacity * | |
| 10000 / battery->design_voltage; | |
| battery->design_capacity_warning = | |
| battery->design_capacity_warning * | |
| 10000 / battery->design_voltage; | |
| battery->capacity_now = battery->capacity_now * | |
| 10000 / battery->design_voltage; | |
| } | |
| } | |
| } | |
| if (test_bit(ACPI_BATTERY_QUIRK_DEGRADED_FULL_CHARGE, &battery->flags)) | |
| return; | |
| if (acpi_battery_is_degraded(battery) && | |
| battery->capacity_now > battery->full_charge_capacity) { | |
| set_bit(ACPI_BATTERY_QUIRK_DEGRADED_FULL_CHARGE, &battery->flags); | |
| battery->capacity_now = battery->full_charge_capacity; | |
| } | |
| } | |
| static int acpi_battery_update(struct acpi_battery *battery, bool resume) | |
| { | |
| int result = acpi_battery_get_status(battery); | |
| if (result) | |
| return result; | |
| if (!acpi_battery_present(battery)) { | |
| sysfs_remove_battery(battery); | |
| battery->update_time = 0; | |
| return 0; | |
| } | |
| if (resume) | |
| return 0; | |
| if (!battery->update_time) { | |
| result = acpi_battery_get_info(battery); | |
| if (result) | |
| return result; | |
| acpi_battery_init_alarm(battery); | |
| } | |
| result = acpi_battery_get_state(battery); | |
| if (result) | |
| return result; | |
| acpi_battery_quirks(battery); | |
| if (!battery->bat) { | |
| result = sysfs_add_battery(battery); | |
| if (result) | |
| return result; | |
| } | |
| /* | |
| * Wakeup the system if battery is critical low | |
| * or lower than the alarm level | |
| */ | |
| if ((battery->state & ACPI_BATTERY_STATE_CRITICAL) || | |
| (test_bit(ACPI_BATTERY_ALARM_PRESENT, &battery->flags) && | |
| (battery->capacity_now <= battery->alarm))) | |
| acpi_pm_wakeup_event(battery->phys_dev); | |
| return result; | |
| } | |
| static void acpi_battery_refresh(struct acpi_battery *battery) | |
| { | |
| int power_unit; | |
| if (!battery->bat) | |
| return; | |
| power_unit = battery->power_unit; | |
| acpi_battery_get_info(battery); | |
| if (power_unit == battery->power_unit) | |
| return; | |
| /* The battery has changed its reporting units. */ | |
| sysfs_remove_battery(battery); | |
| sysfs_add_battery(battery); | |
| } | |
| /* Driver Interface */ | |
| static void acpi_battery_notify(acpi_handle handle, u32 event, void *data) | |
| { | |
| struct acpi_battery *battery = data; | |
| struct acpi_device *device = battery->device; | |
| struct power_supply *old; | |
| guard(mutex)(&battery->update_lock); | |
| old = battery->bat; | |
| /* | |
| * On Acer Aspire V5-573G notifications are sometimes triggered too | |
| * early. For example, when AC is unplugged and notification is | |
| * triggered, battery state is still reported as "Full", and changes to | |
| * "Discharging" only after short delay, without any notification. | |
| */ | |
| if (battery_notification_delay_ms > 0) | |
| msleep(battery_notification_delay_ms); | |
| if (event == ACPI_BATTERY_NOTIFY_INFO) | |
| acpi_battery_refresh(battery); | |
| acpi_battery_update(battery, false); | |
| acpi_bus_generate_netlink_event(ACPI_BATTERY_CLASS, | |
| dev_name(&device->dev), event, | |
| acpi_battery_present(battery)); | |
| acpi_notifier_call_chain(ACPI_BATTERY_CLASS, acpi_device_bid(device), | |
| event, acpi_battery_present(battery)); | |
| /* acpi_battery_update could remove power_supply object */ | |
