| // SPDX-License-Identifier: GPL-2.0 | |
| /* | |
| * Timer present on EcoNet EN75xx MIPS based SoCs. | |
| * | |
| * Copyright (C) 2025 by Caleb James DeLisle <cjd@cjdns.fr> | |
| */ | |
| #include <linux/io.h> | |
| #include <linux/cpumask.h> | |
| #include <linux/interrupt.h> | |
| #include <linux/clockchips.h> | |
| #include <linux/sched_clock.h> | |
| #include <linux/of.h> | |
| #include <linux/of_irq.h> | |
| #include <linux/of_address.h> | |
| #include <linux/cpuhotplug.h> | |
| #include <linux/clk.h> | |
| #define ECONET_BITS 32 | |
| #define ECONET_MIN_DELTA 0x00001000 | |
| #define ECONET_MAX_DELTA GENMASK(ECONET_BITS - 2, 0) | |
| /* 34Kc hardware has 1 block and 1004Kc has 2. */ | |
| #define ECONET_NUM_BLOCKS DIV_ROUND_UP(NR_CPUS, 2) | |
| static struct { | |
| void __iomem *membase[ECONET_NUM_BLOCKS]; | |
| u32 freq_hz; | |
| } econet_timer __ro_after_init; | |
| static DEFINE_PER_CPU(struct clock_event_device, econet_timer_pcpu); | |
| /* Each memory block has 2 timers, the order of registers is: | |
| * CTL, CMR0, CNT0, CMR1, CNT1 | |
| */ | |
| static inline void __iomem *reg_ctl(u32 timer_n) | |
| { | |
| return econet_timer.membase[timer_n >> 1]; | |
| } | |
| static inline void __iomem *reg_compare(u32 timer_n) | |
| { | |
| return econet_timer.membase[timer_n >> 1] + (timer_n & 1) * 0x08 + 0x04; | |
| } | |
| static inline void __iomem *reg_count(u32 timer_n) | |
| { | |
| return econet_timer.membase[timer_n >> 1] + (timer_n & 1) * 0x08 + 0x08; | |
| } | |
| static inline u32 ctl_bit_enabled(u32 timer_n) | |
| { | |
| return 1U << (timer_n & 1); | |
| } | |
| static inline u32 ctl_bit_pending(u32 timer_n) | |
| { | |
| return 1U << ((timer_n & 1) + 16); | |
| } | |
| static bool cevt_is_pending(int cpu_id) | |
| { | |
| return ioread32(reg_ctl(cpu_id)) & ctl_bit_pending(cpu_id); | |
| } | |
| static irqreturn_t cevt_interrupt(int irq, void *dev_id) | |
| { | |
| struct clock_event_device *dev = this_cpu_ptr(&econet_timer_pcpu); | |
| int cpu = cpumask_first(dev->cpumask); | |
| /* Each VPE has its own events, | |
| * so this will only happen on spurious interrupt. | |
| */ | |
| if (!cevt_is_pending(cpu)) | |
| return IRQ_NONE; | |
| iowrite32(ioread32(reg_count(cpu)), reg_compare(cpu)); | |
| dev->event_handler(dev); | |
| return IRQ_HANDLED; | |
| } | |
| static int cevt_set_next_event(ulong delta, struct clock_event_device *dev) | |
| { | |
| u32 next; | |
| int cpu; | |
| cpu = cpumask_first(dev->cpumask); | |
| next = ioread32(reg_count(cpu)) + delta; | |
| iowrite32(next, reg_compare(cpu)); | |
| if ((s32)(next - ioread32(reg_count(cpu))) < ECONET_MIN_DELTA / 2) | |
| return -ETIME; | |
| return 0; | |
| } | |
| static int cevt_init_cpu(uint cpu) | |
| { | |
| struct clock_event_device *cd = &per_cpu(econet_timer_pcpu, cpu); | |
| u32 reg; | |
| pr_debug("%s: Setting up clockevent for CPU %d\n", cd->name, cpu); | |
| reg = ioread32(reg_ctl(cpu)) | ctl_bit_enabled(cpu); | |
| iowrite32(reg, reg_ctl(cpu)); | |