| if (old && battery->bat) | |
| power_supply_changed(battery->bat); | |
| } | |
| static int battery_notify(struct notifier_block *nb, | |
| unsigned long mode, void *_unused) | |
| { | |
| struct acpi_battery *battery = container_of(nb, struct acpi_battery, | |
| pm_nb); | |
| if (mode == PM_POST_SUSPEND || mode == PM_POST_HIBERNATION) { | |
| guard(mutex)(&battery->update_lock); | |
| if (!acpi_battery_present(battery)) | |
| return 0; | |
| if (battery->bat) { | |
| acpi_battery_refresh(battery); | |
| } else { | |
| int result; | |
| result = acpi_battery_get_info(battery); | |
| if (result) | |
| return result; | |
| result = sysfs_add_battery(battery); | |
| if (result) | |
| return result; | |
| } | |
| acpi_battery_init_alarm(battery); | |
| acpi_battery_get_state(battery); | |
| } | |
| return 0; | |
| } | |
| static int __init | |
| battery_bix_broken_package_quirk(const struct dmi_system_id *d) | |
| { | |
| battery_bix_broken_package = 1; | |
| return 0; | |
| } | |
| static int __init | |
| battery_notification_delay_quirk(const struct dmi_system_id *d) | |
| { | |
| battery_notification_delay_ms = 1000; | |
| return 0; | |
| } | |
| static int __init | |
| battery_ac_is_broken_quirk(const struct dmi_system_id *d) | |
| { | |
| battery_ac_is_broken = 1; | |
| return 0; | |
| } | |
| static const struct dmi_system_id bat_dmi_table[] __initconst = { | |
| { | |
| /* NEC LZ750/LS */ | |
| .callback = battery_bix_broken_package_quirk, | |
| .matches = { | |
| DMI_MATCH(DMI_SYS_VENDOR, "NEC"), | |
| DMI_MATCH(DMI_PRODUCT_NAME, "PC-LZ750LS"), | |
| }, | |
| }, | |
| { | |
| /* Acer Aspire V5-573G */ | |
| .callback = battery_notification_delay_quirk, | |
| .matches = { | |
| DMI_MATCH(DMI_SYS_VENDOR, "Acer"), | |
| DMI_MATCH(DMI_PRODUCT_NAME, "Aspire V5-573G"), | |
| }, | |
| }, | |
| { | |
| /* Point of View mobii wintab p800w */ | |
| .callback = battery_ac_is_broken_quirk, | |
| .matches = { | |
| DMI_MATCH(DMI_BOARD_VENDOR, "AMI Corporation"), | |
| DMI_MATCH(DMI_BOARD_NAME, "Aptio CRB"), | |
| DMI_MATCH(DMI_BIOS_VERSION, "3BAIR1013"), | |
| /* Above matches are too generic, add bios-date match */ | |
| DMI_MATCH(DMI_BIOS_DATE, "08/22/2014"), | |
| }, | |
| }, | |
| { | |
| /* Microsoft Surface Go 3 */ | |
| .callback = battery_notification_delay_quirk, | |
| .matches = { | |
| DMI_MATCH(DMI_SYS_VENDOR, "Microsoft Corporation"), | |
| DMI_MATCH(DMI_PRODUCT_NAME, "Surface Go 3"), | |
| }, | |
| }, | |
| {}, | |
| }; | |
| static void acpi_battery_wakeup_cleanup(void *data) | |
| { | |
| device_init_wakeup(data, false); | |
| } | |
| static int devm_acpi_battery_init_wakeup(struct device *dev) | |
| { | |
| device_init_wakeup(dev, true); | |
| return devm_add_action_or_reset(dev, acpi_battery_wakeup_cleanup, dev); | |
| } | |
| static void sysfs_battery_cleanup(void *data) | |
| { | |
| struct acpi_battery *battery = data; | |
| guard(mutex)(&battery->update_lock); | |
| sysfs_remove_battery(battery); | |
| } | |
| /* | |
| * Some machines'(E,G Lenovo Z480) ECs are not stable | |
| * during boot up and this causes battery driver fails to be | |
| * probed due to failure of getting battery information | |
| * from EC sometimes. After several retries, the operation | |
| * may work. So add retry code here and 20ms sleep between | |
| * every retries. | |
| */ | |
| static int devm_acpi_battery_update_retry(struct device *dev, | |
| struct acpi_battery *battery) | |
| { | |
| int retry, ret; | |
| ret = devm_add_action(dev, sysfs_battery_cleanup, battery); | |
| if (ret) | |
| return ret; | |
| guard(mutex)(&battery->update_lock); | |
| for (retry = 5; retry; retry--) { | |
| ret = acpi_battery_update(battery, false); | |
| if (!ret) | |
| break; | |
| msleep(20); | |
| } | |
| return ret; | |
| } | |
| static int acpi_battery_probe(struct platform_device *pdev) | |
| { | |
| struct device *dev = &pdev->dev; | |
| struct acpi_battery *battery; | |
| struct acpi_device *device; | |
| int result; | |
| device = ACPI_COMPANION(dev); | |
| if (!device) | |
| return -ENODEV; | |
| if (device->dep_unmet) | |
| return -EPROBE_DEFER; | |
| battery = devm_kzalloc(dev, sizeof(*battery), GFP_KERNEL); | |
| if (!battery) | |
| return -ENOMEM; | |
| platform_set_drvdata(pdev, battery); | |
| battery->phys_dev = &pdev->dev; | |
| battery->device = device; | |
| result = devm_mutex_init(dev, &battery->update_lock); | |
| if (result) | |
| return result; | |
| if (acpi_has_method(battery->device->handle, "_BIX")) | |
| set_bit(ACPI_BATTERY_XINFO_PRESENT, &battery->flags); | |
| result = devm_acpi_battery_update_retry(dev, battery); | |
| if (result) | |
| return result; | |
| pr_info("Slot [%s] (battery %s)\n", acpi_device_bid(device), | |
| device->status.battery_present ? "present" : "absent"); | |
| result = devm_acpi_battery_init_wakeup(dev); | |
| if (result) | |
| return result; | |
| result = devm_acpi_install_notify_handler(dev, ACPI_ALL_NOTIFY, | |
| acpi_battery_notify, battery); | |
| if (result) | |
| return result; | |
| battery->pm_nb.notifier_call = battery_notify; | |
| return register_pm_notifier(&battery->pm_nb); | |
| } | |
| static void acpi_battery_remove(struct platform_device *pdev) | |
| { | |
| struct acpi_battery *battery = platform_get_drvdata(pdev); | |
| unregister_pm_notifier(&battery->pm_nb); | |
| } | |
| /* this is needed to learn about changes made in suspended state */ | |
| static int acpi_battery_resume(struct device *dev) | |
| { | |
| struct acpi_battery *battery = dev_get_drvdata(dev); | |
| if (!battery) | |
| return -EINVAL; | |
| battery->update_time = 0; | |
| guard(mutex)(&battery->update_lock); | |
| acpi_battery_update(battery, true); | |
| return 0; | |
| } | |
| static DEFINE_SIMPLE_DEV_PM_OPS(acpi_battery_pm, NULL, acpi_battery_resume); | |
| static struct platform_driver acpi_battery_driver = { | |
| .probe = acpi_battery_probe, | |
| .remove = acpi_battery_remove, | |
| .driver = { | |
| .name = "acpi-battery", | |
| .acpi_match_table = battery_device_ids, | |
| .pm = pm_sleep_ptr(&acpi_battery_pm), | |
| .probe_type = PROBE_PREFER_ASYNCHRONOUS, | |
| }, | |
| }; | |
| static int __init acpi_battery_init(void) | |
| { | |
| if (acpi_disabled || acpi_quirk_skip_acpi_ac_and_battery()) | |
| return -ENODEV; | |
| dmi_check_system(bat_dmi_table); | |
| return platform_driver_register(&acpi_battery_driver); | |
| } | |
| static void __exit acpi_battery_exit(void) | |
| { | |
| platform_driver_unregister(&acpi_battery_driver); | |
| battery_hook_exit(); | |
| } | |
| module_init(acpi_battery_init); | |
| module_exit(acpi_battery_exit); |