| enable_percpu_irq(cd->irq, IRQ_TYPE_NONE); | |
| /* Do this last because it synchronously configures the timer */ | |
| clockevents_config_and_register(cd, econet_timer.freq_hz, | |
| ECONET_MIN_DELTA, ECONET_MAX_DELTA); | |
| return 0; | |
| } | |
| static u64 notrace sched_clock_read(void) | |
| { | |
| /* Always read from clock zero no matter the CPU */ | |
| return (u64)ioread32(reg_count(0)); | |
| } | |
| /* Init */ | |
| static void __init cevt_dev_init(uint cpu) | |
| { | |
| iowrite32(0, reg_count(cpu)); | |
| iowrite32(U32_MAX, reg_compare(cpu)); | |
| } | |
| static int __init cevt_init(struct device_node *np) | |
| { | |
| int i, irq, ret; | |
| irq = irq_of_parse_and_map(np, 0); | |
| if (irq <= 0) { | |
| pr_err("%pOFn: irq_of_parse_and_map failed", np); | |
| return -EINVAL; | |
| } | |
| ret = request_percpu_irq(irq, cevt_interrupt, np->name, &econet_timer_pcpu); | |
| if (ret < 0) { | |
| pr_err("%pOFn: IRQ %d setup failed (%d)\n", np, irq, ret); | |
| goto err_unmap_irq; | |
| } | |
| for_each_possible_cpu(i) { | |
| struct clock_event_device *cd = &per_cpu(econet_timer_pcpu, i); | |
| cd->rating = 310; | |
| cd->features = CLOCK_EVT_FEAT_ONESHOT | | |
| CLOCK_EVT_FEAT_C3STOP | | |
| CLOCK_EVT_FEAT_PERCPU; | |
| cd->set_next_event = cevt_set_next_event; | |
| cd->irq = irq; | |
| cd->cpumask = cpumask_of(i); | |
| cd->name = np->name; | |
| cevt_dev_init(i); | |
| } | |
| cpuhp_setup_state(CPUHP_AP_ONLINE_DYN, | |
| "clockevents/econet/timer:starting", | |
| cevt_init_cpu, NULL); | |
| return 0; | |
| err_unmap_irq: | |
| irq_dispose_mapping(irq); | |
| return ret; | |
| } | |
| static int __init timer_init(struct device_node *np) | |
| { | |
| int num_blocks = DIV_ROUND_UP(num_possible_cpus(), 2); | |
| struct clk *clk; | |
| int ret; | |
| clk = of_clk_get(np, 0); | |
| if (IS_ERR(clk)) { | |
| pr_err("%pOFn: Failed to get CPU clock from DT %ld\n", np, PTR_ERR(clk)); | |
| return PTR_ERR(clk); | |
| } | |
| econet_timer.freq_hz = clk_get_rate(clk); | |
| for (int i = 0; i < num_blocks; i++) { | |
| econet_timer.membase[i] = of_iomap(np, i); | |
| if (!econet_timer.membase[i]) { | |
| pr_err("%pOFn: failed to map register [%d]\n", np, i); | |
| return -ENXIO; | |
| } | |
| } | |
| /* For clocksource purposes always read clock zero, whatever the CPU */ | |
| ret = clocksource_mmio_init(reg_count(0), np->name, | |
| econet_timer.freq_hz, 301, ECONET_BITS, | |
| clocksource_mmio_readl_up); | |
| if (ret) { | |
| pr_err("%pOFn: clocksource_mmio_init failed: %d", np, ret); | |
| return ret; | |
| } | |
| ret = cevt_init(np); | |
| if (ret < 0) | |
| return ret; | |
| sched_clock_register(sched_clock_read, ECONET_BITS, | |
| econet_timer.freq_hz); | |
| pr_info("%pOFn: using %u.%03u MHz high precision timer\n", np, | |
| econet_timer.freq_hz / 1000000, | |
| (econet_timer.freq_hz / 1000) % 1000); | |
| return 0; | |
| } | |
| TIMER_OF_DECLARE(econet_timer_hpt, "econet,en751221-timer", timer_init); |